summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
Commit message (Collapse)AuthorAgeFilesLines
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardjuhosg2011-12-273-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial support for Sitecom WL-351 v1 002juhosg2011-12-233-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for the Senao/EnGenius ESR-9753 boardjuhosg2011-12-234-0/+22
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Omnima MiniEMBWiFi boardjuhosg2011-12-142-0/+4
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix mac addresses on the DIR-300/600 boardsjuhosg2011-12-061-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: set mac addresses for the NBG-419Njuhosg2011-12-051-0/+5
| | | | | | Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move ramips_get_mac_* functions to lib/ramips.shjuhosg2011-12-051-33/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add ramips_ prefix to get_mac_{binary,nvram} functionsjuhosg2011-12-051-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix network configuration setupjuhosg2011-12-051-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: setup default network configuration for RT-N15juhosg2011-12-011-1/+9
| | | | | | Based on a patch by Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove default network configuration, and generate that from ↵juhosg2011-12-011-1/+8
| | | | | | uci-defaults git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use /lib/functions/uci-defaults.shjuhosg2011-12-011-26/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: simplify uci-defaults/network scriptjuhosg2011-12-011-50/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: setup mac and network interfaces from separate functionsjuhosg2011-12-011-8/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Sparklan wcr-150gn board fixesjuhosg2011-12-011-1/+1
| | | | | | | | | | | | * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: setup bc2 mac addresses from the generic network scriptjuhosg2011-12-012-36/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: combine network setup for all boards in one filejuhosg2011-12-012-39/+116
| | | | | | | | | | | | | Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support for NexAira BC2juhosg2011-10-243-0/+40
| | | | | | | | | The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: combine led setup for all boards in one filejuhosg2011-10-245-85/+34
| | | | | | | | | This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the ZyXEL NBG-419N boardjuhosg2011-08-222-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: support for wr512-3gn-like routersjuhosg2011-08-191-1/+2
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix wireless on Belkin F5D8235 v2juhosg2011-08-191-2/+5
| | | | | | | | Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28050 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use maccalc instead of hexdump + sedjuhosg2011-08-151-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28007 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: fix mac addresses on the Netcore NW718 boardjuhosg2011-08-151-0/+24
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28006 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add uci-defaults scripts to preconfigure USB LEDsjuhosg2011-08-154-0/+96
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28000 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Argus ATP-52Bjuhosg2011-08-151-0/+1
| | | | | | | | [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Netcore NW718 boardjuhosg2011-07-282-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Asus RT-G32 B1 boardjuhosg2011-07-281-0/+4
| | | | | | Based on a patch by: Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsjuhosg2011-07-282-2/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: rename LEDs on the DIR-300-B1juhosg2011-07-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27806 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: fix uci-defaults/network script for the RT3350 based boardsjuhosg2011-07-281-2/+2
| | | | | | | | | | | This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27804 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add diag support for RT-N15 and PWH2004juhosg2011-07-061-6/+12
| | | | | | Also sort the board names alphabetically. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27478 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use the 'router' LED for diagnostic on the WHR-G300N boardjuhosg2011-07-061-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27477 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add hotplug script to extract eeprom for the rt2x00 driverjuhosg2011-07-031-0/+55
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27393 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: initial board support for MOFI3500-3GNjuhosg2011-04-041-0/+3
| | | | | | | | | | This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add sysupgrade and status LED support for HW550-3Gjuhosg2011-03-271-1/+4
| | | | | | | | | This patch adds sysupgrade and status LED support for the Aztech HW550-3G. Some LED GPIOs were changed for clarity. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: use shutdown instead of stop when the system goes down (patch by ↵nbd2010-12-131-1/+1
| | | | | | tripolar) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add diag supportjuhosg2010-04-111-0/+63
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20799 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] adds ethernet driver, esw needs to be moved to swconfig, driver is ↵blogic2009-10-231-0/+13
| | | | | | missing rt288x support, not a platform device yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18128 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] initial support for RT288x/RT305xjuhosg2009-08-301-0/+4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17439 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 18:36:54 +0000