summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: unify LED names on D-Link boardsjuhosg2012-01-3110-63/+61
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: support for D-LINK DIR-615 rev. E4juhosg2012-01-3115-7/+428
| | | | | | | | | | | | | | | | | | | | This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-MR11Ujuhosg2012-01-3114-7/+272
| | | | | | | | | | | | | | | | | | | Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compress kernel binaries in Image/Prepare stagejuhosg2012-01-311-2/+2
| | | | | | The lzma compressed kernel is used by one of the loaders. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use dynamically allocated partitions in wrt160nl_partjuhosg2012-01-312-5/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: change vlan_config for the ALFA W502U boardjuhosg2012-01-311-1/+1
| | | | | | This change moves the WAN port into a separate VLAN. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29969 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.2 to 3.2.2jogo2012-01-318-25/+15
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29967 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.1 to 3.1.10jogo2012-01-315-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29966 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.0 to 3.0.18jogo2012-01-3110-12/+12
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29965 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] build 96348R imagesflorian2012-01-301-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] remove support for 2.6.39florian2012-01-3040-5202/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29959 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [brcm63xx] bump to 3.0.17florian2012-01-301-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29958 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] fix wprobe build for arm on 3.2florian2012-01-301-0/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29957 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] ebtales: update to v2.0.10-4florian2012-01-301-3/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [au1000] add missing config symbolsflorian2012-01-302-0/+10
| | | | | | Thanks KanjiMonster git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29955 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] fix gpiommc build failure with 3.2florian2012-01-301-1/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [x86] create a config-3.2 for upcoming changes, rebase config-default to 2.6.39jow2012-01-302-130/+442
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29953 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [buildroot] rules.mk: filter "." and "./" entries from $PATH, prevents ↵jow2012-01-291-1/+1
| | | | | | toolchain build issues and likely other problems git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29951 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [scripts] patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after ↵jow2012-01-291-1/+1
| | | | | | the version tag, cope with that git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29948 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [scripts] download.pl: remove ftp.geo.kernel.org mirror, it does not resolvejow2012-01-291-2/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29947 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [scripts] ext-toolchain.sh: rework generated gcc wrapperjow2012-01-291-13/+44
| | | | | | | | Only append -L and -Wl,-rpath-link flags if the command line contains -l, -L, -shared or -static flags; this is needed to suppress "-rpath-link: linker input file unused because linking not done" on each cc invocation. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [scripts] patch-specs.sh: fallback to ext-toolchain.sh --wrap if spec file ↵jow2012-01-291-35/+61
| | | | | | patching is not possible (gcc < 4.3.0) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29945 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [scripts] ext-toolchain.sh: support --wrap with src == destjow2012-01-291-3/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29944 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ep93xx] add default and Sim.One profilesflorian2012-01-292-0/+39
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ep93xx] add 3.2 supportflorian2012-01-295-1/+1528
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29941 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] add another 3.2 framebuffer symbolflorian2012-01-291-0/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29940 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [au1000] add support for 3.2 kernelflorian2012-01-295-1/+319
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* switch: fix some memory leaks in switch_parse_vlan()hauke2012-01-283-7/+8
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] add support for the Atheros AP113 reference boardflorian2012-01-2814-12/+316
| | | | | | | | | This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] refresh 3.2 patchesflorian2012-01-2812-19/+20
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] autoconf: another relocatability fix for autom4te, substitute ↵jow2012-01-281-0/+13
| | | | | | hardcoded prefix with $STAGING_DIR when reading autom4te.cfg git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29931 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] automake: generate relative aclocal symlinks in staging_dirjow2012-01-281-4/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29929 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [sdk] make sure .config gets copied as filejow2012-01-281-1/+1
| | | | | | | | | | When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add fix for cardbus host controllerhauke2012-01-272-0/+44
| | | | | | | These devices have two devices on the bus, the host controller itself and the device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29923 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix patch when running on ssb based deviceshauke2012-01-271-5/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: revert one more linux upstream commit in the initvals to fully fix ↵nbd2012-01-271-96/+112
| | | | | | the ar938x tx power issue git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29920 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: fix initvals for high-power ar938x devices, fixes tx power on buffalo ↵nbd2012-01-271-0/+192
| | | | | | wzr-hp-g450h git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29918 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use 64k block size for WZR-HP-AG300Hjuhosg2012-01-271-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade image building of atheros boards after r29899juhosg2012-01-271-10/+10
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create the temporary directory before building initramfs imagesjuhosg2012-01-261-1/+1
| | | | | | Thanks to Florian for reporting. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create a profile and build images for Compex WPE72juhosg2012-01-262-0/+17
| | | | | | | | | [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mkmylofw: add WPE72 supportjuhosg2012-01-262-0/+4
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Compex WPE72/WPE72NXjuhosg2012-01-2611-4/+230
| | | | | | | | | | | This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add WPE72 ID to myloader.hjuhosg2012-01-261-0/+1
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsjuhosg2012-01-2611-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: enable support for RaLink Rt53xx USB devices in rt2800usbjuhosg2012-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi! On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote: > The driver works quite nice and stable for me using a RaLink Rt5370 USB device. > > Signed-off-by: Daniel Golle <dgolle@allnet.de> > > Index: package/mac80211/Makefile > =================================================================== > --- package/mac80211/Makefile (revision 29114) > +++ package/mac80211/Makefile (working copy) > @@ -1147,6 +1147,7 @@ > CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \ > CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \ > CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \ > + CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \ > CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \ > CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \ > CONFIG_RTL8192CE= \ Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370. Thanks to actmnophn for the hint! This reverts changeset 29116 and adds it to the right section in the Makefile. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29906 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵juhosg2012-01-255-4/+7
| | | | | | | | | | | | | | | | | | | | | modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-MR3020: fix GPIO polarity for button and switchjuhosg2012-01-252-6/+6
| | | | | | | | | | This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to latest, fixes a crash when the interface protocol was not ↵nbd2012-01-241-2/+2
| | | | | | specified git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29903 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] hostapd: introduce a client_cert option which is passed on to ↵jow2012-01-242-2/+5
| | | | | | wpa_supplicant (#8876) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29901 3c298f89-4303-0410-b956-a3cf2f4a3e73