summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/arch/mips
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: add support for TP-Link TL-MR3020juhosg2012-01-044-0/+133
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the ALFA Network N2/N5 boardsjuhosg2012-01-014-0/+169
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsjuhosg2011-12-312-5/+68
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix LEDs on the WRT400Njuhosg2011-12-311-11/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach ↵jow2011-12-211-1/+1
| | | | | | id of the WZR-HP-AG300H, correct the id (#10649) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing wireless led changes for wzr-hp-g300nh2nbd2011-12-191-6/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the wzr-hp-g300nh2nbd2011-12-184-0/+206
| | | | | | Signed-off-by: Mark Deneen <mdeneen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: connect GMAC0 to the internal switch on DB120juhosg2011-12-151-1/+29
| | | | | | | | Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add defines for the AR934X GMAC interfacejuhosg2011-12-151-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix GMAC1 interface speed on the DB120 boardjuhosg2011-12-151-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934Xjuhosg2011-12-151-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to attach the internal switch for AR934xjuhosg2011-12-151-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: introduce ar71xx_switch_datajuhosg2011-12-153-3/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix mac addresses on jjPlus devicesjuhosg2011-12-152-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ALFA Network's Hornet-UB boardjuhosg2011-12-144-0/+145
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GPIO function bit defines for AR933Xjuhosg2011-12-141-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix gpio count for ar7241/ar7242nbd2011-12-142-2/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: register extra leds behind the wireless mac on wzr-hp-g450hnbd2011-12-143-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix wireless led on wzr-hp-g450hnbd2011-12-131-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable AR9341 support at setup.cjuhosg2011-12-131-0/+6
| | | | | | Patch-by: dyq <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2juhosg2011-12-132-2/+3
| | | | | | | | | | | | | | | | | | | The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add gpios and usb for wzr-hp-g450hnbd2011-12-131-2/+73
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use RedBoot parser on PB44juhosg2011-12-111-0/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use correct mac on the lan interface on several TP-LINK devicesjuhosg2011-12-053-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to pass negative offset values for ar71xx_init_macjuhosg2011-12-052-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not setjuhosg2011-12-051-2/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add preliminary support for wzr-hp-g450hnbd2011-12-054-0/+96
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to ↵nbd2011-12-053-72/+78
| | | | | | dev-m25p80.c, other buffalo routers use it as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rewrite WNDR3700/3800 handlingjuhosg2011-12-052-132/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the tp-link parser on the tp-link boardsjuhosg2011-12-038-267/+33
| | | | | | Also remove static partition maps. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: run the RedBoot parser only on the RedBoot based boardsjuhosg2011-12-036-9/+60
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: run the MyLoader parser only on the WP543 boardjuhosg2011-12-031-4/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: run the wrt160nl parser only on the WRT160NL boardjuhosg2011-12-031-38/+4
| | | | | | Also remove static mtd partition definitions. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Ubiquiti AirRouterjuhosg2011-12-012-0/+32
| | | | | | Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: modify phy mask of the WP543 boardjuhosg2011-11-241-2/+2
| | | | | | This fixes ethernet on newer boards. Based on a patch from #9702. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix wndr3800 machine namejuhosg2011-11-242-0/+3
| | | | | | | | This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set GE0 phy_mask for AR933xjuhosg2011-11-201-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix USB LED on the DB120 boardjuhosg2011-11-142-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a function for selecting output signal on a given GPIO pinjuhosg2011-11-142-0/+38
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix GPIO function handling on AR934xjuhosg2011-11-142-9/+35
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add AR71XX_ prefix to GPIO_REG_* definesjuhosg2011-11-144-55/+55
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix a compiler warningjuhosg2011-11-141-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix GPIO count for AR934xjuhosg2011-11-141-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934Xjuhosg2011-11-142-6/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use a dummy irq chip for WMAC and PCIe irq hadlingjuhosg2011-11-144-2/+50
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS definesjuhosg2011-11-141-0/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add an irq parameter for ar724x_pcibios_initjuhosg2011-11-143-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove hardwired interface parameters from mach-* filesjuhosg2011-11-1413-128/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: force hardwired interface parameters in ar71xx_add_device_ethjuhosg2011-11-141-1/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use if-else instead of conditional operators in ar71xx_add_device_ethjuhosg2011-11-141-48/+76
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 01:41:40 +0000