summaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* dnsmasq: Set prefix on-link bit in RAsblogic2012-08-222-1/+43
| | | | | | | | This is fix an issue with dnsmasq's RA that does not set the "on-link" bit, making all local IPv6 traffic go to the router then to the destination host, not directly to each other. patch is from dnsmasq git git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33216 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] comgt: handle service mode for Huawai modems (#12039)jow2012-08-192-2/+9
| | | | | | | | | | | | | It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in this wiki or this blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s /etc/gcom/getcardinfo.gcom is scanned for huawei). Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases. However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33212 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] acx-mac80211: depend on mipsel, not mips since AR7 is low endianjow2012-08-161-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33201 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iwinfo: add hwinfo for Rt3052jow2012-08-151-0/+1
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33200 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iwinfo: add hw info support for Rt3xxx SoCsjow2012-08-152-1/+24
| | | | | | | | | | | This takes the device_id and subsystem_id from the EEPROM, I'll add the info for other Rt3xxx chips in the next days. [jow: minor whitespace changes] Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33199 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: add back a patch for fixing eeprom rate power parsingnbd2012-08-151-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33198 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package/om-watchdog: start service only on the om2p/om2p-lc boards on ar71xxjuhosg2012-08-151-5/+5
| | | | | | | If the package is installed, it starts the watchdog daemon on every ar71xx based board. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33194 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iwinfo: add some Atheros cardsjow2012-08-141-0/+2
| | | | | | | | | These are two Atheros modules we are using, just for the cosmetics to make them show up with the proper names in LuCI. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33186 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] iwinfo: transparently handle radioX names in madwifi backendjow2012-08-141-5/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33180 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [arptables] fix breakage when compiling for armv6blogic2012-08-141-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33179 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: uci-defaults for rssiledsjuhosg2012-08-131-0/+44
| | | | | | | | Adds capability to add uci-defaults defining RSSI LEDs Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33164 3c298f89-4303-0410-b956-a3cf2f4a3e73
* new package: rssileds daemonjuhosg2012-08-133-0/+402
| | | | | | | | | | | | | | | | | rssileds is a small user-space process to control LEDs by polling the signal quality reported by a WiFi interface. By using the iwinfo library, rssileds is independent of the WiFi driver used. It supports pwm controlled LEDs and may by used to nicely fade through all colors in real-time of the rainbow while only wasting very little CPU time and a small constant amount of system memory. An example configuration for the ALL0258N will follow in the next patch. This is a slightly improved version of rssileds, now quality values are in percent and stuff is written to syslog. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33163 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [pjsip] dependencies break when alsa is stagedblogic2012-08-131-10/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33162 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] unify tapi depsblogic2012-08-135-6/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33160 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] busybox: enable fsync applet by defaultflorian2012-08-132-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33159 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [acx-mac80211] 3rd time lucky ... too much sun todayblogic2012-08-121-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33152 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [acx-mac80211] unbreak depsblogic2012-08-121-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33151 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [acx-mac80211] breaks when building for powerpcblogic2012-08-121-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33150 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: provide a sysupgrade -r (--restore-backup) option as ↵jow2012-08-122-1/+13
| | | | | | convenience wrapper for tar -C / -x(v)zf git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] netifd: bump to git head, userspace routes are installed with ↵jow2012-08-111-2/+2
| | | | | | RTPROT_STATIC from now on git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33132 3c298f89-4303-0410-b956-a3cf2f4a3e73
* 6rd: missing config option `ipaddr`.jow2012-08-111-0/+1
| | | | | | | | This option is necessary when configuring 6rd behind NAT. Signed-off-by: Stéphan Kochen <stephan@kochen.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33123 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [buildroot] move LIB_SUFFIX from base-files to rules.mkflorian2012-08-101-3/+0
| | | | | | Some packages are going to need fixups based on LIB_SUFFIX git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33080 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] netifd: call "wifi down" before "wifi up"jow2012-08-091-0/+2
| | | | | | | | | | | | When the underlying /etc/config/wireless got changed since the last "wifi up" has been performed, the uci vap ifname state vars become inconsistent on a subsequent "wifi up" and multiple vaps get mapped to the same ifnames which confuses the gui and other processes relying on them. For now call an explicit "wifi down" prior to each "wifi up" which will clear up the state accordingly. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: fix option parsing of -F/--force parameterjow2012-08-092-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package: linux-atm: br2684ct: fix nas interface bringup on bootjogo2012-08-092-2/+10
| | | | | | | | | | | Give nas interface time to setup them selves before configuring them. Should fix #11826. Contributed by T-Labs, Deutsche Telekom Innovation Laboratories Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix handling of decryption errors, should improve link stabilitynbd2012-08-081-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: revert a buggy tx power related patchnbd2012-08-081-20/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33062 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: check for ldd presence and executability (#11991)florian2012-08-082-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix hang issues on hw reset caused by interrupt stormsnbd2012-08-081-0/+61
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] hostapd: fix ap/sta regression which got accidentally introduced ↵jow2012-08-082-1/+3
| | | | | | by r32829 (#11914) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] busybox: support V=c toplevel verboseness flag (#11799)florian2012-08-071-0/+9
| | | | | | Signed-off-by: Gregory M. Turner <gmt@malth.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33035 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] w1-gpio-custom: set enable_external_pullup to null (#8952)florian2012-08-072-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33034 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: completely disable the MIB interrupt from the interrupt mask register ↵nbd2012-08-071-0/+12
| | | | | | to prevent potential interrupt storms git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33032 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: extend and enable PA predistortionnbd2012-08-063-0/+190
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33031 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: do not delete linux/*_platform.h, they are touched by patches. ↵nbd2012-08-061-3/+6
| | | | | | instead make the build fail if they differ from the ones in the kernel tree to prevent subtle runtime issues (see #11981) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33030 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fixes tapi dependenciesblogic2012-08-064-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33029 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [e2fsprogs] fixes package descriptionblogic2012-08-061-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33028 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: add various pending tx power fixes, vastly improves stability and ↵nbd2012-08-063-93/+142
| | | | | | performance with various cards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33014 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] mac80211: remove header files used to share struct with platform ↵hauke2012-08-051-0/+6
| | | | | | | | | | | | code. The structs defined in these header files should be the same as the structes used by the platform code otherwise it will cause strange runtime errors. By removing them from compat-wireless we will get a compile error instead of a runtime error if they are out of sync. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33006 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] switch: clean up robo switch driverhauke2012-08-051-98/+42
| | | | | | | | | | | * remove use_et, all supported drivers are using mii ioctls * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR. * remove support for old kernel versions * do_ioctl is allways called with buff == NULL * use if_mii git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix xen pci module, partially fixes #11970blogic2012-08-051-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32996 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: use libgpio instaed of implementing the gpio interface ourself.hauke2012-08-045-266/+98
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] gspca-sn9c20x.ko was not insmod'ed due to typoblogic2012-08-041-1/+1
| | | | | | fixes #11973 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] wrt55agv2-spidevs needs <linux/modules.h>blogic2012-08-031-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uclibc++: update to 0.2.4florian2012-08-017-205/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32929 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)florian2012-08-011-7/+7
| | | | | | | Since we are overriding TARGET_CXX with the g++-uc wrapper when we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32928 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] partially revert r32855florian2012-07-291-0/+114
| | | | | | | Too many modules were removed, while only the octeon module was meant to be removed, fix that. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32909 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [acx-mac80211] dont build on arm as kernel headers are missing/have a ↵blogic2012-07-291-1/+1
| | | | | | different layout git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] clean up pwm patches and driversblogic2012-07-284-277/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: fix detection of standalone lddflorian2012-07-272-2/+2
| | | | | | | | When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 13:46:45 +0000