summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Fix firewire for 2.6.37+jogo2011-08-025-35/+71
| | | | | | | | The old ieee1394 stack was removed in 2.6.37. The new firewire stack is available for all kernel versions, but experimental for the older one, so make both available where appropriate. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27874 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imagebuilder: clean opkg files if requested (patch from #9866)nbd2011-08-011-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27872 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix a compiler warningnbd2011-08-011-3/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27870 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/quilt: fix spurious calls to the configure and Makefile targets (#8462)nbd2011-08-011-0/+18
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27869 3c298f89-4303-0410-b956-a3cf2f4a3e73
* broadcom-wl: fix setup of virtual interfaces (patch by Nathan Hintz)nbd2011-08-011-0/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27868 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] perf: mark as broken for nowflorian2011-08-011-1/+1
| | | | | | | Until we properly deal with the various versions of libelf we package, mark perf as broken git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add missing chunks to the compat_firmware_class changenbd2011-08-011-0/+60
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27864 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: move compat_firmware_class.ko into compat.ko (fixes #9864)nbd2011-08-012-8/+17
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27863 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] kernel/modules: Add missing config symbolacinonyx2011-08-011-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27862 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: prevent the aggregation code from sending packets to sleeping ↵nbd2011-08-011-0/+22
| | | | | | stations - should fix some latency issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27861 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fold patches that were merged upstream into 300-pending_work.patchnbd2011-08-0127-524/+507
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27860 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gdb: add dependency to libexpat when presentjogo2011-08-011-2/+3
| | | | | | Also prevent gdb from trying to link against the host's libexpat. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27859 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [include] autotools.mk: implement PKG_FIXUP:=patch-libtooljow2011-08-014-1/+438
| | | | | | | | | This change allows to apply OpenWrt, Buildroot and OE libtool fixes to packages which fail badly at autoreconf. The fixup covers the common libtool versions 1.5, 2.2 and 2.4 and automatically determines the correct version to use. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27855 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: enable inotify by default (#8055)nbd2011-07-318-11/+11
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27853 3c298f89-4303-0410-b956-a3cf2f4a3e73
* quilt: make it possible to override the path to getopt (based on patch from ↵nbd2011-07-311-1/+4
| | | | | | #9842) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* squashfs4: fix a compile error on big-endian systems (patch from #9842)nbd2011-07-311-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27851 3c298f89-4303-0410-b956-a3cf2f4a3e73
* squashfs4: add missing include for freebsd (patch from #9842)nbd2011-07-311-1/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27850 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package/kernel: move kmod-fs-mbcache into fs-ext4jogo2011-07-311-23/+9
| | | | | | | mbcache is only needed if xattr support is enabled, but this is only true for ext4 on 2.6.37+, so just bundle it with ext4 when needed. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27849 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] dropbear:jow2011-07-313-7/+38
| | | | | | | | - split port argument at the rightmost colon, allows binding to specific IPv6 addresses - don't use uci ipaddr var but resolve ifname and get addresses from it (#9853) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a new version of my netfilter speedup patches for linux 2.6.39 ↵nbd2011-07-308-0/+443
| | | | | | and 3.0 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* qos-scripts: disable by defaultnbd2011-07-291-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27832 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: fix a compile issue when compiling wpa_supplicant (fixes #9837)nbd2011-07-291-9/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27830 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix switching channel bandwidth from 5/10 back to 20mhznbd2011-07-292-3/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27827 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ppc40x]: upgrade to 3.0 (magicbox ata and openrb usb is broken, but the ↵kaloz2011-07-297-57/+44
| | | | | | current kernel didn't compile at all, so...) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: fix wds interface address handling for multi-bssidnbd2011-07-291-0/+66
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27823 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: use a timeout of 1000ms instead of 100ms for the first gtk rekey ↵nbd2011-07-291-0/+11
| | | | | | eapol frame git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27822 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: fix backward compatibilityjuhosg2011-07-282-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | swconfig fails to load uci configuration after the generic switch identifier changes. root@OpenWrt:/# uci show network | grep switch network.@switch[0]=switch network.@switch[0].name=eth0 network.@switch[0].reset=1 network.@switch[0].enable_vlan=1 network.@switch_vlan[0]=switch_vlan network.@switch_vlan[0].device=eth0 network.@switch_vlan[0].vlan=1 network.@switch_vlan[0].ports=0t 2 3 4 5 network.@switch_vlan[1]=switch_vlan network.@switch_vlan[1].device=eth0 network.@switch_vlan[1].vlan=2 network.@switch_vlan[1].ports=0t 1 root@OpenWrt:/# swconfig dev eth0 load /etc/config/network Failed to apply configuration for switch 'switch0' root@OpenWrt:/# swconfig dev switch0 load /etc/config/network Failed to apply configuration for switch 'switch0' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27820 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: remove zero-length patchesnbd2011-07-285-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27819 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: version bump to 2.4.5nbd2011-07-2825-1434/+113
| | | | | | | | | | | | | | Bump to the current version of PPP. A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed. 1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP. Redux: re-instate the commenting out of the exponential back-off as requested by Felix. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NHjogo2011-07-2810-53/+18
| | | | | | | | Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Netcore NW718 boardjuhosg2011-07-2810-1/+189
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the Asus RT-G32 B1 boardjuhosg2011-07-289-1/+143
| | | | | | Based on a patch by: Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: enable M25P80 driverjuhosg2011-07-281-0/+2
| | | | | | Based on a patch by Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: introduce rt305x_register_spi helperjuhosg2011-07-282-0/+24
| | | | | | Based on a patch by Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add SPI controller driverjuhosg2011-07-284-0/+589
| | | | | | Based on a patch by Sergiy <piratfm@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsjuhosg2011-07-287-5/+23
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: change machine id for DIR-300juhosg2011-07-284-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: rename LEDs on the DIR-300-B1juhosg2011-07-282-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27806 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: sort Kconfig/Makefile entriesjuhosg2011-07-282-19/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: fix uci-defaults/network script for the RT3350 based boardsjuhosg2011-07-281-2/+2
| | | | | | | | | | | This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27804 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix PWH2004 image generationjuhosg2011-07-281-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: Add generic switch identifiersjogo2011-07-278-16/+49
| | | | | | | | Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: warn when calling /etc/init.d/<script> enable and neither START ↵nbd2011-07-271-0/+4
| | | | | | nor STOP is defined git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27797 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] firewall: prevent redundant rules if multiple ports and multiple ↵jow2011-07-262-8/+17
| | | | | | icmp types are given in a rule block for both icmp and other protocols git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27792 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: rework tx power handling - display the correct *current* tx power, ↵nbd2011-07-266-0/+313
| | | | | | and also fix tx power limits with ATH_USER_REGD set git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27788 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/alix2: include WAN interface by defaultnbd2011-07-261-1/+7
| | | | | | | | Include WAN interface by default, instead of putting both ports in the LAN bridge. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27787 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/alix2: fix typo in target makefilenbd2011-07-261-2/+2
| | | | | | | | Cut and paste cruft from borrowing from Geos platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27786 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: merge a few pending fixes for channel switch handlingnbd2011-07-261-0/+28
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] linux-atm: don't fail if an PREFIX env var is setjow2011-07-261-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27779 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] base-files: use "reboot -f" after sysupgrade to prevent executing ↵jow2011-07-252-2/+2
| | | | | | deleted init scripts git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27776 3c298f89-4303-0410-b956-a3cf2f4a3e73