summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx
Commit message (Collapse)AuthorAgeFilesLines
* [brcm63xx] add ehci support to DWV-S0 board (#9059)florian2011-07-167-8/+28
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697)florian2011-07-132-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif blockflorian2011-07-064-20/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks ↵cshore2011-07-061-1/+1
| | | | | | Image Generator) - the module is built into the kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless ↵cshore2011-07-061-1/+1
| | | | | | tools...should be just wlc git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] hw553: fix missing has_uart0 in board definition (#9533)florian2011-07-0415-26/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27448 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel to 2.6.39.2hauke2011-06-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update ssb and bcma to linux-next next-20110627 hauke2011-06-271-111/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove gpiodev, prefer sysfs gpioflorian2011-06-2517-63/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] register SSB sprom after ethernet devicesflorian2011-06-225-4/+84
| | | | | | | In case the MAC address pool is not big enough to also register a SSB SPROM prefer registering the Ethernet devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fix tab damage in 141-led_count.patchflorian2011-06-212-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix and make usable kmod-pcmcia-rsrcflorian2011-06-211-1/+1
| | | | | | This module is also needed for e.g: kmod-bcm63xx-pcmcia git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] use macros to generate SPI registers table and switchesflorian2011-06-212-244/+96
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] dev-spi.c checks for running CPU, not board codeflorian2011-06-194-10/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fixup patches after r27234florian2011-06-1917-39/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove accidental bcm6345 related patchesflorian2011-06-193-628/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove support for 2.6.37 and 2.6.38florian2011-06-1979-10073/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] switch to 2.6.39florian2011-06-1926-47/+1302
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add support for Linux 3.0-rc3florian2011-06-1637-0/+4575
| | | | | | Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add support for 2.6.39florian2011-05-2738-0/+4717
| | | | | | | | Add support for Kernel 2.6.39. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add support for 2.6.38florian2011-05-2738-0/+4725
| | | | | | | | Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27018 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patchflorian2011-05-267-98/+34
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27014 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] renumber patches accordinglyflorian2011-05-2625-64/+60
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27013 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] renumber board patchesflorian2011-05-2612-20/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27012 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for BT Voyager 2110 (#8810)florian2011-05-204-1/+93
| | | | | | Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for DSL-2640B rev B2florian2011-05-204-2/+91
| | | | | | Signed-off-by: Adrian Feliks <mexit@o2.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] refresh patchesflorian2011-05-2010-22/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for D-Link DVA-G3810BN/TLflorian2011-05-203-0/+35
| | | | | | | | This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for BT Voyager 2500 (#9070)florian2011-05-202-1/+115
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for USR9108 LEDs (#9372)florian2011-05-201-0/+22
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Add support for the T-Home Speedport W 303Vflorian2011-05-114-0/+120
| | | | | | | | | Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Update support for the DSL-274xB revision Cflorian2011-05-114-24/+31
| | | | | | | | | | | | | Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Accept any led with power in its name as power ledflorian2011-05-111-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Decouple Board ID and image name for fixupflorian2011-05-111-9/+9
| | | | | | | | | Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fill maintainer infos for a couple of targetsflorian2011-05-061-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: when detecting a ssb pci device without an own sprom write the ↵hauke2011-05-052-26/+12
| | | | | | sprom data from the platform device to the correct pointer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add fallback sprom for pci devices without an own sprom.hauke2011-05-018-26/+182
| | | | | | | | | | | | | | If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: remove patches/configs for 2.6.35nbd2011-04-1736-5855/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... ↵cshore2011-04-172-0/+108
| | | | | | subdir instead if target.... in trunk branch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Generate images for RTA1320_16M-based routerscshore2011-04-151-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Move the OpenWrt rootfs length fieldcshore2011-04-152-5/+5
| | | | | | | | | | | | | | | | Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Update to version 2.6.37.6hauke2011-04-031-1/+1
| | | | | | | Thank you Peter Wagner for the patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26441 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 ↵cshore2011-03-311-1/+1
| | | | | | devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26387 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Really fix the flash driver in 2.6.37florian2011-03-071-0/+45
| | | | | | | | Read back the actual rootfs length from the image tag. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25938 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fix patches after 2.6.37 update, patch from KanjiMonsterflorian2011-03-012-28/+29
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for 2.6.37, patches from KanjiMonsterflorian2011-02-2030-0/+4186
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for HW553 bcm6358-based boards (#8844)florian2011-02-192-0/+102
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] add support for 'MAGIC' bcm6348-based boardflorian2011-02-192-1/+90
| | | | | | | | | | | | | | | I wrote a patch to add 96348SV board (aka MAGIC) support to trunk. In my case I've found it in a Telsey "Alice W-Gate" router, fairly common (in the past) in Italy. I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2 relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c ) Thanks to KanjiMonster for the support on the IRC channel. Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25584 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] update to 2.6.35.11florian2011-02-191-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25582 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] fix T-Com Speedport W 500V default configflorian2011-02-091-0/+0
| | | | | | | | The device is called SPW500V, not SP500W. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25431 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 22:23:25 +0000