summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/adm5120/base-files/etc/preinit.arch16
-rw-r--r--target/linux/adm5120/base-files/lib/preinit/05_enable_leds_adm512012
-rw-r--r--target/linux/adm5120/base-files/lib/preinit/05_set_preinit_face_adm51209
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_enable_leds_ar71xx16
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx (renamed from target/linux/ar71xx/base-files/etc/preinit.arch)19
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx16
-rwxr-xr-xtarget/linux/atheros/base-files/etc/preinit.arch21
-rw-r--r--target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros32
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/preinit.arch71
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm-2.49
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm-2.438
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm-2.415
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm-2.46
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm-2.438
-rw-r--r--target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm-2.414
-rwxr-xr-xtarget/linux/gemini/base-files/etc/preinit.arch6
-rw-r--r--target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini13
-rwxr-xr-xtarget/linux/ifxmips/nfs/base-files/etc/preinit.arch5
-rw-r--r--target/linux/ifxmips/nfs/base-files/lib/preinit/01_init_nfs_ifxmips12
-rwxr-xr-xtarget/linux/ixp4xx/base-files/etc/preinit.arch15
-rw-r--r--target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx23
-rw-r--r--target/linux/pxcab/base-files/etc/preinit.arch2
-rw-r--r--target/linux/pxcab/base-files/lib/preinit/15_essential_fs_pxcab8
-rw-r--r--target/linux/pxcab/base-files/lib/preinit/45_failsafe_pxcab14
-rw-r--r--target/linux/rdc/base-files/etc/preinit.arch23
-rw-r--r--target/linux/rdc/base-files/lib/preinit/05_set_ether_mac_rdc32
-rw-r--r--target/linux/x86/base-files/etc/preinit.arch2
-rw-r--r--target/linux/x86/base-files/lib/preinit/15_essential_fs_x868
-rw-r--r--target/linux/x86/base-files/lib/preinit/45_failsafe_x8614
-rw-r--r--target/linux/x86/olpc/base-files/etc/preinit.arch2
-rw-r--r--target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x869
-rw-r--r--target/linux/x86/olpc/base-files/lib/preinit/45_failsafe_x8614
32 files changed, 353 insertions, 181 deletions
diff --git a/target/linux/adm5120/base-files/etc/preinit.arch b/target/linux/adm5120/base-files/etc/preinit.arch
deleted file mode 100755
index a4087db0e..000000000
--- a/target/linux/adm5120/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,16 +0,0 @@
-. /etc/functions.sh
-
-insmod input-core
-insmod input-polldev
-insmod gpio_buttons
-insmod button-hotplug
-
-ifname=eth0
-
-failsafe_ip
-
-netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-
-ifconfig "$ifname" 0.0.0.0 down
-
-sleep 2
diff --git a/target/linux/adm5120/base-files/lib/preinit/05_enable_leds_adm5120 b/target/linux/adm5120/base-files/lib/preinit/05_enable_leds_adm5120
new file mode 100644
index 000000000..01b2f7ea1
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/preinit/05_enable_leds_adm5120
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+enable_leds() {
+ insmod input-core
+ insmod input-polldev
+ insmod gpio_buttons
+ insmod button-hotplug
+}
+
+boot_hook_add preinit_main enable_leds
+
+
diff --git a/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_face_adm5120 b/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_face_adm5120
new file mode 100644
index 000000000..ac2a7cbb6
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_face_adm5120
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set_preinit_ifname() {
+ ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_ifname
+
+
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_enable_leds_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_enable_leds_ar71xx
new file mode 100644
index 000000000..0b130fbf2
--- /dev/null
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_enable_leds_ar71xx
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+. /lib/ar71xx.sh
+
+
+preinit_enable_leds() {
+ insmod input-core
+ insmod input-polldev
+ insmod gpio_buttons
+ insmod button-hotplug
+}
+
+boot_hook_add preinit_main preinit_enable_leds
+
diff --git a/target/linux/ar71xx/base-files/etc/preinit.arch b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index f770ca371..f8bb7b76c 100644
--- a/target/linux/ar71xx/base-files/etc/preinit.arch
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -20,13 +20,6 @@ fetch_mac_from_mtd() {
[ ! -z $mac ] && ifconfig eth1 hw ether $mac 2>/dev/null
}
-preinit_load_modules() {
- insmod input-core
- insmod input-polldev
- insmod gpio_buttons
- insmod button-hotplug
-}
-
preinit_set_mac_address() {
case $(ar71xx_board_name) in
tew-632brp)
@@ -42,15 +35,5 @@ preinit_set_mac_address() {
esac
}
-preinit_set_mac_address
-preinit_load_modules
-
-ifname=eth0
-
-failsafe_ip
-
-netmsg 192.168.1.255 "Press any button now, to enter Failsafe!"
-
-ifconfig "$ifname" 0.0.0.0 down
+boot_hook_add preinit_main preinit_set_mac_address
-sleep 2
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
new file mode 100644
index 000000000..8611dce81
--- /dev/null
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+. /lib/ar71xx.sh
+
+set_preinit_iface() {
+ ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_iface
+
+
+
diff --git a/target/linux/atheros/base-files/etc/preinit.arch b/target/linux/atheros/base-files/etc/preinit.arch
deleted file mode 100755
index bdfe67ba5..000000000
--- a/target/linux/atheros/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,21 +0,0 @@
-# reset button only supported on ar5315+ at the moment
-grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
- if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
- -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
- vconfig set_name_type DEV_PLUS_VID_NO_PAD
- ifconfig eth0 up
- vconfig add eth0 1
- ifname=eth0.1
- else
- ifname=eth0
- fi
- failsafe_ip
- netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
- sleep 2
- if [ -z "$FAILSAFE" -a \
- \( -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
- -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" \) ]; then
- vconfig rem eth0.1
- ifconfig eth0 down
- fi
-}
diff --git a/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros
new file mode 100644
index 000000000..c15b4de1e
--- /dev/null
+++ b/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+# reset button only supported on ar5315+ at the moment
+preinit_ip() {
+ if [ -z "$pi_ifname" ]; then
+ grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
+ if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+ vconfig set_name_type DEV_PLUS_VID_NO_PAD
+ ifconfig eth0 up
+ vconfig add eth0 1
+ ifname=eth0.1
+ else
+ ifname=eth0
+ fi
+ pi_ifname=$ifname
+ }
+ [ -n "$pi_ifname" ] && grep "$pi_ifname" /proc/net/dev >/dev/null && {
+ ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+ }
+}
+
+
+# reset button only supported on ar5315+ at the moment
+
+preinit_ip_deconfig() {
+ if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+ vconfig rem eth0.1 2>/dev/null
+ ifconfig $pi_ifname down
+ fi
+}
diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch
deleted file mode 100755
index e62360e44..000000000
--- a/target/linux/brcm-2.4/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,71 +0,0 @@
-. /etc/functions.sh
-
-failsafe() {
- lock /tmp/.failsafe
- failsafe_ip
-
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-
- set_state failsafe
- [ -x "/usr/sbin/nvram" ] && {
- [ "$(nvram get boot_wait)" != "on" ] && {
- nvram set boot_wait=on
- nvram commit
- }
- }
-
- netmsg 192.168.1.255 "Entering Failsafe!"
- telnetd -l /bin/login.sh <> /dev/null 2>&1
-
- ash --login
-}
-
-mount none /proc -t proc
-
-insmod diag
-set_state preinit
-echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-
-ifname=eth0
-
-# hardware specific overrides
-case "$(cat /proc/diag/model)" in
- "Linksys WAP54G V1") ifname=eth1;;
- "ASUS WL-HDD") ifname=eth1;;
- "ASUS WL-300g") ifname=eth1;;
- "ASUS (unknown, BCM4702)") ifname=eth1;;
- "Sitecom WL-105b") ifname=eth1;;
-esac
-
-check_module () {
- module="$1"; shift; params="$*"
-
- insmod "$module" "$params"
- sleep 1
- grep "^$module" /proc/modules
- return $?
-}
-
-check_module tg3
-failsafe_ip
-
-insmod switch-core
-check_module switch-robo || check_module switch-adm || {
- check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
-} || rmmod switch-core
-
-[ -d /proc/switch/eth0 ] && {
- echo 1 > /proc/switch/eth0/reset
-
- # this would be easier if we blasted the message across all ports
- # but we don't want packets leaking across interfaces
- for port in $(seq 0 4); do {
- echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
- netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
- }; done
-} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-
-ifconfig $ifname 0.0.0.0 down
-
-sleep 2
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm-2.4
new file mode 100644
index 000000000..b0f4a4efa
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm-2.4
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+init_hotplug_failsafe() {
+ echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
+}
+
+boot_hook_add preinit_main init_hotplug_failsafe
+
+
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm-2.4
new file mode 100644
index 000000000..81cf1f138
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm-2.4
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+set_preinit_iface() {
+ ifname=eth0
+
+ insmod diag
+
+ # hardware specific overrides
+ case "$(cat /proc/diag/model)" in
+ "Linksys WAP54G V1") ifname=eth1;;
+ "ASUS WL-HDD") ifname=eth1;;
+ "ASUS WL-300g") ifname=eth1;;
+ "ASUS (unknown, BCM4702)") ifname=eth1;;
+ "Sitecom WL-105b") ifname=eth1;;
+ esac
+}
+
+check_module () {
+ module="$1"; shift; params="$*"
+
+ insmod "$module" "$params"
+ sleep 1
+ grep "^$module" /proc/modules
+ return $?
+}
+
+init_iface() {
+ check_module tg3
+ insmod switch-core
+ check_module switch-robo || check_module switch-adm || {
+ check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
+ } || rmmod switch-core
+}
+
+boot_hook_add preinit_main init_iface
+boot_hook_add preinit_main set_preinit_iface
+
+
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm-2.4
new file mode 100644
index 000000000..28e62e5b5
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm-2.4
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+failsafe_ip() {
+ [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
+ ifconfig eth0 0.0.0.0 down
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ }
+
+ [ -n "$pi_ifname" ] && grep "$pi_ifname" /proc/net/dev >/dev/null && {
+ ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+ }
+}
+
+boot_hook_add failsafe failsafe_ip
+
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm-2.4
new file mode 100644
index 000000000..fd5add16a
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm-2.4
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+do_mount_procfs() {
+ mount none /proc -t proc
+}
+
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm-2.4
new file mode 100644
index 000000000..5e8dc9f11
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm-2.4
@@ -0,0 +1,38 @@
+. /etc/functions.sh
+
+port_net_echo() {
+ [ -n "$pi_ifname" ] && grep "$pi_ifname" /proc/net/dev >/dev/null ] {
+ if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true"] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
+ netmsg $pi_broadcast "$1"
+ }
+ }
+}
+
+preinit_ip_deconfig() {
+ if [ -z "$pi_ifname" ]; then
+ ifconfig $ifname 0.0.0.0 down
+ else
+ grep "$pi_ifname" /proc/net/dev >/dev/null && {
+ ifconfig $pi_ifname 0.0.0.0 down
+ }
+ fi
+}
+
+preinit_net_echo() {
+ preinit_ip
+
+ [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
+ echo 1 > /proc/switch/eth0/reset
+
+ # this would be easier if we blasted the message across all ports
+ # but we don't want packets leaking across interfaces
+ for port in $(seq 0 4); do {
+ echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ port_net_echo $1
+ }; done
+ } || port_net_echo $1
+
+ preinit_ip_deconfig
+}
+
+
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm-2.4 b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm-2.4
new file mode 100644
index 000000000..da721b848
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm-2.4
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+. /etc/functions.sh
+
+set_boot_wait() {
+ [ -x "/usr/sbin/nvram" ] && {
+ [ "$(nvram get boot_wait)" != "on" ] && {
+ nvram set boot_wait=on
+ nvram commit
+ }
+ }
+}
+
+boot_hook_add failsafe set_boot_wait
diff --git a/target/linux/gemini/base-files/etc/preinit.arch b/target/linux/gemini/base-files/etc/preinit.arch
deleted file mode 100755
index ecdb41039..000000000
--- a/target/linux/gemini/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_PARTITION="$(grep "VCTL" /proc/mtd | cut -d: -f1)"
-MAC1="$(strings /dev/$CONFIG_PARTITION |grep MAC|cut -d: -f2|cut -c3-14|sed -e 's,\(..\),:\1,g' -e 's,^:,,')"
-MAC2="$(strings /dev/$CONFIG_PARTITION |grep MAC|cut -d: -f8|cut -c3-14|sed -e 's,\(..\),:\1,g' -e 's,^:,,')"
-
-ifconfig eth0 hw ether $MAC1 2>/dev/null
-ifconfig eth1 hw ether $MAC2 2>/dev/null
diff --git a/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini b/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini
new file mode 100644
index 000000000..499608120
--- /dev/null
+++ b/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set_ether_mac() {
+ CONFIG_PARTITION="$(grep "VCTL" /proc/mtd | cut -d: -f1)"
+ MAC1="$(strings /dev/$CONFIG_PARTITION |grep MAC|cut -d: -f2|cut -c3-14|sed -e 's,\(..\),:\1,g' -e 's,^:,,')"
+ MAC2="$(strings /dev/$CONFIG_PARTITION |grep MAC|cut -d: -f8|cut -c3-14|sed -e 's,\(..\),:\1,g' -e 's,^:,,')"
+
+ ifconfig eth0 hw ether $MAC1 2>/dev/null
+ ifconfig eth1 hw ether $MAC2 2>/dev/null
+}
+
+boot_hook_add preinit_main set_ether_mac
+
diff --git a/target/linux/ifxmips/nfs/base-files/etc/preinit.arch b/target/linux/ifxmips/nfs/base-files/etc/preinit.arch
deleted file mode 100755
index 7ee8e3e34..000000000
--- a/target/linux/ifxmips/nfs/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,5 +0,0 @@
-
-grep "/dev/root" /proc/mounts |grep -q nfs && {
- echo "- init nfs -"
- exec /sbin/init
-}
diff --git a/target/linux/ifxmips/nfs/base-files/lib/preinit/01_init_nfs_ifxmips b/target/linux/ifxmips/nfs/base-files/lib/preinit/01_init_nfs_ifxmips
new file mode 100644
index 000000000..e2cf52dc4
--- /dev/null
+++ b/target/linux/ifxmips/nfs/base-files/lib/preinit/01_init_nfs_ifxmips
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+
+init_nfs() {
+ grep "/dev/root" /proc/mounts |grep -q nfs && {
+ echo "- init nfs -"
+ exec /sbin/init
+ }
+}
+
+boot_hook_add preinit_main init_nfs
+
diff --git a/target/linux/ixp4xx/base-files/etc/preinit.arch b/target/linux/ixp4xx/base-files/etc/preinit.arch
deleted file mode 100755
index f52133d84..000000000
--- a/target/linux/ixp4xx/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,15 +0,0 @@
-RB_CONFIG="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
-
-for npe in eth0 eth1 eth2
-do
- if [ "$(ifconfig $npe 2>/dev/null | grep -c 00:00:00:00:00:00)" == "1" ]; then
- ifconfig $npe hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n npe_"$npe"_esa)
- fi
-done
-
-# Some developers should be shot on sight at Zcom/Netgear
-# -- Fixup for the WG302v1, need someone with a WAG302v1 to fix that, too
-
-if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" == "1" ]; then
- ifconfig eth0 hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n zcom_npe_esa)
-fi
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
new file mode 100644
index 000000000..e19e0ec25
--- /dev/null
+++ b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+set_ether_mac() {
+
+ RB_CONFIG="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
+
+ for npe in eth0 eth1 eth2
+ do
+ if [ "$(ifconfig $npe 2>/dev/null | grep -c 00:00:00:00:00:00)" == "1" ]; then
+ ifconfig $npe hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n npe_"$npe"_esa)
+ fi
+ done
+
+ # Some developers should be shot on sight at Zcom/Netgear
+ # -- Fixup for the WG302v1, need someone with a WAG302v1 to fix that, too
+
+ if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" == "1" ]; then
+ ifconfig eth0 hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n zcom_npe_esa)
+ fi
+}
+
+boot_hook_add preinit_main set_ether_mac
+
diff --git a/target/linux/pxcab/base-files/etc/preinit.arch b/target/linux/pxcab/base-files/etc/preinit.arch
deleted file mode 100644
index 00db8b4ac..000000000
--- a/target/linux/pxcab/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,2 +0,0 @@
-mount -t proc none /proc
-grep 'failsafe=' /proc/cmdline > /dev/null && export FAILSAFE=true
diff --git a/target/linux/pxcab/base-files/lib/preinit/15_essential_fs_pxcab b/target/linux/pxcab/base-files/lib/preinit/15_essential_fs_pxcab
new file mode 100644
index 000000000..2c607e260
--- /dev/null
+++ b/target/linux/pxcab/base-files/lib/preinit/15_essential_fs_pxcab
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+#!/bin/sh
+
+do_mount_procfs() {
+ mount -t proc none /proc
+}
+
diff --git a/target/linux/pxcab/base-files/lib/preinit/45_failsafe_pxcab b/target/linux/pxcab/base-files/lib/preinit/45_failsafe_pxcab
new file mode 100644
index 000000000..6e5636a8c
--- /dev/null
+++ b/target/linux/pxcab/base-files/lib/preinit/45_failsafe_pxcab
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+failsafe_wait() {
+ FAILSAFE=
+ grep 'failsafe=' /proc/cmdline > /dev/null && FAILSAFE=true && export FAILSAFE
+ if [ "$FAILSAFE" != "true" ]; then
+ preinit_net_echo "Please press button now to enter failsafe"
+ echo -n "Press CTRL-C or "
+ fs_wait_for_key f 'to enter failsafe mode' $fs_failsafe_wait_timeout && FAILSAFE=true && export FAILSAFE
+ fi
+}
+
diff --git a/target/linux/rdc/base-files/etc/preinit.arch b/target/linux/rdc/base-files/etc/preinit.arch
deleted file mode 100644
index fd456f8b2..000000000
--- a/target/linux/rdc/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,23 +0,0 @@
-# Copyright (C) 2009 OpenWrt.org
-
-. /etc/functions.sh
-
-insmod r6040
-
-kernel=$(grep magic /proc/mtd | awk -F: '{print $1}')
-[ -n $kernel ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null)
-[ "$hdr" = "CSYS" ] && config=$(find_mtd_part config)
-if [ -n "$config" ]; then
- mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-)
- [ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0
- mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-)
- [ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac1
-fi
-if [ -n $mac0 ]; then
- logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0"
- ifconfig eth0 hw ether $mac0
-fi
-if [ -n $mac1 ]; then
- logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1"
- ifconfig eth1 hw ether $mac1
-fi
diff --git a/target/linux/rdc/base-files/lib/preinit/05_set_ether_mac_rdc b/target/linux/rdc/base-files/lib/preinit/05_set_ether_mac_rdc
new file mode 100644
index 000000000..43823c48e
--- /dev/null
+++ b/target/linux/rdc/base-files/lib/preinit/05_set_ether_mac_rdc
@@ -0,0 +1,32 @@
+#!/bin/sh
+# Copyright (C) 2009 OpenWrt.org
+
+. /etc/boot.sh
+
+r6040_module() {
+ insmod r6040
+}
+
+set_ether_mac() {
+ kernel=$(grep magic /proc/mtd | awk -F: '{print $1}')
+ [ -n $kernel ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null)
+ [ "$hdr" = "CSYS" ] && config=$(find_mtd_part config)
+ if [ -n "$config" ]; then
+ mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-)
+ [ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0
+ mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-)
+ [ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac1
+ fi
+ if [ -n $mac0 ]; then
+ logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0"
+ ifconfig eth0 hw ether $mac0
+ fi
+ if [ -n $mac1 ]; then
+ logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1"
+ ifconfig eth1 hw ether $mac1
+ fi
+}
+
+boot_hook_add preinit_main r6040_module
+boot_hook_add preinit_main set_ether_mac
+
diff --git a/target/linux/x86/base-files/etc/preinit.arch b/target/linux/x86/base-files/etc/preinit.arch
deleted file mode 100644
index 00db8b4ac..000000000
--- a/target/linux/x86/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,2 +0,0 @@
-mount -t proc none /proc
-grep 'failsafe=' /proc/cmdline > /dev/null && export FAILSAFE=true
diff --git a/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86 b/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86
new file mode 100644
index 000000000..ba22849d1
--- /dev/null
+++ b/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86
@@ -0,0 +1,8 @@
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+do_mount_procfs() {
+ mount -t proc none /proc
+}
+
diff --git a/target/linux/x86/base-files/lib/preinit/45_failsafe_x86 b/target/linux/x86/base-files/lib/preinit/45_failsafe_x86
new file mode 100644
index 000000000..6e5636a8c
--- /dev/null
+++ b/target/linux/x86/base-files/lib/preinit/45_failsafe_x86
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+failsafe_wait() {
+ FAILSAFE=
+ grep 'failsafe=' /proc/cmdline > /dev/null && FAILSAFE=true && export FAILSAFE
+ if [ "$FAILSAFE" != "true" ]; then
+ preinit_net_echo "Please press button now to enter failsafe"
+ echo -n "Press CTRL-C or "
+ fs_wait_for_key f 'to enter failsafe mode' $fs_failsafe_wait_timeout && FAILSAFE=true && export FAILSAFE
+ fi
+}
+
diff --git a/target/linux/x86/olpc/base-files/etc/preinit.arch b/target/linux/x86/olpc/base-files/etc/preinit.arch
deleted file mode 100644
index f29f0d448..000000000
--- a/target/linux/x86/olpc/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,2 +0,0 @@
-mount -t proc none /proc
-grep 'failsafe=' /proc/cmdline && export FAILSAFE=true
diff --git a/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86 b/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86
new file mode 100644
index 000000000..be342433d
--- /dev/null
+++ b/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86
@@ -0,0 +1,9 @@
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+do_mount_procfs() {
+ mount -t proc none /proc
+}
+
+
diff --git a/target/linux/x86/olpc/base-files/lib/preinit/45_failsafe_x86 b/target/linux/x86/olpc/base-files/lib/preinit/45_failsafe_x86
new file mode 100644
index 000000000..6e5636a8c
--- /dev/null
+++ b/target/linux/x86/olpc/base-files/lib/preinit/45_failsafe_x86
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+failsafe_wait() {
+ FAILSAFE=
+ grep 'failsafe=' /proc/cmdline > /dev/null && FAILSAFE=true && export FAILSAFE
+ if [ "$FAILSAFE" != "true" ]; then
+ preinit_net_echo "Please press button now to enter failsafe"
+ echo -n "Press CTRL-C or "
+ fs_wait_for_key f 'to enter failsafe mode' $fs_failsafe_wait_timeout && FAILSAFE=true && export FAILSAFE
+ fi
+}
+