summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Expand)AuthorAgeFilesLines
* ar71xx: refresh ksz8041 patchjuhosg2010-02-241-2/+2
* ar71xx: add default network configuration file for the TL-WR1043ND boardjuhosg2010-02-241-0/+31
* ar71xx: register RTL8366RB switch on the TL-WR1043NB boardjuhosg2010-02-241-3/+22
* ar71xx: enable the RTL8366RB driverjuhosg2010-02-241-0/+1
* ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND boardjuhosg2010-02-241-0/+1
* ar71xx: remove an accidentally committed patchjuhosg2010-02-241-257/+0
* ar71xx: enable TX/RX flow control on the AR7240juhosg2010-02-241-1/+6
* ar71xx: use the correct name for the status LED on the WRT400 boardjuhosg2010-02-241-1/+1
* ar71xx: update default network configuration file for the WNDR3700juhosg2010-02-241-0/+45
* ar71xx: fix mac addresses on the DIR-600 rev. A1 boardjuhosg2010-02-192-2/+13
* ar71xx: fix wireless mac address on the TL-WR741NDjuhosg2010-02-191-1/+1
* ar71xx: move AP91 specific ethernet initialization into a separate filejuhosg2010-02-197-49/+72
* ar71xx: create firmware images for the TL-WR941ND v4 boardjuhosg2010-02-192-0/+16
* ar71xx: sync kernel configjuhosg2010-02-191-13/+13
* ar71xx: add uci configuration for the WAN LED on the WNDR3700juhosg2010-02-191-0/+22
* ar71xx: add missing GPIO LED for the WNDR3700 boardjuhosg2010-02-191-0/+5
* ar71xx: fix polarity of GPIO buttons on the WNDR3700 boardjuhosg2010-02-191-0/+3
* update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolarthepeople2010-02-121-1/+1
* clean up handling of some kernel symbolskaloz2010-02-111-1/+0
* re-sort all target and subtarget config fileskaloz2010-02-111-13/+13
* ar71xx: fix WLAN mac address on the TL-WR1043NDjuhosg2010-02-101-1/+1
* ar71xx: enable CFI probe for the WZR-HP-G300NHjuhosg2010-02-091-1/+0
* ar71xx: sync kernel configjuhosg2010-02-091-4/+0
* ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700juhosg2010-02-094-6/+18
* kernel: 2.6.32: integrate m25p80 driver related patches from ar71xxjuhosg2010-02-087-68/+3
* ar71xx: drop the mx25lxxx patch, these chips are supported in 2.6.32.7 alreadyjuhosg2010-02-084-20/+6
* ar71xx: add support for the Winbond W25Q32BV SPI flash (based on thejuhosg2010-02-061-0/+10
* ar71xx: add missing fields to the ar71xx-ehci driverjuhosg2010-02-061-1/+7
* replace the hostapd-mini preselection in profiles with wpad-mininbd2010-02-0310-22/+22
* ar71xx: nuke remaining patchesjuhosg2010-01-312-268/+0
* ar71xx: nuke 2.6.3[01] stuffjuhosg2010-01-3164-2318/+0
* update to 2.6.32.7kaloz2010-01-291-2/+2
* preinit: fix mixup between led and reset button enable on some platforms (thx...nbd2010-01-281-2/+2
* ar71xx: switch to 2.6.32juhosg2010-01-283-3/+3
* kernel: move mips_machine.h to 'arch/mips/include/asm'juhosg2010-01-283-6/+6
* ar71xx: fix 'section type conflict' build errorjuhosg2010-01-263-21/+39
* add preinit modularization work by Daniel Dickinson (cshore)nbd2010-01-253-18/+33
* rtl8366: make it available on all platformsjuhosg2010-01-2510-2195/+9
* ar71xx: sync kernel configsjuhosg2010-01-252-3/+2
* rtl8366s: simplify mib counters handlingjuhosg2010-01-251-58/+48
* ar71xx: merge generic machine code into setup.cjuhosg2010-01-257-33/+10
* rtl8366_smi: move RTL8366S driver into a separate filejuhosg2010-01-2216-1769/+1853
* rtl8366_smi: rename rtl8366s specific functions and definitionsjuhosg2010-01-221-175/+173
* rtl8366_smi: move chip specific stuff into its own structjuhosg2010-01-221-192/+224
* rtl8366_smi: separate gpio initializationjuhosg2010-01-221-25/+46
* rtl8366_smi: store GPIO numbers directly in the rtl8366_smi structjuhosg2010-01-221-22/+21
* rtl8366_smi: store device pointer instead of plaform_devicejuhosg2010-01-221-19/+19
* rtl8366_smi: rename switch attribute handlersjuhosg2010-01-211-59/+59
* rtl8366_smi: simplify rtl8366_attr_get_port_link functionjuhosg2010-01-201-52/+33
* rtl8366_smi: make rtl8366_phy_config_{aneg,init} staticjuhosg2010-01-201-2/+2
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 10:03:58 +0000