summaryrefslogtreecommitdiffstats
Commit message (Expand)AuthorAgeFilesLines
* dropbear: use network_get_device instead of scan_interfaces to get the device...nbd2012-12-221-3/+4
* generic: ar8216: don't use 0 as default VID on AR8327juhosg2012-12-221-1/+3
* generic: more missing symbols for 3.{6,7}juhosg2012-12-222-0/+4
* ramips: unify eeprom file name for the built-in wireless MACjuhosg2012-12-224-6/+5
* ramips: rt3883: fix build errorjuhosg2012-12-221-1/+1
* ipv6-support: Preliminary support for dnsmasq >=2.66cyrus2012-12-222-5/+29
* 6relayd: Fix detection of prefix changescyrus2012-12-221-2/+2
* odhcp6c: Fix build on arch where char is unsignedcyrus2012-12-221-2/+2
* 6distributed: Improve prefix deprecation algorithmcyrus2012-12-221-2/+2
* ar71xx: register the second ethernet interface on the AP136juhosg2012-12-222-5/+27
* ar71xx: fix ethernet device registration for QCA9558juhosg2012-12-222-5/+85
* ar71xx: rename QCA9558 ETH_CFG bit definesjuhosg2012-12-222-4/+4
* ar71xx: fixup allowed PHY interface types for QCA9558juhosg2012-12-221-2/+23
* ar71xx: don't assign any MII bus device on QCA9558 by defaultjuhosg2012-12-221-1/+4
* ar71xx: ag71xx: fix mii_bus_dev sanity checkjuhosg2012-12-221-1/+1
* ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_devjuhosg2012-12-221-2/+2
* generic: ar8316: allow to configure port 6 via platform data on AR8327juhosg2012-12-222-17/+19
* generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_datajuhosg2012-12-2210-10/+10
* ramips: add support for 3.7juhosg2012-12-2214-0/+785
* package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbolsjuhosg2012-12-221-2/+0
* ramips: convert to use {e,o}hci-platform driverjuhosg2012-12-228-525/+98
* generic/3.6: add platform specific power callbacks to {e,o}hci_platform driversjuhosg2012-12-224-0/+305
* [netfilter] fix ipv4 nat on 3.7 by adding missing iptables modulesblogic2012-12-221-1/+1
* [lantiq] ar9 did not load atm driver properlyblogic2012-12-221-1/+1
* [lantiq] dont use input layer for gpio buttonsblogic2012-12-211-1/+1
* [lantiq] default switch setup for WBMRblogic2012-12-211-0/+6
* [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii s...blogic2012-12-212-0/+98
* [lantiq] adds script to set wps info on boards with a wps buttonblogic2012-12-211-0/+16
* [lantiq] minor tweaks to WBMR imageblogic2012-12-212-3/+3
* [gpio-button-hotplug] add OF bindingblogic2012-12-211-3/+117
* [lantiq] add missing PHY_BASIC_FEATURES to 100mbit physblogic2012-12-211-1/+1
* [lantiq] fix typo inside fritz3370 devicetree fileblogic2012-12-211-1/+1
* [lantiq] more devicetree fixesblogic2012-12-217-6/+341
* [lantiq] improve button handlingblogic2012-12-211-11/+39
* [lantiq] add phy-reset gpio handling to xrx200-netblogic2012-12-211-24/+31
* [lantiq] add more lantiq phy ids based on daniels uboot codeblogic2012-12-211-42/+80
* [lantiq] refresh patch and install v1.1 gphy blobsblogic2012-12-211-1859/+14
* [lantiq] adsl firmware in wrong submenublogic2012-12-211-0/+1
* [lantiq] minor cleanup for adsl firmware handlingblogic2012-12-211-12/+8
* [lantiq] properly symlink the adsl firmwareblogic2012-12-211-1/+1
* [kernel] make to rtl8366_smi of binding use gpio_is_validblogic2012-12-211-1/+1
* [package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supiv...mirko2012-12-211-2/+2
* kernel: add solos-pci update for 3.3juhosg2012-12-211-16/+425
* rb532: add support for 3.7juhosg2012-12-203-0/+215
* ramips: Add USB support for DAP-1350 platform.juhosg2012-12-201-0/+1
* rb532: nuke 3.3 supportjuhosg2012-12-203-196/+0
* rb532: switch to 3.6.11juhosg2012-12-201-1/+1
* rb532: add support for 3.6juhosg2012-12-203-0/+206
* ppc44x: add support for 3.7juhosg2012-12-203-0/+302
* kernel: add solos-pci patches from 3.8 for new hardwarejuhosg2012-12-202-32/+800