summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* package: linux-atm: br2684ct: fix nas interface bringup on bootjogo2012-08-092-2/+10
| | | | | | | | | | | Give nas interface time to setup them selves before configuring them. Should fix #11826. Contributed by T-Labs, Deutsche Telekom Innovation Laboratories Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Fix hard reset of alix/soekris hardware under heavy NIC loadjow2012-08-091-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch corrects a hard reset that occurs on alix and soekris net5501 hardware. Specifically, this is an issue with the via rhine NIC driver. Under periods of extreme load, the via rhine driver can cause a reset of the entire system. When this happens no output is seen on the console, the device simply reboots. This was reported in the following ticket: Consistent crash on Soekris NET5501 https://dev.openwrt.org/ticket/11882 I was able to reproduce the problem locally with numerous alix 2d13 platforms. Under heavy 64 byte frame size load from a Smartbits traffic generator, the alix hardware will hard reset in under 5 minutes. The same hardware, under the same load, on FreeBSD 9.0 does not reset. The patch below backports most of the via rhine changes from kernel 3.5. With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring these changes in to avoid this serious issue. I've tested this heavily in my test environment and was able to keep the device stable under load for extended periods of time without any resets. Also, a nice side effect of this change is that it significantly raises the performance the platform. Without this patch the alix 2d13 can move approximately 29,000 packets per second at 64 byte frame sizes. After this patch the alix can move 52,000 packets per second at 64 byte frame sizes. I put this patch under the x86 patches as those are the only platforms with via rhine hardware that I'm aware of. If it needs to go some place else please let me know. Thanks, Adam Signed-off-by: Adam Gensler <openwrt@kristenandadam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: use dma_mapping_error() instead of checking pointersflorian2012-08-091-2/+2
| | | | | | Thanks Gabor for spotting this git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: rework PHY interrupt configuration to avoid racesflorian2012-08-081-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33070 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: close possible race condition during startflorian2012-08-081-1/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: unmap the DMA buffer when closing deviceflorian2012-08-081-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33068 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: check dma_map_single address return valuesflorian2012-08-081-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33067 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] build a Devolo dLAN USB Extender specific imageflorian2012-08-081-1/+8
| | | | | | | The kernel has to be rounded up to the nearest 1MB, then we append the root filesystem at its end. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33066 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] cleanup image generationflorian2012-08-081-4/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33065 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix handling of decryption errors, should improve link stabilitynbd2012-08-081-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: revert a buggy tx power related patchnbd2012-08-081-20/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33062 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: check for ldd presence and executability (#11991)florian2012-08-082-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix hang issues on hw reset caused by interrupt stormsnbd2012-08-081-0/+61
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] pci gpio mappingblogic2012-08-081-4/+4
| | | | | | | | This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] hostapd: fix ap/sta regression which got accidentally introduced ↵jow2012-08-082-1/+3
| | | | | | by r32829 (#11914) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] busybox: support V=c toplevel verboseness flag (#11799)florian2012-08-071-0/+9
| | | | | | Signed-off-by: Gregory M. Turner <gmt@malth.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33035 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] w1-gpio-custom: set enable_external_pullup to null (#8952)florian2012-08-072-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33034 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: completely disable the MIB interrupt from the interrupt mask register ↵nbd2012-08-071-0/+12
| | | | | | to prevent potential interrupt storms git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33032 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: extend and enable PA predistortionnbd2012-08-063-0/+190
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33031 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: do not delete linux/*_platform.h, they are touched by patches. ↵nbd2012-08-061-3/+6
| | | | | | instead make the build fail if they differ from the ones in the kernel tree to prevent subtle runtime issues (see #11981) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33030 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fixes tapi dependenciesblogic2012-08-064-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33029 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [e2fsprogs] fixes package descriptionblogic2012-08-061-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33028 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: add various pending tx power fixes, vastly improves stability and ↵nbd2012-08-063-93/+142
| | | | | | performance with various cards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33014 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] mac80211: remove header files used to share struct with platform ↵hauke2012-08-051-0/+6
| | | | | | | | | | | | code. The structs defined in these header files should be the same as the structes used by the platform code otherwise it will cause strange runtime errors. By removing them from compat-wireless we will get a compile error instead of a runtime error if they are out of sync. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33006 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix USB base registers and IRQs for BCM6328jogo2012-08-0510-12/+100
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33005 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx] update tg3 driverhauke2012-08-051-75/+128
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33004 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx] generate image for Linksys e3200hauke2012-08-051-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33003 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] switch: clean up robo switch driverhauke2012-08-051-98/+42
| | | | | | | | | | | * remove use_et, all supported drivers are using mii ioctls * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR. * remove support for old kernel versions * do_ioctl is allways called with buff == NULL * use if_mii git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update gpio patchhauke2012-08-052-10/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix patch which moves the flash struct in wgt634u codehauke2012-08-052-12/+29
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33000 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix xen pci module, partially fixes #11970blogic2012-08-051-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32996 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] W502V/ARV4525 wireless mac bugfixblogic2012-08-041-4/+1
| | | | | | | | | The ARV4525 board init is passing the wrong offset to arv_register_ath5k() resulting in a bogus mac. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32993 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: use libgpio instaed of implementing the gpio interface ourself.hauke2012-08-0413-377/+810
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] gspca-sn9c20x.ko was not insmod'ed due to typoblogic2012-08-041-1/+1
| | | | | | fixes #11973 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] wrt55agv2-spidevs needs <linux/modules.h>blogic2012-08-031-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] cleanup patchesblogic2012-08-03209-82080/+146978
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] nuport-mac: properly protect the phy interrupt handlerflorian2012-08-021-2/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [bufferbloat] Codel: avoid a nul rec_inv_sqrtblogic2012-08-021-0/+68
| | | | | | | | | | | | | | | One condition before codel_Newton_step() was not good if we never left the dropping state for a flow. As a result rec_inv_sqrt was 0, instead of the ~0 initial value. codel control law was then set to a very aggressive mode, dropping many packets before reaching 'target' and recovering from this problem. Brought over from 3.5-stable Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32950 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] fixes i2c clock enableblogic2012-08-021-0/+32
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: simplify misc IRQ handlingjuhosg2012-08-021-0/+66
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix AR934X_EHCI_SIZEjuhosg2012-08-024-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043NDjuhosg2012-08-022-0/+745
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: allow to use board specific code in the lzma-loaderjuhosg2012-08-023-3/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: init switch hw_reset on the TL-WR1043ND boardjuhosg2012-08-021-2/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rtl836x: add hw_reset field to struct rtl8366_smijuhosg2012-08-027-2/+35
| | | | | | | It will be used to start/stop the switch if that is supported by the given board. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free callsjuhosg2012-08-021-2/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add missing netmask to the network configflorian2012-08-011-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] assume the link is up and full-duplex by defaultflorian2012-08-011-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add a default and suitable network config fileflorian2012-08-011-0/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ew-dorin: added router firmware generationjuhosg2012-08-016-5/+49
| | | | | | | | [juhosg: remove dead code] Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73