| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27827 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27823 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
eapol frame
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27822 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
swconfig fails to load uci configuration after the generic switch
identifier changes.
root@OpenWrt:/# uci show network | grep switch
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0t 2 3 4 5
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=eth0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=0t 1
root@OpenWrt:/# swconfig dev eth0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
root@OpenWrt:/# swconfig dev switch0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27820 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27819 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27818 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
| |
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
nor STOP is defined
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27797 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
icmp types are given in a rule block for both icmp and other protocols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27792 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
and also fix tx power limits with ATH_USER_REGD set
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27788 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27783 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27779 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
deleted init scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27776 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27769 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
and it was reported to cause connection stability issues (see #9646)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27764 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27757 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27753 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27752 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
| |
BCMA bus
- refresh and reorder patches
- introduce a unified BCMA/SSB glue driver to accomodate for both bus types on brcm47xx
- extend wlunbind init script to detach device from bcma-pci-bridge as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27751 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27750 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27735 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
| |
This makes b43 work on broadcom SoCs using bcma as system bus.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27734 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27732 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a user invoked /sbin/ifup to bring up an interface, the setup used to fail
in case of wireless networks tied to a non-bridged interface definition.
Likewise, the bringup of "lan" in the default configuration will reinitialize
the bridge but do not re-join the wireless network to it, requiring an extra
call to /sbin/wifi (which might not be possible anymore due to a severed link
if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27720 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27711 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
symlink
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27699 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27698 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27689 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
others) contain bogus data, which breaks wifi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27688 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
cleanups (#7827)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27686 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27681 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27680 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27671 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
host routes (#4876)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27669 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27666 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
fix arv752DPW and add arv7525PW
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27664 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27663 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
| |
Allow for each lantiq target (without wifi eeprom) to define where
wireless configuration data is on flash. Patch also adds support for
sx763 lantiq target.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27662 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
| |
Add menu options to ltq-dsl-app.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27661 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
|
|
|
|
|
|
| |
sysctls to uci.
- option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz
- option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz
This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan.
Fixes ticket #8699.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27653 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27652 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
options to control the generated radvd prefix values (#9147)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27650 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27648 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
ip6tables-utils (#9691)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27646 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
CPU load when idle (#7293)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27635 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
| |
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27630 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
after server restart from within LuCI and similar problems
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27628 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
where applicable and properly handle duplicates in add and del state helpers (#9152, #9710)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27618 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
of state vars (#9711)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27616 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
|
|
|
|
| |
calls uci_revert_state() before uci_set_state()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27614 3c298f89-4303-0410-b956-a3cf2f4a3e73
|