summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: increase rb4xx nand kernel partition size (patch by danimo)nbd2010-10-071-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel]: upgrade kernel versions to the latest stable oneskaloz2010-10-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: initial support for jjPlus JWAP003juhosg2010-10-0112-0/+136
| | | | | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AP96: Fix LAN/WAN setupnbd2010-09-281-4/+8
| | | | | | | | | LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware image for the TL-MR3420 v1 boardjuhosg2010-09-272-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TL-MR3420 v1 boardjuhosg2010-09-2711-1/+171
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: AR724[12] requires different USB setupjuhosg2010-09-272-11/+27
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware image for the TL-WR841N v7juhosg2010-09-272-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the MDIO interface of the 2nd MAC on the ar7241juhosg2010-09-271-0/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move ath9k specific PCI fixup into a separate filejuhosg2010-09-2710-148/+144
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCsjuhosg2010-09-271-1/+14
| | | | | | | With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for Atheros AP96 reference boardnbd2010-09-2713-0/+228
| | | | | | | | | | | | This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not ↵nbd2010-09-051-2/+1
| | | | | | select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build firmware images for the Zcomax boardsjuhosg2010-09-032-0/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg2010-09-0313-1/+297
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesjuhosg2010-08-3112-12/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22864 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rewrite SPI drivers for the RB4xx boardsjuhosg2010-08-3131-388/+1531
| | | | | | | | | | * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesjuhosg2010-08-2532-113/+101
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] update to 2.6.32.20florian2010-08-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't override CONFIG_SWAPjuhosg2010-08-182-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change mac address initializationjuhosg2010-08-1831-61/+101
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new driver for the ar7240 switch using swconfig.nbd2010-08-167-8/+902
| | | | | | | | hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add eap7660d board to diag.sh and sysupgradejuhosg2010-08-142-2/+5
| | | | | | | | This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)acoul2010-08-141-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after ↵jow2010-08-131-0/+13
| | | | | | sysupgrade on devices using the RTL8366s switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these ↵nbd2010-07-271-6/+0
| | | | | | values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22401 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the ubnt nanostation mnbd2010-07-231-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22370 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵nbd2010-07-2214-1/+197
| | | | | | "Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set default values for the fifo cfg registers on AR724xnbd2010-07-201-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22303 3c298f89-4303-0410-b956-a3cf2f4a3e73
* update kernel versionskaloz2010-07-191-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22289 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: move ath5k_platform.h from ar71xx to generic filesjuhosg2010-07-151-30/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22189 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: in-flash macs and eeprom for mach-eap7660djuhosg2010-07-153-3/+109
| | | | | | | | | | This adds in-flash mac-addresses and calibration data for the Senao EAP7660D board. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22187 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until ↵nbd2010-07-061-1/+3
| | | | | | we've figured out what part of it causes the issue described in #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: reset the hardware during open(), this improves recovery from tx ↵nbd2010-07-041-0/+2
| | | | | | timeouts on ar724x considerably git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix a memory corruption bug that happens if you flood the interface ↵nbd2010-07-041-0/+6
| | | | | | | | with packets while it's being brought down fixes boot time crashes under load reported by matteo git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix leds-rb750 build failure on 2.6.34juhosg2010-07-011-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] fix dir-825-b1 default network config after r21905jow2010-07-011-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22005 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix commit r21993acoul2010-06-302-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21994 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't use vlan 0 for devices with rtl8366s switchjuhosg2010-06-262-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Senao EAP7660D boardjuhosg2010-06-1811-0/+128
| | | | | | | | | This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix RB750 LED configurationjuhosg2010-06-171-2/+2
| | | | | | | Patch-by: Ray Bellis git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid duplicated 'board' parameter in kernel command linejuhosg2010-06-141-8/+31
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network config for the RB433UAH boardjuhosg2010-06-121-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21765 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtypejuhosg2010-06-122-4/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: move more common options to generic configurationjuhosg2010-06-101-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * CONFIG_ABX500_CORE * CONFIG_ATOMIC64_SELFTEST * CONFIG_BRIDGE_IGMP_SNOOPING * CONFIG_CAIF * CONFIG_CEPH_FS * CONFIG_CRYSTALHD * CONFIG_DEFAULT_SECURITY_SELINUX * CONFIG_DEFAULT_SECURITY_SMACK * CONFIG_DEFAULT_SECURITY_TOMOYO * CONFIG_DT3155 * CONFIG_IP_MROUTE_MULTIPLE_TABLES * CONFIG_L2TP * CONFIG_LOGFS * CONFIG_LPC_SCH * CONFIG_MFD_JANZ_CMODIO * CONFIG_MFD_RDC321X * CONFIG_N_GSM * CONFIG_RAMOOPS * CONFIG_SERIAL_ALTERA_JTAGUART * CONFIG_SERIAL_ALTERA_UART * CONFIG_SERIAL_TIMBERDALE * CONFIG_SM_FTL * CONFIG_SQUASHFS_XATTRS git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: move some common symbols to generic configurationjuhosg2010-06-102-3/+0
| | | | | | | | | * CONFIG_MUTEX_SPIN_ON_OWNER * CONFIG_DEFAULT_HYDLA * CONFIG_DEFAULT_VENO git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21748 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: standardize CONFIG_INLINE_* symbols usagejuhosg2010-06-101-28/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21746 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: sync kernel configsjuhosg2010-06-103-100/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21745 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove more config overridesjuhosg2010-06-102-14/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21744 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix phy_mask for the RB450juhosg2010-06-091-5/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21743 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 01:57:25 +0000