summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵nbd2010-07-224-0/+154
| | | | | | "Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set default values for the fifo cfg registers on AR724xnbd2010-07-201-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22303 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: move ath5k_platform.h from ar71xx to generic filesjuhosg2010-07-151-30/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22189 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: in-flash macs and eeprom for mach-eap7660djuhosg2010-07-153-3/+109
| | | | | | | | | | This adds in-flash mac-addresses and calibration data for the Senao EAP7660D board. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22187 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until ↵nbd2010-07-061-1/+3
| | | | | | we've figured out what part of it causes the issue described in #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: reset the hardware during open(), this improves recovery from tx ↵nbd2010-07-041-0/+2
| | | | | | timeouts on ar724x considerably git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix a memory corruption bug that happens if you flood the interface ↵nbd2010-07-041-0/+6
| | | | | | | | with packets while it's being brought down fixes boot time crashes under load reported by matteo git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix leds-rb750 build failure on 2.6.34juhosg2010-07-011-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Senao EAP7660D boardjuhosg2010-06-184-0/+99
| | | | | | | | | This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid duplicated 'board' parameter in kernel command linejuhosg2010-06-141-8/+31
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtypejuhosg2010-06-122-4/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix phy_mask for the RB450juhosg2010-06-091-5/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21743 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix build error in the rb{4xx,750}_nand drivers on 2.6.34/35juhosg2010-06-092-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21736 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix phy_mask on the RB433 for the IP17xx driverjuhosg2010-06-081-4/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21728 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix 2.6.34 build errorsjuhosg2010-06-073-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21698 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix nbg460n mtd partitionsjuhosg2010-05-141-5/+12
| | | | | | | | | This fixes the NBG460N/550N/550NH mtd partitions. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21443 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove config partition from the mtd map on the MZK-W300NH boardjuhosg2010-04-261-6/+2
| | | | | | | This space can be used to extend the rootfs_data partition. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21173 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix firmware partition size on the MZK-W04NU boardjuhosg2010-04-261-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: remove rx alignment code for small packets, it seems to break ipv6 ↵nbd2010-04-261-24/+0
| | | | | | for some reason (fixes #7236) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix a wifi card stability issuenbd2010-04-241-1/+26
| | | | | | | | when we receive a pci/ahb interrupt, we need to flush pending data for dma from the device, otherwise the tx path may get stuck if the completion flag of the dma descriptor is not updated at the time the tx interrupt arrives. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21143 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reduce button threshold value on the NBG460 boardjuhosg2010-04-211-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg2010-04-2121-40/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: adding support for zyxel nbg460n/550n/550nh boardsjuhosg2010-04-184-0/+225
| | | | | | | | | | | This patch adds support for the zyxel nbg460n/550n/550nh routers. Currently this only works if a second stage bootloader is also flashed, as the used switch needs extra initialization. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix up alignment handlingnbd2010-04-152-26/+41
| | | | | | | | | | | - on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update phy masks for the Planex boardsjuhosg2010-04-092-4/+10
| | | | | | | | | This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boardsjuhosg2010-04-092-8/+16
| | | | | | | Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive ↵juhosg2010-04-092-1/+8
| | | | | | | | | functions Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: call the phy driver's netif_receive_skb()juhosg2010-04-092-3/+7
| | | | | | | | | | | | | Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers to mangle rx packets. This patch fixes it. This fixes the header mangling of the AR8216 driver. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc:backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet on final pb92 board (previous value was based on a ↵nbd2010-04-061-1/+1
| | | | | | preliminary version) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20725 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH 1/2] Add support for the ar8316 switch.jow2010-04-052-0/+2
| | | | | | | | | | | | | This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024)juhosg2010-04-033-8/+12
| | | | | | | * cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix pci on ar7241/ar7242nbd2010-03-281-3/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the wan port on pb92nbd2010-03-281-9/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reset the mdio bus on ar7241/ar7242nbd2010-03-282-1/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20528 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update image generation and trx header parsing for the WRT160NLjuhosg2010-03-271-6/+1
| | | | | | | | * patch by Bernhard Loos * note: trailing whitespaces has been removed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stackjuhosg2010-03-271-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: introduce ag71xx_has_ar8216() helperjuhosg2010-03-273-16/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: reorganize ag71xx_rx_packet functionjuhosg2010-03-271-6/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: Add netpoll supportjuhosg2010-03-271-0/+17
| | | | | | | | | | | | This patch adds support for polling interrupts, used by netconsole and the likes. Tested on d-link dir-615 C1 using netconsole. Signed-off-by: Pat Erley <pat-lkml@erley.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20503 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add basic kernel support for pb92nbd2010-03-266-0/+180
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20495 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ar7241 and ar7242nbd2010-03-269-12/+73
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20494 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix pci link detection for ar724xnbd2010-03-262-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20493 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] wrt400n: lan ports don't need the ar8216 workaroundagb2010-03-262-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20491 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the RB411 setup for the RB411Ujuhosg2010-03-211-10/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20359 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change PHY select logic, and update phy_masksjuhosg2010-03-2122-78/+37
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20358 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: check returned value of ioremap in ar71xx_pcibios_setupjuhosg2010-03-181-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20288 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: optimize register access in ar71xx_pci.cjuhosg2010-03-181-44/+50
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20287 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: optimize register access in irq.cjuhosg2010-03-181-23/+46
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: optimize register access in ar724x_pci.cjuhosg2010-03-181-37/+36
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20285 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: introduce global ar724x_pci_ctrl_base variablejuhosg2010-03-181-20/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20284 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 04:38:51 +0000