summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsjuhosg2012-01-2611-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: enable support for RaLink Rt53xx USB devices in rt2800usbjuhosg2012-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi! On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote: > The driver works quite nice and stable for me using a RaLink Rt5370 USB device. > > Signed-off-by: Daniel Golle <dgolle@allnet.de> > > Index: package/mac80211/Makefile > =================================================================== > --- package/mac80211/Makefile (revision 29114) > +++ package/mac80211/Makefile (working copy) > @@ -1147,6 +1147,7 @@ > CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \ > CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \ > CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \ > + CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \ > CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \ > CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \ > CONFIG_RTL8192CE= \ Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370. Thanks to actmnophn for the hint! This reverts changeset 29116 and adds it to the right section in the Makefile. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29906 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵juhosg2012-01-255-4/+7
| | | | | | | | | | | | | | | | | | | | | modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix GPIO polarity for button and switchjuhosg2012-01-252-6/+6
| | | | | | | | | | This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to latest, fixes a crash when the interface protocol was not ↵nbd2012-01-241-2/+2
| | | | | | specified git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29903 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] hostapd: introduce a client_cert option which is passed on to ↵jow2012-01-242-2/+5
| | | | | | wpa_supplicant (#8876) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the lzma loader on the Planex boardsjuhosg2012-01-241-3/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImagejuhosg2012-01-241-12/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the AP/Router LED definitons on MZK-W300NHjuhosg2012-01-242-16/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: preset WLAN LED config on MZK-W300NHjuhosg2012-01-241-0/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove hardcoded MTD layout from planex filesjuhosg2012-01-244-164/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: pass mtdlayout to Planex boards via command linejuhosg2012-01-241-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove an unused header filejuhosg2012-01-241-24/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: generate sysupgrade image for the ALL0256Njuhosg2012-01-241-0/+5
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add user-space support for ALL0256Njuhosg2012-01-246-1/+20
| | | | | | | | This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add kernel support for ALL0256Njuhosg2012-01-245-0/+136
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] Initial DSL frameworkblogic2012-01-245-27/+331
| | | | | | | | | | | | | | | - Removed ifx_cpe_control_init.sh (the old init script) - Created dsl_control (/etc/init.d) - tidied up start and stop - stop calls dsl_notify before killing daemon - has status and lucistat options to provide detail - copes with daemon not running situation - Updated package makefile to use new init script and to build cli support - Provide a dsl_notify.sh script to cope with line up/down events Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke fs_all variable in image/Makefilejuhosg2012-01-241-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create interim kernel files in a separate dirjuhosg2012-01-241-66/+68
| | | | | | This reduces the size of the ImageBuilder tarball a lot. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: prebuild all loaders in Image/Prepare stagejuhosg2012-01-241-2/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ImageBuilder: respect the PROFILE parameterjuhosg2012-01-241-4/+5
| | | | | | Based on a patch from #10766 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: merge an upstream workaround for broken clients sending the wrong ↵nbd2012-01-243-3/+21
| | | | | | wpa type (should fix #9561) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: scripts updatesjuhosg2012-01-236-23/+47
| | | | | | | | | | | | | | | | | | | | | | | | In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: 3.2: fix build errors if PCI is not enabledjuhosg2012-01-232-1/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix compiler warning if PCI is not enabledjuhosg2012-01-231-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add initial support for 3.2juhosg2012-01-22200-0/+25484
| | | | | | | | | | | | | | | Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move arch specific files to files-2.6.39juhosg2012-01-22121-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build ALFA AP96 images with default profile as welljuhosg2012-01-221-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: add a uci-defaults script which will migrate the root ↵jow2012-01-222-1/+13
| | | | | | password to /etc/shadow if needed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29865 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to latest version, add some more status info and rework shell ↵nbd2012-01-221-2/+2
| | | | | | proto handler support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29864 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: always issue a reload on ifup, not just for -anbd2012-01-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29863 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: the initial hotplug2 instance sometimes misses a few relevant ↵nbd2012-01-221-0/+1
| | | | | | events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package/kernel: add ATH79 symbols for OHCI/EHCI driversjuhosg2012-01-221-0/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: 3.2: allow to build myloader mtd parser for ATH79juhosg2012-01-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: allow to build myloader mtd parser for 3.2+juhosg2012-01-221-3/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips fix f5d8235-v1 diag LED supportjuhosg2012-01-221-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wrt160nl_part: include module.h and fix compiler warningsjuhosg2012-01-221-3/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: tplinkpart: include module.hjuhosg2012-01-221-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename vsc7385 spi driverjuhosg2012-01-223-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename ap81 spi driverjuhosg2012-01-222-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename rb4xx spi driversjuhosg2012-01-225-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename the nxp_74hc153 driverjuhosg2012-01-222-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change board id of the UniFi boardjuhosg2012-01-222-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: include linux/module.h in the micrel phy driverjuhosg2012-01-221-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add sysled and sysupgrade to wr512-3gnjuhosg2012-01-222-1/+5
| | | | | | Patch from #10035. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: 3.2: don't disable lockdep for OOT modulesjuhosg2012-01-222-0/+95
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rtl8366: add rtl8366_smi_write_reg_noack helperjuhosg2012-01-214-6/+28
| | | | | | | | | After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add support for pcie host controller on bcma based SoCs.hauke2012-01-2112-18/+3927
| | | | | | | This also adds minimal support for the BCMA43224 pcie wireless card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [toolchain/eglibc] eglibc 2.14 needs our eglibc patchset as wellmirko2012-01-213-0/+114
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29842 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] libtool: fix accidental sed invocation in libtoolizejow2012-01-212-5/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29839 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 03:44:38 +0000