summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm47xx/config-3.011
-rw-r--r--target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch274
-rw-r--r--target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch48
-rw-r--r--target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch307
-rw-r--r--target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch323
-rw-r--r--target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch402
-rw-r--r--target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch151
-rw-r--r--target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch204
-rw-r--r--target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch140
-rw-r--r--target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch37
-rw-r--r--target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch439
-rw-r--r--target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch395
-rw-r--r--target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch410
-rw-r--r--target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch37
-rw-r--r--target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch20
-rw-r--r--target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch6
-rw-r--r--target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch4
-rw-r--r--target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch78
-rw-r--r--target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch8
-rw-r--r--target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch22
-rw-r--r--target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch16
-rw-r--r--target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch33
-rw-r--r--target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch2
23 files changed, 3320 insertions, 47 deletions
diff --git a/target/linux/brcm47xx/config-3.0 b/target/linux/brcm47xx/config-3.0
index 2a3e743f1..4c2b62c6b 100644
--- a/target/linux/brcm47xx/config-3.0
+++ b/target/linux/brcm47xx/config-3.0
@@ -14,7 +14,16 @@ CONFIG_B44_PCI=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BRCMUTIL is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -31,6 +40,7 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
@@ -118,6 +128,7 @@ CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SPROM=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
diff --git a/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch b/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch
new file mode 100644
index 000000000..e535617c7
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch
@@ -0,0 +1,274 @@
+From c4fb5adbe45b3a1cfc509a64bb92429ab0d6fc37 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 11 Jun 2011 16:47:38 +0200
+Subject: [PATCH 01/14] bcma: move parsing of EEPROM into own function.
+
+Move the parsing of the EEPROM data in scan function for one core into
+an own function. Now we are able to use it in some other scan function
+as well.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 230 ++++++++++++++++++++++++++-------------------------
+ 1 files changed, 118 insertions(+), 112 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -200,16 +200,124 @@ static s32 bcma_erom_get_addr_desc(struc
+ return addrl;
+ }
+
++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
++ struct bcma_device *core)
++{
++ s32 tmp;
++ u8 i, j;
++ s32 cia, cib;
++ u8 ports[2], wrappers[2];
++
++ /* get CIs */
++ cia = bcma_erom_get_ci(bus, eromptr);
++ if (cia < 0) {
++ bcma_erom_push_ent(eromptr);
++ if (bcma_erom_is_end(bus, eromptr))
++ return -ESPIPE;
++ return -EILSEQ;
++ }
++ cib = bcma_erom_get_ci(bus, eromptr);
++ if (cib < 0)
++ return -EILSEQ;
++
++ /* parse CIs */
++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
++
++ if (((core->id.manuf == BCMA_MANUF_ARM) &&
++ (core->id.id == 0xFFF)) ||
++ (ports[1] == 0)) {
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENXIO;
++ }
++
++ /* check if component is a core at all */
++ if (wrappers[0] + wrappers[1] == 0) {
++ /* we could save addrl of the router
++ if (cid == BCMA_CORE_OOB_ROUTER)
++ */
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENXIO;
++ }
++
++ if (bcma_erom_is_bridge(bus, eromptr)) {
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENXIO;
++ }
++
++ /* get & parse master ports */
++ for (i = 0; i < ports[0]; i++) {
++ u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
++ if (mst_port_d < 0)
++ return -EILSEQ;
++ }
++
++ /* get & parse slave ports */
++ for (i = 0; i < ports[1]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_SLAVE, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: slave port %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->addr = tmp;
++ }
++ }
++ }
++
++ /* get & parse master wrappers */
++ for (i = 0; i < wrappers[0]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_MWRAP, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->wrap = tmp;
++ }
++ }
++ }
++
++ /* get & parse slave wrappers */
++ for (i = 0; i < wrappers[1]; i++) {
++ u8 hack = (ports[1] == 1) ? 0 : 1;
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_SWRAP, i + hack);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (wrappers[0] == 0 && !i && !j)
++ core->wrap = tmp;
++ }
++ }
++ }
++ return 0;
++}
++
+ int bcma_bus_scan(struct bcma_bus *bus)
+ {
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+- s32 cia, cib;
+- u8 ports[2], wrappers[2];
+-
+ s32 tmp;
+- u8 i, j;
+
+ int err;
+
+@@ -236,112 +344,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+- /* get CIs */
+- cia = bcma_erom_get_ci(bus, &eromptr);
+- if (cia < 0) {
+- bcma_erom_push_ent(&eromptr);
+- if (bcma_erom_is_end(bus, &eromptr))
+- break;
+- err= -EILSEQ;
+- goto out;
+- }
+- cib = bcma_erom_get_ci(bus, &eromptr);
+- if (cib < 0) {
+- err= -EILSEQ;
+- goto out;
+- }
+-
+- /* parse CIs */
+- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+-
+- if (((core->id.manuf == BCMA_MANUF_ARM) &&
+- (core->id.id == 0xFFF)) ||
+- (ports[1] == 0)) {
+- bcma_erom_skip_component(bus, &eromptr);
++ err = bcma_get_next_core(bus, &eromptr, core);
++ if (err == -ENXIO)
+ continue;
+- }
+-
+- /* check if component is a core at all */
+- if (wrappers[0] + wrappers[1] == 0) {
+- /* we could save addrl of the router
+- if (cid == BCMA_CORE_OOB_ROUTER)
+- */
+- bcma_erom_skip_component(bus, &eromptr);
+- continue;
+- }
+-
+- if (bcma_erom_is_bridge(bus, &eromptr)) {
+- bcma_erom_skip_component(bus, &eromptr);
+- continue;
+- }
+-
+- /* get & parse master ports */
+- for (i = 0; i < ports[0]; i++) {
+- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+- if (mst_port_d < 0) {
+- err= -EILSEQ;
+- goto out;
+- }
+- }
+-
+- /* get & parse slave ports */
+- for (i = 0; i < ports[1]; i++) {
+- for (j = 0; ; j++) {
+- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+- SCAN_ADDR_TYPE_SLAVE, i);
+- if (tmp < 0) {
+- /* no more entries for port _i_ */
+- /* pr_debug("erom: slave port %d "
+- * "has %d descriptors\n", i, j); */
+- break;
+- } else {
+- if (i == 0 && j == 0)
+- core->addr = tmp;
+- }
+- }
+- }
+-
+- /* get & parse master wrappers */
+- for (i = 0; i < wrappers[0]; i++) {
+- for (j = 0; ; j++) {
+- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+- SCAN_ADDR_TYPE_MWRAP, i);
+- if (tmp < 0) {
+- /* no more entries for port _i_ */
+- /* pr_debug("erom: master wrapper %d "
+- * "has %d descriptors\n", i, j); */
+- break;
+- } else {
+- if (i == 0 && j == 0)
+- core->wrap = tmp;
+- }
+- }
+- }
+-
+- /* get & parse slave wrappers */
+- for (i = 0; i < wrappers[1]; i++) {
+- u8 hack = (ports[1] == 1) ? 0 : 1;
+- for (j = 0; ; j++) {
+- tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+- SCAN_ADDR_TYPE_SWRAP, i + hack);
+- if (tmp < 0) {
+- /* no more entries for port _i_ */
+- /* pr_debug("erom: master wrapper %d "
+- * has %d descriptors\n", i, j); */
+- break;
+- } else {
+- if (wrappers[0] == 0 && !i && !j)
+- core->wrap = tmp;
+- }
+- }
+- }
++ else if (err == -ESPIPE)
++ break;
++ else if (err < 0)
++ return err;
+
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+@@ -351,9 +360,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
+
+ core->core_index = bus->nr_cores++;
+ list_add(&core->list, &bus->cores);
+- continue;
+-out:
+- return err;
+ }
+
+ return 0;
diff --git a/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch b/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch
new file mode 100644
index 000000000..8a2de51c4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch
@@ -0,0 +1,48 @@
+From dd6cbe9b9e2ae563659b34184f4cd9d905dc90d5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 11:55:47 +0200
+Subject: [PATCH 02/14] bcma: move initializing of struct bcma_bus to own function.
+
+This makes it possible to use this code in some other method.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 17 +++++++++++------
+ 1 files changed, 11 insertions(+), 6 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -312,15 +312,10 @@ static int bcma_get_next_core(struct bcm
+ return 0;
+ }
+
+-int bcma_bus_scan(struct bcma_bus *bus)
++static void bcma_init_bus(struct bcma_bus *bus)
+ {
+- u32 erombase;
+- u32 __iomem *eromptr, *eromend;
+-
+ s32 tmp;
+
+- int err;
+-
+ INIT_LIST_HEAD(&bus->cores);
+ bus->nr_cores = 0;
+
+@@ -330,6 +325,16 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++}
++
++int bcma_bus_scan(struct bcma_bus *bus)
++{
++ u32 erombase;
++ u32 __iomem *eromptr, *eromend;
++
++ int err;
++
++ bcma_init_bus(bus);
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ eromptr = bus->mmio;
diff --git a/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch
new file mode 100644
index 000000000..c18249d1d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch
@@ -0,0 +1,307 @@
+From 9a920f4d8eed485f7b73e9b13dab0e49c64d3ff8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 14:30:55 +0200
+Subject: [PATCH 03/14] bcma: add functions to scan cores needed on SoCs
+
+The chip common and mips core have to be setup early in the boot
+process to get the cpu clock.
+bcma_bus_early_register() gets pointers to some space to store the core
+data and searches for the chip common and mips core and initializes
+chip common. After that was done and the kernel is out of early boot we
+just have to run bcma_bus_register() and it will search for the other
+cores, initialize and register them.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 7 ++
+ drivers/bcma/driver_chipcommon.c | 5 ++
+ drivers/bcma/driver_pci.c | 3 +
+ drivers/bcma/main.c | 45 +++++++++++++
+ drivers/bcma/scan.c | 95 +++++++++++++++++++++++++--
+ include/linux/bcma/bcma.h | 1 +
+ include/linux/bcma/bcma_driver_chipcommon.h | 1 +
+ 7 files changed, 151 insertions(+), 6 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -15,9 +15,16 @@ struct bcma_bus;
+ /* main.c */
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++ struct bcma_device *core_cc,
++ struct bcma_device *core_mips);
+
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++ struct bcma_device_id *match,
++ struct bcma_device *core);
++void bcma_init_bus(struct bcma_bus *bus);
+
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked
+
+ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+ {
++ if (cc->setup_done)
++ return;
++
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+@@ -38,6 +41,8 @@ void bcma_core_chipcommon_init(struct bc
+ bcma_pmu_init(cc);
+ if (cc->capabilities & BCMA_CC_CAP_PCTL)
+ pr_err("Power control not implemented!\n");
++
++ cc->setup_done = true;
+ }
+
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -159,7 +159,10 @@ static void bcma_pcicore_serdes_workarou
+
+ void bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
++ if (pc->setup_done)
++ return;
+ bcma_pcicore_serdes_workaround(pc);
++ pc->setup_done = true;
+ }
+
+ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -167,6 +167,51 @@ void bcma_bus_unregister(struct bcma_bus
+ bcma_unregister_cores(bus);
+ }
+
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++ struct bcma_device *core_cc,
++ struct bcma_device *core_mips)
++{
++ int err;
++ struct bcma_device *core;
++ struct bcma_device_id match;
++
++ bcma_init_bus(bus);
++
++ match.manuf = BCMA_MANUF_BCM;
++ match.id = BCMA_CORE_CHIPCOMMON;
++ match.class = BCMA_CL_SIM;
++ match.rev = BCMA_ANY_REV;
++
++ /* Scan for devices (cores) */
++ err = bcma_bus_scan_early(bus, &match, core_cc);
++ if (err) {
++ pr_err("Failed to scan for common core: %d\n", err);
++ return -1;
++ }
++
++ match.manuf = BCMA_MANUF_MIPS;
++ match.id = BCMA_CORE_MIPS_74K;
++ match.class = BCMA_CL_SIM;
++ match.rev = BCMA_ANY_REV;
++
++ err = bcma_bus_scan_early(bus, &match, core_mips);
++ if (err) {
++ pr_err("Failed to scan for mips core: %d\n", err);
++ return -1;
++ }
++
++ /* Init CC core */
++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_init(&bus->drv_cc);
++ }
++
++ pr_info("Early bus registered\n");
++
++ return 0;
++}
++
+ int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+ {
+ drv->drv.name = drv->name;
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -200,7 +200,20 @@ static s32 bcma_erom_get_addr_desc(struc
+ return addrl;
+ }
+
++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
++ u16 index)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->core_index == index)
++ return core;
++ }
++ return NULL;
++}
++
+ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
++ struct bcma_device_id *match, int core_num,
+ struct bcma_device *core)
+ {
+ s32 tmp;
+@@ -251,6 +264,21 @@ static int bcma_get_next_core(struct bcm
+ return -ENXIO;
+ }
+
++ if (bcma_find_core_by_index(bus, core_num)) {
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENODEV;
++ }
++
++ if (match && ((match->manuf != BCMA_ANY_MANUF &&
++ match->manuf != core->id.manuf) ||
++ (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
++ )) {
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENODEV;
++ }
++
+ /* get & parse master ports */
+ for (i = 0; i < ports[0]; i++) {
+ u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+@@ -312,10 +340,13 @@ static int bcma_get_next_core(struct bcm
+ return 0;
+ }
+
+-static void bcma_init_bus(struct bcma_bus *bus)
++void bcma_init_bus(struct bcma_bus *bus)
+ {
+ s32 tmp;
+
++ if (bus->init_done)
++ return;
++
+ INIT_LIST_HEAD(&bus->cores);
+ bus->nr_cores = 0;
+
+@@ -325,6 +356,7 @@ static void bcma_init_bus(struct bcma_bu
+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++ bus->init_done = true;
+ }
+
+ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -332,7 +364,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+- int err;
++ int err, core_num = 0;
+
+ bcma_init_bus(bus);
+
+@@ -349,23 +381,74 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+- err = bcma_get_next_core(bus, &eromptr, core);
+- if (err == -ENXIO)
++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
++ if (err == -ENODEV) {
++ core_num++;
++ continue;
++ } else if (err == -ENXIO)
+ continue;
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+ return err;
+
++ core->core_index = core_num++;
++ bus->nr_cores++;
++
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- bus->nr_cores, bcma_device_name(&core->id),
++ core->core_index, bcma_device_name(&core->id),
+ core->id.manuf, core->id.id, core->id.rev,
+ core->id.class);
+
+- core->core_index = bus->nr_cores++;
+ list_add(&core->list, &bus->cores);
+ }
+
+ return 0;
+ }
++
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++ struct bcma_device_id *match,
++ struct bcma_device *core)
++{
++ u32 erombase;
++ u32 __iomem *eromptr, *eromend;
++
++ int err, core_num = 0;
++
++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
++ eromptr = bus->mmio;
++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
++
++ bcma_scan_switch_core(bus, erombase);
++
++ while (eromptr < eromend) {
++ memset(core, 0, sizeof(*core));
++ INIT_LIST_HEAD(&core->list);
++ core->bus = bus;
++
++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
++ if (err == -ENODEV) {
++ core_num++;
++ continue;
++ } else if (err == -ENXIO)
++ continue;
++ else if (err == -ESPIPE)
++ break;
++ else if (err < 0)
++ return err;
++
++ core->core_index = core_num++;
++ bus->nr_cores++;
++ pr_info("Core %d found: %s "
++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ core->core_index, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
++
++ list_add(&core->list, &bus->cores);
++ return 0;
++ }
++
++ return -ENODEV;
++}
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -185,6 +185,7 @@ struct bcma_bus {
+ struct bcma_device *mapped_core;
+ struct list_head cores;
+ u8 nr_cores;
++ u8 init_done:1;
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -259,6 +259,7 @@ struct bcma_drv_cc {
+ u32 status;
+ u32 capabilities;
+ u32 capabilities_ext;
++ u8 setup_done:1;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
diff --git a/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch b/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch
new file mode 100644
index 000000000..10099d103
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch
@@ -0,0 +1,323 @@
+From a807b2fb233af60028ed38ba237953bcffdf33e9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 18 Jun 2011 14:31:53 +0200
+Subject: [PATCH 04/14] bcma: add SOC bus
+
+This patch adds support for using bcma on an embedded bus. An embedded
+system like the bcm4716 could register this bus and it searches for the
+bcma cores then.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig | 5 +
+ drivers/bcma/Makefile | 1 +
+ drivers/bcma/host_soc.c | 178 +++++++++++++++++++++++++++++++++++++++++
+ drivers/bcma/main.c | 1 +
+ drivers/bcma/scan.c | 24 +++++-
+ include/linux/bcma/bcma.h | 4 +
+ include/linux/bcma/bcma_soc.h | 16 ++++
+ 7 files changed, 227 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/bcma/host_soc.c
+ create mode 100644 include/linux/bcma/bcma_soc.h
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -27,6 +27,11 @@ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
+
++config BCMA_HOST_SOC
++ bool
++ depends on BCMA && MIPS
++ default n
++
+ config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -2,6 +2,7 @@ bcma-y += main.o scan.o core.o sprom
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y += driver_pci.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+ obj-$(CONFIG_BCMA) += bcma.o
+
+ ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
+--- /dev/null
++++ b/drivers/bcma/host_soc.c
+@@ -0,0 +1,178 @@
++/*
++ * Broadcom specific AMBA
++ * System on Chip (SoC) Host
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include "scan.h"
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_soc.h>
++
++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
++{
++ return readb(core->io_addr + offset);
++}
++
++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
++{
++ return readw(core->io_addr + offset);
++}
++
++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
++{
++ return readl(core->io_addr + offset);
++}
++
++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
++ u8 value)
++{
++ writeb(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
++ u16 value)
++{
++ writew(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ writel(value, core->io_addr + offset);
++}
++
++#ifdef CONFIG_BCMA_BLOCKIO
++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->io_addr + offset;
++
++ switch (reg_width) {
++ case sizeof(u8): {
++ u8 *buf = buffer;
++
++ while (count) {
++ *buf = __raw_readb(addr);
++ buf++;
++ count--;
++ }
++ break;
++ }
++ case sizeof(u16): {
++ __le16 *buf = buffer;
++
++ WARN_ON(count & 1);
++ while (count) {
++ *buf = (__force __le16)__raw_readw(addr);
++ buf++;
++ count -= 2;
++ }
++ break;
++ }
++ case sizeof(u32): {
++ __le32 *buf = buffer;
++
++ WARN_ON(count & 3);
++ while (count) {
++ *buf = (__force __le32)__raw_readl(addr);
++ buf++;
++ count -= 4;
++ }
++ break;
++ }
++ default:
++ WARN_ON(1);
++ }
++}
++
++static void bcma_host_soc_block_write(struct bcma_device *core,
++ const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->io_addr + offset;
++
++ switch (reg_width) {
++ case sizeof(u8): {
++ const u8 *buf = buffer;
++
++ while (count) {
++ __raw_writeb(*buf, addr);
++ buf++;
++ count--;
++ }
++ break;
++ }
++ case sizeof(u16): {
++ const __le16 *buf = buffer;
++
++ WARN_ON(count & 1);
++ while (count) {
++ __raw_writew((__force u16)(*buf), addr);
++ buf++;
++ count -= 2;
++ }
++ break;
++ }
++ case sizeof(u32): {
++ const __le32 *buf = buffer;
++
++ WARN_ON(count & 3);
++ while (count) {
++ __raw_writel((__force u32)(*buf), addr);
++ buf++;
++ count -= 4;
++ }
++ break;
++ }
++ default:
++ WARN_ON(1);
++ }
++}
++#endif /* CONFIG_BCMA_BLOCKIO */
++
++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
++{
++ return readl(core->io_wrap + offset);
++}
++
++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ writel(value, core->io_wrap + offset);
++}
++
++const struct bcma_host_ops bcma_host_soc_ops = {
++ .read8 = bcma_host_soc_read8,
++ .read16 = bcma_host_soc_read16,
++ .read32 = bcma_host_soc_read32,
++ .write8 = bcma_host_soc_write8,
++ .write16 = bcma_host_soc_write16,
++ .write32 = bcma_host_soc_write32,
++#ifdef CONFIG_BCMA_BLOCKIO
++ .block_read = bcma_host_soc_block_read,
++ .block_write = bcma_host_soc_block_write,
++#endif
++ .aread32 = bcma_host_soc_aread32,
++ .awrite32 = bcma_host_soc_awrite32,
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc)
++{
++ struct bcma_bus *bus = &soc->bus;
++
++ /* iomap only first core. We have to read some register on this core
++ * to scan the bus.
++ */
++ bus->mmio = ioremap(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
++ if (!bus->mmio)
++ return -ENOMEM;
++
++ /* Host specific */
++ bus->hosttype = BCMA_HOSTTYPE_SOC;
++ bus->ops = &bcma_host_soc_ops;
++
++ /* Register */
++ return bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
++}
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -95,6 +95,7 @@ static int bcma_register_cores(struct bc
+ break;
+ case BCMA_HOSTTYPE_NONE:
+ case BCMA_HOSTTYPE_SDIO:
++ case BCMA_HOSTTYPE_SOC:
+ break;
+ }
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -337,6 +337,14 @@ static int bcma_get_next_core(struct bcm
+ }
+ }
+ }
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ core->io_addr = ioremap(core->addr, BCMA_CORE_SIZE);
++ if (!core->io_addr)
++ return -ENOMEM;
++ core->io_wrap = ioremap(core->wrap, BCMA_CORE_SIZE);
++ if (!core->io_wrap)
++ return -ENOMEM;
++ }
+ return 0;
+ }
+
+@@ -369,7 +377,13 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ bcma_init_bus(bus);
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+- eromptr = bus->mmio;
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ eromptr = ioremap(erombase, BCMA_CORE_SIZE);
++ if (!eromptr)
++ return -ENOMEM;
++ } else
++ eromptr = bus->mmio;
++
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+@@ -417,7 +431,13 @@ int __init bcma_bus_scan_early(struct bc
+ int err, core_num = 0;
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+- eromptr = bus->mmio;
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ eromptr = ioremap(erombase, BCMA_CORE_SIZE);
++ if (!eromptr)
++ return -ENOMEM;
++ } else
++ eromptr = bus->mmio;
++
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -17,6 +17,7 @@ enum bcma_hosttype {
+ BCMA_HOSTTYPE_NONE,
+ BCMA_HOSTTYPE_PCI,
+ BCMA_HOSTTYPE_SDIO,
++ BCMA_HOSTTYPE_SOC,
+ };
+
+ struct bcma_chipinfo {
+@@ -133,6 +134,9 @@ struct bcma_device {
+ u32 addr;
+ u32 wrap;
+
++ void __iomem *io_addr;
++ void __iomem *io_wrap;
++
+ void *drvdata;
+ struct list_head list;
+ };
+--- /dev/null
++++ b/include/linux/bcma/bcma_soc.h
+@@ -0,0 +1,16 @@
++#ifndef LINUX_BCMA_SOC_H_
++#define LINUX_BCMA_SOC_H_
++
++#include <linux/bcma/bcma.h>
++
++struct bcma_soc {
++ struct bcma_bus bus;
++ struct bcma_device core_cc;
++ struct bcma_device core_mips;
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc);
++
++int bcma_bus_register(struct bcma_bus *bus);
++
++#endif /* LINUX_BCMA_SOC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch b/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch
new file mode 100644
index 000000000..62cd10290
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch
@@ -0,0 +1,402 @@
+From 0a1a5fd8aab864e7b531ab88fd317ff7278d884d Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:32 +0200
+Subject: [PATCH 05/14] bcma: add mips driver
+
+This adds a mips driver to bcma. This is only found on embedded
+devices. For now the driver just initializes the irqs used on this
+system.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig | 11 ++-
+ drivers/bcma/Makefile | 1 +
+ drivers/bcma/driver_mips.c | 234 +++++++++++++++++++++++++++++++++
+ drivers/bcma/main.c | 19 +++
+ include/linux/bcma/bcma.h | 2 +
+ include/linux/bcma/bcma_driver_mips.h | 49 +++++++
+ 6 files changed, 315 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/bcma/driver_mips.c
+ create mode 100644 include/linux/bcma/bcma_driver_mips.h
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -29,9 +29,18 @@ config BCMA_HOST_PCI
+
+ config BCMA_HOST_SOC
+ bool
+- depends on BCMA && MIPS
++ depends on BCMA_DRIVER_MIPS
+ default n
+
++config BCMA_DRIVER_MIPS
++ bool "BCMA Broadcom MIPS core driver"
++ depends on BCMA && MIPS
++ help
++ Driver for the Broadcom MIPS core attached to Broadcom specific
++ Advanced Microcontroller Bus.
++
++ If unsure, say N
++
+ config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,6 +1,7 @@
+ bcma-y += main.o scan.o core.o sprom.o
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y += driver_pci.o
++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+ obj-$(CONFIG_BCMA) += bcma.o
+--- /dev/null
++++ b/drivers/bcma/driver_mips.c
+@@ -0,0 +1,234 @@
++/*
++ * Broadcom specific AMBA
++ * Broadcom MIPS32 74K core driver
++ *
++ * Copyright 2009, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
++ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/time.h>
++
++/* The 47162a0 hangs when reading its registers */
++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
++{
++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
++ dev->id.id == BCMA_CORE_MIPS_74K;
++}
++
++static inline u32 mips_read32(struct bcma_drv_mips *mcore,
++ u16 offset)
++{
++ return bcma_read32(mcore->core, offset);
++}
++
++static inline void mips_write32(struct bcma_drv_mips *mcore,
++ u16 offset,
++ u32 value)
++{
++ bcma_write32(mcore->core, offset, value);
++}
++
++static const u32 ipsflag_irq_mask[] = {
++ 0,
++ BCMA_MIPS_IPSFLAG_IRQ1,
++ BCMA_MIPS_IPSFLAG_IRQ2,
++ BCMA_MIPS_IPSFLAG_IRQ3,
++ BCMA_MIPS_IPSFLAG_IRQ4,
++};
++
++static const u32 ipsflag_irq_shift[] = {
++ 0,
++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
++};
++
++static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
++{
++ u32 flag;
++
++ if (bcma_core_mips_bcm47162a0_quirk(dev))
++ return dev->core_index;
++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
++
++ return flag & 0x1F;
++}
++
++
++/* Get the MIPS IRQ assignment for a specified device.
++ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ */
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++{
++ struct bcma_device *mdev = dev->bus->drv_mips.core;
++ u32 irqflag;
++ unsigned int irq;
++
++ irqflag = bcma_core_mips_irqflag(dev);
++
++ for (irq = 1; irq <= 4; irq++)
++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
++ (1 << irqflag))
++ return irq;
++
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_mips_irq);
++
++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
++{
++ unsigned int oldirq = bcma_core_mips_irq(dev);
++ struct bcma_bus *bus = dev->bus;
++ struct bcma_device *mdev = bus->drv_mips.core;
++ u32 irqflag;
++
++ irqflag = bcma_core_mips_irqflag(dev);
++ BUG_ON(oldirq == 6);
++
++ dev->irq = irq + 2;
++
++ /* clear the old irq */
++ if (oldirq == 0)
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
++ ~(1 << irqflag));
++ else
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++
++ /* assign the new one */
++ if (irq == 0) {
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
++ (1 << irqflag));
++ } else {
++ u32 oldirqflag = bcma_read32(mdev,
++ BCMA_MIPS_MIPS74K_INTMASK(irq));
++ if (oldirqflag) {
++ struct bcma_device *core;
++
++ /* backplane irq line is in use, find out who uses
++ * it and set user to irq 0
++ */
++ list_for_each_entry_reverse(core, &bus->cores, list) {
++ if ((1 << bcma_core_mips_irqflag(core)) ==
++ oldirqflag) {
++ bcma_core_mips_set_irq(core, 0);
++ break;
++ }
++ }
++ }
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
++ 1 << irqflag);
++ }
++
++ pr_info("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq + 2, irq + 2);
++}
++
++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
++{
++ int i;
++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++ for (i = 0; i <= 6; i++)
++ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
++ printk("\n");
++}
++
++static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry_reverse(core, &bus->cores, list) {
++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
++ }
++}
++
++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ mcore->flash_buswidth = 2;
++ if (bus->drv_cc.core) {
++ mcore->flash_window = 0x1c000000;
++ mcore->flash_window_size = 0x02000000;
++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ case BCMA_CC_FLASHT_ATSER:
++ pr_err("Serial flash not supported.\n");
++ break;
++ case BCMA_CC_FLASHT_PARA:
++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++ BCMA_CC_OTPS) == 0)
++ mcore->flash_buswidth = 1;
++ break;
++ }
++ } else {
++ mcore->flash_window = 0x1fc00000;
++ mcore->flash_window_size = 0x00400000;
++ }
++}
++
++void bcma_core_mips_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus;
++ struct bcma_device *core;
++ bus = mcore->core->bus;
++
++ pr_info("Initializing MIPS core...\n");
++
++ if (!mcore->setup_done)
++ mcore->assigned_irqs = 1;
++
++ /* Assign IRQs to all cores on the bus */
++ list_for_each_entry_reverse(core, &bus->cores, list) {
++ int mips_irq;
++ if (core->irq)
++ continue;
++
++ mips_irq = bcma_core_mips_irq(core);
++ if (mips_irq > 4)
++ core->irq = 0;
++ else
++ core->irq = mips_irq + 2;
++ if (core->irq > 5)
++ continue;
++ switch (core->id.id) {
++ case BCMA_CORE_PCI:
++ case BCMA_CORE_PCIE:
++ case BCMA_CORE_ETHERNET:
++ case BCMA_CORE_ETHERNET_GBIT:
++ case BCMA_CORE_MAC_GBIT:
++ case BCMA_CORE_80211:
++ case BCMA_CORE_USB20_HOST:
++ /* These devices get their own IRQ line if available,
++ * the rest goes on IRQ0
++ */
++ if (mcore->assigned_irqs <= 4)
++ bcma_core_mips_set_irq(core,
++ mcore->assigned_irqs++);
++ break;
++ }
++ }
++ pr_info("IRQ reconfiguration done\n");
++ bcma_core_mips_dump_irq(bus);
++
++ if (mcore->setup_done)
++ return;
++
++ bcma_core_mips_flash_detect(mcore);
++ mcore->setup_done = true;
++}
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -80,6 +80,7 @@ static int bcma_register_cores(struct bc
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
++ case BCMA_CORE_MIPS_74K:
+ continue;
+ }
+
+@@ -141,6 +142,15 @@ int bcma_bus_register(struct bcma_bus *b
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ /* Init MIPS core */
++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ if (core) {
++ bus->drv_mips.core = core;
++ bcma_core_mips_init(&bus->drv_mips);
++ }
++#endif
++
+ /* Init PCIE core */
+ core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ if (core) {
+@@ -208,6 +218,15 @@ int __init bcma_bus_early_register(struc
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ /* Init MIPS core */
++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ if (core) {
++ bus->drv_mips.core = core;
++ bcma_core_mips_init(&bus->drv_mips);
++ }
++#endif
++
+ pr_info("Early bus registered\n");
+
+ return 0;
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -6,6 +6,7 @@
+
+ #include <linux/bcma/bcma_driver_chipcommon.h>
+ #include <linux/bcma/bcma_driver_pci.h>
++#include <linux/bcma/bcma_driver_mips.h>
+ #include <linux/ssb/ssb.h> /* SPROM sharing */
+
+ #include "bcma_regs.h"
+@@ -193,6 +194,7 @@ struct bcma_bus {
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
++ struct bcma_drv_mips drv_mips;
+
+ /* We decided to share SPROM struct with SSB as long as we do not need
+ * any hacks for BCMA. This simplifies drivers code. */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -0,0 +1,49 @@
++#ifndef LINUX_BCMA_DRIVER_MIPS_H_
++#define LINUX_BCMA_DRIVER_MIPS_H_
++
++#define BCMA_MIPS_IPSFLAG 0x0F08
++/* which sbflags get routed to mips interrupt 1 */
++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F
++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0
++/* which sbflags get routed to mips interrupt 2 */
++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00
++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8
++/* which sbflags get routed to mips interrupt 3 */
++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000
++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16
++/* which sbflags get routed to mips interrupt 4 */
++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000
++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24
++
++/* MIPS 74K core registers */
++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000
++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004
++#define BCMA_MIPS_MIPS74K_BIST 0x000C
++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014
++#define BCMA_MIPS_MIPS74K_INTMASK(int) \
++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C
++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040
++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044
++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
++
++#define BCMA_MIPS_OOBSELOUTA30 0x100
++
++struct bcma_device;
++
++struct bcma_drv_mips {
++ struct bcma_device *core;
++ u8 setup_done:1;
++ unsigned int assigned_irqs;
++
++ u8 flash_buswidth;
++ u32 flash_window;
++ u32 flash_window_size;
++};
++
++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
++
++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
new file mode 100644
index 000000000..78724ee69
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
@@ -0,0 +1,151 @@
+From b7c100827012ba588089807475affe0c69a3f817 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:33 +0200
+Subject: [PATCH 06/14] bcma: add serial console support
+
+This adds support for serial console to bcma, when operating on an
+embedded device.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 6 +++
+ drivers/bcma/driver_chipcommon.c | 64 +++++++++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c | 9 +++++
+ include/linux/bcma/bcma_driver_mips.h | 11 ++++++
+ 4 files changed, 90 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -29,6 +29,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+
++/* driver_chipcommon.c */
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++extern int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++ struct bcma_drv_mips_serial_port *ports);
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -92,3 +92,67 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ }
++
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++ struct bcma_drv_mips_serial_port *ports)
++{
++ int nr_ports = 0;
++ u32 plltype;
++ unsigned int irq;
++ u32 baud_base, div;
++ u32 i, n;
++ unsigned int ccrev = cc->core->id.rev;
++
++ plltype = (cc->capabilities & BCMA_CC_CAP_PLLT);
++ irq = bcma_core_mips_irq(cc->core);
++
++ if ((ccrev >= 11) && (ccrev != 15) && (ccrev != 20)) {
++ /* Fixed ALP clock */
++ baud_base = 20000000;
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ /* FIXME: baud_base is different for devices with a PMU */
++ WARN_ON(1);
++ }
++ div = 1;
++ if (ccrev >= 21) {
++ /* Turn off UART clock before switching clocksource. */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ & ~BCMA_CC_CORECTL_UARTCLKEN);
++ }
++ /* Set the override bit so we don't divide it */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ | BCMA_CC_CORECTL_UARTCLK0);
++ if (ccrev >= 21) {
++ /* Re-enable the UART clock. */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ | BCMA_CC_CORECTL_UARTCLKEN);
++ }
++ } else
++ pr_err("serial not supported on this device ccrev: 0x%x\n",
++ ccrev);
++
++ /* Determine the registers of the UARTs */
++ n = (cc->capabilities & BCMA_CC_CAP_NRUART);
++ for (i = 0; i < n; i++) {
++ void __iomem *cc_mmio;
++ void __iomem *uart_regs;
++
++ cc_mmio = cc->core->bus->mmio +
++ (cc->core->core_index * BCMA_CORE_SIZE);
++ uart_regs = cc_mmio + BCMA_CC_UART0_DATA;
++ uart_regs += (i * 256);
++
++ nr_ports++;
++ ports[i].regs = uart_regs;
++ ports[i].irq = irq;
++ ports[i].baud_base = baud_base;
++ ports[i].reg_shift = 0;
++ }
++
++ return nr_ports;
++}
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -157,6 +157,14 @@ static void bcma_core_mips_dump_irq(stru
+ }
+ }
+
++static void bcma_core_mips_serial_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ mcore->nr_serial_ports = bcma_chipco_serial_init(&bus->drv_cc,
++ mcore->serial_ports);
++}
++
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus = mcore->core->bus;
+@@ -229,6 +237,7 @@ void bcma_core_mips_init(struct bcma_drv
+ if (mcore->setup_done)
+ return;
+
++ bcma_core_mips_serial_init(mcore);
+ bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+ }
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -32,11 +32,22 @@
+
+ struct bcma_device;
+
++struct bcma_drv_mips_serial_port {
++ void *regs;
++ unsigned long clockspeed;
++ unsigned int irq;
++ unsigned int baud_base;
++ unsigned int reg_shift;
++};
++
+ struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+ unsigned int assigned_irqs;
+
++ int nr_serial_ports;
++ struct bcma_drv_mips_serial_port serial_ports[4];
++
+ u8 flash_buswidth;
+ u32 flash_window;
+ u32 flash_window_size;
diff --git a/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch b/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch
new file mode 100644
index 000000000..7acdb7430
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch
@@ -0,0 +1,204 @@
+From 257d5fe12600f08df764cac0abc17bef7b6fae9b Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 17:51:30 +0200
+Subject: [PATCH 07/14] bcma: get CPU clock
+
+Add method to return the clock of the CPU. This is needed by the arch
+code to calculate the mips_hpt_frequency.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 3 +
+ drivers/bcma/driver_chipcommon_pmu.c | 87 +++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c | 12 ++++
+ include/linux/bcma/bcma_driver_chipcommon.h | 35 +++++++++++
+ include/linux/bcma/bcma_driver_mips.h | 1 +
+ 5 files changed, 138 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -29,6 +29,9 @@ void bcma_init_bus(struct bcma_bus *bus)
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+
++/* driver_chipcommon_pmu.c */
++extern u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
++
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -11,6 +11,13 @@
+ #include "bcma_private.h"
+ #include <linux/bcma/bcma.h>
+
++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++{
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++}
++
+ static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set)
+ {
+@@ -136,3 +143,83 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_pmu_swreg_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
++
++static u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4716:
++ case 0x4748:
++ case 47162:
++ /* always 20Mhz */
++ return 20000 * 1000;
++ default:
++ pr_warn("No ALP clock specified for %04X device, "
++ "pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
++ }
++ return BCMA_CC_PMU_ALP_CLOCK;
++}
++
++/* Find the output of the "m" pll divider given pll controls that start with
++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
++ */
++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++{
++ u32 tmp, div, ndiv, p1, p2, fc;
++
++ BUG_ON(!m || m > 4);
++
++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
++
++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
++
++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
++ BCMA_CC_PPL_MDIV_MASK;
++
++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
++
++ /* Do calculation in Mhz */
++ fc = bcma_pmu_alp_clock(cc) / 1000000;
++ fc = (p1 * ndiv * fc) / p2;
++
++ /* Return clock in Hertz */
++ return (fc / div) * 1000000;
++}
++
++/* query bus clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4716:
++ case 0x4748:
++ case 47162:
++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ default:
++ pr_warn("No backplane clock specified for %04X device, "
++ "pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
++ }
++ return BCMA_CC_PMU_HT_CLOCK;
++}
++
++/* query cpu clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if ((cc->pmu.rev == 5 || cc->pmu.rev == 6 || cc->pmu.rev == 7) &&
++ (bus->chipinfo.id != 0x4319))
++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_CPU);
++
++ return bcma_pmu_get_clockcontrol(cc);
++}
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -157,6 +157,18 @@ static void bcma_core_mips_dump_irq(stru
+ }
+ }
+
++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
++ return bcma_pmu_get_clockcpu(&bus->drv_cc);
++
++ pr_err("No PMU available, need this to get the cpu clock\n");
++ return 0;
++}
++EXPORT_SYMBOL(bcma_cpu_clock);
++
+ static void bcma_core_mips_serial_init(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus = mcore->core->bus;
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -246,6 +246,41 @@
+ #define BCMA_CC_PLLCTL_DATA 0x0664
+ #define BCMA_CC_SPROM 0x0830 /* SPROM beginning */
+
++/* Divider allocation in 4716/47162/5356 */
++#define BCMA_CC_PMU5_MAINPLL_CPU 1
++#define BCMA_CC_PMU5_MAINPLL_MEM 2
++#define BCMA_CC_PMU5_MAINPLL_SSB 3
++
++/* PLL usage in 4716/47162 */
++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12
++
++/* ALP clock on pre-PMU chips */
++#define BCMA_CC_PMU_ALP_CLOCK 20000000
++/* HT clock for systems with PMU-enabled chipcommon */
++#define BCMA_CC_PMU_HT_CLOCK 80000000
++
++/* PMU rev 5 (& 6) */
++#define BCMA_CC_PPL_P1P2_OFF 0
++#define BCMA_CC_PPL_P1_MASK 0x0f000000
++#define BCMA_CC_PPL_P1_SHIFT 24
++#define BCMA_CC_PPL_P2_MASK 0x00f00000
++#define BCMA_CC_PPL_P2_SHIFT 20
++#define BCMA_CC_PPL_M14_OFF 1
++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff
++#define BCMA_CC_PPL_MDIV_WIDTH 8
++#define BCMA_CC_PPL_NM5_OFF 2
++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000
++#define BCMA_CC_PPL_NDIV_SHIFT 20
++#define BCMA_CC_PPL_FMAB_OFF 3
++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000
++#define BCMA_CC_PPL_MRAT_SHIFT 28
++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000
++#define BCMA_CC_PPL_ABRAT_SHIFT 27
++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff
++#define BCMA_CC_PPL_PLLCTL_OFF 4
++#define BCMA_CC_PPL_PCHI_OFF 5
++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -54,6 +54,7 @@ struct bcma_drv_mips {
+ };
+
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+ extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+
diff --git a/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch b/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch
new file mode 100644
index 000000000..48c18bb0b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0008-bcma-add-pci-e-host-mode.patch
@@ -0,0 +1,140 @@
+From f93062e72447b4a4a51afbe33ea086ce8c922587 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 17:52:09 +0200
+Subject: [PATCH 08/14] bcma: add pci(e) host mode
+
+This adds some stub for a pci(e) host controller. This controller is
+found on some embedded devices to attach other chips.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig | 6 ++++
+ drivers/bcma/Makefile | 1 +
+ drivers/bcma/bcma_private.h | 6 ++++
+ drivers/bcma/driver_pci.c | 14 ++++++++++-
+ drivers/bcma/driver_pci_host.c | 43 ++++++++++++++++++++++++++++++++++
+ include/linux/bcma/bcma_driver_pci.h | 1 +
+ 6 files changed, 70 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/bcma/driver_pci_host.c
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -32,6 +32,12 @@ config BCMA_HOST_SOC
+ depends on BCMA_DRIVER_MIPS
+ default n
+
++config BCMA_DRIVER_PCI_HOSTMODE
++ bool "Hostmode support for BCMA PCI core"
++ depends on BCMA_DRIVER_MIPS
++ help
++ PCIcore hostmode operation (external PCI bus).
++
+ config BCMA_DRIVER_MIPS
+ bool "BCMA Broadcom MIPS core driver"
+ depends on BCMA && MIPS
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,6 +1,7 @@
+ bcma-y += main.o scan.o core.o sprom.o
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+ bcma-y += driver_pci.o
++bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -38,6 +38,12 @@ extern int bcma_chipco_serial_init(struc
+ struct bcma_drv_mips_serial_port *ports);
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++/* driver_pci_host.c */
++int bcma_core_pci_in_hostmode(struct bcma_drv_pci *pc);
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -159,9 +159,21 @@ static void bcma_pcicore_serdes_workarou
+
+ void bcma_core_pci_init(struct bcma_drv_pci *pc)
+ {
++ struct bcma_device *core = pc->core;
++
+ if (pc->setup_done)
+ return;
+- bcma_pcicore_serdes_workaround(pc);
++
++ if (!bcma_core_is_enabled(core))
++ bcma_core_enable(core, 0);
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++ pc->hostmode = bcma_core_pci_in_hostmode(pc);
++ if (pc->hostmode)
++ bcma_core_pci_hostmode_init(pc);
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++ if (!pc->hostmode)
++ bcma_pcicore_serdes_workaround(pc);
++
+ pc->setup_done = true;
+ }
+
+--- /dev/null
++++ b/drivers/bcma/driver_pci_host.c
+@@ -0,0 +1,43 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Host mode
++ *
++ * Copyright 2005, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++#include <asm/paccess.h>
++/* Probe a 32bit value on the bus and catch bus exceptions.
++ * Returns nonzero on a bus exception.
++ * This is MIPS specific */
++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
++
++
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++{
++ /* TODO: implement PCI host mode */
++}
++
++int bcma_core_pci_in_hostmode(struct bcma_drv_pci *pc)
++{
++ struct bcma_bus *bus = pc->core->bus;
++ u16 chipid_top;
++ u32 tmp;
++
++ chipid_top = (bus->chipinfo.id & 0xFF00);
++ if (chipid_top != 0x4700 &&
++ chipid_top != 0x5300)
++ return 0;
++
++/* TODO: add when sprom is available
++ * if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
++ * return 0;
++ */
++
++ return !mips_busprobe32(tmp, (bus->mmio + (pc->core->core_index *
++ BCMA_CORE_SIZE)));
++}
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -78,6 +78,7 @@ struct pci_dev;
+ struct bcma_drv_pci {
+ struct bcma_device *core;
+ u8 setup_done:1;
++ u8 hostmode:1;
+ };
+
+ /* Register access */
diff --git a/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch b/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch
new file mode 100644
index 000000000..931b6e3d0
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0009-bcma-add-check-if-sprom-is-available-before-accessin.patch
@@ -0,0 +1,37 @@
+From 5972feafaa3c71c1497b4ef4101b3c6855b7b64e Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 19 Jun 2011 19:14:11 +0200
+Subject: [PATCH 09/14] bcma: add check if sprom is available before accessing it.
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/main.c | 4 +++-
+ drivers/bcma/sprom.c | 3 +++
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -160,7 +160,9 @@ int bcma_bus_register(struct bcma_bus *b
+
+ /* Try to get SPROM */
+ err = bcma_sprom_get(bus);
+- if (err) {
++ if (err == -ENOENT) {
++ pr_err("No SPROM available\n");
++ } else if (err) {
+ pr_err("Failed to get SPROM: %d\n", err);
+ return -ENOENT;
+ }
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -143,6 +143,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+
++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
++ return -ENOENT;
++
+ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+ GFP_KERNEL);
+ if (!sprom)
diff --git a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch
new file mode 100644
index 000000000..4363a5bd9
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-prepare-to-support-different-buses.patch
@@ -0,0 +1,439 @@
+From c0886db6357de20fba4f7c0602eceefba3ad343b Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:36 +0200
+Subject: [PATCH 10/14] bcm47xx: prepare to support different buses
+
+The ssb bus is not hod directly any more. there is now a union which
+contains all the supported buses, now just ssb. As just one system bus
+can be used at a time the union does not cause any problems.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/gpio.c | 56 ++++++++++++++++----------
+ arch/mips/bcm47xx/nvram.c | 15 +++++--
+ arch/mips/bcm47xx/serial.c | 13 +++++-
+ arch/mips/bcm47xx/setup.c | 32 +++++++++++---
+ arch/mips/bcm47xx/time.c | 9 +++-
+ arch/mips/bcm47xx/wgt634u.c | 13 ++++--
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 14 ++++++-
+ arch/mips/include/asm/mach-bcm47xx/gpio.h | 55 ++++++++++++++++++-------
+ drivers/watchdog/bcm47xx_wdt.c | 12 +++++-
+ 9 files changed, 158 insertions(+), 61 deletions(-)
+
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
+
+ int gpio_request(unsigned gpio, const char *tag)
+ {
+- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+- return -EINVAL;
+-
+- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+- return -EINVAL;
+-
+- if (test_and_set_bit(gpio, gpio_in_use))
+- return -EBUSY;
+-
+- return 0;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
++ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
++ return -EINVAL;
++
++ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
++ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++ return -EINVAL;
++
++ if (test_and_set_bit(gpio, gpio_in_use))
++ return -EBUSY;
++
++ return 0;
++ }
++ return -EINVAL;
+ }
+ EXPORT_SYMBOL(gpio_request);
+
+ void gpio_free(unsigned gpio)
+ {
+- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+- return;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
++ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
++ return;
++
++ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
++ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++ return;
+
+- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
++ clear_bit(gpio, gpio_in_use);
+ return;
+-
+- clear_bit(gpio, gpio_in_use);
++ }
+ }
+ EXPORT_SYMBOL(gpio_free);
+
+ int gpio_to_irq(unsigned gpio)
+ {
+- if (ssb_chipco_available(&ssb_bcm47xx.chipco))
+- return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
+- else if (ssb_extif_available(&ssb_bcm47xx.extif))
+- return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
+- else
+- return -EINVAL;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
++ return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
++ else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
++ return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
++ else
++ return -EINVAL;
++ }
++ return -EINVAL;
+ }
+ EXPORT_SYMBOL_GPL(gpio_to_irq);
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE];
+ /* Probe for NVRAM header */
+ static void early_nvram_init(void)
+ {
+- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++ struct ssb_mipscore *mcore_ssb;
+ struct nvram_header *header;
+ int i;
+- u32 base, lim, off;
++ u32 base = 0;
++ u32 lim = 0;
++ u32 off;
+ u32 *src, *dst;
+
+- base = mcore->flash_window;
+- lim = mcore->flash_window_size;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ mcore_ssb = &bcm47xx_bus.ssb.mipscore;
++ base = mcore_ssb->flash_window;
++ lim = mcore_ssb->flash_window_size;
++ break;
++ }
+
+ off = FLASH_MIN;
+ while (off <= lim) {
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -23,10 +23,10 @@ static struct platform_device uart8250_d
+ },
+ };
+
+-static int __init uart8250_init(void)
++static int __init uart8250_init_ssb(void)
+ {
+ int i;
+- struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
++ struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
+
+ memset(&uart8250_data, 0, sizeof(uart8250_data));
+
+@@ -45,6 +45,15 @@ static int __init uart8250_init(void)
+ return platform_device_register(&uart8250_device);
+ }
+
++static int __init uart8250_init(void)
++{
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ return uart8250_init_ssb();
++ }
++ return -EINVAL;
++}
++
+ module_init(uart8250_init);
+
+ MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -35,15 +35,22 @@
+ #include <bcm47xx.h>
+ #include <asm/mach-bcm47xx/nvram.h>
+
+-struct ssb_bus ssb_bcm47xx;
+-EXPORT_SYMBOL(ssb_bcm47xx);
++union bcm47xx_bus bcm47xx_bus;
++EXPORT_SYMBOL(bcm47xx_bus);
++
++enum bcm47xx_bus_type bcm47xx_active_bus_type;
++EXPORT_SYMBOL(bcm47xx_active_bus_type);
+
+ static void bcm47xx_machine_restart(char *command)
+ {
+ printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+ local_irq_disable();
+ /* Set the watchdog timer to reset immediately */
+- ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
++ break;
++ }
+ while (1)
+ cpu_relax();
+ }
+@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void)
+ {
+ /* Disable interrupts and watchdog and spin forever */
+ local_irq_disable();
+- ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++ break;
++ }
+ while (1)
+ cpu_relax();
+ }
+@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct
+ return 0;
+ }
+
+-void __init plat_mem_setup(void)
++static void __init bcm47xx_register_ssb(void)
+ {
+ int err;
+ char buf[100];
+@@ -258,12 +269,12 @@ void __init plat_mem_setup(void)
+ printk(KERN_WARNING "bcm47xx: someone else already registered"
+ " a ssb SPROM callback handler (err %d)\n", err);
+
+- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
++ err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
+ bcm47xx_get_invariants);
+ if (err)
+ panic("Failed to initialize SSB bus (err %d)\n", err);
+
+- mcore = &ssb_bcm47xx.mipscore;
++ mcore = &bcm47xx_bus.ssb.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+@@ -276,6 +287,14 @@ void __init plat_mem_setup(void)
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
++}
++
++void __init plat_mem_setup(void)
++{
++ struct cpuinfo_mips *c = &current_cpu_data;
++
++ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
++ bcm47xx_register_ssb();
+
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -30,7 +30,7 @@
+
+ void __init plat_time_init(void)
+ {
+- unsigned long hz;
++ unsigned long hz = 0;
+
+ /*
+ * Use deterministic values for initial counter interrupt
+@@ -39,7 +39,12 @@ void __init plat_time_init(void)
+ write_c0_count(0);
+ write_c0_compare(0xffff);
+
+- hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
++ break;
++ }
++
+ if (!hz)
+ hz = 100000000;
+
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int ir
+
+ /* Interrupts are shared, check if the current one is
+ a GPIO interrupt. */
+- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
++ if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
+ SSB_CHIPCO_IRQ_GPIO))
+ return IRQ_NONE;
+
+@@ -133,21 +133,24 @@ static int __init wgt634u_init(void)
+ * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+ */
+
+- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
++ if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB)
++ return -ENODEV;
++
++ u8 *et0mac = bcm47xx_bus.ssb.sprom.et0mac;
+
+ if (et0mac[0] == 0x00 &&
+ ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+ (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+
+ printk(KERN_INFO "WGT634U machine detected.\n");
+
+ if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+ gpio_interrupt, IRQF_SHARED,
+- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
++ "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+ gpio_direction_input(WGT634U_GPIO_RESET);
+ gpio_intmask(WGT634U_GPIO_RESET, 1);
+- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
++ ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
+ SSB_CHIPCO_IRQ_GPIO,
+ SSB_CHIPCO_IRQ_GPIO);
+ }
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -19,7 +19,17 @@
+ #ifndef __ASM_BCM47XX_H
+ #define __ASM_BCM47XX_H
+
+-/* SSB bus */
+-extern struct ssb_bus ssb_bcm47xx;
++#include <linux/ssb/ssb.h>
++
++enum bcm47xx_bus_type {
++ BCM47XX_BUS_TYPE_SSB,
++};
++
++union bcm47xx_bus {
++ struct ssb_bus ssb;
++};
++
++extern union bcm47xx_bus bcm47xx_bus;
++extern enum bcm47xx_bus_type bcm47xx_active_bus_type;
+
+ #endif /* __ASM_BCM47XX_H */
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio);
+
+ static inline int gpio_get_value(unsigned gpio)
+ {
+- return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
++ }
++ return -EINVAL;
+ }
+
+ static inline void gpio_set_value(unsigned gpio, int value)
+ {
+- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
++ value ? 1 << gpio : 0);
++ }
+ }
+
+ static inline int gpio_direction_input(unsigned gpio)
+ {
+- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
+- return 0;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
++ return 0;
++ }
++ return -EINVAL;
+ }
+
+ static inline int gpio_direction_output(unsigned gpio, int value)
+ {
+- /* first set the gpio out value */
+- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+- /* then set the gpio mode */
+- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
+- return 0;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ /* first set the gpio out value */
++ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
++ value ? 1 << gpio : 0);
++ /* then set the gpio mode */
++ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
++ return 0;
++ }
++ return -EINVAL;
+ }
+
+ static inline int gpio_intmask(unsigned gpio, int value)
+ {
+- ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return 0;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
++ value ? 1 << gpio : 0);
++ return 0;
++ }
++ return -EINVAL;
+ }
+
+ static inline int gpio_polarity(unsigned gpio, int value)
+ {
+- ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return 0;
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
++ value ? 1 << gpio : 0);
++ return 0;
++ }
++ return -EINVAL;
+ }
+
+
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -54,12 +54,20 @@ static atomic_t ticks;
+ static inline void bcm47xx_wdt_hw_start(void)
+ {
+ /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
++ break;
++ }
+ }
+
+ static inline int bcm47xx_wdt_hw_stop(void)
+ {
+- return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
++ switch (bcm47xx_active_bus_type) {
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++ }
++ return -EINVAL;
+ }
+
+ static void bcm47xx_timer_tick(unsigned long unused)
diff --git a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
new file mode 100644
index 000000000..cfb19e065
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
@@ -0,0 +1,395 @@
+From 82d03f33ba3e41511e56bd6ae5ae93b3b1bd0b63 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 22 Jun 2011 22:16:35 +0200
+Subject: [PATCH 11/14] bcm47xx: make it possible to build bcm47xx without ssb.
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig | 8 +-------
+ arch/mips/bcm47xx/Kconfig | 18 ++++++++++++++++++
+ arch/mips/bcm47xx/Makefile | 3 ++-
+ arch/mips/bcm47xx/gpio.c | 6 ++++++
+ arch/mips/bcm47xx/nvram.c | 4 ++++
+ arch/mips/bcm47xx/serial.c | 4 ++++
+ arch/mips/bcm47xx/setup.c | 8 ++++++++
+ arch/mips/bcm47xx/time.c | 2 ++
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++++
+ arch/mips/include/asm/mach-bcm47xx/gpio.h | 12 ++++++++++++
+ arch/mips/pci/pci-bcm47xx.c | 6 ++++++
+ drivers/watchdog/bcm47xx_wdt.c | 4 ++++
+ 12 files changed, 71 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm47xx/Kconfig
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -91,15 +91,8 @@ config BCM47XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+- select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+- select SSB
+- select SSB_DRIVER_MIPS
+- select SSB_DRIVER_EXTIF
+- select SSB_EMBEDDED
+- select SSB_B43_PCI_BRIDGE if PCI
+- select SSB_PCICORE_HOSTMODE if PCI
+ select GENERIC_GPIO
+ select SYS_HAS_EARLY_PRINTK
+ select CFE
+@@ -785,6 +778,7 @@ endchoice
+
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/ath79/Kconfig"
++source "arch/mips/bcm47xx/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/jz4740/Kconfig"
+--- /dev/null
++++ b/arch/mips/bcm47xx/Kconfig
+@@ -0,0 +1,18 @@
++if BCM47XX
++
++config BCM47XX_SSB
++ bool "SSB Support for Broadcom BCM47XX"
++ select SYS_HAS_CPU_MIPS32_R1
++ select SSB
++ select SSB_DRIVER_MIPS
++ select SSB_DRIVER_EXTIF
++ select SSB_EMBEDDED
++ select SSB_B43_PCI_BRIDGE if PCI
++ select SSB_PCICORE_HOSTMODE if PCI
++ default y
++ help
++ Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support bus.
++
++ This will generate an image with support for SSB and MIPS32 R2 instruction set.
++
++endif
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,5 @@
+ # under Linux.
+ #
+
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
+ int gpio_request(unsigned gpio, const char *tag)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const ch
+ return -EBUSY;
+
+ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request);
+ void gpio_free(unsigned gpio)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio)
+
+ clear_bit(gpio, gpio_in_use);
+ return;
++#endif
+ }
+ }
+ EXPORT_SYMBOL(gpio_free);
+@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free);
+ int gpio_to_irq(unsigned gpio)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
+ return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
+@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio)
+ return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
+ else
+ return -EINVAL;
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE];
+ /* Probe for NVRAM header */
+ static void early_nvram_init(void)
+ {
++#ifdef CONFIG_BCM47XX_SSB
+ struct ssb_mipscore *mcore_ssb;
++#endif
+ struct nvram_header *header;
+ int i;
+ u32 base = 0;
+@@ -35,11 +37,13 @@ static void early_nvram_init(void)
+ u32 *src, *dst;
+
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+ base = mcore_ssb->flash_window;
+ lim = mcore_ssb->flash_window_size;
+ break;
++#endif
+ }
+
+ off = FLASH_MIN;
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -23,6 +23,7 @@ static struct platform_device uart8250_d
+ },
+ };
+
++#ifdef CONFIG_BCM47XX_SSB
+ static int __init uart8250_init_ssb(void)
+ {
+ int i;
+@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void
+ }
+ return platform_device_register(&uart8250_device);
+ }
++#endif
+
+ static int __init uart8250_init(void)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return uart8250_init_ssb();
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char
+ local_irq_disable();
+ /* Set the watchdog timer to reset immediately */
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ break;
++#endif
+ }
+ while (1)
+ cpu_relax();
+@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void)
+ /* Disable interrupts and watchdog and spin forever */
+ local_irq_disable();
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ break;
++#endif
+ }
+ while (1)
+ cpu_relax();
+ }
+
++#ifdef CONFIG_BCM47XX_SSB
+ #define READ_FROM_NVRAM(_outvar, name, buf) \
+ if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb(
+ }
+ }
+ }
++#endif
+
+ void __init plat_mem_setup(void)
+ {
+ struct cpuinfo_mips *c = &current_cpu_data;
+
++#ifdef CONFIG_BCM47XX_SSB
+ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_register_ssb();
++#endif
+
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -40,9 +40,11 @@ void __init plat_time_init(void)
+ write_c0_compare(0xffff);
+
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ break;
++#endif
+ }
+
+ if (!hz)
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -22,11 +22,15 @@
+ #include <linux/ssb/ssb.h>
+
+ enum bcm47xx_bus_type {
++#ifdef CONFIG_BCM47XX_SSB
+ BCM47XX_BUS_TYPE_SSB,
++#endif
+ };
+
+ union bcm47xx_bus {
++#ifdef CONFIG_BCM47XX_SSB
+ struct ssb_bus ssb;
++#endif
+ };
+
+ extern union bcm47xx_bus bcm47xx_bus;
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio);
+ static inline int gpio_get_value(unsigned gpio)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigne
+ static inline void gpio_set_value(unsigned gpio, int value)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
++#endif
+ }
+ }
+
+ static inline int gpio_direction_input(unsigned gpio)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -50,6 +56,7 @@ static inline int gpio_direction_input(u
+ static inline int gpio_direction_output(unsigned gpio, int value)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ /* first set the gpio out value */
+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+@@ -57,6 +64,7 @@ static inline int gpio_direction_output(
+ /* then set the gpio mode */
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -64,10 +72,12 @@ static inline int gpio_direction_output(
+ static inline int gpio_intmask(unsigned gpio, int value)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned
+ static inline int gpio_polarity(unsigned gpio, int value)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
+ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/arch/mips/pci/pci-bcm47xx.c
++++ b/arch/mips/pci/pci-bcm47xx.c
+@@ -25,6 +25,7 @@
+ #include <linux/types.h>
+ #include <linux/pci.h>
+ #include <linux/ssb/ssb.h>
++#include <bcm47xx.h>
+
+ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ {
+@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct
+
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
++#ifdef CONFIG_BCM47XX_SSB
+ int res;
+ u8 slot, pin;
+
++ if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB)
++ return 0;
++
+ res = ssb_pcibios_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev
+ }
+
+ dev->irq = res;
++#endif
+ return 0;
+ }
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start(
+ {
+ /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ break;
++#endif
+ }
+ }
+
+ static inline int bcm47xx_wdt_hw_stop(void)
+ {
+ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
++#endif
+ }
+ return -EINVAL;
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch
new file mode 100644
index 000000000..a800f4d68
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0012-bcm47xx-add-support-for-bcma-bus.patch
@@ -0,0 +1,410 @@
+From 0b7b4817579b5b283e48b96de24b7b2c1a861644 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:37 +0200
+Subject: [PATCH 12/14] bcm47xx: add support for bcma bus
+
+This patch add support for the bcma bus. Broadcom uses only Mips 74K
+CPUs on the new SoC and on the old ons using ssb bus there are no Mips
+74K CPUs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/Kconfig | 13 ++++++
+ arch/mips/bcm47xx/gpio.c | 22 +++++++++++
+ arch/mips/bcm47xx/nvram.c | 10 +++++
+ arch/mips/bcm47xx/serial.c | 29 ++++++++++++++
+ arch/mips/bcm47xx/setup.c | 53 +++++++++++++++++++++++++-
+ arch/mips/bcm47xx/time.c | 5 ++
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 8 ++++
+ arch/mips/include/asm/mach-bcm47xx/gpio.h | 41 ++++++++++++++++++++
+ drivers/watchdog/bcm47xx_wdt.c | 11 +++++
+ 9 files changed, 190 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm47xx/Kconfig
++++ b/arch/mips/bcm47xx/Kconfig
+@@ -15,4 +15,17 @@ config BCM47XX_SSB
+
+ This will generate an image with support for SSB and MIPS32 R2 instruction set.
+
++config BCM47XX_BCMA
++ bool "SSB Support for Broadcom BCM47XX"
++ select SYS_HAS_CPU_MIPS32_R2
++ select BCMA
++ select BCMA_HOST_SOC
++ select BCMA_DRIVER_MIPS
++ select BCMA_DRIVER_PCI_HOSTMODE if PCI
++ default y
++ help
++ Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
++
++ This will generate an image with support for BCMA and MIPS32 R2 instruction set.
++
+ endif
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const ch
+
+ return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)
++ return -EINVAL;
++
++ if (test_and_set_bit(gpio, gpio_in_use))
++ return -EBUSY;
++
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio)
+ clear_bit(gpio, gpio_in_use);
+ return;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)
++ return;
++
++ clear_bit(gpio, gpio_in_use);
++ return;
++#endif
+ }
+ }
+ EXPORT_SYMBOL(gpio_free);
+@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio)
+ else
+ return -EINVAL;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -29,6 +29,9 @@ static void early_nvram_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+ struct ssb_mipscore *mcore_ssb;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ struct bcma_drv_mips *mcore_bcma;
++#endif
+ struct nvram_header *header;
+ int i;
+ u32 base = 0;
+@@ -44,6 +47,13 @@ static void early_nvram_init(void)
+ lim = mcore_ssb->flash_window_size;
+ break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ mcore_bcma = &bcm47xx_bus.bcma.bus.drv_mips;
++ base = mcore_bcma->flash_window;
++ lim = mcore_bcma->flash_window_size;
++ break;
++#endif
+ }
+
+ off = FLASH_MIN;
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void
+ }
+ #endif
+
++#ifdef CONFIG_BCM47XX_BCMA
++static int __init uart8250_init_bcma(void)
++{
++ int i;
++ struct bcma_drv_mips *mcore = &(bcm47xx_bus.bcma.bus.drv_mips);
++
++ memset(&uart8250_data, 0, sizeof(uart8250_data));
++
++ for (i = 0; i < mcore->nr_serial_ports; i++) {
++ struct plat_serial8250_port *p = &(uart8250_data[i]);
++ struct bcma_drv_mips_serial_port *bcma_port;
++ bcma_port = &(mcore->serial_ports[i]);
++
++ p->mapbase = (unsigned int) bcma_port->regs;
++ p->membase = (void *) bcma_port->regs;
++ p->irq = bcma_port->irq + 2;
++ p->uartclk = bcma_port->baud_base;
++ p->regshift = bcma_port->reg_shift;
++ p->iotype = UPIO_MEM;
++ p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++ }
++ return platform_device_register(&uart8250_device);
++}
++#endif
++
+ static int __init uart8250_init(void)
+ {
+ switch (bcm47xx_active_bus_type) {
+@@ -54,6 +79,10 @@ static int __init uart8250_init(void)
+ case BCM47XX_BUS_TYPE_SSB:
+ return uart8250_init_ssb();
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return uart8250_init_bcma();
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -29,6 +29,7 @@
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma_soc.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
++ break;
++#endif
+ }
+ while (1)
+ cpu_relax();
+@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void)
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
++ break;
++#endif
+ }
+ while (1)
+ cpu_relax();
+@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb(
+ }
+ #endif
+
++#ifdef CONFIG_BCM47XX_BCMA
++static void __init bcm47xx_register_bcma(void)
++{
++ int err;
++
++ err = bcma_host_soc_register(&bcm47xx_bus.bcma);
++ if (err)
++ panic("Failed to initialize BCMA bus (err %d)\n", err);
++}
++#endif
++
+ void __init plat_mem_setup(void)
+ {
+ struct cpuinfo_mips *c = &current_cpu_data;
+
++ if (c->cputype == CPU_74K) {
++ printk(KERN_INFO "bcm47xx: using bcma bus\n");
++#ifdef CONFIG_BCM47XX_BCMA
++ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_BCMA;
++ bcm47xx_register_bcma();
++#endif
++ } else {
++ printk(KERN_INFO "bcm47xx: using ssb bus\n");
+ #ifdef CONFIG_BCM47XX_SSB
+- bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
+- bcm47xx_register_ssb();
++ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
++ bcm47xx_register_ssb();
+ #endif
++ }
+
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
+ }
++
++static int __init bcm47xx_register_bus_complete(void)
++{
++ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ /* Nothing to do */
++ break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_bus_register(&bcm47xx_bus.bcma.bus);
++ break;
++#endif
++ }
++ return 0;
++}
++device_initcall(bcm47xx_register_bus_complete);
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -45,6 +45,11 @@ void __init plat_time_init(void)
+ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
++ break;
++#endif
+ }
+
+ if (!hz)
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -20,17 +20,25 @@
+ #define __ASM_BCM47XX_H
+
+ #include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_soc.h>
+
+ enum bcm47xx_bus_type {
+ #ifdef CONFIG_BCM47XX_SSB
+ BCM47XX_BUS_TYPE_SSB,
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ BCM47XX_BUS_TYPE_BCMA,
++#endif
+ };
+
+ union bcm47xx_bus {
+ #ifdef CONFIG_BCM47XX_SSB
+ struct ssb_bus ssb;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ struct bcma_soc bcma;
++#endif
+ };
+
+ extern union bcm47xx_bus bcm47xx_bus;
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -10,6 +10,7 @@
+ #define __BCM47XX_GPIO_H
+
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+
+ #define BCM47XX_EXTIF_GPIO_LINES 5
+@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigne
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
++ 1 << gpio);
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsign
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+ value ? 1 << gpio : 0);
++ return;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++ value ? 1 << gpio : 0);
++ return;
+ #endif
+ }
+ }
+@@ -49,6 +62,12 @@ static inline int gpio_direction_input(u
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+ return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++ 0);
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -65,6 +84,16 @@ static inline int gpio_direction_output(
+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+ return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ /* first set the gpio out value */
++ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++ value ? 1 << gpio : 0);
++ /* then set the gpio mode */
++ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
++ 1 << gpio);
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned
+ value ? 1 << gpio : 0);
+ return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
++ 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned
+ value ? 1 << gpio : 0);
+ return 0;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
++ 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start(
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ break;
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
++ 0xfffffff);
++ break;
++#endif
+ }
+ }
+
+@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ #endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
++ return 0;
++#endif
+ }
+ return -EINVAL;
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
new file mode 100644
index 000000000..a40e72695
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0013-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
@@ -0,0 +1,37 @@
+From 360eb82fd303ac24590a1b99ad1866162f6b0171 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:38 +0200
+Subject: [PATCH 13/14] bcm47xx: fix irq assignment for new SoCs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/irq.c | 12 ++++++++++++
+ 1 files changed, 12 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm47xx/irq.c
++++ b/arch/mips/bcm47xx/irq.c
+@@ -26,6 +26,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+ #include <asm/irq_cpu.h>
++#include <bcm47xx.h>
+
+ void plat_irq_dispatch(void)
+ {
+@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
+
+ void __init arch_init_irq(void)
+ {
++#ifdef CONFIG_BCM47XX_BCMA
++ if (bcm47xx_active_bus_type == BCM47XX_BUS_TYPE_BCMA) {
++ bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
++ BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
++ /*
++ * the kernel reads the timer irq from some register and thinks
++ * it's #5, but we offset it by 2 and route to #7
++ */
++ cp0_compare_irq = 7;
++ }
++#endif
+ mips_cpu_irq_init();
+ }
diff --git a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
index 419a4f6f1..824dd09c0 100644
--- a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
+++ b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
@@ -15,16 +15,16 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
-@@ -29,6 +29,8 @@
- #include <linux/types.h>
+@@ -30,6 +30,8 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
-@@ -247,6 +249,31 @@ static int bcm47xx_get_invariants(struct
+@@ -274,6 +276,31 @@ static int bcm47xx_get_invariants(struct
return 0;
}
@@ -53,17 +53,17 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+}
+#endif
+
- void __init plat_mem_setup(void)
+ static void __init bcm47xx_register_ssb(void)
{
int err;
-@@ -277,6 +304,10 @@ void __init plat_mem_setup(void)
+@@ -303,6 +330,10 @@ static void __init bcm47xx_register_ssb(
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
-
++
+#ifdef CONFIG_SERIAL_8250
+ bcm47xx_early_serial_setup(mcore);
+#endif
-+
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
+ }
+ #endif
+
diff --git a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
index 2b34ec5c0..69d4eefa8 100644
--- a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
+++ b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
@@ -16,9 +16,9 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -101,7 +101,6 @@ config BCM47XX
- select SSB_B43_PCI_BRIDGE if PCI
- select SSB_PCICORE_HOSTMODE if PCI
+@@ -94,7 +94,6 @@ config BCM47XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
select CFE
diff --git a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
index 32593908d..2bc7718c3 100644
--- a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
+++ b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
@@ -1,7 +1,7 @@
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -58,6 +58,10 @@ static inline int gpio_polarity(unsigned
- return 0;
+@@ -136,6 +136,10 @@ static inline int gpio_polarity(unsigned
+ return -EINVAL;
}
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
diff --git a/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch b/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch
new file mode 100644
index 000000000..2b2f01106
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/250-bcma-flash.patch
@@ -0,0 +1,78 @@
+--- a/drivers/mtd/maps/bcm47xx-flash.c
++++ b/drivers/mtd/maps/bcm47xx-flash.c
+@@ -46,11 +46,9 @@
+ #include <linux/mtd/map.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/crc32.h>
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
+ #include <asm/io.h>
+ #include <asm/mach-bcm47xx/nvram.h>
++#include <asm/mach-bcm47xx/bcm47xx.h>
+ #include <asm/fw/cfe/cfe_api.h>
+
+
+@@ -90,9 +88,6 @@ struct trx_header {
+ #define ROUTER_NETGEAR_WNR3500L 4
+ #define ROUTER_SIMPLETECH_SIMPLESHARE 5
+
+-#ifdef CONFIG_SSB
+-extern struct ssb_bus ssb_bcm47xx;
+-#endif
+ static struct mtd_info *bcm47xx_mtd;
+
+ static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+@@ -552,27 +547,42 @@ init_mtd_partitions(struct mtd_info *mtd
+
+ int __init init_bcm47xx_map(void)
+ {
+-#ifdef CONFIG_SSB
+- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++#ifdef CONFIG_BCM47XX_SSB
++ struct ssb_mipscore *mcore_ssb;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ struct bcma_drv_mips *mcore_bcma;
+ #endif
+ size_t size;
+ int ret = 0;
++ u32 window = 0;
++ u32 window_size = 0;
+ struct mtd_partition *parts;
+ int i;
+
+-#ifdef CONFIG_SSB
+- u32 window = mcore->flash_window;
+- u32 window_size = mcore->flash_window_size;
++ switch (bcm47xx_active_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ mcore_ssb = &bcm47xx_bus.ssb.mipscore;
++ window = mcore_ssb->flash_window;
++ window_size = mcore_ssb->flash_window_size;
++ bcm47xx_map.bankwidth = mcore_ssb->flash_buswidth;
++ break;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ mcore_bcma = &bcm47xx_bus.bcma.bus.drv_mips;
++ window = mcore_bcma->flash_window;
++ window_size = mcore_bcma->flash_window_size;
++ bcm47xx_map.bankwidth = mcore_bcma->flash_buswidth;
++ break;
++#endif
++ }
+
+ printk("flash init: 0x%08x 0x%08x\n", window, window_size);
+ bcm47xx_map.phys = window;
+ bcm47xx_map.size = window_size;
+- bcm47xx_map.bankwidth = mcore->flash_buswidth;
+ bcm47xx_map.virt = ioremap_nocache(window, window_size);
+-#else
+- printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+- bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+-#endif
+
+ if (!bcm47xx_map.virt) {
+ printk("Failed to ioremap\n");
diff --git a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
index 14b408842..8e5e88b6b 100644
--- a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
+++ b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
-@@ -93,3 +93,30 @@ int nvram_getenv(char *name, char *val,
+@@ -114,3 +114,30 @@ int nvram_getenv(char *name, char *val,
return NVRAM_ERR_ENVNOTFOUND;
}
EXPORT_SYMBOL(nvram_getenv);
@@ -33,10 +33,10 @@
+EXPORT_SYMBOL(nvram_get);
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
-@@ -312,3 +312,20 @@ void __init plat_mem_setup(void)
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
+@@ -388,3 +388,20 @@ static int __init bcm47xx_register_bus_c
+ return 0;
}
+ device_initcall(bcm47xx_register_bus_complete);
+
+static int __init bcm47xx_register_gpiodev(void)
+{
diff --git a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
index a0331399d..a1a9055e7 100644
--- a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
+++ b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
@@ -1,14 +1,13 @@
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
+@@ -4,4 +4,3 @@
#
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+ obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
-@@ -1,166 +0,0 @@
+@@ -1,169 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
@@ -119,7 +118,7 @@
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
-- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
@@ -144,21 +143,24 @@
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
-
-- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+- if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB)
+- return -ENODEV;
+-
+- u8 *et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
-- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- gpio_intmask(WGT634U_GPIO_RESET, 1);
-- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
diff --git a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
index e1bf69f8c..301c9a421 100644
--- a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
+++ b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
@@ -9,8 +9,8 @@ out the configuration than the in kernel cfe config reader.
# under Linux.
#
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
+-obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
@@ -254,10 +254,10 @@ out the configuration than the in kernel cfe config reader.
/* Probe for NVRAM header */
static void early_nvram_init(void)
-@@ -34,6 +36,25 @@ static void early_nvram_init(void)
-
- base = mcore->flash_window;
- lim = mcore->flash_window_size;
+@@ -55,6 +57,25 @@ static void early_nvram_init(void)
+ break;
+ #endif
+ }
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
@@ -280,7 +280,7 @@ out the configuration than the in kernel cfe config reader.
off = FLASH_MIN;
while (off <= lim) {
-@@ -75,6 +96,12 @@ int nvram_getenv(char *name, char *val,
+@@ -96,6 +117,12 @@ int nvram_getenv(char *name, char *val,
if (!nvram_buf[0])
early_nvram_init();
@@ -293,7 +293,7 @@ out the configuration than the in kernel cfe config reader.
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;
-@@ -104,6 +131,9 @@ char *nvram_get(const char *name)
+@@ -125,6 +152,9 @@ char *nvram_get(const char *name)
if (!nvram_buf[0])
early_nvram_init();
diff --git a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
index 6bc2b12eb..d259dcf16 100644
--- a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
+++ b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
@@ -8,7 +8,7 @@
static int wdt_time = WDT_DEFAULT_TIME;
static int nowayout = WATCHDOG_NOWAYOUT;
-@@ -50,11 +51,11 @@ static unsigned long bcm47xx_wdt_busy;
+@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
static char expect_release;
static struct timer_list wdt_timer;
static atomic_t ticks;
@@ -18,12 +18,22 @@
+static inline void bcm47xx_wdt_hw_start(u32 ticks)
{
- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+ ssb_watchdog_timer_set(&ssb_bcm47xx, ticks);
- }
-
- static inline int bcm47xx_wdt_hw_stop(void)
-@@ -65,33 +66,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ switch (bcm47xx_active_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
++ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
+ break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+- 0xfffffff);
++ ticks);
+ break;
+ #endif
+ }
+@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
static void bcm47xx_timer_tick(unsigned long unused)
{
if (!atomic_dec_and_test(&ticks)) {
@@ -70,20 +80,25 @@
}
static int bcm47xx_wdt_settimeout(int new_time)
-@@ -243,7 +245,15 @@ static int __init bcm47xx_wdt_init(void)
+@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
if (bcm47xx_wdt_hw_stop() < 0)
return -ENODEV;
- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
+ /* FIXME Other cores */
-+ if(ssb_bcm47xx.chip_id == 0x5354) {
++#ifdef BCM47XX_BUS_TYPE_BCMA
++ if(bcm47xx_active_bus_type == BCM47XX_BUS_TYPE_BCMA &&
++ bcm47xx_bus.ssb.chip_id == 0x5354) {
+ /* Slow WDT clock, no pre-scaling */
+ needs_sw_scale = 0;
+ } else {
++#endif
+ /* Fast WDT clock, needs software pre-scaling */
+ needs_sw_scale = 1;
+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++#ifdef BCM47XX_BUS_TYPE_BCMA
+ }
++#endif
if (bcm47xx_wdt_settimeout(wdt_time)) {
bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
diff --git a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
index 518e63401..09415038a 100644
--- a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
+++ b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
-@@ -246,6 +246,10 @@ static int bcm47xx_get_invariants(struct
+@@ -273,6 +273,10 @@ static int bcm47xx_get_invariants(struct
if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);