rtl819xx - Realtek rtl819xx port to OpenWrt

	Commit message (Expand)	Author	Age	Files	Lines
*	dropbear: use network_get_device instead of scan_interfaces to get the device...	nbd	2012-12-22	1	-3/+4
*	generic: ar8216: don't use 0 as default VID on AR8327	juhosg	2012-12-22	1	-1/+3
*	generic: more missing symbols for 3.{6,7}	juhosg	2012-12-22	2	-0/+4
*	ramips: unify eeprom file name for the built-in wireless MAC	juhosg	2012-12-22	4	-6/+5
*	ramips: rt3883: fix build error	juhosg	2012-12-22	1	-1/+1
*	ipv6-support: Preliminary support for dnsmasq >=2.66	cyrus	2012-12-22	2	-5/+29
*	6relayd: Fix detection of prefix changes	cyrus	2012-12-22	1	-2/+2
*	odhcp6c: Fix build on arch where char is unsigned	cyrus	2012-12-22	1	-2/+2
*	6distributed: Improve prefix deprecation algorithm	cyrus	2012-12-22	1	-2/+2
*	ar71xx: register the second ethernet interface on the AP136	juhosg	2012-12-22	2	-5/+27
*	ar71xx: fix ethernet device registration for QCA9558	juhosg	2012-12-22	2	-5/+85
*	ar71xx: rename QCA9558 ETH_CFG bit defines	juhosg	2012-12-22	2	-4/+4
*	ar71xx: fixup allowed PHY interface types for QCA9558	juhosg	2012-12-22	1	-2/+23
*	ar71xx: don't assign any MII bus device on QCA9558 by default	juhosg	2012-12-22	1	-1/+4
*	ar71xx: ag71xx: fix mii_bus_dev sanity check	juhosg	2012-12-22	1	-1/+1
*	ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev	juhosg	2012-12-22	1	-2/+2
*	generic: ar8316: allow to configure port 6 via platform data on AR8327	juhosg	2012-12-22	2	-17/+19
*	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data	juhosg	2012-12-22	10	-10/+10
*	ramips: add support for 3.7	juhosg	2012-12-22	14	-0/+785
*	package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols	juhosg	2012-12-22	1	-2/+0
*	ramips: convert to use {e,o}hci-platform driver	juhosg	2012-12-22	8	-525/+98
*	generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers	juhosg	2012-12-22	4	-0/+305
*	[netfilter] fix ipv4 nat on 3.7 by adding missing iptables modules	blogic	2012-12-22	1	-1/+1
*	[lantiq] ar9 did not load atm driver properly	blogic	2012-12-22	1	-1/+1
*	[lantiq] dont use input layer for gpio buttons	blogic	2012-12-21	1	-1/+1
*	[lantiq] default switch setup for WBMR	blogic	2012-12-21	1	-0/+6
*	[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii s...	blogic	2012-12-21	2	-0/+98
*	[lantiq] adds script to set wps info on boards with a wps button	blogic	2012-12-21	1	-0/+16
*	[lantiq] minor tweaks to WBMR image	blogic	2012-12-21	2	-3/+3
*	[gpio-button-hotplug] add OF binding	blogic	2012-12-21	1	-3/+117
*	[lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys	blogic	2012-12-21	1	-1/+1
*	[lantiq] fix typo inside fritz3370 devicetree file	blogic	2012-12-21	1	-1/+1
*	[lantiq] more devicetree fixes	blogic	2012-12-21	7	-6/+341
*	[lantiq] improve button handling	blogic	2012-12-21	1	-11/+39
*	[lantiq] add phy-reset gpio handling to xrx200-net	blogic	2012-12-21	1	-24/+31
*	[lantiq] add more lantiq phy ids based on daniels uboot code	blogic	2012-12-21	1	-42/+80
*	[lantiq] refresh patch and install v1.1 gphy blobs	blogic	2012-12-21	1	-1859/+14
*	[lantiq] adsl firmware in wrong submenu	blogic	2012-12-21	1	-0/+1
*	[lantiq] minor cleanup for adsl firmware handling	blogic	2012-12-21	1	-12/+8
*	[lantiq] properly symlink the adsl firmware	blogic	2012-12-21	1	-1/+1
*	[kernel] make to rtl8366_smi of binding use gpio_is_valid	blogic	2012-12-21	1	-1/+1
*	[package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supiv...	mirko	2012-12-21	1	-2/+2
*	kernel: add solos-pci update for 3.3	juhosg	2012-12-21	1	-16/+425
*	rb532: add support for 3.7	juhosg	2012-12-20	3	-0/+215
*	ramips: Add USB support for DAP-1350 platform.	juhosg	2012-12-20	1	-0/+1
*	rb532: nuke 3.3 support	juhosg	2012-12-20	3	-196/+0
*	rb532: switch to 3.6.11	juhosg	2012-12-20	1	-1/+1
*	rb532: add support for 3.6	juhosg	2012-12-20	3	-0/+206
*	ppc44x: add support for 3.7	juhosg	2012-12-20	3	-0/+302
*	kernel: add solos-pci patches from 3.8 for new hardware	juhosg	2012-12-20	2	-32/+800