summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* generic: ar8216: use phydev instead of pdev everywherejuhosg2013-02-111-33/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: use pr_* macros for kernel messagesjuhosg2013-02-111-8/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* odhcp6c: Various bugfixescyrus2013-02-111-2/+2
| | | | | | | * Don't send undesired suggestions for preferred and valid lifetimes * Be less verbose in logging git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: fix PHY features setupjuhosg2013-02-111-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add ar8xxx_probe_switch helperjuhosg2013-02-101-31/+42
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stopjuhosg2013-02-101-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: free mib counters from ar8xxx_freejuhosg2013-02-101-4/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add ar8xxx_free helperjuhosg2013-02-101-6/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add ar8xxx_create{,mii} helpersjuhosg2013-02-101-14/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: remove redundant phy address checkjuhosg2013-02-101-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: only set phy_ptr if packet mangling is usedjuhosg2013-02-101-2/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add defines for the AR8316 POSTRIP registerjuhosg2013-02-102-2/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: don't probe the chip multiple timesjuhosg2013-02-101-8/+8
| | | | | | | | It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add sanity check to ar8216_probejuhosg2013-02-101-0/+41
| | | | | | | | | Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: skip probe on unused PHY addressesjuhosg2013-02-101-0/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: register the micro sd card reader on RB493Gjogo2013-02-101-0/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: b53: fix reverted error check in probejogo2013-02-101-1/+1
| | | | | | | | | | | | b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: handle huawei nvram layoutjogo2013-02-108-10/+108
| | | | | | | | | Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35533 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: move sleep out of the loopjuhosg2013-02-091-1/+2
| | | | | | | | | | It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* polarssl: security update (1.2.5) addressing CBC TLS issueyardley2013-02-082-15/+15
| | | | | | | | Signed-off-by: Tim Yardley <yardley@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openssl: security update to 1.0.1d to address CBC TLS issueyardley2013-02-086-79/+15
| | | | | | | | | | | addressing CVE-2013-0169: 4th February 2013 Signed-off-by: Tim Yardley <yardley@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35524 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Routerboard 751 Mac Address Offset Fixjuhosg2013-02-081-2/+10
| | | | | | | | | | | | | | | We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35519 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: simplify phy features setupjuhosg2013-02-081-11/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35518 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: don't use mdio bus specific functions in ar8216_id_chipjuhosg2013-02-081-8/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35517 3c298f89-4303-0410-b956-a3cf2f4a3e73
* toolchain/eglibc: add support for 2.17florian2013-02-073-0/+11
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35515 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: use inline function to convert swdev to ar8216juhosg2013-02-071-15/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add mii_bus field to struct ar8216_privjuhosg2013-02-071-11/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: mvswitch: add detach callbackjuhosg2013-02-071-1/+12
| | | | | | | | | | | Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35512 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: add detach callbackjuhosg2013-02-071-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add detach callback to struct phy_driverjuhosg2013-02-078-4/+112
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35510 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix name of kmod-ocf-ubsec-ssbhauke2013-02-061-1/+1
| | | | | | | | | This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openvpn-easy-rsa: fix typo in version (#12958)nbd2013-02-061-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: bgmac: make it possible to set the devices into promisc mode when ↵hauke2013-02-062-0/+206
| | | | | | | | | it is already up This fixes #12927. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove support for 3.6 kernelflorian2013-02-05117-14251/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] make default version 3.7.6florian2013-02-051-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove superfluous calls to /lib/brcm63xx.shflorian2013-02-053-6/+1
| | | | | | | | | | The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove references to the old switch driverflorian2013-02-051-15/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35503 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix trx checksum after first boot and add led/button definitions for boards ↵mirko2013-02-052-0/+12
| | | | | | RTA770BW and RTA770W git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add support for board named RTA770Wmirko2013-02-054-1/+215
| | | | | | | | | | Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35500 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openvpn: remove the stale PKG_REV variablenbd2013-02-051-1/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35499 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openvpn: split easy-rsa into a separate package, it is no longer bundled ↵nbd2013-02-054-25/+60
| | | | | | with the release tarball git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: clear driver specific data pointer in phy_devicejuhosg2013-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35497 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: ar8216: unregister switch on error pathjuhosg2013-02-051-4/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35496 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: enable GPIO sysfs interfacejuhosg2013-02-051-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35495 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: enable Freescale eSPI driver and m25p80 supportjuhosg2013-02-051-1/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35494 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: sync kernel configjuhosg2013-02-051-2/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35493 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix detection of Asus RT-N16hauke2013-02-041-3/+4
| | | | | | | This fixes #12936. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35492 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add Failsafe support for Linksys E3000V1 / WRT610NV2hauke2013-02-041-0/+1
| | | | | | | | | | | | | | Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35491 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: Fix switch config on 4716/53115 deviceshauke2013-02-041-1/+1
| | | | | | | Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35490 3c298f89-4303-0410-b956-a3cf2f4a3e73
* coldfire: R.I.P.juhosg2013-02-0459-91649/+0
| | | | | | | | | The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35489 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 22:36:14 +0000