rtl819xx - Realtek rtl819xx port to OpenWrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ar71xx: register RTL8366RB switch on the TL-WR1043NB board	juhosg	2010-02-24	1	-3/+22
*	ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND board	juhosg	2010-02-24	1	-0/+1
*	ar71xx: enable TX/RX flow control on the AR7240	juhosg	2010-02-24	1	-1/+6
*	ar71xx: fix mac addresses on the DIR-600 rev. A1 board	juhosg	2010-02-19	2	-2/+13
*	ar71xx: fix wireless mac address on the TL-WR741ND	juhosg	2010-02-19	1	-1/+1
*	ar71xx: move AP91 specific ethernet initialization into a separate file	juhosg	2010-02-19	6	-49/+71
*	ar71xx: add missing GPIO LED for the WNDR3700 board	juhosg	2010-02-19	1	-0/+5
*	ar71xx: fix polarity of GPIO buttons on the WNDR3700 board	juhosg	2010-02-19	1	-0/+3
*	ar71xx: fix WLAN mac address on the TL-WR1043ND	juhosg	2010-02-10	1	-1/+1
*	ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700	juhosg	2010-02-09	4	-6/+18
*	ar71xx: add missing fields to the ar71xx-ehci driver	juhosg	2010-02-06	1	-1/+7
*	rtl8366: make it available on all platforms	juhosg	2010-01-25	4	-2069/+0
*	rtl8366s: simplify mib counters handling	juhosg	2010-01-25	1	-58/+48
*	ar71xx: merge generic machine code into setup.c	juhosg	2010-01-25	4	-28/+8
*	rtl8366_smi: move RTL8366S driver into a separate file	juhosg	2010-01-22	7	-1742/+1787
*	rtl8366_smi: rename rtl8366s specific functions and definitions	juhosg	2010-01-22	1	-175/+173
*	rtl8366_smi: move chip specific stuff into its own struct	juhosg	2010-01-22	1	-192/+224
*	rtl8366_smi: separate gpio initialization	juhosg	2010-01-22	1	-25/+46
*	rtl8366_smi: store GPIO numbers directly in the rtl8366_smi struct	juhosg	2010-01-22	1	-22/+21
*	rtl8366_smi: store device pointer instead of plaform_device	juhosg	2010-01-22	1	-19/+19
*	rtl8366_smi: rename switch attribute handlers	juhosg	2010-01-21	1	-59/+59
*	rtl8366_smi: simplify rtl8366_attr_get_port_link function	juhosg	2010-01-20	1	-52/+33
*	rtl8366_smi: make rtl8366_phy_config_{aneg,init} static	juhosg	2010-01-20	1	-2/+2
*	rtl8366_smi: simplify rtl8366_{get,set}_port_vlan_index functions	juhosg	2010-01-20	1	-39/+21
*	rtl8366_smi: minor code optimalizations	juhosg	2010-01-20	1	-8/+7
*	rtl8366_smi: coding style cleanup	juhosg	2010-01-20	1	-102/+119
*	rtl8366_smi: add Kconfig option for the debugfs stuff	juhosg	2010-01-20	1	-7/+5
*	rtl8366_smi: fix error checking in rtl8366s_set_vlan_4k_entry	juhosg	2010-01-20	1	-5/+5
*	rtl8366_smi: fix parameter checking in rtl8366_attr_get_vlan_info	juhosg	2010-01-20	1	-1/+1
*	rtl8366_smi: fix return codes in rtl8366s_reset_vlan	juhosg	2010-01-20	1	-7/+11
*	rtl8366_smi: move variable initialization out from the loop	juhosg	2010-01-20	1	-5/+5
*	rtl8366_smi: fix port->flags calculation in rtl8366_get_ports	juhosg	2010-01-20	1	-1/+2
*	ar71xx: fix ethernet mac address on the WZR-HP-G300NH	juhosg	2010-01-18	1	-1/+3
*	rtl8366_smi: use inline function instead of a macro on top of container_of	juhosg	2010-01-18	1	-17/+20
*	rtl8366_smi: reset the vlan table when resetting the switch and use vlan get/...	nbd	2010-01-18	1	-84/+48
*	rtl8366_smi: fix excessive stack usage and buffer handling bugs	nbd	2010-01-18	1	-50/+52
*	ar71xx: fix return statement in the rtl8366 driver	nbd	2010-01-17	1	-1/+1
*	rtl8366_smi: register the switch directly from the probe routine	juhosg	2010-01-17	1	-21/+36
*	rtl8366_smi: use vlanmc name for all vlanconfig variables	juhosg	2010-01-17	1	-61/+60
*	rtl8366_smi: use vlan4k name for all vlan4kentry variables	juhosg	2010-01-17	1	-26/+26
*	rtl8366_smi: move memset into the rtl8366s_get_member_config function	juhosg	2010-01-17	1	-10/+3
*	rtl8366_smi: move memset into the rtl8366s_get_vlan_4k_entry function	juhosg	2010-01-17	1	-6/+1
*	rtl8366_smi: add vid parameter to the rtl8366s_get_vlan_4k_entry function	juhosg	2010-01-17	1	-16/+8
*	ar71xx: upgrade rtl8366_smi driver	juhosg	2010-01-17	1	-75/+1434
*	ar71xx: fix phy interface selection for the RB-450G	juhosg	2010-01-17	1	-2/+2
*	Fix Routerboard 411ar on board wireless	juhosg	2010-01-17	1	-0/+4
*	ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH	juhosg	2010-01-15	4	-0/+274
*	ar71xx: add GPIO driver for the NXP 74HC153 chip	juhosg	2010-01-15	2	-0/+270
*	ar71xx: reduce button threshold values	juhosg	2010-01-13	22	-46/+46
*	ar71xx: add support for the D-Link DIR-600 rev. A1 board	juhosg	2010-01-11	4	-1/+161