summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* linux/ar71xx: add preliminary 2.6.37 kernel supportacoul2010-11-1035-0/+1126
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23944 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] Add support for Ubiquiti UniFi APclaudio2010-11-063-0/+43
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Configure WNDR3700 switch LED colors properly (#8103)nbd2010-11-041-10/+8
| | | | | | | | | | | For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on ↵nbd2010-11-041-15/+3
| | | | | | submitter's request git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)nbd2010-11-041-3/+15
| | | | | | | | | | | Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Set eth1 MAC address from EEPROM for WNDR3700nbd2010-11-041-2/+7
| | | | | | | | | | | | | The WNDR3700's art/caldata partition contains three MAC addresses at offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1, respectively. The existing code configures eth1's MAC address by adding 1 to eth0's instead of using the value stored in the EEPROM. This patch causes the stored value to be used directly. (On my WNDR3700s, the three stored addresses are all sequential anyway.) Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the wndr3700 antenna group setting for the first wireless chip ↵nbd2010-11-041-1/+1
| | | | | | (thx, Mark Mentovai) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23875 3c298f89-4303-0410-b956-a3cf2f4a3e73
* update kernels to 2.6.32.25 and 2.6.35.8kaloz2010-11-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and ↵nbd2010-11-034-12/+39
| | | | | | instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23822 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove some unnecessary patchesnbd2010-10-222-47/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23581 3c298f89-4303-0410-b956-a3cf2f4a3e73
* move a few more 2.6.36 config options from ar71xx to genericnbd2010-10-211-59/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: the ar7240 dsa driver is no longer used, remove it.nbd2010-10-218-1081/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23577 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the new ar7240 switch driver for tl-wa901nd as wellnbd2010-10-212-14/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23576 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix more section mismatchesnbd2010-10-214-9/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port ↵nbd2010-10-215-19/+88
| | | | | | patch to the 2.6.36 patches, add a backport patch to 2.6.32 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23574 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh kernel config for 2.6.36nbd2010-10-211-28/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23572 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove unused kernel versions, 2.6.36 should be the next targetnbd2010-10-21107-3885/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] remove remaining references to dev-ap91-eth.h, patch by Stijn Tinteljow2010-10-146-6/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵nbd2010-10-148-107/+24
| | | | | | switch driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)nbd2010-10-142-6/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: workaround an rb4xx hard-lock until we get a proper fix.acoul2010-10-081-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23327 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: (2.6.36) add a missed patchacoul2010-10-081-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23319 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add preliminary 2.6.36 kernel support (refresh patches)acoul2010-10-0837-0/+1354
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23317 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: increase rb4xx nand kernel partition size (patch by danimo)nbd2010-10-071-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel]: upgrade kernel versions to the latest stable oneskaloz2010-10-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: initial support for jjPlus JWAP003juhosg2010-10-0112-0/+136
| | | | | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AP96: Fix LAN/WAN setupnbd2010-09-281-4/+8
| | | | | | | | | LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware image for the TL-MR3420 v1 boardjuhosg2010-09-272-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TL-MR3420 v1 boardjuhosg2010-09-2711-1/+171
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: AR724[12] requires different USB setupjuhosg2010-09-272-11/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware image for the TL-WR841N v7juhosg2010-09-272-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the MDIO interface of the 2nd MAC on the ar7241juhosg2010-09-271-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move ath9k specific PCI fixup into a separate filejuhosg2010-09-2710-148/+144
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCsjuhosg2010-09-271-1/+14
| | | | | | | With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for Atheros AP96 reference boardnbd2010-09-2713-0/+228
| | | | | | | | | | | | This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not ↵nbd2010-09-051-2/+1
| | | | | | select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware images for the Zcomax boardsjuhosg2010-09-032-0/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg2010-09-0313-1/+297
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesjuhosg2010-08-3112-12/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22864 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rewrite SPI drivers for the RB4xx boardsjuhosg2010-08-3131-388/+1531
| | | | | | | | | | * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesjuhosg2010-08-2532-113/+101
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] update to 2.6.32.20florian2010-08-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't override CONFIG_SWAPjuhosg2010-08-182-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change mac address initializationjuhosg2010-08-1831-61/+101
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new driver for the ar7240 switch using swconfig.nbd2010-08-167-8/+902
| | | | | | | | hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add eap7660d board to diag.sh and sysupgradejuhosg2010-08-142-2/+5
| | | | | | | | This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)acoul2010-08-141-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after ↵jow2010-08-131-0/+13
| | | | | | sysupgrade on devices using the RTL8366s switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these ↵nbd2010-07-271-6/+0
| | | | | | values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22401 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the ubnt nanostation mnbd2010-07-231-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22370 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 14:55:18 +0000