summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add initial support for the OpenMesh OM2P boardjuhosg2011-10-272-0/+6
| | | | | | Based on a patch by Marek Lindner <marek@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Buffalo WHR-HP-G300N kernel supportjuhosg2011-10-244-1/+31
| | | | | | | | | | | | | The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the Allnet ALL0258N boardjuhosg2011-10-241-0/+3
| | | | | | | | | | This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] base-files: make sure inittab-console-fixup returns with success ↵jow2011-10-241-0/+2
| | | | | | (#10275) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: ar71xx: add support for Mikrotik Routerboard RB493Gjogo2011-10-112-0/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable login only on the system console by defaultjuhosg2011-09-232-2/+25
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-Link TL-WR703N v1 boardjuhosg2011-09-214-1/+19
| | | | | | Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade on the AP96 and DB120 boardsjuhosg2011-08-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the same test for AP121 and Zcomax sysupgrade imagesjuhosg2011-08-041-9/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NHjogo2011-07-286-35/+6
| | | | | | | | Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)nbd2011-07-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] revert r27043 (#9513)jow2011-07-011-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] revert r27341, it introduce wrong behaviour for other modelsjow2011-07-011-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] turn status LED off if device finished initializingjow2011-07-011-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network config for wzr-hp-ag300h (based on a patch from ↵nbd2011-06-252-0/+29
| | | | | | #9607) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] Remove trailing spaces, convert spaces to tabsacinonyx2011-06-0912-83/+83
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: override inittab to enable login on ttyATH0nbd2011-06-071-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for the AP121 boardsjuhosg2011-05-311-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network config for the AP121 boardsjuhosg2011-05-313-0/+54
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boardsjuhosg2011-05-311-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boardsjuhosg2011-05-311-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci config for the WLAN LED on the WRT160NLjuhosg2011-05-081-0/+11
| | | | | | Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use phy0tpt trigger for the WLAN LEDsjuhosg2011-05-082-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the ar8316 switch driver on the PB92 board and add a matching ↵nbd2011-04-282-0/+34
| | | | | | default network config git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: update wget2nand scriptacoul2011-04-211-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the gpio_keys_polled driver instead of gpio_buttonsjuhosg2011-04-121-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26603 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for WZR-HP-G301NHjuhosg2011-04-125-3/+32
| | | | | | | | | | | | | | Add support for the Buffalo WZR-HP-G301NH. The only difference between it and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S. Since we don't do runtime detection of the switch, we need a separate machine definition for it. While we are at it, also rename the profile to reflect that it now is for more than one device. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default configuration for the switch on AP96nbd2011-03-151-0/+10
| | | | | | | Enables forwarding of frames between the switch ports (eth0). Patch by Jouni Malinen git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26180 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-Link TL-WA901ND v2 boardjuhosg2011-03-134-1/+18
| | | | | | Patch-by: Jonathan Benett <jbscience87@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the WNDR3700v2 boardjuhosg2011-01-265-3/+83
| | | | | | Based on a patch by Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make uci-default scripts executablejuhosg2011-01-045-0/+0
| | | | | | Reported-by: Nuno Gonçalves <nunojpg@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24897 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] unifi: add sysupgrade and leds supportclaudio2010-12-203-1/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use usbdev trigger for USB LEDs by defaultjuhosg2010-12-176-2/+96
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: populate LED configuration for WZR-HP-G300NHjuhosg2010-12-171-0/+30
| | | | | | | | Signed-off-by: Dave Lichterman <laviddichterman@gmail.com> [nand-disk trigger has been removed - juhosg] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add wlan led for the TL-WR941NDjuhosg2010-12-151-0/+22
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing files for the JA76PF boardjuhosg2010-12-101-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the jjPlus JA79PFjuhosg2010-12-103-2/+8
| | | | | | Patch-by: Cezary Jackiewicz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-LINK TL-MR3220 v1 boardjuhosg2010-12-104-3/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration file for the TL-MR3420juhosg2010-12-101-0/+24
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add nbg460n image generationjuhosg2010-12-105-1/+55
| | | | | | | | This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use ↵jow2010-12-023-6/+6
| | | | | | eth0.1 for the lan interface - this brings the configuration more in line with other switch setups git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Configure WNDR3700 switch LED colors properly (#8103)nbd2010-11-041-10/+8
| | | | | | | | | | | For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on ↵nbd2010-11-041-15/+3
| | | | | | submitter's request git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)nbd2010-11-041-3/+15
| | | | | | | | | | | Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵nbd2010-10-141-5/+9
| | | | | | switch driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)nbd2010-10-141-5/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: initial support for jjPlus JWAP003juhosg2010-10-012-0/+19
| | | | | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TL-MR3420 v1 boardjuhosg2010-09-273-1/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for Atheros AP96 reference boardnbd2010-09-273-0/+22
| | | | | | | | | | | | This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg2010-09-035-0/+70
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 03:02:50 +0000