summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add some code to detect DMA stuck conditions on ar7240nbd2011-08-132-1/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: on ar724x only reset the link status in the restart handler, the ↵nbd2011-08-131-0/+6
| | | | | | fast reset takes care of DMA stuck issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet FIFO state corruption on ar7240nbd2011-08-042-20/+61
| | | | | | | | | When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix memory corruption issues on ar7240 on ethernet start/stopnbd2011-08-042-3/+19
| | | | | | | | | | | When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix MAC/MDIO reset mask handlingnbd2011-08-041-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27894 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reinitialize global switch settings after reset on ar7240nbd2011-07-201-23/+24
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: configure address aging on ar7240nbd2011-07-201-2/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reset the phy in the ethernet init on ar724xnbd2011-07-201-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make sure that rx and interrupts are disabled before issuing the ↵nbd2011-07-201-7/+9
| | | | | | hardware reset git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: increase the delay after the ethernet MAC resetnbd2011-07-201-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix an unused variable warningnbd2011-07-201-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: do not reset the hardware on transmit timeout - this would mess up ↵nbd2011-07-091-4/+0
| | | | | | the up the PHY state git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: keep the rx engine stopped while the link is not up, should ↵nbd2011-07-091-91/+91
| | | | | | hopefully fix stability issues from #9405 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: only enable the rx engine after the link is up..."nbd2011-06-011-68/+67
| | | | | | It messes up the DMA state when the link goes down git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: make ring sizes configurable via ethtooljuhosg2011-05-312-0/+56
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: prepare to make ring sizes configurablejuhosg2011-05-313-35/+32
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN definejuhosg2011-05-311-1/+0
| | | | | | Reported-by: Dave Täht <dave.taht@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only enable the rx engine after the link is up, fixes a race ↵nbd2011-05-301-67/+68
| | | | | | condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable flow control for ar724x, it can get stuck in a loop of ↵nbd2011-05-301-5/+1
| | | | | | continously sending MAC pause frames git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: detect link on LAN portsmatteo2011-05-173-3/+32
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* use correct macros and frame size in ag71xxmatteo2011-05-141-3/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: make switch register access atomicjuhosg2011-05-081-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix section mismatch warningsjuhosg2011-05-082-2/+2
| | | | | | | | | | | | | | | | | | The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix build error if debugfs is enabledjuhosg2011-05-081-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add debugfs entry for [rt]x_ringjuhosg2011-05-071-0/+92
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add timestamps to ag71xx_bufjuhosg2011-05-072-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use dynamically allocated buffer for napi_statsjuhosg2011-05-071-9/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use debugfs_remove_recursivejuhosg2011-05-072-28/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus ↵nbd2011-04-023-76/+109
| | | | | | behind the switch instead git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26393 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not ↵nbd2011-04-021-4/+5
| | | | | | run them on every device open, only on tx timeouts git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26392 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOMjuhosg2010-11-121-1/+1
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23982 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use pr_* functions in driversjuhosg2010-11-121-1/+1
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23981 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: return statements does not need parenthesisjuhosg2010-11-122-7/+7
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23979 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix inline attribute locationjuhosg2010-11-121-2/+2
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23978 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wrap long linesjuhosg2010-11-122-2/+4
| | | | | | | | (build errors has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix whitespaces nitsjuhosg2010-11-125-34/+34
| | | | | | | | (build error has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix more section mismatchesnbd2010-10-214-9/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port ↵nbd2010-10-211-2/+1
| | | | | | patch to the 2.6.36 patches, add a backport patch to 2.6.32 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23574 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new driver for the ar7240 switch using swconfig.nbd2010-08-164-2/+875
| | | | | | | | hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until ↵nbd2010-07-061-1/+3
| | | | | | we've figured out what part of it causes the issue described in #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: reset the hardware during open(), this improves recovery from tx ↵nbd2010-07-041-0/+2
| | | | | | timeouts on ar724x considerably git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix a memory corruption bug that happens if you flood the interface ↵nbd2010-07-041-0/+6
| | | | | | | | with packets while it's being brought down fixes boot time crashes under load reported by matteo git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: remove rx alignment code for small packets, it seems to break ipv6 ↵nbd2010-04-261-24/+0
| | | | | | for some reason (fixes #7236) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix up alignment handlingnbd2010-04-152-26/+41
| | | | | | | | | | | - on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive ↵juhosg2010-04-092-1/+8
| | | | | | | | | functions Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: call the phy driver's netif_receive_skb()juhosg2010-04-092-3/+7
| | | | | | | | | | | | | Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers to mangle rx packets. This patch fixes it. This fixes the header mangling of the AR8216 driver. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc:backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024)juhosg2010-04-033-8/+12
| | | | | | | * cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stackjuhosg2010-03-271-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: introduce ag71xx_has_ar8216() helperjuhosg2010-03-273-16/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: reorganize ag71xx_rx_packet functionjuhosg2010-03-271-6/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20504 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 03:41:37 +0000