summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Make wget2nand fail if copying the kernel fails and use the correct ↵juhosg2010-05-141-2/+5
| | | | | | | | | | | | | | | file extension for the rootfs image wget2nand didnt check the exit status after copying the kernel, if the copying failed for some reason ( for example not enougs space on the kernel partition) it simply continued extracting the rootfs. I also changed the filename, which wget2nand trys to download ( .tar.gz instead of .tgz ). Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix nbg460n mtd partitionsjuhosg2010-05-141-5/+12
| | | | | | | | | This fixes the NBG460N/550N/550NH mtd partitions. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21443 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove madwifi from the default profilenbd2010-05-081-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21406 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the lzma kernel and a proper size limit for pb92nbd2010-05-081-4/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove some bogus kernel config overridesnbd2010-05-073-6/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21397 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new subtarget for nand based devices - saves around 44k on the ↵nbd2010-05-0725-36/+61
| | | | | | lzma compressed generic kernel image git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21396 3c298f89-4303-0410-b956-a3cf2f4a3e73
* buildsystem: rename tgz/TGZ "feature" and matching options to targz/TARGZnico2010-04-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new default profile containing all drivers for all boardsnbd2010-04-273-2/+18
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21209 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sync to kernel 2.6.32.12acoul2010-04-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21195 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create separate 'factory' and 'sysupgrade' images for the Planexjuhosg2010-04-261-4/+4
| | | | | | | boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21175 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove config partition from the mtd map on the MZK-W300NH boardjuhosg2010-04-261-6/+2
| | | | | | | This space can be used to extend the rootfs_data partition. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21173 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix firmware partition size on the MZK-W04NU boardjuhosg2010-04-261-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build different firmware images for the DIR-825-Bx boardsjuhosg2010-04-261-7/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21171 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create smaller sysupgrade images for the WRT400N boardjuhosg2010-04-261-4/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21170 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create firmware images for the TL-WR941ND v3 boardsjuhosg2010-04-262-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21169 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create separate 'factory' and 'sysupgrade' images for the WRT160NLjuhosg2010-04-261-1/+4
| | | | | | | | The 'factory' image requires the garbage at the end of the image. Flashing from the original web interface does not work without that. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21168 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: remove rx alignment code for small packets, it seems to break ipv6 ↵nbd2010-04-261-24/+0
| | | | | | for some reason (fixes #7236) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix a wifi card stability issuenbd2010-04-241-1/+26
| | | | | | | | when we receive a pci/ahb interrupt, we need to flush pending data for dma from the device, otherwise the tx path may get stuck if the completion flag of the dma descriptor is not updated at the time the tx interrupt arrives. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21143 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh patches for 2.6.34-rc5 and update md5sumjuhosg2010-04-2216-29/+29
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernelsjuhosg2010-04-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21081 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reduce button threshold value on the NBG460 boardjuhosg2010-04-211-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg2010-04-2121-40/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix mtd_layout for the DIR-615-C1 and similar devicesjuhosg2010-04-201-1/+1
| | | | | | | * Thanks to Yury Polyanskiy for the report git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: adding support for zyxel nbg460n/550n/550nh boardsjuhosg2010-04-188-0/+245
| | | | | | | | | | | This patch adds support for the zyxel nbg460n/550n/550nh routers. Currently this only works if a second stage bootloader is also flashed, as the used switch needs extra initialization. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix up alignment handlingnbd2010-04-152-26/+41
| | | | | | | | | | | - on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix image builds (broken by r20834)nbd2010-04-131-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* define a shared IMG_PREFIX variable used as a basename for image files, it ↵nico2010-04-121-16/+14
| | | | | | contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a profile for PB92nbd2010-04-101-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20778 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke clocksource init patches, it is not required since 2.6.27juhosg2010-04-093-168/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update phy masks for the Planex boardsjuhosg2010-04-092-4/+10
| | | | | | | | | This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boardsjuhosg2010-04-094-8/+52
| | | | | | | Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive ↵juhosg2010-04-092-1/+8
| | | | | | | | | functions Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: call the phy driver's netif_receive_skb()juhosg2010-04-092-3/+7
| | | | | | | | | | | | | Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers to mangle rx packets. This patch fixes it. This fixes the header mangling of the AR8216 driver. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc:backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet on final pb92 board (previous value was based on a ↵nbd2010-04-061-1/+1
| | | | | | preliminary version) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20725 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH 1/2] Add support for the ar8316 switch.jow2010-04-057-0/+41
| | | | | | | | | | | | | This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024)juhosg2010-04-033-8/+12
| | | | | | | * cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix pci on ar7241/ar7242nbd2010-03-281-3/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the wan port on pb92nbd2010-03-281-9/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reset the mdio bus on ar7241/ar7242nbd2010-03-282-1/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20528 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci defaults to fix trx header on the WRT160NL boardsjuhosg2010-03-271-0/+16
| | | | | | | * patch by Otto Solares git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update image generation and trx header parsing for the WRT160NLjuhosg2010-03-272-15/+6
| | | | | | | | * patch by Bernhard Loos * note: trailing whitespaces has been removed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stackjuhosg2010-03-271-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: introduce ag71xx_has_ar8216() helperjuhosg2010-03-273-16/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: reorganize ag71xx_rx_packet functionjuhosg2010-03-271-6/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: Add netpoll supportjuhosg2010-03-271-0/+17
| | | | | | | | | | | | This patch adds support for polling interrupts, used by netconsole and the likes. Tested on d-link dir-615 C1 using netconsole. Signed-off-by: Pat Erley <pat-lkml@erley.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20503 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add images for pb92 - no kernel size check yet, lzma images did not ↵nbd2010-03-261-0/+26
| | | | | | yet work in my tests git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20496 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add basic kernel support for pb92nbd2010-03-269-0/+186
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20495 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ar7241 and ar7242nbd2010-03-269-12/+73
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20494 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix pci link detection for ar724xnbd2010-03-262-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20493 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] wrt400n: lan ports don't need the ar8216 workaroundagb2010-03-262-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20491 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:54:29 +0000