diff options
Diffstat (limited to 'target/linux')
61 files changed, 697 insertions, 855 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.28/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.28/100-board_support.patch index c6428ac02..ac5d9124e 100644 --- a/target/linux/brcm47xx/patches-2.6.28/100-board_support.patch +++ b/target/linux/brcm47xx/patches-2.6.28/100-board_support.patch @@ -15,7 +15,7 @@ extern char *system_type; --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -2068,6 +2068,7 @@ +@@ -2069,6 +2069,7 @@ #define PCI_DEVICE_ID_TIGON3_5906M 0x1713 #define PCI_DEVICE_ID_BCM4401 0x4401 #define PCI_DEVICE_ID_BCM4401B0 0x4402 diff --git a/target/linux/brcm47xx/patches-2.6.28/270-ehci-ssb.patch b/target/linux/brcm47xx/patches-2.6.28/270-ehci-ssb.patch index 32eb0bdd7..68f7322ca 100644 --- a/target/linux/brcm47xx/patches-2.6.28/270-ehci-ssb.patch +++ b/target/linux/brcm47xx/patches-2.6.28/270-ehci-ssb.patch @@ -22,7 +22,7 @@ depends on USB --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c -@@ -1034,8 +1034,16 @@ MODULE_LICENSE ("GPL"); +@@ -1036,8 +1036,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ixp4xx_ehci_driver #endif diff --git a/target/linux/brcm47xx/patches-2.6.28/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.28/400-arch-bcm47xx.patch index ad7e66702..ef6b71267 100644 --- a/target/linux/brcm47xx/patches-2.6.28/400-arch-bcm47xx.patch +++ b/target/linux/brcm47xx/patches-2.6.28/400-arch-bcm47xx.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.28.7/arch/mips/Kconfig -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/Kconfig 2009-03-17 17:26:23.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/Kconfig 2009-03-17 17:27:33.000000000 +0100 +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig @@ -53,6 +53,7 @@ config BCM47XX select SSB_DRIVER_MIPS select SSB_DRIVER_EXTIF @@ -10,20 +8,16 @@ Index: linux-2.6.28.7/arch/mips/Kconfig select SSB_PCICORE_HOSTMODE if PCI select GENERIC_GPIO select SYS_HAS_EARLY_PRINTK -Index: linux-2.6.28.7/arch/mips/bcm47xx/Makefile -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/bcm47xx/Makefile 2009-03-17 17:26:19.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/bcm47xx/Makefile 2009-03-17 17:26:56.000000000 +0100 +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile @@ -3,4 +3,4 @@ # under Linux. # -obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o +obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o -Index: linux-2.6.28.7/arch/mips/bcm47xx/irq.c -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/bcm47xx/irq.c 2009-03-17 17:26:19.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/bcm47xx/irq.c 2009-03-17 17:26:23.000000000 +0100 +--- a/arch/mips/bcm47xx/irq.c ++++ b/arch/mips/bcm47xx/irq.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> @@ -51,10 +45,8 @@ Index: linux-2.6.28.7/arch/mips/bcm47xx/irq.c void plat_irq_dispatch(void) { u32 cause; -Index: linux-2.6.28.7/arch/mips/bcm47xx/nvram.c -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/bcm47xx/nvram.c 2009-03-17 17:26:19.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/bcm47xx/nvram.c 2009-03-17 17:26:23.000000000 +0100 +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c @@ -24,10 +24,10 @@ #include <asm/io.h> #include <asm/uaccess.h> @@ -77,10 +69,8 @@ Index: linux-2.6.28.7/arch/mips/bcm47xx/nvram.c struct nvram_header *header; int i; u32 base, lim, off; -Index: linux-2.6.28.7/arch/mips/bcm47xx/setup.c -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/bcm47xx/setup.c 2009-03-17 17:26:19.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/bcm47xx/setup.c 2009-03-17 17:26:23.000000000 +0100 +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c @@ -2,7 +2,7 @@ * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org> @@ -305,10 +295,8 @@ Index: linux-2.6.28.7/arch/mips/bcm47xx/setup.c + return 0; +} +device_initcall(bcm47xx_register_gpiodev); -Index: linux-2.6.28.7/arch/mips/bcm47xx/time.c -=================================================================== ---- linux-2.6.28.7.orig/arch/mips/bcm47xx/time.c 2009-03-17 17:26:19.000000000 +0100 -+++ linux-2.6.28.7/arch/mips/bcm47xx/time.c 2009-03-17 17:26:23.000000000 +0100 +--- a/arch/mips/bcm47xx/time.c ++++ b/arch/mips/bcm47xx/time.c @@ -22,11 +22,17 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ diff --git a/target/linux/brcm47xx/patches-2.6.28/500-lzma_initramfs.patch b/target/linux/brcm47xx/patches-2.6.28/500-lzma_initramfs.patch index c2acdeeca..6a4a666c3 100644 --- a/target/linux/brcm47xx/patches-2.6.28/500-lzma_initramfs.patch +++ b/target/linux/brcm47xx/patches-2.6.28/500-lzma_initramfs.patch @@ -1,5 +1,5 @@ ---- a/init/initramfs.c 2009-03-23 22:55:52.000000000 +0100 -+++ b/init/initramfs.c 2009-05-01 11:15:46.000000000 +0200 +--- a/init/initramfs.c ++++ b/init/initramfs.c @@ -7,6 +7,7 @@ #include <linux/string.h> #include <linux/syscalls.h> @@ -8,7 +8,7 @@ static __initdata char *message; static void __init error(char *x) -@@ -475,6 +476,69 @@ +@@ -475,6 +476,69 @@ static void __init flush_window(void) outcnt = 0; } @@ -78,7 +78,7 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) { int written; -@@ -509,12 +573,28 @@ +@@ -509,12 +573,28 @@ static char * __init unpack_to_rootfs(ch inptr = 0; outcnt = 0; /* bytes in output buffer */ bytes_out = 0; @@ -112,9 +112,9 @@ buf += inptr; len -= inptr; } ---- a/scripts/gen_initramfs_list.sh 2009-03-23 22:55:52.000000000 +0100 -+++ b/scripts/gen_initramfs_list.sh 2009-05-01 11:12:45.000000000 +0200 -@@ -287,7 +287,7 @@ +--- a/scripts/gen_initramfs_list.sh ++++ b/scripts/gen_initramfs_list.sh +@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then if [ "${is_cpio_compressed}" = "compressed" ]; then cat ${cpio_tfile} > ${output_file} else diff --git a/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch b/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch index 32b57764b..3f1aeef8d 100644 --- a/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch +++ b/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch @@ -1,6 +1,6 @@ ---- linux-2.6.28.9/arch/mips/Kconfig 2009-04-17 10:43:28.000000000 +0200 -+++ linux-2.6.28.9.new/arch/mips/Kconfig 2009-04-17 10:43:51.000000000 +0200 -@@ -56,7 +56,6 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -56,7 +56,6 @@ config BCM47XX select SSB_B43_PCI_BRIDGE if PCI select SSB_PCICORE_HOSTMODE if PCI select GENERIC_GPIO diff --git a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch b/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch index e5cfdb82a..630078b2f 100644 --- a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch +++ b/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch @@ -33,7 +33,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> #error "missing bus glue for ehci-hcd" --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h -@@ -761,6 +761,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u +@@ -764,6 +764,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) #endif diff --git a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch index 6495c4957..bf43914f7 100644 --- a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch +++ b/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch @@ -1,7 +1,6 @@ -diff -urN linux-2.6.28.clean/arch/cris/Makefile linux-2.6.28.mod/arch/cris/Makefile ---- linux-2.6.28.clean/arch/cris/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28.mod/arch/cris/Makefile 2009-04-07 11:52:30.000000000 +0200 -@@ -40,7 +40,7 @@ +--- a/arch/cris/Makefile ++++ b/arch/cris/Makefile +@@ -40,7 +40,7 @@ endif LD = $(CROSS_COMPILE)ld -mcrislinux @@ -10,9 +9,8 @@ diff -urN linux-2.6.28.clean/arch/cris/Makefile linux-2.6.28.mod/arch/cris/Makef CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) -diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/Makefile linux-2.6.28.mod/arch/cris/arch-v10/boot/Makefile ---- linux-2.6.28.clean/arch/cris/arch-v10/boot/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28.mod/arch/cris/arch-v10/boot/Makefile 2009-04-07 11:55:01.000000000 +0200 +--- a/arch/cris/arch-v10/boot/Makefile ++++ b/arch/cris/arch-v10/boot/Makefile @@ -2,8 +2,6 @@ # arch/cris/arch-v10/boot/Makefile # @@ -22,7 +20,7 @@ diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/Makefile linux-2.6.28.mod/a subdir- := compressed rescue targets := Image -@@ -13,7 +11,7 @@ +@@ -13,7 +11,7 @@ $(obj)/Image: vmlinux FORCE $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ @@ -31,10 +29,9 @@ diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/Makefile linux-2.6.28.mod/a $(obj)/zImage: $(obj)/compressed/vmlinux @cp $< $@ -diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.28.mod/arch/cris/arch-v10/boot/compressed/Makefile ---- linux-2.6.28.clean/arch/cris/arch-v10/boot/compressed/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28.mod/arch/cris/arch-v10/boot/compressed/Makefile 2009-04-07 11:53:02.000000000 +0200 -@@ -6,7 +6,6 @@ +--- a/arch/cris/arch-v10/boot/compressed/Makefile ++++ b/arch/cris/arch-v10/boot/compressed/Makefile +@@ -6,7 +6,6 @@ asflags-y += $(LINUXINCLUDE) ccflags-y += -O2 $(LINUXINCLUDE) ldflags-y += -T $(srctree)/$(src)/decompress.lds OBJECTS = $(obj)/head.o $(obj)/misc.o @@ -42,9 +39,8 @@ diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/compressed/Makefile linux-2 quiet_cmd_image = BUILD $@ cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ -diff -urN linux-2.6.28.clean/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.28.mod/arch/cris/arch-v10/boot/rescue/Makefile ---- linux-2.6.28.clean/arch/cris/arch-v10/boot/rescue/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28.mod/arch/cris/arch-v10/boot/rescue/Makefile 2009-04-07 11:53:09.000000000 +0200 +--- a/arch/cris/arch-v10/boot/rescue/Makefile ++++ b/arch/cris/arch-v10/boot/rescue/Makefile @@ -5,7 +5,6 @@ ccflags-y += -O2 $(LINUXINCLUDE) asflags-y += $(LINUXINCLUDE) diff --git a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch b/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch index 5df6590fa..d04c2794d 100644 --- a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch +++ b/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch @@ -1,10 +1,8 @@ -Index: linux-2.6.28.2/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.28.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2009-02-04 13:42:19.000000000 +0100 -+++ linux-2.6.28.2/drivers/mtd/chips/cfi_cmdset_0002.c 2009-02-04 13:44:11.000000000 +0100 -@@ -364,7 +364,7 @@ - return NULL; - } +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -374,7 +374,7 @@ struct mtd_info *cfi_cmdset_0002(struct + + cfi_fixup_major_minor(cfi, extp); - if (extp->MajorVersion != '1' || + if (extp->MajorVersion < '1' || extp->MajorVersion > '3' || diff --git a/target/linux/etrax/patches-2.6.29/201-flashsize.patch b/target/linux/etrax/patches-2.6.29/201-flashsize.patch index e825acf1f..42a467f74 100644 --- a/target/linux/etrax/patches-2.6.29/201-flashsize.patch +++ b/target/linux/etrax/patches-2.6.29/201-flashsize.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c -=================================================================== ---- linux-2.6.28.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2009-02-04 13:49:34.000000000 +0100 -+++ linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c 2009-02-04 13:55:30.000000000 +0100 -@@ -113,7 +113,7 @@ +--- a/arch/cris/arch-v10/drivers/axisflashmap.c ++++ b/arch/cris/arch-v10/drivers/axisflashmap.c +@@ -113,7 +113,7 @@ static struct map_info map_cse1 = { /* If no partition-table was found, we use this default-set. */ #define MAX_PARTITIONS 7 @@ -11,7 +9,7 @@ Index: linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c /* * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the -@@ -122,19 +122,14 @@ +@@ -122,19 +122,14 @@ static struct map_info map_cse1 = { */ static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { { @@ -36,7 +34,7 @@ Index: linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c } }; -@@ -281,6 +276,11 @@ +@@ -281,6 +276,11 @@ static int __init init_axis_flash(void) struct partitiontable_entry *ptable; int use_default_ptable = 1; /* Until proven otherwise. */ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; @@ -48,7 +46,7 @@ Index: linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c if (!(mymtd = flash_probe())) { /* There's no reason to use this module if no flash chip can -@@ -293,6 +293,31 @@ +@@ -293,6 +293,31 @@ static int __init init_axis_flash(void) axisflash_mtd = mymtd; } @@ -80,10 +78,8 @@ Index: linux-2.6.28.2/arch/cris/arch-v10/drivers/axisflashmap.c if (mymtd) { mymtd->owner = THIS_MODULE; ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR + -Index: linux-2.6.28.2/arch/cris/arch-v10/lib/hw_settings.S -=================================================================== ---- linux-2.6.28.2.orig/arch/cris/arch-v10/lib/hw_settings.S 2009-02-04 13:48:25.000000000 +0100 -+++ linux-2.6.28.2/arch/cris/arch-v10/lib/hw_settings.S 2009-02-04 13:49:04.000000000 +0100 +--- a/arch/cris/arch-v10/lib/hw_settings.S ++++ b/arch/cris/arch-v10/lib/hw_settings.S @@ -60,3 +60,5 @@ .dword R_PORT_PB_SET .dword PB_SET_VALUE diff --git a/target/linux/etrax/patches-2.6.29/300-sysfs.patch b/target/linux/etrax/patches-2.6.29/300-sysfs.patch index 9f415b4a8..ffaec3675 100644 --- a/target/linux/etrax/patches-2.6.29/300-sysfs.patch +++ b/target/linux/etrax/patches-2.6.29/300-sysfs.patch @@ -8,7 +8,7 @@ #include <asm/io.h> #include <asm/irq.h> -@@ -4384,6 +4385,7 @@ static const struct tty_operations rs_op +@@ -4393,6 +4394,7 @@ static const struct tty_operations rs_op .tiocmset = rs_tiocmset }; @@ -16,7 +16,7 @@ static int __init rs_init(void) { -@@ -4518,6 +4520,24 @@ rs_init(void) +@@ -4527,6 +4529,24 @@ rs_init(void) #endif #endif /* CONFIG_SVINTO_SIM */ diff --git a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch index d0fdbf589..ed2bfe459 100644 --- a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch +++ b/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.28.9/arch/cris/Kconfig -=================================================================== ---- linux-2.6.28.9.orig/arch/cris/Kconfig 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9/arch/cris/Kconfig 2009-04-08 16:53:30.000000000 +0200 -@@ -662,6 +662,12 @@ +--- a/arch/cris/Kconfig ++++ b/arch/cris/Kconfig +@@ -662,6 +662,12 @@ source "drivers/block/Kconfig" source "drivers/ide/Kconfig" diff --git a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch index 7eed8b2a7..dc63165c5 100644 --- a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch +++ b/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.20/arch/cris/arch-v10/drivers/Kconfig -=================================================================== ---- linux-2.6.25.20.orig/arch/cris/arch-v10/drivers/Kconfig 2009-02-09 09:30:40.000000000 +0100 -+++ linux-2.6.25.20/arch/cris/arch-v10/drivers/Kconfig 2009-02-09 21:23:12.000000000 +0100 -@@ -450,11 +450,18 @@ +--- a/arch/cris/arch-v10/drivers/Kconfig ++++ b/arch/cris/arch-v10/drivers/Kconfig +@@ -450,11 +450,18 @@ config ETRAX_I2C i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); @@ -22,7 +20,7 @@ Index: linux-2.6.25.20/arch/cris/arch-v10/drivers/Kconfig help Select whether to use the special I2C mode in the PB I/O register or not. This option needs to be selected in order to use some drivers -@@ -478,7 +485,7 @@ +@@ -478,7 +485,7 @@ config ETRAX_I2C_CLK_PORT config ETRAX_I2C_EEPROM bool "I2C EEPROM (non-volatile RAM) support" @@ -31,10 +29,8 @@ Index: linux-2.6.25.20/arch/cris/arch-v10/drivers/Kconfig help Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C driver. Select size option: Probed, 2k, 8k, 16k. -Index: linux-2.6.25.20/arch/cris/arch-v10/drivers/Makefile -=================================================================== ---- linux-2.6.25.20.orig/arch/cris/arch-v10/drivers/Makefile 2009-02-09 09:30:41.000000000 +0100 -+++ linux-2.6.25.20/arch/cris/arch-v10/drivers/Makefile 2009-02-09 09:35:39.000000000 +0100 +--- a/arch/cris/arch-v10/drivers/Makefile ++++ b/arch/cris/arch-v10/drivers/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o diff --git a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch index 7ac24a474..403255066 100644 --- a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch +++ b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.28.9/drivers/serial/crisv10.c -=================================================================== ---- linux-2.6.28.9.orig/drivers/serial/crisv10.c 2009-04-10 12:58:18.000000000 +0200 -+++ linux-2.6.28.9/drivers/serial/crisv10.c 2009-04-10 12:58:22.000000000 +0200 -@@ -28,12 +28,15 @@ +--- a/drivers/serial/crisv10.c ++++ b/drivers/serial/crisv10.c +@@ -28,12 +28,15 @@ static char *serial_version = "$Revision #include <linux/mutex.h> #include <linux/bitops.h> #include <linux/device.h> @@ -20,7 +18,7 @@ Index: linux-2.6.28.9/drivers/serial/crisv10.c #include <arch/svinto.h> -@@ -457,7 +460,6 @@ +@@ -457,7 +460,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) @@ -28,7 +26,7 @@ Index: linux-2.6.28.9/drivers/serial/crisv10.c #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif -@@ -4221,151 +4223,132 @@ +@@ -4221,151 +4223,132 @@ rs_open(struct tty_struct *tty, struct f return 0; } @@ -249,7 +247,7 @@ Index: linux-2.6.28.9/drivers/serial/crisv10.c &serial_version[11]); /* "$Revision: x.yy" */ } -@@ -4389,9 +4372,11 @@ +@@ -4389,9 +4372,11 @@ static const struct tty_operations rs_op .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, diff --git a/target/linux/generic-2.6/patches-2.6.21/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.21/100-netfilter_layer7_2.21.patch index 16b5fa2f3..403b7d0e4 100644 --- a/target/linux/generic-2.6/patches-2.6.21/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.21/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -128,6 +128,22 @@ +@@ -128,6 +128,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c -@@ -163,6 +163,12 @@ +@@ -163,6 +163,12 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif @@ -56,7 +56,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -640,6 +640,27 @@ +@@ -640,6 +640,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -86,7 +86,7 @@ depends on NETFILTER_XTABLES --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -68,6 +68,7 @@ +@@ -68,6 +68,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) + obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -96,7 +96,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -352,6 +352,14 @@ +@@ -352,6 +352,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -113,7 +113,7 @@ BUG_ON(list_empty(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -195,6 +195,11 @@ +@@ -195,6 +195,11 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.21/101-netfilter_layer7_pktmatch.patch b/target/linux/generic-2.6/patches-2.6.21/101-netfilter_layer7_pktmatch.patch index cdadbe198..d3129eed7 100644 --- a/target/linux/generic-2.6/patches-2.6.21/101-netfilter_layer7_pktmatch.patch +++ b/target/linux/generic-2.6/patches-2.6.21/101-netfilter_layer7_pktmatch.patch @@ -1,6 +1,6 @@ --- a/include/linux/netfilter/xt_layer7.h +++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ struct xt_layer7_info { char protocol[MAX_PROTOCOL_LEN]; char invert:1; char pattern[MAX_PATTERN_LEN]; @@ -10,7 +10,7 @@ #endif /* _XT_LAYER7_H */ --- a/net/netfilter/xt_layer7.c +++ b/net/netfilter/xt_layer7.c -@@ -296,34 +296,36 @@ +@@ -296,34 +296,36 @@ static int match_no_append(struct nf_con } /* add the new app data to the conntrack. Return number of bytes added. */ @@ -61,7 +61,7 @@ return length; } -@@ -410,7 +412,7 @@ +@@ -410,7 +412,7 @@ match(const struct sk_buff *skbin, struct xt_layer7_info * info = (struct xt_layer7_info *)matchinfo; enum ip_conntrack_info master_ctinfo, ctinfo; struct nf_conn *master_conntrack, *conntrack; @@ -70,7 +70,7 @@ unsigned int pattern_result, appdatalen; regexp * comppattern; -@@ -438,8 +440,8 @@ +@@ -438,8 +440,8 @@ match(const struct sk_buff *skbin, master_conntrack = master_ct(master_conntrack); /* if we've classified it or seen too many packets */ @@ -81,7 +81,7 @@ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -@@ -472,6 +474,25 @@ +@@ -472,6 +474,25 @@ match(const struct sk_buff *skbin, /* the return value gets checked later, when we're ready to use it */ comppattern = compile_and_cache(info->pattern, info->protocol); diff --git a/target/linux/generic-2.6/patches-2.6.23/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.23/100-netfilter_layer7_2.21.patch index d8b58bf09..c1af264ea 100644 --- a/target/linux/generic-2.6/patches-2.6.23/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.23/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -127,6 +127,22 @@ +@@ -127,6 +127,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -633,6 +633,27 @@ +@@ -633,6 +633,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -71,7 +71,7 @@ depends on NETFILTER_XTABLES --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -71,6 +71,7 @@ +@@ -71,6 +71,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) + obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -81,7 +81,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -207,6 +207,14 @@ +@@ -207,6 +207,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -98,7 +98,7 @@ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -179,6 +179,11 @@ +@@ -179,6 +179,11 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.25/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.25/100-netfilter_layer7_2.21.patch index b91605d6c..307f08860 100644 --- a/target/linux/generic-2.6/patches-2.6.25/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.25/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -124,6 +124,22 @@ +@@ -124,6 +124,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -735,6 +735,27 @@ +@@ -735,6 +735,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -71,7 +71,7 @@ depends on NETFILTER_XTABLES --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -77,6 +77,7 @@ +@@ -77,6 +77,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST) obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -81,7 +81,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -208,6 +208,14 @@ +@@ -208,6 +208,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -98,7 +98,7 @@ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -181,6 +181,12 @@ +@@ -181,6 +181,12 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.25/101-netfilter_layer7_pktmatch.patch b/target/linux/generic-2.6/patches-2.6.25/101-netfilter_layer7_pktmatch.patch index d2088dfd9..7b0dd43c0 100644 --- a/target/linux/generic-2.6/patches-2.6.25/101-netfilter_layer7_pktmatch.patch +++ b/target/linux/generic-2.6/patches-2.6.25/101-netfilter_layer7_pktmatch.patch @@ -1,6 +1,6 @@ --- a/include/linux/netfilter/xt_layer7.h +++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ struct xt_layer7_info { char protocol[MAX_PROTOCOL_LEN]; char pattern[MAX_PATTERN_LEN]; u_int8_t invert; @@ -10,7 +10,7 @@ #endif /* _XT_LAYER7_H */ --- a/net/netfilter/xt_layer7.c +++ b/net/netfilter/xt_layer7.c -@@ -314,34 +314,36 @@ +@@ -314,34 +314,36 @@ static int match_no_append(struct nf_con } /* add the new app data to the conntrack. Return number of bytes added. */ @@ -61,7 +61,7 @@ return length; } -@@ -438,7 +440,7 @@ +@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin, enum ip_conntrack_info master_ctinfo, ctinfo; struct nf_conn *master_conntrack, *conntrack; @@ -70,7 +70,7 @@ unsigned int pattern_result, appdatalen; regexp * comppattern; -@@ -466,9 +468,8 @@ +@@ -466,9 +468,8 @@ match(const struct sk_buff *skbin, master_conntrack = master_ct(master_conntrack); /* if we've classified it or seen too many packets */ @@ -82,7 +82,7 @@ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -@@ -500,6 +501,25 @@ +@@ -500,6 +501,25 @@ match(const struct sk_buff *skbin, /* the return value gets checked later, when we're ready to use it */ comppattern = compile_and_cache(info->pattern, info->protocol); diff --git a/target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.21.patch index 1be8568f1..e71a578b7 100644 --- a/target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -124,6 +124,22 @@ +@@ -124,6 +124,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -749,6 +749,27 @@ +@@ -749,6 +749,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -71,7 +71,7 @@ depends on NETFILTER_XTABLES --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -78,6 +78,7 @@ +@@ -78,6 +78,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST) obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -81,7 +81,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -205,6 +205,14 @@ +@@ -205,6 +205,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -98,7 +98,7 @@ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -174,6 +174,12 @@ +@@ -174,6 +174,12 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch b/target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch index 81ca6cee7..e5481df33 100644 --- a/target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch +++ b/target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch @@ -1,6 +1,6 @@ --- a/include/linux/netfilter/xt_layer7.h +++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ struct xt_layer7_info { char protocol[MAX_PROTOCOL_LEN]; char pattern[MAX_PATTERN_LEN]; u_int8_t invert; @@ -10,7 +10,7 @@ #endif /* _XT_LAYER7_H */ --- a/net/netfilter/xt_layer7.c +++ b/net/netfilter/xt_layer7.c -@@ -314,34 +314,36 @@ +@@ -314,34 +314,36 @@ static int match_no_append(struct nf_con } /* add the new app data to the conntrack. Return number of bytes added. */ @@ -60,7 +60,7 @@ return length; } -@@ -438,7 +440,7 @@ +@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin, enum ip_conntrack_info master_ctinfo, ctinfo; struct nf_conn *master_conntrack, *conntrack; @@ -69,7 +69,7 @@ unsigned int pattern_result, appdatalen; regexp * comppattern; -@@ -466,8 +468,8 @@ +@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin, master_conntrack = master_ct(master_conntrack); /* if we've classified it or seen too many packets */ @@ -80,7 +80,7 @@ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -@@ -500,6 +502,25 @@ +@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin, /* the return value gets checked later, when we're ready to use it */ comppattern = compile_and_cache(info->pattern, info->protocol); diff --git a/target/linux/generic-2.6/patches-2.6.27/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.27/100-netfilter_layer7_2.21.patch index 43da4e253..e70a5fe3f 100644 --- a/target/linux/generic-2.6/patches-2.6.27/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.27/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -118,6 +118,22 @@ +@@ -118,6 +118,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -757,6 +757,27 @@ +@@ -757,6 +757,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -71,7 +71,7 @@ depends on NETFILTER_XTABLES --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -78,6 +78,7 @@ +@@ -78,6 +78,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST) obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -81,7 +81,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -206,6 +206,14 @@ +@@ -206,6 +206,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -98,7 +98,7 @@ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -162,6 +162,12 @@ +@@ -162,6 +162,12 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.27/101-netfilter_layer7_pktmatch.patch b/target/linux/generic-2.6/patches-2.6.27/101-netfilter_layer7_pktmatch.patch index 4931b1bdb..f65e301fd 100644 --- a/target/linux/generic-2.6/patches-2.6.27/101-netfilter_layer7_pktmatch.patch +++ b/target/linux/generic-2.6/patches-2.6.27/101-netfilter_layer7_pktmatch.patch @@ -1,6 +1,6 @@ --- a/include/linux/netfilter/xt_layer7.h +++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ struct xt_layer7_info { char protocol[MAX_PROTOCOL_LEN]; char pattern[MAX_PATTERN_LEN]; u_int8_t invert; @@ -10,7 +10,7 @@ #endif /* _XT_LAYER7_H */ --- a/net/netfilter/xt_layer7.c +++ b/net/netfilter/xt_layer7.c -@@ -314,33 +314,35 @@ +@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con } /* add the new app data to the conntrack. Return number of bytes added. */ @@ -60,7 +60,7 @@ return length; } -@@ -438,7 +440,7 @@ +@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin, enum ip_conntrack_info master_ctinfo, ctinfo; struct nf_conn *master_conntrack, *conntrack; @@ -69,7 +69,7 @@ unsigned int pattern_result, appdatalen; regexp * comppattern; -@@ -466,8 +468,8 @@ +@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin, master_conntrack = master_ct(master_conntrack); /* if we've classified it or seen too many packets */ @@ -80,7 +80,7 @@ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -@@ -500,6 +502,25 @@ +@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin, /* the return value gets checked later, when we're ready to use it */ comppattern = compile_and_cache(info->pattern, info->protocol); diff --git a/target/linux/generic-2.6/patches-2.6.27/208-rtl8110sb_fix.patch b/target/linux/generic-2.6/patches-2.6.27/208-rtl8110sb_fix.patch index d3cb74fa1..4d8dfeb55 100644 --- a/target/linux/generic-2.6/patches-2.6.27/208-rtl8110sb_fix.patch +++ b/target/linux/generic-2.6/patches-2.6.27/208-rtl8110sb_fix.patch @@ -1,6 +1,6 @@ --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c -@@ -1507,7 +1507,7 @@ static const struct rtl_cfg_info { +@@ -1527,7 +1527,7 @@ static const struct rtl_cfg_info { .hw_start = rtl_hw_start_8169, .region = 1, .align = 0, @@ -9,7 +9,7 @@ RxFIFOOver | TxErr | TxOK | RxOK | RxErr, .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_GMII -@@ -1516,7 +1516,7 @@ static const struct rtl_cfg_info { +@@ -1536,7 +1536,7 @@ static const struct rtl_cfg_info { .hw_start = rtl_hw_start_8168, .region = 2, .align = 8, @@ -18,7 +18,7 @@ TxErr | TxOK | RxOK | RxErr, .napi_event = TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI -@@ -1525,7 +1525,7 @@ static const struct rtl_cfg_info { +@@ -1545,7 +1545,7 @@ static const struct rtl_cfg_info { .hw_start = rtl_hw_start_8101, .region = 2, .align = 8, @@ -27,7 +27,7 @@ RxFIFOOver | TxErr | TxOK | RxOK | RxErr, .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_MSI -@@ -2866,10 +2866,12 @@ static irqreturn_t rtl8169_interrupt(int +@@ -2879,10 +2879,12 @@ static irqreturn_t rtl8169_interrupt(int goto out; } diff --git a/target/linux/generic-2.6/patches-2.6.27/977-textsearch_kconfig_hacks.patch b/target/linux/generic-2.6/patches-2.6.27/977-textsearch_kconfig_hacks.patch index 9ce0484ac..6370139ef 100644 --- a/target/linux/generic-2.6/patches-2.6.27/977-textsearch_kconfig_hacks.patch +++ b/target/linux/generic-2.6/patches-2.6.27/977-textsearch_kconfig_hacks.patch @@ -1,6 +1,6 @@ ---- a/lib/Kconfig 2009-03-23 23:04:09.000000000 +0100 -+++ b/lib/Kconfig 2009-03-26 12:43:09.000000000 +0100 -@@ -122,13 +122,13 @@ +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -122,13 +122,13 @@ config TEXTSEARCH boolean config TEXTSEARCH_KMP diff --git a/target/linux/generic-2.6/patches-2.6.29/100-netfilter_layer7_2.21.patch b/target/linux/generic-2.6/patches-2.6.29/100-netfilter_layer7_2.21.patch index 165202102..61259b4c8 100644 --- a/target/linux/generic-2.6/patches-2.6.29/100-netfilter_layer7_2.21.patch +++ b/target/linux/generic-2.6/patches-2.6.29/100-netfilter_layer7_2.21.patch @@ -16,7 +16,7 @@ +#endif /* _XT_LAYER7_H */ --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h -@@ -118,6 +118,22 @@ +@@ -118,6 +118,22 @@ struct nf_conn u_int32_t secmark; #endif @@ -41,7 +41,7 @@ --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig -@@ -794,6 +794,27 @@ +@@ -794,6 +794,27 @@ config NETFILTER_XT_MATCH_STATE To compile it as a module, choose M here. If unsure, say N. @@ -71,7 +71,7 @@ depends on NETFILTER_ADVANCED --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile -@@ -84,6 +84,7 @@ +@@ -84,6 +84,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o @@ -81,7 +81,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -202,6 +202,14 @@ +@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n * too. */ nf_ct_remove_expectations(ct); @@ -98,7 +98,7 @@ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode)); --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -165,6 +165,12 @@ +@@ -165,6 +165,12 @@ static int ct_seq_show(struct seq_file * return -ENOSPC; #endif diff --git a/target/linux/generic-2.6/patches-2.6.29/101-netfilter_layer7_pktmatch.patch b/target/linux/generic-2.6/patches-2.6.29/101-netfilter_layer7_pktmatch.patch index 4931b1bdb..f65e301fd 100644 --- a/target/linux/generic-2.6/patches-2.6.29/101-netfilter_layer7_pktmatch.patch +++ b/target/linux/generic-2.6/patches-2.6.29/101-netfilter_layer7_pktmatch.patch @@ -1,6 +1,6 @@ --- a/include/linux/netfilter/xt_layer7.h +++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ +@@ -8,6 +8,7 @@ struct xt_layer7_info { char protocol[MAX_PROTOCOL_LEN]; char pattern[MAX_PATTERN_LEN]; u_int8_t invert; @@ -10,7 +10,7 @@ #endif /* _XT_LAYER7_H */ --- a/net/netfilter/xt_layer7.c +++ b/net/netfilter/xt_layer7.c -@@ -314,33 +314,35 @@ +@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con } /* add the new app data to the conntrack. Return number of bytes added. */ @@ -60,7 +60,7 @@ return length; } -@@ -438,7 +440,7 @@ +@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin, enum ip_conntrack_info master_ctinfo, ctinfo; struct nf_conn *master_conntrack, *conntrack; @@ -69,7 +69,7 @@ unsigned int pattern_result, appdatalen; regexp * comppattern; -@@ -466,8 +468,8 @@ +@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin, master_conntrack = master_ct(master_conntrack); /* if we've classified it or seen too many packets */ @@ -80,7 +80,7 @@ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -@@ -500,6 +502,25 @@ +@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin, /* the return value gets checked later, when we're ready to use it */ comppattern = compile_and_cache(info->pattern, info->protocol); diff --git a/target/linux/generic-2.6/patches-2.6.29/208-rtl8110sb_fix.patch b/target/linux/generic-2.6/patches-2.6.29/208-rtl8110sb_fix.patch index 1aea706de..7f46c0b51 100644 --- a/target/linux/generic-2.6/patches-2.6.29/208-rtl8110sb_fix.patch +++ b/target/linux/generic-2.6/patches-2.6.29/208-rtl8110sb_fix.patch @@ -27,7 +27,7 @@ RxFIFOOver | TxErr | TxOK | RxOK | RxErr, .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_MSI -@@ -3581,10 +3581,12 @@ static irqreturn_t rtl8169_interrupt(int +@@ -3582,10 +3582,12 @@ static irqreturn_t rtl8169_interrupt(int goto out; } diff --git a/target/linux/generic-2.6/patches-2.6.29/980-vm_exports.patch b/target/linux/generic-2.6/patches-2.6.29/980-vm_exports.patch index bad3af96e..f4942cb3c 100644 --- a/target/linux/generic-2.6/patches-2.6.29/980-vm_exports.patch +++ b/target/linux/generic-2.6/patches-2.6.29/980-vm_exports.patch @@ -68,7 +68,7 @@ * macro override instead of weak attribute alias, to workaround --- a/kernel/sched.c +++ b/kernel/sched.c -@@ -5121,6 +5121,7 @@ int can_nice(const struct task_struct *p +@@ -5178,6 +5178,7 @@ int can_nice(const struct task_struct *p return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur || capable(CAP_SYS_NICE)); } diff --git a/target/linux/orion/patches/200-dt2_board_support.patch b/target/linux/orion/patches/200-dt2_board_support.patch index bf82ed760..4735a221e 100644 --- a/target/linux/orion/patches/200-dt2_board_support.patch +++ b/target/linux/orion/patches/200-dt2_board_support.patch @@ -1,7 +1,6 @@ -diff -ruN linux-2.6.28.5.orig/arch/arm/mach-orion5x/Kconfig linux-2.6.28.5/arch/arm/mach-orion5x/Kconfig ---- linux-2.6.28.5.orig/arch/arm/mach-orion5x/Kconfig 2009-02-21 00:41:27.000000000 +0200 -+++ linux-2.6.28.5/arch/arm/mach-orion5x/Kconfig 2009-02-28 10:06:24.000000000 +0200 -@@ -16,6 +16,13 @@ +--- a/arch/arm/mach-orion5x/Kconfig ++++ b/arch/arm/mach-orion5x/Kconfig +@@ -16,6 +16,13 @@ config MACH_RD88F5182 Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 @@ -15,12 +14,10 @@ diff -ruN linux-2.6.28.5.orig/arch/arm/mach-orion5x/Kconfig linux-2.6.28.5/arch/ config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO -diff -ruN linux-2.6.28.5.orig/arch/arm/mach-orion5x/Makefile linux-2.6.28.5/arch/arm/mach-orion5x/Makefile ---- linux-2.6.28.5.orig/arch/arm/mach-orion5x/Makefile 2009-02-21 00:41:27.000000000 +0200 -+++ linux-2.6.28.5/arch/arm/mach-orion5x/Makefile 2009-02-28 10:07:35.000000000 +0200 -@@ -17,3 +17,4 @@ +--- a/arch/arm/mach-orion5x/Makefile ++++ b/arch/arm/mach-orion5x/Makefile +@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-se obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o +obj-$(CONFIG_MACH_DT2) += dt2-setup.o - diff --git a/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch b/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch index 5786803e4..49dea20c6 100644 --- a/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch +++ b/target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch @@ -7,11 +7,9 @@ Tested-by: Florian Fainelli <florian@openwrt.org> arch/mips/pci/pci-rc32434.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) -diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c -index 1c2821e..71f7d27 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c -@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void) +@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init static int __init rc32434_pci_init(void) { @@ -36,7 +34,3 @@ index 1c2821e..71f7d27 100644 register_pci_controller(&rc32434_controller); rc32434_sync(); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch b/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch index 49f9f4b3b..80272aec4 100644 --- a/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch +++ b/target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch @@ -8,11 +8,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> arch/mips/rb532/gpio.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) -diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c -index 0e84c8a..e35cb75 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c -@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval, +@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigne unsigned long flags; u32 val; @@ -28,8 +26,3 @@ index 0e84c8a..e35cb75 100644 writel(val, ioaddr); local_irq_restore(flags); --- -1.5.6.4 - - - diff --git a/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch b/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch index d1d73ac9c..e1e417a55 100644 --- a/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch +++ b/target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch @@ -10,9 +10,8 @@ be cleared. This is being done at the end of rb532_pata_irq_handler. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> --- -diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c ---- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-02-20 23:41:27.000000000 +0100 -+++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:21:06.000000000 +0100 +--- a/drivers/ata/pata_rb532_cf.c ++++ b/drivers/ata/pata_rb532_cf.c @@ -31,6 +31,7 @@ #include <scsi/scsi_host.h> @@ -21,7 +20,7 @@ diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ #define DRV_NAME "pata-rb532-cf" #define DRV_VERSION "0.1.0" -@@ -63,8 +64,8 @@ +@@ -63,8 +64,8 @@ static inline void rb532_pata_finish_io( ata_sff_sync might be sufficient. */ ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); @@ -32,7 +31,7 @@ diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ } static void rb532_pata_exec_command(struct ata_port *ap, -@@ -113,13 +114,15 @@ +@@ -113,13 +114,15 @@ static irqreturn_t rb532_pata_irq_handle struct rb532_cf_info *info = ah->private_data; if (gpio_get_value(info->gpio_line)) { diff --git a/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch b/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch index 1af14ad6f..ff1f8dc8c 100644 --- a/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch +++ b/target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch @@ -10,10 +10,9 @@ original driver always transfers 512 Bytes at once. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com> --- -diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c ---- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-03-15 13:24:24.000000000 +0100 -+++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:26:19.000000000 +0100 -@@ -82,13 +82,10 @@ +--- a/drivers/ata/pata_rb532_cf.c ++++ b/drivers/ata/pata_rb532_cf.c +@@ -82,13 +82,10 @@ static unsigned int rb532_pata_data_xfer void __iomem *ioaddr = ap->ioaddr.data_addr; int retlen = buflen; diff --git a/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch b/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch index 7a25bcb68..72f00eb0d 100644 --- a/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch +++ b/target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch @@ -5,10 +5,9 @@ bytes, so alter the return value accordingly. Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- -diff -urN linux-2.6.28.7/drivers/ata/pata_rb532_cf.c linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c ---- linux-2.6.28.7/drivers/ata/pata_rb532_cf.c 2009-03-15 13:29:09.000000000 +0100 -+++ linux-2.6.28.7.new/drivers/ata/pata_rb532_cf.c 2009-03-15 13:29:46.000000000 +0100 -@@ -88,7 +88,7 @@ +--- a/drivers/ata/pata_rb532_cf.c ++++ b/drivers/ata/pata_rb532_cf.c +@@ -88,7 +88,7 @@ static unsigned int rb532_pata_data_xfer readsl(ioaddr, buf, buflen / sizeof(u32)); rb532_pata_finish_io(adev->link->ap); diff --git a/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch b/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch index 5f2ed2f2f..1127019fe 100644 --- a/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch +++ b/target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch @@ -1,6 +1,5 @@ -diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S ---- linux-2.6.27.5/arch/mips/kernel/head.S 2008-11-15 19:24:03.000000000 +0100 -+++ linux-2.6.27.5.new/arch/mips/kernel/head.S 2008-11-15 19:24:55.000000000 +0100 +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S @@ -123,6 +123,11 @@ j kernel_entry diff --git a/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch b/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch index 1db2e0ecb..c1c56d960 100644 --- a/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch +++ b/target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch @@ -9,8 +9,6 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index fefb33d..e30c2f4 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -84,7 +84,10 @@ @@ -25,7 +23,3 @@ index fefb33d..e30c2f4 100644 #define KORINA_RDS_MASK (KORINA_NUM_RDS - 1) #define KORINA_TDS_MASK (KORINA_NUM_TDS - 1) #define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc)) --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch b/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch index 4eec6fd05..364d307fc 100644 --- a/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch +++ b/target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch @@ -5,11 +5,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index e30c2f4..65b8487 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev) +@@ -905,6 +905,8 @@ static int korina_restart(struct net_dev korina_free_ring(dev); @@ -18,7 +16,7 @@ index e30c2f4..65b8487 100644 ret = korina_init(dev); if (ret < 0) { printk(KERN_ERR DRV_NAME "%s: cannot restart device\n", -@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev) +@@ -1071,6 +1073,8 @@ static int korina_close(struct net_devic korina_free_ring(dev); @@ -27,7 +25,3 @@ index e30c2f4..65b8487 100644 free_irq(lp->rx_irq, dev); free_irq(lp->tx_irq, dev); free_irq(lp->ovr_irq, dev); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch b/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch index 177678b98..bfb91a91a 100644 --- a/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch +++ b/target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch @@ -4,9 +4,9 @@ packets and korina_rx is called again (and again and again and ...). Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- ---- a/drivers/net/korina.c 2009-01-19 23:19:10.000000000 +0100 -+++ b/drivers/net/korina.c 2009-01-19 23:25:31.000000000 +0100 -@@ -353,15 +353,20 @@ +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -353,15 +353,20 @@ static int korina_rx(struct net_device * struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done]; struct sk_buff *skb, *skb_new; u8 *pkt_buf; @@ -28,7 +28,7 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> /* Update statistics counters */ if (devcs & ETH_RX_CRC) dev->stats.rx_crc_errors++; -@@ -384,64 +389,53 @@ +@@ -384,64 +389,53 @@ static int korina_rx(struct net_device * * in Rc32434 (errata ref #077) */ dev->stats.rx_errors++; dev->stats.rx_dropped++; diff --git a/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch b/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch index c5e1b9a40..d9e6f33eb 100644 --- a/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch +++ b/target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch @@ -5,9 +5,9 @@ Before this change, the driver received absolutely nothing. Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- ---- a/drivers/net/korina.c 2009-01-19 23:26:19.000000000 +0100 -+++ b/drivers/net/korina.c 2009-01-19 23:27:06.000000000 +0100 -@@ -330,7 +330,7 @@ +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -330,7 +330,7 @@ static irqreturn_t korina_rx_dma_interru dmas = readl(&lp->rx_dma_regs->dmas); if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) { diff --git a/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch index 101e869d0..665e09ae4 100644 --- a/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch +++ b/target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch @@ -7,9 +7,9 @@ upstream. Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- ---- a/drivers/net/korina.c 2009-01-19 23:27:41.000000000 +0100 -+++ b/drivers/net/korina.c 2009-01-19 23:29:08.000000000 +0100 -@@ -330,12 +330,12 @@ +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -330,12 +330,12 @@ static irqreturn_t korina_rx_dma_interru dmas = readl(&lp->rx_dma_regs->dmas); if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) { @@ -24,7 +24,7 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> if (dmas & DMA_STAT_ERR) printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name); -@@ -621,11 +621,11 @@ +@@ -621,11 +621,11 @@ korina_tx_dma_interrupt(int irq, void *d dmas = readl(&lp->tx_dma_regs->dmas); if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) { diff --git a/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch b/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch index 6babc3230..88fcc53a6 100644 --- a/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch +++ b/target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch @@ -10,11 +10,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 22 +++++++++++----------- 1 files changed, 11 insertions(+), 11 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index dced5e7..f200175 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_ struct korina_private *lp = netdev_priv(dev); unsigned long flags; u32 length; @@ -23,7 +21,7 @@ index dced5e7..f200175 100644 struct dma_desc *td; spin_lock_irqsave(&lp->lock, flags); -@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_ /* Setup the transmit descriptor. */ dma_cache_inv((u32) td, sizeof(*td)); td->ca = CPHYSADDR(skb->data); @@ -34,7 +32,7 @@ index dced5e7..f200175 100644 if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) { if (lp->tx_chain_status == desc_empty) { -@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_ td->control = DMA_COUNT(length) | DMA_DESC_COF | DMA_DESC_IOF; /* Move tail */ @@ -43,7 +41,7 @@ index dced5e7..f200175 100644 /* Write to NDPTR */ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &lp->tx_dma_regs->dmandptr); -@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_ td->control = DMA_COUNT(length) | DMA_DESC_COF | DMA_DESC_IOF; /* Link to prev */ @@ -59,7 +57,7 @@ index dced5e7..f200175 100644 /* Write to NDPTR */ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); -@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_ td->control = DMA_COUNT(length) | DMA_DESC_COF | DMA_DESC_IOF; /* Move tail */ @@ -81,7 +79,3 @@ index dced5e7..f200175 100644 } } dma_cache_wback((u32) td, sizeof(*td)); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch b/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch index 79ae024b6..bccd307c1 100644 --- a/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch +++ b/target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch @@ -7,11 +7,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index f200175..bd33fa9 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) +@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_ /* Move tail */ lp->tx_chain_tail = chain_next; lp->tx_chain_status = desc_filled; @@ -19,7 +17,3 @@ index f200175..bd33fa9 100644 } else { /* Update tail */ td->control = DMA_COUNT(length) | --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch b/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch index 74059fbeb..12b8036fa 100644 --- a/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch +++ b/target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch @@ -8,11 +8,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index bd33fa9..1d6e48e 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev) +@@ -998,14 +998,14 @@ static int korina_open(struct net_device * that handles the Done Finished * Ovr and Und Events */ ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt, @@ -29,7 +27,7 @@ index bd33fa9..1d6e48e 100644 if (ret < 0) { printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n", dev->name, lp->tx_irq); -@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev) +@@ -1014,7 +1014,7 @@ static int korina_open(struct net_device /* Install handler for overrun error. */ ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt, @@ -38,7 +36,7 @@ index bd33fa9..1d6e48e 100644 if (ret < 0) { printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n", dev->name, lp->ovr_irq); -@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev) +@@ -1023,7 +1023,7 @@ static int korina_open(struct net_device /* Install handler for underflow error. */ ret = request_irq(lp->und_irq, &korina_und_interrupt, @@ -47,7 +45,3 @@ index bd33fa9..1d6e48e 100644 if (ret < 0) { printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n", dev->name, lp->und_irq); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch b/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch index ab82cb5af..19dd71ca7 100644 --- a/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch +++ b/target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch @@ -7,11 +7,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index 60ae7bf..75010ca 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { +@@ -738,6 +738,7 @@ static struct ethtool_ops netdev_ethtool static void korina_alloc_ring(struct net_device *dev) { struct korina_private *lp = netdev_priv(dev); @@ -19,7 +17,7 @@ index 60ae7bf..75010ca 100644 int i; /* Initialize the transmit descriptors */ -@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) +@@ -753,8 +754,6 @@ static void korina_alloc_ring(struct net /* Initialize the receive descriptors */ for (i = 0; i < KORINA_NUM_RDS; i++) { @@ -28,7 +26,3 @@ index 60ae7bf..75010ca 100644 skb = dev_alloc_skb(KORINA_RBSIZE + 2); if (!skb) break; --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch b/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch index 0484f2cbe..5b684b40c 100644 --- a/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch +++ b/target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch @@ -9,11 +9,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index 1d6e48e..67fbdf4 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev) +@@ -766,11 +766,12 @@ static void korina_alloc_ring(struct net lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); } @@ -30,7 +28,3 @@ index 1d6e48e..67fbdf4 100644 lp->rx_chain_head = 0; lp->rx_chain_tail = 0; lp->rx_chain_status = desc_empty; --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch b/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch index f9f8daccc..4ec3d0e62 100644 --- a/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch +++ b/target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch @@ -8,11 +8,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index 67fbdf4..60ae7bf 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) +@@ -415,6 +415,9 @@ static int korina_rx(struct net_device * if (devcs & ETH_RX_MP) dev->stats.multicast++; @@ -21,8 +19,4 @@ index 67fbdf4..60ae7bf 100644 + lp->rx_skb[lp->rx_next_done] = skb_new; } - --- -1.5.6.4 - - + rd->devcs = 0; diff --git a/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch b/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch index bec351488..e54d6113e 100644 --- a/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch +++ b/target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch @@ -7,19 +7,17 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> drivers/net/korina.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) -diff --git a/drivers/net/korina.c b/drivers/net/korina.c -index 75010ca..56b4db2 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c -@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit) +@@ -418,6 +418,7 @@ static int korina_rx(struct net_device * /* 16 bit align */ skb_reserve(skb_new, 2); + skb_new->dev = dev; lp->rx_skb[lp->rx_next_done] = skb_new; } - -@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev) + rd->devcs = 0; +@@ -761,6 +762,7 @@ static void korina_alloc_ring(struct net if (!skb) break; skb_reserve(skb, 2); @@ -27,7 +25,3 @@ index 75010ca..56b4db2 100644 lp->rx_skb[i] = skb; lp->rd_ring[i].control = DMA_DESC_IOD | DMA_COUNT(KORINA_RBSIZE); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch b/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch index 9aaeef334..bb4b47001 100644 --- a/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch +++ b/target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch @@ -7,11 +7,9 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> arch/mips/rb532/devices.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) -diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c -index 9b6b744..3c74561 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c -@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = { +@@ -86,7 +86,7 @@ static struct korina_device korina_dev0_ static struct platform_device korina_dev0 = { .id = -1, .name = "korina", @@ -20,7 +18,3 @@ index 9b6b744..3c74561 100644 .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch b/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch index ae42a4dbc..e50610342 100644 --- a/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch +++ b/target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch @@ -8,8 +8,6 @@ Signed-off-by: Phil Sutter <n0-1@freewrt.org> arch/mips/rb532/serial.c | 2 +- 2 files changed, 27 insertions(+), 1 deletions(-) -diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c -index c1c2918..9b6b744 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -24,6 +24,7 @@ @@ -29,7 +27,7 @@ index c1c2918..9b6b744 100644 static struct resource korina_dev0_res[] = { { .name = "korina_regs", -@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = { +@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt .num_resources = ARRAY_SIZE(rb532_wdt_res), }; @@ -62,7 +60,7 @@ index c1c2918..9b6b744 100644 &rb532_wdt }; -@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void) +@@ -294,6 +317,9 @@ static int __init plat_setup_devices(voi /* Initialise the NAND device */ rb532_nand_setup(); @@ -72,8 +70,6 @@ index c1c2918..9b6b744 100644 return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } -diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c -index 3e0d7ec..00ed19f 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -36,7 +36,7 @@ @@ -85,7 +81,3 @@ index 3e0d7ec..00ed19f 100644 .line = 0, .irq = UART0_IRQ, .iotype = UPIO_MEM, --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch b/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch index 64a6d8934..ab60afc1e 100644 --- a/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch +++ b/target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch @@ -3,11 +3,9 @@ initialisation has to be the same as cf_slot0_res and nand_slot0_res. Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- -diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c -index d75eb19..40deb11 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c -@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = { +@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_r static struct resource rb532_dev3_ctl_res[] = { { .name = "dev3_ctl", @@ -16,7 +14,7 @@ index d75eb19..40deb11 100644 .flags = IORESOURCE_MEM, } }; -@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void) +@@ -251,6 +249,9 @@ int __init rb532_gpio_init(void) /* Register our GPIO chip */ gpiochip_add(&rb532_gpio_chip->chip); @@ -26,7 +24,3 @@ index d75eb19..40deb11 100644 r = rb532_dev3_ctl_res; dev3.base = ioremap_nocache(r->start, r->end - r->start); --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch b/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch index fc0c77ec2..edad9d868 100644 --- a/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch +++ b/target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch @@ -4,11 +4,9 @@ is wrong. Signed-off-by: Phil Sutter <n0-1@freewrt.org> --- -diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c -index 40deb11..7e0cb4f 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c -@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) +@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, spin_lock_irqsave(&dev3.lock, flags); dev3.state = (dev3.state | or_mask) & ~nand_mask; @@ -17,7 +15,3 @@ index 40deb11..7e0cb4f 100644 spin_unlock_irqrestore(&dev3.lock, flags); } --- -1.5.6.4 - - diff --git a/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch index 709160980..3c7cccacb 100644 --- a/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch +++ b/target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch @@ -1,6 +1,6 @@ ---- a/arch/mips/rb532/devices.c 2009-01-25 13:36:15.000000000 +0100 -+++ b/arch/mips/rb532/devices.c 2009-01-25 14:00:56.000000000 +0100 -@@ -119,6 +119,19 @@ +--- a/arch/mips/rb532/devices.c ++++ b/arch/mips/rb532/devices.c +@@ -119,6 +119,19 @@ static struct platform_device cf_slot0 = }; /* Resources and device for NAND */ @@ -20,7 +20,7 @@ static int rb532_dev_ready(struct mtd_info *mtd) { return gpio_get_value(GPIO_RDY); -@@ -277,6 +290,16 @@ +@@ -277,6 +290,16 @@ static void __init parse_mac_addr(char * /* NAND definitions */ #define NAND_CHIP_DELAY 25 @@ -37,7 +37,7 @@ static void __init rb532_nand_setup(void) { switch (mips_machtype) { -@@ -296,6 +319,8 @@ +@@ -296,6 +319,8 @@ static void __init rb532_nand_setup(void rb532_nand_data.chip.partitions = rb532_partition_info; rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; rb532_nand_data.chip.options = NAND_NO_AUTOINCR; diff --git a/target/linux/rdc/patches-2.6.28/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.28/001-rdc3210_flash_map.patch index 4c12471ec..2c35b841a 100644 --- a/target/linux/rdc/patches-2.6.28/001-rdc3210_flash_map.patch +++ b/target/linux/rdc/patches-2.6.28/001-rdc3210_flash_map.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig -@@ -110,6 +110,50 @@ +@@ -112,6 +112,50 @@ config MTD_SUN_UFLASH Sun Microsystems boardsets. This driver will require CFI support in the kernel, so if you did not enable CFI previously, do that now. @@ -53,7 +53,7 @@ depends on X86 && MTD_CFI && MTD_CONCAT --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile -@@ -29,6 +29,7 @@ +@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o diff --git a/target/linux/rdc/patches-2.6.28/003-rootfstype.patch b/target/linux/rdc/patches-2.6.28/003-rootfstype.patch index 55a4cd49f..386e63897 100644 --- a/target/linux/rdc/patches-2.6.28/003-rootfstype.patch +++ b/target/linux/rdc/patches-2.6.28/003-rootfstype.patch @@ -1,6 +1,6 @@ --- a/init/do_mounts.c +++ b/init/do_mounts.c -@@ -163,6 +163,8 @@ +@@ -189,6 +189,8 @@ static void __init get_fs_names(char *pa { char *s = page; diff --git a/target/linux/rdc/patches-2.6.28/004-yenta_mystery.patch b/target/linux/rdc/patches-2.6.28/004-yenta_mystery.patch index 7faabdf7a..4c2e2face 100644 --- a/target/linux/rdc/patches-2.6.28/004-yenta_mystery.patch +++ b/target/linux/rdc/patches-2.6.28/004-yenta_mystery.patch @@ -1,6 +1,6 @@ ---- linux-2.6.24.7.orig/drivers/pcmcia/yenta_socket.c 2008-10-26 08:30:07.000000000 -0700 -+++ linux-2.6.24.7/drivers/pcmcia/yenta_socket.c 2008-10-26 08:54:27.000000000 -0700 -@@ -1171,6 +1171,17 @@ +--- a/drivers/pcmcia/yenta_socket.c ++++ b/drivers/pcmcia/yenta_socket.c +@@ -1174,6 +1174,17 @@ static int __devinit yenta_probe (struct /* We must finish initialization here */ diff --git a/target/linux/rdc/patches-2.6.28/005-fix_amit_breakage.patch b/target/linux/rdc/patches-2.6.28/005-fix_amit_breakage.patch index eabfd04ed..8103e841d 100644 --- a/target/linux/rdc/patches-2.6.28/005-fix_amit_breakage.patch +++ b/target/linux/rdc/patches-2.6.28/005-fix_amit_breakage.patch @@ -1,7 +1,6 @@ -diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/boot.h ---- linux-2.6.24.7.orig/arch/x86/boot/boot.h 2008-10-26 20:18:14.000000000 -0700 -+++ linux-2.6.24.7/arch/x86/boot/boot.h 2008-10-26 20:18:36.000000000 -0700 -@@ -60,7 +60,7 @@ +--- a/arch/x86/boot/boot.h ++++ b/arch/x86/boot/boot.h +@@ -62,7 +62,7 @@ static inline void outl(u32 v, u16 port) { asm volatile("outl %0,%1" : : "a" (v), "dN" (port)); } @@ -10,10 +9,9 @@ diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/b { u32 v; asm volatile("inl %1,%0" : "=a" (v) : "dN" (port)); -diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm.c ---- linux-2.6.24.7.orig/arch/x86/boot/pm.c 2008-10-26 19:55:50.000000000 -0700 -+++ linux-2.6.24.7/arch/x86/boot/pm.c 2008-10-26 21:38:12.000000000 -0700 -@@ -16,6 +16,9 @@ +--- a/arch/x86/boot/pm.c ++++ b/arch/x86/boot/pm.c +@@ -14,6 +14,9 @@ #include "boot.h" #include <asm/segment.h> @@ -23,7 +21,7 @@ diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm. /* * Invoke the realmode switch hook if present; otherwise -@@ -160,6 +163,16 @@ +@@ -156,6 +159,16 @@ void go_to_protected_mode(void) die(); } diff --git a/target/linux/rdc/patches-2.6.28/006-bzip2_lzma_x86.patch b/target/linux/rdc/patches-2.6.28/006-bzip2_lzma_x86.patch index 7e9252e2d..6ebe0585a 100644 --- a/target/linux/rdc/patches-2.6.28/006-bzip2_lzma_x86.patch +++ b/target/linux/rdc/patches-2.6.28/006-bzip2_lzma_x86.patch @@ -1,7 +1,6 @@ -diff -urN linux-2.6.28.9/arch/arm/boot/compressed/Makefile linux-2.6.28.9.new/arch/arm/boot/compressed/Makefile ---- linux-2.6.28.9/arch/arm/boot/compressed/Makefile 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/arch/arm/boot/compressed/Makefile 2009-04-24 14:08:08.000000000 +0200 -@@ -67,8 +67,15 @@ +--- a/arch/arm/boot/compressed/Makefile ++++ b/arch/arm/boot/compressed/Makefile +@@ -67,8 +67,15 @@ endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ @@ -19,7 +18,7 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/Makefile linux-2.6.28.9.new/ar ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) -@@ -95,7 +102,7 @@ +@@ -95,7 +102,7 @@ LDFLAGS_vmlinux += -p --no-undefined -X # would otherwise mess up our GOT table CFLAGS_misc.o := -Dstatic= @@ -28,7 +27,7 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/Makefile linux-2.6.28.9.new/ar $(addprefix $(obj)/, $(OBJS)) FORCE $(call if_changed,ld) @: -@@ -103,7 +110,17 @@ +@@ -103,7 +110,17 @@ $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj $(obj)/piggy.gz: $(obj)/../Image FORCE $(call if_changed,gzip) @@ -47,10 +46,9 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/Makefile linux-2.6.28.9.new/ar CFLAGS_font.o := -Dstatic= -diff -urN linux-2.6.28.9/arch/arm/boot/compressed/misc.c linux-2.6.28.9.new/arch/arm/boot/compressed/misc.c ---- linux-2.6.28.9/arch/arm/boot/compressed/misc.c 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/arch/arm/boot/compressed/misc.c 2009-04-24 14:08:08.000000000 +0200 -@@ -169,116 +169,34 @@ +--- a/arch/arm/boot/compressed/misc.c ++++ b/arch/arm/boot/compressed/misc.c +@@ -169,116 +169,34 @@ static inline __ptr_t memcpy(__ptr_t __d /* * gzip delarations */ @@ -176,7 +174,7 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/misc.c linux-2.6.28.9.new/arch #ifndef arch_error #define arch_error(x) -@@ -301,16 +219,24 @@ +@@ -301,16 +219,24 @@ ulg decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, int arch_id) { @@ -207,7 +205,7 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/misc.c linux-2.6.28.9.new/arch putstr(" done, booting the kernel.\n"); return output_ptr; } -@@ -320,11 +246,8 @@ +@@ -320,11 +246,8 @@ char output_buffer[1500*1024]; int main() { @@ -220,9 +218,8 @@ diff -urN linux-2.6.28.9/arch/arm/boot/compressed/misc.c linux-2.6.28.9.new/arch putstr("done.\n"); return 0; } -diff -urN linux-2.6.28.9/arch/x86/boot/compressed/Makefile linux-2.6.28.9.new/arch/x86/boot/compressed/Makefile ---- linux-2.6.28.9/arch/x86/boot/compressed/Makefile 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/arch/x86/boot/compressed/Makefile 2009-04-24 14:10:01.000000000 +0200 +--- a/arch/x86/boot/compressed/Makefile ++++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # @@ -232,7 +229,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/Makefile linux-2.6.28.9.new/ar KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC -@@ -47,9 +47,17 @@ +@@ -47,9 +47,17 @@ ifeq ($(CONFIG_X86_32),y) ifdef CONFIG_RELOCATABLE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE $(call if_changed,gzip) @@ -250,7 +247,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/Makefile linux-2.6.28.9.new/ar endif LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T -@@ -60,5 +68,9 @@ +@@ -60,5 +68,9 @@ $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bi LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T endif @@ -261,9 +258,8 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/Makefile linux-2.6.28.9.new/ar + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE $(call if_changed,ld) -diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch/x86/boot/compressed/misc.c ---- linux-2.6.28.9/arch/x86/boot/compressed/misc.c 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/arch/x86/boot/compressed/misc.c 2009-04-24 14:08:08.000000000 +0200 +--- a/arch/x86/boot/compressed/misc.c ++++ b/arch/x86/boot/compressed/misc.c @@ -116,71 +116,13 @@ /* * gzip declarations @@ -336,7 +332,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch static void error(char *m); /* -@@ -189,11 +131,6 @@ +@@ -189,11 +131,6 @@ static void error(char *m); static struct boot_params *real_mode; /* Pointer to real-mode data */ static int quiet; @@ -348,7 +344,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch static void *memset(void *s, int c, unsigned n); static void *memcpy(void *dest, const void *src, unsigned n); -@@ -213,7 +150,19 @@ +@@ -213,7 +150,19 @@ static char *vidmem; static int vidport; static int lines, cols; @@ -368,7 +364,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch static void scroll(void) { -@@ -293,38 +242,6 @@ +@@ -293,38 +242,6 @@ static void *memcpy(void *dest, const vo return dest; } @@ -407,7 +403,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch static void error(char *x) { -@@ -407,12 +324,8 @@ +@@ -407,12 +324,8 @@ asmlinkage void decompress_kernel(void * lines = real_mode->screen_info.orig_video_lines; cols = real_mode->screen_info.orig_video_cols; @@ -420,7 +416,7 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch #ifdef CONFIG_X86_64 if ((unsigned long)output & (__KERNEL_ALIGN - 1)) -@@ -430,10 +343,9 @@ +@@ -430,10 +343,9 @@ asmlinkage void decompress_kernel(void * #endif #endif @@ -432,9 +428,8 @@ diff -urN linux-2.6.28.9/arch/x86/boot/compressed/misc.c linux-2.6.28.9.new/arch parse_elf(output); if (!quiet) putstr("done.\nBooting the kernel.\n"); -diff -urN linux-2.6.28.9/arch/x86/include/asm/boot.h linux-2.6.28.9.new/arch/x86/include/asm/boot.h ---- linux-2.6.28.9/arch/x86/include/asm/boot.h 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/arch/x86/include/asm/boot.h 2009-04-24 14:08:08.000000000 +0200 +--- a/arch/x86/include/asm/boot.h ++++ b/arch/x86/include/asm/boot.h @@ -15,11 +15,21 @@ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) @@ -458,10 +453,9 @@ diff -urN linux-2.6.28.9/arch/x86/include/asm/boot.h linux-2.6.28.9.new/arch/x86 #define BOOT_STACK_SIZE 0x1000 #endif -diff -urN linux-2.6.28.9/drivers/block/Kconfig linux-2.6.28.9.new/drivers/block/Kconfig ---- linux-2.6.28.9/drivers/block/Kconfig 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/drivers/block/Kconfig 2009-04-24 14:08:08.000000000 +0200 -@@ -358,6 +358,30 @@ +--- a/drivers/block/Kconfig ++++ b/drivers/block/Kconfig +@@ -358,6 +358,30 @@ config BLK_DEV_XIP will prevent RAM block device backing store memory from being allocated from highmem (only a problem for highmem systems). @@ -492,9 +486,8 @@ diff -urN linux-2.6.28.9/drivers/block/Kconfig linux-2.6.28.9.new/drivers/block/ config CDROM_PKTCDVD tristate "Packet writing on CD/DVD media" depends on !UML -diff -urN linux-2.6.28.9/include/linux/decompress/bunzip2.h linux-2.6.28.9.new/include/linux/decompress/bunzip2.h ---- linux-2.6.28.9/include/linux/decompress/bunzip2.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/include/linux/decompress/bunzip2.h 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/include/linux/decompress/bunzip2.h @@ -0,0 +1,10 @@ +#ifndef DECOMPRESS_BUNZIP2_H +#define DECOMPRESS_BUNZIP2_H @@ -506,9 +499,8 @@ diff -urN linux-2.6.28.9/include/linux/decompress/bunzip2.h linux-2.6.28.9.new/i + int *pos, + void(*error)(char *x)); +#endif -diff -urN linux-2.6.28.9/include/linux/decompress/generic.h linux-2.6.28.9.new/include/linux/decompress/generic.h ---- linux-2.6.28.9/include/linux/decompress/generic.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/include/linux/decompress/generic.h 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/include/linux/decompress/generic.h @@ -0,0 +1,30 @@ +#ifndef DECOMPRESS_GENERIC_H +#define DECOMPRESS_GENERIC_H @@ -540,9 +532,8 @@ diff -urN linux-2.6.28.9/include/linux/decompress/generic.h linux-2.6.28.9.new/i + + +#endif -diff -urN linux-2.6.28.9/include/linux/decompress/inflate.h linux-2.6.28.9.new/include/linux/decompress/inflate.h ---- linux-2.6.28.9/include/linux/decompress/inflate.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/include/linux/decompress/inflate.h 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/include/linux/decompress/inflate.h @@ -0,0 +1,13 @@ +#ifndef INFLATE_H +#define INFLATE_H @@ -557,9 +548,8 @@ diff -urN linux-2.6.28.9/include/linux/decompress/inflate.h linux-2.6.28.9.new/i + int *pos, + void(*error_fn)(char *x)); +#endif -diff -urN linux-2.6.28.9/include/linux/decompress/mm.h linux-2.6.28.9.new/include/linux/decompress/mm.h ---- linux-2.6.28.9/include/linux/decompress/mm.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/include/linux/decompress/mm.h 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/include/linux/decompress/mm.h @@ -0,0 +1,89 @@ +/* + * linux/compr_mm.h @@ -650,9 +640,8 @@ diff -urN linux-2.6.28.9/include/linux/decompress/mm.h linux-2.6.28.9.new/includ +#endif /* STATIC */ + +#endif /* DECOMPR_MM_H */ -diff -urN linux-2.6.28.9/include/linux/decompress/unlzma.h linux-2.6.28.9.new/include/linux/decompress/unlzma.h ---- linux-2.6.28.9/include/linux/decompress/unlzma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/include/linux/decompress/unlzma.h 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/include/linux/decompress/unlzma.h @@ -0,0 +1,12 @@ +#ifndef DECOMPRESS_UNLZMA_H +#define DECOMPRESS_UNLZMA_H @@ -666,10 +655,9 @@ diff -urN linux-2.6.28.9/include/linux/decompress/unlzma.h linux-2.6.28.9.new/in + ); + +#endif -diff -urN linux-2.6.28.9/init/Kconfig linux-2.6.28.9.new/init/Kconfig ---- linux-2.6.28.9/init/Kconfig 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/init/Kconfig 2009-04-24 14:08:08.000000000 +0200 -@@ -101,6 +101,56 @@ +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -101,6 +101,56 @@ config LOCALVERSION_AUTO which is done within the script "scripts/setlocalversion".) @@ -726,9 +714,8 @@ diff -urN linux-2.6.28.9/init/Kconfig linux-2.6.28.9.new/init/Kconfig config SWAP bool "Support for paging of anonymous memory (swap)" depends on MMU && BLOCK -diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_rd.c ---- linux-2.6.28.9/init/do_mounts_rd.c 2009-04-24 13:59:44.000000000 +0200 -+++ linux-2.6.28.9.new/init/do_mounts_rd.c 2009-04-24 14:08:08.000000000 +0200 +--- a/init/do_mounts_rd.c ++++ b/init/do_mounts_rd.c @@ -11,6 +11,12 @@ #include "do_mounts.h" @@ -742,7 +729,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ static int __init prompt_ramdisk(char *str) -@@ -29,7 +35,7 @@ +@@ -29,7 +35,7 @@ static int __init ramdisk_start_setup(ch } __setup("ramdisk_start=", ramdisk_start_setup); @@ -751,7 +738,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r /* * This routine tries to find a RAM disk image to load, and returns the -@@ -46,7 +52,7 @@ +@@ -46,7 +52,7 @@ static int __init crd_load(int in_fd, in * gzip */ static int __init @@ -760,7 +747,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r { const int size = 512; struct minix_super_block *minixsb; -@@ -74,6 +80,7 @@ +@@ -74,6 +80,7 @@ identify_ramdisk_image(int fd, int start sys_lseek(fd, start_block * BLOCK_SIZE, 0); sys_read(fd, buf, size); @@ -768,7 +755,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r /* * If it matches the gzip magic numbers, return 0 */ -@@ -81,9 +88,39 @@ +@@ -81,9 +88,39 @@ identify_ramdisk_image(int fd, int start printk(KERN_NOTICE "RAMDISK: Compressed image found at block %d\n", start_block); @@ -808,7 +795,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r /* romfs is at block zero too */ if (romfsb->word0 == ROMSB_WORD0 && -@@ -156,6 +193,7 @@ +@@ -156,6 +193,7 @@ int __init rd_load_image(char *from) int nblocks, i, disk; char *buf = NULL; unsigned short rotate = 0; @@ -816,7 +803,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) char rotator[4] = { '|' , '/' , '-' , '\\' }; #endif -@@ -168,12 +206,12 @@ +@@ -168,12 +206,12 @@ int __init rd_load_image(char *from) if (in_fd < 0) goto noclose_input; @@ -831,7 +818,7 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r goto successful_load; goto done; } -@@ -272,138 +310,48 @@ +@@ -272,138 +310,48 @@ int __init rd_load_disk(int n) return rd_load_image("/dev/root"); } @@ -993,10 +980,9 @@ diff -urN linux-2.6.28.9/init/do_mounts_rd.c linux-2.6.28.9.new/init/do_mounts_r - kfree(window); return result; } -diff -urN linux-2.6.28.9/init/initramfs.c linux-2.6.28.9.new/init/initramfs.c ---- linux-2.6.28.9/init/initramfs.c 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/init/initramfs.c 2009-04-24 14:13:53.000000000 +0200 -@@ -389,11 +389,14 @@ +--- a/init/initramfs.c ++++ b/init/initramfs.c +@@ -389,11 +389,14 @@ static int __init write_buffer(char *buf return len - count; } @@ -1013,7 +999,7 @@ diff -urN linux-2.6.28.9/init/initramfs.c linux-2.6.28.9.new/init/initramfs.c while ((written = write_buffer(buf, len)) < len && !message) { char c = buf[written]; if (c == '0') { -@@ -407,73 +410,14 @@ +@@ -407,73 +410,14 @@ static void __init flush_buffer(char *bu } else error("junk in compressed archive"); } @@ -1092,7 +1078,7 @@ diff -urN linux-2.6.28.9/init/initramfs.c linux-2.6.28.9.new/init/initramfs.c static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) { -@@ -482,9 +426,10 @@ +@@ -482,9 +426,10 @@ static char * __init unpack_to_rootfs(ch header_buf = kmalloc(110, GFP_KERNEL); symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL); name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL); @@ -1105,7 +1091,7 @@ diff -urN linux-2.6.28.9/init/initramfs.c linux-2.6.28.9.new/init/initramfs.c state = Start; this_header = 0; message = NULL; -@@ -504,22 +449,38 @@ +@@ -504,22 +449,38 @@ static char * __init unpack_to_rootfs(ch continue; } this_header = 0; @@ -1157,10 +1143,9 @@ diff -urN linux-2.6.28.9/init/initramfs.c linux-2.6.28.9.new/init/initramfs.c kfree(name_buf); kfree(symlink_buf); kfree(header_buf); -diff -urN linux-2.6.28.9/lib/Makefile linux-2.6.28.9.new/lib/Makefile ---- linux-2.6.28.9/lib/Makefile 2009-04-24 13:59:44.000000000 +0200 -+++ linux-2.6.28.9.new/lib/Makefile 2009-04-24 14:08:08.000000000 +0200 -@@ -11,7 +11,8 @@ +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmd rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ @@ -1170,9 +1155,8 @@ diff -urN linux-2.6.28.9/lib/Makefile linux-2.6.28.9.new/lib/Makefile lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -diff -urN linux-2.6.28.9/lib/decompress_bunzip2.c linux-2.6.28.9.new/lib/decompress_bunzip2.c ---- linux-2.6.28.9/lib/decompress_bunzip2.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/lib/decompress_bunzip2.c 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/lib/decompress_bunzip2.c @@ -0,0 +1,735 @@ +/* vi: set sw = 4 ts = 4: */ +/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net). @@ -1909,9 +1893,8 @@ diff -urN linux-2.6.28.9/lib/decompress_bunzip2.c linux-2.6.28.9.new/lib/decompr +} + +#define decompress bunzip2 -diff -urN linux-2.6.28.9/lib/decompress_unlzma.c linux-2.6.28.9.new/lib/decompress_unlzma.c ---- linux-2.6.28.9/lib/decompress_unlzma.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/lib/decompress_unlzma.c 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/lib/decompress_unlzma.c @@ -0,0 +1,647 @@ +/* Lzma decompressor for Linux kernel. Shamelessly snarfed + *from busybox 1.1.1 @@ -2560,10 +2543,9 @@ diff -urN linux-2.6.28.9/lib/decompress_unlzma.c linux-2.6.28.9.new/lib/decompre +} + +#define decompress unlzma -diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c ---- linux-2.6.28.9/lib/inflate.c 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/lib/inflate.c 2009-04-24 14:08:08.000000000 +0200 -@@ -109,20 +109,78 @@ +--- a/lib/inflate.c ++++ b/lib/inflate.c +@@ -109,20 +109,78 @@ static char rcsid[] = "#Id: inflate.c,v #endif #ifndef STATIC @@ -2651,7 +2633,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c #define slide window /* Huffman code lookup table entry--this entry is four bytes for machines -@@ -133,10 +191,10 @@ +@@ -133,10 +191,10 @@ static char rcsid[] = "#Id: inflate.c,v an unused code. If a code with e == 99 is looked up, this implies an error in the data. */ struct huft { @@ -2665,7 +2647,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c struct huft *t; /* pointer to next level of table */ } v; }; -@@ -144,7 +202,7 @@ +@@ -144,7 +202,7 @@ struct huft { /* Function prototypes */ STATIC int INIT huft_build OF((unsigned *, unsigned, unsigned, @@ -2674,7 +2656,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c STATIC int INIT huft_free OF((struct huft *)); STATIC int INIT inflate_codes OF((struct huft *, struct huft *, int, int)); STATIC int INIT inflate_stored OF((void)); -@@ -159,28 +217,28 @@ +@@ -159,28 +217,28 @@ STATIC int INIT inflate OF((void)); circular buffer. The index is updated simply by incrementing and then ANDing with 0x7fff (32K-1). */ /* It is left to other modules to supply the 32 K area. It is assumed @@ -2710,7 +2692,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13}; -@@ -217,59 +275,21 @@ +@@ -217,59 +275,21 @@ static const ush cpdext[] = { /* the stream. */ @@ -2776,7 +2758,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c /* Huffman code decoding is performed using a multi-level table lookup. The fastest way to decode is to simply build a lookup table whose -@@ -307,7 +327,7 @@ +@@ -307,7 +327,7 @@ STATIC const int lbits = 9; /* STATIC const int dbits = 6; /* bits in base distance lookup table */ @@ -2785,7 +2767,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c #define BMAX 16 /* maximum bit length of any code (16 for explode) */ #define N_MAX 288 /* maximum number of codes in any set */ -@@ -319,8 +339,8 @@ +@@ -319,8 +339,8 @@ STATIC int INIT huft_build( unsigned *b, /* code lengths in bits (all assumed <= BMAX) */ unsigned n, /* number of codes (assumed <= N_MAX) */ unsigned s, /* number of simple-valued codes (0..s-1) */ @@ -2796,7 +2778,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c struct huft **t, /* result: starting table */ int *m /* maximum lookup bits, returns actual */ ) -@@ -500,8 +520,8 @@ +@@ -500,8 +520,8 @@ DEBG1("5 "); if (h) { x[h] = i; /* save pattern for backing up */ @@ -2807,7 +2789,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c r.v.t = q; /* pointer to this table */ j = i >> (w - l); /* (get around Turbo C bug) */ u[h-1][j] = r; /* connect to last table */ -@@ -511,18 +531,18 @@ +@@ -511,18 +531,18 @@ DEBG1("6 "); DEBG("h6c "); /* set up table entry in r */ @@ -2830,7 +2812,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c r.v.n = d[*p++ - s]; } DEBG("h6d "); -@@ -592,11 +612,12 @@ +@@ -592,11 +612,12 @@ STATIC int INIT inflate_codes( Return an error code or zero if it all goes ok. */ { register unsigned e; /* table entry flag/number of extra bits */ @@ -2845,7 +2827,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c register unsigned k; /* number of bits in bit buffer */ -@@ -622,7 +643,7 @@ +@@ -622,7 +643,7 @@ STATIC int INIT inflate_codes( DUMPBITS(t->b) if (e == 16) /* then it's a literal */ { @@ -2854,7 +2836,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c Tracevv((stderr, "%c", slide[w-1])); if (w == WSIZE) { -@@ -659,11 +680,25 @@ +@@ -659,11 +680,25 @@ STATIC int INIT inflate_codes( /* do the copy */ do { @@ -2882,7 +2864,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c w += e; d += e; } -@@ -673,9 +708,8 @@ +@@ -673,9 +708,8 @@ STATIC int INIT inflate_codes( slide[w++] = slide[d++]; Tracevv((stderr, "%c", slide[w-1])); } while (--e); @@ -2894,7 +2876,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c w = 0; } } while (n); -@@ -702,7 +736,7 @@ +@@ -702,7 +736,7 @@ STATIC int INIT inflate_stored(void) { unsigned n; /* number of bytes in block */ unsigned w; /* current window position */ @@ -2903,7 +2885,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c register unsigned k; /* number of bits in bit buffer */ DEBG("<stor"); -@@ -732,7 +766,7 @@ +@@ -732,7 +766,7 @@ DEBG("<stor"); while (n--) { NEEDBITS(8) @@ -2912,7 +2894,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c if (w == WSIZE) { flush_output(w); -@@ -838,7 +872,7 @@ +@@ -838,7 +872,7 @@ STATIC int noinline INIT inflate_dynamic unsigned nl; /* number of literal/length codes */ unsigned nd; /* number of distance codes */ unsigned *ll; /* literal/length and distance code lengths */ @@ -2921,7 +2903,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c register unsigned k; /* number of bits in bit buffer */ int ret; -@@ -1033,7 +1067,7 @@ +@@ -1033,7 +1067,7 @@ STATIC int INIT inflate_block( /* decompress an inflated block */ { unsigned t; /* block type */ @@ -2930,7 +2912,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c register unsigned k; /* number of bits in bit buffer */ DEBG("<blk"); -@@ -1130,8 +1164,8 @@ +@@ -1130,8 +1164,8 @@ STATIC int INIT inflate(void) * **********************************************************************/ @@ -2941,7 +2923,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c #define CRC_VALUE (crc ^ 0xffffffffUL) /* -@@ -1172,7 +1206,7 @@ +@@ -1172,7 +1206,7 @@ makecrc(void) } /* this is initialized here so this code could reside in ROM */ @@ -2950,7 +2932,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c } /* gzip flag byte */ -@@ -1184,18 +1218,89 @@ +@@ -1184,18 +1218,89 @@ makecrc(void) #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ #define RESERVED 0xC0 /* bit 6,7: reserved */ @@ -3044,7 +3026,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c magic[0] = NEXTBYTE(); magic[1] = NEXTBYTE(); method = NEXTBYTE(); -@@ -1212,7 +1317,7 @@ +@@ -1212,7 +1317,7 @@ static int INIT gunzip(void) return -1; } @@ -3053,7 +3035,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c if ((flags & ENCRYPTED) != 0) { error("Input is encrypted"); return -1; -@@ -1277,15 +1382,15 @@ +@@ -1277,15 +1382,15 @@ static int INIT gunzip(void) /* crc32 (see algorithm.doc) * uncompressed input size modulo 2^32 */ @@ -3077,7 +3059,7 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c /* Validate decompression */ if (orig_crc != CRC_VALUE) { -@@ -1296,11 +1401,22 @@ +@@ -1296,11 +1401,22 @@ static int INIT gunzip(void) error("length error"); return -1; } @@ -3101,10 +3083,9 @@ diff -urN linux-2.6.28.9/lib/inflate.c linux-2.6.28.9.new/lib/inflate.c - +#define decompress gunzip -diff -urN linux-2.6.28.9/scripts/Makefile.lib linux-2.6.28.9.new/scripts/Makefile.lib ---- linux-2.6.28.9/scripts/Makefile.lib 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/scripts/Makefile.lib 2009-04-24 14:08:08.000000000 +0200 -@@ -183,3 +183,17 @@ +--- a/scripts/Makefile.lib ++++ b/scripts/Makefile.lib +@@ -183,3 +183,17 @@ quiet_cmd_gzip = GZIP $@ cmd_gzip = gzip -f -9 < $< > $@ @@ -3122,9 +3103,8 @@ diff -urN linux-2.6.28.9/scripts/Makefile.lib linux-2.6.28.9.new/scripts/Makefil + +quiet_cmd_lzma = LZMA $@ +cmd_lzma = (/usr/bin/lzma -9 -c $< ; $(size_append) $<) >$@ || (rm -f $@ ; false) -diff -urN linux-2.6.28.9/scripts/bin_size linux-2.6.28.9.new/scripts/bin_size ---- linux-2.6.28.9/scripts/bin_size 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.28.9.new/scripts/bin_size 2009-04-24 14:08:08.000000000 +0200 +--- /dev/null ++++ b/scripts/bin_size @@ -0,0 +1,10 @@ +#!/bin/sh + diff --git a/target/linux/rdc/patches-2.6.28/007-r6040_git_updates.patch b/target/linux/rdc/patches-2.6.28/007-r6040_git_updates.patch index 777add380..6447be43b 100644 --- a/target/linux/rdc/patches-2.6.28/007-r6040_git_updates.patch +++ b/target/linux/rdc/patches-2.6.28/007-r6040_git_updates.patch @@ -1,5 +1,5 @@ ---- linux-2.6.28.9/drivers/net/r6040.c 2009-03-23 22:55:52.000000000 +0100 -+++ linux-2.6.28.9.new/drivers/net/r6040.c 2009-04-24 14:24:51.000000000 +0200 +--- a/drivers/net/r6040.c ++++ b/drivers/net/r6040.c @@ -49,12 +49,12 @@ #include <asm/processor.h> @@ -16,7 +16,7 @@ #define PHY_MODE 0x3100 /* PHY CHIP Register 0 */ #define PHY_CAP 0x01E1 /* PHY CHIP Register 4 */ -@@ -160,6 +160,7 @@ +@@ -160,6 +160,7 @@ MODULE_AUTHOR("Sten Wang <sten.wang@rdc. "Florian Fainelli <florian@openwrt.org>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver"); @@ -24,7 +24,7 @@ /* RX and TX interrupts that we handle */ #define RX_INTS (RX_FIFO_FULL | RX_NO_DESC | RX_FINISH) -@@ -200,7 +201,7 @@ +@@ -200,7 +201,7 @@ struct r6040_private { static char version[] __devinitdata = KERN_INFO DRV_NAME ": RDC R6040 NAPI net driver," @@ -33,7 +33,7 @@ static int phy_table[] = { PHY1_ADDR, PHY2_ADDR }; -@@ -330,7 +331,7 @@ +@@ -330,7 +331,7 @@ static int r6040_alloc_rxbufs(struct net do { skb = netdev_alloc_skb(dev, MAX_BUF_SIZE); if (!skb) { @@ -42,7 +42,7 @@ rc = -ENOMEM; goto err_exit; } -@@ -438,7 +439,6 @@ +@@ -438,7 +439,6 @@ static void r6040_down(struct net_device { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; @@ -50,7 +50,7 @@ int limit = 2048; u16 *adrp; u16 cmd; -@@ -457,22 +457,12 @@ +@@ -457,22 +457,12 @@ static void r6040_down(struct net_device iowrite16(adrp[0], ioaddr + MID_0L); iowrite16(adrp[1], ioaddr + MID_0M); iowrite16(adrp[2], ioaddr + MID_0H); @@ -74,7 +74,7 @@ /* deleted timer */ del_timer_sync(&lp->timer); -@@ -481,8 +471,28 @@ +@@ -481,8 +471,28 @@ static int r6040_close(struct net_device napi_disable(&lp->napi); netif_stop_queue(dev); r6040_down(dev); @@ -103,7 +103,7 @@ return 0; } -@@ -598,7 +608,6 @@ +@@ -598,7 +608,6 @@ static int r6040_rx(struct net_device *d /* Send to upper layer */ netif_receive_skb(skb_ptr); @@ -111,7 +111,7 @@ dev->stats.rx_packets++; dev->stats.rx_bytes += descptr->len - 4; -@@ -668,7 +677,7 @@ +@@ -668,7 +677,7 @@ static int r6040_poll(struct napi_struct work_done = r6040_rx(dev, budget); if (work_done < budget) { @@ -120,7 +120,7 @@ /* Enable RX interrupt */ iowrite16(ioread16(ioaddr + MIER) | RX_INTS, ioaddr + MIER); } -@@ -705,7 +714,7 @@ +@@ -705,7 +714,7 @@ static irqreturn_t r6040_interrupt(int i /* Mask off RX interrupt */ misr &= ~RX_INTS; @@ -129,7 +129,7 @@ } /* TX interrupt request */ -@@ -1063,20 +1088,20 @@ +@@ -1063,20 +1072,20 @@ static int __devinit r6040_init_one(stru /* this should always be supported */ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { @@ -153,7 +153,7 @@ err = -EIO; goto err_out; } -@@ -1086,7 +1111,7 @@ +@@ -1086,7 +1095,7 @@ static int __devinit r6040_init_one(stru dev = alloc_etherdev(sizeof(struct r6040_private)); if (!dev) { @@ -162,7 +162,7 @@ err = -ENOMEM; goto err_out; } -@@ -1102,11 +1127,15 @@ +@@ -1102,11 +1111,15 @@ static int __devinit r6040_init_one(stru ioaddr = pci_iomap(pdev, bar, io_size); if (!ioaddr) { @@ -179,7 +179,7 @@ /* Init system & device */ lp->base = ioaddr; -@@ -1123,6 +1152,13 @@ +@@ -1123,6 +1136,13 @@ static int __devinit r6040_init_one(stru adrp[1] = ioread16(ioaddr + MID_0M); adrp[2] = ioread16(ioaddr + MID_0H); diff --git a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch index d32860234..1092bc826 100644 --- a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch +++ b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch @@ -7,7 +7,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c -@@ -69,12 +69,12 @@ +@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, /* * Make sure we clear all existing interrupts */ @@ -23,7 +23,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } for (i = 0; i < 16; i++) { -@@ -82,7 +82,7 @@ +@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, writel(VIC_VECT_CNTL_ENABLE | i, reg); } @@ -6657,7 +6657,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +CONFIG_HAS_DMA=y --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -498,6 +498,13 @@ +@@ -498,6 +498,13 @@ config ARCH_S3C2410 BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). @@ -6671,7 +6671,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config ARCH_SHARK bool "Shark" select ISA -@@ -590,6 +597,7 @@ +@@ -590,6 +597,7 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" @@ -6679,7 +6679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 -@@ -601,6 +609,11 @@ +@@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2442/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif @@ -6691,7 +6691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-imx/Kconfig" -@@ -1256,6 +1269,8 @@ +@@ -1256,6 +1269,8 @@ source "drivers/usb/Kconfig" source "drivers/uwb/Kconfig" @@ -6700,7 +6700,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" -@@ -1268,6 +1283,8 @@ +@@ -1268,6 +1283,8 @@ source "drivers/rtc/Kconfig" source "drivers/dma/Kconfig" @@ -6711,7 +6711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "drivers/auxdisplay/Kconfig" --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S -@@ -106,6 +106,8 @@ +@@ -106,6 +106,8 @@ SECTIONS *(.got) /* Global offset table */ } @@ -7757,7 +7757,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + resume_dependency, int uart_index); --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h -@@ -21,7 +21,15 @@ +@@ -21,7 +21,15 @@ struct s3c2410_spigpio_info { int num_chipselect; int bus_num; @@ -7776,7 +7776,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h -@@ -22,5 +22,12 @@ +@@ -22,5 +22,12 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; @@ -7917,7 +7917,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 -#endif /* __ASM_ARCH_VMALLOC_H */ --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig -@@ -9,6 +9,7 @@ +@@ -9,6 +9,7 @@ config CPU_S3C2410 depends on ARCH_S3C2410 select S3C2410_CLOCK select S3C2410_GPIO @@ -7925,7 +7925,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM help -@@ -32,11 +33,6 @@ +@@ -32,11 +33,6 @@ config S3C2410_GPIO help GPIO code for S3C2410 and similar processors @@ -7937,7 +7937,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SIMTEC_NOR bool help -@@ -49,6 +45,12 @@ +@@ -49,6 +45,12 @@ config MACH_BAST_IDE Internal node for machines with an BAST style IDE interface @@ -7950,7 +7950,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 menu "S3C2410 Machines" config ARCH_SMDK2410 -@@ -84,6 +86,7 @@ +@@ -84,6 +86,7 @@ config ARCH_BAST select PM_SIMTEC if PM select SIMTEC_NOR select MACH_BAST_IDE @@ -7958,7 +7958,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select ISA help Say Y here if you are using the Simtec Electronics EB2410ITX -@@ -121,6 +124,7 @@ +@@ -121,6 +124,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select PM_SIMTEC if PM @@ -7966,7 +7966,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select SIMTEC_NOR select MACH_BAST_IDE select CPU_S3C2410 -@@ -130,7 +134,16 @@ +@@ -130,7 +134,16 @@ config MACH_VR1000 config MACH_QT2410 bool "QT2410" select CPU_S3C2410 @@ -7993,7 +7993,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/devs.h> #include <plat/cpu.h> -@@ -150,7 +151,7 @@ +@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_ #endif &s3c_device_adc, &s3c_device_wdt, @@ -8002,7 +8002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, -@@ -233,6 +234,7 @@ +@@ -233,6 +234,7 @@ static void __init amlm5900_init(void) #ifdef CONFIG_FB_S3C2410 s3c24xx_fb_set_platdata(&amlm5900_fb_info); #endif @@ -8023,7 +8023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <mach/fb.h> #include <linux/mtd/mtd.h> -@@ -406,7 +406,7 @@ +@@ -406,7 +406,7 @@ static struct platform_device bast_sio = * standard 100KHz i2c bus frequency */ @@ -8032,7 +8032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = 0, .slave_addr = 0x10, .bus_freq = 100*1000, -@@ -553,7 +553,7 @@ +@@ -553,7 +553,7 @@ static struct platform_device *bast_devi &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8041,7 +8041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &bast_device_dm9k, -@@ -588,7 +588,8 @@ +@@ -588,7 +588,8 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); s3c_device_nand.dev.platform_data = &bast_nand_info; @@ -8857,7 +8857,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/pm.h> static struct map_desc h1940_iodesc[] __initdata = { -@@ -129,6 +131,11 @@ +@@ -129,6 +131,11 @@ static struct s3c2410_udc_mach_info h194 .vbus_pin_inverted = 1, }; @@ -8869,7 +8869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * Set lcd on or off -@@ -183,9 +190,10 @@ +@@ -183,9 +190,10 @@ static struct platform_device *h1940_dev &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8881,7 +8881,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_leds, &s3c_device_bluetooth, }; -@@ -201,7 +209,7 @@ +@@ -201,7 +209,7 @@ static void __init h1940_map_io(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif @@ -8890,7 +8890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void __init h1940_init_irq(void) -@@ -214,7 +222,9 @@ +@@ -214,7 +222,9 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); @@ -8900,7 +8900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ -@@ -223,10 +233,9 @@ +@@ -223,10 +233,9 @@ static void __init h1940_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); @@ -8933,7 +8933,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ -@@ -320,7 +320,7 @@ +@@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -8942,7 +8942,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usb, &s3c_device_usbgadget, -@@ -332,7 +332,7 @@ +@@ -332,7 +332,7 @@ static struct platform_device *n30_devic static struct platform_device *n35_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -8951,7 +8951,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usbgadget, &n35_button_device, -@@ -501,7 +501,7 @@ +@@ -501,7 +501,7 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); @@ -8970,7 +8970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/cpu.h> static struct map_desc otom11_iodesc[] __initdata = { -@@ -94,7 +95,7 @@ +@@ -94,7 +95,7 @@ static struct platform_device *otom11_de &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8979,7 +8979,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &otom_device_nor, -@@ -109,6 +110,7 @@ +@@ -109,6 +110,7 @@ static void __init otom11_map_io(void) static void __init otom11_init(void) { @@ -9011,7 +9011,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/common-smdk.h> #include <plat/devs.h> -@@ -213,7 +214,7 @@ +@@ -213,7 +214,7 @@ static struct platform_device qt2410_led /* SPI */ @@ -9020,7 +9020,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { switch (cs) { case BITBANG_CS_ACTIVE: -@@ -247,7 +248,7 @@ +@@ -247,7 +248,7 @@ static struct platform_device *qt2410_de &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9029,7 +9029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_sdi, &s3c_device_usbgadget, -@@ -320,6 +321,24 @@ +@@ -320,6 +321,24 @@ static int __init qt2410_tft_setup(char __setup("tft=", qt2410_tft_setup); @@ -9054,7 +9054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); -@@ -349,11 +368,12 @@ +@@ -349,11 +368,12 @@ static void __init qt2410_machine_init(v s3c2410_gpio_setpin(S3C2410_GPB0, 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); @@ -9078,7 +9078,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/devs.h> #include <plat/cpu.h> -@@ -89,7 +90,7 @@ +@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9087,7 +9087,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, }; -@@ -102,6 +103,7 @@ +@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void) static void __init smdk2410_init(void) { @@ -9105,7 +9105,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/devs.h> #include <plat/cpu.h> -@@ -127,7 +128,7 @@ +@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, @@ -9114,7 +9114,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, -@@ -146,6 +147,7 @@ +@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(voi static void __init tct_hammer_init(void) { @@ -9132,7 +9132,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "usb-simtec.h" #include "nor-simtec.h" -@@ -334,7 +335,7 @@ +@@ -334,7 +335,7 @@ static struct platform_device *vr1000_de &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9141,7 +9141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_adc, &serial_device, &vr1000_dm9k0, -@@ -384,6 +385,7 @@ +@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void) static void __init vr1000_init(void) { @@ -9151,7 +9151,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 i2c_register_board_info(0, vr1000_i2c_devs, --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile -@@ -15,7 +15,8 @@ +@@ -15,7 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_GPIO) += gpio.o @@ -9161,7 +9161,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Machine support -@@ -38,3 +39,5 @@ +@@ -38,3 +39,5 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o # machine additions obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o @@ -9512,7 +9512,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Initial IO mappings */ -@@ -59,25 +63,28 @@ +@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3 * machine specific initialisation. */ @@ -9547,7 +9547,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp = __raw_readl(S3C2410_CLKDIVN); -@@ -95,7 +102,13 @@ +@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal * console to use them */ @@ -9564,7 +9564,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c -@@ -93,12 +93,6 @@ +@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct cl /* clock selections */ @@ -9577,7 +9577,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_erefclk = { .name = "erefclk", .id = -1, -@@ -773,5 +767,6 @@ +@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void) s3c2412_clkcon_enable(clkp, 0); } @@ -9625,7 +9625,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc jive_iodesc[] __initdata = { }; -@@ -450,14 +451,14 @@ +@@ -450,14 +451,14 @@ static struct spi_board_info __initdata /* I2C bus and device configuration. */ @@ -9642,7 +9642,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = { I2C_BOARD_INFO("lis302dl", 0x1c), .irq = IRQ_EINT14, -@@ -470,7 +471,7 @@ +@@ -470,7 +471,7 @@ static struct platform_device *jive_devi &s3c_device_usb, &s3c_device_rtc, &s3c_device_wdt, @@ -9651,7 +9651,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_lcd, &jive_device_lcdspi, &jive_device_wm8750, -@@ -492,7 +493,7 @@ +@@ -492,7 +493,7 @@ static int jive_pm_suspend(struct sys_de * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); @@ -9660,7 +9660,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; } -@@ -628,7 +629,7 @@ +@@ -628,7 +629,7 @@ static void __init jive_machine_init(voi /* initialise the power management now we've setup everything. */ @@ -9669,7 +9669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c_device_nand.dev.platform_data = &jive_nand_info; -@@ -663,7 +664,7 @@ +@@ -663,7 +664,7 @@ static void __init jive_machine_init(voi spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); @@ -9690,7 +9690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <mach/fb.h> #include <plat/s3c2410.h> -@@ -105,7 +106,7 @@ +@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_ &s3c_device_usb, //&s3c_device_lcd, &s3c_device_wdt, @@ -9699,7 +9699,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usbgadget, }; -@@ -142,6 +143,7 @@ +@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); @@ -9719,7 +9719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/s3c2410.h> #include <plat/s3c2412.h> -@@ -122,7 +123,7 @@ +@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstm static struct platform_device *vstms_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, @@ -9728,7 +9728,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, -@@ -151,6 +152,7 @@ +@@ -151,6 +152,7 @@ static void __init vstms_map_io(void) static void __init vstms_init(void) { @@ -9738,7 +9738,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c -@@ -85,7 +85,7 @@ +@@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) { @@ -9747,7 +9747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; } -@@ -98,7 +98,7 @@ +@@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; __raw_writel(tmp, S3C2412_PWRCFG); @@ -9791,7 +9791,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; -@@ -136,7 +140,7 @@ +@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void) * machine specific initialisation. */ @@ -9800,7 +9800,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { /* move base of IO */ -@@ -153,20 +157,25 @@ +@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_de /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); @@ -9829,7 +9829,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_mpll.rate = fclk; -@@ -183,11 +192,17 @@ +@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); @@ -9848,7 +9848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2412_baseclk_add(); } -@@ -216,5 +231,8 @@ +@@ -216,5 +231,8 @@ int __init s3c2412_init(void) { printk("S3C2412: Initialising architecture\n"); @@ -16112,7 +16112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* _LINUX_FIQ_C_ISR_H */ --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig -@@ -22,12 +22,20 @@ +@@ -22,12 +22,20 @@ config S3C2440_DMA help Support for S3C2440 specific DMA code5A @@ -16133,7 +16133,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select PM_SIMTEC if PM select HAVE_PATA_PLATFORM help -@@ -37,6 +45,7 @@ +@@ -37,6 +45,7 @@ config MACH_ANUBIS config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 @@ -16141,7 +16141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select PM_SIMTEC if PM help Say Y here if you are using the Simtec IM2440D20 module, also -@@ -74,5 +83,30 @@ +@@ -74,5 +83,30 @@ config MACH_AT2440EVB help Say Y here if you are using the AT2440EVB development board @@ -16184,7 +16184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> -@@ -404,7 +405,7 @@ +@@ -404,7 +405,7 @@ static struct platform_device *anubis_de &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, @@ -16193,7 +16193,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &anubis_device_ide0, -@@ -468,6 +469,7 @@ +@@ -468,6 +469,7 @@ static void __init anubis_map_io(void) static void __init anubis_init(void) { @@ -16213,7 +16213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> -@@ -166,7 +167,7 @@ +@@ -166,7 +167,7 @@ static struct platform_device *at2440evb &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, @@ -16222,7 +16222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &at2440evb_device_eth, -@@ -183,6 +184,7 @@ +@@ -183,6 +184,7 @@ static void __init at2440evb_map_io(void static void __init at2440evb_init(void) { @@ -18021,7 +18021,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/s3c2410.h> #include <plat/s3c2440.h> -@@ -107,7 +108,7 @@ +@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18030,7 +18030,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &s3c_device_camif, -@@ -142,6 +143,7 @@ +@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void) static void __init nexcoder_init(void) { @@ -18050,7 +18050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> -@@ -335,7 +336,7 @@ +@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_ /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { @@ -18059,7 +18059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, -@@ -398,6 +399,8 @@ +@@ -398,6 +399,8 @@ static void __init osiris_init(void) sysdev_class_register(&osiris_pm_sysclass); sysdev_register(&osiris_pm_sysdev); @@ -18079,7 +18079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <mach/fb.h> #include <plat/clock.h> -@@ -179,7 +179,7 @@ +@@ -179,7 +179,7 @@ static struct platform_device *rx3715_de &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18088,7 +18088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_nand, }; -@@ -203,7 +203,7 @@ +@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(v #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif @@ -18107,7 +18107,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/s3c2410.h> #include <plat/s3c2440.h> -@@ -152,7 +153,7 @@ +@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18116,7 +18116,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, }; -@@ -166,6 +167,7 @@ +@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void) static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -18126,7 +18126,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 smdk_machine_init(); --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile -@@ -13,6 +13,7 @@ +@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o d obj-$(CONFIG_CPU_S3C2440) += irq.o obj-$(CONFIG_CPU_S3C2440) += clock.o obj-$(CONFIG_S3C2440_DMA) += dma.o @@ -18134,7 +18134,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Machine support -@@ -22,3 +23,6 @@ +@@ -22,3 +23,6 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715 obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o @@ -18143,7 +18143,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c -@@ -46,6 +46,9 @@ +@@ -46,6 +46,9 @@ int __init s3c2440_init(void) s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; @@ -18178,7 +18178,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, -@@ -30,5 +31,8 @@ +@@ -30,5 +31,8 @@ int __init s3c2442_init(void) { printk("S3C2442: Initialising architecture\n"); @@ -18198,7 +18198,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/cpu.h> -@@ -145,12 +147,6 @@ +@@ -145,12 +147,6 @@ static unsigned long s3c2443_roundrate_c /* clock selections */ @@ -18211,7 +18211,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, -@@ -165,14 +161,6 @@ +@@ -165,14 +161,6 @@ static struct clk clk_mpll = { }; #endif @@ -18226,7 +18226,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, -@@ -1011,22 +999,20 @@ +@@ -1011,22 +999,20 @@ static struct clk *clks[] __initdata = { &clk_prediv, }; @@ -18255,7 +18255,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 pll = s3c2443_get_mpll(mpllcon, xtal); clk_msysclk.rate = pll; -@@ -1036,13 +1022,29 @@ +@@ -1036,13 +1022,29 @@ void __init s3c2443_init_clocks(int xtal hclk /= s3c2443_get_hdiv(clkdiv0); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); @@ -18286,7 +18286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2443_clk_initparents(); for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { -@@ -1056,7 +1058,7 @@ +@@ -1056,7 +1058,7 @@ void __init s3c2443_init_clocks(int xtal } clk_epll.rate = s3c2443_get_epll(epllcon, xtal); @@ -18295,7 +18295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_usb_bus.parent = &clk_usb_bus_host; /* ensure usb bus clock is within correct rate of 48MHz */ -@@ -1105,4 +1107,6 @@ +@@ -1105,4 +1107,6 @@ void __init s3c2443_init_clocks(int xtal (clkp->enable)(clkp, 0); } @@ -18321,7 +18321,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = (x) | DMA_CH_VALID, \ --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig -@@ -24,6 +24,7 @@ +@@ -24,6 +24,7 @@ config MACH_SMDK2443 bool "SMDK2443" select CPU_S3C2443 select MACH_SMDK @@ -18339,7 +18339,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/s3c2410.h> #include <plat/s3c2440.h> -@@ -103,8 +104,8 @@ +@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_u static struct platform_device *smdk2443_devices[] __initdata = { &s3c_device_wdt, @@ -18350,7 +18350,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static void __init smdk2443_map_io(void) -@@ -116,6 +117,7 @@ +@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void) static void __init smdk2443_machine_init(void) { @@ -18360,7 +18360,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c -@@ -81,10 +81,9 @@ +@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3 * machine specific initialisation. */ @@ -21366,7 +21366,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +} --- a/arch/arm/Makefile +++ b/arch/arm/Makefile -@@ -121,7 +121,10 @@ +@@ -121,7 +121,10 @@ endif machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 @@ -21379,7 +21379,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 machine-$(CONFIG_ARCH_IMX) := imx --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig -@@ -183,14 +183,14 @@ +@@ -183,14 +183,14 @@ config CPU_ARM926T depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \ MACH_VERSATILE_AB || ARCH_OMAP730 || \ ARCH_OMAP16XX || MACH_REALVIEW_EB || \ @@ -21396,7 +21396,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ -@@ -400,9 +400,10 @@ +@@ -400,9 +400,10 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 bool "Support ARM V6 processor" @@ -24626,7 +24626,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc -@@ -224,7 +243,7 @@ +@@ -224,7 +243,7 @@ struct s3c2410_uartcfg { * or platform_add_device() before the console_initcall() */ @@ -24830,7 +24830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* __PLAT_S3C_SDHCI_H */ --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h -@@ -28,7 +28,7 @@ +@@ -28,7 +28,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ #include <plat/regs-serial.h> @@ -24839,7 +24839,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* working in physical space... */ #undef S3C2410_WDOGREG -@@ -37,7 +37,7 @@ +@@ -37,7 +37,7 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) @@ -24848,7 +24848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static __inline__ void uart_wr(unsigned int reg, unsigned int val) -@@ -139,6 +139,28 @@ +@@ -139,6 +139,28 @@ static void arch_decomp_error(const char static void error(char *err); @@ -24877,7 +24877,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void arch_decomp_setup(void) { -@@ -149,6 +171,12 @@ +@@ -149,6 +171,12 @@ arch_decomp_setup(void) arch_detect_cpu(); arch_decomp_wdog_start(); @@ -25067,7 +25067,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select NO_IOPORT help Base platform code for any Samsung S3C device -@@ -16,24 +16,24 @@ +@@ -16,24 +16,24 @@ config PLAT_S3C config CPU_LLSERIAL_S3C2410_ONLY bool @@ -25096,7 +25096,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help Selected if there is an S3C2440 (or register compatible) serial low-level implementation needed -@@ -57,6 +57,14 @@ +@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET Say y here to use the watchdog to reset the system if the kernel decompressor detects an error during decompression. @@ -25111,7 +25111,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 comment "Power management" config S3C2410_PM_DEBUG -@@ -67,6 +75,15 @@ +@@ -67,6 +75,15 @@ config S3C2410_PM_DEBUG Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> for more information. @@ -25127,7 +25127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config S3C2410_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" depends on PLAT_S3C && PM && CRC32 -@@ -102,3 +119,73 @@ +@@ -102,3 +119,73 @@ config S3C_LOWLEVEL_UART_PORT such as the `Uncompressing...` at start time. The value of this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. @@ -27737,7 +27737,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <plat/common-smdk.h> #include <plat/devs.h> -@@ -201,5 +201,5 @@ +@@ -201,5 +201,5 @@ void __init smdk_machine_init(void) platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); @@ -27763,7 +27763,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* table of supported CPUs */ static const char name_s3c2400[] = "S3C2400"; -@@ -72,6 +62,7 @@ +@@ -72,6 +62,7 @@ static const char name_s3c2410[] = "S3C static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; @@ -27771,7 +27771,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; -@@ -123,6 +114,15 @@ +@@ -123,6 +114,15 @@ static struct cpu_table cpu_ids[] __init .name = name_s3c2442 }, { @@ -27787,7 +27787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, -@@ -169,23 +169,7 @@ +@@ -169,23 +169,7 @@ static struct map_desc s3c_iodesc[] __in IODESC_ENT(UART) }; @@ -27812,7 +27812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static unsigned long s3c24xx_read_idcode_v5(void) { -@@ -231,6 +215,7 @@ +@@ -231,6 +215,7 @@ void __init s3c24xx_init_io(struct map_d unsigned long idcode = 0x0; /* initialise the io descriptors we need for initialisation */ @@ -27820,7 +27820,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { -@@ -239,117 +224,7 @@ +@@ -239,117 +224,7 @@ void __init s3c24xx_init_io(struct map_d idcode = s3c24xx_read_idcode_v4(); } @@ -27960,7 +27960,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Serial port registrations */ -@@ -76,6 +78,19 @@ +@@ -76,6 +78,19 @@ static struct resource s3c2410_uart2_res } }; @@ -27980,7 +27980,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { [0] = { .resources = s3c2410_uart0_resource, -@@ -89,6 +104,10 @@ +@@ -89,6 +104,10 @@ struct s3c24xx_uart_resources s3c2410_ua .resources = s3c2410_uart2_resource, .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), }, @@ -27991,7 +27991,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; /* yart devices */ -@@ -105,13 +124,18 @@ +@@ -105,13 +124,18 @@ static struct platform_device s3c24xx_ua .id = 2, }; @@ -28012,7 +28012,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; /* USB Host Controller */ -@@ -192,8 +216,8 @@ +@@ -192,8 +216,8 @@ void __init s3c24xx_fb_set_platdata(stru static struct resource s3c_nand_resource[] = { [0] = { @@ -28023,7 +28023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = IORESOURCE_MEM, } }; -@@ -207,6 +231,23 @@ +@@ -207,6 +231,23 @@ struct platform_device s3c_device_nand = EXPORT_SYMBOL(s3c_device_nand); @@ -28047,7 +28047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { -@@ -271,31 +312,6 @@ +@@ -271,31 +312,6 @@ struct platform_device s3c_device_wdt = EXPORT_SYMBOL(s3c_device_wdt); @@ -28079,7 +28079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* IIS */ static struct resource s3c_iis_resource[] = { -@@ -382,8 +398,8 @@ +@@ -382,8 +398,8 @@ struct platform_device s3c_device_adc = static struct resource s3c_sdi_resource[] = { [0] = { @@ -28090,7 +28090,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = IORESOURCE_MEM, }, [1] = { -@@ -403,36 +419,6 @@ +@@ -403,36 +419,6 @@ struct platform_device s3c_device_sdi = EXPORT_SYMBOL(s3c_device_sdi); @@ -28137,7 +28137,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) { -@@ -215,3 +216,423 @@ +@@ -215,3 +216,423 @@ int s3c2410_gpio_irq2pin(unsigned int ir } EXPORT_SYMBOL(s3c2410_gpio_irq2pin); @@ -28670,7 +28670,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) { return -EINVAL; -@@ -125,7 +34,7 @@ +@@ -125,7 +34,7 @@ static int s3c24xx_gpiolib_banka_input(s static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, unsigned offset, int value) { @@ -28679,7 +28679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 void __iomem *base = ourchip->base; unsigned long flags; unsigned long dat; -@@ -151,9 +60,10 @@ +@@ -151,9 +60,10 @@ static int s3c24xx_gpiolib_banka_output( return 0; } @@ -28691,7 +28691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .chip = { .base = S3C2410_GPA0, .owner = THIS_MODULE, -@@ -161,97 +71,87 @@ +@@ -161,97 +71,87 @@ static struct s3c24xx_gpio_chip gpios[] .ngpio = 24, .direction_input = s3c24xx_gpiolib_banka_input, .direction_output = s3c24xx_gpiolib_banka_output, @@ -29222,7 +29222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define irqdbf(x...) #define irqdbf2(x...) -@@ -25,8 +31,15 @@ +@@ -25,8 +31,15 @@ s3c_irqsub_mask(unsigned int irqno, unsi { unsigned long mask; unsigned long submask; @@ -29238,7 +29238,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mask = __raw_readl(S3C2410_INTMSK); submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); -@@ -39,6 +52,9 @@ +@@ -39,6 +52,9 @@ s3c_irqsub_mask(unsigned int irqno, unsi /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); @@ -29248,7 +29248,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } -@@ -47,8 +63,15 @@ +@@ -47,8 +63,15 @@ s3c_irqsub_unmask(unsigned int irqno, un { unsigned long mask; unsigned long submask; @@ -29264,7 +29264,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mask = __raw_readl(S3C2410_INTMSK); submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); -@@ -57,6 +80,9 @@ +@@ -57,6 +80,9 @@ s3c_irqsub_unmask(unsigned int irqno, un /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); __raw_writel(mask, S3C2410_INTMSK); @@ -29855,7 +29855,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h -@@ -16,7 +16,7 @@ +@@ -16,7 +16,7 @@ struct s3c2410_uartcfg; extern int s3c2443_init(void); @@ -30054,7 +30054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static inline void -@@ -155,9 +67,19 @@ +@@ -155,9 +67,19 @@ s3c_irq_maskack(unsigned int irqno) { unsigned long bitval = 1UL << (irqno - IRQ_EINT0); unsigned long mask; @@ -30074,7 +30074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 __raw_writel(bitval, S3C2410_SRCPND); __raw_writel(bitval, S3C2410_INTPND); -@@ -168,15 +90,25 @@ +@@ -168,15 +90,25 @@ static void s3c_irq_unmask(unsigned int irqno) { unsigned long mask; @@ -30100,7 +30100,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } struct irq_chip s3c_irq_level_chip = { -@@ -589,59 +521,6 @@ +@@ -589,59 +521,6 @@ s3c_irq_demux_extint4t7(unsigned int irq } } @@ -30160,7 +30160,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system -@@ -672,26 +551,26 @@ +@@ -672,26 +551,26 @@ void __init s3c24xx_init_irq(void) last = 0; for (i = 0; i < 4; i++) { @@ -30353,7 +30353,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. -@@ -49,9 +63,31 @@ +@@ -49,9 +63,31 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. @@ -30387,7 +30387,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile -@@ -17,9 +17,8 @@ +@@ -17,9 +17,8 @@ obj-y += irq.o obj-y += devs.o obj-y += gpio.o obj-y += gpiolib.o @@ -30398,7 +30398,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Architecture dependant builds -@@ -28,7 +27,26 @@ +@@ -28,7 +27,26 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o @@ -31940,7 +31940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { -@@ -76,371 +67,26 @@ +@@ -76,371 +67,26 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), @@ -32317,7 +32317,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { unsigned long irqstate; unsigned long pinstate; -@@ -455,21 +101,21 @@ +@@ -455,21 +101,21 @@ static void s3c2410_pm_check_resume_pin( if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) @@ -32343,7 +32343,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { int pin; -@@ -479,336 +125,24 @@ +@@ -479,336 +125,24 @@ static void s3c2410_pm_configure_extint( */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { @@ -32690,7 +32690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 -} --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c -@@ -61,7 +61,7 @@ +@@ -61,7 +61,7 @@ static __init int pm_simtec_init(void) __raw_writel(gstatus4, S3C2410_GSTATUS4); @@ -33014,7 +33014,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), -@@ -56,32 +59,37 @@ +@@ -56,32 +59,37 @@ void __init s3c244x_init_uarts(struct s3 s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); } @@ -33059,7 +33059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clkdiv = __raw_readl(S3C2410_CLKDIVN); camdiv = __raw_readl(S3C2440_CAMDIVN); -@@ -107,18 +115,24 @@ +@@ -107,18 +115,24 @@ void __init s3c244x_init_clocks(int xtal } hclk = fclk / hdiv; @@ -33086,7 +33086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2410_baseclk_add(); } -@@ -134,13 +148,13 @@ +@@ -134,13 +148,13 @@ static struct sleep_save s3c244x_sleep[] static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) { @@ -33112,7 +33112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <linux/clk.h> #include <linux/io.h> -@@ -102,13 +101,13 @@ +@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_de if (clk_get_rate(clock_upll) > (94 * MHZ)) { clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; @@ -33187,7 +33187,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 stmfd sp!, { r4 - r12, lr } @@ store co-processor registers -@@ -84,7 +84,7 @@ +@@ -84,7 +84,7 @@ resume_with_mmu: .ltorg @@ the next bits sit in the .data segment, even though they @@ -33196,7 +33196,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 @@ accessed by the resume code before it can restore the MMU. @@ This means that the variable has to be close enough for the @@ code to read it... since the .text segment needs to be RO, -@@ -92,19 +92,19 @@ +@@ -92,19 +92,19 @@ resume_with_mmu: .data @@ -33220,7 +33220,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * * resume code entry for bootloader to call * -@@ -113,7 +113,7 @@ +@@ -113,7 +113,7 @@ s3c2410_sleep_save_phys: * must not write to the code segment (code is read-only) */ @@ -33229,7 +33229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 -@@ -145,7 +145,7 @@ +@@ -145,7 +145,7 @@ ENTRY(s3c2410_cpu_resume) mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches @@ -33361,7 +33361,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define TIMER_USEC_SHIFT 16 -@@ -177,11 +183,7 @@ +@@ -177,11 +183,7 @@ static void s3c2410_timer_setup (void) tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; } else { @@ -33374,7 +33374,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * 70MHz are not values we can directly generate the timer * value from, we need to pre-scale and divide before using it. * -@@ -189,19 +191,9 @@ +@@ -189,19 +191,9 @@ static void s3c2410_timer_setup (void) * (8.45 ticks per usec) */ @@ -33395,7 +33395,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; tcfg1 |= S3C2410_TCFG1_MUX4_DIV2; -@@ -245,16 +237,244 @@ +@@ -245,16 +237,244 @@ static void s3c2410_timer_setup (void) tcon |= S3C2410_TCON_T4START; tcon &= ~S3C2410_TCON_T4MANUALUPD; __raw_writel(tcon, S3C2410_TCON); @@ -38455,7 +38455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt -@@ -40,13 +40,13 @@ +@@ -40,13 +40,13 @@ Resuming Machine Support --------------- @@ -38472,7 +38472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 needs to setup anything else for power management support. There is currently no support for over-riding the default method of -@@ -74,7 +74,7 @@ +@@ -74,7 +74,7 @@ statuc void __init machine_init(void) enable_irq_wake(IRQ_EINT0); @@ -78733,7 +78733,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* _WMI_HOST_H_ */ --- a/drivers/base/bus.c +++ b/drivers/base/bus.c -@@ -141,6 +141,29 @@ +@@ -141,6 +141,29 @@ void bus_remove_file(struct bus_type *bu } EXPORT_SYMBOL_GPL(bus_remove_file); @@ -78765,7 +78765,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; --- a/drivers/base/core.c +++ b/drivers/base/core.c -@@ -55,6 +55,11 @@ +@@ -55,6 +55,11 @@ static inline int device_is_not_partitio */ const char *dev_driver_string(const struct device *dev) { @@ -78779,7 +78779,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 (dev->class ? dev->class->name : "")); --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c -@@ -69,9 +69,9 @@ +@@ -69,9 +69,9 @@ void device_pm_unlock(void) */ void device_pm_add(struct device *dev) { @@ -78793,7 +78793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (dev->parent->power.status >= DPM_SUSPENDING) --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig -@@ -66,6 +66,18 @@ +@@ -66,6 +66,18 @@ config VT_CONSOLE If unsure, say Y. @@ -78844,7 +78844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* i2c controller state */ -@@ -64,6 +62,7 @@ +@@ -64,6 +62,7 @@ struct s3c24xx_i2c { unsigned int msg_ptr; unsigned int tx_setup; @@ -78852,7 +78852,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 enum s3c24xx_i2c_state state; unsigned long clkrate; -@@ -71,7 +70,6 @@ +@@ -71,7 +70,6 @@ struct s3c24xx_i2c { void __iomem *regs; struct clk *clk; struct device *dev; @@ -78860,7 +78860,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct resource *ioarea; struct i2c_adapter adap; -@@ -80,16 +78,7 @@ +@@ -80,16 +78,7 @@ struct s3c24xx_i2c { #endif }; @@ -78878,7 +78878,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_is2440() * -@@ -103,21 +92,6 @@ +@@ -103,21 +92,6 @@ static inline int s3c24xx_i2c_is2440(str return !strcmp(pdev->name, "s3c2440-i2c"); } @@ -78900,7 +78900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_master_complete * * complete the message and wake up the caller, using the given return code, -@@ -130,7 +104,7 @@ +@@ -130,7 +104,7 @@ static inline void s3c24xx_i2c_master_co i2c->msg_ptr = 0; i2c->msg = NULL; @@ -78909,7 +78909,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; -@@ -141,19 +115,17 @@ +@@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_master_co static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; @@ -78931,7 +78931,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* irq enable/disable functions */ -@@ -161,15 +133,23 @@ +@@ -161,15 +133,23 @@ static inline void s3c24xx_i2c_enable_ac static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; @@ -78957,7 +78957,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } -@@ -177,10 +157,10 @@ +@@ -177,10 +157,10 @@ static inline void s3c24xx_i2c_enable_ir /* s3c24xx_i2c_message_start * @@ -78970,7 +78970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct i2c_msg *msg) { unsigned int addr = (msg->addr & 0x7f) << 1; -@@ -199,15 +179,15 @@ +@@ -199,15 +179,15 @@ static void s3c24xx_i2c_message_start(st if (msg->flags & I2C_M_REV_DIR_ADDR) addr ^= 1; @@ -78989,7 +78989,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* delay here to ensure the data byte has gotten onto the bus * before the transaction is started */ -@@ -215,8 +195,8 @@ +@@ -215,8 +195,8 @@ static void s3c24xx_i2c_message_start(st dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); writel(iiccon, i2c->regs + S3C2410_IICCON); @@ -79000,7 +79000,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writel(stat, i2c->regs + S3C2410_IICSTAT); } -@@ -227,11 +207,11 @@ +@@ -227,11 +207,11 @@ static inline void s3c24xx_i2c_stop(stru dev_dbg(i2c->dev, "STOP\n"); /* stop the transfer */ @@ -79015,7 +79015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_i2c_master_complete(i2c, ret); s3c24xx_i2c_disable_irq(i2c); } -@@ -241,7 +221,7 @@ +@@ -241,7 +221,7 @@ static inline void s3c24xx_i2c_stop(stru /* is_lastmsg() * @@ -79024,7 +79024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 */ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) -@@ -289,14 +269,14 @@ +@@ -289,14 +269,14 @@ static int i2s_s3c_irq_nextbyte(struct s case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); @@ -79041,7 +79041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ -@@ -322,7 +302,7 @@ +@@ -322,7 +302,7 @@ static int i2s_s3c_irq_nextbyte(struct s if (i2c->state == STATE_READ) goto prepare_read; @@ -79050,7 +79050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * send a byte as well */ case STATE_WRITE: -@@ -339,7 +319,7 @@ +@@ -339,7 +319,7 @@ static int i2s_s3c_irq_nextbyte(struct s } } @@ -79059,7 +79059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; -@@ -359,9 +339,9 @@ +@@ -359,9 +339,9 @@ static int i2s_s3c_irq_nextbyte(struct s dev_dbg(i2c->dev, "WRITE: Next Message\n"); i2c->msg_ptr = 0; @@ -79071,7 +79071,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* check to see if we need to do another message */ if (i2c->msg->flags & I2C_M_NOSTART) { -@@ -375,7 +355,6 @@ +@@ -375,7 +355,6 @@ static int i2s_s3c_irq_nextbyte(struct s goto retry_write; } else { @@ -79079,7 +79079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* send the new start */ s3c24xx_i2c_message_start(i2c, i2c->msg); i2c->state = STATE_START; -@@ -389,7 +368,7 @@ +@@ -389,7 +368,7 @@ static int i2s_s3c_irq_nextbyte(struct s break; case STATE_READ: @@ -79088,7 +79088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * something with it, and then work out wether we are * going to do any more read/write */ -@@ -397,13 +376,13 @@ +@@ -397,13 +376,13 @@ static int i2s_s3c_irq_nextbyte(struct s byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; @@ -79104,7 +79104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } else if (is_msgend(i2c)) { /* ok, we've read the entire buffer, see if there * is anything else we need to do */ -@@ -429,7 +408,7 @@ +@@ -429,7 +408,7 @@ static int i2s_s3c_irq_nextbyte(struct s /* acknowlegde the IRQ and get back on with the work */ out_ack: @@ -79113,7 +79113,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); out: -@@ -450,19 +429,19 @@ +@@ -450,19 +429,19 @@ static irqreturn_t s3c24xx_i2c_irq(int i status = readl(i2c->regs + S3C2410_IICSTAT); if (status & S3C2410_IICSTAT_ARBITR) { @@ -79136,7 +79136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ -@@ -485,16 +464,13 @@ +@@ -485,16 +464,13 @@ static int s3c24xx_i2c_set_master(struct while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); @@ -79154,7 +79154,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return -ETIMEDOUT; } -@@ -503,7 +479,8 @@ +@@ -503,7 +479,8 @@ static int s3c24xx_i2c_set_master(struct * this starts an i2c transfer */ @@ -79164,7 +79164,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { unsigned long timeout; int ret; -@@ -511,6 +488,15 @@ +@@ -511,6 +488,15 @@ static int s3c24xx_i2c_doxfer(struct s3c if (i2c->suspended) return -EIO; @@ -79180,7 +79180,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); -@@ -529,12 +515,12 @@ +@@ -529,12 +515,12 @@ static int s3c24xx_i2c_doxfer(struct s3c s3c24xx_i2c_enable_irq(i2c); s3c24xx_i2c_message_start(i2c, msgs); spin_unlock_irq(&i2c->lock); @@ -79195,7 +79195,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * noisy when doing an i2cdetect */ if (timeout == 0) -@@ -591,19 +577,6 @@ +@@ -591,19 +577,6 @@ static const struct i2c_algorithm s3c24x .functionality = s3c24xx_i2c_func, }; @@ -79215,7 +79215,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_calcdivisor * * return the divisor settings for a given frequency -@@ -643,7 +616,7 @@ +@@ -643,7 +616,7 @@ static inline int freq_acceptable(unsign { int diff = freq - wanted; @@ -79224,7 +79224,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* s3c24xx_i2c_clockrate -@@ -655,7 +628,7 @@ +@@ -655,7 +628,7 @@ static inline int freq_acceptable(unsign static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { @@ -79233,7 +79233,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned long clkin = clk_get_rate(i2c->clk); unsigned int divs, div1; u32 iiccon; -@@ -663,10 +636,8 @@ +@@ -663,10 +636,8 @@ static int s3c24xx_i2c_clockrate(struct int start, end; i2c->clkrate = clkin; @@ -79245,7 +79245,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); -@@ -774,7 +745,7 @@ +@@ -774,7 +745,7 @@ static inline void s3c24xx_i2c_deregiste /* s3c24xx_i2c_init * @@ -79254,7 +79254,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 */ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) -@@ -785,15 +756,15 @@ +@@ -785,15 +756,15 @@ static int s3c24xx_i2c_init(struct s3c24 /* get the plafrom data */ @@ -79274,7 +79274,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); -@@ -831,12 +802,32 @@ +@@ -831,12 +802,32 @@ static int s3c24xx_i2c_init(struct s3c24 static int s3c24xx_i2c_probe(struct platform_device *pdev) { @@ -79309,7 +79309,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* find the clock and enable it */ -@@ -878,7 +869,8 @@ +@@ -878,7 +869,8 @@ static int s3c24xx_i2c_probe(struct plat goto err_ioarea; } @@ -79319,7 +79319,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup info block for the i2c core */ -@@ -892,29 +884,23 @@ +@@ -892,29 +884,23 @@ static int s3c24xx_i2c_probe(struct plat goto err_iomap; /* find the IRQ for this unit (note, this relies on the init call to @@ -79355,7 +79355,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); -@@ -944,7 +930,7 @@ +@@ -944,7 +930,7 @@ static int s3c24xx_i2c_probe(struct plat s3c24xx_i2c_deregister_cpufreq(i2c); err_irq: @@ -79364,7 +79364,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 err_iomap: iounmap(i2c->regs); -@@ -958,6 +944,7 @@ +@@ -958,6 +944,7 @@ static int s3c24xx_i2c_probe(struct plat clk_put(i2c->clk); err_noclk: @@ -79372,7 +79372,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return ret; } -@@ -973,7 +960,7 @@ +@@ -973,7 +960,7 @@ static int s3c24xx_i2c_remove(struct pla s3c24xx_i2c_deregister_cpufreq(i2c); i2c_del_adapter(&i2c->adap); @@ -79381,7 +79381,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_disable(i2c->clk); clk_put(i2c->clk); -@@ -982,6 +969,7 @@ +@@ -982,6 +969,7 @@ static int s3c24xx_i2c_remove(struct pla release_resource(i2c->ioarea); kfree(i2c->ioarea); @@ -79391,7 +79391,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -455,11 +455,12 @@ +@@ -455,11 +455,12 @@ config I2C_PXA_SLAVE I2C bus. config I2C_S3C2410 @@ -79409,7 +79409,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tristate "Renesas SH7760 I2C Controller" --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig -@@ -53,6 +53,26 @@ +@@ -53,6 +53,26 @@ config SENSORS_EEPROM This driver can also be built as a module. If so, the module will be called eeprom. @@ -79436,7 +79436,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCF857X = "n" -@@ -185,4 +205,23 @@ +@@ -185,4 +205,23 @@ config MCU_MPC8349EMITX also register MCU GPIOs with the generic GPIO API, so you'll able to use MCU pins as GPIOs. @@ -79462,7 +79462,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endmenu --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile -@@ -15,6 +15,8 @@ +@@ -15,6 +15,8 @@ obj-$(CONFIG_AT24) += at24.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o @@ -79471,7 +79471,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o -@@ -23,6 +25,8 @@ +@@ -23,6 +25,8 @@ obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o @@ -84455,7 +84455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-99 Simon G. Vogl -@@ -158,10 +157,16 @@ +@@ -158,10 +157,16 @@ static int i2c_device_suspend(struct dev if (!dev->driver) return 0; @@ -84472,7 +84472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static int i2c_device_resume(struct device * dev) -@@ -170,10 +175,16 @@ +@@ -170,10 +175,16 @@ static int i2c_device_resume(struct devi if (!dev->driver) return 0; @@ -84489,7 +84489,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void i2c_client_release(struct device *dev) -@@ -1129,11 +1140,11 @@ +@@ -1129,11 +1140,11 @@ static int i2c_probe_address(struct i2c_ int err; /* Make sure the address is valid */ @@ -84516,7 +84516,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct gpio_keys_button *button; --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig -@@ -323,4 +323,21 @@ +@@ -323,4 +323,21 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. @@ -84540,7 +84540,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile -@@ -14,6 +14,8 @@ +@@ -14,6 +14,8 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomo obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o @@ -85253,7 +85253,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig -@@ -236,4 +236,25 @@ +@@ -236,4 +236,25 @@ config INPUT_GPIO_BUTTONS To compile this driver as a module, choose M here: the module will be called gpio-buttons. @@ -86158,7 +86158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +module_exit(lis302dl_exit); --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile -@@ -22,3 +22,6 @@ +@@ -22,3 +22,6 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o @@ -86419,7 +86419,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-input"); --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c -@@ -1016,6 +1016,7 @@ +@@ -1016,6 +1016,7 @@ static const struct input_device_id mous .evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_REL) }, .relbit = { BIT_MASK(REL_WHEEL) }, }, /* A separate scrollwheel */ @@ -86427,7 +86427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | -@@ -1025,6 +1026,7 @@ +@@ -1025,6 +1026,7 @@ static const struct input_device_id mous .absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) }, }, /* A tablet like device, at least touch detection, two absolute axes */ @@ -86437,7 +86437,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 INPUT_DEVICE_ID_MATCH_KEYBIT | --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig -@@ -11,6 +11,50 @@ +@@ -11,6 +11,50 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN @@ -86488,7 +86488,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config TOUCHSCREEN_ADS7846 tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" depends on SPI_MASTER -@@ -71,6 +115,25 @@ +@@ -71,6 +115,25 @@ config TOUCHSCREEN_FUJITSU To compile this driver as a module, choose M here: the module will be called fujitsu-ts. @@ -86514,7 +86514,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO -@@ -376,4 +439,15 @@ +@@ -376,4 +439,15 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. @@ -86532,7 +86532,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile -@@ -31,3 +31,10 @@ +@@ -31,3 +31,10 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o @@ -88029,7 +88029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +}; --- a/drivers/Kconfig +++ b/drivers/Kconfig -@@ -107,4 +107,6 @@ +@@ -107,4 +107,6 @@ source "drivers/uio/Kconfig" source "drivers/xen/Kconfig" source "drivers/staging/Kconfig" @@ -88038,7 +88038,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endmenu --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -33,7 +33,7 @@ +@@ -33,7 +33,7 @@ config LEDS_LOCOMO config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" @@ -88047,7 +88047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help This option enables support for LEDs connected to GPIO lines on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. -@@ -171,6 +171,18 @@ +@@ -171,6 +171,18 @@ config LEDS_DA903X This option enables support for on-chip LED drivers found on Dialog Semiconductor DA9030/DA9034 PMICs. @@ -88068,7 +88068,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config LEDS_TRIGGERS --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c -@@ -56,8 +56,10 @@ +@@ -56,8 +56,10 @@ static ssize_t led_brightness_store(stru if (count == size) { ret = count; @@ -88475,7 +88475,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -24,6 +24,8 @@ +@@ -24,6 +24,8 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o @@ -88486,7 +88486,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o --- a/drivers/Makefile +++ b/drivers/Makefile -@@ -86,6 +86,7 @@ +@@ -86,6 +86,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/ obj-y += idle/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_MEMSTICK) += memstick/ @@ -88494,7 +88494,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_NEW_LEDS) += leds/ obj-$(CONFIG_INFINIBAND) += infiniband/ obj-$(CONFIG_SGI_SN) += sn/ -@@ -98,6 +99,7 @@ +@@ -98,6 +99,7 @@ obj-$(CONFIG_DCA) += dca/ obj-$(CONFIG_HID) += hid/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ @@ -93571,7 +93571,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig -@@ -153,6 +153,55 @@ +@@ -153,6 +153,55 @@ config MFD_WM8350_I2C I2C as the control interface. Additional options must be selected to enable support for the functionality of the chip. @@ -93637,7 +93637,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o -@@ -31,4 +32,13 @@ +@@ -31,4 +32,13 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-ass endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o @@ -95605,7 +95605,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig -@@ -401,6 +401,11 @@ +@@ -401,6 +401,11 @@ config THINKPAD_ACPI_HOTKEY_POLL If you are not sure, say Y here. The driver enables polling only if it is strictly necessary to do so. @@ -95617,7 +95617,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 -@@ -500,4 +505,9 @@ +@@ -500,4 +505,9 @@ config SGI_GRU_DEBUG source "drivers/misc/c2port/Kconfig" @@ -95751,7 +95751,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile -@@ -33,3 +33,8 @@ +@@ -33,3 +33,8 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_C2PORT) += c2port/ @@ -96429,7 +96429,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c -@@ -57,10 +57,11 @@ +@@ -57,10 +57,11 @@ static int mmc_schedule_delayed_work(str /* * Internal function. Flush all scheduled work from the MMC work queue. */ @@ -96442,7 +96442,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * mmc_request_done - finish processing an MMC request -@@ -495,7 +496,13 @@ +@@ -495,7 +496,13 @@ void mmc_set_timing(struct mmc_host *hos */ static void mmc_power_up(struct mmc_host *host) { @@ -96459,7 +96459,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (mmc_host_is_spi(host)) { --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -48,6 +48,18 @@ +@@ -48,6 +48,18 @@ config MMC_SDHCI_PCI If unsure, say N. @@ -96480,7 +96480,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on MMC_SDHCI_PCI --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile -@@ -11,6 +11,7 @@ +@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o @@ -96515,7 +96515,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "s3cmci.h" -@@ -47,6 +56,9 @@ +@@ -47,6 +56,9 @@ static const int dbgmap_err = dbg_fail static const int dbgmap_info = dbg_info | dbg_conf; static const int dbgmap_debug = dbg_err | dbg_debug; @@ -96525,7 +96525,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define dbg(host, channels, args...) \ do { \ if (dbgmap_err & channels) \ -@@ -280,8 +292,11 @@ +@@ -280,8 +292,11 @@ static void do_pio_read(struct s3cmci_ho * an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; @@ -96538,7 +96538,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 host->pio_bytes -= fifo; host->pio_count += fifo; -@@ -353,8 +368,11 @@ +@@ -353,8 +368,11 @@ static void do_pio_write(struct s3cmci_h * words, so round down to an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; @@ -96551,7 +96551,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 host->pio_bytes -= fifo; host->pio_count += fifo; -@@ -373,7 +391,6 @@ +@@ -373,7 +391,6 @@ static void pio_tasklet(unsigned long da { struct s3cmci_host *host = (struct s3cmci_host *) data; @@ -96559,7 +96559,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 disable_irq(host->irq); if (host->pio_active == XFER_WRITE) -@@ -614,7 +631,6 @@ +@@ -614,7 +631,6 @@ irq_out: spin_unlock_irqrestore(&host->complete_lock, iflags); return IRQ_HANDLED; @@ -96567,7 +96567,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* -@@ -1026,6 +1042,7 @@ +@@ -1026,6 +1042,7 @@ static void s3cmci_send_request(struct m dbg(host, dbg_err, "data prepare error %d\n", res); cmd->error = res; cmd->data->error = res; @@ -96575,7 +96575,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mmc_request_done(mmc, mrq); return; -@@ -1263,10 +1280,8 @@ +@@ -1263,10 +1280,8 @@ static int __devinit s3cmci_probe(struct host->is2440 = is2440; host->pdata = pdev->dev.platform_data; @@ -96587,7 +96587,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); -@@ -1379,6 +1394,18 @@ +@@ -1379,6 +1394,18 @@ static int __devinit s3cmci_probe(struct mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; @@ -96606,7 +96606,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (host->pdata->ocr_avail) mmc->ocr_avail = host->pdata->ocr_avail; -@@ -1491,18 +1518,60 @@ +@@ -1491,18 +1518,60 @@ static int __devinit s3cmci_2440_probe(s #ifdef CONFIG_PM @@ -96669,7 +96669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } #else /* CONFIG_PM */ -@@ -1560,9 +1629,13 @@ +@@ -1560,9 +1629,13 @@ static void __exit s3cmci_exit(void) module_init(s3cmci_init); module_exit(s3cmci_exit); @@ -96695,7 +96695,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* FIXME: DMA Resource management ?! */ #define S3CMCI_DMA 0 -@@ -68,6 +71,13 @@ +@@ -68,6 +71,13 @@ struct s3cmci_host { unsigned int ccnt, dcnt; struct tasklet_struct pio_tasklet; @@ -96711,7 +96711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c -@@ -73,6 +73,11 @@ +@@ -73,6 +73,11 @@ static void sdhci_dumpregs(struct sdhci_ readl(host->ioaddr + SDHCI_CAPABILITIES), readl(host->ioaddr + SDHCI_MAX_CURRENT)); @@ -96723,7 +96723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); } -@@ -731,6 +736,23 @@ +@@ -731,6 +736,23 @@ static void sdhci_set_transfer_mode(stru writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); } @@ -96747,7 +96747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; -@@ -744,6 +766,8 @@ +@@ -744,6 +766,8 @@ static void sdhci_finish_data(struct sdh if (host->flags & SDHCI_USE_ADMA) sdhci_adma_table_post(host, data); else { @@ -96756,7 +96756,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, (data->flags & MMC_DATA_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); -@@ -883,13 +907,18 @@ +@@ -883,13 +907,18 @@ static void sdhci_finish_command(struct static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { @@ -96778,7 +96778,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); if (clock == 0) -@@ -926,6 +955,8 @@ +@@ -926,6 +955,8 @@ out: host->clock = clock; } @@ -96787,7 +96787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void sdhci_set_power(struct sdhci_host *host, unsigned short power) { u8 pwr; -@@ -999,12 +1030,13 @@ +@@ -999,12 +1030,13 @@ static void sdhci_request(struct mmc_hos #endif host->mrq = mrq; @@ -96802,7 +96802,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 sdhci_send_command(host, mrq->cmd); mmiowb(); -@@ -1033,6 +1065,9 @@ +@@ -1033,6 +1065,9 @@ static void sdhci_set_ios(struct mmc_hos sdhci_init(host); } @@ -96812,7 +96812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 sdhci_set_clock(host, ios->clock); if (ios->power_mode == MMC_POWER_OFF) -@@ -1136,7 +1171,7 @@ +@@ -1136,7 +1171,7 @@ static void sdhci_tasklet_card(unsigned host = (struct sdhci_host*)param; spin_lock_irqsave(&host->lock, flags); @@ -96821,7 +96821,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { if (host->mrq) { printk(KERN_ERR "%s: Card removed during transfer!\n", -@@ -1151,7 +1186,7 @@ +@@ -1151,7 +1186,7 @@ static void sdhci_tasklet_card(unsigned tasklet_schedule(&host->finish_tasklet); } } @@ -96830,7 +96830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 spin_unlock_irqrestore(&host->lock, flags); mmc_detect_change(host->mmc, msecs_to_jiffies(200)); -@@ -1607,17 +1642,23 @@ +@@ -1607,17 +1642,23 @@ int sdhci_add_host(struct sdhci_host *ho mmc_dev(host->mmc)->dma_mask = &host->dma_mask; } @@ -96869,7 +96869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 -@@ -270,6 +271,14 @@ +@@ -270,6 +271,14 @@ struct sdhci_host { struct sdhci_ops { int (*enable_dma)(struct sdhci_host *host); @@ -96884,7 +96884,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; -@@ -277,6 +286,8 @@ +@@ -277,6 +286,8 @@ extern struct sdhci_host *sdhci_alloc_ho size_t priv_size); extern void sdhci_free_host(struct sdhci_host *host); @@ -96895,7 +96895,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return (void *)host->private; --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c -@@ -392,6 +392,7 @@ +@@ -392,6 +392,7 @@ static int sdhci_pci_enable_dma(struct s static struct sdhci_ops sdhci_pci_ops = { .enable_dma = sdhci_pci_enable_dma, @@ -97338,7 +97338,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; -@@ -231,8 +231,6 @@ +@@ -231,8 +231,6 @@ static int s3c2410_nand_setrate(struct s BUG(); } @@ -97347,7 +97347,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 local_irq_save(flags); cfg = readl(info->regs + S3C2410_NFCONF); -@@ -240,6 +238,8 @@ +@@ -240,6 +238,8 @@ static int s3c2410_nand_setrate(struct s cfg |= set; writel(cfg, info->regs + S3C2410_NFCONF); @@ -97356,7 +97356,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 local_irq_restore(flags); return 0; -@@ -438,7 +438,7 @@ +@@ -438,7 +438,7 @@ static int s3c2410_nand_correct_data(str if ((diff0 & ~(1<<fls(diff0))) == 0) return 1; @@ -97365,7 +97365,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* ECC functions -@@ -530,7 +530,12 @@ +@@ -530,7 +530,12 @@ static void s3c2410_nand_read_buf(struct static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); @@ -97378,7 +97378,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -@@ -645,17 +650,31 @@ +@@ -645,17 +650,31 @@ static int s3c2410_nand_remove(struct pl } #ifdef CONFIG_MTD_PARTITIONS @@ -97412,7 +97412,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return add_mtd_device(&mtd->mtd); } #else -@@ -684,9 +703,13 @@ +@@ -684,9 +703,13 @@ static void s3c2410_nand_init_chip(struc chip->select_chip = s3c2410_nand_select_chip; chip->chip_delay = 50; chip->priv = nmtd; @@ -97427,7 +97427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 switch (info->cpu_type) { case TYPE_S3C2410: chip->IO_ADDR_W = regs + S3C2410_NFDATA; -@@ -726,7 +749,7 @@ +@@ -726,7 +749,7 @@ static void s3c2410_nand_init_chip(struc nmtd->mtd.owner = THIS_MODULE; nmtd->set = set; @@ -97438,7 +97438,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 chip->ecc.mode = NAND_ECC_HW; --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c -@@ -48,6 +48,7 @@ +@@ -48,6 +48,7 @@ module_param_named(fw_name, lbs_fw_name, static const struct sdio_device_id if_sdio_ids[] = { { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) }, @@ -97446,7 +97446,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { /* end: all zeroes */ }, }; -@@ -72,7 +73,12 @@ +@@ -72,7 +73,12 @@ static struct if_sdio_model if_sdio_mode .helper = "sd8686_helper.bin", .firmware = "sd8686.bin", }, @@ -97473,7 +97473,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 peripherals to be configured by software, e.g. assign IRQ's or other --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c -@@ -436,6 +436,7 @@ +@@ -436,6 +436,7 @@ int pnp_check_dma(struct pnp_dev *dev, s } } @@ -97481,7 +97481,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* check if the resource is already in use, skip if the * device is active because it itself may be in use */ if (!dev->active) { -@@ -443,6 +444,7 @@ +@@ -443,6 +444,7 @@ int pnp_check_dma(struct pnp_dev *dev, s return 0; free_dma(*dma); } @@ -98252,7 +98252,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig -@@ -68,4 +68,24 @@ +@@ -68,4 +68,24 @@ config BATTERY_BQ27x00 help Say Y here to enable support for batteries with BQ27200(I2C) chip. @@ -98279,7 +98279,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/power/Makefile +++ b/drivers/power/Makefile -@@ -23,3 +23,9 @@ +@@ -23,3 +23,9 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_batte obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o @@ -98709,7 +98709,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-mbc"); --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c -@@ -1113,6 +1113,7 @@ +@@ -1113,6 +1113,7 @@ int regulator_disable(struct regulator * if (!regulator->enabled) { printk(KERN_ERR "%s: not in use by this consumer\n", __func__); @@ -98719,7 +98719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig -@@ -73,4 +73,10 @@ +@@ -73,4 +73,10 @@ config REGULATOR_DA903X Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. @@ -98732,7 +98732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile -@@ -11,5 +11,6 @@ +@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq240 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o @@ -99074,7 +99074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-regulator"); --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig -@@ -219,6 +219,18 @@ +@@ -219,6 +219,18 @@ config RTC_DRV_PCF8583 This driver can also be built as a module. If so, the module will be called rtc-pcf8583. @@ -99095,7 +99095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile -@@ -50,6 +50,8 @@ +@@ -50,6 +50,8 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o @@ -99723,7 +99723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * of these rtc blocks in */ --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig -@@ -447,7 +447,7 @@ +@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" @@ -99732,7 +99732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, -@@ -455,6 +455,16 @@ +@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. @@ -99749,7 +99749,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" depends on SERIAL_SAMSUNG && DEBUG_LL -@@ -508,7 +518,20 @@ +@@ -508,7 +518,20 @@ config SERIAL_S3C2440 help Serial port support for the Samsung S3C2440 and S3C2442 SoC @@ -99773,7 +99773,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 bool "DECstation DZ serial driver" --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile -@@ -41,6 +41,8 @@ +@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400. obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o @@ -100109,7 +100109,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* macros to change one thing to another */ #define tx_enabled(port) ((port)->unused[0]) -@@ -136,8 +128,10 @@ +@@ -136,8 +128,10 @@ static void s3c24xx_serial_rx_disable(st static void s3c24xx_serial_stop_tx(struct uart_port *port) { @@ -100121,7 +100121,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); -@@ -146,11 +140,13 @@ +@@ -146,11 +140,13 @@ static void s3c24xx_serial_stop_tx(struc static void s3c24xx_serial_start_tx(struct uart_port *port) { @@ -100136,7 +100136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tx_enabled(port) = 1; } } -@@ -158,9 +154,11 @@ +@@ -158,9 +154,11 @@ static void s3c24xx_serial_start_tx(stru static void s3c24xx_serial_stop_rx(struct uart_port *port) { @@ -100149,7 +100149,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 rx_enabled(port) = 0; } } -@@ -241,7 +239,7 @@ +@@ -241,7 +239,7 @@ s3c24xx_serial_rx_chars(int irq, void *d port->icount.rx++; if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { @@ -100158,7 +100158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ch, uerstat); /* check for break */ -@@ -384,13 +382,13 @@ +@@ -384,13 +382,13 @@ static void s3c24xx_serial_shutdown(stru struct s3c24xx_uart_port *ourport = to_ourport(port); if (ourport->tx_claimed) { @@ -100174,7 +100174,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ourport->rx_claimed = 0; rx_enabled(port) = 0; } -@@ -407,12 +405,11 @@ +@@ -407,12 +405,11 @@ static int s3c24xx_serial_startup(struct rx_enabled(port) = 1; @@ -100189,7 +100189,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return ret; } -@@ -422,12 +419,11 @@ +@@ -422,12 +419,11 @@ static int s3c24xx_serial_startup(struct tx_enabled(port) = 1; @@ -100204,7 +100204,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 goto err; } -@@ -452,6 +448,8 @@ +@@ -452,6 +448,8 @@ static void s3c24xx_serial_pm(struct uar { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -100213,7 +100213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 switch (level) { case 3: if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) -@@ -514,6 +512,7 @@ +@@ -514,6 +512,7 @@ s3c24xx_serial_setsource(struct uart_por struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; @@ -100221,7 +100221,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned int quot; struct clk *src; }; -@@ -523,6 +522,7 @@ +@@ -523,6 +522,7 @@ static int s3c24xx_serial_calcbaud(struc struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { @@ -100229,7 +100229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); -@@ -533,8 +533,24 @@ +@@ -533,8 +533,24 @@ static int s3c24xx_serial_calcbaud(struc rate /= clksrc->divisor; calc->clksrc = clksrc; @@ -100256,7 +100256,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 calc->quot--; return 1; -@@ -617,6 +633,30 @@ +@@ -617,6 +633,30 @@ static unsigned int s3c24xx_serial_getcl return best->quot; } @@ -100287,7 +100287,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) -@@ -629,6 +669,7 @@ +@@ -629,6 +669,7 @@ static void s3c24xx_serial_set_termios(s unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; @@ -100295,7 +100295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * We don't support modem control lines. -@@ -650,6 +691,7 @@ +@@ -650,6 +691,7 @@ static void s3c24xx_serial_set_termios(s /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { @@ -100303,7 +100303,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { -@@ -661,6 +703,14 @@ +@@ -661,6 +703,14 @@ static void s3c24xx_serial_set_termios(s ourport->clksrc = clksrc; ourport->baudclk = clk; @@ -100318,7 +100318,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } switch (termios->c_cflag & CSIZE) { -@@ -702,12 +752,16 @@ +@@ -702,12 +752,16 @@ static void s3c24xx_serial_set_termios(s spin_lock_irqsave(&port->lock, flags); @@ -100336,7 +100336,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), -@@ -752,6 +806,8 @@ +@@ -752,6 +806,8 @@ static const char *s3c24xx_serial_type(s return "S3C2440"; case PORT_S3C2412: return "S3C2412"; @@ -100345,7 +100345,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 default: return NULL; } -@@ -827,14 +883,14 @@ +@@ -827,14 +883,14 @@ static struct uart_ops s3c24xx_serial_op static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, .dev_name = "s3c2410_serial", @@ -100362,7 +100362,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = { .port = { .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), -@@ -859,7 +915,7 @@ +@@ -859,7 +915,7 @@ static struct s3c24xx_uart_port s3c24xx_ .line = 1, } }, @@ -100371,7 +100371,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [2] = { .port = { -@@ -872,10 +928,88 @@ +@@ -872,10 +928,88 @@ static struct s3c24xx_uart_port s3c24xx_ .flags = UPF_BOOT_AUTOCONF, .line = 2, } @@ -100460,7 +100460,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_serial_resetport * * wrapper to call the specific reset for this port (reset the fifos -@@ -890,6 +1024,93 @@ +@@ -890,6 +1024,93 @@ static inline int s3c24xx_serial_resetpo return (info->reset_port)(port, cfg); } @@ -100554,7 +100554,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_serial_init_port * * initialise a single serial port from the platform device given -@@ -914,8 +1135,11 @@ +@@ -914,8 +1135,11 @@ static int s3c24xx_serial_init_port(stru if (port->mapbase != 0) return 0; @@ -100568,7 +100568,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup info for port */ port->dev = &platdev->dev; -@@ -943,18 +1167,26 @@ +@@ -943,18 +1167,26 @@ static int s3c24xx_serial_init_port(stru dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); @@ -100600,7 +100600,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); -@@ -987,6 +1219,7 @@ +@@ -987,6 +1219,7 @@ int s3c24xx_serial_probe(struct platform ourport = &s3c24xx_serial_ports[probe_index]; probe_index++; @@ -100608,7 +100608,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dbg("%s: initialising port %p...\n", __func__, ourport); -@@ -1002,6 +1235,10 @@ +@@ -1002,6 +1235,10 @@ int s3c24xx_serial_probe(struct platform if (ret < 0) printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); @@ -100619,7 +100619,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; probe_err: -@@ -1015,6 +1252,7 @@ +@@ -1015,6 +1252,7 @@ int s3c24xx_serial_remove(struct platfor struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); if (port) { @@ -100627,7 +100627,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 device_remove_file(&dev->dev, &dev_attr_clock_source); uart_remove_one_port(&s3c24xx_uart_drv, port); } -@@ -1038,6 +1276,16 @@ +@@ -1038,6 +1276,16 @@ static int s3c24xx_serial_suspend(struct return 0; } @@ -100644,7 +100644,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_serial_resume(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); -@@ -1049,6 +1297,9 @@ +@@ -1049,6 +1297,9 @@ static int s3c24xx_serial_resume(struct clk_disable(ourport->clk); uart_resume_port(&s3c24xx_uart_drv, port); @@ -100654,7 +100654,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } return 0; -@@ -1059,6 +1310,12 @@ +@@ -1059,6 +1310,12 @@ int s3c24xx_serial_init(struct platform_ struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); @@ -100667,7 +100667,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_PM drv->suspend = s3c24xx_serial_suspend; -@@ -1098,6 +1355,13 @@ +@@ -1098,6 +1355,13 @@ module_exit(s3c24xx_serial_modexit); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE static struct uart_port *cons_uart; @@ -100681,7 +100681,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) -@@ -1122,9 +1386,21 @@ +@@ -1122,9 +1386,21 @@ static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); @@ -100703,7 +100703,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void -@@ -1219,7 +1495,7 @@ +@@ -1219,7 +1495,7 @@ static int s3c24xx_serial_init_ports(str platdev_ptr = s3c24xx_uart_devs; @@ -100712,7 +100712,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_serial_init_port(ptr, info, *platdev_ptr); } -@@ -1240,7 +1516,7 @@ +@@ -1240,7 +1516,7 @@ s3c24xx_serial_console_setup(struct cons /* is this a valid port */ @@ -100732,7 +100732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_uart_info { char *name; unsigned int type; -@@ -21,6 +23,10 @@ +@@ -21,6 +23,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; @@ -100743,7 +100743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); -@@ -33,12 +39,23 @@ +@@ -33,12 +39,23 @@ struct s3c24xx_uart_info { struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -100780,7 +100780,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_spi { --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c -@@ -91,7 +91,7 @@ +@@ -91,7 +91,7 @@ static void s3c2410_spigpio_chipselect(s struct s3c2410_spigpio *sg = spidev_to_sg(dev); if (sg->info && sg->info->chip_select) @@ -100789,7 +100789,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static int s3c2410_spigpio_probe(struct platform_device *dev) -@@ -100,6 +100,7 @@ +@@ -100,6 +100,7 @@ static int s3c2410_spigpio_probe(struct struct spi_master *master; struct s3c2410_spigpio *sp; int ret; @@ -100797,7 +100797,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); if (master == NULL) { -@@ -112,9 +113,11 @@ +@@ -112,9 +113,11 @@ static int s3c2410_spigpio_probe(struct platform_set_drvdata(dev, sp); @@ -100810,7 +100810,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); sp->bitbang.master->bus_num = info->bus_num; -@@ -143,6 +146,22 @@ +@@ -143,6 +146,22 @@ static int s3c2410_spigpio_probe(struct if (ret) goto err_no_bitbang; @@ -100835,7 +100835,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 err_no_bitbang: --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c -@@ -1045,7 +1045,11 @@ +@@ -1045,7 +1045,11 @@ composite_resume(struct usb_gadget *gadg /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver composite_driver = { @@ -100849,7 +100849,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .unbind = __exit_p(composite_unbind), --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c -@@ -122,11 +122,16 @@ +@@ -122,11 +122,16 @@ static inline bool has_rndis(void) * Instead: allocate your own, using normal USB-IF procedures. */ @@ -100866,7 +100866,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* For hardware that can't talk CDC, we use the same vendor ID that * ARM Linux has used for ethernet-over-usb, both with sa1100 and -@@ -147,8 +152,8 @@ +@@ -147,8 +152,8 @@ static inline bool has_rndis(void) * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose * the non-RNDIS configuration. */ @@ -100890,7 +100890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "s3c2410_udc.h" -@@ -134,6 +134,8 @@ +@@ -134,6 +134,8 @@ static int dprintk(int level, const char return 0; } #endif @@ -100899,7 +100899,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) { u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; -@@ -197,6 +199,7 @@ +@@ -197,6 +199,7 @@ static const struct file_operations s3c2 .release = single_release, .owner = THIS_MODULE, }; @@ -100907,7 +100907,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* io macros */ -@@ -843,6 +846,7 @@ +@@ -843,6 +846,7 @@ static void s3c2410_udc_handle_ep(struct u32 ep_csr1; u32 idx; @@ -100915,7 +100915,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (likely (!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct s3c2410_request, queue); -@@ -882,6 +886,8 @@ +@@ -882,6 +886,8 @@ static void s3c2410_udc_handle_ep(struct if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { s3c2410_udc_read_fifo(ep,req); @@ -100924,7 +100924,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } } } -@@ -1890,6 +1896,7 @@ +@@ -1890,6 +1896,7 @@ static int s3c2410_udc_probe(struct plat udc->vbus = 1; } @@ -100932,7 +100932,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (s3c2410_udc_debugfs_root) { udc->regs_info = debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, -@@ -1897,6 +1904,7 @@ +@@ -1897,6 +1904,7 @@ static int s3c2410_udc_probe(struct plat if (!udc->regs_info) dev_warn(dev, "debugfs file creation failed\n"); } @@ -100940,7 +100940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dev_dbg(dev, "probe ok\n"); -@@ -2003,12 +2011,14 @@ +@@ -2003,12 +2011,14 @@ static int __init udc_init(void) dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); @@ -100965,7 +100965,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define valid_port(idx) ((idx) == 1 || (idx) == 2) -@@ -308,6 +309,42 @@ +@@ -308,6 +309,42 @@ static void s3c2410_hcd_oc(struct s3c241 local_irq_restore(flags); } @@ -101008,7 +101008,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* may be called without controller electrically present */ /* may be called with controller, bus, and devices active */ -@@ -325,6 +362,7 @@ +@@ -325,6 +362,7 @@ static void s3c2410_hcd_oc(struct s3c241 static void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev) { @@ -101016,7 +101016,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 usb_remove_hcd(hcd); s3c2410_stop_hc(dev); iounmap(hcd->regs); -@@ -392,8 +430,15 @@ +@@ -392,8 +430,15 @@ static int usb_hcd_s3c2410_probe (const if (retval != 0) goto err_ioremap; @@ -101306,7 +101306,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig -@@ -152,6 +152,13 @@ +@@ -152,6 +152,13 @@ config BACKLIGHT_OMAP1 the PWL module of OMAP1 processors. Say Y if your board uses this hardware. @@ -101322,7 +101322,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile -@@ -12,6 +12,7 @@ +@@ -12,6 +12,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o @@ -101332,7 +101332,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c -@@ -401,6 +401,9 @@ +@@ -401,6 +401,9 @@ static void fb_flashcursor(struct work_s int c; int mode; @@ -101342,7 +101342,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 acquire_console_sem(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; -@@ -3225,13 +3228,17 @@ +@@ -3225,13 +3228,17 @@ static void fbcon_get_requirement(struct static int fbcon_event_notify(struct notifier_block *self, unsigned long action, void *data) { @@ -102176,7 +102176,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +module_exit(jbt_exit); --- a/drivers/video/display/Kconfig +++ b/drivers/video/display/Kconfig -@@ -21,4 +21,15 @@ +@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT comment "Display hardware drivers" depends on DISPLAY_SUPPORT @@ -102202,7 +102202,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig -@@ -1918,6 +1918,30 @@ +@@ -1918,6 +1918,30 @@ config FB_TMIO_ACCELL depends on FB_TMIO default y @@ -102235,7 +102235,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on FB && ARCH_S3C2410 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig -@@ -77,6 +77,11 @@ +@@ -77,6 +77,11 @@ config LOGO_SUPERH_CLUT224 depends on SUPERH default y @@ -102249,7 +102249,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on M32R --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c -@@ -35,6 +35,7 @@ +@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe extern const struct linux_logo logo_superh_vga16; extern const struct linux_logo logo_superh_clut224; extern const struct linux_logo logo_m32r_clut224; @@ -102257,7 +102257,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int nologo; module_param(nologo, bool, 0); -@@ -115,6 +116,10 @@ +@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f /* M32R Linux logo */ logo = &logo_m32r_clut224; #endif @@ -142276,7 +142276,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 --- a/drivers/video/logo/Makefile +++ b/drivers/video/logo/Makefile -@@ -15,6 +15,7 @@ +@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_ obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o @@ -142286,7 +142286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile -@@ -109,6 +109,7 @@ +@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_METRONOME) += met obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o @@ -142296,7 +142296,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c -@@ -1017,6 +1017,8 @@ +@@ -1017,6 +1017,8 @@ static int s3c2410fb_resume(struct platf s3c2410fb_init_registers(fbinfo); @@ -143346,7 +143346,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:s3c-fb"); --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -233,6 +233,12 @@ +@@ -233,6 +233,12 @@ config ORION5X_WATCHDOG To compile this driver as a module, choose M here: the module will be called orion5x_wdt. @@ -143359,7 +143359,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # ARM26 Architecture # AVR32 Architecture -@@ -784,7 +790,7 @@ +@@ -784,7 +790,7 @@ config WATCHDOG_RTAS tristate "RTAS watchdog" depends on PPC_RTAS help @@ -143370,7 +143370,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 will be called wdrtas. --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -41,6 +41,7 @@ +@@ -41,6 +41,7 @@ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx400 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o @@ -143607,7 +143607,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c -@@ -95,13 +95,17 @@ +@@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread( spin_unlock(&c->erase_completion_lock); @@ -145046,7 +145046,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/device.h +++ b/include/linux/device.h -@@ -48,6 +48,11 @@ +@@ -48,6 +48,11 @@ extern int __must_check bus_create_file( struct bus_attribute *); extern void bus_remove_file(struct bus_type *, struct bus_attribute *); @@ -145060,7 +145060,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct bus_attribute *bus_attrs; --- a/include/linux/fb.h +++ b/include/linux/fb.h -@@ -123,6 +123,7 @@ +@@ -123,6 +123,7 @@ struct dentry; #define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ #define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ #define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ @@ -145270,7 +145270,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/kernel.h +++ b/include/linux/kernel.h -@@ -225,6 +225,8 @@ +@@ -225,6 +225,8 @@ extern struct ratelimit_state printk_rat extern int printk_ratelimit(void); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); @@ -146781,7 +146781,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h -@@ -129,6 +129,8 @@ +@@ -129,6 +129,8 @@ struct mmc_request { struct mmc_host; struct mmc_card; @@ -146803,7 +146803,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif --- a/include/linux/mm.h +++ b/include/linux/mm.h -@@ -713,7 +713,7 @@ +@@ -713,7 +713,7 @@ static inline int shmem_lock(struct file } #endif struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags); @@ -147743,7 +147743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/suspend.h +++ b/include/linux/suspend.h -@@ -146,6 +146,12 @@ +@@ -146,6 +146,12 @@ struct pbe { struct pbe *next; }; @@ -148002,7 +148002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/vt.h +++ b/include/linux/vt.h -@@ -18,8 +18,19 @@ +@@ -18,8 +18,19 @@ extern int unregister_vt_notifier(struct * resizing). */ #define MIN_NR_CONSOLES 1 /* must be at least 1 */ @@ -148024,7 +148024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h -@@ -244,6 +244,13 @@ +@@ -244,6 +244,13 @@ int snd_soc_dapm_nc_pin(struct snd_soc_c int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin); int snd_soc_dapm_sync(struct snd_soc_codec *codec); @@ -148040,7 +148040,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 snd_soc_dapm_input = 0, /* input pin */ --- a/init/Kconfig +++ b/init/Kconfig -@@ -732,6 +732,15 @@ +@@ -720,6 +720,15 @@ config AIO by some high performance threaded applications. Disabling this option saves about 7k. @@ -148058,7 +148058,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c -@@ -380,6 +380,7 @@ +@@ -380,6 +380,7 @@ handle_level_irq(unsigned int irq, struc out_unlock: spin_unlock(&desc->lock); } @@ -148066,7 +148066,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * handle_fasteoi_irq - irq handler for transparent controllers -@@ -583,6 +584,7 @@ +@@ -583,6 +584,7 @@ __set_irq_handler(unsigned int irq, irq_ } spin_unlock_irqrestore(&desc->lock, flags); } @@ -148076,7 +148076,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, --- a/kernel/power/main.c +++ b/kernel/power/main.c -@@ -132,6 +132,9 @@ +@@ -132,6 +132,9 @@ static inline int suspend_test(int level #endif /* CONFIG_PM_SLEEP */ @@ -148086,7 +148086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_SUSPEND #ifdef CONFIG_PM_TEST_SUSPEND -@@ -322,6 +325,8 @@ +@@ -322,6 +325,8 @@ int suspend_devices_and_enter(suspend_st if (!suspend_ops) return -ENOSYS; @@ -148095,7 +148095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (suspend_ops->begin) { error = suspend_ops->begin(state); if (error) -@@ -365,6 +370,8 @@ +@@ -365,6 +370,8 @@ int suspend_devices_and_enter(suspend_st Close: if (suspend_ops->end) suspend_ops->end(); @@ -148104,7 +148104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return error; Recover_platform: -@@ -427,6 +434,8 @@ +@@ -427,6 +434,8 @@ static int enter_state(suspend_state_t s return -EBUSY; printk(KERN_INFO "PM: Syncing filesystems ... "); @@ -148127,7 +148127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * Architectures can override it: -@@ -67,6 +70,12 @@ +@@ -67,6 +70,12 @@ int console_printk[4] = { int oops_in_progress; EXPORT_SYMBOL(oops_in_progress); @@ -148140,7 +148140,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * console_sem protects the console_drivers list, and also * provides serialisation for access to the entire console -@@ -667,8 +676,39 @@ +@@ -667,8 +676,39 @@ asmlinkage int vprintk(const char *fmt, /* Emit the output into the temporary buffer */ printed_len += vscnprintf(printk_buf + printed_len, sizeof(printk_buf) - printed_len, fmt, args); @@ -148184,7 +148184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * appropriate log level tags, we insert them here --- a/kernel/timer.c +++ b/kernel/timer.c -@@ -813,7 +813,11 @@ +@@ -813,7 +813,11 @@ static int cascade(struct tvec_base *bas * don't have to detach them individually. */ list_for_each_entry_safe(timer, tmp, &tv_list, entry) { @@ -148199,7 +148199,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -1705,6 +1705,20 @@ +@@ -1705,6 +1705,20 @@ FILE LOCKING (flock() and fcntl()/lockf( P: Matthew Wilcox M: matthew@wil.cx L: linux-fsdevel@vger.kernel.org @@ -148902,7 +148902,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/mm/Makefile +++ b/mm/Makefile -@@ -22,6 +22,7 @@ +@@ -22,6 +22,7 @@ obj-$(CONFIG_NUMA) += mempolicy.o obj-$(CONFIG_SPARSEMEM) += sparse.o obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o obj-$(CONFIG_SHMEM) += shmem.o @@ -148912,7 +148912,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_SLOB) += slob.o --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c -@@ -97,6 +97,22 @@ +@@ -97,6 +97,22 @@ put_memory: } EXPORT_SYMBOL_GPL(shmem_file_setup); @@ -148935,7 +148935,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * shmem_zero_setup - setup a shared anonymous mapping * @vma: the vma to be mmapped is prepared by do_mmap_pgoff -@@ -110,10 +126,8 @@ +@@ -110,10 +126,8 @@ int shmem_zero_setup(struct vm_area_stru if (IS_ERR(file)) return PTR_ERR(file); @@ -148971,7 +148971,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/scripts/mkuboot.sh +++ b/scripts/mkuboot.sh -@@ -11,7 +11,7 @@ +@@ -11,7 +11,7 @@ if [ -z "${MKIMAGE}" ]; then if [ -z "${MKIMAGE}" ]; then # Doesn't exist echo '"mkimage" command not found - U-Boot images will not be built' >&2 @@ -148982,7 +148982,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c -@@ -1584,6 +1584,9 @@ +@@ -1584,6 +1584,9 @@ static int wm8753_init(struct snd_soc_de schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(caps_charge)); @@ -148992,7 +148992,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* set the update bits */ reg = wm8753_read_reg_cache(codec, WM8753_LDAC); wm8753_write(codec, WM8753_LDAC, reg | 0x0100); -@@ -1644,17 +1647,20 @@ +@@ -1644,17 +1647,20 @@ static int wm8753_i2c_probe(struct i2c_c struct snd_soc_codec *codec = socdev->codec; int ret; @@ -149015,7 +149015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { struct snd_soc_codec *codec = i2c_get_clientdata(client); kfree(codec->reg_cache); -@@ -1675,6 +1681,7 @@ +@@ -1675,6 +1681,7 @@ static struct i2c_driver wm8753_i2c_driv .probe = wm8753_i2c_probe, .remove = wm8753_i2c_remove, .id_table = wm8753_i2c_id, @@ -149023,7 +149023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static int wm8753_add_i2c_device(struct platform_device *pdev, -@@ -1716,6 +1723,8 @@ +@@ -1716,6 +1723,8 @@ err_driver: i2c_del_driver(&wm8753_i2c_driver); return -ENODEV; } @@ -149032,7 +149032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif #if defined(CONFIG_SPI_MASTER) -@@ -1783,7 +1792,7 @@ +@@ -1783,7 +1792,7 @@ static int wm8753_probe(struct platform_ struct wm8753_priv *wm8753; int ret = 0; @@ -149041,7 +149041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 setup = socdev->codec_data; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); -@@ -1820,6 +1829,7 @@ +@@ -1820,6 +1829,7 @@ static int wm8753_probe(struct platform_ #endif if (ret != 0) { @@ -149049,7 +149049,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 kfree(codec->private_data); kfree(codec); } -@@ -1857,7 +1867,6 @@ +@@ -1857,7 +1867,6 @@ static int wm8753_remove(struct platform snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) @@ -149059,7 +149059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #if defined(CONFIG_SPI_MASTER) --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig -@@ -26,6 +26,15 @@ +@@ -26,6 +26,15 @@ config SND_S3C24XX_SOC_NEO1973_WM8753 Say Y if you want to add support for SoC audio on smdk2440 with the WM8753. @@ -149077,7 +149077,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on SND_S3C24XX_SOC && MACH_SMDK2443 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile -@@ -13,7 +13,10 @@ +@@ -13,7 +13,10 @@ obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o @@ -149775,7 +149775,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <asm/plat-s3c24xx/regs-iis.h> #include "../codecs/wm8753.h" -@@ -585,7 +585,7 @@ +@@ -585,7 +585,7 @@ static struct snd_soc_machine neo1973 = .num_links = ARRAY_SIZE(neo1973_dai), }; @@ -149784,7 +149784,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .i2c_bus = 0, .i2c_address = 0x1a, }; -@@ -594,7 +594,7 @@ +@@ -594,7 +594,7 @@ static struct snd_soc_device neo1973_snd .machine = &neo1973, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_wm8753, @@ -149793,7 +149793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static int lm4857_i2c_probe(struct i2c_client *client, -@@ -676,7 +676,7 @@ +@@ -676,7 +676,7 @@ static int __init neo1973_init(void) { int ret; @@ -149815,7 +149815,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include <mach/audio.h> --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c -@@ -175,7 +175,7 @@ +@@ -175,7 +175,7 @@ static void s3c24xx_snd_rxctrl(int on) static int s3c24xx_snd_lrsync(void) { u32 iiscon; @@ -149824,7 +149824,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 DBG("Entered %s\n", __func__); -@@ -282,11 +282,14 @@ +@@ -282,11 +282,14 @@ static int s3c24xx_i2s_trigger(struct sn case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: @@ -149844,7 +149844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) s3c24xx_snd_rxctrl(1); -@@ -306,7 +309,6 @@ +@@ -306,7 +309,6 @@ static int s3c24xx_i2s_trigger(struct sn break; } @@ -149854,7 +149854,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c -@@ -168,7 +168,7 @@ +@@ -168,7 +168,7 @@ static int s3c24xx_pcm_hw_params(struct prtd->params->client, NULL); if (ret < 0) { @@ -149865,7 +149865,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c -@@ -1003,6 +1003,38 @@ +@@ -1003,6 +1003,38 @@ static ssize_t codec_reg_show(struct dev } static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); @@ -149904,7 +149904,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * snd_soc_new_ac97_codec - initailise AC97 device * @codec: audio codec -@@ -1218,6 +1250,9 @@ +@@ -1218,6 +1250,9 @@ int snd_soc_register_card(struct snd_soc mutex_unlock(&codec->mutex); @@ -149916,7 +149916,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c -@@ -1525,6 +1525,56 @@ +@@ -1525,6 +1525,56 @@ int snd_soc_dapm_get_pin_status(struct s EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status); /** diff --git a/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch b/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch index 12204c847..ac51ce3d6 100644 --- a/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch +++ b/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch @@ -15,8 +15,6 @@ gets rid of the regulator related backtrace seen upon resume. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> --- -diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c -index 422dea2..889f191 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -18,7 +18,6 @@ @@ -50,11 +48,9 @@ index 422dea2..889f191 100644 }; /* s3c_pm_init -diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c -index 343f43e..d284200 100644 --- a/drivers/regulator/pcf50633-regulator.c +++ b/drivers/regulator/pcf50633-regulator.c -@@ -249,8 +249,6 @@ struct regulator_ops pcf50633_regulator_ops = { +@@ -249,8 +249,6 @@ struct regulator_ops pcf50633_regulator_ .enable = pcf50633_regulator_enable, .disable = pcf50633_regulator_disable, .is_enabled = pcf50633_regulator_is_enabled, diff --git a/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch b/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch index 6beff0d7b..01eddb7cf 100644 --- a/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch +++ b/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch @@ -1,8 +1,6 @@ -diff --git a/drivers/video/display/jbt6k74.c b/drivers/video/display/jbt6k74.c -index a1d48dd..2ca1bd4 100644 --- a/drivers/video/display/jbt6k74.c +++ b/drivers/video/display/jbt6k74.c -@@ -443,8 +443,17 @@ int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state) +@@ -443,8 +443,17 @@ int jbt6k74_enter_state(struct jbt_info break; } @@ -21,7 +19,7 @@ index a1d48dd..2ca1bd4 100644 return rc; } -@@ -595,7 +604,14 @@ static int fb_notifier_callback(struct notifier_block *self, +@@ -595,7 +604,14 @@ static int fb_notifier_callback(struct n switch (fb_blank) { case FB_BLANK_UNBLANK: dev_info(&jbt->spi_dev->dev, "**** jbt6k74 unblank\n"); @@ -37,7 +35,7 @@ index a1d48dd..2ca1bd4 100644 break; case FB_BLANK_NORMAL: dev_info(&jbt->spi_dev->dev, "**** jbt6k74 normal\n"); -@@ -720,8 +736,6 @@ static int jbt_suspend(struct spi_device *spi, pm_message_t state) +@@ -720,8 +736,6 @@ static int jbt_suspend(struct spi_device { struct jbt_info *jbt = dev_get_drvdata(&spi->dev); |