summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx
Commit message (Expand)AuthorAgeFilesLines
...
* Add hostapd-mini to default images where applicableagb2009-01-022-5/+5
* Fix the default negotiation to be 10Mbits HD on some devices (#4224)florian2008-12-121-0/+14
* move THERMAL symbols into the generic configkaloz2008-11-251-1/+0
* [kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patchesjuhosg2008-11-121-1/+1
* Build b43, b43legacy and ath9k for kernels >= 2.6.27 from mac80211. Include b...florian2008-11-091-1/+1
* [kernel] update to 2.6.25.19, and refresh patchesjuhosg2008-11-0721-123/+121
* turn the wrtsl54gs workaround into a more generic fix and reduce the chance o...nbd2008-11-021-36/+18
* [brcm47xx] fix boot failure on some boardsjuhosg2008-10-201-0/+108
* change the way ./files* and the generic kernel files are applied. ./files now...nbd2008-10-1815-0/+0
* Add workaround for eth0/1 PHY on WRTSL54GSnoz2008-10-021-0/+51
* [ath5k] create a profile for brcm47xx and ixp4xxagb2008-09-271-0/+17
* [brcm47xx] make b43 the default profileagb2008-09-272-4/+4
* [kernel] update to 2.6.26.5 and 2.6.25.17juhosg2008-09-261-1/+1
* disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable i...nico2008-09-241-0/+1
* [kernel] update to 2.6.26.3 and 2.6.25.16juhosg2008-08-221-1/+1
* [brcm47xx] refresh 2.6.23 patchesjuhosg2008-08-1428-550/+373
* Now we have b43 working in master mode, include b43 in the profile (#3827)florian2008-08-131-1/+1
* [kernel] update to 2.6.25.15 and 2.6.26.2juhosg2008-08-071-1/+1
* [kernel] update to 2.6.25.12juhosg2008-07-263-17/+11
* [brcm47xx] fix compile error (closes #3799)juhosg2008-07-221-5/+3
* Update gpiommc to use configfsmb2008-07-201-0/+44
* Disable ubsec ssb by default on WGT634U until it gets fixedflorian2008-07-161-1/+1
* Include ubsec ssb in the WGT634U profileflorian2008-07-151-1/+1
* [brcm47xx] On embedded devices we must not route the interrupts through the PCInoz2008-07-081-0/+26
* update targets to 2.6.25.10kaloz2008-07-051-1/+1
* upgrade to 2.6.25.9kaloz2008-06-261-1/+1
* [kernel] upgrade to 2.6.25.7, and refresh patchesjuhosg2008-06-1718-331/+221
* [brcm47xx] Fix TG3 build. Thanks Hauke Mehrtensnoz2008-06-161-4/+4
* upgrade to 2.6.25.6kaloz2008-06-111-1/+1
* [brcm47xx] Update 2.6.25 confignoz2008-06-031-26/+45
* [brcm47xx] Build against 2.6.25.4noz2008-06-031-1/+1
* [brcm47xx] Remove obsolete CFE workaround, now proper fix went in r11275noz2008-05-271-23/+0
* Add a WL500GPv1 profile (#3395)florian2008-05-221-0/+16
* Revert last 3 commits made in error. Proper versions will come laternoz2008-05-202-3/+1
* Build brcm47xx against 2.6.25.1noz2008-05-201-1/+1
* Update generic-2.6 and brcm47xx 2.6.25 configsnoz2008-05-201-0/+2
* [brcm47xx] refresh kernel patchesjuhosg2008-05-1946-492/+497
* [brcm47xx] Fix kmap_coherent use on 2.6.25 kernelsnoz2008-05-181-8/+30
* [kernel] upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2....juhosg2008-05-181-1/+1
* [generic-2.6] Remove files now present upstream in files-2.6.25noz2008-05-1646-4747/+1054
* enable proper PCI & USB support detection at config-time by disabling CONFIG_...nico2008-05-091-0/+2
* [brcm47xx] fix GENERIC_GPIO supportjuhosg2008-05-022-0/+0
* [brcm47xx] Disable CONFIG_CONNECTOR in config-2.6.23agb2008-05-011-1/+0
* properly disable CONFIG_CRYPTO_HWnico2008-04-271-1/+0
* First step to upgrade of brcm47xx to kernel version 2.6.25noz2008-04-2544-0/+7824
* Fix b44 phyaddr by applying the PHY-address mask. Closes #3712agb2008-03-231-0/+15
* linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interf...mb2008-03-211-24/+24
* bcm47xx: Fix warningmb2008-03-191-1/+1
* bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpiomb2008-03-191-0/+17
* bcm47xx: Fix GPIO data direction output bit assignmentmb2008-03-151-1/+2
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 13:51:38 +0000