summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934Xjuhosg2011-12-151-3/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: setup switch interface mode on AR934Xjuhosg2011-12-151-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: detect the built-in switch of the AR934X SoCsjuhosg2011-12-151-12/+36
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: introduce ar71xx_switch_datajuhosg2011-12-152-5/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: tplinkpart: allow to detect JFFS2 as welljuhosg2011-12-151-3/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: check PHY IDs before accessing the switch registersjuhosg2011-12-151-9/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724xjuhosg2011-12-151-13/+25
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: nuke ar7240sw_initjuhosg2011-12-151-6/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: check squashfs signature in TP-Link mtd parserjuhosg2011-12-051-1/+31
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add mtd partition parser for the TP-Link boardsjuhosg2011-12-031-0/+165
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add AR71XX_ prefix to GPIO_REG_* definesjuhosg2011-11-141-36/+40
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge nand scan patchjuhosg2011-11-142-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add support for getting switch port link statusjuhosg2011-11-131-0/+67
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xxjuhosg2011-11-132-19/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: remove unused mii_cfg related functions and definesjuhosg2011-11-131-40/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set MII interface speed from the set_speed callbacksjuhosg2011-11-131-6/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename set_pll callback to set_speed in ag71xx_platform_datajuhosg2011-11-131-2/+2
| | | | | | Also rename the corresponding callback functions. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: remove MII interface setup codejuhosg2011-11-132-15/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use fixed link parameters if the mii bus is not registeredjuhosg2011-11-121-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove dead codenbd2011-11-081-15/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: on ar7240, exclude ports from their own port vlan destination masknbd2011-11-081-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: close a race between the phy state machine and link statejogo2011-10-081-3/+7
| | | | | | | | | | | A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)nbd2011-09-111-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28213 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add some code to detect DMA stuck conditions on ar7240nbd2011-08-132-1/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: on ar724x only reset the link status in the restart handler, the ↵nbd2011-08-131-0/+6
| | | | | | fast reset takes care of DMA stuck issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet FIFO state corruption on ar7240nbd2011-08-042-20/+61
| | | | | | | | | When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix memory corruption issues on ar7240 on ethernet start/stopnbd2011-08-042-3/+19
| | | | | | | | | | | When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix MAC/MDIO reset mask handlingnbd2011-08-041-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27894 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reinitialize global switch settings after reset on ar7240nbd2011-07-201-23/+24
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: configure address aging on ar7240nbd2011-07-201-2/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reset the phy in the ethernet init on ar724xnbd2011-07-201-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make sure that rx and interrupts are disabled before issuing the ↵nbd2011-07-201-7/+9
| | | | | | hardware reset git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: increase the delay after the ethernet MAC resetnbd2011-07-201-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix an unused variable warningnbd2011-07-201-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: do not reset the hardware on transmit timeout - this would mess up ↵nbd2011-07-091-4/+0
| | | | | | the up the PHY state git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: keep the rx engine stopped while the link is not up, should ↵nbd2011-07-091-91/+91
| | | | | | hopefully fix stability issues from #9405 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge 2.6.39 patchesjuhosg2011-06-291-678/+0
| | | | | | Also remove the old UART driver for ar933x. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add 2.6.39 supportjuhosg2011-06-291-0/+688
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: cleanup AR933X UART driverjuhosg2011-06-191-481/+141
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use ar933x_uart.h in the AR933X serial driverjuhosg2011-06-131-339/+75
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: setup wdt_clock for AR913X to avoid a kernel bugjuhosg2011-06-041-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: only enable the rx engine after the link is up..."nbd2011-06-011-68/+67
| | | | | | It messes up the DMA state when the link goes down git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add serial driver for the AR933X UARTjuhosg2011-05-311-0/+1282
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27065 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: the watchdog uses the reference clock on the AR933x SoCsjuhosg2011-05-311-2/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27060 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix header offset for newer WRT160NL modelsjuhosg2011-05-311-9/+16
| | | | | | | | | | | | Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K, resulting in miscalculated partition sizes. Since the actual sizes did not change, hardcode them to their current sizes, and make sure they are at least one erase block big (in case Cisco decides to start to use chips with 128K erase blocks). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: make ring sizes configurable via ethtooljuhosg2011-05-312-0/+56
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: prepare to make ring sizes configurablejuhosg2011-05-313-35/+32
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN definejuhosg2011-05-311-1/+0
| | | | | | Reported-by: Dave Täht <dave.taht@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only enable the rx engine after the link is up, fixes a race ↵nbd2011-05-301-67/+68
| | | | | | condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable flow control for ar724x, it can get stuck in a loop of ↵nbd2011-05-301-5/+1
| | | | | | continously sending MAC pause frames git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73