summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [brcm47xx]: bcma: initialize sprom earlierhauke2012-09-303-4/+222
| | | | | | | | | | The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: run make kernel_oldconfighauke2012-09-301-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: ignore the last page on bcma based SoCshauke2012-09-301-0/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: Fix reading sprom from nvram without a prefixhauke2012-09-305-2/+1189
| | | | | | | | | | | The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: improve the check for the memory sizehauke2012-09-301-0/+42
| | | | | | | This will hopefully fix bug #9360 and #9097 in trunk. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to latest version, should fix clearing ipv6 routes on ↵nbd2012-09-281-2/+2
| | | | | | interface bringup (#12184) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33595 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ltq-dsl] remove dependency for pkillblogic2012-09-282-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33594 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] dont explicitly select wireless-tools. rely on the drivers that ↵blogic2012-09-2811-11/+11
| | | | | | need them to have the right dependency git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [atheros] add support for adm6996 phyblogic2012-09-281-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] tapi was not registeredproperly for most arcadyan boardsblogic2012-09-281-0/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR71xx/9xxx based routers are the most common these days, select that as the ↵kaloz2012-09-281-1/+1
| | | | | | default target git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33590 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add uci support for configuring antenna gainnbd2012-09-282-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33587 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iw: update to 3.6 and add support for configuring antenna gainnbd2012-09-286-269/+124
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33586 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix antenna gain and add support for user-defined antenna gain ↵nbd2012-09-284-3/+228
| | | | | | configuration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33585 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: rework the current tx power display patchnbd2012-09-283-14/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33584 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix beacon IE power constraint handlingnbd2012-09-2815-23/+191
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33583 3c298f89-4303-0410-b956-a3cf2f4a3e73
* build: turn on package parallel builds by default and fix descriptions.nbd2012-09-281-15/+12
| | | | | | By default, this is only used when building with make -j. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33582 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add FIQ support for cns3xxxkaloz2012-09-282-1/+430
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Update board support for Gateworks Laguna Product familykaloz2012-09-281-8/+162
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* USB iso mode fixeskaloz2012-09-281-129/+234
| | | | | | | | | | | Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cmake: update to version 2.8.9nbd2012-09-281-3/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33576 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_macjuhosg2012-09-271-2/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: enable CONFIG_USB_EHCI_TT_NEWSCHEDjuhosg2012-09-271-1/+1
| | | | | | | | | | This feature was experimental in old kernels but that flag has been removed in 2.6.36. Additionally, the option is enabled by default since then. See: http://www.spinics.net/lists/linux-usb/msg31993.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] 6to4: properly setup Base6to4Interface (#12251)jow2012-09-272-5/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33573 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath5k: add a spur mitigation fixnbd2012-09-271-9/+25
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33572 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add memory detection code for RT5350juhosg2012-09-272-1/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: allow to use custom code for memory size detectionjuhosg2012-09-272-6/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uml] include sys/resource.h in arch/um/os-Linux/start_up.c (#12155)florian2012-09-271-0/+10
| | | | | | Required for recent (e)glibc systems git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: fix ncores for single-core systems.kaloz2012-09-271-0/+109
| | | | | | | | | | | For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS shows which ones are active. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: add i2c retrieskaloz2012-09-271-0/+72
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: fix pcie abort handlingkaloz2012-09-271-0/+128
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove kmod-spi-bitbangflorian2012-09-262-2/+2
| | | | | | This is no longer a dependency of kmod-spi-bcm63xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add upstream commit id to codel patches and refresh thosejuhosg2012-09-268-34/+37
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] backport the upstream entropy changes (#11951)florian2012-09-263-8/+1334
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [targets] get rid of the IRQF_SAMPLE_RANDOM flagflorian2012-09-265-7/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] mac80211: refresh patchesflorian2012-09-2614-30/+30
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33557 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add wmbus-repeater to the dLAN USB Extender profileflorian2012-09-251-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] enable multicast and advanced ip routers configsflorian2012-09-251-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profileflorian2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: avoid sending useless delBA frames on client disassocnbd2012-09-251-0/+31
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix rx filtering for older chipsets, helps with multi-bssid and mesh modenbd2012-09-251-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make uci-defaults switch detection work on rt5350blogic2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] add ethernet support for rt5350blogic2012-09-252-18/+106
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] make ramips ethernet use a register mapping tableblogic2012-09-251-29/+79
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm47xx]: activate failsafe on all ports of the switch and not just port 0.hauke2012-09-251-1/+1
| | | | | | | | | | | | Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boardsjuhosg2012-09-253-3/+198
| | | | | | | | | | | | | With these images, it is possible to use the 'unused' partition of the flash. The 'fat' images can be installed with the sysupgrade command. When a 'fat' image is installed from a regular one, the platform specific sysupgrade script copies the calibration data to the end of the flash. Likewise, when a regular image is installed from the 'fat' version the sysupgrade script copies the calibration data back to the original location. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: automatically find WLAN calibration data on TEW-673GRUjuhosg2012-09-251-18/+46
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: automatically find WLAN calibration data on DIR-825-B1juhosg2012-09-251-17/+44
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing backslash to uci-defaults/leds (closes #12240)juhosg2012-09-251-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips] unbreak port mapping detectionblogic2012-09-251-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 19:24:26 +0000