summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* 6relayd: Fix possible memory corruption issuecyrus2013-02-191-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35673 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.8-rcX to 3.8juhosg2013-02-1910-11/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35672 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: b43: Increase number of RX DMA slotshauke2013-02-181-0/+11
| | | | | | | | | | | | | | | Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35671 3c298f89-4303-0410-b956-a3cf2f4a3e73
* 6relayd: Workaround potential signal handling issuecyrus2013-02-181-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/rdc: migrate to common led helper functionsflorian2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rb532: migrate platform to common led helper functionsflorian2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cobalt: migrate platform to common led helper functionsflorian2013-02-181-15/+12
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: migrate platform to common led helper functionsflorian2013-02-181-49/+2
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35661 3c298f89-4303-0410-b956-a3cf2f4a3e73
* au1000: migrate to common led helper functionsflorian2013-02-181-15/+11
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35660 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar7: migrate to common led helper functionsflorian2013-02-181-33/+27
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35659 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: migrate to common led helper functionsjuhosg2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns21xx: migrate to common led helper functionsjuhosg2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: migrate to common led helper functionsjuhosg2013-02-181-29/+5
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* adm5120: migrate to common led helper functionsjuhosg2013-02-181-32/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35649 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: introduce commonly used helper functions for setting ledsjuhosg2013-02-182-1/+69
| | | | | | | | | | | | | | | | | | Currently, most platforms define such helpers in their own diag.sh implementation with almost identical code. By factoring out the common ground it's possible to simplify maintainability and homogenize the haptics over multiple platforms (so far as is reasonably practicable, in a next step). [juhosg: - fix led_set_attr parameters in led_timer - add led_morse and status_led_set_morse helpers - add status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: minor cosmetic corrections for functions.shjuhosg2013-02-171-6/+3
| | | | | | | | | | | | | - update copyright header - remove superfluous shebang left-over from changeset 34794 - unify function declaration [juhosg: keep Vertical Communications' copyright notice] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add xz compressed packages to known extensions of dl_cleanupjuhosg2013-02-171-1/+5
| | | | | | | | | Add .tar.xz, .txz, and .orig.tar.xz as known extensions to dl_cleanup.py. Signed-off-by: Ian Leonard <antonlacon@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.7 to 3.7.9juhosg2013-02-1716-17/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firewall3 - a C implementation of the current firewall scriptsjow2013-02-173-0/+70
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: cleanup function/variable namesjuhosg2013-02-171-110/+110
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35642 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: rename struct ar8216_priv to ar8xxx_privjuhosg2013-02-171-94/+94
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35641 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the Mikrotik RB951G boardjuhosg2013-02-172-0/+4
| | | | | | | | | | [juhosg: change rb-951g to rb-951g-2hnd in the scripts] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35634 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the Mikrotik RB951G boardjuhosg2013-02-173-0/+264
| | | | | | | | | | | | | | | | | This is platform definition for the RB951G device. It's mostly rework of RB2011UAS patchset with network taken from the RB751 patches. The main difference is the flash layout used by this device. [juhosg: - remove dead code from mach-rb951g - add "-2HnD" suffix to the machine name - use a separate 615-MIPS-ath79-RB951G-support.patch] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35633 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add initial support for kernel 3.8hauke2013-02-1656-0/+8809
| | | | | | | | | | | | | This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: fix the scan wait patch for multiple interfacesnbd2013-02-161-21/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35630 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix kmod-usb2 package namejuhosg2013-02-161-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix kmod-usb2 package namejuhosg2013-02-161-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35628 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package/kernel: add package for the Freescale On-Chip EHCI Controllerjuhosg2013-02-161-2/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: add input drivers to default packages, and load those during preinitjuhosg2013-02-162-1/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35626 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch moduleshauke2013-02-161-1/+1
| | | | | | | | | | | Adjust the "AutoLoad" number for the BGMAC module to be prior to the switch modules. This probably isn't real important as the modules are loaded in the correct order by preinit anyway. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: improve cpuport detection for filesafehauke2013-02-161-13/+9
| | | | | | | | | Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X Ask the switch driver where the CPU port is. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix network config on simpleshare hauke2013-02-161-0/+6
| | | | | | | | | | | The included patch will generate a correct network configuration on the simpletech simpleshare. Thank you for the patch Will Holmes (RealOpty) This closes #12361. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35623 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: handle return values of cfe_env_get() correctly.hauke2013-02-161-4/+5
| | | | | | | This closes #12746. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: bgmac: fix unaligned accesses to network headers.hauke2013-02-161-8/+60
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: add back the patch that waits for interface bringup in ht40, it got ↵nbd2013-02-161-0/+73
| | | | | | lost with the update git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix unaligned access to mac addresshauke2013-02-161-0/+18
| | | | | | | | | | The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. This closes #9824. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35618 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: try to automatically detect if the wan port is at port 4 and not ↵hauke2013-02-161-1/+12
| | | | | | | | | at port 0. This should fix #13000. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* update x86 generic to kernel v3.7juhosg2013-02-162-0/+206
| | | | | | | Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35616 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use the new macaddr_* helpers instead of maccalcjuhosg2013-02-163-19/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35615 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: add macaddr_{add,2bin,setbit_la} helpersjuhosg2013-02-162-1/+25
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35614 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use the mtd_get_mac_* helpersjuhosg2013-02-163-66/+30
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35613 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: add mtd_get_mac_{ascii,binary} helpersjuhosg2013-02-162-1/+35
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35612 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionsjogo2013-02-164-0/+4
| | | | | | | | | r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to not build with PTP enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35611 3c298f89-4303-0410-b956-a3cf2f4a3e73
* samba36: fix segmentation fault when trying to add non-existent usersjogo2013-02-162-2/+2
| | | | | | | | Based on a patch from НКВД. Closes #12962. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35610 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hotplug2: depend on libbsd only when targetting eglibcflorian2013-02-151-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35608 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libevent2: do not add librt dependency when targetting eglibcflorian2013-02-151-1/+0
| | | | | | | | This is already taken care of by PKG_DEFAULT_DEPENDS Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35607 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libbsd: make it available for eglibc onlyflorian2013-02-151-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35606 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: make nvram checksum failures non fataljogo2013-02-1540-152/+188
| | | | | | | | fixes #12982. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35605 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.7 to 3.7.8juhosg2013-02-1519-23/+23
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35604 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: move PHY4 RGMII workaround code out of the loopjuhosg2013-02-141-11/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35603 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 15:07:09 +0000