summaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6/files/drivers/net/phy
Commit message (Collapse)AuthorAgeFilesLines
* ip17xx: Initialize VLAN state upon resetjuhosg2010-06-081-5/+15
| | | | | | | | | | | | | | | Let VLAN state variables be initialized not only when the enable VLAN bit is toggled, but also upon reset. At this point, this should be a no-op, since the driver reads the current hardware state before doing any modifications anyway, but I plan to keep some state locally in the subsequent patches. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21716 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Introduce vlan arrayjuhosg2010-06-081-12/+14
| | | | | | | | | | Replace vlan_ports array in struct ip175c_state by an array of structures. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Introduce indirection of low-level operationsjuhosg2010-06-081-49/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces seperation between low-level and high-level parts of the driver. The low-level functions are now called via pointers stored in struct ip175c_regs. The only functional changes are: o correct_vlan_state() is now called as a part of every update_state(). o The order of setting of MODE_REG and resetting switch ports has changed. (These are independent actions, so it should not matter.) o ip175c_set_tagged() sets the tags via update_state() instead of writing directly to the registers. o The same for ip175c_set_pvid(). The only gaps in this abstraction are operations on ports (get_port_speed and friends), which access PHY registers directly. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21714 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Fix use of MODE_VALjuhosg2010-06-081-1/+1
| | | | | | | | | | | | | The value written to MODE_REG in ip175c_reset() should be obviously MODE_VAL, not RESET_VAL. Actually, this change is a NOP, because in the only case where the MODE_REG is used, the two values are identical, but it makes the code more readable. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21713 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Fix indentation in get_state() and update_state()juhosg2010-06-081-76/+76
| | | | | | | | Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21712 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Fixed error handling in ip175c_set_val()juhosg2010-06-081-1/+1
| | | | | | | | | | Upon error, ip175c_set_val() returned 0 instead of -EINVAL. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Cosmetic cleanupsjuhosg2010-06-081-50/+35
| | | | | | | | | | | Trying to unify capitalization and formatting of comments. Writing of periods at the end of comments is however still inconsistent. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21710 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ip17xx: Consolidate operations with PHY registersjuhosg2010-06-081-47/+40
| | | | | | | | | | | | | | | | Call mdiobus_{read,write} instead of duplicating their code. Introduce ip_phy_write_masked(), which changes a part of a register. Will be used later in this patch series. Please note that it does not hold any lock between reading and writing, so it is up to the caller to serialize. Also add DUMP_MII_IO, which enables logging of all MII accesses. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: Fix a bug in use of SWITCH_PORT_FLAG_TAGGEDjuhosg2010-06-081-1/+1
| | | | | | | | | | SWITCH_PORT_FLAG_TAGGED is a bit index, not a bit mask. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21708 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: Add cpu port index to help output.juhosg2010-04-161-0/+1
| | | | | | | | | | | | | | Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] swconfig: Check vlan/port indexes for validity.florian2010-04-111-0/+4
| | | | | | | | | | | | Swconfig needs to make sure that requested vlans/ports actually exist, else it might read or modify memory not belonging to itself. This patch adds a quick range check in swconfig's kernel part to prevent accidential or intentional memory modification. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Generic: Clean up output of AR8216 driver.juhosg2010-04-101-6/+8
| | | | | | | | | | | | | | | | | This patch is rather a cosmetic patch. It fixes the following issues: * Demote the unknown device message to debug level to not spam the log. * Fix the version print of the unknown device message. * Output the 'attach' message only when attaching as switch driver, not when attaching as phy driver. * Correctly return NET_RX_DROP when dropping packets. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc: bacfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20773 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: make chip detection more reliable in the AR8216 driverjuhosg2010-04-091-2/+22
| | | | | | | | | Fixes broken ethernet on the Planex MZK-W04NU/W300NH boards. Cc: bacfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20753 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH 1/2] Add support for the ar8316 switch.jow2010-04-052-38/+215
| | | | | | | | | | | | | This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)nbd2010-03-281-20/+46
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: fix the mtu register definitionnbd2010-03-091-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20110 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Several small fixes for ar8216 driver (patch by Jonas Gorski)nbd2010-03-092-12/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Create defines for some magic values/masks. * Change vlan_id to u16, to allow VIDs > 255. * Add a range check to set_pvid as it isn't a VID, but the index in the vlan table. * Set the max VID to 4094, since 4095 is a reserved value and should not be used. * In mangle_rx replace the provided VID with the VID of the table entry of the port, not the index of the table. * In hw_apply, remove a redundant emptyness check (was already checked several lines above). * In no vlan mode do not set the ingress mode to secure, as there are no vlan table entries, but to use the port's destination masks. Otherwise the switch won't forward anything. * In read_status tell that the phy is up (taken from the rtl8306 driver). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add driver for the RTL8366RB switchjuhosg2010-02-241-0/+1752
| | | | | | | Thanks to Andrew Tarabaras. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix typos in the AR8216 header filejuhosg2010-02-241-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19834 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtl8366_smi: sanitize gpio values to a 0/1 booleanjuhosg2010-01-301-5/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19402 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtl8366s: reset the chip early, this allows ethernet to work as soon as possiblejuhosg2010-01-271-20/+34
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtl8366: make it available on all platformsjuhosg2010-01-253-0/+2048
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtl8306: manage the wan port as a separate phy device with proper link ↵nbd2009-12-091-27/+89
| | | | | | status reading and autonegotiation - the genphy driver does not handle it properly git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the ↵nbd2009-12-081-0/+3
| | | | | | wrt160nl, fixes wan port detection (#6309) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix link status detection in various switch driversnbd2009-12-084-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18698 3c298f89-4303-0410-b956-a3cf2f4a3e73
* move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic ↵nbd2009-09-162-19/+27
| | | | | | files directory and remove patches for older kernel versions (no longer in use) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17594 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add a driver for rtl8306 switchesnbd2009-08-141-0/+993
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17248 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: rename the vlan attribute to enable_vlan to keep it consistent with ↵nbd2009-07-111-1/+1
| | | | | | other drivers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: fix transmission of large frames by setting the switch mtunbd2009-06-292-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: add delay for page switching to work around register setting ↵nbd2009-06-142-5/+123
| | | | | | corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix a crash in ip175c attribute enumerationnbd2009-04-301-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add a driver for Atheros AR8216 switchesnbd2009-04-292-0/+675
| | | | | | Thanks to Vertical Communications, Inc. for providing access to the documentation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add a generic switch reset callnbd2009-04-282-10/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* clean up the ip175c driver some more, add support for setting the pvid and ↵nbd2009-04-201-105/+91
| | | | | | fix querying the phy status git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add a generic method for setting the port primary vlan id (used ↵nbd2009-04-201-7/+40
| | | | | | for transparently fixing up pvid for untagged port when setting vlan ports) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)nbd2009-04-201-0/+1342
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: treat struct switch_attr as constantnbd2009-04-201-9/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: remove old debugging stuffnbd2009-04-201-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvswitch: re-enable header modenbd2009-04-101-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: in later kernels, vlan 0 no longer works as expected, switch to ↵nbd2009-03-221-3/+5
| | | | | | (1,2) instead of (0,1) for lan/wan git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware ↵nbd2009-03-222-52/+40
| | | | | | detection git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* improve routing/nat performance for devices using the marvell 88e6060 switchnbd2008-10-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
* change the way ./files* and the generic kernel files are applied. ./files ↵nbd2008-10-181-0/+872
| | | | | | now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add missing defines for mvswitchnbd2008-07-211-1/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* some more mvswitch fixes:nbd2008-07-191-27/+54
| | | | | | | | - initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add extra safety for the packet mangling in the mvswitch drivernbd2008-07-191-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* set marvell switch ATU ageing time to minimum instead of maximum - hopefully ↵nbd2008-06-092-1/+3
| | | | | | fixes some fonera 2.0 ethernet issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
* enable a different pseudo-vlan mode in the marvell switch (uses a ↵nbd2008-04-292-23/+85
| | | | | | proprietary header instead of a proprietary trailer) - fixes some mtu issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* allow bigger packets in the marvell switch (does not fix the mtu problems yet)nbd2008-04-281-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix vlan mapping for cpu port on the marvell switchnbd2008-04-241-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-05 21:42:06 +0000