summaryrefslogtreecommitdiffstats
path: root/package/mac80211/files
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: add mesh_param supportnbd2013-05-151-0/+14
| | | | | | | | | | | | | | This patch add mesh_param support in mac80211.sh It suppose that this patch http://patchwork.openwrt.org/patch/3540/ is applied (add HT support for mesh) Tested with rspro(ar9280)/wr1043nd, BB r36211 see also this http://lists.open80211s.org/pipermail/devel/2012-June/003352.html (mesh_hwmp_rootmode 1 & mesh_gate_announcements 1 => mesh_hwmp_rootmode 4 & mesh_gate_announcements 1) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add HT support for meshnbd2013-05-151-1/+6
| | | | | | | | | | | | This is a quick patch to enable HT for mesh mode https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput http://lists.open80211s.org/pipermail/devel/2012-March/002990.html For my test setup the speed increased from 1-2 Mbytes/sec to 8-10 Mbytes/sec (iperf) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: use the original mac address for the first virtual interfacenbd2013-04-231-1/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36408 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: rework mac address allocationnbd2013-04-171-10/+24
| | | | | | | | | | | | | | | | | | | If the first byte is available in the address mask, use only that one - set the local bit and xor it with the id << 2. This ensures that there are no hardware BSSID & BSSID-mask conflicts with devices that have almost the same MAC address with just a small offset. The MAC address conflict has been observed in a deployment with some devices from the same batch when running with multiple interfaces. If only some bits of the last byte are available, xor the id onto the last MAC address byte (relevant mostly for Ralink devices). In other cases (should not happen at this point), use the previous MAC address offset calculation but without the local bit. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mac80211] fixes mbssid on ralink hardwareblogic2013-03-121-2/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35986 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211/hostapd: short_preamble is a per-vif option and should be enabled ↵nbd2013-02-111-3/+0
| | | | | | by default git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: apply network interface configuration for adhoc + wpa2nbd2013-01-071-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35049 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211, hostapd: Fix macfilter for multi bssid setupsnbd2012-12-041-20/+0
| | | | | | | | | | | Previously only the first macfilter configuration would have been used on all interfaces. However, the configuration was always done per vif already. Hence, move the macfilter setup into hostapd.sh where and create one mac list file per vif. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix typo that broke specifying the phy name directly (deprecated)nbd2012-10-181-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33853 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: store the device path as identifier in the config instead of the ↵nbd2012-10-181-10/+38
| | | | | | mac address, makes it more robust against card replacement or user errors git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33834 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: add b43-toolshauke2012-10-082-138/+0
| | | | | | | Move the b43-tools build from the mac80211 Makefile into an own package in tools and use the newest version of b43-tools. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33668 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add uci support for configuring antenna gainnbd2012-09-281-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33587 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] mac80211: fiy typo in b43-fwsquash.pyhauke2012-09-231-2/+2
| | | | | | | Thanks Jonas git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] mac80211: fix b43 firmware squash for HT and LCN firmware, one ↵hauke2012-09-221-2/+6
| | | | | | file was missing for both. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211/hostapd: add support for HT capa in case of IBSS/RSNblogic2012-07-241-7/+7
| | | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32830 3c298f89-4303-0410-b956-a3cf2f4a3e73
* wpa_supplicant: add more parametersblogic2012-07-241-1/+2
| | | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32829 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: make channel bandwidth setting genericthepeople2012-07-041-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: remove the passive-scan/no-ibss flag of channels 36-48 in the ↵nbd2012-06-081-1/+1
| | | | | | world regd similar to the default regd in ath git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32126 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: use built-in regulatory database instead of crda to avoid various ↵nbd2012-05-281-0/+697
| | | | | | race conditions git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: get rid of duplicate iw reg set command (thx, stintel)nbd2012-05-261-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31859 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: allow NOHT for IBSS modejow2012-03-291-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31137 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add hostapd socket option to wpa_supplicant for IBSS RSN as wellnbd2012-03-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: modify mac80211.sh to in order to support IBSS-RSNnbd2012-03-271-0/+11
| | | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: Allow preamble configurationblogic2012-02-141-0/+3
| | | | | | | | | | | | | | Add a new wireless config parameter short_preamble=0|1 to enable usage of short preambles. Default is to only allow long preambles as before. Even if short_preamble is set to 1 hostapd will take care that short preambles are disabled as soon as a STA associates that cannot handle short preambles. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: clean up init, remove some redundant checks, fix tx power init ↵nbd2011-12-231-77/+73
| | | | | | (#10113) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29606 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix powersave settingnbd2011-12-191-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: apply txpower after bringing up the interface, should fix #10113nbd2011-12-181-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: use iw instead of iwconfig to disable powersavenbd2011-12-181-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add support for firmware 666.2 for b43 deviceshauke2011-12-081-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29485 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: change wireless ifname numbering schemajow2011-11-061-6/+3
| | | | | | | | | | Instead of simply counting up until we hit a free iface, group ifnames by wiphy so that the first wlanX on a phy gets the phy number and following ifaces an index-suffix, e.g. wlan0 for network 1 on phy 1 and wlan0-1 for network 2 on phy 1. This fixes state var confusion when operating multiple radios and allows to reliably take down and restart one radio only, even if the number of networks changes in between. This should, along with other changes in LuCI, fix #10335. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28784 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: set the country code early to allow crda to settlenbd2011-10-081-0/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28387 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: rework mac address generation for virtual interfaces; ↵jow2011-09-251-9/+17
| | | | | | set locally administered bit on generated macs and change the last two bytes isntead of the first one git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28298 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: introduce "disabled" option for wifi-iface section to ↵jow2011-09-081-1/+4
| | | | | | shutdown single networks on a radio git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28198 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: configure hostapd logging optionsjow2011-08-201-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28057 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: use first available channel from current phy if channel ↵jow2011-08-131-1/+7
| | | | | | is set to "auto" git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27976 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: always store broadcom firmware in b43 and b43legacy dirhauke2011-08-061-0/+16
| | | | | | | | | This is always used to build a firmware for linux systems also if we are on freebsd. This is one patch from #9897 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27926 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: add a temporary uci option for setting the channel bandwidthnbd2011-07-081-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27563 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: configure HT IBSS through ucinbd2011-06-241-1/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: broadcast the country IE by default if the country code is ↵nbd2011-04-261-0/+5
| | | | | | configured (#9308) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26765 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: b43: Add Firmware 5.10.56.27hauke2011-04-191-0/+3
| | | | | | | | | | | | | | Add the 5.10.56.27 firmware option. This includes updating b43-fwcutter to its newest release 14 and updating the b43-fwsquash.py to recognise rev 16 n phy files. Also rename the current options from STABLE/EXPERIMENTAL to their version numbers. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26733 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: Fix unique device autodetectionacinonyx2011-03-151-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: allow AP configuration of beacon interval, DTIM period, maximum ↵nbd2011-03-021-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | permissible STA listen interval, and basic rates This introduces beacon_int and basic_rate (per wifi-device), and dtim_period and max_listen_int (per wifi-iface) for mac80211. These configure the beacon interval, basic rate specification, DTIM period (one DTIM per this many beacon frames), and maximum listen interval that a STA will be permitted to associate with. All of the new settings are optional; if they're absent, the existing hostapd (or, in the case of basic_rate, driver) defaults will be used. The existing bintval property only used for type adhoc is moved from wifi-iface to wifi-device, and is renamed to beacon_interval because bintval isn't a great name. The beacon interval is property of the wifi-device; while the choice between wifi-device and wifi-iface may not be relevant with an adhoc network, there's no reason to configure the same property one way for type adhoc and another for type ap. This change isn't expected to cause many problems, as bintval was added recently, in r25111. Similarly, the list of basic rates, also added for type adhoc in r25111, is a property of the device and not the interface. Further, it ought to be represented in UCI as a list, not a string dependent on the format that iw uses. I’ve moved it onto the device, renamed it to basic_rate, and made it configurable for APs via hostapd. Finally, I adapted it to use the same kb/s representation as mcast_rate; there's precedent for this format in that it's also how madwifi interprets mcast_rate. Neither bintval nor basicrates were ever documented in the UCI wireless configuration page on the wiki. When this change is committed, I'll update the documentation as needed. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ignore errors in the command to set the rx/tx antenna - many ↵nbd2011-01-281-1/+1
| | | | | | drivers do not support this yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25192 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: fix order of iw parameters, fix broken antenna config calljow2011-01-271-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25152 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: Fix antenna setting when only one of {rx,tx}antenna ↵acinonyx2011-01-271-4/+3
| | | | | | options is specified git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25136 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: add missing done to mac80211.sh (#8735)jow2011-01-261-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: add mising esac to mac80211.shjow2011-01-261-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25122 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: rework recent mac80211.sh additions:jow2011-01-261-7/+32
| | | | | | | | | - split antenna options into rxantenna and txantenna to bring it in line with broadcom and madwifi - get rid of temporary variables - follow the documented config protocol for wep keys (option key # + option key# [s:]data) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25116 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: Add new parameters to mac80211.shnbd2011-01-261-1/+10
| | | | | | | | | | | | Add new options 'bintval' (beacon interval), 'basicrates' (basic rates) and 'antenna' (antenna selection) for /etc/config/wireless to be used with mac80211 drivers. Enable WEP encryption for IBSS mode. Patch from: kentarou matsuyama <matsuyama@thinktube.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25111 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: Add mac address filter configuration for hostapdnbd2011-01-261-1/+22
| | | | | | | | | Add support of mac address filter. Now 'macfilter' and 'maclist' options can be used with mac80211. Patch from: kentarou matsuyama <matsuyama@thinktube.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25105 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 00:11:41 +0000