diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/etrax-2.6/patches/cris/019-vhdl.patch | 4836 |
1 files changed, 0 insertions, 4836 deletions
diff --git a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch b/target/linux/etrax-2.6/patches/cris/019-vhdl.patch deleted file mode 100644 index 95478f828..000000000 --- a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch +++ /dev/null @@ -1,4836 +0,0 @@ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,533 @@ -+/* -+ foxbone.c -+ Linux Kernel Driver for FoxBone on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+#include <linux/spinlock.h> -+#include <linux/autoconf.h> -+#include <linux/interrupt.h> -+#include <asm/etraxgpio.h> -+#include <asm/arch/svinto.h> -+#include <asm/io.h> -+#include <asm/system.h> -+#include <asm/irq.h> -+#include <asm/arch/io_interface_mux.h> -+ -+ -+#include "foxbone.h" -+#include "foxbone_userspace.h" -+ -+ -+#define Fox_line_Read (1<<1) -+#define Fox_line_WriteData (1<<2) -+#define Fox_line_Reset (1<<3) -+#define Fox_line_WriteAddress (1<<4) -+ -+#define FOX_CLEAR_LINES (~(0x00FFFF00 | Fox_line_Read | Fox_line_WriteAddress | Fox_line_WriteData)) -+ -+#define DEV_NAME "foxbone" -+#define DEV_MAJOR 14 -+ -+spinlock_t foxbone_lock_var = SPIN_LOCK_UNLOCKED; -+unsigned long foxbone_irq_flags; -+// is the userspce device enables ? -+unsigned char foxbone_userspace_is_open = 0; -+ -+// are we processing interrupts ? (during fpga_flash the ints are not allowed to be handles -+unsigned char foxbone_allow_int; -+ -+// the shadow of which ints are enabled -+unsigned int foxbone_shadow_int_high = 0; -+unsigned int foxbone_shadow_int_low = 0; -+ -+// the following four variables get filled when the foxbone driver is started -+// they hold the release and the the application words -+unsigned int FOXBONE_release = 0; -+unsigned int FOXBONE_application1 = 0; -+unsigned int FOXBONE_application2 = 0; -+unsigned int FOXBONE_application3 = 0; -+ -+ -+ -+FOXINT_CALLBACK foxint_callbacks[32]; -+ -+unsigned int foxbone_read(unsigned int add); -+void foxbone_write(unsigned int add, unsigned int data); -+ -+static irqreturn_t foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+ -+unsigned int foxbone_interrupt_enabled = 0; -+ -+ -+ -+void FOX_delay(unsigned int d){ -+ while(d--){ -+ unsigned int i = 0; -+ for(i = 0; i < 32000; i++){ -+ i*=2; -+ i/=2; -+ }; -+ }; -+}; -+ -+ -+void foxbone_lock(void){ -+ spin_lock_irqsave(&foxbone_lock_var, foxbone_irq_flags); -+ -+}; -+ -+void foxbone_unlock(void){ -+ spin_unlock_irqrestore(&foxbone_lock_var, foxbone_irq_flags); -+ -+}; -+ -+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback){ -+ if(irq > 31){ -+ printk("foxbone: trying to register invalid interrupt\n"); -+ return 0; -+ }; -+ if(!foxbone_interrupt_enabled){ -+ foxbone_interrupt_enabled = 1; -+ printk("foxbone: starting interrupt system\n"); -+ int err; -+ if ((err = request_irq(PA_IRQ_NBR, foxbone_pa_interrupt, SA_INTERRUPT | SA_SHIRQ, "foxbone", 123))){ -+ printk("foxbone: request_irq failed: Error %d\n",err); -+ return ; -+ } -+ printk("foxbone: request_irq success -> irq: %ld\n",PA_IRQ_NBR); -+ *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set); -+ }; -+ -+ printk("foxbone: new int %d registered\n", irq); -+ foxint_callbacks[irq] = callback; -+ if(irq < 15){ -+ foxbone_shadow_int_high |= (1<<irq); -+ foxbone_write(0x08, foxbone_shadow_int_high); -+ } else { -+ foxbone_shadow_int_high |= (1<<15); -+ foxbone_write(0x08, foxbone_shadow_int_high); -+ foxbone_shadow_int_low |= (1<<(irq-16)); -+ foxbone_write(0x09, foxbone_shadow_int_low); -+ }; -+ return 1; -+}; -+ -+ -+void foxbone_unregister_interrupt(unsigned char irq){ -+ if(irq > 31){ -+ printk("foxbone: trying to unregister invalid interrupt\n"); -+ return ; -+ }; -+ printk("foxbone: interrupt %d unregistered\n", irq); -+ if(irq < 15){ -+ foxbone_shadow_int_high &= ~(1<<irq); -+ foxbone_write(0x08, foxbone_shadow_int_high); -+ } else { -+ foxbone_shadow_int_low &= ~(1<<(irq-16)); -+ foxbone_write(0x09, foxbone_shadow_int_low); -+ -+ if(!foxbone_shadow_int_low){ -+ foxbone_shadow_int_high &= ~(1<<15); -+ foxbone_write(0x08, foxbone_shadow_int_high); -+ }; -+ }; -+}; -+ -+#if 0 -+#define DBG_INT(x) x -+#else -+#define DBG_INT(x) -+#endif -+ -+// this is the bottom half of our interrupt handler -+static void foxbone_handle_interrupt(void){ -+ if(foxbone_allow_int){ -+ foxbone_lock(); -+ unsigned int irq_high, irq_low, i; -+ DBG_INT(printk("Int handler");) -+ if(*R_PORT_PA_DATA & (1)){ -+ irq_high = foxbone_read(0x08); -+ DBG_INT(printk("Got high_int %d\n", irq_high);) -+ for(i = 0; i < 15; i++){ -+ if(irq_high & (1<<i)){ -+ DBG_INT(printk("Go high_int %d\n",i);) -+ if(foxint_callbacks[i]){ -+ foxint_callbacks[i](i); -+ }; -+ }; -+ }; -+ if(irq_high & (0x8000)){ -+ irq_low = foxbone_read(0x09); -+ DBG_INT(printk("Got low_int %d\n", irq_low);) -+ for(i = 0; i < 16; i++){ -+ if(irq_low & (1<<i)){ -+ DBG_INT(printk("Go low_int %d\n", i);) -+ if(foxint_callbacks[i+16]){ -+ foxint_callbacks[i+16](i+16); -+ }; -+ }; -+ }; -+ -+ }; -+ }; -+ foxbone_unlock(); -+ }; -+}; -+ -+// this is the top half of our interrupt handler -+static void tasklet_foxbone_int(unsigned long data); -+DECLARE_TASKLET(tl_foxint_descr, tasklet_foxbone_int, 0L); -+static void tasklet_foxbone_int(unsigned long data){ -+ -+ DBG_INT(printk("got an int\n");) -+ foxbone_handle_interrupt(); -+ -+}; -+ -+ -+static irqreturn_t -+foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ unsigned long tmp; -+ -+ /* Find what PA interrupts are active */ -+ tmp = (*R_IRQ_READ1); -+// printk("_____%ud",*R_IRQ_READ1); -+ /* Find those that we have enabled */ -+// tmp &= (1 << R_IRQ_MASK1_SET__pa0__BITNR); -+ -+ /* Clear them.. */ -+ // *R_IRQ_MASK1_CLR = tmp; -+ //(1 << R_IRQ_MASK1_SET__pa0__BITNR); -+ -+ tasklet_schedule(&tl_foxint_descr); -+ // *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set); -+ -+ return IRQ_RETVAL(1); -+} -+ -+ -+static void foxbone_bus_in(void){ -+ // turn all the iog8-15 pins into outputs -+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ -+ // turn all the iog16-23 pins into outputs -+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+}; -+ -+static void foxbone_bus_out(void){ -+ // turn all the iog8-15 pins into outputs -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ -+ // turn all the iog16-23 pins into outputs -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+}; -+ -+void foxbone_reset(unsigned char reset){ -+ if(reset){ -+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Reset; -+ } else { -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Reset; -+ }; -+}; -+ -+static void foxbone_setadd(unsigned long address){ -+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; -+ -+ *R_PORT_G_DATA = port_g_data_shadow |= (address << 8)| Fox_line_WriteAddress; -+ -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteAddress; -+}; -+ -+ -+static unsigned int foxbone_read_data(unsigned char next){ -+ unsigned int data; -+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; -+ -+ foxbone_bus_in(); -+ -+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Read; -+ -+ // do the reading now -+ data = *R_PORT_G_DATA; -+ data = *R_PORT_G_DATA; -+ -+ // now return the Fox_line_ReadData to low state to idle the bus from the FPGA side -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Read; -+ foxbone_bus_out(); -+ return ((unsigned int)((data&0x00FFFF00)>>8)); -+} -+ -+ -+static unsigned int foxbone_write_data(unsigned int data, unsigned char next) { -+ // clear all address/data/control bits -+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; -+ -+ *R_PORT_G_DATA = port_g_data_shadow |= (data << 8)| Fox_line_WriteData; -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData; -+ -+ return 0; -+} -+ -+void foxbone_write(unsigned int add, unsigned int data){ -+ foxbone_setadd(add); -+ foxbone_write_data(data, 0); -+}; -+ -+unsigned int foxbone_read(unsigned int add){ -+ foxbone_setadd(add); -+ return foxbone_read_data(0); -+}; -+ -+void foxbone_write_next(unsigned data){ -+ foxbone_write_data(data, 1); -+}; -+ -+unsigned int foxbone_read_next(void){ -+ return foxbone_read_data(1); -+}; -+ -+void foxbone_bulk_write(unsigned int *data, unsigned int length, unsigned int add){ -+ unsigned int i; -+ foxbone_write(add, *data); -+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData; -+ for(i = 1; i < length; i++){ -+ *R_PORT_G_DATA = port_g_data_shadow = def_val | data[i]<<8; -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData; -+ }; -+}; -+ -+void foxbone_bulk_read(unsigned int *data, unsigned int length, unsigned int add){ -+ //printk("Get data from %d %d\n", add, length); -+ unsigned int i; -+ for(i = 0; i < length; i++){ -+ if(i == 0){ -+ data[i] = foxbone_read(add); -+ } else { -+ data[i] = foxbone_read_next(); -+ }; -+ }; -+ -+}; -+ -+void foxbone_initialise_bus(void){ -+ memset(foxint_callbacks, 0, sizeof(FOXINT_CALLBACK)*32); -+ -+ // clear all address/data/control bits -+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; -+ foxbone_reset(0); -+ int i; -+ for(i = 0; i < 32000; i++){ -+ i++; -+ i--; -+ }; -+ foxbone_reset(1); -+ -+ foxbone_bus_out(); -+ -+ FOXBONE_release = foxbone_read(0x04); -+ FOXBONE_application1 = foxbone_read(0x05); -+ FOXBONE_application2 = foxbone_read(0x06); -+ FOXBONE_application3 = foxbone_read(0x07); -+ printk("foxbone : release = 0x%04x\n", FOXBONE_release); -+ printk("foxbone : application word 1 = 0x%04x\n", FOXBONE_application1); -+ printk("foxbone : application word 2 = 0x%04x\n", FOXBONE_application2); -+ printk("foxbone : application word 3 = 0x%04x\n", FOXBONE_application3); -+ -+ -+}; -+ -+ -+static ssize_t foxbone_userspace_write(struct file * file, const char * buffer, size_t count, loff_t *offset){ -+ if(count > (64 * 1024)){ -+ printk("foxbone: trying to bulk write too much data\n"); -+ return 1; -+ }; -+ unsigned int *bulk_data = (unsigned int) kmalloc(count, GFP_KERNEL); -+ -+ copy_from_user((char*) bulk_data, buffer, count); -+ -+ foxbone_bulk_write(&bulk_data[2], bulk_data[1], bulk_data[0]); -+ -+ kfree(bulk_data); -+ return 0; -+}; -+ -+ -+static ssize_t foxbone_userspace_read(struct file *file, char *buffer, size_t count, loff_t *offset){ -+ if(count > (64 * 1024)){ -+ printk("foxbone: trying to bulk read too much data\n"); -+ return 0; -+ }; -+ -+ // find out which register we want to read -+ unsigned int bulk_data_info[2]; -+ copy_from_user((char*) bulk_data_info, buffer, 8); -+ -+ // read the data -+ unsigned int *bulk_data = (unsigned int)kmalloc(count, GFP_KERNEL); -+ -+ foxbone_bulk_read(&bulk_data[0], bulk_data_info[1], bulk_data_info[0]); -+ -+ copy_to_user((char*)buffer, (char*)bulk_data, count); -+ -+ kfree(bulk_data); -+ -+ return count / 4; -+}; -+ -+// the app has send us some control data -+static int foxbone_userspace_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ int retval = 0; -+ FOXBONE_WRITE fb_write; -+ switch (cmd) { -+ case IOCTL_FOXBONE_INIT_BUS: -+ foxbone_initialise_bus(); -+ break; -+ -+ case IOCTL_FOXBONE_WRITE_REG: -+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write)); -+ foxbone_write(fb_write.reg, fb_write.data); -+ break; -+ -+ case IOCTL_FOXBONE_READ_REG: -+ retval = foxbone_read(arg); -+ break; -+ -+ case IOCTL_FOXBONE_WRITE_NEXT: -+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write)); -+ foxbone_write_next(fb_write.data); -+ break; -+ -+ case IOCTL_FOXBONE_READ_NEXT: -+ retval = foxbone_read_next(); -+ break; -+ -+ case IOCTL_FOXBONE_INTERRUPTS: -+ foxbone_allow_int = arg; -+ break; -+ -+ default: -+ printk("foxbone_userspace : unknown ioctl\n"); -+ break; -+ } -+ return retval; -+}; -+ -+ -+ -+static int foxbone_userspace_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("foxbone_userspace : trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxbone_userspace_is_open) { -+ printk("foxbone_userspace : Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int foxbone_userspace_close(struct inode * inode, struct file * file){ -+ -+ foxbone_userspace_is_open = 0; -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxbone_userspace_fops = { -+ ioctl: foxbone_userspace_ioctl, -+ write: foxbone_userspace_write, -+ read: foxbone_userspace_read, -+ open: foxbone_userspace_open, -+ release: foxbone_userspace_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int foxbone_userspace_init(void){ -+ // flame the kprintk -+ printk("foxbone_userspace : FOX-VHDL userspace access module\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxbone_userspace_fops)) { -+ printk( "fpga_mod.ko : Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ foxbone_userspace_is_open = 0; -+ printk("foxbone_userspace : Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void foxbone_userspace_exit(void){ -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+ -+static int __init foxbone_init(void){ -+ printk("foxbone : FOX-VHDL FOXBONE access module started\n"); -+ foxbone_initialise_bus(); -+ foxbone_allow_int = 1; -+ foxbone_userspace_init(); -+ return 0; -+} -+ -+ -+static void __exit foxbone_exit(void){ -+ printk( "foxbone : Cleanup\n" ); -+ foxbone_userspace_exit(); -+} -+ -+module_init (foxbone_init); -+module_exit (foxbone_exit); -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,21 @@ -+// prototypes for foxbone compliant modules -+ -+typedef void (*FOXINT_CALLBACK) (unsigned int); -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -+void foxbone_unregister_interrupt(unsigned char irq); -+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback); -+void foxbone_reset(unsigned char reset); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,155 @@ -+/* -+ foxbone_syscalls.c -+ Linux Kernel syscalls for FoxBone on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/kernel.h> -+#include <asm/uaccess.h> -+#include <linux/foxbone_syscalls.h> -+#include "foxbone.h" -+ -+asmlinkage unsigned short int sys_foxboneread(unsigned short int reg){ -+ return foxbone_read(reg); -+}; -+ -+asmlinkage void sys_foxbonewrite(unsigned short int reg, unsigned short int value){ -+ foxbone_write(reg, value); -+}; -+ -+asmlinkage void sys_foxbonebulkread(unsigned short int reg, unsigned short int *value, unsigned int length){ -+ unsigned int i; -+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL); -+ *buffer = foxbone_read(reg); -+ for(i = 1; i < length; i++){ -+ buffer[i] = foxbone_read_next(); -+ }; -+ copy_to_user(value, buffer, length * 2); -+ kfree(buffer); -+ -+}; -+ -+asmlinkage void sys_foxbonebulkwrite(unsigned short int reg, unsigned short int *value, unsigned int length){ -+ unsigned int i; -+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL); -+ copy_from_user(buffer, value, length * 2); -+ foxbone_write(reg, *buffer); -+ for(i = 1; i < length; i++){ -+ foxbone_write_next(buffer[i]); -+ }; -+ kfree(buffer); -+}; -+ -+ -+/* -+ interrupt handling from userspace -+*/ -+ -+typedef struct _FOX_INT { -+ unsigned char enabled; -+ unsigned char count; -+ unsigned char wakeup; -+ wait_queue_head_t wait_queue; -+} FOX_INT; -+ -+ -+FOX_INT syscall_interrupts[32]; -+ -+ -+void foxbone_interrupt_callback(unsigned int interrupt){ -+ //printk("GOT INT %d\n", irq_no); -+ if(syscall_interrupts[interrupt].enabled){ -+ syscall_interrupts[interrupt].count ++; -+ if(syscall_interrupts[interrupt].wakeup){ -+ wake_up_interruptible(&syscall_interrupts[interrupt].wait_queue); -+ }; -+ }; -+}; -+ -+ -+asmlinkage void sys_foxboneintreg(unsigned long int interrupt, unsigned char state){ -+ if(interrupt > 31){ -+ interrupt = 31; -+ }; -+ if(state){ -+ foxbone_register_interrupt(interrupt, foxbone_interrupt_callback); -+ syscall_interrupts[interrupt].enabled = 1; -+ syscall_interrupts[interrupt].count = 0; -+ init_waitqueue_head(&syscall_interrupts[interrupt].wait_queue); -+ } else { -+ foxbone_unregister_interrupt(interrupt); -+ syscall_interrupts[interrupt].enabled = 0; -+ }; -+}; -+ -+ -+asmlinkage unsigned int sys_foxboneintcheck( unsigned long int interrupt){ -+ unsigned int retval = 0xffff; -+ if(interrupt > 31){ -+ interrupt = 31; -+ }; -+ if(syscall_interrupts[interrupt].enabled){ -+ retval = syscall_interrupts[interrupt].count; -+ syscall_interrupts[interrupt].count = 0; -+ }; -+ return retval; -+}; -+ -+ -+asmlinkage unsigned int sys_foxboneintwait(unsigned long int interrupt, unsigned char timeout){ -+ unsigned int retval = 0xffff; -+ if(interrupt > 31){ -+ interrupt = 31; -+ }; -+ if(syscall_interrupts[interrupt].enabled){ -+ syscall_interrupts[interrupt].wakeup = 1; -+ syscall_interrupts[interrupt].count = 0; -+ interruptible_sleep_on_timeout(&syscall_interrupts[interrupt].wait_queue, timeout*HZ); -+ if(syscall_interrupts[interrupt].count != 0){ -+ retval = syscall_interrupts[interrupt].count; -+ }; -+ syscall_interrupts[interrupt].count = 0; -+ syscall_interrupts[interrupt].wakeup = 0; -+ }; -+ return retval; -+}; -+ -+ -+asmlinkage void sys_foxbonereset(unsigned short int reg){ -+ foxbone_reset(0); -+ int i; -+ for(i = 0; i < 32000; i++){ -+ i++; -+ i--; -+ }; -+ foxbone_reset(1); -+}; -+ -+static int __init foxbone_syscall_init(void){ -+ memset(syscall_interrupts, 0, sizeof(FOX_INT) * 32); -+ return 0; -+} -+ -+ -+static void __exit foxbone_syscall_exit(void){ -+} -+ -+module_init (foxbone_syscall_init); -+module_exit (foxbone_syscall_exit); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,17 @@ -+// These are the ioctls for accessing /dev/foxbone -+ -+#define IOCTL_FOXBONE_INIT_BUS 0x3341 -+#define IOCTL_FOXBONE_WRITE_REG 0x3342 -+#define IOCTL_FOXBONE_READ_REG 0x3343 -+#define IOCTL_FOXBONE_WRITE_NEXT 0x3344 -+#define IOCTL_FOXBONE_READ_NEXT 0x3345 -+#define IOCTL_FOXBONE_INTERRUPTS 0x3346 -+ -+// the data structure used to write a register -+typedef struct _FOXBONE_WRITE { -+ unsigned int reg; -+ unsigned int data; -+} FOXBONE_WRITE; -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_FOXBONE) += foxbone.o -+obj-$(CONFIG_FOXBONE) += foxbone_syscalls.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,170 @@ -+/* -+ fox_event.c -+ Linux Kernel Driver for FoxBone EventCounter on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "event" -+#define DEV_MAJOR 193 -+ -+#include "foxbone.h" -+ -+unsigned char foxevent_is_open = 0; -+ -+ -+#define IOCTL_FOXBONE_EVENT_SET_ALARM 0x4745 -+#define IOCTL_FOXBONE_EVENT_GET_COUNT 0x4746 -+#define IOCTL_FOXBONE_EVENT_GET_ALARM 0x4747 -+#define IOCTL_FOXBONE_EVENT_RESET_ALARM 0x4748 -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ unsigned int current_io = 0; -+ switch (cmd) { -+ case IOCTL_FOXBONE_EVENT_SET_ALARM: -+ foxbone_write(0x0040, 0); -+ foxbone_write(0x0041, arg); -+ foxbone_write(0x0040, 3); -+ break; -+ -+ case IOCTL_FOXBONE_EVENT_GET_COUNT: -+ retval = foxbone_read(0x0042); -+ break; -+ -+ case IOCTL_FOXBONE_EVENT_GET_ALARM: -+ retval = foxbone_read(0x0043); -+ break; -+ -+ case IOCTL_FOXBONE_EVENT_RESET_ALARM: -+ current_io = foxbone_read(0x0040); -+ current_io &= ~(1<<1); -+ foxbone_write(0x0040, 0); -+ current_io |= (1<<1); -+ foxbone_write(0x0040, 0); -+ break; -+ -+ default: -+ printk("fox_event: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_event: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxevent_is_open) { -+ printk("fox_event: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ printk("fox_event: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxevent_is_open = 0; -+ -+ -+ // more flaming -+ printk("fox_event: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxevent_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_event: FOX-VHDL FPGA io module\n"); -+ //printk("fox_event: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_event: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxevent_module_fops)) { -+ printk( "fox_event: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxevent_is_open = 0; -+ printk("fox_event: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_event: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_EVENT) += fox_event.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_FOX_FPGA) += dpa3palg.oo dpalg.oo dpjtag2.oo dpjtag.oo dpuncomp.oo dpuser.oo fpga_module.oo -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOX_FPGA) += dpa3palg.o dpalg.o dpjtag2.o dpjtag.o dpuncomp.o dpuser.o fpga_module.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,164 @@ -+/* -+ fox_io.c -+ Linux Kernel Driver for FoxBone I/O on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "foxio" -+#define DEV_MAJOR 190 -+ -+#include "foxbone.h" -+ -+unsigned char foxio_is_open = 0; -+ -+ -+#define IOCTL_FOXBONE_IO_SET 0x4545 -+#define IOCTL_FOXBONE_IO_CLR 0x4546 -+#define IOCTL_FOXBONE_IO_GET 0x4547 -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ unsigned int current_io = 0; -+ switch (cmd) { -+ case IOCTL_FOXBONE_IO_SET: -+ current_io = foxbone_read(0x0014); -+ current_io |= (1<<arg); -+ foxbone_write(0x0014, current_io); -+ break; -+ -+ case IOCTL_FOXBONE_IO_CLR: -+ current_io = foxbone_read(0x0014); -+ current_io &= ~(1<<arg); -+ foxbone_write(0x0014, current_io); -+ break; -+ -+ case IOCTL_FOXBONE_IO_GET: -+ retval = foxbone_read(0x0015); -+ break; -+ -+ -+ default: -+ printk("fox_io: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_io: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxio_is_open) { -+ printk("fox_io: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ printk("fox_io: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxio_is_open = 0; -+ -+ -+ // more flaming -+ printk("fox_io: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxio_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_io: FOX-VHDL FPGA io module\n"); -+ //printk("fox_io: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_io: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxio_module_fops)) { -+ printk( "fox_io: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxio_is_open = 0; -+ printk("fox_io: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_io: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_IO) += fox_io.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,154 @@ -+/* -+ fox_loopback.c -+ Linux Kernel Driver for FoxBone Loopback Register on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "loopback" -+#define DEV_MAJOR 192 -+ -+#include "foxbone.h" -+ -+unsigned char foxloopback_is_open = 0; -+ -+ -+#define IOCTL_FOXBONE_LOOPBACK_SET 0x4045 -+#define IOCTL_FOXBONE_LOOPBACK_GET 0x4046 -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ unsigned int current_io = 0; -+ switch (cmd) { -+ case IOCTL_FOXBONE_LOOPBACK_SET: -+ foxbone_write(0x0013, arg); -+ break; -+ -+ case IOCTL_FOXBONE_LOOPBACK_GET: -+ retval = foxbone_read(0x0013); -+ break; -+ -+ default: -+ printk("fox_loopback: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_loopback: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxloopback_is_open) { -+ printk("fox_loopback: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ printk("fox_loopback: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxloopback_is_open = 0; -+ -+ -+ // more flaming -+ printk("fox_loopback: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxloopback_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_loopback: FOX-VHDL FPGA io module\n"); -+ //printk("fox_loopback: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_loopback: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxloopback_module_fops)) { -+ printk( "fox_loopback: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxloopback_is_open = 0; -+ printk("fox_loopback: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_loopback: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,172 @@ -+/* -+ fox_multiply.c -+ Linux Kernel Driver for FoxBone 32x32 fast multiplier on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "multiply" -+#define DEV_MAJOR 194 -+ -+#include "foxbone.h" -+ -+unsigned char foxmultiply_is_open = 0; -+ -+ -+#define IOCTL_FOXBONE_MUTIPLY 0x4945 -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ long data[3], i; -+ int retval = 0; -+ switch (cmd) { -+ case IOCTL_FOXBONE_MUTIPLY: -+ copy_from_user((char*)&data[0], (char*)arg, sizeof(long) * 3); -+ data[2] = jiffies; -+ printk("%ld, %ld\n", data[0], data[1]); -+ //for(i = 0; i < 1024*1024; i++){ -+ foxbone_write(0x0021, (data[0]>>16)&0xffff); -+ foxbone_write(0x0020, data[0]&0xffff); -+ foxbone_write(0x0023, (data[1]>>16)&0xffff); -+ foxbone_write(0x0022, data[1]&0xffff); -+ data[0] = foxbone_read(0x0025); -+ data[0] = (data[0] << 16) + foxbone_read(0x0024); -+ data[1] = foxbone_read(0x0027); -+ data[1] = (data[1] << 16) + foxbone_read(0x0026); -+ /*printk("%4x\n", foxbone_read(0x0020)); -+ printk("%4x\n", foxbone_read(0x0021)); -+ printk("%4x\n", foxbone_read(0x0022)); -+ printk("%4x\n", foxbone_read(0x0023)); -+ -+ printk("%4x\n", foxbone_read(0x0024)); -+ printk("%4x\n", foxbone_read(0x0025)); -+ printk("%4x\n", foxbone_read(0x0026)); -+ printk("%4x\n", foxbone_read(0x0027)); -+ */ -+ //}; -+ data[2] = jiffies - data[2]; -+ copy_to_user((char*)arg, (char*)&data[0], sizeof(unsigned long) * 3); -+ break; -+ -+ default: -+ printk("fox_multiply: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_multiply: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxmultiply_is_open) { -+ printk("fox_multiply: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ //printk("fox_multiply: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ // unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxmultiply_is_open = 0; -+ -+ -+ // more flaming -+ //printk("fox_multiply: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxmultiply_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_multiply: FOX-VHDL FPGA multiplier module\n"); -+ //printk("fox_multiply: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_multiply: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxmultiply_module_fops)) { -+ printk( "fox_multiply: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxmultiply_is_open = 0; -+ printk("fox_multiply: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_multiply: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,180 @@ -+/* -+ fox_pwm.c -+ Linux Kernel Driver for FoxBone 16 channel PWM generator on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "pwm" -+#define DEV_MAJOR 15 -+ -+#include "foxbone.h" -+ -+unsigned char foxpwm_is_open = 0; -+ -+ -+#define IOCTL_PWM_ENABLE 0x2310 -+#define IOCTL_PWM_DISABLE 0x2311 -+#define IOCTL_PWM_CHANNEL_BASE 0x2320 -+#define IOCTL_PWM_CHANNEL0 0x2320 -+#define IOCTL_PWM_CHANNEL1 0x2321 -+#define IOCTL_PWM_CHANNEL2 0x2322 -+#define IOCTL_PWM_CHANNEL3 0x2323 -+#define IOCTL_PWM_CHANNEL4 0x2324 -+#define IOCTL_PWM_CHANNEL5 0x2325 -+#define IOCTL_PWM_CHANNEL6 0x2326 -+#define IOCTL_PWM_CHANNEL7 0x2327 -+#define IOCTL_PWM_CHANNEL8 0x2328 -+#define IOCTL_PWM_CHANNEL9 0x2329 -+#define IOCTL_PWM_CHANNELA 0x232a -+#define IOCTL_PWM_CHANNELB 0x232b -+#define IOCTL_PWM_CHANNELC 0x232c -+#define IOCTL_PWM_CHANNELD 0x232d -+#define IOCTL_PWM_CHANNELE 0x232e -+#define IOCTL_PWM_CHANNELF 0x232f -+ -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ unsigned int current_pwm; -+ if((cmd >= IOCTL_PWM_CHANNEL0) && (cmd <= IOCTL_PWM_CHANNELF)){ -+ foxbone_write(0x0050 + (cmd - IOCTL_PWM_CHANNEL_BASE), arg); -+ } else { -+ switch (cmd) { -+ case IOCTL_PWM_ENABLE: -+ current_pwm = foxbone_read(0x0060); -+ current_pwm |= (1<<arg); -+ foxbone_write(0x0060, current_pwm); -+ break; -+ -+ case IOCTL_PWM_DISABLE: -+ current_pwm = foxbone_read(0x0060); -+ current_pwm &= ~(1<<arg); -+ foxbone_write(0x0060, current_pwm); -+ break; -+ -+ default: -+ printk("fox_pwm: unknown ioctl\n"); -+ break; -+ } -+ }; -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_pwm: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxpwm_is_open) { -+ printk("fox_pwm: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ printk("fox_pwm: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxpwm_is_open = 0; -+ -+ -+ // more flaming -+ printk("fox_pwm: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxpwm_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_pwm: FOX-VHDL FPGA PWM module\n"); -+ //printk("fox_pwm: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_pwm: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxpwm_module_fops)) { -+ printk( "fox_pwm: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxpwm_is_open = 0; -+ printk("fox_pwm: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_pwm: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,16 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,168 @@ -+/* -+ fox_timebase.c -+ Linux Kernel Driver for FoxBone TimeBase on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "timebase" -+#define DEV_MAJOR 191 -+ -+#include "foxbone.h" -+ -+unsigned char foxtimebase_is_open = 0; -+ -+ -+#define IOCTL_FOXBONE_TIMEBASE_ENABLE 0x4645 -+#define IOCTL_FOXBONE_TIMEBASE_DISABLE 0x4646 -+#define IOCTL_FOXBONE_TIMEBASE_SETLO 0x4647 -+#define IOCTL_FOXBONE_TIMEBASE_SETHI 0x4648 -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ switch (cmd) { -+ case IOCTL_FOXBONE_TIMEBASE_ENABLE: -+ foxbone_write(0x0100, 0x01); -+ break; -+ -+ case IOCTL_FOXBONE_TIMEBASE_DISABLE: -+ foxbone_write(0x0100, 0x00); -+ break; -+ -+ case IOCTL_FOXBONE_TIMEBASE_SETLO: -+ foxbone_write(0x0100, 0x00); -+ foxbone_write(0x0102, arg); -+ foxbone_write(0x0100, 0x01); -+ break; -+ -+ case IOCTL_FOXBONE_TIMEBASE_SETHI: -+ foxbone_write(0x0100, 0x00); -+ foxbone_write(0x0103, arg); -+ foxbone_write(0x0100, 0x01); -+ break; -+ -+ default: -+ printk("fox_timebase: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("fox_timebase: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(foxtimebase_is_open) { -+ printk("fox_timebase: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ -+ // more flaming -+ printk("fox_timebase: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ foxtimebase_is_open = 0; -+ -+ -+ // more flaming -+ printk("fox_timebase: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations foxtimebase_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("fox_timebase: FOX-VHDL FPGA timebase module\n"); -+ //printk("fox_timebase: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("fox_timebase: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxtimebase_module_fops)) { -+ printk( "fox_timebase: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ foxtimebase_is_open = 0; -+ printk("fox_timebase: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "fox_timebase: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,661 @@ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/errno.h> -+#include <linux/string.h> -+#include <linux/mm.h> -+#include <linux/tty.h> -+#include <linux/slab.h> -+#include <linux/vmalloc.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+ -+#include <asm/uaccess.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+ -+#include "foxbone.h" -+ -+ -+#if 0 -+#define DBG(x) x -+#else -+#define DBG(x) -+#endif -+ -+ -+ -+// software delay -+void FOXVHDL_delay(int ms) { -+ int i,a; -+ int delayvar=10; -+ -+ for (a=0;a<ms;a++) { -+ for (i=0;i<35;i++) { -+ delayvar*=2; -+ delayvar/=2; -+ } -+ } -+} -+ -+ -+ -+/* -+|| -+|| FOXVHDL CTL functions -+|| -+*/ -+ -+ -+static unsigned char FOXVHDL_current_bank = 0xff; -+ -+static unsigned char blitting = 1; -+ -+static unsigned char refreshrate = 6; -+ -+ -+ -+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) { -+ // translate the three color passed in a single 16 bit color word -+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3); -+ return result; -+} -+ -+ -+ -+ -+// wait until the videostate pin has the wanted value -+void FOXVHDL_wait_videostate(unsigned char wait_state){ -+/* unsigned char vid_state = 0; -+ unsigned int max_error = 0xffff; -+ //printk("Start wait\n"); -+ do { -+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState); -+ max_error--; -+ } while((vid_state != wait_state)&&(max_error > 10)); -+ */ -+ DBG(if(max_error < 11){printk("Stop wait\n");};) -+}; -+ -+ -+// choose the bank that we want to display -+// OG5 == 0 --> Bank0 -+// OG5 == 1 --> Bank1 -+void FOXVHDL_set_bank(unsigned char bank){ -+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);) -+ if(FOXVHDL_current_bank == bank){ -+ return; -+ }; -+ -+ DBG(printk("FOXVHDL_set_bank\n");) -+ -+ FOXVHDL_current_bank = bank; -+ foxbone_write(0x7001, FOXVHDL_current_bank); -+ -+ -+}; -+ -+ -+// blit the bank -+void FOXVHDL_swap_bank(void){ -+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1)); -+}; -+ -+ -+// initialise the I/O pins -+void FOXVHDL_init(void){ -+ DBG(printk("FOXVHDL_init\n");) -+ -+ FOXVHDL_current_bank = 0; -+ -+ FOXVHDL_set_bank(1); -+ -+}; -+ -+/* -+|| -+|| FOXVHDL IMAGE FUNCTIONS -+|| -+*/ -+#define Fox_line_WriteData (1<<2) -+ -+void FOXVHDL_blit(unsigned short int *image){ -+ unsigned long i; -+ unsigned int fb_ctl_reg; -+ -+ if(blitting){ -+ // reset the address pointer -+ fb_ctl_reg = foxbone_read(0x7001); -+ fb_ctl_reg |= (1<<4); -+ foxbone_write(0x7001, fb_ctl_reg); -+ fb_ctl_reg &= ~(1<<4); -+ foxbone_write(0x7001, fb_ctl_reg); -+ -+ foxbone_write(0x7000, image[0]); -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ -+ for(i = 1; i < 640 * 400; i++){ -+ -+ *R_PORT_G_DATA = port_g_data_shadow = -+ (port_g_data_shadow & 0xff0000ff) | image[i]<<8; -+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_WriteData; -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData; -+ }; -+ for(i = 0; i <6144; i++){ -+ foxbone_write_next(0); -+ }; -+ FOXVHDL_swap_bank(); -+ }; -+}; -+ -+ -+ -+ -+ -+ -+/* -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|| -+|| FRAMEBUFFER CODE -+|| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+ -+*/ -+ -+ -+ -+ -+#define VIDEOMEMSIZE (640 * 400 * 2) //512K -+ -+static void *videomemory; -+static u_long videomemorysize = VIDEOMEMSIZE; -+ -+static unsigned char fb_started = 0; -+ -+static struct fb_var_screeninfo foxfb_default __initdata = { -+ .xres = 640, -+ .yres = 400, -+ .xres_virtual = 640, -+ .yres_virtual = 400, -+ .bits_per_pixel = 16, -+ .red = { 0, 5, 0 }, -+ .green = { 5, 6, 0 }, -+ .blue = { 11, 5, 0 }, -+ .activate = FB_ACTIVATE_NOW, -+ .height = -1, -+ .width = -1, -+ .vmode = FB_VMODE_NONINTERLACED, -+}; -+ -+static struct fb_fix_screeninfo foxfb_fix __initdata = { -+ .id = "FOX-VHDL FB", -+ .type = FB_TYPE_PACKED_PIXELS, -+ .visual = FB_VISUAL_TRUECOLOR, -+ .xpanstep = 1, -+ .ypanstep = 1, -+ .ywrapstep = 1, -+ .accel = FB_ACCEL_NONE, -+}; -+ -+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); -+static int foxfb_set_par(struct fb_info *info); -+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info); -+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); -+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma); -+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); -+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); -+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image); -+ -+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+ -+static struct fb_ops foxfb_ops = { -+ .fb_check_var = foxfb_check_var, -+ .fb_set_par = foxfb_set_par, -+ .fb_setcolreg = foxfb_setcolreg, -+ -+ .fb_pan_display = foxfb_pan_display, -+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect, -+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea, -+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit, -+ .fb_mmap = foxfb_mmap, -+ .fb_ioctl = foxfb_ioctl, -+}; -+ -+// this function is defined in fbmem.c -+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+ -+// this should be a free one -+#define FOX_FBIOGET_SCREEN 0x4642 -+#define FOX_FBBLIT 0x4643 -+#define FOX_FB_RATE 0x4645 -+#define FOX_FB_TFT 0x4646 -+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){ -+ void __user *argp = (void __user *)arg; -+ unsigned int fb_ctl_reg; -+ switch(cmd){ -+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space -+ case FOX_FBIOGET_SCREEN: -+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){ -+ return 0; -+ } else { -+ return -1; -+ }; -+ case FOX_FBBLIT: -+ fb_ctl_reg = foxbone_read(0x7001); -+ if(arg){ -+ printk("Enable FB\n"); -+ fb_ctl_reg &= ~(1<<1); -+ } else { -+ printk("Disable FB\n"); -+ fb_ctl_reg |= (1<<1); -+ }; -+ blitting = arg; -+ foxbone_write(0x7001, fb_ctl_reg); -+ break; -+ case FOX_FB_RATE: -+ if((arg > 9) || (arg < 1)){ -+ printk("fb0 : Illegal refreshrate\n"); -+ break; -+ }; -+ refreshrate = arg; -+ printk("fb0 : new refreshrate\n"); -+ break; -+ case FOX_FB_TFT: -+ fb_ctl_reg = foxbone_read(0x7001); -+ if(arg){ -+ printk("Enable TFT\n"); -+ fb_ctl_reg |= (1<<3); -+ } else { -+ printk("Disable TFT\n"); -+ fb_ctl_reg &= ~(1<<3); -+ }; -+ foxbone_write(0x7001, fb_ctl_reg); -+ break; -+ default: -+ return fb_ioctl(inode, file, cmd, arg); -+ }; -+ return 0; -+}; -+ -+// TODO add our own optimized code here -+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){ -+ cfb_fillrect(info, rect); -+}; -+ -+ -+// TODO add our own optimized code here -+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){ -+ cfb_copyarea(info, area); -+}; -+ -+// TODO add our own optimized code here -+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){ -+ cfb_imageblit(info, image); -+}; -+ -+ -+/* -+ * Internal routines -+ */ -+ -+static u_long get_line_length(int xres_virtual, int bpp) -+{ -+ u_long length; -+ -+ length = xres_virtual * bpp; -+ length = (length + 31) & ~31; -+ length >>= 3; -+ return (length); -+} -+ -+ /* -+ * Setting the video mode has been split into two parts. -+ * First part, xxxfb_check_var, must not write anything -+ * to hardware, it should only verify and adjust var. -+ * This means it doesn't alter par but it does use hardware -+ * data from it to check this var. -+ */ -+ -+static int foxfb_check_var(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ u_long line_length; -+ -+ if (var->vmode & FB_VMODE_CONUPDATE) { -+ var->vmode |= FB_VMODE_YWRAP; -+ var->xoffset = info->var.xoffset; -+ var->yoffset = info->var.yoffset; -+ } -+ -+ var->xres = 640; -+ var->yres = 400; -+ -+ var->bits_per_pixel = 16; -+ -+ if (var->xres_virtual < var->xoffset + var->xres) -+ var->xres_virtual = var->xoffset + var->xres; -+ if (var->yres_virtual < var->yoffset + var->yres) -+ var->yres_virtual = var->yoffset + var->yres; -+ -+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); -+ if (line_length * var->yres_virtual > videomemorysize) -+ return -ENOMEM; -+ -+ var->red.offset = 0; -+ var->red.length = 5; -+ var->green.offset = 5; -+ var->green.length = 6; -+ var->blue.offset = 11; -+ var->blue.length = 5; -+ var->transp.offset = 0; -+ var->transp.length = 0; -+ var->red.msb_right = 0; -+ var->green.msb_right = 0; -+ var->blue.msb_right = 0; -+ var->transp.msb_right = 0; -+ -+ return 0; -+} -+ -+ -+ -+/* This routine actually sets the video mode. It's in here where we -+ * the hardware state info->par and fix which can be affected by the -+ * change in par. For this driver it doesn't do much. -+ */ -+static int foxfb_set_par(struct fb_info *info){ -+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel); -+ return 0; -+} -+ -+/* -+ * Set a single color register. The values supplied are already -+ * rounded down to the hardware's capabilities (according to the -+ * entries in the var structure). Return != 0 for invalid regno. -+ */ -+ -+ -+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){ -+ if (regno >= 256) /* no. of hw registers */ -+ return 1; -+ -+ /* grayscale works only partially under directcolor */ -+ if (info->var.grayscale) { -+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */ -+ red = green = blue = -+ (red * 77 + green * 151 + blue * 28) >> 8; -+ } -+ -+ /* Directcolor: -+ * var->{color}.offset contains start of bitfield -+ * var->{color}.length contains length of bitfield -+ * {hardwarespecific} contains width of RAMDAC -+ * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset) -+ * RAMDAC[X] is programmed to (red, green, blue) -+ * -+ * Pseudocolor: -+ * uses offset = 0 && length = RAMDAC register width. -+ * var->{color}.offset is 0 -+ * var->{color}.length contains widht of DAC -+ * cmap is not used -+ * RAMDAC[X] is programmed to (red, green, blue) -+ * Truecolor: -+ * does not use DAC. Usually 3 are present. -+ * var->{color}.offset contains start of bitfield -+ * var->{color}.length contains length of bitfield -+ * cmap is programmed to (red << red.offset) | (green << green.offset) | -+ * (blue << blue.offset) | (transp << transp.offset) -+ * RAMDAC does not exist -+ */ -+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) -+ switch (info->fix.visual) { -+ case FB_VISUAL_TRUECOLOR: -+ case FB_VISUAL_PSEUDOCOLOR: -+ red = CNVT_TOHW(red, info->var.red.length); -+ green = CNVT_TOHW(green, info->var.green.length); -+ blue = CNVT_TOHW(blue, info->var.blue.length); -+ transp = CNVT_TOHW(transp, info->var.transp.length); -+ break; -+ case FB_VISUAL_DIRECTCOLOR: -+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */ -+ green = CNVT_TOHW(green, 8); -+ blue = CNVT_TOHW(blue, 8); -+ /* hey, there is bug in transp handling... */ -+ transp = CNVT_TOHW(transp, 8); -+ break; -+ } -+#undef CNVT_TOHW -+ /* Truecolor has hardware independent palette */ -+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) { -+ u32 v; -+ -+ if (regno >= 16) -+ return 1; -+ -+ v = (red << info->var.red.offset) | -+ (green << info->var.green.offset) | -+ (blue << info->var.blue.offset) | -+ (transp << info->var.transp.offset); -+ switch (info->var.bits_per_pixel) { -+ case 8: -+ break; -+ case 16: -+ ((u32 *) (info->pseudo_palette))[regno] = v; -+ break; -+ case 24: -+ case 32: -+ ((u32 *) (info->pseudo_palette))[regno] = v; -+ break; -+ } -+ return 0; -+ } -+ return 0; -+} -+ -+ /* -+ * Pan or Wrap the Display -+ * -+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag -+ */ -+ -+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){ -+ if (var->vmode & FB_VMODE_YWRAP) { -+ if (var->yoffset < 0 -+ || var->yoffset >= info->var.yres_virtual -+ || var->xoffset) -+ return -EINVAL; -+ } else { -+ if (var->xoffset + var->xres > info->var.xres_virtual || -+ var->yoffset + var->yres > info->var.yres_virtual) -+ return -EINVAL; -+ } -+ info->var.xoffset = var->xoffset; -+ info->var.yoffset = var->yoffset; -+ if (var->vmode & FB_VMODE_YWRAP) -+ info->var.vmode |= FB_VMODE_YWRAP; -+ else -+ info->var.vmode &= ~FB_VMODE_YWRAP; -+ return 0; -+} -+ -+/* -+ * Most drivers don't need their own mmap function -+ */ -+ -+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){ -+ unsigned long page, pos; -+ unsigned long start = vma->vm_start; -+ unsigned long size = vma->vm_end-vma->vm_start; -+ printk("mmap : %ld %ld\n", size, info->fix.smem_len); -+ //if (size > info->fix.smem_len){ -+ // return -EINVAL; -+ //} -+ printk("MMAP2\n"); -+ pos = (unsigned long) info->screen_base; -+ while (size > 0) { -+ page = page_to_pfn(vmalloc_to_page((void *)pos)); -+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) -+ return -EAGAIN; -+ start += PAGE_SIZE; -+ pos += PAGE_SIZE; -+ if (size > PAGE_SIZE) -+ size -= PAGE_SIZE; -+ else -+ size = 0; -+ } -+ return 0; -+} -+ -+ -+ -+ -+ -+// our timer -+struct timer_list foxfb_timer; -+ -+ -+// the prototype for the callback -+static void foxfb_timer_callback(unsigned long ptr); -+ -+ -+// setup the mmc timer -+static void foxfb_timer_setup(void){ -+ init_timer(&foxfb_timer); -+ foxfb_timer.function = foxfb_timer_callback; -+ foxfb_timer.data = 0; -+ foxfb_timer.expires = jiffies + ( HZ / refreshrate); -+ add_timer(&foxfb_timer); -+}; -+ -+ -+// the timer callback function that detects if the card status has changed -+static void foxfb_timer_callback(unsigned long ptr){ -+ del_timer(&foxfb_timer); -+ FOXVHDL_blit(videomemory); -+ foxfb_timer_setup(); -+}; -+ -+ -+static void foxfb_platform_release(struct device *device){ -+ // This is called when the reference count goes to zero. -+} -+ -+ -+static int __init foxfb_probe(struct platform_device *dev){ -+ struct fb_info *info; -+ int retval = -ENOMEM; -+ -+ if (!(videomemory = vmalloc(videomemorysize))) -+ return retval; -+ -+ memset(videomemory, 0, videomemorysize); -+ -+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev); -+ if (!info) -+ goto err; -+ -+ info->screen_base = (char*)videomemory; -+ info->fbops = &foxfb_ops; -+ info->fix.smem_len = videomemorysize; -+ retval = fb_find_mode(&info->var, info, NULL, -+ NULL, 0, NULL, 8); -+ -+ if (!retval || (retval == 4)) -+ info->var = foxfb_default; -+ -+ info->fix = foxfb_fix; -+ info->pseudo_palette = info->par; -+ info->par = NULL; -+ info->flags = FBINFO_FLAG_DEFAULT; -+ -+ retval = fb_alloc_cmap(&info->cmap, 256, 0); -+ if (retval < 0) -+ goto err1; -+ -+ retval = register_framebuffer(info); -+ if (retval < 0) -+ goto err2; -+ platform_set_drvdata(dev, info); -+ -+ printk(KERN_INFO -+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n", -+ info->node, videomemorysize >> 10); -+ -+ -+ //FOXVHDL_blit(videomemory); -+ foxfb_timer_setup(); -+ return 0; -+err2: -+ fb_dealloc_cmap(&info->cmap); -+err1: -+ framebuffer_release(info); -+err: -+ vfree(videomemory); -+ return retval; -+} -+ -+static int foxfb_remove(struct platform_device *dev) -+{ -+ struct fb_info *info = platform_get_drvdata(dev); -+ -+ if (info) { -+ unregister_framebuffer(info); -+ vfree(videomemory); -+ framebuffer_release(info); -+ } -+ return 0; -+} -+ -+static struct platform_driver foxfb_driver = { -+ .probe = foxfb_probe, -+ .remove = foxfb_remove, -+ .driver = { -+ .name = "foxfb", -+ }, -+}; -+ -+static struct platform_device foxfb_device = { -+ .name = "foxfb", -+ .id = 0, -+ .dev = { -+ .release = foxfb_platform_release, -+ } -+}; -+ -+static int __init foxfb_init(void) -+{ -+ int ret = 0; -+ refreshrate = 8; -+ printk(KERN_INFO "fb: Initialising framebuffer\n"); -+ -+ FOXVHDL_init(); -+ -+ ret = platform_driver_register(&foxfb_driver); -+ -+ if (!ret) { -+ ret = platform_device_register(&foxfb_device); -+ if (ret) -+ platform_driver_unregister(&foxfb_driver); -+ } -+ fb_started = 1; -+ return ret; -+} -+ -+static void __exit foxfb_exit(void) -+{ -+ platform_device_unregister(&foxfb_device); -+ platform_driver_unregister(&foxfb_driver); -+} -+ -+module_exit(foxfb_exit); -+module_init(foxfb_init); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("K. John '2B|!2B' Crispin"); -+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver"); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,20 @@ -+// prototypes for foxbone compliant modules -+ -+extern unsigned int FOXBONE_release; -+extern unsigned int FOXBONE_application1; -+extern unsigned int FOXBONE_application2; -+extern unsigned int FOXBONE_application3; -+ -+void foxbone_write(unsigned int add, unsigned int data); -+ -+unsigned int foxbone_read(unsigned int add); -+ -+void foxbone_write_next(unsigned data); -+ -+unsigned int foxbone_read_next(void); -+ -+void foxbone_initialise_bus(void); -+ -+void foxbone_lock(void); -+ -+void foxbone_unlock(void); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,691 @@ -+/* -+ foxvhdlfb.c -+ Linux Kernel Driver for FoxBone FrameBuffer on FOX VHDL Board -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/errno.h> -+#include <linux/string.h> -+#include <linux/mm.h> -+#include <linux/tty.h> -+#include <linux/slab.h> -+#include <linux/vmalloc.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+ -+#include <asm/uaccess.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+ -+#include "foxbone.h" -+ -+ -+#if 0 -+#define DBG(x) x -+#else -+#define DBG(x) -+#endif -+ -+ -+/* -+|| -+|| FOXVHDL CTL functions -+|| -+*/ -+ -+ -+static unsigned char FOXVHDL_current_bank = 0xff; -+ -+static unsigned char blitting = 1; -+ -+static unsigned char refreshrate = 6; -+ -+ -+ -+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) { -+ // translate the three color passed in a single 16 bit color word -+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3); -+ return result; -+} -+ -+ -+ -+ -+// wait until the videostate pin has the wanted value -+void FOXVHDL_wait_videostate(unsigned char wait_state){ -+/* unsigned char vid_state = 0; -+ unsigned int max_error = 0xffff; -+ //printk("Start wait\n"); -+ do { -+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState); -+ max_error--; -+ } while((vid_state != wait_state)&&(max_error > 10)); -+ */ -+ DBG(if(max_error < 11){printk("Stop wait\n");};) -+}; -+ -+ -+// choose the bank that we want to display -+// OG5 == 0 --> Bank0 -+// OG5 == 1 --> Bank1 -+void FOXVHDL_set_bank(unsigned char bank){ -+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);) -+ if(FOXVHDL_current_bank == bank){ -+ return; -+ }; -+ -+ DBG(printk("FOXVHDL_set_bank\n");) -+ -+ FOXVHDL_current_bank = bank; -+ foxbone_write(0x7001, FOXVHDL_current_bank); -+ -+ -+}; -+ -+ -+// blit the bank -+void FOXVHDL_swap_bank(void){ -+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1)); -+}; -+ -+ -+// initialise the I/O pins -+void FOXVHDL_init(void){ -+ DBG(printk("FOXVHDL_init\n");) -+ -+ FOXVHDL_current_bank = 0; -+ -+ FOXVHDL_set_bank(1); -+ -+}; -+ -+/* -+|| -+|| FOXVHDL IMAGE FUNCTIONS -+|| -+*/ -+#define Fox_line_WriteData (1<<2) -+ -+// for performance reasons, we do not use the foxbone access functions here -+// we rather use an optimised algorithm. blitting now only takes about 6 ms. -+// meaning we can that effectivley achieve 17 frame. however the refresh rate by -+// default is 4 fps -+ -+#if 0 -+#define DBG_TIMER(x) x -+#else -+#define DBG_TIMER(x) -+#endif -+ -+#if 0 -+#define DOUBLE_DATA_RATE -+#endif -+ -+void FOXVHDL_blit(unsigned short int *image){ -+ unsigned long i; -+ unsigned int fb_ctl_reg; -+ -+ if(blitting){ -+ foxbone_lock(); -+ DBG_TIMER(unsigned long j = jiffies;) -+ // reset the address pointer -+ fb_ctl_reg = foxbone_read(0x7001); -+ fb_ctl_reg |= (1<<4); -+ foxbone_write(0x7001, fb_ctl_reg); -+ fb_ctl_reg &= ~(1<<4); -+ foxbone_write(0x7001, fb_ctl_reg); -+ -+ foxbone_write(0x7000, image[0]); -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir); -+ *R_GEN_CONFIG = genconfig_shadow; -+ -+ *R_PORT_G_DATA = port_g_data_shadow = (port_g_data_shadow & 0xff0000ff); -+ -+ -+#ifdef DOUBLE_DATA_RATE -+ -+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff); -+ for(i = 1; i < 640 * 400; i+=2){ -+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8 | Fox_line_WriteData; -+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i+1]<<8; -+ }; -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData; -+ -+#else -+ -+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData; -+ for(i = 1; i < 640 * 400; i++){ -+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8; -+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData; -+ }; -+#endif -+ foxbone_unlock(); -+ FOXVHDL_swap_bank(); -+ DBG_TIMER(printk("%ld\n", jiffies - j);) -+ -+ }; -+}; -+ -+ -+ -+ -+ -+ -+/* -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|| -+|| FRAMEBUFFER CODE -+|| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| -+ -+*/ -+ -+ -+ -+ -+#define VIDEOMEMSIZE (640 * 400 * 2) //512K -+ -+static void *videomemory; -+static u_long videomemorysize = VIDEOMEMSIZE; -+ -+static unsigned char fb_started = 0; -+ -+static unsigned char fb_update = 0; -+ -+static unsigned char fb_mmap_enable = 0; -+ -+static struct fb_var_screeninfo foxfb_default __initdata = { -+ .xres = 640, -+ .yres = 400, -+ .xres_virtual = 640, -+ .yres_virtual = 400, -+ .bits_per_pixel = 16, -+ .red = { 0, 5, 0 }, -+ .green = { 5, 6, 0 }, -+ .blue = { 11, 5, 0 }, -+ .activate = FB_ACTIVATE_NOW, -+ .height = -1, -+ .width = -1, -+ .vmode = FB_VMODE_NONINTERLACED, -+}; -+ -+static struct fb_fix_screeninfo foxfb_fix __initdata = { -+ .id = "FOX-VHDL FB", -+ .type = FB_TYPE_PACKED_PIXELS, -+ .visual = FB_VISUAL_TRUECOLOR, -+ .xpanstep = 1, -+ .ypanstep = 1, -+ .ywrapstep = 1, -+ .accel = FB_ACCEL_NONE, -+}; -+ -+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); -+static int foxfb_set_par(struct fb_info *info); -+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info); -+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); -+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma); -+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); -+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); -+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image); -+ -+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+ -+static struct fb_ops foxfb_ops = { -+ .fb_check_var = foxfb_check_var, -+ .fb_set_par = foxfb_set_par, -+ .fb_setcolreg = foxfb_setcolreg, -+ -+ .fb_pan_display = foxfb_pan_display, -+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect, -+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea, -+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit, -+ .fb_mmap = foxfb_mmap, -+ .fb_ioctl = foxfb_ioctl, -+}; -+ -+// this function is defined in fbmem.c -+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+ -+// this should be a free one -+#define FOX_FBIOGET_SCREEN 0x4642 -+#define FOX_FBBLIT 0x4643 -+#define FOX_FB_RATE 0x4645 -+#define FOX_FB_TFT 0x4646 -+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){ -+ void __user *argp = (void __user *)arg; -+ unsigned int fb_ctl_reg; -+ switch(cmd){ -+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space -+ case FOX_FBIOGET_SCREEN: -+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){ -+ return 0; -+ } else { -+ return -1; -+ }; -+ case FOX_FBBLIT: -+ fb_ctl_reg = foxbone_read(0x7001); -+ if(arg){ -+ printk("Enable FB\n"); -+ fb_ctl_reg &= ~(1<<1); -+ } else { -+ printk("Disable FB\n"); -+ fb_ctl_reg |= (1<<1); -+ }; -+ blitting = arg; -+ foxbone_write(0x7001, fb_ctl_reg); -+ break; -+ case FOX_FB_RATE: -+ if((arg > 9) || (arg < 1)){ -+ printk("fb0 : Illegal refreshrate\n"); -+ break; -+ }; -+ refreshrate = arg; -+ printk("fb0 : new refreshrate\n"); -+ break; -+ case FOX_FB_TFT: -+ fb_ctl_reg = foxbone_read(0x7001); -+ if(arg){ -+ printk("Enable TFT\n"); -+ fb_ctl_reg |= (1<<3); -+ } else { -+ printk("Disable TFT\n"); -+ fb_ctl_reg &= ~(1<<3); -+ }; -+ foxbone_write(0x7001, fb_ctl_reg); -+ break; -+ default: -+ return fb_ioctl(inode, file, cmd, arg); -+ }; -+ return 0; -+}; -+ -+// TODO add our own optimized code here -+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){ -+ cfb_fillrect(info, rect); -+ fb_update = 1; -+}; -+ -+ -+// TODO add our own optimized code here -+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){ -+ cfb_copyarea(info, area); -+ fb_update = 1; -+}; -+ -+// TODO add our own optimized code here -+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){ -+ cfb_imageblit(info, image); -+ fb_update = 1; -+}; -+ -+ -+/* -+ * Internal routines -+ */ -+ -+static u_long get_line_length(int xres_virtual, int bpp) -+{ -+ u_long length; -+ -+ length = xres_virtual * bpp; -+ length = (length + 31) & ~31; -+ length >>= 3; -+ return (length); -+} -+ -+ /* -+ * Setting the video mode has been split into two parts. -+ * First part, xxxfb_check_var, must not write anything -+ * to hardware, it should only verify and adjust var. -+ * This means it doesn't alter par but it does use hardware -+ * data from it to check this var. -+ */ -+ -+static int foxfb_check_var(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ u_long line_length; -+ -+ if (var->vmode & FB_VMODE_CONUPDATE) { -+ var->vmode |= FB_VMODE_YWRAP; -+ var->xoffset = info->var.xoffset; -+ var->yoffset = info->var.yoffset; -+ } -+ -+ var->xres = 640; -+ var->yres = 400; -+ -+ var->bits_per_pixel = 16; -+ -+ if (var->xres_virtual < var->xoffset + var->xres) -+ var->xres_virtual = var->xoffset + var->xres; -+ if (var->yres_virtual < var->yoffset + var->yres) -+ var->yres_virtual = var->yoffset + var->yres; -+ -+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); -+ if (line_length * var->yres_virtual > videomemorysize) -+ return -ENOMEM; -+ -+ var->red.offset = 0; -+ var->red.length = 5; -+ var->green.offset = 5; -+ var->green.length = 6; -+ var->blue.offset = 11; -+ var->blue.length = 5; -+ var->transp.offset = 0; -+ var->transp.length = 0; -+ var->red.msb_right = 0; -+ var->green.msb_right = 0; -+ var->blue.msb_right = 0; -+ var->transp.msb_right = 0; -+ -+ return 0; -+} -+ -+ -+ -+/* This routine actually sets the video mode. It's in here where we -+ * the hardware state info->par and fix which can be affected by the -+ * change in par. For this driver it doesn't do much. -+ */ -+static int foxfb_set_par(struct fb_info *info){ -+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel); -+ return 0; -+} -+ -+/* -+ * Set a single color register. The values supplied are already -+ * rounded down to the hardware's capabilities (according to the -+ * entries in the var structure). Return != 0 for invalid regno. -+ */ -+ -+ -+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){ -+ if (regno >= 256) /* no. of hw registers */ -+ return 1; -+ -+ /* grayscale works only partially under directcolor */ -+ if (info->var.grayscale) { -+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */ -+ red = green = blue = -+ (red * 77 + green * 151 + blue * 28) >> 8; -+ } -+ -+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) -+ switch (info->fix.visual) { -+ case FB_VISUAL_TRUECOLOR: -+ case FB_VISUAL_PSEUDOCOLOR: -+ red = CNVT_TOHW(red, info->var.red.length); -+ green = CNVT_TOHW(green, info->var.green.length); -+ blue = CNVT_TOHW(blue, info->var.blue.length); -+ transp = CNVT_TOHW(transp, info->var.transp.length); -+ break; -+ case FB_VISUAL_DIRECTCOLOR: -+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */ -+ green = CNVT_TOHW(green, 8); -+ blue = CNVT_TOHW(blue, 8); -+ /* hey, there is bug in transp handling... */ -+ transp = CNVT_TOHW(transp, 8); -+ break; -+ } -+#undef CNVT_TOHW -+ /* Truecolor has hardware independent palette */ -+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) { -+ u32 v; -+ -+ if (regno >= 16) -+ return 1; -+ -+ v = (red << info->var.red.offset) | -+ (green << info->var.green.offset) | -+ (blue << info->var.blue.offset) | -+ (transp << info->var.transp.offset); -+ switch (info->var.bits_per_pixel) { -+ case 8: -+ break; -+ case 16: -+ ((u32 *) (info->pseudo_palette))[regno] = v; -+ break; -+ case 24: -+ case 32: -+ ((u32 *) (info->pseudo_palette))[regno] = v; -+ break; -+ } -+ return 0; -+ } -+ return 0; -+} -+ -+ -+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){ -+ if (var->vmode & FB_VMODE_YWRAP) { -+ if (var->yoffset < 0 -+ || var->yoffset >= info->var.yres_virtual -+ || var->xoffset) -+ return -EINVAL; -+ } else { -+ if (var->xoffset + var->xres > info->var.xres_virtual || -+ var->yoffset + var->yres > info->var.yres_virtual) -+ return -EINVAL; -+ } -+ info->var.xoffset = var->xoffset; -+ info->var.yoffset = var->yoffset; -+ if (var->vmode & FB_VMODE_YWRAP) -+ info->var.vmode |= FB_VMODE_YWRAP; -+ else -+ info->var.vmode &= ~FB_VMODE_YWRAP; -+ return 0; -+} -+ -+ -+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){ -+ unsigned long page, pos; -+ unsigned long start = vma->vm_start; -+ unsigned long size = vma->vm_end-vma->vm_start; -+ fb_mmap_enable = 1; -+ printk("mmap : %ld %ld\n", size, (long)info->fix.smem_len); -+ //if (size > info->fix.smem_len){ -+ // return -EINVAL; -+ //} -+ pos = (unsigned long) info->screen_base; -+ while (size > 0) { -+ page = page_to_pfn(vmalloc_to_page((void *)pos)); -+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) -+ return -EAGAIN; -+ start += PAGE_SIZE; -+ pos += PAGE_SIZE; -+ if (size > PAGE_SIZE) -+ size -= PAGE_SIZE; -+ else -+ size = 0; -+ } -+ return 0; -+} -+ -+ -+// our timer -+struct timer_list foxfb_timer; -+ -+// are we currently blitting ? -+static unsigned char we_are_blitting = 0; -+ -+// the prototype for the callback -+static void foxfb_timer_callback(unsigned long ptr); -+ -+ -+static void tasklet_foxfb(unsigned long data); -+DECLARE_TASKLET(tl_foxfb_descr, tasklet_foxfb, 0L); -+static void tasklet_foxfb(unsigned long data){ -+ if(fb_update || fb_mmap_enable ){ -+ FOXVHDL_blit(videomemory); -+ } else { -+ DBG(printk("FBWAIT");) -+ }; -+ we_are_blitting = 0; -+ fb_update = 0; -+} -+ -+ -+// setup the fb timer -+static void foxfb_timer_setup(void){ -+ init_timer(&foxfb_timer); -+ foxfb_timer.function = foxfb_timer_callback; -+ foxfb_timer.data = 0; -+ foxfb_timer.expires = jiffies + ( HZ / refreshrate); -+ add_timer(&foxfb_timer); -+}; -+ -+ -+// the timer callback function that detects if the card status has changed -+static void foxfb_timer_callback(unsigned long ptr){ -+ if((!we_are_blitting)){ -+ we_are_blitting = 1; -+ del_timer(&foxfb_timer); -+ tasklet_schedule(&tl_foxfb_descr); -+ foxfb_timer_setup(); -+ }; -+}; -+ -+ -+static void foxfb_platform_release(struct device *device){ -+ // This is called when the reference count goes to zero. -+} -+ -+ -+static int __init foxfb_probe(struct platform_device *dev){ -+ struct fb_info *info; -+ int retval = -ENOMEM; -+ -+ if (!(videomemory = vmalloc(videomemorysize))) -+ return retval; -+ -+ memset(videomemory, 0, videomemorysize); -+ -+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev); -+ if (!info) -+ goto err; -+ -+ info->screen_base = (char*)videomemory; -+ info->fbops = &foxfb_ops; -+ info->fix.smem_len = videomemorysize; -+ retval = fb_find_mode(&info->var, info, NULL, -+ NULL, 0, NULL, 8); -+ -+ if (!retval || (retval == 4)) -+ info->var = foxfb_default; -+ -+ info->fix = foxfb_fix; -+ info->pseudo_palette = info->par; -+ info->par = NULL; -+ info->flags = FBINFO_FLAG_DEFAULT; -+ //info->cursor.mode &= ~CURSOR_BLINK; -+ retval = fb_alloc_cmap(&info->cmap, 256, 0); -+ if (retval < 0) -+ goto err1; -+ -+ retval = register_framebuffer(info); -+ if (retval < 0) -+ goto err2; -+ platform_set_drvdata(dev, info); -+ -+ printk(KERN_INFO -+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n", -+ info->node, videomemorysize >> 10); -+ -+ -+ //FOXVHDL_blit(videomemory); -+ foxfb_timer_setup(); -+ return 0; -+err2: -+ fb_dealloc_cmap(&info->cmap); -+err1: -+ framebuffer_release(info); -+err: -+ vfree(videomemory); -+ return retval; -+} -+ -+static int foxfb_remove(struct platform_device *dev) -+{ -+ struct fb_info *info = platform_get_drvdata(dev); -+ -+ if (info) { -+ unregister_framebuffer(info); -+ vfree(videomemory); -+ framebuffer_release(info); -+ } -+ return 0; -+} -+ -+static struct platform_driver foxfb_driver = { -+ .probe = foxfb_probe, -+ .remove = foxfb_remove, -+ .driver = { -+ .name = "foxfb", -+ }, -+}; -+ -+static struct platform_device foxfb_device = { -+ .name = "foxfb", -+ .id = 0, -+ .dev = { -+ .release = foxfb_platform_release, -+ } -+}; -+ -+static int __init foxfb_init(void) -+{ -+ int ret = 0; -+ refreshrate = 8; -+ printk(KERN_INFO "fb: Initialising framebuffer\n"); -+ -+ FOXVHDL_init(); -+ -+ ret = platform_driver_register(&foxfb_driver); -+ -+ if (!ret) { -+ ret = platform_device_register(&foxfb_device); -+ if (ret) -+ platform_driver_unregister(&foxfb_driver); -+ } -+ fb_started = 1; -+ return ret; -+} -+ -+static void __exit foxfb_exit(void) -+{ -+ platform_device_unregister(&foxfb_device); -+ platform_driver_unregister(&foxfb_driver); -+} -+ -+module_exit(foxfb_exit); -+module_init(foxfb_init); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("K. John '2B|!2B' Crispin"); -+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver"); -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,5 @@ -+# Makefile for fox_vhdl drivers -+# 23.04.2006 <mailto:john@phrozen.org> -+ -+# the fox_vhdl_framebuffer driver -+obj-$(CONFIG_FOX_VHDL_FB) += foxvhdlfb.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig linux-2.6.19.2/drivers/fox-vhdl/Kconfig ---- linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,274 @@ -+menu "Acmesystems FPGA" -+ -+config FOX_VHDL -+ bool "Support for FOX-VHDL Board" -+ default n -+ -+config FOX_FPGA -+ bool "FPGA flash module" -+ depends on FOX_VHDL -+ help -+ Adds the module needed to flash the fpga from the FOX -+ -+config FOXBONE -+ bool "Basic FOXBONE support" -+ depends on FOX_VHDL -+ help -+ Include this to get basic FOXBONE support -+ -+config VT -+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED -+ select INPUT -+ default y if !VIOCONS -+ ---help--- -+ If you say Y here, you will get support for terminal devices with -+ display and keyboard devices. These are called "virtual" because you -+ can run several virtual terminals (also called virtual consoles) on -+ one physical terminal. This is rather useful, for example one -+ virtual terminal can collect system messages and warnings, another -+ one can be used for a text-mode user session, and a third could run -+ an X session, all in parallel. Switching between virtual terminals -+ is done with certain key combinations, usually Alt-<function key>. -+ -+ The setterm command ("man setterm") can be used to change the -+ properties (such as colors or beeping) of a virtual terminal. The -+ man page console_codes(4) ("man console_codes") contains the special -+ character sequences that can be used to change those properties -+ directly. The fonts used on virtual terminals can be changed with -+ the setfont ("man setfont") command and the key bindings are defined -+ with the loadkeys ("man loadkeys") command. -+ -+ You need at least one virtual terminal device in order to make use -+ of your keyboard and monitor. Therefore, only people configuring an -+ embedded system would want to say N here in order to save some -+ memory; the only way to log into such a system is then via a serial -+ or network connection. -+ -+ If unsure, say Y, or else you won't be able to do much with your new -+ shiny Linux system :-) -+ -+ -+menu "Framebuffer" -+depends on VT -+ -+config FB -+ bool "Support for frame buffer devices" -+ depends on VT -+ ---help--- -+ The frame buffer device provides an abstraction for the graphics -+ hardware. It represents the frame buffer of some video hardware and -+ allows application software to access the graphics hardware through -+ a well-defined interface, so the software doesn't need to know -+ anything about the low-level (hardware register) stuff. -+ -+ Frame buffer devices work identically across the different -+ architectures supported by Linux and make the implementation of -+ application programs easier and more portable; at this point, an X -+ server exists which uses the frame buffer device exclusively. -+ On several non-X86 architectures, the frame buffer device is the -+ only way to use the graphics hardware. -+ -+ The device is accessed through special device nodes, usually located -+ in the /dev directory, i.e. /dev/fb*. -+ -+ You need an utility program called fbset to make full use of frame -+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt> -+ and the Framebuffer-HOWTO at -+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more -+ information. -+ -+ Say Y here and to the driver for your graphics board below if you -+ are compiling a kernel for a non-x86 architecture. -+ -+ If you are compiling for the x86 architecture, you can say Y if you -+ want to play with it, but it is not essential. Please note that -+ running graphical applications that directly touch the hardware -+ (e.g. an accelerated X server) and that are not frame buffer -+ device-aware may cause unexpected results. If unsure, say N. -+ -+config FB_CFB_FILLRECT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_fillrect function for generic software rectangle -+ filling. This is used by drivers that don't provide their own -+ (accelerated) version. -+ -+config FB_CFB_COPYAREA -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_copyarea function for generic software area copying. -+ This is used by drivers that don't provide their own (accelerated) -+ version. -+ -+config FB_CFB_IMAGEBLIT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_imageblit function for generic software image -+ blitting. This is used by drivers that don't provide their own -+ (accelerated) version. -+config DUMMY_CONSOLE -+ bool "Dummy Console" -+ depends on FB -+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y -+ default n -+ -+config FRAMEBUFFER_CONSOLE -+ bool "Framebuffer Console support" -+ depends on FB -+ select CRC32 -+ help -+ Low-level framebuffer-based console driver. -+config LOGO -+ bool "Bootup logo" -+ depends on FB || SGI_NEWPORT_CONSOLE -+ help -+ Enable and select frame buffer bootup logos. -+ -+config LOGO_LINUX_CLUT224 -+ bool "Standard 224-color Linux logo" -+ depends on LOGO -+ default y -+config FONTS -+ bool "Select compiled-in fonts" -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ help -+ Say Y here if you would like to use fonts other than the default -+ your frame buffer console usually use. -+ -+ Note that the answer to this question won't directly affect the -+ kernel: saying N will just cause the configurator to skip all -+ the questions about foreign fonts. -+ -+ If unsure, say N (the default choices are safe). -+ -+config FONT_8x8 -+ bool "VGA 8x8 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the text console 80x50 (and higher) modes). -+ -+ Note that this is a poor quality font. The VGA 8x16 font is quite a -+ lot more readable. -+ -+ Given the resolution provided by the frame buffer device, answer N -+ here is safe. -+ -+config FONT_8x16 -+ bool "VGA 8x16 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the VGA text console 80x25 mode. -+ -+ If unsure, say Y. -+ -+ -+config FOX_VHDL_FB -+ bool "FOX_VHDL Framebuffer" -+ depends on FOXBONE -+ depends on FB -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ select VT_CONSOLE -+ select DUMMY_CONSOLE -+ select FRAMEBUFFER_CONSOLE -+ select FONTS -+ select LOGO -+ select LOGO_LINUX_CLUT224 -+ -+config NANOXKBD -+ bool "nano-X keyboard support" -+ default n -+ depends on FOX_VHDL_FB -+ help -+ Enable the keyboard driver patches for nano-X -+ -+ -+ -+#if FOX_VHDL_FB -+ #source "drivers/video/console/Kconfig" -+#endif -+ -+#if FOX_VHDL_FB -+# source "drivers/video/logo/Kconfig" -+#endif -+ -+endmenu -+ -+ -+config FOXBONE_IO -+ bool "FOXBONE I/O pins" -+ depends on FOXBONE -+ help -+ Include this to get access to the I/O pins of the foxbone -+ -+config FOXBONE_TIMEBASE -+ bool "FOXBONE Timebase" -+ depends on FOXBONE -+ help -+ Include this to get access to the timebase part of the fpga -+ -+config FOXBONE_MMC -+ bool "FOXBONE MMC/SD module" -+ depends on FOXBONE -+ help -+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board -+ -+config FOXBONE_PWM -+ bool "FOXBONE PWM module" -+ depends on FOXBONE -+ help -+ Include this to enable PWM support into the kernel -+ -+config FOXBONE_EVENT -+ bool "FOXBONE EVENT counter module" -+ depends on FOXBONE -+ help -+ Include this to enable foxbone event counter support -+ -+config FOXBONE_LOOPBACK -+ bool "FOXBONE Loopback module" -+ depends on FOXBONE -+ help -+ Include this to be able to load the loopback module, that you can base your own driver on -+ -+config FOXBONE_MULTIPLY -+ bool "FOXBONE Multiplier example" -+ depends on FOXBONE -+ help -+ Include this to use the 64 bit multiplier -+ -+menu "FOXBONE interrupt handlers" -+config FOXBONE_SAMPLE_ISR -+ bool "FOXBONE example interrupt handlers" -+ depends on FOXBONE -+ -+config FOXBONE_INT14 -+ bool "Int 14 - bit 0 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR -+ -+config FOXBONE_INT31 -+ bool "Int 31 - bit 1 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR -+ -+endmenu -+ -+ -+config ETRAX_CMDLINE -+ string "Kernel command line" -+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0" -+ help -+ use if no framebuffer is enabled console=ttyS0 -+ use if framebuffer is enabled console=tty0 -+ -+endmenu -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_NANOXKBD) += nanoxkbd.o -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c ---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,173 @@ -+/* -+ nanoxkbd.c -+ Linux Kernel Driver for Nanox Keyboard driver for FOX VHDL Board framebuffer -+ (based on FoxBone protocol interface specifications rel 0.7) -+ For more info see: http://www.acmesystems.it/?id=120 -+ Author: John Crispin -+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz) -+ -+ This is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This example is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ To have a copy of the GNU General Public License write to the Free Software -+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <linux/vmalloc.h> -+#include <linux/ioport.h> -+#include <linux/init.h> -+#include <linux/genhd.h> -+ -+#define DEV_NAME "keyboard" -+#define DEV_MAJOR 195 -+ -+ -+unsigned char nanoxkbd_is_open = 0; -+ -+#define MAX_KEYS 128 -+unsigned int keys[MAX_KEYS]; -+unsigned char keys_count = 0; -+unsigned char keys_pos = 0; -+ -+#define IOCTL_NANOXKBD_GET 0x7878 -+ -+unsigned char nanoxkbd_add(unsigned int keycode){ -+ if(nanoxkbd_is_open){ -+ if(keys_count < MAX_KEYS){ -+ keys[(keys_pos + keys_count) % MAX_KEYS] = keycode; -+ keys_count++; -+ printk("got key %d, %d, %d\n", keycode, keys_pos, keys_count); -+ }; -+ return 1; -+ }; -+ return 0; -+}; -+ -+// the app has send us some control data -+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ -+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); -+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); -+ int retval = 0; -+ switch (cmd) { -+ case IOCTL_NANOXKBD_GET: -+ if(keys_count > 0){ -+ keys_count--; -+ copy_to_user((char*)arg, (char*)&keys[keys_pos], sizeof(unsigned int)); -+ keys_pos++; -+ if(keys_pos >= MAX_KEYS){ -+ keys_pos = 0; -+ }; -+ retval = 1; -+ }; -+ break; -+ -+ default: -+ printk("nanoxkbd: unknown ioctl\n"); -+ break; -+ } -+ -+ return retval; -+}; -+ -+ -+ -+static int module_open(struct inode *inode, struct file *file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // we only supprt minor 0 at the moment -+ if(dev_minor != 0){ -+ printk("nanoxkbd: trying to access unknown minor device -> %d\n", dev_minor); -+ return -ENODEV; -+ } -+ -+ // check if another app is currently using the device -+ if(nanoxkbd_is_open) { -+ printk("nanoxkbd: Device with minor ID %d already in use\n", dev_minor); -+ return -EBUSY; -+ } -+ nanoxkbd_is_open = 1; -+ -+ // more flaming -+ printk("nanoxkbd: Minor %d has been opened\n", dev_minor); -+ return 0; -+}; -+ -+ -+// gets called when an app closes the device -+static int module_close(struct inode * inode, struct file * file){ -+ // Which minor device is the user trying to access ? -+ unsigned int dev_minor = MINOR(inode->i_rdev); -+ -+ // remember that the device has been closed -+ nanoxkbd_is_open = 0; -+ -+ -+ // more flaming -+ printk("nanoxkbd: Minor %d has been closed\n", dev_minor); -+ -+ return 0; -+}; -+ -+// so the kernel knows which functions to access for a given operation -+struct file_operations nanoxkbd_module_fops = { -+ ioctl: module_ioctl, -+ open: module_open, -+ release: module_close -+}; -+ -+ -+// module gets loaded into kernel / char dev is registered -+static int __init mod_init(void){ -+ // flame the kprintk -+ printk("nanoxkbd: FOX-VHDL FPGA io module\n"); -+ //printk("nanoxkbd: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n"); -+ //printk("nanoxkbd: Starting ...\n"); -+ -+ // register the character device -+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &nanoxkbd_module_fops)) { -+ printk( "nanoxkbd: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); -+ return( -ENODEV ); -+ }; -+ -+ -+ // remember that the driver has been opened -+ nanoxkbd_is_open = 0; -+ printk("nanoxkbd: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); -+ return 0; -+} -+ -+ -+// we are done so shut everything down -+static void __exit mod_exit(void){ -+ printk( "nanoxkbd: Cleanup\n" ); -+ // tell the kernel that the device is not needed anymore -+ unregister_chrdev(DEV_MAJOR, DEV_NAME); -+ -+} -+ -+module_init (mod_init); -+module_exit (mod_exit); -+ -+ -+ -+ -+ -+ -diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile linux-2.6.19.2/drivers/fox-vhdl/Makefile ---- linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/drivers/fox-vhdl/Makefile 2007-06-17 02:46:15.000000000 +0200 -@@ -0,0 +1,13 @@ -+# -+# Makefile for the i2c core. -+# -+obj-$(CONFIG_FOXBONE) += foxbone/ -+obj-$(CONFIG_FOX_VHDL_FB) += fox_vhdl_fb/ -+obj-$(CONFIG_FOX_FPGA) += fox_fpga_flash/ -+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm/ -+obj-$(CONFIG_FOXBONE_IO) += fox_io/ -+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase/ -+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback/ -+obj-$(CONFIG_FOXBONE_EVENT) += fox_event/ -+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply/ -+obj-$(CONFIG_NANOXKBD) += keyboard/ ---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200 -+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200 -@@ -1,244 +1,274 @@ --# --# For a description of the syntax of this configuration file, --# see the Configure script. --# -+menu "Acmesystems FPGA" - --mainmenu "Linux/CRIS Kernel Configuration" -- --config MMU -- bool -- default y -- --config RWSEM_GENERIC_SPINLOCK -- bool -- default y -- --config RWSEM_XCHGADD_ALGORITHM -- bool -- --config GENERIC_IOMAP -- bool -- default y -- --config GENERIC_FIND_NEXT_BIT -- bool -- default y -- --config GENERIC_HWEIGHT -- bool -+config FOX_VHDL -+ bool "Support for FOX-VHDL Board" -+ default n -+ -+config FOX_FPGA -+ bool "FPGA flash module" -+ depends on FOX_VHDL -+ help -+ Adds the module needed to flash the fpga from the FOX -+ -+config FOXBONE -+ bool "Basic FOXBONE support" -+ depends on FOX_VHDL -+ help -+ Include this to get basic FOXBONE support -+ -+config VT -+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED -+ select INPUT -+ default y if !VIOCONS -+ ---help--- -+ If you say Y here, you will get support for terminal devices with -+ display and keyboard devices. These are called "virtual" because you -+ can run several virtual terminals (also called virtual consoles) on -+ one physical terminal. This is rather useful, for example one -+ virtual terminal can collect system messages and warnings, another -+ one can be used for a text-mode user session, and a third could run -+ an X session, all in parallel. Switching between virtual terminals -+ is done with certain key combinations, usually Alt-<function key>. -+ -+ The setterm command ("man setterm") can be used to change the -+ properties (such as colors or beeping) of a virtual terminal. The -+ man page console_codes(4) ("man console_codes") contains the special -+ character sequences that can be used to change those properties -+ directly. The fonts used on virtual terminals can be changed with -+ the setfont ("man setfont") command and the key bindings are defined -+ with the loadkeys ("man loadkeys") command. -+ -+ You need at least one virtual terminal device in order to make use -+ of your keyboard and monitor. Therefore, only people configuring an -+ embedded system would want to say N here in order to save some -+ memory; the only way to log into such a system is then via a serial -+ or network connection. -+ -+ If unsure, say Y, or else you won't be able to do much with your new -+ shiny Linux system :-) -+ -+ -+menu "Framebuffer" -+depends on VT -+ -+config FB -+ bool "Support for frame buffer devices" -+ depends on VT -+ ---help--- -+ The frame buffer device provides an abstraction for the graphics -+ hardware. It represents the frame buffer of some video hardware and -+ allows application software to access the graphics hardware through -+ a well-defined interface, so the software doesn't need to know -+ anything about the low-level (hardware register) stuff. -+ -+ Frame buffer devices work identically across the different -+ architectures supported by Linux and make the implementation of -+ application programs easier and more portable; at this point, an X -+ server exists which uses the frame buffer device exclusively. -+ On several non-X86 architectures, the frame buffer device is the -+ only way to use the graphics hardware. -+ -+ The device is accessed through special device nodes, usually located -+ in the /dev directory, i.e. /dev/fb*. -+ -+ You need an utility program called fbset to make full use of frame -+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt> -+ and the Framebuffer-HOWTO at -+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more -+ information. -+ -+ Say Y here and to the driver for your graphics board below if you -+ are compiling a kernel for a non-x86 architecture. -+ -+ If you are compiling for the x86 architecture, you can say Y if you -+ want to play with it, but it is not essential. Please note that -+ running graphical applications that directly touch the hardware -+ (e.g. an accelerated X server) and that are not frame buffer -+ device-aware may cause unexpected results. If unsure, say N. -+ -+config FB_CFB_FILLRECT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_fillrect function for generic software rectangle -+ filling. This is used by drivers that don't provide their own -+ (accelerated) version. -+ -+config FB_CFB_COPYAREA -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_copyarea function for generic software area copying. -+ This is used by drivers that don't provide their own (accelerated) -+ version. -+ -+config FB_CFB_IMAGEBLIT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_imageblit function for generic software image -+ blitting. This is used by drivers that don't provide their own -+ (accelerated) version. -+config DUMMY_CONSOLE -+ bool "Dummy Console" -+ depends on FB -+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y -+ default n -+ -+config FRAMEBUFFER_CONSOLE -+ bool "Framebuffer Console support" -+ depends on FB -+ select CRC32 -+ help -+ Low-level framebuffer-based console driver. -+config LOGO -+ bool "Bootup logo" -+ depends on FB || SGI_NEWPORT_CONSOLE -+ help -+ Enable and select frame buffer bootup logos. -+ -+config LOGO_LINUX_CLUT224 -+ bool "Standard 224-color Linux logo" -+ depends on LOGO - default y -- --config GENERIC_CALIBRATE_DELAY -- bool -- default y -- --config IRQ_PER_CPU -- bool -- default y -- --config CRIS -- bool -- default y -- --source "init/Kconfig" -- --menu "General setup" -- --source "fs/Kconfig.binfmt" -- --config GENERIC_HARDIRQS -- bool -- default y -- --config SMP -- bool "SMP" -- help -- SMP support. Always Say N. -- --config NR_CPUS -- int -- depends on SMP -- default 2 -- --config SCHED_MC -- bool "Multi-core scheduler support" -- depends on SMP -- default y -- help -- Multi-core scheduler support improves the CPU scheduler's decision -- making when dealing with multi-core CPU chips at a cost of slightly -- increased overhead in some places. If unsure say N here. -- --config ETRAX_CMDLINE -- string "Kernel command line" -- default "root=/dev/mtdblock3" -- help -- Pass additional commands to the kernel. -- --config ETRAX_WATCHDOG -- bool "Enable ETRAX watchdog" -- help -- Enable the built-in watchdog timer support on ETRAX based embedded -- network computers. -- --config ETRAX_WATCHDOG_NICE_DOGGY -- bool "Disable watchdog during Oops printouts" -- depends on ETRAX_WATCHDOG -- help -- By enabling this you make sure that the watchdog does not bite while -- printing oopses. Recommended for development systems but not for -- production releases. -- --config ETRAX_FAST_TIMER -- bool "Enable ETRAX fast timer API" -- help -- This options enables the API to a fast timer implementation using -- timer1 to get sub jiffie resolution timers (primarily one-shot -- timers). -- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. -- --config OOM_REBOOT -- bool "Enable reboot at out of memory" -- --source "kernel/Kconfig.preempt" --source "kernel/Kconfig.sched" -- --source mm/Kconfig -+config FONTS -+ bool "Select compiled-in fonts" -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ help -+ Say Y here if you would like to use fonts other than the default -+ your frame buffer console usually use. -+ -+ Note that the answer to this question won't directly affect the -+ kernel: saying N will just cause the configurator to skip all -+ the questions about foreign fonts. -+ -+ If unsure, say N (the default choices are safe). -+ -+config FONT_8x8 -+ bool "VGA 8x8 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the text console 80x50 (and higher) modes). -+ -+ Note that this is a poor quality font. The VGA 8x16 font is quite a -+ lot more readable. -+ -+ Given the resolution provided by the frame buffer device, answer N -+ here is safe. -+ -+config FONT_8x16 -+ bool "VGA 8x16 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the VGA text console 80x25 mode. -+ -+ If unsure, say Y. -+ -+ -+config FOX_VHDL_FB -+ bool "FOX_VHDL Framebuffer" -+ depends on FOXBONE -+ depends on FB -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ select VT_CONSOLE -+ select DUMMY_CONSOLE -+ select FRAMEBUFFER_CONSOLE -+ select FONTS -+ select LOGO -+ select LOGO_LINUX_CLUT224 -+ -+config NANOXKBD -+ bool "nano-X keyboard support" -+ default n -+ depends on FOX_VHDL_FB -+ help -+ Enable the keyboard driver patches for nano-X -+ -+ -+ -+#if FOX_VHDL_FB -+ #source "drivers/video/console/Kconfig" -+#endif -+ -+#if FOX_VHDL_FB -+# source "drivers/video/logo/Kconfig" -+#endif - - endmenu - --menu "Hardware setup" -- --choice -- prompt "Processor type" -- default ETRAX100LX - --config ETRAX100LX -- bool "ETRAX-100LX-v1" -+config FOXBONE_IO -+ bool "FOXBONE I/O pins" -+ depends on FOXBONE - help -- Support version 1 of the ETRAX 100LX. -+ Include this to get access to the I/O pins of the foxbone - --config ETRAX100LX_V2 -- bool "ETRAX-100LX-v2" -+config FOXBONE_TIMEBASE -+ bool "FOXBONE Timebase" -+ depends on FOXBONE - help -- Support version 2 of the ETRAX 100LX. -+ Include this to get access to the timebase part of the fpga - --config SVINTO_SIM -- bool "ETRAX-100LX-for-xsim-simulator" -+config FOXBONE_MMC -+ bool "FOXBONE MMC/SD module" -+ depends on FOXBONE - help -- Support the xsim ETRAX Simulator. -+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board - --config ETRAXFS -- bool "ETRAX-FS-V32" -+config FOXBONE_PWM -+ bool "FOXBONE PWM module" -+ depends on FOXBONE - help -- Support CRIS V32. -+ Include this to enable PWM support into the kernel - --config ETRAXFS_SIM -- bool "ETRAX-FS-V32-Simulator" -+config FOXBONE_EVENT -+ bool "FOXBONE EVENT counter module" -+ depends on FOXBONE - help -- Support CRIS V32 VCS simualtor. -+ Include this to enable foxbone event counter support - --endchoice -- --config ETRAX_ARCH_V10 -- bool -- default y if ETRAX100LX || ETRAX100LX_V2 -- default n if !(ETRAX100LX || ETRAX100LX_V2) -- --config ETRAX_ARCH_V32 -- bool -- default y if ETRAXFS || ETRAXFS_SIM -- default n if !(ETRAXFS || ETRAXFS_SIM) -- --config ETRAX_DRAM_SIZE -- int "DRAM size (dec, in MB)" -- default "8" -+config FOXBONE_LOOPBACK -+ bool "FOXBONE Loopback module" -+ depends on FOXBONE - help -- Size of DRAM (decimal in MB) typically 2, 8 or 16. -+ Include this to be able to load the loopback module, that you can base your own driver on - --config ETRAX_FLASH_BUSWIDTH -- int "Buswidth of NOR flash in bytes" -- default "2" -+config FOXBONE_MULTIPLY -+ bool "FOXBONE Multiplier example" -+ depends on FOXBONE - help -- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. -+ Include this to use the 64 bit multiplier - --config ETRAX_NANDFLASH_BUSWIDTH -- int "Buswidth of NAND flash in bytes" -- default "1" -- help -- Width in bytes of the NAND flash (1 or 2). -+menu "FOXBONE interrupt handlers" -+config FOXBONE_SAMPLE_ISR -+ bool "FOXBONE example interrupt handlers" -+ depends on FOXBONE -+ -+config FOXBONE_INT14 -+ bool "Int 14 - bit 0 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR - --config ETRAX_FLASH1_SIZE -- int "FLASH1 size (dec, in MB. 0 = Unknown)" -- default "0" -+config FOXBONE_INT31 -+ bool "Int 31 - bit 1 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR - --# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) --source arch/cris/arch/Kconfig -+endmenu - --endmenu -- --source "net/Kconfig" -- --# bring in ETRAX built-in drivers --menu "Drivers for built-in interfaces" --# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) --source arch/cris/arch/drivers/Kconfig - -+config ETRAX_CMDLINE -+ string "Kernel command line" -+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0" -+ help -+ use if no framebuffer is enabled console=ttyS0 -+ use if framebuffer is enabled console=tty0 -+ - endmenu -- --source "drivers/base/Kconfig" -- --# standard linux drivers --source "drivers/mtd/Kconfig" -- --source "drivers/parport/Kconfig" -- --source "drivers/pnp/Kconfig" -- --source "drivers/block/Kconfig" -- --source "drivers/md/Kconfig" -- --source "drivers/ide/Kconfig" -- --source "drivers/scsi/Kconfig" -- --source "drivers/ieee1394/Kconfig" -- --source "drivers/message/i2o/Kconfig" -- --source "drivers/net/Kconfig" -- --source "drivers/isdn/Kconfig" -- --source "drivers/telephony/Kconfig" -- --source "drivers/cdrom/Kconfig" -- --# --# input before char - char/joystick depends on it. As does USB. --# --source "drivers/input/Kconfig" -- --source "drivers/char/Kconfig" -- --#source drivers/misc/Config.in --source "drivers/media/Kconfig" -- --source "fs/Kconfig" -- --source "sound/Kconfig" -- --source "drivers/pcmcia/Kconfig" -- --source "drivers/pci/Kconfig" -- --source "drivers/usb/Kconfig" -- --source "arch/cris/Kconfig.debug" -- --source "security/Kconfig" -- --source "crypto/Kconfig" -- --source "lib/Kconfig" ---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200 -+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200 -@@ -1,244 +1,274 @@ --# --# For a description of the syntax of this configuration file, --# see the Configure script. --# -+menu "Acmesystems FPGA" - --mainmenu "Linux/CRIS Kernel Configuration" -- --config MMU -- bool -- default y -- --config RWSEM_GENERIC_SPINLOCK -- bool -- default y -- --config RWSEM_XCHGADD_ALGORITHM -- bool -- --config GENERIC_IOMAP -- bool -- default y -- --config GENERIC_FIND_NEXT_BIT -- bool -- default y -- --config GENERIC_HWEIGHT -- bool -+config FOX_VHDL -+ bool "Support for FOX-VHDL Board" -+ default n -+ -+config FOX_FPGA -+ bool "FPGA flash module" -+ depends on FOX_VHDL -+ help -+ Adds the module needed to flash the fpga from the FOX -+ -+config FOXBONE -+ bool "Basic FOXBONE support" -+ depends on FOX_VHDL -+ help -+ Include this to get basic FOXBONE support -+ -+config VT -+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED -+ select INPUT -+ default y if !VIOCONS -+ ---help--- -+ If you say Y here, you will get support for terminal devices with -+ display and keyboard devices. These are called "virtual" because you -+ can run several virtual terminals (also called virtual consoles) on -+ one physical terminal. This is rather useful, for example one -+ virtual terminal can collect system messages and warnings, another -+ one can be used for a text-mode user session, and a third could run -+ an X session, all in parallel. Switching between virtual terminals -+ is done with certain key combinations, usually Alt-<function key>. -+ -+ The setterm command ("man setterm") can be used to change the -+ properties (such as colors or beeping) of a virtual terminal. The -+ man page console_codes(4) ("man console_codes") contains the special -+ character sequences that can be used to change those properties -+ directly. The fonts used on virtual terminals can be changed with -+ the setfont ("man setfont") command and the key bindings are defined -+ with the loadkeys ("man loadkeys") command. -+ -+ You need at least one virtual terminal device in order to make use -+ of your keyboard and monitor. Therefore, only people configuring an -+ embedded system would want to say N here in order to save some -+ memory; the only way to log into such a system is then via a serial -+ or network connection. -+ -+ If unsure, say Y, or else you won't be able to do much with your new -+ shiny Linux system :-) -+ -+ -+menu "Framebuffer" -+depends on VT -+ -+config FB -+ bool "Support for frame buffer devices" -+ depends on VT -+ ---help--- -+ The frame buffer device provides an abstraction for the graphics -+ hardware. It represents the frame buffer of some video hardware and -+ allows application software to access the graphics hardware through -+ a well-defined interface, so the software doesn't need to know -+ anything about the low-level (hardware register) stuff. -+ -+ Frame buffer devices work identically across the different -+ architectures supported by Linux and make the implementation of -+ application programs easier and more portable; at this point, an X -+ server exists which uses the frame buffer device exclusively. -+ On several non-X86 architectures, the frame buffer device is the -+ only way to use the graphics hardware. -+ -+ The device is accessed through special device nodes, usually located -+ in the /dev directory, i.e. /dev/fb*. -+ -+ You need an utility program called fbset to make full use of frame -+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt> -+ and the Framebuffer-HOWTO at -+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more -+ information. -+ -+ Say Y here and to the driver for your graphics board below if you -+ are compiling a kernel for a non-x86 architecture. -+ -+ If you are compiling for the x86 architecture, you can say Y if you -+ want to play with it, but it is not essential. Please note that -+ running graphical applications that directly touch the hardware -+ (e.g. an accelerated X server) and that are not frame buffer -+ device-aware may cause unexpected results. If unsure, say N. -+ -+config FB_CFB_FILLRECT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_fillrect function for generic software rectangle -+ filling. This is used by drivers that don't provide their own -+ (accelerated) version. -+ -+config FB_CFB_COPYAREA -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_copyarea function for generic software area copying. -+ This is used by drivers that don't provide their own (accelerated) -+ version. -+ -+config FB_CFB_IMAGEBLIT -+ tristate -+ depends on FB -+ default n -+ ---help--- -+ Include the cfb_imageblit function for generic software image -+ blitting. This is used by drivers that don't provide their own -+ (accelerated) version. -+config DUMMY_CONSOLE -+ bool "Dummy Console" -+ depends on FB -+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y -+ default n -+ -+config FRAMEBUFFER_CONSOLE -+ bool "Framebuffer Console support" -+ depends on FB -+ select CRC32 -+ help -+ Low-level framebuffer-based console driver. -+config LOGO -+ bool "Bootup logo" -+ depends on FB || SGI_NEWPORT_CONSOLE -+ help -+ Enable and select frame buffer bootup logos. -+ -+config LOGO_LINUX_CLUT224 -+ bool "Standard 224-color Linux logo" -+ depends on LOGO - default y -- --config GENERIC_CALIBRATE_DELAY -- bool -- default y -- --config IRQ_PER_CPU -- bool -- default y -- --config CRIS -- bool -- default y -- --source "init/Kconfig" -- --menu "General setup" -- --source "fs/Kconfig.binfmt" -- --config GENERIC_HARDIRQS -- bool -- default y -- --config SMP -- bool "SMP" -- help -- SMP support. Always Say N. -- --config NR_CPUS -- int -- depends on SMP -- default 2 -- --config SCHED_MC -- bool "Multi-core scheduler support" -- depends on SMP -- default y -- help -- Multi-core scheduler support improves the CPU scheduler's decision -- making when dealing with multi-core CPU chips at a cost of slightly -- increased overhead in some places. If unsure say N here. -- --config ETRAX_CMDLINE -- string "Kernel command line" -- default "root=/dev/mtdblock3" -- help -- Pass additional commands to the kernel. -- --config ETRAX_WATCHDOG -- bool "Enable ETRAX watchdog" -- help -- Enable the built-in watchdog timer support on ETRAX based embedded -- network computers. -- --config ETRAX_WATCHDOG_NICE_DOGGY -- bool "Disable watchdog during Oops printouts" -- depends on ETRAX_WATCHDOG -- help -- By enabling this you make sure that the watchdog does not bite while -- printing oopses. Recommended for development systems but not for -- production releases. -- --config ETRAX_FAST_TIMER -- bool "Enable ETRAX fast timer API" -- help -- This options enables the API to a fast timer implementation using -- timer1 to get sub jiffie resolution timers (primarily one-shot -- timers). -- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. -- --config OOM_REBOOT -- bool "Enable reboot at out of memory" -- --source "kernel/Kconfig.preempt" --source "kernel/Kconfig.sched" -- --source mm/Kconfig -+config FONTS -+ bool "Select compiled-in fonts" -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ help -+ Say Y here if you would like to use fonts other than the default -+ your frame buffer console usually use. -+ -+ Note that the answer to this question won't directly affect the -+ kernel: saying N will just cause the configurator to skip all -+ the questions about foreign fonts. -+ -+ If unsure, say N (the default choices are safe). -+ -+config FONT_8x8 -+ bool "VGA 8x8 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the text console 80x50 (and higher) modes). -+ -+ Note that this is a poor quality font. The VGA 8x16 font is quite a -+ lot more readable. -+ -+ Given the resolution provided by the frame buffer device, answer N -+ here is safe. -+ -+config FONT_8x16 -+ bool "VGA 8x16 font" if FONTS -+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON -+ default y if !SPARC && !FONTS -+ help -+ This is the "high resolution" font for the VGA frame buffer (the one -+ provided by the VGA text console 80x25 mode. -+ -+ If unsure, say Y. -+ -+ -+config FOX_VHDL_FB -+ bool "FOX_VHDL Framebuffer" -+ depends on FOXBONE -+ depends on FB -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ select VT_CONSOLE -+ select DUMMY_CONSOLE -+ select FRAMEBUFFER_CONSOLE -+ select FONTS -+ select LOGO -+ select LOGO_LINUX_CLUT224 -+ -+config NANOXKBD -+ bool "nano-X keyboard support" -+ default n -+ depends on FOX_VHDL_FB -+ help -+ Enable the keyboard driver patches for nano-X -+ -+ -+ -+#if FOX_VHDL_FB -+ #source "drivers/video/console/Kconfig" -+#endif -+ -+#if FOX_VHDL_FB -+# source "drivers/video/logo/Kconfig" -+#endif - - endmenu - --menu "Hardware setup" -- --choice -- prompt "Processor type" -- default ETRAX100LX - --config ETRAX100LX -- bool "ETRAX-100LX-v1" -+config FOXBONE_IO -+ bool "FOXBONE I/O pins" -+ depends on FOXBONE - help -- Support version 1 of the ETRAX 100LX. -+ Include this to get access to the I/O pins of the foxbone - --config ETRAX100LX_V2 -- bool "ETRAX-100LX-v2" -+config FOXBONE_TIMEBASE -+ bool "FOXBONE Timebase" -+ depends on FOXBONE - help -- Support version 2 of the ETRAX 100LX. -+ Include this to get access to the timebase part of the fpga - --config SVINTO_SIM -- bool "ETRAX-100LX-for-xsim-simulator" -+config FOXBONE_MMC -+ bool "FOXBONE MMC/SD module" -+ depends on FOXBONE - help -- Support the xsim ETRAX Simulator. -+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board - --config ETRAXFS -- bool "ETRAX-FS-V32" -+config FOXBONE_PWM -+ bool "FOXBONE PWM module" -+ depends on FOXBONE - help -- Support CRIS V32. -+ Include this to enable PWM support into the kernel - --config ETRAXFS_SIM -- bool "ETRAX-FS-V32-Simulator" -+config FOXBONE_EVENT -+ bool "FOXBONE EVENT counter module" -+ depends on FOXBONE - help -- Support CRIS V32 VCS simualtor. -+ Include this to enable foxbone event counter support - --endchoice -- --config ETRAX_ARCH_V10 -- bool -- default y if ETRAX100LX || ETRAX100LX_V2 -- default n if !(ETRAX100LX || ETRAX100LX_V2) -- --config ETRAX_ARCH_V32 -- bool -- default y if ETRAXFS || ETRAXFS_SIM -- default n if !(ETRAXFS || ETRAXFS_SIM) -- --config ETRAX_DRAM_SIZE -- int "DRAM size (dec, in MB)" -- default "8" -+config FOXBONE_LOOPBACK -+ bool "FOXBONE Loopback module" -+ depends on FOXBONE - help -- Size of DRAM (decimal in MB) typically 2, 8 or 16. -+ Include this to be able to load the loopback module, that you can base your own driver on - --config ETRAX_FLASH_BUSWIDTH -- int "Buswidth of NOR flash in bytes" -- default "2" -+config FOXBONE_MULTIPLY -+ bool "FOXBONE Multiplier example" -+ depends on FOXBONE - help -- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. -+ Include this to use the 64 bit multiplier - --config ETRAX_NANDFLASH_BUSWIDTH -- int "Buswidth of NAND flash in bytes" -- default "1" -- help -- Width in bytes of the NAND flash (1 or 2). -+menu "FOXBONE interrupt handlers" -+config FOXBONE_SAMPLE_ISR -+ bool "FOXBONE example interrupt handlers" -+ depends on FOXBONE -+ -+config FOXBONE_INT14 -+ bool "Int 14 - bit 0 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR - --config ETRAX_FLASH1_SIZE -- int "FLASH1 size (dec, in MB. 0 = Unknown)" -- default "0" -+config FOXBONE_INT31 -+ bool "Int 31 - bit 1 of reg 0x13 set" -+ depends on FOXBONE_SAMPLE_ISR - --# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) --source arch/cris/arch/Kconfig -+endmenu - --endmenu -- --source "net/Kconfig" -- --# bring in ETRAX built-in drivers --menu "Drivers for built-in interfaces" --# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) --source arch/cris/arch/drivers/Kconfig - -+config ETRAX_CMDLINE -+ string "Kernel command line" -+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0" -+ help -+ use if no framebuffer is enabled console=ttyS0 -+ use if framebuffer is enabled console=tty0 -+ - endmenu -- --source "drivers/base/Kconfig" -- --# standard linux drivers --source "drivers/mtd/Kconfig" -- --source "drivers/parport/Kconfig" -- --source "drivers/pnp/Kconfig" -- --source "drivers/block/Kconfig" -- --source "drivers/md/Kconfig" -- --source "drivers/ide/Kconfig" -- --source "drivers/scsi/Kconfig" -- --source "drivers/ieee1394/Kconfig" -- --source "drivers/message/i2o/Kconfig" -- --source "drivers/net/Kconfig" -- --source "drivers/isdn/Kconfig" -- --source "drivers/telephony/Kconfig" -- --source "drivers/cdrom/Kconfig" -- --# --# input before char - char/joystick depends on it. As does USB. --# --source "drivers/input/Kconfig" -- --source "drivers/char/Kconfig" -- --#source drivers/misc/Config.in --source "drivers/media/Kconfig" -- --source "fs/Kconfig" -- --source "sound/Kconfig" -- --source "drivers/pcmcia/Kconfig" -- --source "drivers/pci/Kconfig" -- --source "drivers/usb/Kconfig" -- --source "arch/cris/Kconfig.debug" -- --source "security/Kconfig" -- --source "crypto/Kconfig" -- --source "lib/Kconfig" ---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/Kconfig 2007-06-17 02:52:11.000000000 +0200 -@@ -242,3 +242,6 @@ - source "crypto/Kconfig" - - source "lib/Kconfig" -+menu "Acmesystems" -+source "drivers/fox-vhdl/Kconfig" -+endmenu -79a80 -> obj-$(CONFIG_FOX_VHDL) += fox-vhdl/ -diff -urN linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h linux-2.6.19.2/include/linux/foxbone_syscalls.h ---- linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/include/linux/foxbone_syscalls.h 2007-06-17 03:31:39.000000000 +0200 -@@ -0,0 +1,18 @@ -+#ifndef __LINUX_SYSCALL_FOXBONE -+#define __LINUX_SYSCALL_FOXBONE -+#include <linux/autoconf.h> -+#include <linux/kernel.h> -+#include <linux/errno.h> -+#include <asm/unistd.h> -+ -+extern int errno; -+_syscall1(void, foxbonereset, unsigned short int, reg); -+_syscall1(unsigned short int, foxboneread, unsigned short int, reg); -+_syscall2(void, foxbonewrite, unsigned short int, reg, unsigned short int, value); -+_syscall3(void, foxbonebulkread, unsigned short int, reg, unsigned short int *, value, unsigned int, length); -+_syscall3(void, foxbonebulkwrite, unsigned short int, reg, unsigned short int *, value, unsigned int, length); -+_syscall2(void, foxboneintreg, unsigned long int, interrupt, unsigned char, state); -+_syscall1(unsigned int, foxboneintcheck, unsigned long int, interrupt); -+_syscall2(unsigned int, foxboneintwait, unsigned long int, interrupt, unsigned char, timeout); -+ -+#endif |