diff options
Diffstat (limited to 'target')
7 files changed, 120 insertions, 60 deletions
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig index cb7739a52..1c4a91ad8 100644 --- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig @@ -3,7 +3,14 @@ if ADM5120 menu "ADM5120 Board selection" config ADM5120_MACH_CAS_771 - bool "Cellvision CAS-771 support" + bool "Cellvision CAS-771/771W support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_CELLVISION + default y + +config ADM5120_MACH_NFS_101 + bool "Cellvision NFS-101U/101WU support" depends on CPU_LITTLE_ENDIAN select ADM5120_SOC_BGA select ADM5120_OEM_CELLVISION diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile index 189951e60..a949fc9f6 100644 --- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile @@ -1 +1,4 @@ -obj-y += cellvision.o
\ No newline at end of file +obj-y += cellvision.o + +obj-$(CONFIG_ADM5120_MACH_CAS_771) += cas-771.o +obj-$(CONFIG_ADM5120_MACH_NFS_101) += nfs-101.o diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c new file mode 100644 index 000000000..26995bb0a --- /dev/null +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c @@ -0,0 +1,36 @@ +/* + * Cellvision/SparkLAN CAS-771/771W support + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cellvision.h" + +static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) +}; + +static struct gpio_led cas771_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL), + /* GPIO PIN3 is the reset */ + GPIO_LED_STD(ADM5120_GPIO_PIN6, "access", NULL), + GPIO_LED_STD(ADM5120_GPIO_P0L1, "status", NULL), + GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag", NULL), +}; + +static void __init cas771_setup(void) +{ + cas7xx_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds), + cas771_gpio_leds); + adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs); +} + +ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup); diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c index f58a8fef4..2b90ce16d 100644 --- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c @@ -9,16 +9,7 @@ * */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> - -#include <asm/bootinfo.h> - -#include <asm/mach-adm5120/adm5120_info.h> -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> -#include <asm/mach-adm5120/adm5120_irq.h> +#include "cellvision.h" #define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 #define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20) @@ -71,20 +62,6 @@ static struct mtd_partition cas7xx_partitions[] = { }; #endif /* CONFIG_MTD_PARTITIONS */ -static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) -}; - -static struct gpio_led cas771_gpio_leds[] __initdata = { - GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL), - /* GPIO PIN3 is the reset */ - GPIO_LED_STD(ADM5120_GPIO_PIN6, "access", NULL), - GPIO_LED_STD(ADM5120_GPIO_P0L1, "status", NULL), - GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag", NULL), -}; - static void switch_bank_gpio5(unsigned bank) { switch (bank) { @@ -97,7 +74,7 @@ static void switch_bank_gpio5(unsigned bank) } } -static void __init cellvision_generic_setup(void) +static void __init cellvision_flash_setup(void) { /* setup flash A20 line */ gpio_request(CELLVISION_GPIO_FLASH_A20, NULL); @@ -107,59 +84,45 @@ static void __init cellvision_generic_setup(void) adm5120_add_device_flash(0); } -static void __init cas6xx_setup(void) +void __init cas6xx_flash_setup(void) { #ifdef CONFIG_MTD_PARTITIONS adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); adm5120_flash0_data.parts = cas6xx_partitions; #endif /* CONFIG_MTD_PARTITIONS */ - cellvision_generic_setup(); - adm5120_add_device_switch(1, NULL); + cellvision_flash_setup(); } -ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup); -ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup); - -static void __init cas7xx_setup(void) +void __init cas7xx_flash_setup(void) { #ifdef CONFIG_MTD_PARTITIONS adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); adm5120_flash0_data.parts = cas7xx_partitions; #endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_switch(1, NULL); + cellvision_flash_setup(); } -ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup); -ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup); -ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup); - -static void __init cas771_setup(void) +#if 0 +void __init cas6xx_setup(void) { - cas7xx_setup(); - adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds), - cas771_gpio_leds); - adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs); + cas6xx_flash_setup(); + adm5120_add_device_switch(1, NULL); } -ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup); - -static u8 nfs_vlans[6] __initdata = { /* TODO: not tested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; +ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup); +ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup); +#endif -static void __init nfs_setup(void) +void __init cas7xx_setup(void) { -#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; -#endif /* CONFIG_MTD_PARTITIONS */ - - cellvision_generic_setup(); - adm5120_add_device_switch(5, nfs_vlans); - - /* TODO: add PCI IRQ map */ + cas7xx_flash_setup(); + adm5120_add_device_switch(1, NULL); } -ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs_setup); +#if 0 +ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup); +ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup); +ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup); +#endif diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h new file mode 100644 index 000000000..c7c6a1e19 --- /dev/null +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h @@ -0,0 +1,26 @@ +/* + * Cellvision/SparkLAN boards + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <asm/bootinfo.h> + +#include <asm/mach-adm5120/adm5120_info.h> +#include <asm/mach-adm5120/adm5120_board.h> +#include <asm/mach-adm5120/adm5120_platform.h> +#include <asm/mach-adm5120/adm5120_irq.h> + +extern void cas6xx_flash_setup(void) __init; +extern void cas7xx_flash_setup(void) __init; +extern void cas6xx_setup(void) __init; +extern void cas7xx_setup(void) __init; diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c new file mode 100644 index 000000000..efd4e5758 --- /dev/null +++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c @@ -0,0 +1,24 @@ +/* + * Cellvision/SparkLAN NFS-101U/WU support + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cellvision.h" + +static u8 nfs101_vlans[6] __initdata = { /* TODO: not tested */ + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static void __init nfs101_setup(void) +{ + cas6xx_flash_setup(); + adm5120_add_device_switch(5, nfs101_vlans); +} + +ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs101_setup); diff --git a/target/linux/adm5120/router_le/config-2.6.26 b/target/linux/adm5120/router_le/config-2.6.26 index 968038d3e..622d74186 100644 --- a/target/linux/adm5120/router_le/config-2.6.26 +++ b/target/linux/adm5120/router_le/config-2.6.26 @@ -11,6 +11,7 @@ CONFIG_ADM5120_MACH_EASY5120P_ATA=y CONFIG_ADM5120_MACH_EASY5120_RT=y CONFIG_ADM5120_MACH_EASY5120_WVOIP=y CONFIG_ADM5120_MACH_EASY83000=y +CONFIG_ADM5120_MACH_NFS_101=y CONFIG_ADM5120_MACH_NP27G=y CONFIG_ADM5120_MACH_NP28G=y CONFIG_ADM5120_MACH_RB_11X=y |