diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/aruba-2.6/config/default | 2 | ||||
| -rw-r--r-- | target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c | 2 | ||||
| -rw-r--r-- | target/linux/aruba-2.6/patches/000-aruba.patch | 9159 | ||||
| -rw-r--r-- | target/linux/generic-2.6/config-template | 3 |
4 files changed, 9119 insertions, 47 deletions
diff --git a/target/linux/aruba-2.6/config/default b/target/linux/aruba-2.6/config/default index a15c7340f..2b14b56ae 100644 --- a/target/linux/aruba-2.6/config/default +++ b/target/linux/aruba-2.6/config/default @@ -167,7 +167,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PCMCIA_ATMEL is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_RTC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y diff --git a/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c b/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c index de966c869..ef5e52aa0 100644 --- a/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c +++ b/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c @@ -4,6 +4,8 @@ #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/fs.h> +#include <linux/jiffies.h> +#include <linux/timer.h> #include <asm/io.h> #include <asm/uaccess.h> diff --git a/target/linux/aruba-2.6/patches/000-aruba.patch b/target/linux/aruba-2.6/patches/000-aruba.patch index 7317685c5..804bf2f22 100644 --- a/target/linux/aruba-2.6/patches/000-aruba.patch +++ b/target/linux/aruba-2.6/patches/000-aruba.patch @@ -1,9 +1,9 @@ -diff -Nur linux-2.6.17/arch/mips/Kconfig linux-2.6.17-owrt/arch/mips/Kconfig ---- linux-2.6.17/arch/mips/Kconfig 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/arch/mips/Kconfig 2006-06-18 12:44:28.000000000 +0200 -@@ -227,6 +227,17 @@ - either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build - a kernel for this platform. +diff -Nur linux-2.6.21.1/arch/mips/Kconfig linux-2.6.21.1-owrt/arch/mips/Kconfig +--- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/mips/Kconfig 2007-05-23 23:34:01.000000000 +0200 +@@ -220,6 +220,17 @@ + <http://www.marvell.com/>. Say Y here if you wish to build a + kernel for this platform. +config MACH_ARUBA + bool "Support for the ARUBA product line" @@ -19,10 +19,10 @@ diff -Nur linux-2.6.17/arch/mips/Kconfig linux-2.6.17-owrt/arch/mips/Kconfig config MACH_JAZZ bool "Jazz family of machines" select ARC -diff -Nur linux-2.6.17/arch/mips/Makefile linux-2.6.17-owrt/arch/mips/Makefile ---- linux-2.6.17/arch/mips/Makefile 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/arch/mips/Makefile 2006-06-18 12:44:28.000000000 +0200 -@@ -145,6 +145,14 @@ +diff -Nur linux-2.6.21.1/arch/mips/Makefile linux-2.6.21.1-owrt/arch/mips/Makefile +--- linux-2.6.21.1/arch/mips/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/mips/Makefile 2007-05-23 23:34:01.000000000 +0200 +@@ -158,6 +158,14 @@ # # @@ -37,13 +37,666 @@ diff -Nur linux-2.6.17/arch/mips/Makefile linux-2.6.17-owrt/arch/mips/Makefile # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig ---- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/drivers/net/Kconfig 2006-06-18 12:44:28.000000000 +0200 -@@ -187,6 +187,13 @@ +diff -Nur linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-owrt/arch/mips/pci/Makefile +--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/mips/pci/Makefile 2007-05-23 23:36:48.000000000 +0200 +@@ -53,3 +53,4 @@ + obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o + obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o ++obj-$(CONFIG_MACH_ARUBA) += fixup-aruba.o ops-aruba.o pci-aruba.o +diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile +--- linux-2.6.21.1/drivers/char/watchdog/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile 2007-05-23 23:36:53.000000000 +0200 +@@ -82,5 +82,8 @@ + + # SPARC64 Architecture + ++# Aruba Architecture ++obj-$(CONFIG_MACH_ARUBA) += wdt_merlot.o ++ + # Architecture Independant + obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o +diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile.orig linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig +--- linux-2.6.21.1/drivers/char/watchdog/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,86 @@ ++# ++# Makefile for the WatchDog device drivers. ++# ++ ++# Only one watchdog can succeed. We probe the ISA/PCI/USB based ++# watchdog-cards first, then the architecture specific watchdog ++# drivers and then the architecture independant "softdog" driver. ++# This means that if your ISA/PCI/USB card isn't detected that ++# you can fall back to an architecture specific driver and if ++# that also fails then you can fall back to the software watchdog ++# to give you some cover. ++ ++# ISA-based Watchdog Cards ++obj-$(CONFIG_PCWATCHDOG) += pcwd.o ++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o ++obj-$(CONFIG_WDT) += wdt.o ++ ++# PCI-based Watchdog Cards ++obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o ++obj-$(CONFIG_WDTPCI) += wdt_pci.o ++ ++# USB-based Watchdog Cards ++obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o ++ ++# ARM Architecture ++obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o ++obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o ++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o ++obj-$(CONFIG_977_WATCHDOG) += wdt977.o ++obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o ++obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o ++obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o ++obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o ++obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o ++obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o ++obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o ++ ++# X86 (i386 + ia64 + x86_64) Architecture ++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o ++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o ++obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o ++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o ++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o ++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o ++obj-$(CONFIG_IB700_WDT) += ib700wdt.o ++obj-$(CONFIG_IBMASR) += ibmasr.o ++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o ++obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o ++obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o ++obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o ++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o ++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o ++obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o ++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o ++obj-$(CONFIG_SBC8360_WDT) += sbc8360.o ++obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o ++obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o ++obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o ++obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o ++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o ++obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o ++obj-$(CONFIG_MACHZ_WDT) += machzwd.o ++obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o ++ ++# PowerPC Architecture ++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o ++obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o ++obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o ++obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o ++ ++# PPC64 Architecture ++obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o ++ ++# MIPS Architecture ++obj-$(CONFIG_INDYDOG) += indydog.o ++obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o ++ ++# S390 Architecture ++ ++# SUPERH Architecture ++obj-$(CONFIG_SH_WDT) += shwdt.o ++ ++# SPARC64 Architecture ++ ++# Architecture Independant ++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o +diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c +--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c 2007-05-23 23:36:42.000000000 +0200 +@@ -25,6 +25,74 @@ + static void print_cfi_ident(struct cfi_ident *); + #endif + ++#if 1 ++ ++#define AMD_AUTOSEL_OFF1 0xAAA ++#define AMD_AUTOSEL_OFF2 0x555 ++#define AMD_MANUF_ID 0x1 ++#define AMD_DEVICE_ID1 0xF6 /* T */ ++#define AMD_DEVICE_ID2 0xF9 /* B */ ++/* Foll. are definitions for Macronix Flash Part */ ++#define MCX_MANUF_ID 0xC2 ++#define MCX_DEVICE_ID1 0xA7 ++#define MCX_DEVICE_ID2 0xA8 ++/* Foll. common to both AMD and Macronix */ ++#define FACTORY_LOCKED 0x99 ++#define USER_LOCKED 0x19 ++ ++/* NOTE: AP-70/6x use BYTE mode flash access. Therefore the ++ * lowest Addr. pin in the flash is not A0 but A-1 (A minus 1). ++ * CPU's A0 is tied to Flash's A-1, A1 to A0 and so on. This ++ * gives 4MB of byte-addressable mem. In byte mode, all addr ++ * need to be multiplied by 2 (i.e compared to word mode). ++ * NOTE: AMD_AUTOSEL_OFF1 and OFF2 are already mult. by 2 ++ * Just blindly use the addr offsets suggested in the manual ++ * for byte mode and you'll be OK. Offs. in Table 6 need to ++ * be mult by 2 (for getting autosel params) ++ */ ++void ++flash_detect(struct map_info *map, __u32 base, struct cfi_private *cfi) ++{ ++ map_word val[3]; ++ int osf = cfi->interleave * cfi->device_type; // =2 for AP70/6x ++ char *manuf, *part, *lock ; ++ ++ if (osf != 1) return ; ++ ++ cfi_send_gen_cmd(0xAA, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, AMD_AUTOSEL_OFF2, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x90, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL); ++ val[0] = map_read(map, base) ; // manuf ID ++ val[1] = map_read(map, base+2) ; // device ID ++ val[2] = map_read(map, base+6) ; // lock indicator ++#if 0 ++printk("v1=0x%x v2=0x%x v3=0x%x\n", val[0], val[1], val[2]) ; ++#endif ++ if (val[0].x[0] == AMD_MANUF_ID) { ++ manuf = "AMD Flash" ; ++ if (val[1].x[0] == AMD_DEVICE_ID1) ++ part = "AM29LV320D (Top)" ; ++ else if (val[1].x[0] == AMD_DEVICE_ID2) ++ part = "AM29LV320D (Bot)" ; ++ else part = "Unknown" ; ++ } else if (val[0].x[0] == MCX_MANUF_ID) { ++ manuf = "Macronix Flash" ; ++ if (val[1].x[0] == MCX_DEVICE_ID1) ++ part = "MX29LV320A (Top)" ; ++ else if (val[1].x[0] == MCX_DEVICE_ID2) ++ part = "MX29LV320A (Bot)" ; ++ else part = "Unknown" ; ++ } else ++ return ; ++ if (val[2].x[0] == FACTORY_LOCKED) ++ lock = "Factory Locked" ; ++ else if (val[2].x[0] == USER_LOCKED) ++ lock = "User Locked" ; ++ else lock = "Unknown locking" ; ++ printk("%s %s (%s)\n", manuf, part, lock) ; ++} ++#endif ++ + static int cfi_probe_chip(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi); + static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi); +@@ -117,6 +185,10 @@ + } + + xip_disable(); ++#if 1 ++ //cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); ++ flash_detect(map, base, cfi) ; ++#endif + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); +diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig +--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,444 @@ ++/* ++ Common Flash Interface probe code. ++ (C) 2000 Red Hat. GPL'd. ++ $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $ ++*/ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <asm/io.h> ++#include <asm/byteorder.h> ++#include <linux/errno.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++ ++#include <linux/mtd/xip.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/cfi.h> ++#include <linux/mtd/gen_probe.h> ++ ++//#define DEBUG_CFI ++ ++#ifdef DEBUG_CFI ++static void print_cfi_ident(struct cfi_ident *); ++#endif ++ ++static int cfi_probe_chip(struct map_info *map, __u32 base, ++ unsigned long *chip_map, struct cfi_private *cfi); ++static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi); ++ ++struct mtd_info *cfi_probe(struct map_info *map); ++ ++#ifdef CONFIG_MTD_XIP ++ ++/* only needed for short periods, so this is rather simple */ ++#define xip_disable() local_irq_disable() ++ ++#define xip_allowed(base, map) \ ++do { \ ++ (void) map_read(map, base); \ ++ asm volatile (".rep 8; nop; .endr"); \ ++ local_irq_enable(); \ ++} while (0) ++ ++#define xip_enable(base, map, cfi) \ ++do { \ ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \ ++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \ ++ xip_allowed(base, map); \ ++} while (0) ++ ++#define xip_disable_qry(base, map, cfi) \ ++do { \ ++ xip_disable(); \ ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \ ++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \ ++ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \ ++} while (0) ++ ++#else ++ ++#define xip_disable() do { } while (0) ++#define xip_allowed(base, map) do { } while (0) ++#define xip_enable(base, map, cfi) do { } while (0) ++#define xip_disable_qry(base, map, cfi) do { } while (0) ++ ++#endif ++ ++/* check for QRY. ++ in: interleave,type,mode ++ ret: table index, <0 for error ++ */ ++static int __xipram qry_present(struct map_info *map, __u32 base, ++ struct cfi_private *cfi) ++{ ++ int osf = cfi->interleave * cfi->device_type; // scale factor ++ map_word val[3]; ++ map_word qry[3]; ++ ++ qry[0] = cfi_build_cmd('Q', map, cfi); ++ qry[1] = cfi_build_cmd('R', map, cfi); ++ qry[2] = cfi_build_cmd('Y', map, cfi); ++ ++ val[0] = map_read(map, base + osf*0x10); ++ val[1] = map_read(map, base + osf*0x11); ++ val[2] = map_read(map, base + osf*0x12); ++ ++ if (!map_word_equal(map, qry[0], val[0])) ++ return 0; ++ ++ if (!map_word_equal(map, qry[1], val[1])) ++ return 0; ++ ++ if (!map_word_equal(map, qry[2], val[2])) ++ return 0; ++ ++ return 1; // "QRY" found ++} ++ ++static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, ++ unsigned long *chip_map, struct cfi_private *cfi) ++{ ++ int i; ++ ++ if ((base + 0) >= map->size) { ++ printk(KERN_NOTICE ++ "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n", ++ (unsigned long)base, map->size -1); ++ return 0; ++ } ++ if ((base + 0xff) >= map->size) { ++ printk(KERN_NOTICE ++ "Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n", ++ (unsigned long)base + 0x55, map->size -1); ++ return 0; ++ } ++ ++ xip_disable(); ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); ++ ++ if (!qry_present(map,base,cfi)) { ++ xip_enable(base, map, cfi); ++ return 0; ++ } ++ ++ if (!cfi->numchips) { ++ /* This is the first time we're called. Set up the CFI ++ stuff accordingly and return */ ++ return cfi_chip_setup(map, cfi); ++ } ++ ++ /* Check each previous chip to see if it's an alias */ ++ for (i=0; i < (base >> cfi->chipshift); i++) { ++ unsigned long start; ++ if(!test_bit(i, chip_map)) { ++ /* Skip location; no valid chip at this address */ ++ continue; ++ } ++ start = i << cfi->chipshift; ++ /* This chip should be in read mode if it's one ++ we've already touched. */ ++ if (qry_present(map, start, cfi)) { ++ /* Eep. This chip also had the QRY marker. ++ * Is it an alias for the new one? */ ++ cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL); ++ ++ /* If the QRY marker goes away, it's an alias */ ++ if (!qry_present(map, start, cfi)) { ++ xip_allowed(base, map); ++ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", ++ map->name, base, start); ++ return 0; ++ } ++ /* Yes, it's actually got QRY for data. Most ++ * unfortunate. Stick the new chip in read mode ++ * too and if it's the same, assume it's an alias. */ ++ /* FIXME: Use other modes to do a proper check */ ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL); ++ ++ if (qry_present(map, base, cfi)) { ++ xip_allowed(base, map); ++ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", ++ map->name, base, start); ++ return 0; ++ } ++ } ++ } ++ ++ /* OK, if we got to here, then none of the previous chips appear to ++ be aliases for the current one. */ ++ set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */ ++ cfi->numchips++; ++ ++ /* Put it back into Read Mode */ ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); ++ xip_allowed(base, map); ++ ++ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", ++ map->name, cfi->interleave, cfi->device_type*8, base, ++ map->bankwidth*8); ++ ++ return 1; ++} ++ ++static int __xipram cfi_chip_setup(struct map_info *map, ++ struct cfi_private *cfi) ++{ ++ int ofs_factor = cfi->interleave*cfi->device_type; ++ __u32 base = 0; ++ int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor); ++ int i; ++ ++ xip_enable(base, map, cfi); ++#ifdef DEBUG_CFI ++ printk("Number of erase regions: %d\n", num_erase_regions); ++#endif ++ if (!num_erase_regions) ++ return 0; ++ ++ cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); ++ if (!cfi->cfiq) { ++ printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); ++ return 0; ++ } ++ ++ memset(cfi->cfiq,0,sizeof(struct cfi_ident)); ++ ++ cfi->cfi_mode = CFI_MODE_CFI; ++ ++ /* Read the CFI info structure */ ++ xip_disable_qry(base, map, cfi); ++ for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++) ++ ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor); ++ ++ /* Note we put the device back into Read Mode BEFORE going into Auto ++ * Select Mode, as some devices support nesting of modes, others ++ * don't. This way should always work. ++ * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and ++ * so should be treated as nops or illegal (and so put the device ++ * back into Read Mode, which is a nop in this case). ++ */ ++ cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL); ++ cfi->mfr = cfi_read_query16(map, base); ++ cfi->id = cfi_read_query16(map, base + ofs_factor); ++ ++ /* Put it back into Read Mode */ ++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); ++ /* ... even if it's an Intel chip */ ++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); ++ xip_allowed(base, map); ++ ++ /* Do any necessary byteswapping */ ++ cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID); ++ ++ cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR); ++ cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID); ++ cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR); ++ cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc); ++ cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize); ++ ++#ifdef DEBUG_CFI ++ /* Dump the information therein */ ++ print_cfi_ident(cfi->cfiq); ++#endif ++ ++ for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { ++ cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]); ++ ++#ifdef DEBUG_CFI ++ printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n", ++ i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff, ++ (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1); ++#endif ++ } ++ ++ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", ++ map->name, cfi->interleave, cfi->device_type*8, base, ++ map->bankwidth*8); ++ ++ return 1; ++} ++ ++#ifdef DEBUG_CFI ++static char *vendorname(__u16 vendor) ++{ ++ switch (vendor) { ++ case P_ID_NONE: ++ return "None"; ++ ++ case P_ID_INTEL_EXT: ++ return "Intel/Sharp Extended"; ++ ++ case P_ID_AMD_STD: ++ return "AMD/Fujitsu Standard"; ++ ++ case P_ID_INTEL_STD: ++ return "Intel/Sharp Standard"; ++ ++ case P_ID_AMD_EXT: ++ return "AMD/Fujitsu Extended"; ++ ++ case P_ID_WINBOND: ++ return "Winbond Standard"; ++ ++ case P_ID_ST_ADV: ++ return "ST Advanced"; ++ ++ case P_ID_MITSUBISHI_STD: ++ return "Mitsubishi Standard"; ++ ++ case P_ID_MITSUBISHI_EXT: ++ return "Mitsubishi Extended"; ++ ++ case P_ID_SST_PAGE: ++ return "SST Page Write"; ++ ++ case P_ID_INTEL_PERFORMANCE: ++ return "Intel Performance Code"; ++ ++ case P_ID_INTEL_DATA: ++ return "Intel Data"; ++ ++ case P_ID_RESERVED: ++ return "Not Allowed / Reserved for Future Use"; ++ ++ default: ++ return "Unknown"; ++ } ++} ++ ++ ++static void print_cfi_ident(struct cfi_ident *cfip) ++{ ++#if 0 ++ if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') { ++ printk("Invalid CFI ident structure.\n"); ++ return; ++ } ++#endif ++ printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID)); ++ if (cfip->P_ADR) ++ printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR); ++ else ++ printk("No Primary Algorithm Table\n"); ++ ++ printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID)); ++ if (cfip->A_ADR) ++ printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR); ++ else ++ printk("No Alternate Algorithm Table\n"); ++ ++ ++ printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf); ++ printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf); ++ if (cfip->VppMin) { ++ printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf); ++ printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf); ++ } ++ else ++ printk("No Vpp line\n"); ++ ++ printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp); ++ printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp)); ++ ++ if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) { ++ printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp); ++ printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp)); ++ } ++ else ++ printk("Full buffer write not supported\n"); ++ ++ printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp); ++ printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp)); ++ if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) { ++ printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp); ++ printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp)); ++ } ++ else ++ printk("Chip erase not supported\n"); ++ ++ printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20)); ++ printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc); ++ switch(cfip->InterfaceDesc) { ++ case 0: ++ printk(" - x8-only asynchronous interface\n"); ++ break; ++ ++ case 1: ++ printk(" - x16-only asynchronous interface\n"); ++ break; ++ ++ case 2: ++ printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n"); ++ break; ++ ++ case 3: ++ printk(" - x32-only asynchronous interface\n"); ++ break; ++ ++ case 4: ++ printk(" - supports x16 and x32 via Word# with asynchronous interface\n"); ++ break; ++ ++ case 65535: ++ printk(" - Not Allowed / Reserved\n"); ++ break; ++ ++ default: ++ printk(" - Unknown\n"); ++ break; ++ } ++ ++ printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize); ++ printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions); ++ ++} ++#endif /* DEBUG_CFI */ ++ ++static struct chip_probe cfi_chip_probe = { ++ .name = "CFI", ++ .probe_chip = cfi_probe_chip ++}; ++ ++struct mtd_info *cfi_probe(struct map_info *map) ++{ ++ /* ++ * Just use the generic probe stuff to call our CFI-specific ++ * chip_probe routine in all the possible permutations, etc. ++ */ ++ return mtd_do_chip_probe(map, &cfi_chip_probe); ++} ++ ++static struct mtd_chip_driver cfi_chipdrv = { ++ .probe = cfi_probe, ++ .name = "cfi_probe", ++ .module = THIS_MODULE ++}; ++ ++static int __init cfi_probe_init(void) ++{ ++ register_mtd_chip_driver(&cfi_chipdrv); ++ return 0; ++} ++ ++static void __exit cfi_probe_exit(void) ++{ ++ unregister_mtd_chip_driver(&cfi_chipdrv); ++} ++ ++module_init(cfi_probe_init); ++module_exit(cfi_probe_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); ++MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips"); +diff -Nur linux-2.6.21.1/drivers/net/Kconfig linux-2.6.21.1-owrt/drivers/net/Kconfig +--- linux-2.6.21.1/drivers/net/Kconfig 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/net/Kconfig 2007-05-23 23:37:01.000000000 +0200 +@@ -201,6 +201,19 @@ source "drivers/net/arm/Kconfig" ++config AR2313 ++ tristate "AR2313 Ethernet support" ++ depends on NET_ETHERNET && MACH_ARUBA ++ help ++ Support for the AR2313 Ethernet part on Aruba AP60/61 ++ +config IDT_RC32434_ETH + tristate "IDT RC32434 Local Ethernet support" + depends on NET_ETHERNET @@ -54,23 +707,3212 @@ diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig config MACE tristate "MACE (Power Mac ethernet) support" depends on NET_ETHERNET && PPC_PMAC && PPC32 -diff -Nur linux-2.6.17/drivers/net/Makefile linux-2.6.17-owrt/drivers/net/Makefile ---- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/drivers/net/Makefile 2006-06-18 12:44:28.000000000 +0200 -@@ -38,6 +38,7 @@ +diff -Nur linux-2.6.21.1/drivers/net/Kconfig.orig linux-2.6.21.1-owrt/drivers/net/Kconfig.orig +--- linux-2.6.21.1/drivers/net/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/net/Kconfig.orig 2007-05-23 23:34:01.000000000 +0200 +@@ -0,0 +1,2952 @@ ++ ++# ++# Network device configuration ++# ++ ++menu "Network device support" ++ depends on NET ++ ++config NETDEVICES ++ default y if UML ++ bool "Network device support" ++ ---help--- ++ You can say N here if you don't intend to connect your Linux box to ++ any other computer at all. ++ ++ You'll have to say Y if your computer contains a network card that ++ you want to use under Linux. If you are going to run SLIP or PPP over ++ telephone line or null modem cable you need say Y here. Connecting ++ two machines with parallel ports using PLIP needs this, as well as ++ AX.25/KISS for sending Internet traffic over amateur radio links. ++ ++ See also "The Linux Network Administrator's Guide" by Olaf Kirch and ++ Terry Dawson. Available at <http://www.tldp.org/guides.html>. ++ ++ If unsure, say Y. ++ ++# All the following symbols are dependent on NETDEVICES - do not repeat ++# that for each of the symbols. ++if NETDEVICES ++ ++config IFB ++ tristate "Intermediate Functional Block support" ++ depends on NET_CLS_ACT ++ ---help--- ++ This is an intermediate driver that allows sharing of ++ resources. ++ To compile this driver as a module, choose M here: the module ++ will be called ifb. If you want to use more than one ifb ++ device at a time, you need to compile this driver as a module. ++ Instead of 'ifb', the devices will then be called 'ifb0', ++ 'ifb1' etc. ++ Look at the iproute2 documentation directory for usage etc ++ ++config DUMMY ++ tristate "Dummy net driver support" ++ ---help--- ++ This is essentially a bit-bucket device (i.e. traffic you send to ++ this device is consigned into oblivion) with a configurable IP ++ address. It is most commonly used in order to make your currently ++ inactive SLIP address seem like a real address for local programs. ++ If you use SLIP or PPP, you might want to say Y here. Since this ++ thing often comes in handy, the default is Y. It won't enlarge your ++ kernel either. What a deal. Read about it in the Network ++ Administrator's Guide, available from ++ <http://www.tldp.org/docs.html#guide>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called dummy. If you want to use more than one dummy ++ device at a time, you need to compile this driver as a module. ++ Instead of 'dummy', the devices will then be called 'dummy0', ++ 'dummy1' etc. ++ ++config BONDING ++ tristate "Bonding driver support" ++ depends on INET ++ ---help--- ++ Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet ++ Channels together. This is called 'Etherchannel' by Cisco, ++ 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. ++ ++ The driver supports multiple bonding modes to allow for both high ++ performance and high availability operation. ++ ++ Refer to <file:Documentation/networking/bonding.txt> for more ++ information. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called bonding. ++ ++config EQUALIZER ++ tristate "EQL (serial line load balancing) support" ++ ---help--- ++ If you have two serial connections to some other computer (this ++ usually requires two modems and two telephone lines) and you use ++ SLIP (the protocol for sending Internet traffic over telephone ++ lines) or PPP (a better SLIP) on them, you can make them behave like ++ one double speed connection using this driver. Naturally, this has ++ to be supported at the other end as well, either with a similar EQL ++ Linux driver or with a Livingston Portmaster 2e. ++ ++ Say Y if you want this and read ++ <file:Documentation/networking/eql.txt>. You may also want to read ++ section 6.2 of the NET-3-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called eql. If unsure, say N. ++ ++config TUN ++ tristate "Universal TUN/TAP device driver support" ++ select CRC32 ++ ---help--- ++ TUN/TAP provides packet reception and transmission for user space ++ programs. It can be viewed as a simple Point-to-Point or Ethernet ++ device, which instead of receiving packets from a physical media, ++ receives them from user space program and instead of sending packets ++ via physical media writes them to the user space program. ++ ++ When a program opens /dev/net/tun, driver creates and registers ++ corresponding net device tunX or tapX. After a program closed above ++ devices, driver will automatically delete tunXX or tapXX device and ++ all routes corresponding to it. ++ ++ Please read <file:Documentation/networking/tuntap.txt> for more ++ information. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called tun. ++ ++ If you don't know what to use this for, you don't need it. ++ ++config NET_SB1000 ++ tristate "General Instruments Surfboard 1000" ++ depends on PNP ++ ---help--- ++ This is a driver for the General Instrument (also known as ++ NextLevel) SURFboard 1000 internal ++ cable modem. This is an ISA card which is used by a number of cable ++ TV companies to provide cable modem access. It's a one-way ++ downstream-only cable modem, meaning that your upstream net link is ++ provided by your regular phone modem. ++ ++ At present this driver only compiles as a module, so say M here if ++ you have this card. The module will be called sb1000. Then read ++ <file:Documentation/networking/README.sb1000> for information on how ++ to use this module, as it needs special ppp scripts for establishing ++ a connection. Further documentation and the necessary scripts can be ++ found at: ++ ++ <http://www.jacksonville.net/~fventuri/> ++ <http://home.adelphia.net/~siglercm/sb1000.html> ++ <http://linuxpower.cx/~cable/> ++ ++ If you don't have this card, of course say N. ++ ++source "drivers/net/arcnet/Kconfig" ++ ++source "drivers/net/phy/Kconfig" ++ ++# ++# Ethernet ++# ++ ++menu "Ethernet (10 or 100Mbit)" ++ depends on !UML ++ ++config NET_ETHERNET ++ bool "Ethernet (10 or 100Mbit)" ++ ---help--- ++ Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common ++ type of Local Area Network (LAN) in universities and companies. ++ ++ Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over ++ coaxial cable, linking computers in a chain), 10BASE-T or twisted ++ pair (10 Mbps over twisted pair cable, linking computers to central ++ hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs), ++ 100BASE-TX (100 Mbps over two twisted pair cables, using hubs), ++ 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair ++ cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links) ++ [the 100BASE varieties are also known as Fast Ethernet], and Gigabit ++ Ethernet (1 Gbps over optical fiber or short copper links). ++ ++ If your Linux machine will be connected to an Ethernet and you have ++ an Ethernet network interface card (NIC) installed in your computer, ++ say Y here and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. You will then also have ++ to say Y to the driver for your particular NIC. ++ ++ Note that the answer to this question won't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about Ethernet network cards. If unsure, say N. ++ ++config MII ++ tristate "Generic Media Independent Interface device support" ++ depends on NET_ETHERNET ++ help ++ Most ethernet controllers have MII transceiver either as an external ++ or internal device. It is safe to say Y or M here even if your ++ ethernet card lack MII. ++ ++config MACB ++ tristate "Atmel MACB support" ++ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263) ++ select MII ++ help ++ The Atmel MACB ethernet interface is found on many AT32 and AT91 ++ parts. Say Y to include support for the MACB chip. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called macb. ++ ++source "drivers/net/arm/Kconfig" ++ ++config IDT_RC32434_ETH ++ tristate "IDT RC32434 Local Ethernet support" ++ depends on NET_ETHERNET ++ help ++ IDT RC32434 has one local ethernet port. Say Y here to enable it. ++ To compile this driver as a module, choose M here. ++ ++config MACE ++ tristate "MACE (Power Mac ethernet) support" ++ depends on NET_ETHERNET && PPC_PMAC && PPC32 ++ select CRC32 ++ help ++ Power Macintoshes and clones with Ethernet built-in on the ++ motherboard will usually use a MACE (Medium Access Control for ++ Ethernet) interface. Say Y to include support for the MACE chip. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called mace. ++ ++config MACE_AAUI_PORT ++ bool "Use AAUI port instead of TP by default" ++ depends on MACE ++ help ++ Some Apple machines (notably the Apple Network Server) which use the ++ MACE ethernet chip have an Apple AUI port (small 15-pin connector), ++ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say ++ Y here if you have such a machine. If unsure, say N. ++ The driver will default to AAUI on ANS anyway, and if you use it as ++ a module, you can provide the port_aaui=0|1 to force the driver. ++ ++config BMAC ++ tristate "BMAC (G3 ethernet) support" ++ depends on NET_ETHERNET && PPC_PMAC && PPC32 ++ select CRC32 ++ help ++ Say Y for support of BMAC Ethernet interfaces. These are used on G3 ++ computers. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called bmac. ++ ++config ARIADNE ++ tristate "Ariadne support" ++ depends on NET_ETHERNET && ZORRO ++ help ++ If you have a Village Tronic Ariadne Ethernet adapter, say Y. ++ Otherwise, say N. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called ariadne. ++ ++config A2065 ++ tristate "A2065 support" ++ depends on NET_ETHERNET && ZORRO ++ select CRC32 ++ help ++ If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, ++ say N. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called a2065. ++ ++config HYDRA ++ tristate "Hydra support" ++ depends on NET_ETHERNET && ZORRO ++ select CRC32 ++ help ++ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called hydra. ++ ++config ZORRO8390 ++ tristate "Zorro NS8390-based Ethernet support" ++ depends on NET_ETHERNET && ZORRO ++ select CRC32 ++ help ++ This driver is for Zorro Ethernet cards using an NS8390-compatible ++ chipset, like the Village Tronic Ariadne II and the Individual ++ Computers X-Surf Ethernet cards. If you have such a card, say Y. ++ Otherwise, say N. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called zorro8390. ++ ++config APNE ++ tristate "PCMCIA NE2000 support" ++ depends on NET_ETHERNET && AMIGA_PCMCIA ++ select CRC32 ++ help ++ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, ++ say N. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called apne. ++ ++config APOLLO_ELPLUS ++ tristate "Apollo 3c505 support" ++ depends on NET_ETHERNET && APOLLO ++ help ++ Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card. ++ If you don't have one made for Apollos, you can use one from a PC, ++ except that your Apollo won't be able to boot from it (because the ++ code in the ROM will be for a PC). ++ ++config MAC8390 ++ bool "Macintosh NS 8390 based ethernet cards" ++ depends on NET_ETHERNET && MAC ++ select CRC32 ++ help ++ If you want to include a driver to support Nubus or LC-PDS ++ Ethernet cards using an NS8390 chipset or its equivalent, say Y ++ and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++config MAC89x0 ++ tristate "Macintosh CS89x0 based ethernet cards" ++ depends on NET_ETHERNET && MAC && BROKEN ++ ---help--- ++ Support for CS89x0 chipset based Ethernet cards. If you have a ++ Nubus or LC-PDS network (Ethernet) card of this type, say Y and ++ read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. This module will ++ be called mac89x0. ++ ++config MACSONIC ++ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" ++ depends on NET_ETHERNET && MAC ++ ---help--- ++ Support for NatSemi SONIC based Ethernet devices. This includes ++ the onboard Ethernet in many Quadras as well as some LC-PDS, ++ a few Nubus and all known Comm Slot Ethernet cards. If you have ++ one of these say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. This module will ++ be called macsonic. ++ ++config MACMACE ++ bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)" ++ depends on NET_ETHERNET && MAC && EXPERIMENTAL ++ select CRC32 ++ help ++ Support for the onboard AMD 79C940 MACE Ethernet controller used in ++ the 660AV and 840AV Macintosh. If you have one of these Macintoshes ++ say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++config MVME147_NET ++ tristate "MVME147 (Lance) Ethernet support" ++ depends on NET_ETHERNET && MVME147 ++ select CRC32 ++ help ++ Support for the on-board Ethernet interface on the Motorola MVME147 ++ single-board computer. Say Y here to include the ++ driver for this chip in your kernel. ++ To compile this driver as a module, choose M here. ++ ++config MVME16x_NET ++ tristate "MVME16x Ethernet support" ++ depends on NET_ETHERNET && MVME16x ++ help ++ This is the driver for the Ethernet interface on the Motorola ++ MVME162, 166, 167, 172 and 177 boards. Say Y here to include the ++ driver for this chip in your kernel. ++ To compile this driver as a module, choose M here. ++ ++config BVME6000_NET ++ tristate "BVME6000 Ethernet support" ++ depends on NET_ETHERNET && BVME6000 ++ help ++ This is the driver for the Ethernet interface on BVME4000 and ++ BVME6000 VME boards. Say Y here to include the driver for this chip ++ in your kernel. ++ To compile this driver as a module, choose M here. ++ ++config ATARILANCE ++ tristate "Atari Lance support" ++ depends on NET_ETHERNET && ATARI ++ help ++ Say Y to include support for several Atari Ethernet adapters based ++ on the AMD Lance chipset: RieblCard (with or without battery), or ++ PAMCard VME (also the version by Rhotron, with different addresses). ++ ++config ATARI_BIONET ++ tristate "BioNet-100 support" ++ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN ++ help ++ Say Y to include support for BioData's BioNet-100 Ethernet adapter ++ for the ACSI port. The driver works (has to work...) with a polled ++ I/O scheme, so it's rather slow :-( ++ ++config ATARI_PAMSNET ++ tristate "PAMsNet support" ++ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN ++ help ++ Say Y to include support for the PAMsNet Ethernet adapter for the ++ ACSI port ("ACSI node"). The driver works (has to work...) with a ++ polled I/O scheme, so it's rather slow :-( ++ ++config SUN3LANCE ++ tristate "Sun3/Sun3x on-board LANCE support" ++ depends on NET_ETHERNET && (SUN3 || SUN3X) ++ help ++ Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) ++ featured an AMD Lance 10Mbit Ethernet controller on board; say Y ++ here to compile in the Linux driver for this and enable Ethernet. ++ General Linux information on the Sun 3 and 3x series (now ++ discontinued) is at ++ <http://www.angelfire.com/ca2/tech68k/sun3.html>. ++ ++ If you're not building a kernel for a Sun 3, say N. ++ ++config SUN3_82586 ++ bool "Sun3 on-board Intel 82586 support" ++ depends on NET_ETHERNET && SUN3 ++ help ++ This driver enables support for the on-board Intel 82586 based ++ Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note ++ that this driver does not support 82586-based adapters on additional ++ VME boards. ++ ++config HPLANCE ++ bool "HP on-board LANCE support" ++ depends on NET_ETHERNET && DIO ++ select CRC32 ++ help ++ If you want to use the builtin "LANCE" Ethernet controller on an ++ HP300 machine, say Y here. ++ ++config LASI_82596 ++ tristate "Lasi ethernet" ++ depends on NET_ETHERNET && GSC ++ help ++ Say Y here to support the builtin Intel 82596 ethernet controller ++ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. ++ ++config MIPS_JAZZ_SONIC ++ tristate "MIPS JAZZ onboard SONIC Ethernet support" ++ depends on NET_ETHERNET && MACH_JAZZ ++ help ++ This is the driver for the onboard card of MIPS Magnum 4000, ++ Acer PICA, Olivetti M700-10 and a few other identical OEM systems. ++ ++config MIPS_AU1X00_ENET ++ bool "MIPS AU1000 Ethernet support" ++ depends on NET_ETHERNET && SOC_AU1X00 ++ select PHYLIB ++ select CRC32 ++ help ++ If you have an Alchemy Semi AU1X00 based system ++ say Y. Otherwise, say N. ++ ++config NET_SB1250_MAC ++ tristate "SB1250 Ethernet support" ++ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC ++ ++config SGI_IOC3_ETH ++ bool "SGI IOC3 Ethernet" ++ depends on NET_ETHERNET && PCI && SGI_IP27 ++ select CRC32 ++ select MII ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++config SGI_IOC3_ETH_HW_RX_CSUM ++ bool "Receive hardware checksums" ++ depends on SGI_IOC3_ETH && INET ++ default y ++ help ++ The SGI IOC3 network adapter supports TCP and UDP checksums in ++ hardware to offload processing of these checksums from the CPU. At ++ the moment only acceleration of IPv4 is supported. This option ++ enables offloading for checksums on receive. If unsure, say Y. ++ ++config SGI_IOC3_ETH_HW_TX_CSUM ++ bool "Transmit hardware checksums" ++ depends on SGI_IOC3_ETH && INET ++ default y ++ help ++ The SGI IOC3 network adapter supports TCP and UDP checksums in ++ hardware to offload processing of these checksums from the CPU. At ++ the moment only acceleration of IPv4 is supported. This option ++ enables offloading for checksums on transmit. If unsure, say Y. ++ ++config MIPS_SIM_NET ++ tristate "MIPS simulator Network device (EXPERIMENTAL)" ++ depends on MIPS_SIM && EXPERIMENTAL ++ help ++ The MIPSNET device is a simple Ethernet network device which is ++ emulated by the MIPS Simulator. ++ If you are not using a MIPSsim or are unsure, say N. ++ ++config SGI_O2MACE_ETH ++ tristate "SGI O2 MACE Fast Ethernet support" ++ depends on NET_ETHERNET && SGI_IP32=y ++ ++config STNIC ++ tristate "National DP83902AV support" ++ depends on NET_ETHERNET && SUPERH ++ select CRC32 ++ help ++ Support for cards based on the National Semiconductor DP83902AV ++ ST-NIC Serial Network Interface Controller for Twisted Pair. This ++ is a 10Mbit/sec Ethernet controller. Product overview and specs at ++ <http://www.national.com/pf/DP/DP83902A.html>. ++ ++ If unsure, say N. ++ ++config SUNLANCE ++ tristate "Sun LANCE support" ++ depends on NET_ETHERNET && SBUS ++ select CRC32 ++ help ++ This driver supports the "le" interface present on all 32-bit Sparc ++ systems, on some older Ultra systems and as an Sbus option. These ++ cards are based on the AMD Lance chipset, which is better known ++ via the NE2100 cards. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sunlance. ++ ++config HAPPYMEAL ++ tristate "Sun Happy Meal 10/100baseT support" ++ depends on NET_ETHERNET && (SBUS || PCI) ++ select CRC32 ++ help ++ This driver supports the "hme" interface present on most Ultra ++ systems and as an option on older Sbus systems. This driver supports ++ both PCI and Sbus devices. This driver also supports the "qfe" quad ++ 100baseT device available in both PCI and Sbus configurations. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sunhme. ++ ++config SUNBMAC ++ tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)" ++ depends on NET_ETHERNET && SBUS && EXPERIMENTAL ++ select CRC32 ++ help ++ This driver supports the "be" interface available as an Sbus option. ++ This is Sun's older 100baseT Ethernet device. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sunbmac. ++ ++config SUNQE ++ tristate "Sun QuadEthernet support" ++ depends on NET_ETHERNET && SBUS ++ select CRC32 ++ help ++ This driver supports the "qe" 10baseT Ethernet device, available as ++ an Sbus option. Note that this is not the same as Quad FastEthernet ++ "qfe" which is supported by the Happy Meal driver instead. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sunqe. ++ ++config SUNGEM ++ tristate "Sun GEM support" ++ depends on NET_ETHERNET && PCI ++ select CRC32 ++ help ++ Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also ++ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>. ++ ++config CASSINI ++ tristate "Sun Cassini support" ++ depends on NET_ETHERNET && PCI ++ select CRC32 ++ help ++ Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also ++ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf> ++ ++config NET_VENDOR_3COM ++ bool "3COM cards" ++ depends on NET_ETHERNET && (ISA || EISA || MCA || PCI) ++ help ++ If you have a network (Ethernet) card belonging to this class, say Y ++ and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about 3COM cards. If you say Y, you will be asked for ++ your specific card in the following questions. ++ ++config EL1 ++ tristate "3c501 \"EtherLink\" support" ++ depends on NET_VENDOR_3COM && ISA ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Also, consider buying a ++ new card, since the 3c501 is slow, broken, and obsolete: you will ++ have problems. Some people suggest to ping ("man ping") a nearby ++ machine every minute ("man cron") when using this card. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c501. ++ ++config EL2 ++ tristate "3c503 \"EtherLink II\" support" ++ depends on NET_VENDOR_3COM && ISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c503. ++ ++config ELPLUS ++ tristate "3c505 \"EtherLink Plus\" support" ++ depends on NET_VENDOR_3COM && ISA && ISA_DMA_API ++ ---help--- ++ Information about this network (Ethernet) card can be found in ++ <file:Documentation/networking/3c505.txt>. If you have a card of ++ this type, say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c505. ++ ++config EL16 ++ tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" ++ depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c507. ++ ++config EL3 ++ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" ++ depends on NET_VENDOR_3COM && (ISA || EISA || MCA) ++ ---help--- ++ If you have a network (Ethernet) card belonging to the 3Com ++ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available ++ from <http://www.tldp.org/docs.html#howto>. ++ ++ If your card is not working you may need to use the DOS ++ setup disk to disable Plug & Play mode, and to select the default ++ media type. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c509. ++ ++config 3C515 ++ tristate "3c515 ISA \"Fast EtherLink\"" ++ depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API ++ help ++ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet ++ network card, say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c515. ++ ++config ELMC ++ tristate "3c523 \"EtherLink/MC\" support" ++ depends on NET_VENDOR_3COM && MCA_LEGACY ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c523. ++ ++config ELMC_II ++ tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" ++ depends on NET_VENDOR_3COM && MCA && MCA_LEGACY ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called 3c527. ++ ++config VORTEX ++ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" ++ depends on NET_VENDOR_3COM && (PCI || EISA) ++ select MII ++ ---help--- ++ This option enables driver support for a large number of 10Mbps and ++ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: ++ ++ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI ++ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI ++ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus ++ "Tornado" (3c905) PCI ++ "Hurricane" (3c555/3cSOHO) PCI ++ ++ If you have such a card, say Y and read the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. More ++ specific information is in ++ <file:Documentation/networking/vortex.txt> and in the comments at ++ the beginning of <file:drivers/net/3c59x.c>. ++ ++ To compile this support as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. ++ ++config TYPHOON ++ tristate "3cr990 series \"Typhoon\" support" ++ depends on NET_VENDOR_3COM && PCI ++ select CRC32 ++ ---help--- ++ This option enables driver support for the 3cr990 series of cards: ++ ++ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, ++ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, ++ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR ++ ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called typhoon. ++ ++config LANCE ++ tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" ++ depends on NET_ETHERNET && ISA && ISA_DMA_API ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are ++ of this type. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called lance. This is recommended. ++ ++config NET_VENDOR_SMC ++ bool "Western Digital/SMC cards" ++ depends on NET_ETHERNET && (ISA || MCA || EISA || MAC) ++ help ++ If you have a network (Ethernet) card belonging to this class, say Y ++ and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about Western Digital cards. If you say Y, you will be ++ asked for your specific card in the following questions. ++ ++config WD80x3 ++ tristate "WD80*3 support" ++ depends on NET_VENDOR_SMC && ISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called wd. ++ ++config ULTRAMCA ++ tristate "SMC Ultra MCA support" ++ depends on NET_VENDOR_SMC && MCA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type and are running ++ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called smc-mca. ++ ++config ULTRA ++ tristate "SMC Ultra support" ++ depends on NET_VENDOR_SMC && ISA ++ select CRC32 ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ Important: There have been many reports that, with some motherboards ++ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, ++ such as some BusLogic models) causes corruption problems with many ++ operating systems. The Linux smc-ultra driver has a work-around for ++ this but keep it in mind if you have such a SCSI card and have ++ problems. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called smc-ultra. ++ ++config ULTRA32 ++ tristate "SMC Ultra32 EISA support" ++ depends on NET_VENDOR_SMC && EISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called smc-ultra32. ++ ++config SMC91X ++ tristate "SMC 91C9x/91C1xxx support" ++ select CRC32 ++ select MII ++ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00) ++ help ++ This is a driver for SMC's 91x series of Ethernet chipsets, ++ including the SMC91C94 and the SMC91C111. Say Y if you want it ++ compiled into the kernel, and read the file ++ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, ++ available from <http://www.linuxdoc.org/docs.html#howto>. ++ ++ This driver is also available as a module ( = code which can be ++ inserted in and removed from the running kernel whenever you want). ++ The module will be called smc91x. If you want to compile it as a ++ module, say M here and read <file:Documentation/modules.txt> as well ++ as <file:Documentation/networking/net-modules.txt>. ++ ++config SMC9194 ++ tristate "SMC 9194 support" ++ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) ++ select CRC32 ++ ---help--- ++ This is support for the SMC9xxx based Ethernet cards. Choose this ++ option if you have a DELL laptop with the docking station, or ++ another SMC9192/9194 based chipset. Say Y if you want it compiled ++ into the kernel, and read the file ++ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called smc9194. ++ ++config NET_NETX ++ tristate "NetX Ethernet support" ++ select MII ++ depends on NET_ETHERNET && ARCH_NETX ++ help ++ This is support for the Hilscher netX builtin Ethernet ports ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called netx-eth. ++ ++config DM9000 ++ tristate "DM9000 support" ++ depends on (ARM || MIPS) && NET_ETHERNET ++ select CRC32 ++ select MII ++ ---help--- ++ Support for DM9000 chipset. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called dm9000. ++ ++config SMC911X ++ tristate "SMSC LAN911[5678] support" ++ select CRC32 ++ select MII ++ depends on NET_ETHERNET && ARCH_PXA ++ help ++ This is a driver for SMSC's LAN911x series of Ethernet chipsets ++ including the new LAN9115, LAN9116, LAN9117, and LAN9118. ++ Say Y if you want it compiled into the kernel, ++ and read the Ethernet-HOWTO, available from ++ <http://www.linuxdoc.org/docs.html#howto>. ++ ++ This driver is also available as a module. The module will be ++ called smc911x. If you want to compile it as a module, say M ++ here and read <file:Documentation/modules.txt> ++ ++config NET_VENDOR_RACAL ++ bool "Racal-Interlan (Micom) NI cards" ++ depends on NET_ETHERNET && ISA ++ help ++ If you have a network (Ethernet) card belonging to this class, such ++ as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about NI cards. If you say Y, you will be asked for ++ your specific card in the following questions. ++ ++config NI5010 ++ tristate "NI5010 support (EXPERIMENTAL)" ++ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Note that this is still ++ experimental code. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ni5010. ++ ++config NI52 ++ tristate "NI5210 support" ++ depends on NET_VENDOR_RACAL && ISA ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ni52. ++ ++config NI65 ++ tristate "NI6510 support" ++ depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ni65. ++ ++source "drivers/net/tulip/Kconfig" ++ ++config AT1700 ++ tristate "AT1700/1720 support (EXPERIMENTAL)" ++ depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL ++ select CRC32 ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called at1700. ++ ++config DEPCA ++ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" ++ depends on NET_ETHERNET && (ISA || EISA || MCA) ++ select CRC32 ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto> as well as ++ <file:drivers/net/depca.c>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called depca. ++ ++config HP100 ++ tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" ++ depends on NET_ETHERNET && (ISA || EISA || PCI) ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called hp100. ++ ++config NET_ISA ++ bool "Other ISA cards" ++ depends on NET_ETHERNET && ISA ++ ---help--- ++ If your network (Ethernet) card hasn't been mentioned yet and its ++ bus system (that's the way the cards talks to the other components ++ of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y. ++ Make sure you know the name of your card. Read the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. ++ ++ If unsure, say Y. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the remaining ISA network card questions. If you say Y, you will be ++ asked for your specific card in the following questions. ++ ++config E2100 ++ tristate "Cabletron E21xx support" ++ depends on NET_ISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called e2100. ++ ++config EWRK3 ++ tristate "EtherWORKS 3 (DE203, DE204, DE205) support" ++ depends on NET_ISA ++ select CRC32 ++ ---help--- ++ This driver supports the DE203, DE204 and DE205 network (Ethernet) ++ cards. If this is for you, say Y and read ++ <file:Documentation/networking/ewrk3.txt> in the kernel source as ++ well as the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ewrk3. ++ ++config EEXPRESS ++ tristate "EtherExpress 16 support" ++ depends on NET_ISA ++ ---help--- ++ If you have an EtherExpress16 network (Ethernet) card, say Y and ++ read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Note that the Intel ++ EtherExpress16 card used to be regarded as a very poor choice ++ because the driver was very unreliable. We now have a new driver ++ that should do better. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called eexpress. ++ ++config EEXPRESS_PRO ++ tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" ++ depends on NET_ISA ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y. This ++ driver supports Intel i82595{FX,TX} based boards. Note however ++ that the EtherExpress PRO/100 Ethernet card has its own separate ++ driver. Please read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called eepro. ++ ++config HPLAN_PLUS ++ tristate "HP PCLAN+ (27247B and 27252A) support" ++ depends on NET_ISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called hp-plus. ++ ++config HPLAN ++ tristate "HP PCLAN (27245 and other 27xxx series) support" ++ depends on NET_ISA ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called hp. ++ ++config LP486E ++ tristate "LP486E on board Ethernet" ++ depends on NET_ISA ++ help ++ Say Y here to support the 82596-based on-board Ethernet controller ++ for the Panther motherboard, which is one of the two shipped in the ++ Intel Professional Workstation. ++ ++config ETH16I ++ tristate "ICL EtherTeam 16i/32 support" ++ depends on NET_ISA ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called eth16i. ++ ++config NE2000 ++ tristate "NE2000/NE1000 support" ++ depends on NET_ISA || (Q40 && m) || M32R ++ select CRC32 ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards ++ without a specific driver are compatible with NE2000. ++ ++ If you have a PCI NE2000 card however, say N here and Y to "PCI ++ NE2000 and clone support" under "EISA, VLB, PCI and on board ++ controllers" below. If you have a NE2000 card and are running on ++ an MCA system (a bus system used on some IBM PS/2 computers and ++ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", ++ below. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ne. ++ ++config ZNET ++ tristate "Zenith Z-Note support (EXPERIMENTAL)" ++ depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API ++ help ++ The Zenith Z-Note notebook computer has a built-in network ++ (Ethernet) card, and this is the Linux driver for it. Note that the ++ IBM Thinkpad 300 is compatible with the Z-Note and is also supported ++ by this driver. Read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++config SEEQ8005 ++ tristate "SEEQ8005 support (EXPERIMENTAL)" ++ depends on NET_ISA && EXPERIMENTAL ++ help ++ This is a driver for the SEEQ 8005 network (Ethernet) card. If this ++ is for you, read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called seeq8005. ++ ++config NE2_MCA ++ tristate "NE/2 (ne2000 MCA version) support" ++ depends on NET_ETHERNET && MCA_LEGACY ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ne2. ++ ++config IBMLANA ++ tristate "IBM LAN Adapter/A support" ++ depends on NET_ETHERNET && MCA && MCA_LEGACY ++ ---help--- ++ This is a Micro Channel Ethernet adapter. You need to set ++ CONFIG_MCA to use this driver. It is both available as an in-kernel ++ driver and as a module. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The only ++ currently supported card is the IBM LAN Adapter/A for Ethernet. It ++ will both support 16K and 32K memory windows, however a 32K window ++ gives a better security against packet losses. Usage of multiple ++ boards with this driver should be possible, but has not been tested ++ up to now due to lack of hardware. ++ ++config IBMVETH ++ tristate "IBM LAN Virtual Ethernet support" ++ depends on NET_ETHERNET && PPC_PSERIES ++ ---help--- ++ This driver supports virtual ethernet adapters on newer IBM iSeries ++ and pSeries systems. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will ++ be called ibmveth. ++ ++config IBM_EMAC ++ tristate "PowerPC 4xx on-chip Ethernet support" ++ depends on 4xx ++ help ++ This driver supports the PowerPC 4xx EMAC family of on-chip ++ Ethernet controllers. ++ ++config IBM_EMAC_RXB ++ int "Number of receive buffers" ++ depends on IBM_EMAC ++ default "128" ++ ++config IBM_EMAC_TXB ++ int "Number of transmit buffers" ++ depends on IBM_EMAC ++ default "64" ++ ++config IBM_EMAC_POLL_WEIGHT ++ int "MAL NAPI polling weight" ++ depends on IBM_EMAC ++ default "32" ++ ++config IBM_EMAC_RX_COPY_THRESHOLD ++ int "RX skb copy threshold (bytes)" ++ depends on IBM_EMAC ++ default "256" ++ ++config IBM_EMAC_RX_SKB_HEADROOM ++ int "Additional RX skb headroom (bytes)" ++ depends on IBM_EMAC ++ default "0" ++ help ++ Additional receive skb headroom. Note, that driver ++ will always reserve at least 2 bytes to make IP header ++ aligned, so usually there is no need to add any additional ++ headroom. ++ ++ If unsure, set to 0. ++ ++config IBM_EMAC_PHY_RX_CLK_FIX ++ bool "PHY Rx clock workaround" ++ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) ++ help ++ Enable this if EMAC attached to a PHY which doesn't generate ++ RX clock if there is no link, if this is the case, you will ++ see "TX disable timeout" or "RX disable timeout" in the system ++ log. ++ ++ If unsure, say N. ++ ++config IBM_EMAC_DEBUG ++ bool "Debugging" ++ depends on IBM_EMAC ++ default n ++ ++config IBM_EMAC_ZMII ++ bool ++ depends on IBM_EMAC && (NP405H || NP405L || 44x) ++ default y ++ ++config IBM_EMAC_RGMII ++ bool ++ depends on IBM_EMAC && 440GX ++ default y ++ ++config IBM_EMAC_TAH ++ bool ++ depends on IBM_EMAC && 440GX ++ default y ++ ++config NET_PCI ++ bool "EISA, VLB, PCI and on board controllers" ++ depends on NET_ETHERNET && (ISA || EISA || PCI) ++ help ++ This is another class of network cards which attach directly to the ++ bus. If you have one of those, say Y and read the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about this class of network cards. If you say Y, you ++ will be asked for your specific card in the following questions. If ++ you are unsure, say Y. ++ ++config PCNET32 ++ tristate "AMD PCnet32 PCI support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ If you have a PCnet32 or PCnetPCI based network (Ethernet) card, ++ answer Y here and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called pcnet32. ++ ++config PCNET32_NAPI ++ bool "Use RX polling (NAPI)" ++ depends on PCNET32 ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config AMD8111_ETH ++ tristate "AMD 8111 (new PCI lance) support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ If you have an AMD 8111-based PCI lance ethernet card, ++ answer Y here and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called amd8111e. ++config AMD8111E_NAPI ++ bool "Enable NAPI support" ++ depends on AMD8111_ETH ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config ADAPTEC_STARFIRE ++ tristate "Adaptec Starfire/DuraLAN support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network ++ adapter. The DuraLAN chip is used on the 64 bit PCI boards from ++ Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip ++ driver. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called starfire. This is recommended. ++ ++config ADAPTEC_STARFIRE_NAPI ++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" ++ depends on ADAPTEC_STARFIRE && EXPERIMENTAL ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config AC3200 ++ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" ++ depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ac3200. ++ ++config APRICOT ++ tristate "Apricot Xen-II on board Ethernet" ++ depends on NET_PCI && ISA ++ help ++ If you have a network (Ethernet) controller of this type, say Y and ++ read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called apricot. ++ ++config B44 ++ tristate "Broadcom 4400 ethernet support" ++ depends on NET_PCI && PCI ++ select MII ++ help ++ If you have a network (Ethernet) controller of this type, say Y and ++ read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called b44. ++ ++config FORCEDETH ++ tristate "nForce Ethernet support" ++ depends on NET_PCI && PCI ++ help ++ If you have a network (Ethernet) controller of this type, say Y and ++ read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called forcedeth. ++ ++config FORCEDETH_NAPI ++ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" ++ depends on FORCEDETH && EXPERIMENTAL ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config CS89x0 ++ tristate "CS89x0 support" ++ depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) ++ ---help--- ++ Support for CS89x0 chipset based Ethernet cards. If you have a ++ network (Ethernet) card of this type, say Y and read the ++ Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto> as well as ++ <file:Documentation/networking/cs89x0.txt>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called cs89x0. ++ ++config TC35815 ++ tristate "TOSHIBA TC35815 Ethernet support" ++ depends on NET_PCI && PCI && TOSHIBA_JMR3927 ++ ++config DGRS ++ tristate "Digi Intl. RightSwitch SE-X support" ++ depends on NET_PCI && (PCI || EISA) ++ ---help--- ++ This is support for the Digi International RightSwitch series of ++ PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6 ++ models. If you have a network card of this type, say Y and read the ++ Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. More specific ++ information is contained in <file:Documentation/networking/dgrs.txt>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called dgrs. ++ ++config EEPRO100 ++ tristate "EtherExpressPro/100 support (eepro100, original Becker driver)" ++ depends on NET_PCI && PCI ++ select MII ++ help ++ If you have an Intel EtherExpress PRO/100 PCI network (Ethernet) ++ card, say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called eepro100. ++ ++ ++config E100 ++ tristate "Intel(R) PRO/100+ support" ++ depends on NET_PCI && PCI ++ select MII ++ ---help--- ++ This driver supports Intel(R) PRO/100 family of adapters. ++ To verify that your adapter is supported, find the board ID number ++ on the adapter. Look for a label that has a barcode and a number ++ in the format 123456-001 (six digits hyphen three digits). ++ ++ Use the above information and the Adapter & Driver ID Guide at: ++ ++ <http://support.intel.com/support/network/adapter/pro100/21397.htm> ++ ++ to identify the adapter. ++ ++ For the latest Intel PRO/100 network driver for Linux, see: ++ ++ <http://appsr.intel.com/scripts-df/support_intel.asp> ++ ++ More specific information on configuring the driver is in ++ <file:Documentation/networking/e100.txt>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called e100. ++ ++config LNE390 ++ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" ++ depends on NET_PCI && EISA && EXPERIMENTAL ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called lne390. ++ ++config FEALNX ++ tristate "Myson MTD-8xx PCI Ethernet support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet ++ cards. Specifications and data at ++ <http://www.myson.com.hk/mtd/datasheet/>. ++ ++config NATSEMI ++ tristate "National Semiconductor DP8381x series PCI Ethernet support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ help ++ This driver is for the National Semiconductor DP83810 series, ++ which is used in cards from PureData, NetGear, Linksys ++ and others, including the 83815 chip. ++ More specific information and updates are available from ++ <http://www.scyld.com/network/natsemi.html>. ++ ++config NE2K_PCI ++ tristate "PCI NE2000 and clones support (see help)" ++ depends on NET_PCI && PCI ++ select CRC32 ++ ---help--- ++ This driver is for NE2000 compatible PCI cards. It will not work ++ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 ++ support" below). If you have a PCI NE2000 network (Ethernet) card, ++ say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ This driver also works for the following NE2000 clone cards: ++ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 ++ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond ++ Holtek HT80232 Holtek HT80229 ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ne2k-pci. ++ ++config NE3210 ++ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" ++ depends on NET_PCI && EISA && EXPERIMENTAL ++ select CRC32 ++ ---help--- ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. Note that this driver ++ will NOT WORK for NE3200 cards as they are completely different. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ne3210. ++ ++config ES3210 ++ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" ++ depends on NET_PCI && EISA && EXPERIMENTAL ++ select CRC32 ++ help ++ If you have a network (Ethernet) card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called es3210. ++ ++config 8139CP ++ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" ++ depends on NET_PCI && PCI && EXPERIMENTAL ++ select CRC32 ++ select MII ++ help ++ This is a driver for the Fast Ethernet PCI network cards based on ++ the RTL8139C+ chips. If you have one of those, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called 8139cp. This is recommended. ++ ++config 8139TOO ++ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ ---help--- ++ This is a driver for the Fast Ethernet PCI network cards based on ++ the RTL 8129/8130/8139 chips. If you have one of those, say Y and ++ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called 8139too. This is recommended. ++ ++config 8139TOO_PIO ++ bool "Use PIO instead of MMIO" ++ default y ++ depends on 8139TOO ++ help ++ This instructs the driver to use programmed I/O ports (PIO) instead ++ of PCI shared memory (MMIO). This can possibly solve some problems ++ in case your mainboard has memory consistency issues. If unsure, ++ say N. ++ ++config 8139TOO_TUNE_TWISTER ++ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" ++ depends on 8139TOO ++ help ++ This implements a function which might come in handy in case you ++ are using low quality on long cabling. It is required for RealTek ++ RTL-8139 revision K boards, and totally unused otherwise. It tries ++ to match the transceiver to the cable characteristics. This is ++ experimental since hardly documented by the manufacturer. ++ If unsure, say Y. ++ ++config 8139TOO_8129 ++ bool "Support for older RTL-8129/8130 boards" ++ depends on 8139TOO ++ help ++ This enables support for the older and uncommon RTL-8129 and ++ RTL-8130 chips, which support MII via an external transceiver, ++ instead of an internal one. Disabling this option will save some ++ memory by making the code size smaller. If unsure, say Y. ++ ++config 8139_OLD_RX_RESET ++ bool "Use older RX-reset method" ++ depends on 8139TOO ++ help ++ The 8139too driver was recently updated to contain a more rapid ++ reset sequence, in the face of severe receive errors. This "new" ++ RX-reset method should be adequate for all boards. But if you ++ experience problems, you can enable this option to restore the ++ old RX-reset behavior. If unsure, say N. ++ ++config SIS900 ++ tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ ---help--- ++ This is a driver for the Fast Ethernet PCI network cards based on ++ the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in ++ SiS 630 and SiS 540 chipsets. ++ ++ This driver also supports AMD 79C901 HomePNA so that you can use ++ your phone line as a network cable. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sis900. This is recommended. ++ ++config EPIC100 ++ tristate "SMC EtherPower II" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, ++ which is based on the SMC83c17x (EPIC/100). ++ More specific information and updates are available from ++ <http://www.scyld.com/network/epic100.html>. ++ ++config SUNDANCE ++ tristate "Sundance Alta support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ This driver is for the Sundance "Alta" chip. ++ More specific information and updates are available from ++ <http://www.scyld.com/network/sundance.html>. ++ ++config SUNDANCE_MMIO ++ bool "Use MMIO instead of PIO" ++ depends on SUNDANCE ++ help ++ Enable memory-mapped I/O for interaction with Sundance NIC registers. ++ Do NOT enable this by default, PIO (enabled when MMIO is disabled) ++ is known to solve bugs on certain chips. ++ ++ If unsure, say N. ++ ++config TLAN ++ tristate "TI ThunderLAN support" ++ depends on NET_PCI && (PCI || EISA) && !64BIT ++ ---help--- ++ If you have a PCI Ethernet network card based on the ThunderLAN chip ++ which is supported by this driver, say Y and read the ++ Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ Devices currently supported by this driver are Compaq Netelligent, ++ Compaq NetFlex and Olicom cards. Please read the file ++ <file:Documentation/networking/tlan.txt> for more details. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called tlan. ++ ++ Please email feedback to <torben.mathiasen@compaq.com>. ++ ++config VIA_RHINE ++ tristate "VIA Rhine support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select MII ++ help ++ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), ++ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type ++ Ethernet functions can also be found integrated on South Bridges ++ (e.g. VT8235). ++ ++ To compile this driver as a module, choose M here. The module ++ will be called via-rhine. ++ ++config VIA_RHINE_MMIO ++ bool "Use MMIO instead of PIO" ++ depends on VIA_RHINE ++ help ++ This instructs the driver to use PCI shared memory (MMIO) instead of ++ programmed I/O ports (PIO). Enabling this gives an improvement in ++ processing time in parts of the driver. ++ ++ If unsure, say Y. ++ ++config VIA_RHINE_NAPI ++ bool "Use Rx Polling (NAPI)" ++ depends on VIA_RHINE ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++config LAN_SAA9730 ++ bool "Philips SAA9730 Ethernet support" ++ depends on NET_PCI && PCI && MIPS_ATLAS ++ help ++ The SAA9730 is a combined multimedia and peripheral controller used ++ in thin clients, Internet access terminals, and diskless ++ workstations. ++ See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>. ++ ++config SC92031 ++ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" ++ depends on NET_PCI && PCI && EXPERIMENTAL ++ select CRC32 ++ ---help--- ++ This is a driver for the Fast Ethernet PCI network cards based on ++ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you ++ have one of these, say Y here. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sc92031. This is recommended. ++ ++config NET_POCKET ++ bool "Pocket and portable adapters" ++ depends on NET_ETHERNET && PARPORT ++ ---help--- ++ Cute little network (Ethernet) devices which attach to the parallel ++ port ("pocket adapters"), commonly used with laptops. If you have ++ one of those, say Y and read the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ If you want to plug a network (or some other) card into the PCMCIA ++ (or PC-card) slot of your laptop instead (PCMCIA is the standard for ++ credit card size extension cards used by all modern laptops), you ++ need the pcmcia-cs package (location contained in the file ++ <file:Documentation/Changes>) and you can say N here. ++ ++ Laptop users should read the Linux Laptop home page at ++ <http://www.linux-on-laptops.com/> or ++ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>. ++ ++ Note that the answer to this question doesn't directly affect the ++ kernel: saying N will just cause the configurator to skip all ++ the questions about this class of network devices. If you say Y, you ++ will be asked for your specific device in the following questions. ++ ++config ATP ++ tristate "AT-LAN-TEC/RealTek pocket adapter support" ++ depends on NET_POCKET && PARPORT && X86 ++ select CRC32 ++ ---help--- ++ This is a network (Ethernet) device which attaches to your parallel ++ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO, ++ available from <http://www.tldp.org/docs.html#howto>, if you ++ want to use this. If you intend to use this driver, you should have ++ said N to the "Parallel printer support", because the two drivers ++ don't like each other. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called atp. ++ ++config DE600 ++ tristate "D-Link DE600 pocket adapter support" ++ depends on NET_POCKET && PARPORT ++ ---help--- ++ This is a network (Ethernet) device which attaches to your parallel ++ port. Read <file:Documentation/networking/DLINK.txt> as well as the ++ Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>, if you want to use ++ this. It is possible to have several devices share a single parallel ++ port and it is safe to compile the corresponding drivers into the ++ kernel. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called de600. ++ ++config DE620 ++ tristate "D-Link DE620 pocket adapter support" ++ depends on NET_POCKET && PARPORT ++ ---help--- ++ This is a network (Ethernet) device which attaches to your parallel ++ port. Read <file:Documentation/networking/DLINK.txt> as well as the ++ Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>, if you want to use ++ this. It is possible to have several devices share a single parallel ++ port and it is safe to compile the corresponding drivers into the ++ kernel. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called de620. ++ ++config SGISEEQ ++ tristate "SGI Seeq ethernet controller support" ++ depends on NET_ETHERNET && SGI_IP22 ++ help ++ Say Y here if you have an Seeq based Ethernet network card. This is ++ used in many Silicon Graphics machines. ++ ++config DECLANCE ++ tristate "DEC LANCE ethernet controller support" ++ depends on NET_ETHERNET && MACH_DECSTATION ++ select CRC32 ++ help ++ This driver is for the series of Ethernet controllers produced by ++ DEC (now Compaq) based on the AMD Lance chipset, including the ++ DEPCA series. (This chipset is better known via the NE2100 cards.) ++ ++config 68360_ENET ++ bool "Motorola 68360 ethernet controller" ++ depends on M68360 ++ help ++ Say Y here if you want to use the built-in ethernet controller of ++ the Motorola 68360 processor. ++ ++config FEC ++ bool "FEC ethernet controller (of ColdFire CPUs)" ++ depends on M523x || M527x || M5272 || M528x || M520x ++ help ++ Say Y here if you want to use the built-in 10/100 Fast ethernet ++ controller on some Motorola ColdFire processors. ++ ++config FEC2 ++ bool "Second FEC ethernet controller (on some ColdFire CPUs)" ++ depends on FEC ++ help ++ Say Y here if you want to use the second built-in 10/100 Fast ++ ethernet controller on some Motorola ColdFire processors. ++ ++config NE_H8300 ++ tristate "NE2000 compatible support for H8/300" ++ depends on H8300 && NET_ETHERNET ++ help ++ Say Y here if you want to use the NE2000 compatible ++ controller on the Renesas H8/300 processor. ++ ++source "drivers/net/fec_8xx/Kconfig" ++source "drivers/net/fs_enet/Kconfig" ++ ++endmenu ++ ++# ++# Gigabit Ethernet ++# ++ ++menu "Ethernet (1000 Mbit)" ++ depends on !UML ++ ++config ACENIC ++ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" ++ depends on PCI ++ ---help--- ++ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear ++ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet ++ adapter. The driver allows for using the Jumbo Frame option (9000 ++ bytes/frame) however it requires that your switches can handle this ++ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig ++ line. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called acenic. ++ ++config ACENIC_OMIT_TIGON_I ++ bool "Omit support for old Tigon I based AceNICs" ++ depends on ACENIC ++ help ++ Say Y here if you only have Tigon II based AceNICs and want to leave ++ out support for the older Tigon I based cards which are no longer ++ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B ++ version)). This will reduce the size of the driver object by ++ app. 100KB. If you are not sure whether your card is a Tigon I or a ++ Tigon II, say N here. ++ ++ The safe and default value for this is N. ++ ++config DL2K ++ tristate "D-Link DL2000-based Gigabit Ethernet support" ++ depends on PCI ++ select CRC32 ++ help ++ This driver supports D-Link 2000-based gigabit ethernet cards, which ++ includes ++ D-Link DGE-550T Gigabit Ethernet Adapter. ++ D-Link DL2000-based Gigabit Ethernet Adapter. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called dl2k. ++ ++config E1000 ++ tristate "Intel(R) PRO/1000 Gigabit Ethernet support" ++ depends on PCI ++ ---help--- ++ This driver supports Intel(R) PRO/1000 gigabit ethernet family of ++ adapters. For more information on how to identify your adapter, go ++ to the Adapter & Driver ID Guide at: ++ ++ <http://support.intel.com/support/network/adapter/pro100/21397.htm> ++ ++ For general information and support, go to the Intel support ++ website at: ++ ++ <http://support.intel.com> ++ ++ More specific information on configuring the driver is in ++ <file:Documentation/networking/e1000.txt>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called e1000. ++ ++config E1000_NAPI ++ bool "Use Rx Polling (NAPI)" ++ depends on E1000 ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config E1000_DISABLE_PACKET_SPLIT ++ bool "Disable Packet Split for PCI express adapters" ++ depends on E1000 ++ help ++ Say Y here if you want to use the legacy receive path for PCI express ++ hardware. ++ ++ If in doubt, say N. ++ ++source "drivers/net/ixp2000/Kconfig" ++ ++config MYRI_SBUS ++ tristate "MyriCOM Gigabit Ethernet support" ++ depends on SBUS ++ help ++ This driver supports MyriCOM Sbus gigabit Ethernet cards. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called myri_sbus. This is recommended. ++ ++config NS83820 ++ tristate "National Semiconductor DP83820 support" ++ depends on PCI ++ help ++ This is a driver for the National Semiconductor DP83820 series ++ of gigabit ethernet MACs. Cards using this chipset include ++ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, ++ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of ++ zero copy. ++ ++config HAMACHI ++ tristate "Packet Engines Hamachi GNIC-II support" ++ depends on PCI ++ select MII ++ help ++ If you have a Gigabit Ethernet card of this type, say Y and read ++ the Ethernet-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called hamachi. ++ ++config YELLOWFIN ++ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)" ++ depends on PCI && EXPERIMENTAL ++ select CRC32 ++ ---help--- ++ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet ++ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is ++ used by the Beowulf Linux cluster project. See ++ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more ++ information about this driver in particular and Beowulf in general. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called yellowfin. This is recommended. ++ ++config R8169 ++ tristate "Realtek 8169 gigabit ethernet support" ++ depends on PCI ++ select CRC32 ++ ---help--- ++ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called r8169. This is recommended. ++ ++config R8169_NAPI ++ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" ++ depends on R8169 && EXPERIMENTAL ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config R8169_VLAN ++ bool "VLAN support" ++ depends on R8169 && VLAN_8021Q ++ ---help--- ++ Say Y here for the r8169 driver to support the functions required ++ by the kernel 802.1Q code. ++ ++ If in doubt, say Y. ++ ++config SIS190 ++ tristate "SiS190/SiS191 gigabit ethernet support" ++ depends on PCI ++ select CRC32 ++ select MII ++ ---help--- ++ Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or ++ a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to ++ appear in lan on motherboard designs which are based on SiS 965 ++ and SiS 966 south bridge. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sis190. This is recommended. ++ ++config SKGE ++ tristate "New SysKonnect GigaEthernet support" ++ depends on PCI ++ select CRC32 ++ ---help--- ++ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx ++ and related Gigabit Ethernet adapters. It is a new smaller driver ++ with better performance and more complete ethtool support. ++ ++ It does not support the link failover and network management ++ features that "portable" vendor supplied sk98lin driver does. ++ ++ This driver supports adapters based on the original Yukon chipset: ++ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, ++ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. ++ ++ It does not support the newer Yukon2 chipset: a separate driver, ++ sky2, is provided for Yukon2-based adapters. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called skge. This is recommended. ++ ++config SKY2 ++ tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" ++ depends on PCI ++ select CRC32 ++ ---help--- ++ This driver supports Gigabit Ethernet adapters based on the ++ Marvell Yukon 2 chipset: ++ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ ++ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 ++ ++ There is companion driver for the older Marvell Yukon and ++ Genesis based adapters: skge. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sky2. This is recommended. ++ ++config SK98LIN ++ tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" ++ depends on PCI ++ ---help--- ++ Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx ++ compliant Gigabit Ethernet Adapter. ++ ++ This driver supports the original Yukon chipset. This driver is ++ deprecated and will be removed from the kernel in the near future, ++ it has been replaced by the skge driver. skge is cleaner and ++ seems to work better. ++ ++ This driver does not support the newer Yukon2 chipset. A separate ++ driver, sky2, is provided to support Yukon2-based adapters. ++ ++ The following adapters are supported by this driver: ++ - 3Com 3C940 Gigabit LOM Ethernet Adapter ++ - 3Com 3C941 Gigabit LOM Ethernet Adapter ++ - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter ++ - Allied Telesyn AT-2971T Gigabit Ethernet Adapter ++ - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 ++ - EG1032 v2 Instant Gigabit Network Adapter ++ - EG1064 v2 Instant Gigabit Network Adapter ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) ++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) ++ - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) ++ - Marvell RDK-8001 Adapter ++ - Marvell RDK-8002 Adapter ++ - Marvell RDK-8003 Adapter ++ - Marvell RDK-8004 Adapter ++ - Marvell RDK-8006 Adapter ++ - Marvell RDK-8007 Adapter ++ - Marvell RDK-8008 Adapter ++ - Marvell RDK-8009 Adapter ++ - Marvell RDK-8010 Adapter ++ - Marvell RDK-8011 Adapter ++ - Marvell RDK-8012 Adapter ++ - Marvell RDK-8052 Adapter ++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) ++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) ++ - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) ++ - SK-9521 10/100/1000Base-T Adapter ++ - SK-9521 V2.0 10/100/1000Base-T Adapter ++ - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) ++ - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter ++ - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) ++ - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) ++ - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter ++ - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) ++ - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) ++ - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter ++ - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) ++ - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter ++ - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) ++ - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter ++ - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) ++ - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) ++ - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter ++ - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) ++ - SMC EZ Card 1000 (SMC9452TXV.2) ++ ++ The adapters support Jumbo Frames. ++ The dual link adapters support link-failover and dual port features. ++ Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support ++ the scatter-gather functionality with sendfile(). Please refer to ++ <file:Documentation/networking/sk98lin.txt> for more information about ++ optional driver parameters. ++ Questions concerning this driver may be addressed to: ++ <linux@syskonnect.de> ++ ++ If you want to compile this driver as a module ( = code which can be ++ inserted in and removed from the running kernel whenever you want), ++ say M here and read <file:Documentation/kbuild/modules.txt>. The module will ++ be called sk98lin. This is recommended. ++ ++config VIA_VELOCITY ++ tristate "VIA Velocity support" ++ depends on NET_PCI && PCI ++ select CRC32 ++ select CRC_CCITT ++ select MII ++ help ++ If you have a VIA "Velocity" based network card say Y here. ++ ++ To compile this driver as a module, choose M here. The module ++ will be called via-velocity. ++ ++config TIGON3 ++ tristate "Broadcom Tigon3 support" ++ depends on PCI ++ help ++ This driver supports Broadcom Tigon3 based gigabit Ethernet cards. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called tg3. This is recommended. ++ ++config BNX2 ++ tristate "Broadcom NetXtremeII support" ++ depends on PCI ++ select CRC32 ++ select ZLIB_INFLATE ++ help ++ This driver supports Broadcom NetXtremeII gigabit Ethernet cards. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called bnx2. This is recommended. ++ ++config SPIDER_NET ++ tristate "Spider Gigabit Ethernet driver" ++ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) ++ select FW_LOADER ++ help ++ This driver supports the Gigabit Ethernet chips present on the ++ Cell Processor-Based Blades from IBM. ++ ++config TSI108_ETH ++ tristate "Tundra TSI108 gigabit Ethernet support" ++ depends on TSI108_BRIDGE ++ help ++ This driver supports Tundra TSI108 gigabit Ethernet ports. ++ To compile this driver as a module, choose M here: the module ++ will be called tsi108_eth. ++ ++config GIANFAR ++ tristate "Gianfar Ethernet" ++ depends on 85xx || 83xx || PPC_86xx ++ select PHYLIB ++ select CRC32 ++ help ++ This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, ++ and MPC86xx family of chips, and the FEC on the 8540. ++ ++config GFAR_NAPI ++ bool "NAPI Support" ++ depends on GIANFAR ++ ++config UCC_GETH ++ tristate "Freescale QE UCC GETH" ++ depends on QUICC_ENGINE && UCC_FAST ++ help ++ This driver supports the Gigabit Ethernet mode of QE UCC. ++ QE can be found on MPC836x CPUs. ++ ++config UGETH_NAPI ++ bool "NAPI Support" ++ depends on UCC_GETH ++ ++config UGETH_MAGIC_PACKET ++ bool "Magic Packet detection support" ++ depends on UCC_GETH ++ ++config UGETH_FILTERING ++ bool "Mac address filtering support" ++ depends on UCC_GETH ++ ++config UGETH_TX_ON_DEMOND ++ bool "Transmit on Demond support" ++ depends on UCC_GETH ++ ++config UGETH_HAS_GIGA ++ bool ++ depends on UCC_GETH && PPC_MPC836x ++ ++config MV643XX_ETH ++ tristate "MV-643XX Ethernet support" ++ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32) ++ select MII ++ help ++ This driver supports the gigabit Ethernet on the Marvell MV643XX ++ chipset which is used in the Momenco Ocelot C and Jaguar ATX and ++ Pegasos II, amongst other PPC and MIPS boards. ++ ++config QLA3XXX ++ tristate "QLogic QLA3XXX Network Driver Support" ++ depends on PCI ++ help ++ This driver supports QLogic ISP3XXX gigabit Ethernet cards. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called qla3xxx. ++ ++config ATL1 ++ tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)" ++ depends on PCI && EXPERIMENTAL ++ select CRC32 ++ select MII ++ help ++ This driver supports the Attansic L1 gigabit ethernet adapter. ++ ++ To compile this driver as a module, choose M here. The module ++ will be called atl1. ++ ++endmenu ++ ++# ++# 10 Gigabit Ethernet ++# ++ ++menu "Ethernet (10000 Mbit)" ++ depends on !UML ++ ++config CHELSIO_T1 ++ tristate "Chelsio 10Gb Ethernet support" ++ depends on PCI ++ select CRC32 ++ help ++ This driver supports Chelsio gigabit and 10-gigabit ++ Ethernet cards. More information about adapter features and ++ performance tuning is in <file:Documentation/networking/cxgb.txt>. ++ ++ For general information about Chelsio and our products, visit ++ our website at <http://www.chelsio.com>. ++ ++ For customer support, please visit our customer support page at ++ <http://www.chelsio.com/support.htm>. ++ ++ Please send feedback to <linux-bugs@chelsio.com>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called cxgb. ++ ++config CHELSIO_T1_1G ++ bool "Chelsio gigabit Ethernet support" ++ depends on CHELSIO_T1 ++ help ++ Enables support for Chelsio's gigabit Ethernet PCI cards. If you ++ are using only 10G cards say 'N' here. ++ ++config CHELSIO_T1_NAPI ++ bool "Use Rx Polling (NAPI)" ++ depends on CHELSIO_T1 ++ default y ++ help ++ NAPI is a driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. ++ ++config CHELSIO_T3 ++ tristate "Chelsio Communications T3 10Gb Ethernet support" ++ depends on PCI ++ select FW_LOADER ++ help ++ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet ++ adapters. ++ ++ For general information about Chelsio and our products, visit ++ our website at <http://www.chelsio.com>. ++ ++ For customer support, please visit our customer support page at ++ <http://www.chelsio.com/support.htm>. ++ ++ Please send feedback to <linux-bugs@chelsio.com>. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called cxgb3. ++ ++config EHEA ++ tristate "eHEA Ethernet support" ++ depends on IBMEBUS ++ ---help--- ++ This driver supports the IBM pSeries eHEA ethernet adapter. ++ ++ To compile the driver as a module, choose M here. The module ++ will be called ehea. ++ ++config IXGB ++ tristate "Intel(R) PRO/10GbE support" ++ depends on PCI ++ ---help--- ++ This driver supports Intel(R) PRO/10GbE family of ++ adapters. For more information on how to identify your adapter, go ++ to the Adapter & Driver ID Guide at: ++ ++ <http://support.intel.com/support/network/adapter/pro100/21397.htm> ++ ++ For general information and support, go to the Intel support ++ website at: ++ ++ <http://support.intel.com> ++ ++ More specific information on configuring the driver is in ++ <file:Documentation/networking/ixgb.txt>. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called ixgb. ++ ++config IXGB_NAPI ++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" ++ depends on IXGB && EXPERIMENTAL ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config S2IO ++ tristate "S2IO 10Gbe XFrame NIC" ++ depends on PCI ++ ---help--- ++ This driver supports the 10Gbe XFrame NIC of S2IO. ++ More specific information on configuring the driver is in ++ <file:Documentation/networking/s2io.txt>. ++ ++config S2IO_NAPI ++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" ++ depends on S2IO && EXPERIMENTAL ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. It is ++ still somewhat experimental and thus not yet enabled by default. ++ ++ If your estimated Rx load is 10kpps or more, or if the card will be ++ deployed on potentially unfriendly networks (e.g. in a firewall), ++ then say Y here. ++ ++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more ++ information. ++ ++ If in doubt, say N. ++ ++config MYRI10GE ++ tristate "Myricom Myri-10G Ethernet support" ++ depends on PCI ++ select FW_LOADER ++ select CRC32 ++ ---help--- ++ This driver supports Myricom Myri-10G Dual Protocol interface in ++ Ethernet mode. If the eeprom on your board is not recent enough, ++ you will need a newer firmware image. ++ You may get this image or more information, at: ++ ++ <http://www.myri.com/scs/download-Myri10GE.html> ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module ++ will be called myri10ge. ++ ++config NETXEN_NIC ++ tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" ++ depends on PCI ++ help ++ This enables the support for NetXen's Gigabit Ethernet card. ++ ++config PASEMI_MAC ++ tristate "PA Semi 1/10Gbit MAC" ++ depends on PPC64 && PCI ++ help ++ This driver supports the on-chip 1/10Gbit Ethernet controller on ++ PA Semi's PWRficient line of chips. ++ ++endmenu ++ ++source "drivers/net/tokenring/Kconfig" ++ ++source "drivers/net/wireless/Kconfig" ++ ++source "drivers/net/pcmcia/Kconfig" ++ ++source "drivers/net/wan/Kconfig" ++ ++source "drivers/atm/Kconfig" ++ ++source "drivers/s390/net/Kconfig" ++ ++config ISERIES_VETH ++ tristate "iSeries Virtual Ethernet driver support" ++ depends on PPC_ISERIES ++ ++config RIONET ++ tristate "RapidIO Ethernet over messaging driver support" ++ depends on RAPIDIO ++ ++config RIONET_TX_SIZE ++ int "Number of outbound queue entries" ++ depends on RIONET ++ default "128" ++ ++config RIONET_RX_SIZE ++ int "Number of inbound queue entries" ++ depends on RIONET ++ default "128" ++ ++config FDDI ++ bool "FDDI driver support" ++ depends on (PCI || EISA || TC) ++ help ++ Fiber Distributed Data Interface is a high speed local area network ++ design; essentially a replacement for high speed Ethernet. FDDI can ++ run over copper or fiber. If you are connected to such a network and ++ want a driver for the FDDI card in your computer, say Y here (and ++ then also Y to the driver for your FDDI card, below). Most people ++ will say N. ++ ++config DEFXX ++ tristate "Digital DEFTA/DEFEA/DEFPA adapter support" ++ depends on FDDI && (PCI || EISA || TC) ++ ---help--- ++ This is support for the DIGITAL series of TURBOchannel (DEFTA), ++ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you ++ to a local FDDI network. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called defxx. If unsure, say N. ++ ++config DEFXX_MMIO ++ bool ++ prompt "Use MMIO instead of PIO" if PCI || EISA ++ depends on DEFXX ++ default n if PCI || EISA ++ default y ++ ---help--- ++ This instructs the driver to use EISA or PCI memory-mapped I/O ++ (MMIO) as appropriate instead of programmed I/O ports (PIO). ++ Enabling this gives an improvement in processing time in parts ++ of the driver, but it may cause problems with EISA (DEFEA) ++ adapters. TURBOchannel does not have the concept of I/O ports, ++ so MMIO is always used for these (DEFTA) adapters. ++ ++ If unsure, say N. ++ ++config SKFP ++ tristate "SysKonnect FDDI PCI support" ++ depends on FDDI && PCI ++ select BITREVERSE ++ ---help--- ++ Say Y here if you have a SysKonnect FDDI PCI adapter. ++ The following adapters are supported by this driver: ++ - SK-5521 (SK-NET FDDI-UP) ++ - SK-5522 (SK-NET FDDI-UP DAS) ++ - SK-5541 (SK-NET FDDI-FP) ++ - SK-5543 (SK-NET FDDI-LP) ++ - SK-5544 (SK-NET FDDI-LP DAS) ++ - SK-5821 (SK-NET FDDI-UP64) ++ - SK-5822 (SK-NET FDDI-UP64 DAS) ++ - SK-5841 (SK-NET FDDI-FP64) ++ - SK-5843 (SK-NET FDDI-LP64) ++ - SK-5844 (SK-NET FDDI-LP64 DAS) ++ - Netelligent 100 FDDI DAS Fibre SC ++ - Netelligent 100 FDDI SAS Fibre SC ++ - Netelligent 100 FDDI DAS UTP ++ - Netelligent 100 FDDI SAS UTP ++ - Netelligent 100 FDDI SAS Fibre MIC ++ ++ Read <file:Documentation/networking/skfp.txt> for information about ++ the driver. ++ ++ Questions concerning this driver can be addressed to: ++ <linux@syskonnect.de> ++ ++ To compile this driver as a module, choose M here: the module ++ will be called skfp. This is recommended. ++ ++config HIPPI ++ bool "HIPPI driver support (EXPERIMENTAL)" ++ depends on EXPERIMENTAL && INET && PCI ++ help ++ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and ++ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI ++ can run over copper (25m) or fiber (300m on multi-mode or 10km on ++ single-mode). HIPPI networks are commonly used for clusters and to ++ connect to super computers. If you are connected to a HIPPI network ++ and have a HIPPI network card in your computer that you want to use ++ under Linux, say Y here (you must also remember to enable the driver ++ for your HIPPI card below). Most people will say N here. ++ ++config ROADRUNNER ++ tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)" ++ depends on HIPPI && PCI ++ help ++ Say Y here if this is your PCI HIPPI network card. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called rrunner. If unsure, say N. ++ ++config ROADRUNNER_LARGE_RINGS ++ bool "Use large TX/RX rings (EXPERIMENTAL)" ++ depends on ROADRUNNER ++ help ++ If you say Y here, the RoadRunner driver will preallocate up to 2 MB ++ of additional memory to allow for fastest operation, both for ++ transmitting and receiving. This memory cannot be used by any other ++ kernel code or by user space programs. Say Y here only if you have ++ the memory. ++ ++config PLIP ++ tristate "PLIP (parallel port) support" ++ depends on PARPORT ++ ---help--- ++ PLIP (Parallel Line Internet Protocol) is used to create a ++ reasonably fast mini network consisting of two (or, rarely, more) ++ local machines. A PLIP link from a Linux box is a popular means to ++ install a Linux distribution on a machine which doesn't have a ++ CD-ROM drive (a minimal system has to be transferred with floppies ++ first). The kernels on both machines need to have this PLIP option ++ enabled for this to work. ++ ++ The PLIP driver has two modes, mode 0 and mode 1. The parallel ++ ports (the connectors at the computers with 25 holes) are connected ++ with "null printer" or "Turbo Laplink" cables which can transmit 4 ++ bits at a time (mode 0) or with special PLIP cables, to be used on ++ bidirectional parallel ports only, which can transmit 8 bits at a ++ time (mode 1); you can find the wiring of these cables in ++ <file:Documentation/networking/PLIP.txt>. The cables can be up to ++ 15m long. Mode 0 works also if one of the machines runs DOS/Windows ++ and has some PLIP software installed, e.g. the Crynwr PLIP packet ++ driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) ++ and winsock or NCSA's telnet. ++ ++ If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well ++ as the NET-3-HOWTO, both available from ++ <http://www.tldp.org/docs.html#howto>. Note that the PLIP ++ protocol has been changed and this PLIP driver won't work together ++ with the PLIP support in Linux versions 1.0.x. This option enlarges ++ your kernel by about 8 KB. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called plip. If unsure, say Y or M, in case you buy a laptop ++ later. ++ ++config PPP ++ tristate "PPP (point-to-point protocol) support" ++ select SLHC ++ ---help--- ++ PPP (Point to Point Protocol) is a newer and better SLIP. It serves ++ the same purpose: sending Internet traffic over telephone (and other ++ serial) lines. Ask your access provider if they support it, because ++ otherwise you can't use it; most Internet access providers these ++ days support PPP rather than SLIP. ++ ++ To use PPP, you need an additional program called pppd as described ++ in the PPP-HOWTO, available at ++ <http://www.tldp.org/docs.html#howto>. Make sure that you have ++ the version of pppd recommended in <file:Documentation/Changes>. ++ The PPP option enlarges your kernel by about 16 KB. ++ ++ There are actually two versions of PPP: the traditional PPP for ++ asynchronous lines, such as regular analog phone lines, and ++ synchronous PPP which can be used over digital ISDN lines for ++ example. If you want to use PPP over phone lines or other ++ asynchronous serial lines, you need to say Y (or M) here and also to ++ the next option, "PPP support for async serial ports". For PPP over ++ synchronous lines, you should say Y (or M) here and to "Support ++ synchronous PPP", below. ++ ++ If you said Y to "Version information on all symbols" above, then ++ you cannot compile the PPP driver into the kernel; you can then only ++ compile it as a module. To compile this driver as a module, choose M ++ here and read <file:Documentation/networking/net-modules.txt>. ++ The module will be called ppp_generic. ++ ++config PPP_MULTILINK ++ bool "PPP multilink support (EXPERIMENTAL)" ++ depends on PPP && EXPERIMENTAL ++ help ++ PPP multilink is a protocol (defined in RFC 1990) which allows you ++ to combine several (logical or physical) lines into one logical PPP ++ connection, so that you can utilize your full bandwidth. ++ ++ This has to be supported at the other end as well and you need a ++ version of the pppd daemon which understands the multilink protocol. ++ ++ If unsure, say N. ++ ++config PPP_FILTER ++ bool "PPP filtering" ++ depends on PPP ++ help ++ Say Y here if you want to be able to filter the packets passing over ++ PPP interfaces. This allows you to control which packets count as ++ activity (i.e. which packets will reset the idle timer or bring up ++ a demand-dialed link) and which packets are to be dropped entirely. ++ You need to say Y here if you wish to use the pass-filter and ++ active-filter options to pppd. ++ ++ If unsure, say N. ++ ++config PPP_ASYNC ++ tristate "PPP support for async serial ports" ++ depends on PPP ++ select CRC_CCITT ++ ---help--- ++ Say Y (or M) here if you want to be able to use PPP over standard ++ asynchronous serial ports, such as COM1 or COM2 on a PC. If you use ++ a modem (not a synchronous or ISDN modem) to contact your ISP, you ++ need this option. ++ ++ To compile this driver as a module, choose M here. ++ ++ If unsure, say Y. ++ ++config PPP_SYNC_TTY ++ tristate "PPP support for sync tty ports" ++ depends on PPP ++ help ++ Say Y (or M) here if you want to be able to use PPP over synchronous ++ (HDLC) tty devices, such as the SyncLink adapter. These devices ++ are often used for high-speed leased lines like T1/E1. ++ ++ To compile this driver as a module, choose M here. ++ ++config PPP_DEFLATE ++ tristate "PPP Deflate compression" ++ depends on PPP ++ select ZLIB_INFLATE ++ select ZLIB_DEFLATE ++ ---help--- ++ Support for the Deflate compression method for PPP, which uses the ++ Deflate algorithm (the same algorithm that gzip uses) to compress ++ each PPP packet before it is sent over the wire. The machine at the ++ other end of the PPP link (usually your ISP) has to support the ++ Deflate compression method as well for this to be useful. Even if ++ they don't support it, it is safe to say Y here. ++ ++ To compile this driver as a module, choose M here. ++ ++config PPP_BSDCOMP ++ tristate "PPP BSD-Compress compression" ++ depends on PPP ++ ---help--- ++ Support for the BSD-Compress compression method for PPP, which uses ++ the LZW compression method to compress each PPP packet before it is ++ sent over the wire. The machine at the other end of the PPP link ++ (usually your ISP) has to support the BSD-Compress compression ++ method as well for this to be useful. Even if they don't support it, ++ it is safe to say Y here. ++ ++ The PPP Deflate compression method ("PPP Deflate compression", ++ above) is preferable to BSD-Compress, because it compresses better ++ and is patent-free. ++ ++ Note that the BSD compression code will always be compiled as a ++ module; it is called bsd_comp and will show up in the directory ++ modules once you have said "make modules". If unsure, say N. ++ ++config PPP_MPPE ++ tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" ++ depends on PPP && EXPERIMENTAL ++ select CRYPTO ++ select CRYPTO_SHA1 ++ select CRYPTO_ARC4 ++ select CRYPTO_ECB ++ ---help--- ++ Support for the MPPE Encryption protocol, as employed by the ++ Microsoft Point-to-Point Tunneling Protocol. ++ ++ See http://pptpclient.sourceforge.net/ for information on ++ configuring PPTP clients and servers to utilize this method. ++ ++config PPPOE ++ tristate "PPP over Ethernet (EXPERIMENTAL)" ++ depends on EXPERIMENTAL && PPP ++ help ++ Support for PPP over Ethernet. ++ ++ This driver requires the latest version of pppd from the CVS ++ repository at cvs.samba.org. Alternatively, see the ++ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) ++ which contains instruction on how to use this driver (under ++ the heading "Kernel mode PPPoE"). ++ ++config PPPOATM ++ tristate "PPP over ATM" ++ depends on ATM && PPP ++ help ++ Support PPP (Point to Point Protocol) encapsulated in ATM frames. ++ This implementation does not yet comply with section 8 of RFC2364, ++ which can lead to bad results if the ATM peer loses state and ++ changes its encapsulation unilaterally. ++ ++config SLIP ++ tristate "SLIP (serial line) support" ++ ---help--- ++ Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to ++ connect to your Internet service provider or to connect to some ++ other local Unix box or if you want to configure your Linux box as a ++ Slip/CSlip server for other people to dial in. SLIP (Serial Line ++ Internet Protocol) is a protocol used to send Internet traffic over ++ serial connections such as telephone lines or null modem cables; ++ nowadays, the protocol PPP is more commonly used for this same ++ purpose. ++ ++ Normally, your access provider has to support SLIP in order for you ++ to be able to use it, but there is now a SLIP emulator called SLiRP ++ around (available from ++ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which ++ allows you to use SLIP over a regular dial up shell connection. If ++ you plan to use SLiRP, make sure to say Y to CSLIP, below. The ++ NET-3-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>, explains how to ++ configure SLIP. Note that you don't need this option if you just ++ want to run term (term is a program which gives you almost full ++ Internet connectivity if you have a regular dial up shell account on ++ some Internet connected Unix computer. Read ++ <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP ++ support will enlarge your kernel by about 4 KB. If unsure, say N. ++ ++ To compile this driver as a module, choose M here and read ++ <file:Documentation/networking/net-modules.txt>. The module will be ++ called slip. ++ ++config SLIP_COMPRESSED ++ bool "CSLIP compressed headers" ++ depends on SLIP ++ select SLHC ++ ---help--- ++ This protocol is faster than SLIP because it uses compression on the ++ TCP/IP headers (not on the data itself), but it has to be supported ++ on both ends. Ask your access provider if you are not sure and ++ answer Y, just in case. You will still be able to use plain SLIP. If ++ you plan to use SLiRP, the SLIP emulator (available from ++ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which ++ allows you to use SLIP over a regular dial up shell connection, you ++ definitely want to say Y here. The NET-3-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>, explains how to configure ++ CSLIP. This won't enlarge your kernel. ++ ++config SLHC ++ tristate ++ help ++ This option enables Van Jacobsen serial line header compression ++ routines. ++ ++config SLIP_SMART ++ bool "Keepalive and linefill" ++ depends on SLIP ++ help ++ Adds additional capabilities to the SLIP driver to support the ++ RELCOM line fill and keepalive monitoring. Ideal on poor quality ++ analogue lines. ++ ++config SLIP_MODE_SLIP6 ++ bool "Six bit SLIP encapsulation" ++ depends on SLIP ++ help ++ Just occasionally you may need to run IP over hostile serial ++ networks that don't pass all control characters or are only seven ++ bit. Saying Y here adds an extra mode you can use with SLIP: ++ "slip6". In this mode, SLIP will only send normal ASCII symbols over ++ the serial device. Naturally, this has to be supported at the other ++ end of the link as well. It's good enough, for example, to run IP ++ over the async ports of a Camtec JNT Pad. If unsure, say N. ++ ++config NET_FC ++ bool "Fibre Channel driver support" ++ depends on SCSI && PCI ++ help ++ Fibre Channel is a high speed serial protocol mainly used to connect ++ large storage devices to the computer; it is compatible with and ++ intended to replace SCSI. ++ ++ If you intend to use Fibre Channel, you need to have a Fibre channel ++ adaptor card in your computer; say Y here and to the driver for your ++ adaptor below. You also should have said Y to "SCSI support" and ++ "SCSI generic support". ++ ++config SHAPER ++ tristate "Traffic Shaper (OBSOLETE)" ++ depends on EXPERIMENTAL ++ ---help--- ++ The traffic shaper is a virtual network device that allows you to ++ limit the rate of outgoing data flow over some other network device. ++ The traffic that you want to slow down can then be routed through ++ these virtual devices. See ++ <file:Documentation/networking/shaper.txt> for more information. ++ ++ An alternative to this traffic shaper are traffic schedulers which ++ you'll get if you say Y to "QoS and/or fair queuing" in ++ "Networking options". ++ ++ To compile this driver as a module, choose M here: the module ++ will be called shaper. If unsure, say N. ++ ++config NETCONSOLE ++ tristate "Network console logging support (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ ---help--- ++ If you want to log kernel messages over the network, enable this. ++ See <file:Documentation/networking/netconsole.txt> for details. ++ ++endif #NETDEVICES ++ ++config NETPOLL ++ def_bool NETCONSOLE ++ ++config NETPOLL_RX ++ bool "Netpoll support for trapping incoming packets" ++ default n ++ depends on NETPOLL ++ ++config NETPOLL_TRAP ++ bool "Netpoll traffic trapping" ++ default n ++ depends on NETPOLL ++ ++config NET_POLL_CONTROLLER ++ def_bool NETPOLL ++ ++endmenu +diff -Nur linux-2.6.21.1/drivers/net/Makefile linux-2.6.21.1-owrt/drivers/net/Makefile +--- linux-2.6.21.1/drivers/net/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/net/Makefile 2007-05-23 23:37:01.000000000 +0200 +@@ -11,6 +11,7 @@ + obj-$(CONFIG_BONDING) += bonding/ + obj-$(CONFIG_ATL1) += atl1/ + obj-$(CONFIG_GIANFAR) += gianfar_driver.o ++obj-$(CONFIG_AR2313) += ar2313/ - obj-$(CONFIG_OAKNET) += oaknet.o 8390.o + gianfar_driver-objs := gianfar.o \ + gianfar_ethtool.o \ +@@ -38,6 +39,7 @@ + obj-$(CONFIG_MACE) += mace.o + obj-$(CONFIG_BMAC) += bmac.o +obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o obj-$(CONFIG_DGRS) += dgrs.o obj-$(CONFIG_VORTEX) += 3c59x.o obj-$(CONFIG_TYPHOON) += typhoon.o -diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natsemi.c ---- linux-2.6.17/drivers/net/natsemi.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/drivers/net/natsemi.c 2006-06-18 12:44:28.000000000 +0200 -@@ -771,6 +771,49 @@ +diff -Nur linux-2.6.21.1/drivers/net/Makefile.orig linux-2.6.21.1-owrt/drivers/net/Makefile.orig +--- linux-2.6.21.1/drivers/net/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/net/Makefile.orig 2007-05-23 23:34:01.000000000 +0200 +@@ -0,0 +1,221 @@ ++# ++# Makefile for the Linux network (ethercard) device drivers. ++# ++ ++obj-$(CONFIG_E1000) += e1000/ ++obj-$(CONFIG_IBM_EMAC) += ibm_emac/ ++obj-$(CONFIG_IXGB) += ixgb/ ++obj-$(CONFIG_CHELSIO_T1) += chelsio/ ++obj-$(CONFIG_CHELSIO_T3) += cxgb3/ ++obj-$(CONFIG_EHEA) += ehea/ ++obj-$(CONFIG_BONDING) += bonding/ ++obj-$(CONFIG_ATL1) += atl1/ ++obj-$(CONFIG_GIANFAR) += gianfar_driver.o ++ ++gianfar_driver-objs := gianfar.o \ ++ gianfar_ethtool.o \ ++ gianfar_mii.o \ ++ gianfar_sysfs.o ++ ++obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o ++ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o ++ ++# ++# link order important here ++# ++obj-$(CONFIG_PLIP) += plip.o ++ ++obj-$(CONFIG_ROADRUNNER) += rrunner.o ++ ++obj-$(CONFIG_HAPPYMEAL) += sunhme.o ++obj-$(CONFIG_SUNLANCE) += sunlance.o ++obj-$(CONFIG_SUNQE) += sunqe.o ++obj-$(CONFIG_SUNBMAC) += sunbmac.o ++obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o ++obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o ++obj-$(CONFIG_CASSINI) += cassini.o ++ ++obj-$(CONFIG_MACE) += mace.o ++obj-$(CONFIG_BMAC) += bmac.o ++ ++obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o ++obj-$(CONFIG_DGRS) += dgrs.o ++obj-$(CONFIG_VORTEX) += 3c59x.o ++obj-$(CONFIG_TYPHOON) += typhoon.o ++obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o ++obj-$(CONFIG_PCNET32) += pcnet32.o ++obj-$(CONFIG_EEPRO100) += eepro100.o ++obj-$(CONFIG_E100) += e100.o ++obj-$(CONFIG_TLAN) += tlan.o ++obj-$(CONFIG_EPIC100) += epic100.o ++obj-$(CONFIG_SIS190) += sis190.o ++obj-$(CONFIG_SIS900) += sis900.o ++obj-$(CONFIG_YELLOWFIN) += yellowfin.o ++obj-$(CONFIG_ACENIC) += acenic.o ++obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o ++obj-$(CONFIG_NATSEMI) += natsemi.o ++obj-$(CONFIG_NS83820) += ns83820.o ++obj-$(CONFIG_STNIC) += stnic.o 8390.o ++obj-$(CONFIG_FEALNX) += fealnx.o ++obj-$(CONFIG_TIGON3) += tg3.o ++obj-$(CONFIG_BNX2) += bnx2.o ++spidernet-y += spider_net.o spider_net_ethtool.o ++obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o ++obj-$(CONFIG_TC35815) += tc35815.o ++obj-$(CONFIG_SKGE) += skge.o ++obj-$(CONFIG_SKY2) += sky2.o ++obj-$(CONFIG_SK98LIN) += sk98lin/ ++obj-$(CONFIG_SKFP) += skfp/ ++obj-$(CONFIG_VIA_RHINE) += via-rhine.o ++obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o ++obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o ++obj-$(CONFIG_RIONET) += rionet.o ++ ++# ++# end link order section ++# ++ ++obj-$(CONFIG_MII) += mii.o ++obj-$(CONFIG_PHYLIB) += phy/ ++ ++obj-$(CONFIG_SUNDANCE) += sundance.o ++obj-$(CONFIG_HAMACHI) += hamachi.o ++obj-$(CONFIG_NET) += Space.o loopback.o ++obj-$(CONFIG_SEEQ8005) += seeq8005.o ++obj-$(CONFIG_NET_SB1000) += sb1000.o ++obj-$(CONFIG_MAC8390) += mac8390.o ++obj-$(CONFIG_APNE) += apne.o 8390.o ++obj-$(CONFIG_PCMCIA_PCNET) += 8390.o ++obj-$(CONFIG_SHAPER) += shaper.o ++obj-$(CONFIG_HP100) += hp100.o ++obj-$(CONFIG_SMC9194) += smc9194.o ++obj-$(CONFIG_FEC) += fec.o ++obj-$(CONFIG_68360_ENET) += 68360enet.o ++obj-$(CONFIG_WD80x3) += wd.o 8390.o ++obj-$(CONFIG_EL2) += 3c503.o 8390.o ++obj-$(CONFIG_NE2000) += ne.o 8390.o ++obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o ++obj-$(CONFIG_HPLAN) += hp.o 8390.o ++obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o ++obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o ++obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o ++obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o ++obj-$(CONFIG_E2100) += e2100.o 8390.o ++obj-$(CONFIG_ES3210) += es3210.o 8390.o ++obj-$(CONFIG_LNE390) += lne390.o 8390.o ++obj-$(CONFIG_NE3210) += ne3210.o 8390.o ++obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o ++obj-$(CONFIG_B44) += b44.o ++obj-$(CONFIG_FORCEDETH) += forcedeth.o ++obj-$(CONFIG_NE_H8300) += ne-h8300.o ++ ++obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o ++obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o ++obj-$(CONFIG_QLA3XXX) += qla3xxx.o ++ ++obj-$(CONFIG_PPP) += ppp_generic.o ++obj-$(CONFIG_PPP_ASYNC) += ppp_async.o ++obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o ++obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o ++obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o ++obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o ++obj-$(CONFIG_PPPOE) += pppox.o pppoe.o ++ ++obj-$(CONFIG_SLIP) += slip.o ++obj-$(CONFIG_SLHC) += slhc.o ++ ++obj-$(CONFIG_DUMMY) += dummy.o ++obj-$(CONFIG_IFB) += ifb.o ++obj-$(CONFIG_DE600) += de600.o ++obj-$(CONFIG_DE620) += de620.o ++obj-$(CONFIG_LANCE) += lance.o ++obj-$(CONFIG_SUN3_82586) += sun3_82586.o ++obj-$(CONFIG_SUN3LANCE) += sun3lance.o ++obj-$(CONFIG_DEFXX) += defxx.o ++obj-$(CONFIG_SGISEEQ) += sgiseeq.o ++obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o ++obj-$(CONFIG_AT1700) += at1700.o ++obj-$(CONFIG_EL1) += 3c501.o ++obj-$(CONFIG_EL16) += 3c507.o ++obj-$(CONFIG_ELMC) += 3c523.o ++obj-$(CONFIG_IBMLANA) += ibmlana.o ++obj-$(CONFIG_ELMC_II) += 3c527.o ++obj-$(CONFIG_EL3) += 3c509.o ++obj-$(CONFIG_3C515) += 3c515.o ++obj-$(CONFIG_EEXPRESS) += eexpress.o ++obj-$(CONFIG_EEXPRESS_PRO) += eepro.o ++obj-$(CONFIG_8139CP) += 8139cp.o ++obj-$(CONFIG_8139TOO) += 8139too.o ++obj-$(CONFIG_ZNET) += znet.o ++obj-$(CONFIG_LAN_SAA9730) += saa9730.o ++obj-$(CONFIG_DEPCA) += depca.o ++obj-$(CONFIG_EWRK3) += ewrk3.o ++obj-$(CONFIG_ATP) += atp.o ++obj-$(CONFIG_NI5010) += ni5010.o ++obj-$(CONFIG_NI52) += ni52.o ++obj-$(CONFIG_NI65) += ni65.o ++obj-$(CONFIG_ELPLUS) += 3c505.o ++obj-$(CONFIG_AC3200) += ac3200.o 8390.o ++obj-$(CONFIG_APRICOT) += 82596.o ++obj-$(CONFIG_LASI_82596) += lasi_82596.o ++obj-$(CONFIG_MVME16x_NET) += 82596.o ++obj-$(CONFIG_BVME6000_NET) += 82596.o ++obj-$(CONFIG_SC92031) += sc92031.o ++ ++# This is also a 82596 and should probably be merged ++obj-$(CONFIG_LP486E) += lp486e.o ++ ++obj-$(CONFIG_ETH16I) += eth16i.o ++obj-$(CONFIG_ZORRO8390) += zorro8390.o ++obj-$(CONFIG_HPLANCE) += hplance.o 7990.o ++obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o ++obj-$(CONFIG_EQUALIZER) += eql.o ++obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o ++obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o ++obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o ++obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o ++obj-$(CONFIG_DECLANCE) += declance.o ++obj-$(CONFIG_ATARILANCE) += atarilance.o ++obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o ++obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o ++obj-$(CONFIG_A2065) += a2065.o ++obj-$(CONFIG_HYDRA) += hydra.o ++obj-$(CONFIG_ARIADNE) += ariadne.o ++obj-$(CONFIG_CS89x0) += cs89x0.o ++obj-$(CONFIG_MACSONIC) += macsonic.o ++obj-$(CONFIG_MACMACE) += macmace.o ++obj-$(CONFIG_MAC89x0) += mac89x0.o ++obj-$(CONFIG_TUN) += tun.o ++obj-$(CONFIG_NET_NETX) += netx-eth.o ++obj-$(CONFIG_DL2K) += dl2k.o ++obj-$(CONFIG_R8169) += r8169.o ++obj-$(CONFIG_AMD8111_ETH) += amd8111e.o ++obj-$(CONFIG_IBMVETH) += ibmveth.o ++obj-$(CONFIG_S2IO) += s2io.o ++obj-$(CONFIG_MYRI10GE) += myri10ge/ ++obj-$(CONFIG_SMC91X) += smc91x.o ++obj-$(CONFIG_SMC911X) += smc911x.o ++obj-$(CONFIG_DM9000) += dm9000.o ++obj-$(CONFIG_FEC_8XX) += fec_8xx/ ++obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o ++ ++obj-$(CONFIG_MACB) += macb.o ++ ++obj-$(CONFIG_ARM) += arm/ ++obj-$(CONFIG_DEV_APPLETALK) += appletalk/ ++obj-$(CONFIG_TR) += tokenring/ ++obj-$(CONFIG_WAN) += wan/ ++obj-$(CONFIG_ARCNET) += arcnet/ ++obj-$(CONFIG_NET_PCMCIA) += pcmcia/ ++obj-$(CONFIG_NET_RADIO) += wireless/ ++obj-$(CONFIG_NET_TULIP) += tulip/ ++obj-$(CONFIG_HAMRADIO) += hamradio/ ++obj-$(CONFIG_IRDA) += irda/ ++obj-$(CONFIG_ETRAX_ETHERNET) += cris/ ++obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ ++ ++obj-$(CONFIG_NETCONSOLE) += netconsole.o ++ ++obj-$(CONFIG_FS_ENET) += fs_enet/ ++ ++obj-$(CONFIG_NETXEN_NIC) += netxen/ +diff -Nur linux-2.6.21.1/drivers/net/natsemi.c linux-2.6.21.1-owrt/drivers/net/natsemi.c +--- linux-2.6.21.1/drivers/net/natsemi.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/net/natsemi.c 2007-05-23 23:34:01.000000000 +0200 +@@ -656,6 +656,49 @@ static int netdev_get_eeprom(struct net_device *dev, u8 *buf); - static struct ethtool_ops ethtool_ops; + static const struct ethtool_ops ethtool_ops; +#ifdef CONFIG_MACH_ARUBA + @@ -118,7 +3960,7 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse static inline void __iomem *ns_ioaddr(struct net_device *dev) { return (void __iomem *) dev->base_addr; -@@ -871,6 +914,7 @@ +@@ -794,6 +837,7 @@ goto err_ioremap; } @@ -126,7 +3968,7 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse /* Work around the dropped serial bit. */ prev_eedata = eeprom_read(ioaddr, 6); for (i = 0; i < 3; i++) { -@@ -879,6 +923,19 @@ +@@ -802,6 +846,19 @@ dev->dev_addr[i*2+1] = eedata >> 7; prev_eedata = eedata; } @@ -146,12 +3988,4877 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse dev->base_addr = (unsigned long __force) ioaddr; dev->irq = irq; -diff -Nur linux-2.6.17/include/asm-mips/bootinfo.h linux-2.6.17-owrt/include/asm-mips/bootinfo.h ---- linux-2.6.17/include/asm-mips/bootinfo.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/include/asm-mips/bootinfo.h 2006-06-18 12:44:28.000000000 +0200 -@@ -218,6 +218,17 @@ - #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ - #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ +diff -Nur linux-2.6.21.1/drivers/pci/access.c linux-2.6.21.1-owrt/drivers/pci/access.c +--- linux-2.6.21.1/drivers/pci/access.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/pci/access.c 2007-05-23 23:36:48.000000000 +0200 +@@ -23,6 +23,7 @@ + #define PCI_word_BAD (pos & 1) + #define PCI_dword_BAD (pos & 3) + ++#ifdef __MIPSEB__ + #define PCI_OP_READ(size,type,len) \ + int pci_bus_read_config_##size \ + (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ +@@ -33,11 +34,32 @@ + if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ + spin_lock_irqsave(&pci_lock, flags); \ + res = bus->ops->read(bus, devfn, pos, len, &data); \ ++ if (len == 1) \ ++ *value = (type)((data >> 24) & 0xff); \ ++ else if (len == 2) \ ++ *value = (type)((data >> 16) & 0xffff); \ ++ else \ + *value = (type)data; \ + spin_unlock_irqrestore(&pci_lock, flags); \ + return res; \ + } ++#else + ++#define PCI_OP_READ(size,type,len) \ ++int pci_bus_read_config_##size \ ++ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ ++{ \ ++ int res; \ ++ unsigned long flags; \ ++ u32 data = 0; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irqsave(&pci_lock, flags); \ ++ res = bus->ops->read(bus, devfn, pos, len, &data); \ ++ *value = (type)data; \ ++ spin_unlock_irqrestore(&pci_lock, flags); \ ++ return res; \ ++} ++#endif + #define PCI_OP_WRITE(size,type,len) \ + int pci_bus_write_config_##size \ + (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ +diff -Nur linux-2.6.21.1/drivers/pci/access.c.orig linux-2.6.21.1-owrt/drivers/pci/access.c.orig +--- linux-2.6.21.1/drivers/pci/access.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/pci/access.c.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,173 @@ ++#include <linux/pci.h> ++#include <linux/module.h> ++#include <linux/sched.h> ++#include <linux/ioport.h> ++#include <linux/wait.h> ++ ++#include "pci.h" ++ ++/* ++ * This interrupt-safe spinlock protects all accesses to PCI ++ * configuration space. ++ */ ++ ++static DEFINE_SPINLOCK(pci_lock); ++ ++/* ++ * Wrappers for all PCI configuration access functions. They just check ++ * alignment, do locking and call the low-level functions pointed to ++ * by pci_dev->ops. ++ */ ++ ++#define PCI_byte_BAD 0 ++#define PCI_word_BAD (pos & 1) ++#define PCI_dword_BAD (pos & 3) ++ ++#define PCI_OP_READ(size,type,len) \ ++int pci_bus_read_config_##size \ ++ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ ++{ \ ++ int res; \ ++ unsigned long flags; \ ++ u32 data = 0; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irqsave(&pci_lock, flags); \ ++ res = bus->ops->read(bus, devfn, pos, len, &data); \ ++ *value = (type)data; \ ++ spin_unlock_irqrestore(&pci_lock, flags); \ ++ return res; \ ++} ++ ++#define PCI_OP_WRITE(size,type,len) \ ++int pci_bus_write_config_##size \ ++ (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ ++{ \ ++ int res; \ ++ unsigned long flags; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irqsave(&pci_lock, flags); \ ++ res = bus->ops->write(bus, devfn, pos, len, value); \ ++ spin_unlock_irqrestore(&pci_lock, flags); \ ++ return res; \ ++} ++ ++PCI_OP_READ(byte, u8, 1) ++PCI_OP_READ(word, u16, 2) ++PCI_OP_READ(dword, u32, 4) ++PCI_OP_WRITE(byte, u8, 1) ++PCI_OP_WRITE(word, u16, 2) ++PCI_OP_WRITE(dword, u32, 4) ++ ++EXPORT_SYMBOL(pci_bus_read_config_byte); ++EXPORT_SYMBOL(pci_bus_read_config_word); ++EXPORT_SYMBOL(pci_bus_read_config_dword); ++EXPORT_SYMBOL(pci_bus_write_config_byte); ++EXPORT_SYMBOL(pci_bus_write_config_word); ++EXPORT_SYMBOL(pci_bus_write_config_dword); ++ ++/* ++ * The following routines are to prevent the user from accessing PCI config ++ * space when it's unsafe to do so. Some devices require this during BIST and ++ * we're required to prevent it during D-state transitions. ++ * ++ * We have a bit per device to indicate it's blocked and a global wait queue ++ * for callers to sleep on until devices are unblocked. ++ */ ++static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); ++ ++static noinline void pci_wait_ucfg(struct pci_dev *dev) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ ++ __add_wait_queue(&pci_ucfg_wait, &wait); ++ do { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ spin_unlock_irq(&pci_lock); ++ schedule(); ++ spin_lock_irq(&pci_lock); ++ } while (dev->block_ucfg_access); ++ __remove_wait_queue(&pci_ucfg_wait, &wait); ++} ++ ++#define PCI_USER_READ_CONFIG(size,type) \ ++int pci_user_read_config_##size \ ++ (struct pci_dev *dev, int pos, type *val) \ ++{ \ ++ int ret = 0; \ ++ u32 data = -1; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irq(&pci_lock); \ ++ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ ++ ret = dev->bus->ops->read(dev->bus, dev->devfn, \ ++ pos, sizeof(type), &data); \ ++ spin_unlock_irq(&pci_lock); \ ++ *val = (type)data; \ ++ return ret; \ ++} ++ ++#define PCI_USER_WRITE_CONFIG(size,type) \ ++int pci_user_write_config_##size \ ++ (struct pci_dev *dev, int pos, type val) \ ++{ \ ++ int ret = -EIO; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irq(&pci_lock); \ ++ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ ++ ret = dev->bus->ops->write(dev->bus, dev->devfn, \ ++ pos, sizeof(type), val); \ ++ spin_unlock_irq(&pci_lock); \ ++ return ret; \ ++} ++ ++PCI_USER_READ_CONFIG(byte, u8) ++PCI_USER_READ_CONFIG(word, u16) ++PCI_USER_READ_CONFIG(dword, u32) ++PCI_USER_WRITE_CONFIG(byte, u8) ++PCI_USER_WRITE_CONFIG(word, u16) ++PCI_USER_WRITE_CONFIG(dword, u32) ++ ++/** ++ * pci_block_user_cfg_access - Block userspace PCI config reads/writes ++ * @dev: pci device struct ++ * ++ * When user access is blocked, any reads or writes to config space will ++ * sleep until access is unblocked again. We don't allow nesting of ++ * block/unblock calls. ++ */ ++void pci_block_user_cfg_access(struct pci_dev *dev) ++{ ++ unsigned long flags; ++ int was_blocked; ++ ++ spin_lock_irqsave(&pci_lock, flags); ++ was_blocked = dev->block_ucfg_access; ++ dev->block_ucfg_access = 1; ++ spin_unlock_irqrestore(&pci_lock, flags); ++ ++ /* If we BUG() inside the pci_lock, we're guaranteed to hose ++ * the machine */ ++ BUG_ON(was_blocked); ++} ++EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); ++ ++/** ++ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes ++ * @dev: pci device struct ++ * ++ * This function allows userspace PCI config accesses to resume. ++ */ ++void pci_unblock_user_cfg_access(struct pci_dev *dev) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&pci_lock, flags); ++ ++ /* This indicates a problem in the caller, but we don't need ++ * to kill them, unlike a double-block above. */ ++ WARN_ON(!dev->block_ucfg_access); ++ ++ dev->block_ucfg_access = 0; ++ wake_up_all(&pci_ucfg_wait); ++ spin_unlock_irqrestore(&pci_lock, flags); ++} ++EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); +diff -Nur linux-2.6.21.1/drivers/serial/8250.c linux-2.6.21.1-owrt/drivers/serial/8250.c +--- linux-2.6.21.1/drivers/serial/8250.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/serial/8250.c 2007-05-23 23:37:11.000000000 +0200 +@@ -1635,7 +1635,7 @@ + { + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; +- unsigned char lsr, iir; ++// unsigned char lsr, iir; + int retval; + + up->capabilities = uart_config[up->port.type].flags; +@@ -1772,6 +1772,8 @@ + + serial8250_set_mctrl(&up->port, up->port.mctrl); + ++// For some reason this test causes problems on the AP6x serial console ++#if 0 + /* + * Do a quick test to see if we receive an + * interrupt when we enable the TX irq. +@@ -1790,7 +1792,8 @@ + } else { + up->bugs &= ~UART_BUG_TXEN; + } +- ++#endif ++ + spin_unlock_irqrestore(&up->port.lock, flags); + + /* +diff -Nur linux-2.6.21.1/drivers/serial/8250.c.orig linux-2.6.21.1-owrt/drivers/serial/8250.c.orig +--- linux-2.6.21.1/drivers/serial/8250.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/serial/8250.c.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,2817 @@ ++/* ++ * linux/drivers/char/8250.c ++ * ++ * Driver for 8250/16550-type serial ports ++ * ++ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. ++ * ++ * Copyright (C) 2001 Russell King. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $ ++ * ++ * A note about mapbase / membase ++ * ++ * mapbase is the physical address of the IO port. ++ * membase is an 'ioremapped' cookie. ++ */ ++ ++#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/ioport.h> ++#include <linux/init.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/serial_reg.h> ++#include <linux/serial_core.h> ++#include <linux/serial.h> ++#include <linux/serial_8250.h> ++#include <linux/nmi.h> ++#include <linux/mutex.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++#include "8250.h" ++ ++/* ++ * Configuration: ++ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option ++ * is unsafe when used on edge-triggered interrupts. ++ */ ++static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; ++ ++static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; ++ ++/* ++ * Debugging. ++ */ ++#if 0 ++#define DEBUG_AUTOCONF(fmt...) printk(fmt) ++#else ++#define DEBUG_AUTOCONF(fmt...) do { } while (0) ++#endif ++ ++#if 0 ++#define DEBUG_INTR(fmt...) printk(fmt) ++#else ++#define DEBUG_INTR(fmt...) do { } while (0) ++#endif ++ ++#define PASS_LIMIT 256 ++ ++/* ++ * We default to IRQ0 for the "no irq" hack. Some ++ * machine types want others as well - they're free ++ * to redefine this in their header file. ++ */ ++#define is_real_interrupt(irq) ((irq) != 0) ++ ++#ifdef CONFIG_SERIAL_8250_DETECT_IRQ ++#define CONFIG_SERIAL_DETECT_IRQ 1 ++#endif ++#ifdef CONFIG_SERIAL_8250_MANY_PORTS ++#define CONFIG_SERIAL_MANY_PORTS 1 ++#endif ++ ++/* ++ * HUB6 is always on. This will be removed once the header ++ * files have been cleaned. ++ */ ++#define CONFIG_HUB6 1 ++ ++#include <asm/serial.h> ++ ++/* ++ * SERIAL_PORT_DFNS tells us about built-in ports that have no ++ * standard enumeration mechanism. Platforms that can find all ++ * serial ports via mechanisms like ACPI or PCI need not supply it. ++ */ ++#ifndef SERIAL_PORT_DFNS ++#define SERIAL_PORT_DFNS ++#endif ++ ++static const struct old_serial_port old_serial_port[] = { ++ SERIAL_PORT_DFNS /* defined in asm/serial.h */ ++}; ++ ++#define UART_NR CONFIG_SERIAL_8250_NR_UARTS ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++ ++#define PORT_RSA_MAX 4 ++static unsigned long probe_rsa[PORT_RSA_MAX]; ++static unsigned int probe_rsa_count; ++#endif /* CONFIG_SERIAL_8250_RSA */ ++ ++struct uart_8250_port { ++ struct uart_port port; ++ struct timer_list timer; /* "no irq" timer */ ++ struct list_head list; /* ports on this IRQ */ ++ unsigned short capabilities; /* port capabilities */ ++ unsigned short bugs; /* port bugs */ ++ unsigned int tx_loadsz; /* transmit fifo load size */ ++ unsigned char acr; ++ unsigned char ier; ++ unsigned char lcr; ++ unsigned char mcr; ++ unsigned char mcr_mask; /* mask of user bits */ ++ unsigned char mcr_force; /* mask of forced bits */ ++ unsigned char lsr_break_flag; ++ ++ /* ++ * We provide a per-port pm hook. ++ */ ++ void (*pm)(struct uart_port *port, ++ unsigned int state, unsigned int old); ++}; ++ ++struct irq_info { ++ spinlock_t lock; ++ struct list_head *head; ++}; ++ ++static struct irq_info irq_lists[NR_IRQS]; ++ ++/* ++ * Here we define the default xmit fifo size used for each type of UART. ++ */ ++static const struct serial8250_config uart_config[] = { ++ [PORT_UNKNOWN] = { ++ .name = "unknown", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_8250] = { ++ .name = "8250", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_16450] = { ++ .name = "16450", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_16550] = { ++ .name = "16550", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_16550A] = { ++ .name = "16550A", ++ .fifo_size = 16, ++ .tx_loadsz = 16, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, ++ .flags = UART_CAP_FIFO, ++ }, ++ [PORT_CIRRUS] = { ++ .name = "Cirrus", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_16650] = { ++ .name = "ST16650", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, ++ }, ++ [PORT_16650V2] = { ++ .name = "ST16650V2", ++ .fifo_size = 32, ++ .tx_loadsz = 16, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | ++ UART_FCR_T_TRIG_00, ++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, ++ }, ++ [PORT_16750] = { ++ .name = "TI16750", ++ .fifo_size = 64, ++ .tx_loadsz = 64, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | ++ UART_FCR7_64BYTE, ++ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, ++ }, ++ [PORT_STARTECH] = { ++ .name = "Startech", ++ .fifo_size = 1, ++ .tx_loadsz = 1, ++ }, ++ [PORT_16C950] = { ++ .name = "16C950/954", ++ .fifo_size = 128, ++ .tx_loadsz = 128, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, ++ .flags = UART_CAP_FIFO, ++ }, ++ [PORT_16654] = { ++ .name = "ST16654", ++ .fifo_size = 64, ++ .tx_loadsz = 32, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | ++ UART_FCR_T_TRIG_10, ++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, ++ }, ++ [PORT_16850] = { ++ .name = "XR16850", ++ .fifo_size = 128, ++ .tx_loadsz = 128, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, ++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, ++ }, ++ [PORT_RSA] = { ++ .name = "RSA", ++ .fifo_size = 2048, ++ .tx_loadsz = 2048, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, ++ .flags = UART_CAP_FIFO, ++ }, ++ [PORT_NS16550A] = { ++ .name = "NS16550A", ++ .fifo_size = 16, ++ .tx_loadsz = 16, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, ++ .flags = UART_CAP_FIFO | UART_NATSEMI, ++ }, ++ [PORT_XSCALE] = { ++ .name = "XScale", ++ .fifo_size = 32, ++ .tx_loadsz = 32, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, ++ .flags = UART_CAP_FIFO | UART_CAP_UUE, ++ }, ++}; ++ ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++ ++/* Au1x00 UART hardware has a weird register layout */ ++static const u8 au_io_in_map[] = { ++ [UART_RX] = 0, ++ [UART_IER] = 2, ++ [UART_IIR] = 3, ++ [UART_LCR] = 5, ++ [UART_MCR] = 6, ++ [UART_LSR] = 7, ++ [UART_MSR] = 8, ++}; ++ ++static const u8 au_io_out_map[] = { ++ [UART_TX] = 1, ++ [UART_IER] = 2, ++ [UART_FCR] = 4, ++ [UART_LCR] = 5, ++ [UART_MCR] = 6, ++}; ++ ++/* sane hardware needs no mapping */ ++static inline int map_8250_in_reg(struct uart_8250_port *up, int offset) ++{ ++ if (up->port.iotype != UPIO_AU) ++ return offset; ++ return au_io_in_map[offset]; ++} ++ ++static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) ++{ ++ if (up->port.iotype != UPIO_AU) ++ return offset; ++ return au_io_out_map[offset]; ++} ++ ++#else ++ ++/* sane hardware needs no mapping */ ++#define map_8250_in_reg(up, offset) (offset) ++#define map_8250_out_reg(up, offset) (offset) ++ ++#endif ++ ++static unsigned int serial_in(struct uart_8250_port *up, int offset) ++{ ++ unsigned int tmp; ++ offset = map_8250_in_reg(up, offset) << up->port.regshift; ++ ++ switch (up->port.iotype) { ++ case UPIO_HUB6: ++ outb(up->port.hub6 - 1 + offset, up->port.iobase); ++ return inb(up->port.iobase + 1); ++ ++ case UPIO_MEM: ++ return readb(up->port.membase + offset); ++ ++ case UPIO_MEM32: ++ return readl(up->port.membase + offset); ++ ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++ case UPIO_AU: ++ return __raw_readl(up->port.membase + offset); ++#endif ++ ++ case UPIO_TSI: ++ if (offset == UART_IIR) { ++ tmp = readl(up->port.membase + (UART_IIR & ~3)); ++ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ ++ } else ++ return readb(up->port.membase + offset); ++ ++ default: ++ return inb(up->port.iobase + offset); ++ } ++} ++ ++static void ++serial_out(struct uart_8250_port *up, int offset, int value) ++{ ++ offset = map_8250_out_reg(up, offset) << up->port.regshift; ++ ++ switch (up->port.iotype) { ++ case UPIO_HUB6: ++ outb(up->port.hub6 - 1 + offset, up->port.iobase); ++ outb(value, up->port.iobase + 1); ++ break; ++ ++ case UPIO_MEM: ++ writeb(value, up->port.membase + offset); ++ break; ++ ++ case UPIO_MEM32: ++ writel(value, up->port.membase + offset); ++ break; ++ ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++ case UPIO_AU: ++ __raw_writel(value, up->port.membase + offset); ++ break; ++#endif ++ case UPIO_TSI: ++ if (!((offset == UART_IER) && (value & UART_IER_UUE))) ++ writeb(value, up->port.membase + offset); ++ break; ++ ++ default: ++ outb(value, up->port.iobase + offset); ++ } ++} ++ ++static void ++serial_out_sync(struct uart_8250_port *up, int offset, int value) ++{ ++ switch (up->port.iotype) { ++ case UPIO_MEM: ++ case UPIO_MEM32: ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++ case UPIO_AU: ++#endif ++ serial_out(up, offset, value); ++ serial_in(up, UART_LCR); /* safe, no side-effects */ ++ break; ++ default: ++ serial_out(up, offset, value); ++ } ++} ++ ++/* ++ * We used to support using pause I/O for certain machines. We ++ * haven't supported this for a while, but just in case it's badly ++ * needed for certain old 386 machines, I've left these #define's ++ * in.... ++ */ ++#define serial_inp(up, offset) serial_in(up, offset) ++#define serial_outp(up, offset, value) serial_out(up, offset, value) ++ ++/* Uart divisor latch read */ ++static inline int _serial_dl_read(struct uart_8250_port *up) ++{ ++ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; ++} ++ ++/* Uart divisor latch write */ ++static inline void _serial_dl_write(struct uart_8250_port *up, int value) ++{ ++ serial_outp(up, UART_DLL, value & 0xff); ++ serial_outp(up, UART_DLM, value >> 8 & 0xff); ++} ++ ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++/* Au1x00 haven't got a standard divisor latch */ ++static int serial_dl_read(struct uart_8250_port *up) ++{ ++ if (up->port.iotype == UPIO_AU) ++ return __raw_readl(up->port.membase + 0x28); ++ else ++ return _serial_dl_read(up); ++} ++ ++static void serial_dl_write(struct uart_8250_port *up, int value) ++{ ++ if (up->port.iotype == UPIO_AU) ++ __raw_writel(value, up->port.membase + 0x28); ++ else ++ _serial_dl_write(up, value); ++} ++#else ++#define serial_dl_read(up) _serial_dl_read(up) ++#define serial_dl_write(up, value) _serial_dl_write(up, value) ++#endif ++ ++/* ++ * For the 16C950 ++ */ ++static void serial_icr_write(struct uart_8250_port *up, int offset, int value) ++{ ++ serial_out(up, UART_SCR, offset); ++ serial_out(up, UART_ICR, value); ++} ++ ++static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) ++{ ++ unsigned int value; ++ ++ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); ++ serial_out(up, UART_SCR, offset); ++ value = serial_in(up, UART_ICR); ++ serial_icr_write(up, UART_ACR, up->acr); ++ ++ return value; ++} ++ ++/* ++ * FIFO support. ++ */ ++static inline void serial8250_clear_fifos(struct uart_8250_port *p) ++{ ++ if (p->capabilities & UART_CAP_FIFO) { ++ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); ++ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); ++ serial_outp(p, UART_FCR, 0); ++ } ++} ++ ++/* ++ * IER sleep support. UARTs which have EFRs need the "extended ++ * capability" bit enabled. Note that on XR16C850s, we need to ++ * reset LCR to write to IER. ++ */ ++static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep) ++{ ++ if (p->capabilities & UART_CAP_SLEEP) { ++ if (p->capabilities & UART_CAP_EFR) { ++ serial_outp(p, UART_LCR, 0xBF); ++ serial_outp(p, UART_EFR, UART_EFR_ECB); ++ serial_outp(p, UART_LCR, 0); ++ } ++ serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); ++ if (p->capabilities & UART_CAP_EFR) { ++ serial_outp(p, UART_LCR, 0xBF); ++ serial_outp(p, UART_EFR, 0); ++ serial_outp(p, UART_LCR, 0); ++ } ++ } ++} ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++/* ++ * Attempts to turn on the RSA FIFO. Returns zero on failure. ++ * We set the port uart clock rate if we succeed. ++ */ ++static int __enable_rsa(struct uart_8250_port *up) ++{ ++ unsigned char mode; ++ int result; ++ ++ mode = serial_inp(up, UART_RSA_MSR); ++ result = mode & UART_RSA_MSR_FIFO; ++ ++ if (!result) { ++ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); ++ mode = serial_inp(up, UART_RSA_MSR); ++ result = mode & UART_RSA_MSR_FIFO; ++ } ++ ++ if (result) ++ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; ++ ++ return result; ++} ++ ++static void enable_rsa(struct uart_8250_port *up) ++{ ++ if (up->port.type == PORT_RSA) { ++ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { ++ spin_lock_irq(&up->port.lock); ++ __enable_rsa(up); ++ spin_unlock_irq(&up->port.lock); ++ } ++ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) ++ serial_outp(up, UART_RSA_FRR, 0); ++ } ++} ++ ++/* ++ * Attempts to turn off the RSA FIFO. Returns zero on failure. ++ * It is unknown why interrupts were disabled in here. However, ++ * the caller is expected to preserve this behaviour by grabbing ++ * the spinlock before calling this function. ++ */ ++static void disable_rsa(struct uart_8250_port *up) ++{ ++ unsigned char mode; ++ int result; ++ ++ if (up->port.type == PORT_RSA && ++ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { ++ spin_lock_irq(&up->port.lock); ++ ++ mode = serial_inp(up, UART_RSA_MSR); ++ result = !(mode & UART_RSA_MSR_FIFO); ++ ++ if (!result) { ++ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); ++ mode = serial_inp(up, UART_RSA_MSR); ++ result = !(mode & UART_RSA_MSR_FIFO); ++ } ++ ++ if (result) ++ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; ++ spin_unlock_irq(&up->port.lock); ++ } ++} ++#endif /* CONFIG_SERIAL_8250_RSA */ ++ ++/* ++ * This is a quickie test to see how big the FIFO is. ++ * It doesn't work at all the time, more's the pity. ++ */ ++static int size_fifo(struct uart_8250_port *up) ++{ ++ unsigned char old_fcr, old_mcr, old_lcr; ++ unsigned short old_dl; ++ int count; ++ ++ old_lcr = serial_inp(up, UART_LCR); ++ serial_outp(up, UART_LCR, 0); ++ old_fcr = serial_inp(up, UART_FCR); ++ old_mcr = serial_inp(up, UART_MCR); ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); ++ serial_outp(up, UART_MCR, UART_MCR_LOOP); ++ serial_outp(up, UART_LCR, UART_LCR_DLAB); ++ old_dl = serial_dl_read(up); ++ serial_dl_write(up, 0x0001); ++ serial_outp(up, UART_LCR, 0x03); ++ for (count = 0; count < 256; count++) ++ serial_outp(up, UART_TX, count); ++ mdelay(20);/* FIXME - schedule_timeout */ ++ for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && ++ (count < 256); count++) ++ serial_inp(up, UART_RX); ++ serial_outp(up, UART_FCR, old_fcr); ++ serial_outp(up, UART_MCR, old_mcr); ++ serial_outp(up, UART_LCR, UART_LCR_DLAB); ++ serial_dl_write(up, old_dl); ++ serial_outp(up, UART_LCR, old_lcr); ++ ++ return count; ++} ++ ++/* ++ * Read UART ID using the divisor method - set DLL and DLM to zero ++ * and the revision will be in DLL and device type in DLM. We ++ * preserve the device state across this. ++ */ ++static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) ++{ ++ unsigned char old_dll, old_dlm, old_lcr; ++ unsigned int id; ++ ++ old_lcr = serial_inp(p, UART_LCR); ++ serial_outp(p, UART_LCR, UART_LCR_DLAB); ++ ++ old_dll = serial_inp(p, UART_DLL); ++ old_dlm = serial_inp(p, UART_DLM); ++ ++ serial_outp(p, UART_DLL, 0); ++ serial_outp(p, UART_DLM, 0); ++ ++ id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; ++ ++ serial_outp(p, UART_DLL, old_dll); ++ serial_outp(p, UART_DLM, old_dlm); ++ serial_outp(p, UART_LCR, old_lcr); ++ ++ return id; ++} ++ ++/* ++ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. ++ * When this function is called we know it is at least a StarTech ++ * 16650 V2, but it might be one of several StarTech UARTs, or one of ++ * its clones. (We treat the broken original StarTech 16650 V1 as a ++ * 16550, and why not? Startech doesn't seem to even acknowledge its ++ * existence.) ++ * ++ * What evil have men's minds wrought... ++ */ ++static void autoconfig_has_efr(struct uart_8250_port *up) ++{ ++ unsigned int id1, id2, id3, rev; ++ ++ /* ++ * Everything with an EFR has SLEEP ++ */ ++ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; ++ ++ /* ++ * First we check to see if it's an Oxford Semiconductor UART. ++ * ++ * If we have to do this here because some non-National ++ * Semiconductor clone chips lock up if you try writing to the ++ * LSR register (which serial_icr_read does) ++ */ ++ ++ /* ++ * Check for Oxford Semiconductor 16C950. ++ * ++ * EFR [4] must be set else this test fails. ++ * ++ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) ++ * claims that it's needed for 952 dual UART's (which are not ++ * recommended for new designs). ++ */ ++ up->acr = 0; ++ serial_out(up, UART_LCR, 0xBF); ++ serial_out(up, UART_EFR, UART_EFR_ECB); ++ serial_out(up, UART_LCR, 0x00); ++ id1 = serial_icr_read(up, UART_ID1); ++ id2 = serial_icr_read(up, UART_ID2); ++ id3 = serial_icr_read(up, UART_ID3); ++ rev = serial_icr_read(up, UART_REV); ++ ++ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); ++ ++ if (id1 == 0x16 && id2 == 0xC9 && ++ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { ++ up->port.type = PORT_16C950; ++ ++ /* ++ * Enable work around for the Oxford Semiconductor 952 rev B ++ * chip which causes it to seriously miscalculate baud rates ++ * when DLL is 0. ++ */ ++ if (id3 == 0x52 && rev == 0x01) ++ up->bugs |= UART_BUG_QUOT; ++ return; ++ } ++ ++ /* ++ * We check for a XR16C850 by setting DLL and DLM to 0, and then ++ * reading back DLL and DLM. The chip type depends on the DLM ++ * value read back: ++ * 0x10 - XR16C850 and the DLL contains the chip revision. ++ * 0x12 - XR16C2850. ++ * 0x14 - XR16C854. ++ */ ++ id1 = autoconfig_read_divisor_id(up); ++ DEBUG_AUTOCONF("850id=%04x ", id1); ++ ++ id2 = id1 >> 8; ++ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { ++ up->port.type = PORT_16850; ++ return; ++ } ++ ++ /* ++ * It wasn't an XR16C850. ++ * ++ * We distinguish between the '654 and the '650 by counting ++ * how many bytes are in the FIFO. I'm using this for now, ++ * since that's the technique that was sent to me in the ++ * serial driver update, but I'm not convinced this works. ++ * I've had problems doing this in the past. -TYT ++ */ ++ if (size_fifo(up) == 64) ++ up->port.type = PORT_16654; ++ else ++ up->port.type = PORT_16650V2; ++} ++ ++/* ++ * We detected a chip without a FIFO. Only two fall into ++ * this category - the original 8250 and the 16450. The ++ * 16450 has a scratch register (accessible with LCR=0) ++ */ ++static void autoconfig_8250(struct uart_8250_port *up) ++{ ++ unsigned char scratch, status1, status2; ++ ++ up->port.type = PORT_8250; ++ ++ scratch = serial_in(up, UART_SCR); ++ serial_outp(up, UART_SCR, 0xa5); ++ status1 = serial_in(up, UART_SCR); ++ serial_outp(up, UART_SCR, 0x5a); ++ status2 = serial_in(up, UART_SCR); ++ serial_outp(up, UART_SCR, scratch); ++ ++ if (status1 == 0xa5 && status2 == 0x5a) ++ up->port.type = PORT_16450; ++} ++ ++static int broken_efr(struct uart_8250_port *up) ++{ ++ /* ++ * Exar ST16C2550 "A2" devices incorrectly detect as ++ * having an EFR, and report an ID of 0x0201. See ++ * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf ++ */ ++ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) ++ return 1; ++ ++ return 0; ++} ++ ++/* ++ * We know that the chip has FIFOs. Does it have an EFR? The ++ * EFR is located in the same register position as the IIR and ++ * we know the top two bits of the IIR are currently set. The ++ * EFR should contain zero. Try to read the EFR. ++ */ ++static void autoconfig_16550a(struct uart_8250_port *up) ++{ ++ unsigned char status1, status2; ++ unsigned int iersave; ++ ++ up->port.type = PORT_16550A; ++ up->capabilities |= UART_CAP_FIFO; ++ ++ /* ++ * Check for presence of the EFR when DLAB is set. ++ * Only ST16C650V1 UARTs pass this test. ++ */ ++ serial_outp(up, UART_LCR, UART_LCR_DLAB); ++ if (serial_in(up, UART_EFR) == 0) { ++ serial_outp(up, UART_EFR, 0xA8); ++ if (serial_in(up, UART_EFR) != 0) { ++ DEBUG_AUTOCONF("EFRv1 "); ++ up->port.type = PORT_16650; ++ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; ++ } else { ++ DEBUG_AUTOCONF("Motorola 8xxx DUART "); ++ } ++ serial_outp(up, UART_EFR, 0); ++ return; ++ } ++ ++ /* ++ * Maybe it requires 0xbf to be written to the LCR. ++ * (other ST16C650V2 UARTs, TI16C752A, etc) ++ */ ++ serial_outp(up, UART_LCR, 0xBF); ++ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { ++ DEBUG_AUTOCONF("EFRv2 "); ++ autoconfig_has_efr(up); ++ return; ++ } ++ ++ /* ++ * Check for a National Semiconductor SuperIO chip. ++ * Attempt to switch to bank 2, read the value of the LOOP bit ++ * from EXCR1. Switch back to bank 0, change it in MCR. Then ++ * switch back to bank 2, read it from EXCR1 again and check ++ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 ++ */ ++ serial_outp(up, UART_LCR, 0); ++ status1 = serial_in(up, UART_MCR); ++ serial_outp(up, UART_LCR, 0xE0); ++ status2 = serial_in(up, 0x02); /* EXCR1 */ ++ ++ if (!((status2 ^ status1) & UART_MCR_LOOP)) { ++ serial_outp(up, UART_LCR, 0); ++ serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); ++ serial_outp(up, UART_LCR, 0xE0); ++ status2 = serial_in(up, 0x02); /* EXCR1 */ ++ serial_outp(up, UART_LCR, 0); ++ serial_outp(up, UART_MCR, status1); ++ ++ if ((status2 ^ status1) & UART_MCR_LOOP) { ++ unsigned short quot; ++ ++ serial_outp(up, UART_LCR, 0xE0); ++ ++ quot = serial_dl_read(up); ++ quot <<= 3; ++ ++ status1 = serial_in(up, 0x04); /* EXCR1 */ ++ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ ++ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ ++ serial_outp(up, 0x04, status1); ++ ++ serial_dl_write(up, quot); ++ ++ serial_outp(up, UART_LCR, 0); ++ ++ up->port.uartclk = 921600*16; ++ up->port.type = PORT_NS16550A; ++ up->capabilities |= UART_NATSEMI; ++ return; ++ } ++ } ++ ++ /* ++ * No EFR. Try to detect a TI16750, which only sets bit 5 of ++ * the IIR when 64 byte FIFO mode is enabled when DLAB is set. ++ * Try setting it with and without DLAB set. Cheap clones ++ * set bit 5 without DLAB set. ++ */ ++ serial_outp(up, UART_LCR, 0); ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); ++ status1 = serial_in(up, UART_IIR) >> 5; ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); ++ serial_outp(up, UART_LCR, UART_LCR_DLAB); ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); ++ status2 = serial_in(up, UART_IIR) >> 5; ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); ++ serial_outp(up, UART_LCR, 0); ++ ++ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); ++ ++ if (status1 == 6 && status2 == 7) { ++ up->port.type = PORT_16750; ++ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; ++ return; ++ } ++ ++ /* ++ * Try writing and reading the UART_IER_UUE bit (b6). ++ * If it works, this is probably one of the Xscale platform's ++ * internal UARTs. ++ * We're going to explicitly set the UUE bit to 0 before ++ * trying to write and read a 1 just to make sure it's not ++ * already a 1 and maybe locked there before we even start start. ++ */ ++ iersave = serial_in(up, UART_IER); ++ serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); ++ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { ++ /* ++ * OK it's in a known zero state, try writing and reading ++ * without disturbing the current state of the other bits. ++ */ ++ serial_outp(up, UART_IER, iersave | UART_IER_UUE); ++ if (serial_in(up, UART_IER) & UART_IER_UUE) { ++ /* ++ * It's an Xscale. ++ * We'll leave the UART_IER_UUE bit set to 1 (enabled). ++ */ ++ DEBUG_AUTOCONF("Xscale "); ++ up->port.type = PORT_XSCALE; ++ up->capabilities |= UART_CAP_UUE; ++ return; ++ } ++ } else { ++ /* ++ * If we got here we couldn't force the IER_UUE bit to 0. ++ * Log it and continue. ++ */ ++ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); ++ } ++ serial_outp(up, UART_IER, iersave); ++} ++ ++/* ++ * This routine is called by rs_init() to initialize a specific serial ++ * port. It determines what type of UART chip this serial port is ++ * using: 8250, 16450, 16550, 16550A. The important question is ++ * whether or not this UART is a 16550A or not, since this will ++ * determine whether or not we can use its FIFO features or not. ++ */ ++static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) ++{ ++ unsigned char status1, scratch, scratch2, scratch3; ++ unsigned char save_lcr, save_mcr; ++ unsigned long flags; ++ ++ if (!up->port.iobase && !up->port.mapbase && !up->port.membase) ++ return; ++ ++ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", ++ up->port.line, up->port.iobase, up->port.membase); ++ ++ /* ++ * We really do need global IRQs disabled here - we're going to ++ * be frobbing the chips IRQ enable register to see if it exists. ++ */ ++ spin_lock_irqsave(&up->port.lock, flags); ++// save_flags(flags); cli(); ++ ++ up->capabilities = 0; ++ up->bugs = 0; ++ ++ if (!(up->port.flags & UPF_BUGGY_UART)) { ++ /* ++ * Do a simple existence test first; if we fail this, ++ * there's no point trying anything else. ++ * ++ * 0x80 is used as a nonsense port to prevent against ++ * false positives due to ISA bus float. The ++ * assumption is that 0x80 is a non-existent port; ++ * which should be safe since include/asm/io.h also ++ * makes this assumption. ++ * ++ * Note: this is safe as long as MCR bit 4 is clear ++ * and the device is in "PC" mode. ++ */ ++ scratch = serial_inp(up, UART_IER); ++ serial_outp(up, UART_IER, 0); ++#ifdef __i386__ ++ outb(0xff, 0x080); ++#endif ++ /* ++ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL ++ * 16C754B) allow only to modify them if an EFR bit is set. ++ */ ++ scratch2 = serial_inp(up, UART_IER) & 0x0f; ++ serial_outp(up, UART_IER, 0x0F); ++#ifdef __i386__ ++ outb(0, 0x080); ++#endif ++ scratch3 = serial_inp(up, UART_IER) & 0x0f; ++ serial_outp(up, UART_IER, scratch); ++ if (scratch2 != 0 || scratch3 != 0x0F) { ++ /* ++ * We failed; there's nothing here ++ */ ++ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", ++ scratch2, scratch3); ++ goto out; ++ } ++ } ++ ++ save_mcr = serial_in(up, UART_MCR); ++ save_lcr = serial_in(up, UART_LCR); ++ ++ /* ++ * Check to see if a UART is really there. Certain broken ++ * internal modems based on the Rockwell chipset fail this ++ * test, because they apparently don't implement the loopback ++ * test mode. So this test is skipped on the COM 1 through ++ * COM 4 ports. This *should* be safe, since no board ++ * manufacturer would be stupid enough to design a board ++ * that conflicts with COM 1-4 --- we hope! ++ */ ++ if (!(up->port.flags & UPF_SKIP_TEST)) { ++ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); ++ status1 = serial_inp(up, UART_MSR) & 0xF0; ++ serial_outp(up, UART_MCR, save_mcr); ++ if (status1 != 0x90) { ++ DEBUG_AUTOCONF("LOOP test failed (%02x) ", ++ status1); ++ goto out; ++ } ++ } ++ ++ /* ++ * We're pretty sure there's a port here. Lets find out what ++ * type of port it is. The IIR top two bits allows us to find ++ * out if it's 8250 or 16450, 16550, 16550A or later. This ++ * determines what we test for next. ++ * ++ * We also initialise the EFR (if any) to zero for later. The ++ * EFR occupies the same register location as the FCR and IIR. ++ */ ++ serial_outp(up, UART_LCR, 0xBF); ++ serial_outp(up, UART_EFR, 0); ++ serial_outp(up, UART_LCR, 0); ++ ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); ++ scratch = serial_in(up, UART_IIR) >> 6; ++ ++ DEBUG_AUTOCONF("iir=%d ", scratch); ++ ++ switch (scratch) { ++ case 0: ++ autoconfig_8250(up); ++ break; ++ case 1: ++ up->port.type = PORT_UNKNOWN; ++ break; ++ case 2: ++ up->port.type = PORT_16550; ++ break; ++ case 3: ++ autoconfig_16550a(up); ++ break; ++ } ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++ /* ++ * Only probe for RSA ports if we got the region. ++ */ ++ if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { ++ int i; ++ ++ for (i = 0 ; i < probe_rsa_count; ++i) { ++ if (probe_rsa[i] == up->port.iobase && ++ __enable_rsa(up)) { ++ up->port.type = PORT_RSA; ++ break; ++ } ++ } ++ } ++#endif ++ ++#ifdef CONFIG_SERIAL_8250_AU1X00 ++ /* if access method is AU, it is a 16550 with a quirk */ ++ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) ++ up->bugs |= UART_BUG_NOMSR; ++#endif ++ ++ serial_outp(up, UART_LCR, save_lcr); ++ ++ if (up->capabilities != uart_config[up->port.type].flags) { ++ printk(KERN_WARNING ++ "ttyS%d: detected caps %08x should be %08x\n", ++ up->port.line, up->capabilities, ++ uart_config[up->port.type].flags); ++ } ++ ++ up->port.fifosize = uart_config[up->port.type].fifo_size; ++ up->capabilities = uart_config[up->port.type].flags; ++ up->tx_loadsz = uart_config[up->port.type].tx_loadsz; ++ ++ if (up->port.type == PORT_UNKNOWN) ++ goto out; ++ ++ /* ++ * Reset the UART. ++ */ ++#ifdef CONFIG_SERIAL_8250_RSA ++ if (up->port.type == PORT_RSA) ++ serial_outp(up, UART_RSA_FRR, 0); ++#endif ++ serial_outp(up, UART_MCR, save_mcr); ++ serial8250_clear_fifos(up); ++ serial_in(up, UART_RX); ++ if (up->capabilities & UART_CAP_UUE) ++ serial_outp(up, UART_IER, UART_IER_UUE); ++ else ++ serial_outp(up, UART_IER, 0); ++ ++ out: ++ spin_unlock_irqrestore(&up->port.lock, flags); ++// restore_flags(flags); ++ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); ++} ++ ++static void autoconfig_irq(struct uart_8250_port *up) ++{ ++ unsigned char save_mcr, save_ier; ++ unsigned char save_ICP = 0; ++ unsigned int ICP = 0; ++ unsigned long irqs; ++ int irq; ++ ++ if (up->port.flags & UPF_FOURPORT) { ++ ICP = (up->port.iobase & 0xfe0) | 0x1f; ++ save_ICP = inb_p(ICP); ++ outb_p(0x80, ICP); ++ (void) inb_p(ICP); ++ } ++ ++ /* forget possible initially masked and pending IRQ */ ++ probe_irq_off(probe_irq_on()); ++ save_mcr = serial_inp(up, UART_MCR); ++ save_ier = serial_inp(up, UART_IER); ++ serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); ++ ++ irqs = probe_irq_on(); ++ serial_outp(up, UART_MCR, 0); ++ udelay (10); ++ if (up->port.flags & UPF_FOURPORT) { ++ serial_outp(up, UART_MCR, ++ UART_MCR_DTR | UART_MCR_RTS); ++ } else { ++ serial_outp(up, UART_MCR, ++ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); ++ } ++ serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ ++ (void)serial_inp(up, UART_LSR); ++ (void)serial_inp(up, UART_RX); ++ (void)serial_inp(up, UART_IIR); ++ (void)serial_inp(up, UART_MSR); ++ serial_outp(up, UART_TX, 0xFF); ++ udelay (20); ++ irq = probe_irq_off(irqs); ++ ++ serial_outp(up, UART_MCR, save_mcr); ++ serial_outp(up, UART_IER, save_ier); ++ ++ if (up->port.flags & UPF_FOURPORT) ++ outb_p(save_ICP, ICP); ++ ++ up->port.irq = (irq > 0) ? irq : 0; ++} ++ ++static inline void __stop_tx(struct uart_8250_port *p) ++{ ++ if (p->ier & UART_IER_THRI) { ++ p->ier &= ~UART_IER_THRI; ++ serial_out(p, UART_IER, p->ier); ++ } ++} ++ ++static void serial8250_stop_tx(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ __stop_tx(up); ++ ++ /* ++ * We really want to stop the transmitter from sending. ++ */ ++ if (up->port.type == PORT_16C950) { ++ up->acr |= UART_ACR_TXDIS; ++ serial_icr_write(up, UART_ACR, up->acr); ++ } ++} ++ ++static void transmit_chars(struct uart_8250_port *up); ++ ++static void serial8250_start_tx(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ if (!(up->ier & UART_IER_THRI)) { ++ up->ier |= UART_IER_THRI; ++ serial_out(up, UART_IER, up->ier); ++ ++ if (up->bugs & UART_BUG_TXEN) { ++ unsigned char lsr, iir; ++ lsr = serial_in(up, UART_LSR); ++ iir = serial_in(up, UART_IIR); ++ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) ++ transmit_chars(up); ++ } ++ } ++ ++ /* ++ * Re-enable the transmitter if we disabled it. ++ */ ++ if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { ++ up->acr &= ~UART_ACR_TXDIS; ++ serial_icr_write(up, UART_ACR, up->acr); ++ } ++} ++ ++static void serial8250_stop_rx(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ up->ier &= ~UART_IER_RLSI; ++ up->port.read_status_mask &= ~UART_LSR_DR; ++ serial_out(up, UART_IER, up->ier); ++} ++ ++static void serial8250_enable_ms(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ /* no MSR capabilities */ ++ if (up->bugs & UART_BUG_NOMSR) ++ return; ++ ++ up->ier |= UART_IER_MSI; ++ serial_out(up, UART_IER, up->ier); ++} ++ ++static void ++receive_chars(struct uart_8250_port *up, unsigned int *status) ++{ ++ struct tty_struct *tty = up->port.info->tty; ++ unsigned char ch, lsr = *status; ++ int max_count = 256; ++ char flag; ++ ++ do { ++ ch = serial_inp(up, UART_RX); ++ flag = TTY_NORMAL; ++ up->port.icount.rx++; ++ ++#ifdef CONFIG_SERIAL_8250_CONSOLE ++ /* ++ * Recover the break flag from console xmit ++ */ ++ if (up->port.line == up->port.cons->index) { ++ lsr |= up->lsr_break_flag; ++ up->lsr_break_flag = 0; ++ } ++#endif ++ ++ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | ++ UART_LSR_FE | UART_LSR_OE))) { ++ /* ++ * For statistics only ++ */ ++ if (lsr & UART_LSR_BI) { ++ lsr &= ~(UART_LSR_FE | UART_LSR_PE); ++ up->port.icount.brk++; ++ /* ++ * We do the SysRQ and SAK checking ++ * here because otherwise the break ++ * may get masked by ignore_status_mask ++ * or read_status_mask. ++ */ ++ if (uart_handle_break(&up->port)) ++ goto ignore_char; ++ } else if (lsr & UART_LSR_PE) ++ up->port.icount.parity++; ++ else if (lsr & UART_LSR_FE) ++ up->port.icount.frame++; ++ if (lsr & UART_LSR_OE) ++ up->port.icount.overrun++; ++ ++ /* ++ * Mask off conditions which should be ignored. ++ */ ++ lsr &= up->port.read_status_mask; ++ ++ if (lsr & UART_LSR_BI) { ++ DEBUG_INTR("handling break...."); ++ flag = TTY_BREAK; ++ } else if (lsr & UART_LSR_PE) ++ flag = TTY_PARITY; ++ else if (lsr & UART_LSR_FE) ++ flag = TTY_FRAME; ++ } ++ if (uart_handle_sysrq_char(&up->port, ch)) ++ goto ignore_char; ++ ++ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); ++ ++ ignore_char: ++ lsr = serial_inp(up, UART_LSR); ++ } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); ++ spin_unlock(&up->port.lock); ++ tty_flip_buffer_push(tty); ++ spin_lock(&up->port.lock); ++ *status = lsr; ++} ++ ++static void transmit_chars(struct uart_8250_port *up) ++{ ++ struct circ_buf *xmit = &up->port.info->xmit; ++ int count; ++ ++ if (up->port.x_char) { ++ serial_outp(up, UART_TX, up->port.x_char); ++ up->port.icount.tx++; ++ up->port.x_char = 0; ++ return; ++ } ++ if (uart_tx_stopped(&up->port)) { ++ serial8250_stop_tx(&up->port); ++ return; ++ } ++ if (uart_circ_empty(xmit)) { ++ __stop_tx(up); ++ return; ++ } ++ ++ count = up->tx_loadsz; ++ do { ++ serial_out(up, UART_TX, xmit->buf[xmit->tail]); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ up->port.icount.tx++; ++ if (uart_circ_empty(xmit)) ++ break; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(&up->port); ++ ++ DEBUG_INTR("THRE..."); ++ ++ if (uart_circ_empty(xmit)) ++ __stop_tx(up); ++} ++ ++static unsigned int check_modem_status(struct uart_8250_port *up) ++{ ++ unsigned int status = serial_in(up, UART_MSR); ++ ++ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && ++ up->port.info != NULL) { ++ if (status & UART_MSR_TERI) ++ up->port.icount.rng++; ++ if (status & UART_MSR_DDSR) ++ up->port.icount.dsr++; ++ if (status & UART_MSR_DDCD) ++ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); ++ if (status & UART_MSR_DCTS) ++ uart_handle_cts_change(&up->port, status & UART_MSR_CTS); ++ ++ wake_up_interruptible(&up->port.info->delta_msr_wait); ++ } ++ ++ return status; ++} ++ ++/* ++ * This handles the interrupt from one port. ++ */ ++static inline void ++serial8250_handle_port(struct uart_8250_port *up) ++{ ++ unsigned int status; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ status = serial_inp(up, UART_LSR); ++ ++ DEBUG_INTR("status = %x...", status); ++ ++ if (status & UART_LSR_DR) ++ receive_chars(up, &status); ++ check_modem_status(up); ++ if (status & UART_LSR_THRE) ++ transmit_chars(up); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++/* ++ * This is the serial driver's interrupt routine. ++ * ++ * Arjan thinks the old way was overly complex, so it got simplified. ++ * Alan disagrees, saying that need the complexity to handle the weird ++ * nature of ISA shared interrupts. (This is a special exception.) ++ * ++ * In order to handle ISA shared interrupts properly, we need to check ++ * that all ports have been serviced, and therefore the ISA interrupt ++ * line has been de-asserted. ++ * ++ * This means we need to loop through all ports. checking that they ++ * don't have an interrupt pending. ++ */ ++static irqreturn_t serial8250_interrupt(int irq, void *dev_id) ++{ ++ struct irq_info *i = dev_id; ++ struct list_head *l, *end = NULL; ++ int pass_counter = 0, handled = 0; ++ ++ DEBUG_INTR("serial8250_interrupt(%d)...", irq); ++ ++ spin_lock(&i->lock); ++ ++ l = i->head; ++ do { ++ struct uart_8250_port *up; ++ unsigned int iir; ++ ++ up = list_entry(l, struct uart_8250_port, list); ++ ++ iir = serial_in(up, UART_IIR); ++ if (!(iir & UART_IIR_NO_INT)) { ++ serial8250_handle_port(up); ++ ++ handled = 1; ++ ++ end = NULL; ++ } else if (end == NULL) ++ end = l; ++ ++ l = l->next; ++ ++ if (l == i->head && pass_counter++ > PASS_LIMIT) { ++ /* If we hit this, we're dead. */ ++ printk(KERN_ERR "serial8250: too much work for " ++ "irq%d\n", irq); ++ break; ++ } ++ } while (l != end); ++ ++ spin_unlock(&i->lock); ++ ++ DEBUG_INTR("end.\n"); ++ ++ return IRQ_RETVAL(handled); ++} ++ ++/* ++ * To support ISA shared interrupts, we need to have one interrupt ++ * handler that ensures that the IRQ line has been deasserted ++ * before returning. Failing to do this will result in the IRQ ++ * line being stuck active, and, since ISA irqs are edge triggered, ++ * no more IRQs will be seen. ++ */ ++static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) ++{ ++ spin_lock_irq(&i->lock); ++ ++ if (!list_empty(i->head)) { ++ if (i->head == &up->list) ++ i->head = i->head->next; ++ list_del(&up->list); ++ } else { ++ BUG_ON(i->head != &up->list); ++ i->head = NULL; ++ } ++ ++ spin_unlock_irq(&i->lock); ++} ++ ++static int serial_link_irq_chain(struct uart_8250_port *up) ++{ ++ struct irq_info *i = irq_lists + up->port.irq; ++ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; ++ ++ spin_lock_irq(&i->lock); ++ ++ if (i->head) { ++ list_add(&up->list, i->head); ++ spin_unlock_irq(&i->lock); ++ ++ ret = 0; ++ } else { ++ INIT_LIST_HEAD(&up->list); ++ i->head = &up->list; ++ spin_unlock_irq(&i->lock); ++ ++ ret = request_irq(up->port.irq, serial8250_interrupt, ++ irq_flags, "serial", i); ++ if (ret < 0) ++ serial_do_unlink(i, up); ++ } ++ ++ return ret; ++} ++ ++static void serial_unlink_irq_chain(struct uart_8250_port *up) ++{ ++ struct irq_info *i = irq_lists + up->port.irq; ++ ++ BUG_ON(i->head == NULL); ++ ++ if (list_empty(i->head)) ++ free_irq(up->port.irq, i); ++ ++ serial_do_unlink(i, up); ++} ++ ++/* Base timer interval for polling */ ++static inline int poll_timeout(int timeout) ++{ ++ return timeout > 6 ? (timeout / 2 - 2) : 1; ++} ++ ++/* ++ * This function is used to handle ports that do not have an ++ * interrupt. This doesn't work very well for 16450's, but gives ++ * barely passable results for a 16550A. (Although at the expense ++ * of much CPU overhead). ++ */ ++static void serial8250_timeout(unsigned long data) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)data; ++ unsigned int iir; ++ ++ iir = serial_in(up, UART_IIR); ++ if (!(iir & UART_IIR_NO_INT)) ++ serial8250_handle_port(up); ++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); ++} ++ ++static void serial8250_backup_timeout(unsigned long data) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)data; ++ unsigned int iir, ier = 0; ++ ++ /* ++ * Must disable interrupts or else we risk racing with the interrupt ++ * based handler. ++ */ ++ if (is_real_interrupt(up->port.irq)) { ++ ier = serial_in(up, UART_IER); ++ serial_out(up, UART_IER, 0); ++ } ++ ++ iir = serial_in(up, UART_IIR); ++ ++ /* ++ * This should be a safe test for anyone who doesn't trust the ++ * IIR bits on their UART, but it's specifically designed for ++ * the "Diva" UART used on the management processor on many HP ++ * ia64 and parisc boxes. ++ */ ++ if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && ++ (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) && ++ (serial_in(up, UART_LSR) & UART_LSR_THRE)) { ++ iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); ++ iir |= UART_IIR_THRI; ++ } ++ ++ if (!(iir & UART_IIR_NO_INT)) ++ serial8250_handle_port(up); ++ ++ if (is_real_interrupt(up->port.irq)) ++ serial_out(up, UART_IER, ier); ++ ++ /* Standard timer interval plus 0.2s to keep the port running */ ++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5); ++} ++ ++static unsigned int serial8250_tx_empty(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned long flags; ++ unsigned int ret; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return ret; ++} ++ ++static unsigned int serial8250_get_mctrl(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned int status; ++ unsigned int ret; ++ ++ status = check_modem_status(up); ++ ++ ret = 0; ++ if (status & UART_MSR_DCD) ++ ret |= TIOCM_CAR; ++ if (status & UART_MSR_RI) ++ ret |= TIOCM_RNG; ++ if (status & UART_MSR_DSR) ++ ret |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ ret |= TIOCM_CTS; ++ return ret; ++} ++ ++static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned char mcr = 0; ++ ++ if (mctrl & TIOCM_RTS) ++ mcr |= UART_MCR_RTS; ++ if (mctrl & TIOCM_DTR) ++ mcr |= UART_MCR_DTR; ++ if (mctrl & TIOCM_OUT1) ++ mcr |= UART_MCR_OUT1; ++ if (mctrl & TIOCM_OUT2) ++ mcr |= UART_MCR_OUT2; ++ if (mctrl & TIOCM_LOOP) ++ mcr |= UART_MCR_LOOP; ++ ++ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; ++ ++ serial_out(up, UART_MCR, mcr); ++} ++ ++static void serial8250_break_ctl(struct uart_port *port, int break_state) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (break_state == -1) ++ up->lcr |= UART_LCR_SBC; ++ else ++ up->lcr &= ~UART_LCR_SBC; ++ serial_out(up, UART_LCR, up->lcr); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) ++ ++/* ++ * Wait for transmitter & holding register to empty ++ */ ++static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) ++{ ++ unsigned int status, tmout = 10000; ++ ++ /* Wait up to 10ms for the character(s) to be sent. */ ++ do { ++ status = serial_in(up, UART_LSR); ++ ++ if (status & UART_LSR_BI) ++ up->lsr_break_flag = UART_LSR_BI; ++ ++ if (--tmout == 0) ++ break; ++ udelay(1); ++ } while ((status & bits) != bits); ++ ++ /* Wait up to 1s for flow control if necessary */ ++ if (up->port.flags & UPF_CONS_FLOW) { ++ tmout = 1000000; ++ while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { ++ udelay(1); ++ touch_nmi_watchdog(); ++ } ++ } ++} ++ ++static int serial8250_startup(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned long flags; ++ unsigned char lsr, iir; ++ int retval; ++ ++ up->capabilities = uart_config[up->port.type].flags; ++ up->mcr = 0; ++ ++ if (up->port.type == PORT_16C950) { ++ /* Wake up and initialize UART */ ++ up->acr = 0; ++ serial_outp(up, UART_LCR, 0xBF); ++ serial_outp(up, UART_EFR, UART_EFR_ECB); ++ serial_outp(up, UART_IER, 0); ++ serial_outp(up, UART_LCR, 0); ++ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ ++ serial_outp(up, UART_LCR, 0xBF); ++ serial_outp(up, UART_EFR, UART_EFR_ECB); ++ serial_outp(up, UART_LCR, 0); ++ } ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++ /* ++ * If this is an RSA port, see if we can kick it up to the ++ * higher speed clock. ++ */ ++ enable_rsa(up); ++#endif ++ ++ /* ++ * Clear the FIFO buffers and disable them. ++ * (they will be reenabled in set_termios()) ++ */ ++ serial8250_clear_fifos(up); ++ ++ /* ++ * Clear the interrupt registers. ++ */ ++ (void) serial_inp(up, UART_LSR); ++ (void) serial_inp(up, UART_RX); ++ (void) serial_inp(up, UART_IIR); ++ (void) serial_inp(up, UART_MSR); ++ ++ /* ++ * At this point, there's no way the LSR could still be 0xff; ++ * if it is, then bail out, because there's likely no UART ++ * here. ++ */ ++ if (!(up->port.flags & UPF_BUGGY_UART) && ++ (serial_inp(up, UART_LSR) == 0xff)) { ++ printk("ttyS%d: LSR safety check engaged!\n", up->port.line); ++ return -ENODEV; ++ } ++ ++ /* ++ * For a XR16C850, we need to set the trigger levels ++ */ ++ if (up->port.type == PORT_16850) { ++ unsigned char fctr; ++ ++ serial_outp(up, UART_LCR, 0xbf); ++ ++ fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); ++ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); ++ serial_outp(up, UART_TRG, UART_TRG_96); ++ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); ++ serial_outp(up, UART_TRG, UART_TRG_96); ++ ++ serial_outp(up, UART_LCR, 0); ++ } ++ ++ if (is_real_interrupt(up->port.irq)) { ++ /* ++ * Test for UARTs that do not reassert THRE when the ++ * transmitter is idle and the interrupt has already ++ * been cleared. Real 16550s should always reassert ++ * this interrupt whenever the transmitter is idle and ++ * the interrupt is enabled. Delays are necessary to ++ * allow register changes to become visible. ++ */ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ wait_for_xmitr(up, UART_LSR_THRE); ++ serial_out_sync(up, UART_IER, UART_IER_THRI); ++ udelay(1); /* allow THRE to set */ ++ serial_in(up, UART_IIR); ++ serial_out(up, UART_IER, 0); ++ serial_out_sync(up, UART_IER, UART_IER_THRI); ++ udelay(1); /* allow a working UART time to re-assert THRE */ ++ iir = serial_in(up, UART_IIR); ++ serial_out(up, UART_IER, 0); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ /* ++ * If the interrupt is not reasserted, setup a timer to ++ * kick the UART on a regular basis. ++ */ ++ if (iir & UART_IIR_NO_INT) { ++ pr_debug("ttyS%d - using backup timer\n", port->line); ++ up->timer.function = serial8250_backup_timeout; ++ up->timer.data = (unsigned long)up; ++ mod_timer(&up->timer, jiffies + ++ poll_timeout(up->port.timeout) + HZ/5); ++ } ++ } ++ ++ /* ++ * If the "interrupt" for this port doesn't correspond with any ++ * hardware interrupt, we use a timer-based system. The original ++ * driver used to do this with IRQ0. ++ */ ++ if (!is_real_interrupt(up->port.irq)) { ++ up->timer.data = (unsigned long)up; ++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); ++ } else { ++ retval = serial_link_irq_chain(up); ++ if (retval) ++ return retval; ++ } ++ ++ /* ++ * Now, initialize the UART ++ */ ++ serial_outp(up, UART_LCR, UART_LCR_WLEN8); ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (up->port.flags & UPF_FOURPORT) { ++ if (!is_real_interrupt(up->port.irq)) ++ up->port.mctrl |= TIOCM_OUT1; ++ } else ++ /* ++ * Most PC uarts need OUT2 raised to enable interrupts. ++ */ ++ if (is_real_interrupt(up->port.irq)) ++ up->port.mctrl |= TIOCM_OUT2; ++ ++ serial8250_set_mctrl(&up->port, up->port.mctrl); ++ ++ /* ++ * Do a quick test to see if we receive an ++ * interrupt when we enable the TX irq. ++ */ ++ serial_outp(up, UART_IER, UART_IER_THRI); ++ lsr = serial_in(up, UART_LSR); ++ iir = serial_in(up, UART_IIR); ++ serial_outp(up, UART_IER, 0); ++ ++ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { ++ if (!(up->bugs & UART_BUG_TXEN)) { ++ up->bugs |= UART_BUG_TXEN; ++ pr_debug("ttyS%d - enabling bad tx status workarounds\n", ++ port->line); ++ } ++ } else { ++ up->bugs &= ~UART_BUG_TXEN; ++ } ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ /* ++ * Finally, enable interrupts. Note: Modem status interrupts ++ * are set via set_termios(), which will be occurring imminently ++ * anyway, so we don't enable them here. ++ */ ++ up->ier = UART_IER_RLSI | UART_IER_RDI; ++ serial_outp(up, UART_IER, up->ier); ++ ++ if (up->port.flags & UPF_FOURPORT) { ++ unsigned int icp; ++ /* ++ * Enable interrupts on the AST Fourport board ++ */ ++ icp = (up->port.iobase & 0xfe0) | 0x01f; ++ outb_p(0x80, icp); ++ (void) inb_p(icp); ++ } ++ ++ /* ++ * And clear the interrupt registers again for luck. ++ */ ++ (void) serial_inp(up, UART_LSR); ++ (void) serial_inp(up, UART_RX); ++ (void) serial_inp(up, UART_IIR); ++ (void) serial_inp(up, UART_MSR); ++ ++ return 0; ++} ++ ++static void serial8250_shutdown(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned long flags; ++ ++ /* ++ * Disable interrupts from this port ++ */ ++ up->ier = 0; ++ serial_outp(up, UART_IER, 0); ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (up->port.flags & UPF_FOURPORT) { ++ /* reset interrupts on the AST Fourport board */ ++ inb((up->port.iobase & 0xfe0) | 0x1f); ++ up->port.mctrl |= TIOCM_OUT1; ++ } else ++ up->port.mctrl &= ~TIOCM_OUT2; ++ ++ serial8250_set_mctrl(&up->port, up->port.mctrl); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ /* ++ * Disable break condition and FIFOs ++ */ ++ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); ++ serial8250_clear_fifos(up); ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++ /* ++ * Reset the RSA board back to 115kbps compat mode. ++ */ ++ disable_rsa(up); ++#endif ++ ++ /* ++ * Read data port to reset things, and then unlink from ++ * the IRQ chain. ++ */ ++ (void) serial_in(up, UART_RX); ++ ++ del_timer_sync(&up->timer); ++ up->timer.function = serial8250_timeout; ++ if (is_real_interrupt(up->port.irq)) ++ serial_unlink_irq_chain(up); ++} ++ ++static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) ++{ ++ unsigned int quot; ++ ++ /* ++ * Handle magic divisors for baud rates above baud_base on ++ * SMSC SuperIO chips. ++ */ ++ if ((port->flags & UPF_MAGIC_MULTIPLIER) && ++ baud == (port->uartclk/4)) ++ quot = 0x8001; ++ else if ((port->flags & UPF_MAGIC_MULTIPLIER) && ++ baud == (port->uartclk/8)) ++ quot = 0x8002; ++ else ++ quot = uart_get_divisor(port, baud); ++ ++ return quot; ++} ++ ++static void ++serial8250_set_termios(struct uart_port *port, struct ktermios *termios, ++ struct ktermios *old) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ unsigned char cval, fcr = 0; ++ unsigned long flags; ++ unsigned int baud, quot; ++ ++ switch (termios->c_cflag & CSIZE) { ++ case CS5: ++ cval = UART_LCR_WLEN5; ++ break; ++ case CS6: ++ cval = UART_LCR_WLEN6; ++ break; ++ case CS7: ++ cval = UART_LCR_WLEN7; ++ break; ++ default: ++ case CS8: ++ cval = UART_LCR_WLEN8; ++ break; ++ } ++ ++ if (termios->c_cflag & CSTOPB) ++ cval |= UART_LCR_STOP; ++ if (termios->c_cflag & PARENB) ++ cval |= UART_LCR_PARITY; ++ if (!(termios->c_cflag & PARODD)) ++ cval |= UART_LCR_EPAR; ++#ifdef CMSPAR ++ if (termios->c_cflag & CMSPAR) ++ cval |= UART_LCR_SPAR; ++#endif ++ ++ /* ++ * Ask the core to calculate the divisor for us. ++ */ ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ quot = serial8250_get_divisor(port, baud); ++ ++ /* ++ * Oxford Semi 952 rev B workaround ++ */ ++ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) ++ quot ++; ++ ++ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { ++ if (baud < 2400) ++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; ++ else ++ fcr = uart_config[up->port.type].fcr; ++ } ++ ++ /* ++ * MCR-based auto flow control. When AFE is enabled, RTS will be ++ * deasserted when the receive FIFO contains more characters than ++ * the trigger, or the MCR RTS bit is cleared. In the case where ++ * the remote UART is not using CTS auto flow control, we must ++ * have sufficient FIFO entries for the latency of the remote ++ * UART to respond. IOW, at least 32 bytes of FIFO. ++ */ ++ if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { ++ up->mcr &= ~UART_MCR_AFE; ++ if (termios->c_cflag & CRTSCTS) ++ up->mcr |= UART_MCR_AFE; ++ } ++ ++ /* ++ * Ok, we're now changing the port state. Do it with ++ * interrupts disabled. ++ */ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ /* ++ * Update the per-port timeout. ++ */ ++ uart_update_timeout(port, termios->c_cflag, baud); ++ ++ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; ++ if (termios->c_iflag & INPCK) ++ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & (BRKINT | PARMRK)) ++ up->port.read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characteres to ignore ++ */ ++ up->port.ignore_status_mask = 0; ++ if (termios->c_iflag & IGNPAR) ++ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; ++ if (termios->c_iflag & IGNBRK) { ++ up->port.ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns too (for real raw support). ++ */ ++ if (termios->c_iflag & IGNPAR) ++ up->port.ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ /* ++ * ignore all characters if CREAD is not set ++ */ ++ if ((termios->c_cflag & CREAD) == 0) ++ up->port.ignore_status_mask |= UART_LSR_DR; ++ ++ /* ++ * CTS flow control flag and modem status interrupts ++ */ ++ up->ier &= ~UART_IER_MSI; ++ if (!(up->bugs & UART_BUG_NOMSR) && ++ UART_ENABLE_MS(&up->port, termios->c_cflag)) ++ up->ier |= UART_IER_MSI; ++ if (up->capabilities & UART_CAP_UUE) ++ up->ier |= UART_IER_UUE | UART_IER_RTOIE; ++ ++ serial_out(up, UART_IER, up->ier); ++ ++ if (up->capabilities & UART_CAP_EFR) { ++ unsigned char efr = 0; ++ /* ++ * TI16C752/Startech hardware flow control. FIXME: ++ * - TI16C752 requires control thresholds to be set. ++ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. ++ */ ++ if (termios->c_cflag & CRTSCTS) ++ efr |= UART_EFR_CTS; ++ ++ serial_outp(up, UART_LCR, 0xBF); ++ serial_outp(up, UART_EFR, efr); ++ } ++ ++#ifdef CONFIG_ARCH_OMAP15XX ++ /* Workaround to enable 115200 baud on OMAP1510 internal ports */ ++ if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) { ++ if (baud == 115200) { ++ quot = 1; ++ serial_out(up, UART_OMAP_OSC_12M_SEL, 1); ++ } else ++ serial_out(up, UART_OMAP_OSC_12M_SEL, 0); ++ } ++#endif ++ ++ if (up->capabilities & UART_NATSEMI) { ++ /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ ++ serial_outp(up, UART_LCR, 0xe0); ++ } else { ++ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ ++ } ++ ++ serial_dl_write(up, quot); ++ ++ /* ++ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR ++ * is written without DLAB set, this mode will be disabled. ++ */ ++ if (up->port.type == PORT_16750) ++ serial_outp(up, UART_FCR, fcr); ++ ++ serial_outp(up, UART_LCR, cval); /* reset DLAB */ ++ up->lcr = cval; /* Save LCR */ ++ if (up->port.type != PORT_16750) { ++ if (fcr & UART_FCR_ENABLE_FIFO) { ++ /* emulated UARTs (Lucent Venus 167x) need two steps */ ++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); ++ } ++ serial_outp(up, UART_FCR, fcr); /* set fcr */ ++ } ++ serial8250_set_mctrl(&up->port, up->port.mctrl); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++static void ++serial8250_pm(struct uart_port *port, unsigned int state, ++ unsigned int oldstate) ++{ ++ struct uart_8250_port *p = (struct uart_8250_port *)port; ++ ++ serial8250_set_sleep(p, state != 0); ++ ++ if (p->pm) ++ p->pm(port, state, oldstate); ++} ++ ++/* ++ * Resource handling. ++ */ ++static int serial8250_request_std_resource(struct uart_8250_port *up) ++{ ++ unsigned int size = 8 << up->port.regshift; ++ int ret = 0; ++ ++ switch (up->port.iotype) { ++ case UPIO_AU: ++ size = 0x100000; ++ /* fall thru */ ++ case UPIO_TSI: ++ case UPIO_MEM32: ++ case UPIO_MEM: ++ if (!up->port.mapbase) ++ break; ++ ++ if (!request_mem_region(up->port.mapbase, size, "serial")) { ++ ret = -EBUSY; ++ break; ++ } ++ ++ if (up->port.flags & UPF_IOREMAP) { ++ up->port.membase = ioremap(up->port.mapbase, size); ++ if (!up->port.membase) { ++ release_mem_region(up->port.mapbase, size); ++ ret = -ENOMEM; ++ } ++ } ++ break; ++ ++ case UPIO_HUB6: ++ case UPIO_PORT: ++ if (!request_region(up->port.iobase, size, "serial")) ++ ret = -EBUSY; ++ break; ++ } ++ return ret; ++} ++ ++static void serial8250_release_std_resource(struct uart_8250_port *up) ++{ ++ unsigned int size = 8 << up->port.regshift; ++ ++ switch (up->port.iotype) { ++ case UPIO_AU: ++ size = 0x100000; ++ /* fall thru */ ++ case UPIO_TSI: ++ case UPIO_MEM32: ++ case UPIO_MEM: ++ if (!up->port.mapbase) ++ break; ++ ++ if (up->port.flags & UPF_IOREMAP) { ++ iounmap(up->port.membase); ++ up->port.membase = NULL; ++ } ++ ++ release_mem_region(up->port.mapbase, size); ++ break; ++ ++ case UPIO_HUB6: ++ case UPIO_PORT: ++ release_region(up->port.iobase, size); ++ break; ++ } ++} ++ ++static int serial8250_request_rsa_resource(struct uart_8250_port *up) ++{ ++ unsigned long start = UART_RSA_BASE << up->port.regshift; ++ unsigned int size = 8 << up->port.regshift; ++ int ret = -EINVAL; ++ ++ switch (up->port.iotype) { ++ case UPIO_HUB6: ++ case UPIO_PORT: ++ start += up->port.iobase; ++ if (request_region(start, size, "serial-rsa")) ++ ret = 0; ++ else ++ ret = -EBUSY; ++ break; ++ } ++ ++ return ret; ++} ++ ++static void serial8250_release_rsa_resource(struct uart_8250_port *up) ++{ ++ unsigned long offset = UART_RSA_BASE << up->port.regshift; ++ unsigned int size = 8 << up->port.regshift; ++ ++ switch (up->port.iotype) { ++ case UPIO_HUB6: ++ case UPIO_PORT: ++ release_region(up->port.iobase + offset, size); ++ break; ++ } ++} ++ ++static void serial8250_release_port(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ serial8250_release_std_resource(up); ++ if (up->port.type == PORT_RSA) ++ serial8250_release_rsa_resource(up); ++} ++ ++static int serial8250_request_port(struct uart_port *port) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ int ret = 0; ++ ++ ret = serial8250_request_std_resource(up); ++ if (ret == 0 && up->port.type == PORT_RSA) { ++ ret = serial8250_request_rsa_resource(up); ++ if (ret < 0) ++ serial8250_release_std_resource(up); ++ } ++ ++ return ret; ++} ++ ++static void serial8250_config_port(struct uart_port *port, int flags) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ int probeflags = PROBE_ANY; ++ int ret; ++ ++ /* ++ * Find the region that we can probe for. This in turn ++ * tells us whether we can probe for the type of port. ++ */ ++ ret = serial8250_request_std_resource(up); ++ if (ret < 0) ++ return; ++ ++ ret = serial8250_request_rsa_resource(up); ++ if (ret < 0) ++ probeflags &= ~PROBE_RSA; ++ ++ if (flags & UART_CONFIG_TYPE) ++ autoconfig(up, probeflags); ++ if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) ++ autoconfig_irq(up); ++ ++ if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) ++ serial8250_release_rsa_resource(up); ++ if (up->port.type == PORT_UNKNOWN) ++ serial8250_release_std_resource(up); ++} ++ ++static int ++serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ if (ser->irq >= NR_IRQS || ser->irq < 0 || ++ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || ++ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || ++ ser->type == PORT_STARTECH) ++ return -EINVAL; ++ return 0; ++} ++ ++static const char * ++serial8250_type(struct uart_port *port) ++{ ++ int type = port->type; ++ ++ if (type >= ARRAY_SIZE(uart_config)) ++ type = 0; ++ return uart_config[type].name; ++} ++ ++static struct uart_ops serial8250_pops = { ++ .tx_empty = serial8250_tx_empty, ++ .set_mctrl = serial8250_set_mctrl, ++ .get_mctrl = serial8250_get_mctrl, ++ .stop_tx = serial8250_stop_tx, ++ .start_tx = serial8250_start_tx, ++ .stop_rx = serial8250_stop_rx, ++ .enable_ms = serial8250_enable_ms, ++ .break_ctl = serial8250_break_ctl, ++ .startup = serial8250_startup, ++ .shutdown = serial8250_shutdown, ++ .set_termios = serial8250_set_termios, ++ .pm = serial8250_pm, ++ .type = serial8250_type, ++ .release_port = serial8250_release_port, ++ .request_port = serial8250_request_port, ++ .config_port = serial8250_config_port, ++ .verify_port = serial8250_verify_port, ++}; ++ ++static struct uart_8250_port serial8250_ports[UART_NR]; ++ ++static void __init serial8250_isa_init_ports(void) ++{ ++ struct uart_8250_port *up; ++ static int first = 1; ++ int i; ++ ++ if (!first) ++ return; ++ first = 0; ++ ++ for (i = 0; i < nr_uarts; i++) { ++ struct uart_8250_port *up = &serial8250_ports[i]; ++ ++ up->port.line = i; ++ spin_lock_init(&up->port.lock); ++ ++ init_timer(&up->timer); ++ up->timer.function = serial8250_timeout; ++ ++ /* ++ * ALPHA_KLUDGE_MCR needs to be killed. ++ */ ++ up->mcr_mask = ~ALPHA_KLUDGE_MCR; ++ up->mcr_force = ALPHA_KLUDGE_MCR; ++ ++ up->port.ops = &serial8250_pops; ++ } ++ ++ for (i = 0, up = serial8250_ports; ++ i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; ++ i++, up++) { ++ up->port.iobase = old_serial_port[i].port; ++ up->port.irq = irq_canonicalize(old_serial_port[i].irq); ++ up->port.uartclk = old_serial_port[i].baud_base * 16; ++ up->port.flags = old_serial_port[i].flags; ++ up->port.hub6 = old_serial_port[i].hub6; ++ up->port.membase = old_serial_port[i].iomem_base; ++ up->port.iotype = old_serial_port[i].io_type; ++ up->port.regshift = old_serial_port[i].iomem_reg_shift; ++ if (share_irqs) ++ up->port.flags |= UPF_SHARE_IRQ; ++ } ++} ++ ++static void __init ++serial8250_register_ports(struct uart_driver *drv, struct device *dev) ++{ ++ int i; ++ ++ serial8250_isa_init_ports(); ++ ++ for (i = 0; i < nr_uarts; i++) { ++ struct uart_8250_port *up = &serial8250_ports[i]; ++ ++ up->port.dev = dev; ++ uart_add_one_port(drv, &up->port); ++ } ++} ++ ++#ifdef CONFIG_SERIAL_8250_CONSOLE ++ ++static void serial8250_console_putchar(struct uart_port *port, int ch) ++{ ++ struct uart_8250_port *up = (struct uart_8250_port *)port; ++ ++ wait_for_xmitr(up, UART_LSR_THRE); ++ serial_out(up, UART_TX, ch); ++} ++ ++/* ++ * Print a string to the serial port trying not to disturb ++ * any possible real use of the port... ++ * ++ * The console_lock must be held when we get here. ++ */ ++static void ++serial8250_console_write(struct console *co, const char *s, unsigned int count) ++{ ++ struct uart_8250_port *up = &serial8250_ports[co->index]; ++ unsigned long flags; ++ unsigned int ier; ++ int locked = 1; ++ ++ touch_nmi_watchdog(); ++ ++ local_irq_save(flags); ++ if (up->port.sysrq) { ++ /* serial8250_handle_port() already took the lock */ ++ locked = 0; ++ } else if (oops_in_progress) { ++ locked = spin_trylock(&up->port.lock); ++ } else ++ spin_lock(&up->port.lock); ++ ++ /* ++ * First save the IER then disable the interrupts ++ */ ++ ier = serial_in(up, UART_IER); ++ ++ if (up->capabilities & UART_CAP_UUE) ++ serial_out(up, UART_IER, UART_IER_UUE); ++ else ++ serial_out(up, UART_IER, 0); ++ ++ uart_console_write(&up->port, s, count, serial8250_console_putchar); ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IER ++ */ ++ wait_for_xmitr(up, BOTH_EMPTY); ++ serial_out(up, UART_IER, ier); ++ ++ if (locked) ++ spin_unlock(&up->port.lock); ++ local_irq_restore(flags); ++} ++ ++static int __init serial8250_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 9600; ++ int bits = 8; ++ int parity = 'n'; ++ int flow = 'n'; ++ ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ if (co->index >= nr_uarts) ++ co->index = 0; ++ port = &serial8250_ports[co->index].port; ++ if (!port->iobase && !port->membase) ++ return -ENODEV; ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++static struct uart_driver serial8250_reg; ++static struct console serial8250_console = { ++ .name = "ttyS", ++ .write = serial8250_console_write, ++ .device = uart_console_device, ++ .setup = serial8250_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &serial8250_reg, ++}; ++ ++static int __init serial8250_console_init(void) ++{ ++ serial8250_isa_init_ports(); ++ register_console(&serial8250_console); ++ return 0; ++} ++console_initcall(serial8250_console_init); ++ ++static int __init find_port(struct uart_port *p) ++{ ++ int line; ++ struct uart_port *port; ++ ++ for (line = 0; line < nr_uarts; line++) { ++ port = &serial8250_ports[line].port; ++ if (uart_match_port(p, port)) ++ return line; ++ } ++ return -ENODEV; ++} ++ ++int __init serial8250_start_console(struct uart_port *port, char *options) ++{ ++ int line; ++ ++ line = find_port(port); ++ if (line < 0) ++ return -ENODEV; ++ ++ add_preferred_console("ttyS", line, options); ++ printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n", ++ line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port", ++ port->iotype == UPIO_MEM ? (unsigned long) port->mapbase : ++ (unsigned long) port->iobase, options); ++ if (!(serial8250_console.flags & CON_ENABLED)) { ++ serial8250_console.flags &= ~CON_PRINTBUFFER; ++ register_console(&serial8250_console); ++ } ++ return line; ++} ++ ++#define SERIAL8250_CONSOLE &serial8250_console ++#else ++#define SERIAL8250_CONSOLE NULL ++#endif ++ ++static struct uart_driver serial8250_reg = { ++ .owner = THIS_MODULE, ++ .driver_name = "serial", ++ .dev_name = "ttyS", ++ .major = TTY_MAJOR, ++ .minor = 64, ++ .nr = UART_NR, ++ .cons = SERIAL8250_CONSOLE, ++}; ++ ++/* ++ * early_serial_setup - early registration for 8250 ports ++ * ++ * Setup an 8250 port structure prior to console initialisation. Use ++ * after console initialisation will cause undefined behaviour. ++ */ ++int __init early_serial_setup(struct uart_port *port) ++{ ++ if (port->line >= ARRAY_SIZE(serial8250_ports)) ++ return -ENODEV; ++ ++ serial8250_isa_init_ports(); ++ serial8250_ports[port->line].port = *port; ++ serial8250_ports[port->line].port.ops = &serial8250_pops; ++ return 0; ++} ++ ++/** ++ * serial8250_suspend_port - suspend one serial port ++ * @line: serial line number ++ * ++ * Suspend one serial port. ++ */ ++void serial8250_suspend_port(int line) ++{ ++ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); ++} ++ ++/** ++ * serial8250_resume_port - resume one serial port ++ * @line: serial line number ++ * ++ * Resume one serial port. ++ */ ++void serial8250_resume_port(int line) ++{ ++ uart_resume_port(&serial8250_reg, &serial8250_ports[line].port); ++} ++ ++/* ++ * Register a set of serial devices attached to a platform device. The ++ * list is terminated with a zero flags entry, which means we expect ++ * all entries to have at least UPF_BOOT_AUTOCONF set. ++ */ ++static int __devinit serial8250_probe(struct platform_device *dev) ++{ ++ struct plat_serial8250_port *p = dev->dev.platform_data; ++ struct uart_port port; ++ int ret, i; ++ ++ memset(&port, 0, sizeof(struct uart_port)); ++ ++ for (i = 0; p && p->flags != 0; p++, i++) { ++ port.iobase = p->iobase; ++ port.membase = p->membase; ++ port.irq = p->irq; ++ port.uartclk = p->uartclk; ++ port.regshift = p->regshift; ++ port.iotype = p->iotype; ++ port.flags = p->flags; ++ port.mapbase = p->mapbase; ++ port.hub6 = p->hub6; ++ port.dev = &dev->dev; ++ if (share_irqs) ++ port.flags |= UPF_SHARE_IRQ; ++ ret = serial8250_register_port(&port); ++ if (ret < 0) { ++ dev_err(&dev->dev, "unable to register port at index %d " ++ "(IO%lx MEM%lx IRQ%d): %d\n", i, ++ p->iobase, p->mapbase, p->irq, ret); ++ } ++ } ++ return 0; ++} ++ ++/* ++ * Remove serial ports registered against a platform device. ++ */ ++static int __devexit serial8250_remove(struct platform_device *dev) ++{ ++ int i; ++ ++ for (i = 0; i < nr_uarts; i++) { ++ struct uart_8250_port *up = &serial8250_ports[i]; ++ ++ if (up->port.dev == &dev->dev) ++ serial8250_unregister_port(i); ++ } ++ return 0; ++} ++ ++static int serial8250_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ int i; ++ ++ for (i = 0; i < UART_NR; i++) { ++ struct uart_8250_port *up = &serial8250_ports[i]; ++ ++ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) ++ uart_suspend_port(&serial8250_reg, &up->port); ++ } ++ ++ return 0; ++} ++ ++static int serial8250_resume(struct platform_device *dev) ++{ ++ int i; ++ ++ for (i = 0; i < UART_NR; i++) { ++ struct uart_8250_port *up = &serial8250_ports[i]; ++ ++ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) ++ uart_resume_port(&serial8250_reg, &up->port); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver serial8250_isa_driver = { ++ .probe = serial8250_probe, ++ .remove = __devexit_p(serial8250_remove), ++ .suspend = serial8250_suspend, ++ .resume = serial8250_resume, ++ .driver = { ++ .name = "serial8250", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++/* ++ * This "device" covers _all_ ISA 8250-compatible serial devices listed ++ * in the table in include/asm/serial.h ++ */ ++static struct platform_device *serial8250_isa_devs; ++ ++/* ++ * serial8250_register_port and serial8250_unregister_port allows for ++ * 16x50 serial ports to be configured at run-time, to support PCMCIA ++ * modems and PCI multiport cards. ++ */ ++static DEFINE_MUTEX(serial_mutex); ++ ++static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) ++{ ++ int i; ++ ++ /* ++ * First, find a port entry which matches. ++ */ ++ for (i = 0; i < nr_uarts; i++) ++ if (uart_match_port(&serial8250_ports[i].port, port)) ++ return &serial8250_ports[i]; ++ ++ /* ++ * We didn't find a matching entry, so look for the first ++ * free entry. We look for one which hasn't been previously ++ * used (indicated by zero iobase). ++ */ ++ for (i = 0; i < nr_uarts; i++) ++ if (serial8250_ports[i].port.type == PORT_UNKNOWN && ++ serial8250_ports[i].port.iobase == 0) ++ return &serial8250_ports[i]; ++ ++ /* ++ * That also failed. Last resort is to find any entry which ++ * doesn't have a real port associated with it. ++ */ ++ for (i = 0; i < nr_uarts; i++) ++ if (serial8250_ports[i].port.type == PORT_UNKNOWN) ++ return &serial8250_ports[i]; ++ ++ return NULL; ++} ++ ++/** ++ * serial8250_register_port - register a serial port ++ * @port: serial port template ++ * ++ * Configure the serial port specified by the request. If the ++ * port exists and is in use, it is hung up and unregistered ++ * first. ++ * ++ * The port is then probed and if necessary the IRQ is autodetected ++ * If this fails an error is returned. ++ * ++ * On success the port is ready to use and the line number is returned. ++ */ ++int serial8250_register_port(struct uart_port *port) ++{ ++ struct uart_8250_port *uart; ++ int ret = -ENOSPC; ++ ++ if (port->uartclk == 0) ++ return -EINVAL; ++ ++ mutex_lock(&serial_mutex); ++ ++ uart = serial8250_find_match_or_unused(port); ++ if (uart) { ++ uart_remove_one_port(&serial8250_reg, &uart->port); ++ ++ uart->port.iobase = port->iobase; ++ uart->port.membase = port->membase; ++ uart->port.irq = port->irq; ++ uart->port.uartclk = port->uartclk; ++ uart->port.fifosize = port->fifosize; ++ uart->port.regshift = port->regshift; ++ uart->port.iotype = port->iotype; ++ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; ++ uart->port.mapbase = port->mapbase; ++ if (port->dev) ++ uart->port.dev = port->dev; ++ ++ ret = uart_add_one_port(&serial8250_reg, &uart->port); ++ if (ret == 0) ++ ret = uart->port.line; ++ } ++ mutex_unlock(&serial_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL(serial8250_register_port); ++ ++/** ++ * serial8250_unregister_port - remove a 16x50 serial port at runtime ++ * @line: serial line number ++ * ++ * Remove one serial port. This may not be called from interrupt ++ * context. We hand the port back to the our control. ++ */ ++void serial8250_unregister_port(int line) ++{ ++ struct uart_8250_port *uart = &serial8250_ports[line]; ++ ++ mutex_lock(&serial_mutex); ++ uart_remove_one_port(&serial8250_reg, &uart->port); ++ if (serial8250_isa_devs) { ++ uart->port.flags &= ~UPF_BOOT_AUTOCONF; ++ uart->port.type = PORT_UNKNOWN; ++ uart->port.dev = &serial8250_isa_devs->dev; ++ uart_add_one_port(&serial8250_reg, &uart->port); ++ } else { ++ uart->port.dev = NULL; ++ } ++ mutex_unlock(&serial_mutex); ++} ++EXPORT_SYMBOL(serial8250_unregister_port); ++ ++static int __init serial8250_init(void) ++{ ++ int ret, i; ++ ++ if (nr_uarts > UART_NR) ++ nr_uarts = UART_NR; ++ ++ printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ " ++ "%d ports, IRQ sharing %sabled\n", nr_uarts, ++ share_irqs ? "en" : "dis"); ++ ++ for (i = 0; i < NR_IRQS; i++) ++ spin_lock_init(&irq_lists[i].lock); ++ ++ ret = uart_register_driver(&serial8250_reg); ++ if (ret) ++ goto out; ++ ++ serial8250_isa_devs = platform_device_alloc("serial8250", ++ PLAT8250_DEV_LEGACY); ++ if (!serial8250_isa_devs) { ++ ret = -ENOMEM; ++ goto unreg_uart_drv; ++ } ++ ++ ret = platform_device_add(serial8250_isa_devs); ++ if (ret) ++ goto put_dev; ++ ++ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); ++ ++ ret = platform_driver_register(&serial8250_isa_driver); ++ if (ret == 0) ++ goto out; ++ ++ platform_device_del(serial8250_isa_devs); ++ put_dev: ++ platform_device_put(serial8250_isa_devs); ++ unreg_uart_drv: ++ uart_unregister_driver(&serial8250_reg); ++ out: ++ return ret; ++} ++ ++static void __exit serial8250_exit(void) ++{ ++ struct platform_device *isa_dev = serial8250_isa_devs; ++ ++ /* ++ * This tells serial8250_unregister_port() not to re-register ++ * the ports (thereby making serial8250_isa_driver permanently ++ * in use.) ++ */ ++ serial8250_isa_devs = NULL; ++ ++ platform_driver_unregister(&serial8250_isa_driver); ++ platform_device_unregister(isa_dev); ++ ++ uart_unregister_driver(&serial8250_reg); ++} ++ ++module_init(serial8250_init); ++module_exit(serial8250_exit); ++ ++EXPORT_SYMBOL(serial8250_suspend_port); ++EXPORT_SYMBOL(serial8250_resume_port); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $"); ++ ++module_param(share_irqs, uint, 0644); ++MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" ++ " (unsafe)"); ++ ++module_param(nr_uarts, uint, 0644); ++MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); ++ ++#ifdef CONFIG_SERIAL_8250_RSA ++module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); ++MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); ++#endif ++MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); +diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h linux-2.6.21.1-owrt/drivers/usb/host/ehci.h +--- linux-2.6.21.1/drivers/usb/host/ehci.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h 2007-05-23 23:37:18.000000000 +0200 +@@ -87,6 +87,7 @@ + struct dma_pool *sitd_pool; /* sitd per split iso urb */ + + struct timer_list watchdog; ++ struct timer_list softirq; + unsigned long actions; + unsigned stamp; + unsigned long next_statechange; +diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c +--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c 2007-05-23 23:37:18.000000000 +0200 +@@ -118,6 +118,7 @@ + #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ + #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ + #define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ ++#define EHCI_SOFTIRQ (HZ/400) + + /* Initial IRQ latency: faster than hw default */ + static int log2_irq_thresh = 0; // 0 to 6 +@@ -273,6 +274,16 @@ + #include "ehci-sched.c" + + /*-------------------------------------------------------------------------*/ ++static irqreturn_t ehci_irq (struct usb_hcd *hcd); ++ ++static void ehci_softirq (unsigned long param) ++{ ++ struct ehci_hcd *ehci = (struct ehci_hcd *) param; ++ ++ if (ehci_irq(ehci_to_hcd(ehci)) != IRQ_NONE) ++ set_bit(HCD_FLAG_SAW_IRQ, &(ehci_to_hcd(ehci))->flags); ++ mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ); ++} + + static void ehci_watchdog (unsigned long param) + { +@@ -289,6 +300,10 @@ + COUNT (ehci->stats.lost_iaa); + ehci_writel(ehci, STS_IAA, &ehci->regs->status); + ehci->reclaim_ready = 1; ++ if (!timer_pending(&ehci->softirq)) { ++ ehci_info(ehci, "switching to softirq\n"); ++ mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ); ++ } + } + } + +@@ -396,6 +411,7 @@ + + /* no more interrupts ... */ + del_timer_sync (&ehci->watchdog); ++ del_timer_sync (&ehci->softirq); + + spin_lock_irq(&ehci->lock); + if (HC_IS_RUNNING (hcd->state)) +@@ -444,6 +460,10 @@ + ehci->watchdog.function = ehci_watchdog; + ehci->watchdog.data = (unsigned long) ehci; + ++ init_timer(&ehci->softirq); ++ ehci->softirq.function = ehci_softirq; ++ ehci->softirq.data = (unsigned long) ehci; ++ + /* + * hw default: 1K periodic list heads, one per frame. + * periodic_size can shrink by USBCMD update if hcc_params allows. +diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig +--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,1008 @@ ++/* ++ * Copyright (c) 2000-2004 by David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/module.h> ++#include <linux/pci.h> ++#include <linux/dmapool.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/smp_lock.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/reboot.h> ++#include <linux/usb.h> ++#include <linux/moduleparam.h> ++#include <linux/dma-mapping.h> ++ ++#include "../core/hcd.h" ++ ++#include <asm/byteorder.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/unaligned.h> ++#ifdef CONFIG_PPC_PS3 ++#include <asm/firmware.h> ++#endif ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * EHCI hc_driver implementation ... experimental, incomplete. ++ * Based on the final 1.0 register interface specification. ++ * ++ * USB 2.0 shows up in upcoming www.pcmcia.org technology. ++ * First was PCMCIA, like ISA; then CardBus, which is PCI. ++ * Next comes "CardBay", using USB 2.0 signals. ++ * ++ * Contains additional contributions by Brad Hards, Rory Bolt, and others. ++ * Special thanks to Intel and VIA for providing host controllers to ++ * test this driver on, and Cypress (including In-System Design) for ++ * providing early devices for those host controllers to talk to! ++ * ++ * HISTORY: ++ * ++ * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db) ++ * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net) ++ * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka, ++ * <sojkam@centrum.cz>, updates by DB). ++ * ++ * 2002-11-29 Correct handling for hw async_next register. ++ * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared; ++ * only scheduling is different, no arbitrary limitations. ++ * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support, ++ * clean up HC run state handshaking. ++ * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts ++ * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other ++ * missing pieces: enabling 64bit dma, handoff from BIOS/SMM. ++ * 2002-05-07 Some error path cleanups to report better errors; wmb(); ++ * use non-CVS version id; better iso bandwidth claim. ++ * 2002-04-19 Control/bulk/interrupt submit no longer uses giveback() on ++ * errors in submit path. Bugfixes to interrupt scheduling/processing. ++ * 2002-03-05 Initial high-speed ISO support; reduce ITD memory; shift ++ * more checking to generic hcd framework (db). Make it work with ++ * Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt). ++ * 2002-01-14 Minor cleanup; version synch. ++ * 2002-01-08 Fix roothub handoff of FS/LS to companion controllers. ++ * 2002-01-04 Control/Bulk queuing behaves. ++ * ++ * 2001-12-12 Initial patch version for Linux 2.5.1 kernel. ++ * 2001-June Works with usb-storage and NEC EHCI on 2.4 ++ */ ++ ++#define DRIVER_VERSION "10 Dec 2004" ++#define DRIVER_AUTHOR "David Brownell" ++#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver" ++ ++static const char hcd_name [] = "ehci_hcd"; ++ ++ ++#undef EHCI_VERBOSE_DEBUG ++#undef EHCI_URB_TRACE ++ ++#ifdef DEBUG ++#define EHCI_STATS ++#endif ++ ++/* magic numbers that can affect system performance */ ++#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ ++#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ ++#define EHCI_TUNE_RL_TT 0 ++#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ ++#define EHCI_TUNE_MULT_TT 1 ++#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ ++ ++#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ ++#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ ++#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ ++#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ ++ ++/* Initial IRQ latency: faster than hw default */ ++static int log2_irq_thresh = 0; // 0 to 6 ++module_param (log2_irq_thresh, int, S_IRUGO); ++MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes"); ++ ++/* initial park setting: slower than hw default */ ++static unsigned park = 0; ++module_param (park, uint, S_IRUGO); ++MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); ++ ++/* for flakey hardware, ignore overcurrent indicators */ ++static int ignore_oc = 0; ++module_param (ignore_oc, bool, S_IRUGO); ++MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); ++ ++#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) ++ ++/*-------------------------------------------------------------------------*/ ++ ++#include "ehci.h" ++#include "ehci-dbg.c" ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * handshake - spin reading hc until handshake completes or fails ++ * @ptr: address of hc register to be read ++ * @mask: bits to look at in result of read ++ * @done: value of those bits when handshake succeeds ++ * @usec: timeout in microseconds ++ * ++ * Returns negative errno, or zero on success ++ * ++ * Success happens when the "mask" bits have the specified value (hardware ++ * handshake done). There are two failure modes: "usec" have passed (major ++ * hardware flakeout), or the register reads as all-ones (hardware removed). ++ * ++ * That last failure should_only happen in cases like physical cardbus eject ++ * before driver shutdown. But it also seems to be caused by bugs in cardbus ++ * bridge shutdown: shutting down the bridge before the devices using it. ++ */ ++static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, ++ u32 mask, u32 done, int usec) ++{ ++ u32 result; ++ ++ do { ++ result = ehci_readl(ehci, ptr); ++ if (result == ~(u32)0) /* card removed */ ++ return -ENODEV; ++ result &= mask; ++ if (result == done) ++ return 0; ++ udelay (1); ++ usec--; ++ } while (usec > 0); ++ return -ETIMEDOUT; ++} ++ ++/* force HC to halt state from unknown (EHCI spec section 2.3) */ ++static int ehci_halt (struct ehci_hcd *ehci) ++{ ++ u32 temp = ehci_readl(ehci, &ehci->regs->status); ++ ++ /* disable any irqs left enabled by previous code */ ++ ehci_writel(ehci, 0, &ehci->regs->intr_enable); ++ ++ if ((temp & STS_HALT) != 0) ++ return 0; ++ ++ temp = ehci_readl(ehci, &ehci->regs->command); ++ temp &= ~CMD_RUN; ++ ehci_writel(ehci, temp, &ehci->regs->command); ++ return handshake (ehci, &ehci->regs->status, ++ STS_HALT, STS_HALT, 16 * 125); ++} ++ ++/* put TDI/ARC silicon into EHCI mode */ ++static void tdi_reset (struct ehci_hcd *ehci) ++{ ++ u32 __iomem *reg_ptr; ++ u32 tmp; ++ ++ reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68); ++ tmp = ehci_readl(ehci, reg_ptr); ++ tmp |= 0x3; ++ ehci_writel(ehci, tmp, reg_ptr); ++} ++ ++/* reset a non-running (STS_HALT == 1) controller */ ++static int ehci_reset (struct ehci_hcd *ehci) ++{ ++ int retval; ++ u32 command = ehci_readl(ehci, &ehci->regs->command); ++ ++ command |= CMD_RESET; ++ dbg_cmd (ehci, "reset", command); ++ ehci_writel(ehci, command, &ehci->regs->command); ++ ehci_to_hcd(ehci)->state = HC_STATE_HALT; ++ ehci->next_statechange = jiffies; ++ retval = handshake (ehci, &ehci->regs->command, ++ CMD_RESET, 0, 250 * 1000); ++ ++ if (retval) ++ return retval; ++ ++ if (ehci_is_TDI(ehci)) ++ tdi_reset (ehci); ++ ++ return retval; ++} ++ ++/* idle the controller (from running) */ ++static void ehci_quiesce (struct ehci_hcd *ehci) ++{ ++ u32 temp; ++ ++#ifdef DEBUG ++ if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) ++ BUG (); ++#endif ++ ++ /* wait for any schedule enables/disables to take effect */ ++ temp = ehci_readl(ehci, &ehci->regs->command) << 10; ++ temp &= STS_ASS | STS_PSS; ++ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS, ++ temp, 16 * 125) != 0) { ++ ehci_to_hcd(ehci)->state = HC_STATE_HALT; ++ return; ++ } ++ ++ /* then disable anything that's still active */ ++ temp = ehci_readl(ehci, &ehci->regs->command); ++ temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE); ++ ehci_writel(ehci, temp, &ehci->regs->command); ++ ++ /* hardware can take 16 microframes to turn off ... */ ++ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS, ++ 0, 16 * 125) != 0) { ++ ehci_to_hcd(ehci)->state = HC_STATE_HALT; ++ return; ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ehci_work(struct ehci_hcd *ehci); ++ ++#include "ehci-hub.c" ++#include "ehci-mem.c" ++#include "ehci-q.c" ++#include "ehci-sched.c" ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ehci_watchdog (unsigned long param) ++{ ++ struct ehci_hcd *ehci = (struct ehci_hcd *) param; ++ unsigned long flags; ++ ++ spin_lock_irqsave (&ehci->lock, flags); ++ ++ /* lost IAA irqs wedge things badly; seen with a vt8235 */ ++ if (ehci->reclaim) { ++ u32 status = ehci_readl(ehci, &ehci->regs->status); ++ if (status & STS_IAA) { ++ ehci_vdbg (ehci, "lost IAA\n"); ++ COUNT (ehci->stats.lost_iaa); ++ ehci_writel(ehci, STS_IAA, &ehci->regs->status); ++ ehci->reclaim_ready = 1; ++ } ++ } ++ ++ /* stop async processing after it's idled a bit */ ++ if (test_bit (TIMER_ASYNC_OFF, &ehci->actions)) ++ start_unlink_async (ehci, ehci->async); ++ ++ /* ehci could run by timer, without IRQs ... */ ++ ehci_work (ehci); ++ ++ spin_unlock_irqrestore (&ehci->lock, flags); ++} ++ ++/* On some systems, leaving remote wakeup enabled prevents system shutdown. ++ * The firmware seems to think that powering off is a wakeup event! ++ * This routine turns off remote wakeup and everything else, on all ports. ++ */ ++static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) ++{ ++ int port = HCS_N_PORTS(ehci->hcs_params); ++ ++ while (port--) ++ ehci_writel(ehci, PORT_RWC_BITS, ++ &ehci->regs->port_status[port]); ++} ++ ++/* ehci_shutdown kick in for silicon on any bus (not just pci, etc). ++ * This forcibly disables dma and IRQs, helping kexec and other cases ++ * where the next system software may expect clean state. ++ */ ++static void ++ehci_shutdown (struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci; ++ ++ ehci = hcd_to_ehci (hcd); ++ (void) ehci_halt (ehci); ++ ehci_turn_off_all_ports(ehci); ++ ++ /* make BIOS/etc use companion controller during reboot */ ++ ehci_writel(ehci, 0, &ehci->regs->configured_flag); ++ ++ /* unblock posted writes */ ++ ehci_readl(ehci, &ehci->regs->configured_flag); ++} ++ ++static void ehci_port_power (struct ehci_hcd *ehci, int is_on) ++{ ++ unsigned port; ++ ++ if (!HCS_PPC (ehci->hcs_params)) ++ return; ++ ++ ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down"); ++ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) ++ (void) ehci_hub_control(ehci_to_hcd(ehci), ++ is_on ? SetPortFeature : ClearPortFeature, ++ USB_PORT_FEAT_POWER, ++ port--, NULL, 0); ++ msleep(20); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * ehci_work is called from some interrupts, timers, and so on. ++ * it calls driver completion functions, after dropping ehci->lock. ++ */ ++static void ehci_work (struct ehci_hcd *ehci) ++{ ++ timer_action_done (ehci, TIMER_IO_WATCHDOG); ++ if (ehci->reclaim_ready) ++ end_unlink_async (ehci); ++ ++ /* another CPU may drop ehci->lock during a schedule scan while ++ * it reports urb completions. this flag guards against bogus ++ * attempts at re-entrant schedule scanning. ++ */ ++ if (ehci->scanning) ++ return; ++ ehci->scanning = 1; ++ scan_async (ehci); ++ if (ehci->next_uframe != -1) ++ scan_periodic (ehci); ++ ehci->scanning = 0; ++ ++ /* the IO watchdog guards against hardware or driver bugs that ++ * misplace IRQs, and should let us run completely without IRQs. ++ * such lossage has been observed on both VT6202 and VT8235. ++ */ ++ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ++ (ehci->async->qh_next.ptr != NULL || ++ ehci->periodic_sched != 0)) ++ timer_action (ehci, TIMER_IO_WATCHDOG); ++} ++ ++static void ehci_stop (struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ ++ ehci_dbg (ehci, "stop\n"); ++ ++ /* Turn off port power on all root hub ports. */ ++ ehci_port_power (ehci, 0); ++ ++ /* no more interrupts ... */ ++ del_timer_sync (&ehci->watchdog); ++ ++ spin_lock_irq(&ehci->lock); ++ if (HC_IS_RUNNING (hcd->state)) ++ ehci_quiesce (ehci); ++ ++ ehci_reset (ehci); ++ ehci_writel(ehci, 0, &ehci->regs->intr_enable); ++ spin_unlock_irq(&ehci->lock); ++ ++ /* let companion controllers work when we aren't */ ++ ehci_writel(ehci, 0, &ehci->regs->configured_flag); ++ ++ remove_companion_file(ehci); ++ remove_debug_files (ehci); ++ ++ /* root hub is shut down separately (first, when possible) */ ++ spin_lock_irq (&ehci->lock); ++ if (ehci->async) ++ ehci_work (ehci); ++ spin_unlock_irq (&ehci->lock); ++ ehci_mem_cleanup (ehci); ++ ++#ifdef EHCI_STATS ++ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", ++ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, ++ ehci->stats.lost_iaa); ++ ehci_dbg (ehci, "complete %ld unlink %ld\n", ++ ehci->stats.complete, ehci->stats.unlink); ++#endif ++ ++ dbg_status (ehci, "ehci_stop completed", ++ ehci_readl(ehci, &ehci->regs->status)); ++} ++ ++/* one-time init, only for memory state */ ++static int ehci_init(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ u32 temp; ++ int retval; ++ u32 hcc_params; ++ ++ spin_lock_init(&ehci->lock); ++ ++ init_timer(&ehci->watchdog); ++ ehci->watchdog.function = ehci_watchdog; ++ ehci->watchdog.data = (unsigned long) ehci; ++ ++ /* ++ * hw default: 1K periodic list heads, one per frame. ++ * periodic_size can shrink by USBCMD update if hcc_params allows. ++ */ ++ ehci->periodic_size = DEFAULT_I_TDPS; ++ if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) ++ return retval; ++ ++ /* controllers may cache some of the periodic schedule ... */ ++ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); ++ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ++ ehci->i_thresh = 8; ++ else // N microframes cached ++ ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); ++ ++ ehci->reclaim = NULL; ++ ehci->reclaim_ready = 0; ++ ehci->next_uframe = -1; ++ ++ /* ++ * dedicate a qh for the async ring head, since we couldn't unlink ++ * a 'real' qh without stopping the async schedule [4.8]. use it ++ * as the 'reclamation list head' too. ++ * its dummy is used in hw_alt_next of many tds, to prevent the qh ++ * from automatically advancing to the next td after short reads. ++ */ ++ ehci->async->qh_next.qh = NULL; ++ ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma); ++ ehci->async->hw_info1 = cpu_to_le32(QH_HEAD); ++ ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT); ++ ehci->async->hw_qtd_next = EHCI_LIST_END; ++ ehci->async->qh_state = QH_STATE_LINKED; ++ ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma); ++ ++ /* clear interrupt enables, set irq latency */ ++ if (log2_irq_thresh < 0 || log2_irq_thresh > 6) ++ log2_irq_thresh = 0; ++ temp = 1 << (16 + log2_irq_thresh); ++ if (HCC_CANPARK(hcc_params)) { ++ /* HW default park == 3, on hardware that supports it (like ++ * NVidia and ALI silicon), maximizes throughput on the async ++ * schedule by avoiding QH fetches between transfers. ++ * ++ * With fast usb storage devices and NForce2, "park" seems to ++ * make problems: throughput reduction (!), data errors... ++ */ ++ if (park) { ++ park = min(park, (unsigned) 3); ++ temp |= CMD_PARK; ++ temp |= park << 8; ++ } ++ ehci_dbg(ehci, "park %d\n", park); ++ } ++ if (HCC_PGM_FRAMELISTLEN(hcc_params)) { ++ /* periodic schedule size can be smaller than default */ ++ temp &= ~(3 << 2); ++ temp |= (EHCI_TUNE_FLS << 2); ++ switch (EHCI_TUNE_FLS) { ++ case 0: ehci->periodic_size = 1024; break; ++ case 1: ehci->periodic_size = 512; break; ++ case 2: ehci->periodic_size = 256; break; ++ default: BUG(); ++ } ++ } ++ ehci->command = temp; ++ ++ return 0; ++} ++ ++/* start HC running; it's halted, ehci_init() has been run (once) */ ++static int ehci_run (struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ int retval; ++ u32 temp; ++ u32 hcc_params; ++ ++ hcd->uses_new_polling = 1; ++ hcd->poll_rh = 0; ++ ++ /* EHCI spec section 4.1 */ ++ if ((retval = ehci_reset(ehci)) != 0) { ++ ehci_mem_cleanup(ehci); ++ return retval; ++ } ++ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); ++ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); ++ ++ /* ++ * hcc_params controls whether ehci->regs->segment must (!!!) ++ * be used; it constrains QH/ITD/SITD and QTD locations. ++ * pci_pool consistent memory always uses segment zero. ++ * streaming mappings for I/O buffers, like pci_map_single(), ++ * can return segments above 4GB, if the device allows. ++ * ++ * NOTE: the dma mask is visible through dma_supported(), so ++ * drivers can pass this info along ... like NETIF_F_HIGHDMA, ++ * Scsi_Host.highmem_io, and so forth. It's readonly to all ++ * host side drivers though. ++ */ ++ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); ++ if (HCC_64BIT_ADDR(hcc_params)) { ++ ehci_writel(ehci, 0, &ehci->regs->segment); ++#if 0 ++// this is deeply broken on almost all architectures ++ if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK)) ++ ehci_info(ehci, "enabled 64bit DMA\n"); ++#endif ++ } ++ ++ ++ // Philips, Intel, and maybe others need CMD_RUN before the ++ // root hub will detect new devices (why?); NEC doesn't ++ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); ++ ehci->command |= CMD_RUN; ++ ehci_writel(ehci, ehci->command, &ehci->regs->command); ++ dbg_cmd (ehci, "init", ehci->command); ++ ++ /* ++ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices ++ * are explicitly handed to companion controller(s), so no TT is ++ * involved with the root hub. (Except where one is integrated, ++ * and there's no companion controller unless maybe for USB OTG.) ++ */ ++ hcd->state = HC_STATE_RUNNING; ++ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); ++ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ ++ ++ temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ehci_info (ehci, ++ "USB %x.%x started, EHCI %x.%02x, driver %s%s\n", ++ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), ++ temp >> 8, temp & 0xff, DRIVER_VERSION, ++ ignore_oc ? ", overcurrent ignored" : ""); ++ ++ ehci_writel(ehci, INTR_MASK, ++ &ehci->regs->intr_enable); /* Turn On Interrupts */ ++ ++ /* GRR this is run-once init(), being done every time the HC starts. ++ * So long as they're part of class devices, we can't do it init() ++ * since the class device isn't created that early. ++ */ ++ create_debug_files(ehci); ++ create_companion_file(ehci); ++ ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static irqreturn_t ehci_irq (struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ u32 status, pcd_status = 0; ++ int bh; ++ ++ spin_lock (&ehci->lock); ++ ++ status = ehci_readl(ehci, &ehci->regs->status); ++ ++ /* e.g. cardbus physical eject */ ++ if (status == ~(u32) 0) { ++ ehci_dbg (ehci, "device removed\n"); ++ goto dead; ++ } ++ ++ status &= INTR_MASK; ++ if (!status) { /* irq sharing? */ ++ spin_unlock(&ehci->lock); ++ return IRQ_NONE; ++ } ++ ++ /* clear (just) interrupts */ ++ ehci_writel(ehci, status, &ehci->regs->status); ++ ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */ ++ bh = 0; ++ ++#ifdef EHCI_VERBOSE_DEBUG ++ /* unrequested/ignored: Frame List Rollover */ ++ dbg_status (ehci, "irq", status); ++#endif ++ ++ /* INT, ERR, and IAA interrupt rates can be throttled */ ++ ++ /* normal [4.15.1.2] or error [4.15.1.1] completion */ ++ if (likely ((status & (STS_INT|STS_ERR)) != 0)) { ++ if (likely ((status & STS_ERR) == 0)) ++ COUNT (ehci->stats.normal); ++ else ++ COUNT (ehci->stats.error); ++ bh = 1; ++ } ++ ++ /* complete the unlinking of some qh [4.15.2.3] */ ++ if (status & STS_IAA) { ++ COUNT (ehci->stats.reclaim); ++ ehci->reclaim_ready = 1; ++ bh = 1; ++ } ++ ++ /* remote wakeup [4.3.1] */ ++ if (status & STS_PCD) { ++ unsigned i = HCS_N_PORTS (ehci->hcs_params); ++ pcd_status = status; ++ ++ /* resume root hub? */ ++ if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN)) ++ usb_hcd_resume_root_hub(hcd); ++ ++ while (i--) { ++ int pstatus = ehci_readl(ehci, ++ &ehci->regs->port_status [i]); ++ ++ if (pstatus & PORT_OWNER) ++ continue; ++ if (!(pstatus & PORT_RESUME) ++ || ehci->reset_done [i] != 0) ++ continue; ++ ++ /* start 20 msec resume signaling from this port, ++ * and make khubd collect PORT_STAT_C_SUSPEND to ++ * stop that signaling. ++ */ ++ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); ++ ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); ++ mod_timer(&hcd->rh_timer, ehci->reset_done[i]); ++ } ++ } ++ ++ /* PCI errors [4.15.2.4] */ ++ if (unlikely ((status & STS_FATAL) != 0)) { ++ /* bogus "fatal" IRQs appear on some chips... why? */ ++ status = ehci_readl(ehci, &ehci->regs->status); ++ dbg_cmd (ehci, "fatal", ehci_readl(ehci, ++ &ehci->regs->command)); ++ dbg_status (ehci, "fatal", status); ++ if (status & STS_HALT) { ++ ehci_err (ehci, "fatal error\n"); ++dead: ++ ehci_reset (ehci); ++ ehci_writel(ehci, 0, &ehci->regs->configured_flag); ++ /* generic layer kills/unlinks all urbs, then ++ * uses ehci_stop to clean up the rest ++ */ ++ bh = 1; ++ } ++ } ++ ++ if (bh) ++ ehci_work (ehci); ++ spin_unlock (&ehci->lock); ++ if (pcd_status & STS_PCD) ++ usb_hcd_poll_rh_status(hcd); ++ return IRQ_HANDLED; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * non-error returns are a promise to giveback() the urb later ++ * we drop ownership so next owner (or urb unlink) can get it ++ * ++ * urb + dev is in hcd.self.controller.urb_list ++ * we're queueing TDs onto software and hardware lists ++ * ++ * hcd-specific init for hcpriv hasn't been done yet ++ * ++ * NOTE: control, bulk, and interrupt share the same code to append TDs ++ * to a (possibly active) QH, and the same QH scanning code. ++ */ ++static int ehci_urb_enqueue ( ++ struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep, ++ struct urb *urb, ++ gfp_t mem_flags ++) { ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ struct list_head qtd_list; ++ ++ INIT_LIST_HEAD (&qtd_list); ++ ++ switch (usb_pipetype (urb->pipe)) { ++ // case PIPE_CONTROL: ++ // case PIPE_BULK: ++ default: ++ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) ++ return -ENOMEM; ++ return submit_async (ehci, ep, urb, &qtd_list, mem_flags); ++ ++ case PIPE_INTERRUPT: ++ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) ++ return -ENOMEM; ++ return intr_submit (ehci, ep, urb, &qtd_list, mem_flags); ++ ++ case PIPE_ISOCHRONOUS: ++ if (urb->dev->speed == USB_SPEED_HIGH) ++ return itd_submit (ehci, urb, mem_flags); ++ else ++ return sitd_submit (ehci, urb, mem_flags); ++ } ++} ++ ++static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) ++{ ++ /* if we need to use IAA and it's busy, defer */ ++ if (qh->qh_state == QH_STATE_LINKED ++ && ehci->reclaim ++ && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) { ++ struct ehci_qh *last; ++ ++ for (last = ehci->reclaim; ++ last->reclaim; ++ last = last->reclaim) ++ continue; ++ qh->qh_state = QH_STATE_UNLINK_WAIT; ++ last->reclaim = qh; ++ ++ /* bypass IAA if the hc can't care */ ++ } else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim) ++ end_unlink_async (ehci); ++ ++ /* something else might have unlinked the qh by now */ ++ if (qh->qh_state == QH_STATE_LINKED) ++ start_unlink_async (ehci, qh); ++} ++ ++/* remove from hardware lists ++ * completions normally happen asynchronously ++ */ ++ ++static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ struct ehci_qh *qh; ++ unsigned long flags; ++ ++ spin_lock_irqsave (&ehci->lock, flags); ++ switch (usb_pipetype (urb->pipe)) { ++ // case PIPE_CONTROL: ++ // case PIPE_BULK: ++ default: ++ qh = (struct ehci_qh *) urb->hcpriv; ++ if (!qh) ++ break; ++ unlink_async (ehci, qh); ++ break; ++ ++ case PIPE_INTERRUPT: ++ qh = (struct ehci_qh *) urb->hcpriv; ++ if (!qh) ++ break; ++ switch (qh->qh_state) { ++ case QH_STATE_LINKED: ++ intr_deschedule (ehci, qh); ++ /* FALL THROUGH */ ++ case QH_STATE_IDLE: ++ qh_completions (ehci, qh); ++ break; ++ default: ++ ehci_dbg (ehci, "bogus qh %p state %d\n", ++ qh, qh->qh_state); ++ goto done; ++ } ++ ++ /* reschedule QH iff another request is queued */ ++ if (!list_empty (&qh->qtd_list) ++ && HC_IS_RUNNING (hcd->state)) { ++ int status; ++ ++ status = qh_schedule (ehci, qh); ++ spin_unlock_irqrestore (&ehci->lock, flags); ++ ++ if (status != 0) { ++ // shouldn't happen often, but ... ++ // FIXME kill those tds' urbs ++ err ("can't reschedule qh %p, err %d", ++ qh, status); ++ } ++ return status; ++ } ++ break; ++ ++ case PIPE_ISOCHRONOUS: ++ // itd or sitd ... ++ ++ // wait till next completion, do it then. ++ // completion irqs can wait up to 1024 msec, ++ break; ++ } ++done: ++ spin_unlock_irqrestore (&ehci->lock, flags); ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++// bulk qh holds the data toggle ++ ++static void ++ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ unsigned long flags; ++ struct ehci_qh *qh, *tmp; ++ ++ /* ASSERT: any requests/urbs are being unlinked */ ++ /* ASSERT: nobody can be submitting urbs for this any more */ ++ ++rescan: ++ spin_lock_irqsave (&ehci->lock, flags); ++ qh = ep->hcpriv; ++ if (!qh) ++ goto done; ++ ++ /* endpoints can be iso streams. for now, we don't ++ * accelerate iso completions ... so spin a while. ++ */ ++ if (qh->hw_info1 == 0) { ++ ehci_vdbg (ehci, "iso delay\n"); ++ goto idle_timeout; ++ } ++ ++ if (!HC_IS_RUNNING (hcd->state)) ++ qh->qh_state = QH_STATE_IDLE; ++ switch (qh->qh_state) { ++ case QH_STATE_LINKED: ++ for (tmp = ehci->async->qh_next.qh; ++ tmp && tmp != qh; ++ tmp = tmp->qh_next.qh) ++ continue; ++ /* periodic qh self-unlinks on empty */ ++ if (!tmp) ++ goto nogood; ++ unlink_async (ehci, qh); ++ /* FALL THROUGH */ ++ case QH_STATE_UNLINK: /* wait for hw to finish? */ ++idle_timeout: ++ spin_unlock_irqrestore (&ehci->lock, flags); ++ schedule_timeout_uninterruptible(1); ++ goto rescan; ++ case QH_STATE_IDLE: /* fully unlinked */ ++ if (list_empty (&qh->qtd_list)) { ++ qh_put (qh); ++ break; ++ } ++ /* else FALL THROUGH */ ++ default: ++nogood: ++ /* caller was supposed to have unlinked any requests; ++ * that's not our job. just leak this memory. ++ */ ++ ehci_err (ehci, "qh %p (#%02x) state %d%s\n", ++ qh, ep->desc.bEndpointAddress, qh->qh_state, ++ list_empty (&qh->qtd_list) ? "" : "(has tds)"); ++ break; ++ } ++ ep->hcpriv = NULL; ++done: ++ spin_unlock_irqrestore (&ehci->lock, flags); ++ return; ++} ++ ++static int ehci_get_frame (struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci (hcd); ++ return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) % ++ ehci->periodic_size; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC ++ ++MODULE_DESCRIPTION (DRIVER_INFO); ++MODULE_AUTHOR (DRIVER_AUTHOR); ++MODULE_LICENSE ("GPL"); ++ ++#ifdef CONFIG_PCI ++#include "ehci-pci.c" ++#define PCI_DRIVER ehci_pci_driver ++#endif ++ ++#ifdef CONFIG_MPC834x ++#include "ehci-fsl.c" ++#define PLATFORM_DRIVER ehci_fsl_driver ++#endif ++ ++#ifdef CONFIG_SOC_AU1200 ++#include "ehci-au1xxx.c" ++#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver ++#endif ++ ++#ifdef CONFIG_PPC_PS3 ++#include "ehci-ps3.c" ++#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_sb_driver ++#endif ++ ++#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ ++ !defined(PS3_SYSTEM_BUS_DRIVER) ++#error "missing bus glue for ehci-hcd" ++#endif ++ ++static int __init ehci_hcd_init(void) ++{ ++ int retval = 0; ++ ++ pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", ++ hcd_name, ++ sizeof(struct ehci_qh), sizeof(struct ehci_qtd), ++ sizeof(struct ehci_itd), sizeof(struct ehci_sitd)); ++ ++#ifdef PLATFORM_DRIVER ++ retval = platform_driver_register(&PLATFORM_DRIVER); ++ if (retval < 0) ++ return retval; ++#endif ++ ++#ifdef PCI_DRIVER ++ retval = pci_register_driver(&PCI_DRIVER); ++ if (retval < 0) { ++#ifdef PLATFORM_DRIVER ++ platform_driver_unregister(&PLATFORM_DRIVER); ++#endif ++ return retval; ++ } ++#endif ++ ++#ifdef PS3_SYSTEM_BUS_DRIVER ++ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { ++ retval = ps3_system_bus_driver_register( ++ &PS3_SYSTEM_BUS_DRIVER); ++ if (retval < 0) { ++#ifdef PLATFORM_DRIVER ++ platform_driver_unregister(&PLATFORM_DRIVER); ++#endif ++#ifdef PCI_DRIVER ++ pci_unregister_driver(&PCI_DRIVER); ++#endif ++ return retval; ++ } ++ } ++#endif ++ ++ return retval; ++} ++module_init(ehci_hcd_init); ++ ++static void __exit ehci_hcd_cleanup(void) ++{ ++#ifdef PLATFORM_DRIVER ++ platform_driver_unregister(&PLATFORM_DRIVER); ++#endif ++#ifdef PCI_DRIVER ++ pci_unregister_driver(&PCI_DRIVER); ++#endif ++#ifdef PS3_SYSTEM_BUS_DRIVER ++ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) ++ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); ++#endif ++} ++module_exit(ehci_hcd_cleanup); ++ +diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig +--- linux-2.6.21.1/drivers/usb/host/ehci.h.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,707 @@ ++/* ++ * Copyright (c) 2001-2002 by David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __LINUX_EHCI_HCD_H ++#define __LINUX_EHCI_HCD_H ++ ++/* definitions used for the EHCI driver */ ++ ++/* statistics can be kept for for tuning/monitoring */ ++struct ehci_stats { ++ /* irq usage */ ++ unsigned long normal; ++ unsigned long error; ++ unsigned long reclaim; ++ unsigned long lost_iaa; ++ ++ /* termination of urbs from core */ ++ unsigned long complete; ++ unsigned long unlink; ++}; ++ ++/* ehci_hcd->lock guards shared data against other CPUs: ++ * ehci_hcd: async, reclaim, periodic (and shadow), ... ++ * usb_host_endpoint: hcpriv ++ * ehci_qh: qh_next, qtd_list ++ * ehci_qtd: qtd_list ++ * ++ * Also, hold this lock when talking to HC registers or ++ * when updating hw_* fields in shared qh/qtd/... structures. ++ */ ++ ++#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ ++ ++struct ehci_hcd { /* one per controller */ ++ /* glue to PCI and HCD framework */ ++ struct ehci_caps __iomem *caps; ++ struct ehci_regs __iomem *regs; ++ struct ehci_dbg_port __iomem *debug; ++ ++ __u32 hcs_params; /* cached register copy */ ++ spinlock_t lock; ++ ++ /* async schedule support */ ++ struct ehci_qh *async; ++ struct ehci_qh *reclaim; ++ unsigned reclaim_ready : 1; ++ unsigned scanning : 1; ++ ++ /* periodic schedule support */ ++#define DEFAULT_I_TDPS 1024 /* some HCs can do less */ ++ unsigned periodic_size; ++ __le32 *periodic; /* hw periodic table */ ++ dma_addr_t periodic_dma; ++ unsigned i_thresh; /* uframes HC might cache */ ++ ++ union ehci_shadow *pshadow; /* mirror hw periodic table */ ++ int next_uframe; /* scan periodic, start here */ ++ unsigned periodic_sched; /* periodic activity count */ ++ ++ /* per root hub port */ ++ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; ++ /* bit vectors (one bit per port) */ ++ unsigned long bus_suspended; /* which ports were ++ already suspended at the start of a bus suspend */ ++ unsigned long companion_ports; /* which ports are ++ dedicated to the companion controller */ ++ ++ /* per-HC memory pools (could be per-bus, but ...) */ ++ struct dma_pool *qh_pool; /* qh per active urb */ ++ struct dma_pool *qtd_pool; /* one or more per qh */ ++ struct dma_pool *itd_pool; /* itd per iso urb */ ++ struct dma_pool *sitd_pool; /* sitd per split iso urb */ ++ ++ struct timer_list watchdog; ++ unsigned long actions; ++ unsigned stamp; ++ unsigned long next_statechange; ++ u32 command; ++ ++ /* SILICON QUIRKS */ ++ unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */ ++ unsigned no_selective_suspend:1; ++ unsigned has_fsl_port_bug:1; /* FreeScale */ ++ unsigned big_endian_mmio:1; ++ ++ u8 sbrn; /* packed release number */ ++ ++ /* irq statistics */ ++#ifdef EHCI_STATS ++ struct ehci_stats stats; ++# define COUNT(x) do { (x)++; } while (0) ++#else ++# define COUNT(x) do {} while (0) ++#endif ++}; ++ ++/* convert between an HCD pointer and the corresponding EHCI_HCD */ ++static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd) ++{ ++ return (struct ehci_hcd *) (hcd->hcd_priv); ++} ++static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci) ++{ ++ return container_of ((void *) ehci, struct usb_hcd, hcd_priv); ++} ++ ++ ++enum ehci_timer_action { ++ TIMER_IO_WATCHDOG, ++ TIMER_IAA_WATCHDOG, ++ TIMER_ASYNC_SHRINK, ++ TIMER_ASYNC_OFF, ++}; ++ ++static inline void ++timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action) ++{ ++ clear_bit (action, &ehci->actions); ++} ++ ++static inline void ++timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) ++{ ++ if (!test_and_set_bit (action, &ehci->actions)) { ++ unsigned long t; ++ ++ switch (action) { ++ case TIMER_IAA_WATCHDOG: ++ t = EHCI_IAA_JIFFIES; ++ break; ++ case TIMER_IO_WATCHDOG: ++ t = EHCI_IO_JIFFIES; ++ break; ++ case TIMER_ASYNC_OFF: ++ t = EHCI_ASYNC_JIFFIES; ++ break; ++ // case TIMER_ASYNC_SHRINK: ++ default: ++ t = EHCI_SHRINK_JIFFIES; ++ break; ++ } ++ t += jiffies; ++ // all timings except IAA watchdog can be overridden. ++ // async queue SHRINK often precedes IAA. while it's ready ++ // to go OFF neither can matter, and afterwards the IO ++ // watchdog stops unless there's still periodic traffic. ++ if (action != TIMER_IAA_WATCHDOG ++ && t > ehci->watchdog.expires ++ && timer_pending (&ehci->watchdog)) ++ return; ++ mod_timer (&ehci->watchdog, t); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ ++ ++/* Section 2.2 Host Controller Capability Registers */ ++struct ehci_caps { ++ /* these fields are specified as 8 and 16 bit registers, ++ * but some hosts can't perform 8 or 16 bit PCI accesses. ++ */ ++ u32 hc_capbase; ++#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ ++#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ ++ u32 hcs_params; /* HCSPARAMS - offset 0x4 */ ++#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ ++#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ ++#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ ++#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ ++#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ ++#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ ++#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ ++ ++ u32 hcc_params; /* HCCPARAMS - offset 0x8 */ ++#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ ++#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ ++#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ ++#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ ++#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ ++#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ ++ u8 portroute [8]; /* nibbles for routing - offset 0xC */ ++} __attribute__ ((packed)); ++ ++ ++/* Section 2.3 Host Controller Operational Registers */ ++struct ehci_regs { ++ ++ /* USBCMD: offset 0x00 */ ++ u32 command; ++/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ ++#define CMD_PARK (1<<11) /* enable "park" on async qh */ ++#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ ++#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ ++#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ ++#define CMD_ASE (1<<5) /* async schedule enable */ ++#define CMD_PSE (1<<4) /* periodic schedule enable */ ++/* 3:2 is periodic frame list size */ ++#define CMD_RESET (1<<1) /* reset HC not bus */ ++#define CMD_RUN (1<<0) /* start/stop HC */ ++ ++ /* USBSTS: offset 0x04 */ ++ u32 status; ++#define STS_ASS (1<<15) /* Async Schedule Status */ ++#define STS_PSS (1<<14) /* Periodic Schedule Status */ ++#define STS_RECL (1<<13) /* Reclamation */ ++#define STS_HALT (1<<12) /* Not running (any reason) */ ++/* some bits reserved */ ++ /* these STS_* flags are also intr_enable bits (USBINTR) */ ++#define STS_IAA (1<<5) /* Interrupted on async advance */ ++#define STS_FATAL (1<<4) /* such as some PCI access errors */ ++#define STS_FLR (1<<3) /* frame list rolled over */ ++#define STS_PCD (1<<2) /* port change detect */ ++#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ ++#define STS_INT (1<<0) /* "normal" completion (short, ...) */ ++ ++ /* USBINTR: offset 0x08 */ ++ u32 intr_enable; ++ ++ /* FRINDEX: offset 0x0C */ ++ u32 frame_index; /* current microframe number */ ++ /* CTRLDSSEGMENT: offset 0x10 */ ++ u32 segment; /* address bits 63:32 if needed */ ++ /* PERIODICLISTBASE: offset 0x14 */ ++ u32 frame_list; /* points to periodic list */ ++ /* ASYNCLISTADDR: offset 0x18 */ ++ u32 async_next; /* address of next async queue head */ ++ ++ u32 reserved [9]; ++ ++ /* CONFIGFLAG: offset 0x40 */ ++ u32 configured_flag; ++#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ ++ ++ /* PORTSC: offset 0x44 */ ++ u32 port_status [0]; /* up to N_PORTS */ ++/* 31:23 reserved */ ++#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ ++#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ ++#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ ++/* 19:16 for port testing */ ++#define PORT_LED_OFF (0<<14) ++#define PORT_LED_AMBER (1<<14) ++#define PORT_LED_GREEN (2<<14) ++#define PORT_LED_MASK (3<<14) ++#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ ++#define PORT_POWER (1<<12) /* true: has power (see PPC) */ ++#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */ ++/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ ++/* 9 reserved */ ++#define PORT_RESET (1<<8) /* reset port */ ++#define PORT_SUSPEND (1<<7) /* suspend port */ ++#define PORT_RESUME (1<<6) /* resume it */ ++#define PORT_OCC (1<<5) /* over current change */ ++#define PORT_OC (1<<4) /* over current active */ ++#define PORT_PEC (1<<3) /* port enable change */ ++#define PORT_PE (1<<2) /* port enable */ ++#define PORT_CSC (1<<1) /* connect status change */ ++#define PORT_CONNECT (1<<0) /* device connected */ ++#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) ++} __attribute__ ((packed)); ++ ++/* Appendix C, Debug port ... intended for use with special "debug devices" ++ * that can help if there's no serial console. (nonstandard enumeration.) ++ */ ++struct ehci_dbg_port { ++ u32 control; ++#define DBGP_OWNER (1<<30) ++#define DBGP_ENABLED (1<<28) ++#define DBGP_DONE (1<<16) ++#define DBGP_INUSE (1<<10) ++#define DBGP_ERRCODE(x) (((x)>>7)&0x07) ++# define DBGP_ERR_BAD 1 ++# define DBGP_ERR_SIGNAL 2 ++#define DBGP_ERROR (1<<6) ++#define DBGP_GO (1<<5) ++#define DBGP_OUT (1<<4) ++#define DBGP_LEN(x) (((x)>>0)&0x0f) ++ u32 pids; ++#define DBGP_PID_GET(x) (((x)>>16)&0xff) ++#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) ++ u32 data03; ++ u32 data47; ++ u32 address; ++#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) ++} __attribute__ ((packed)); ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define QTD_NEXT(dma) cpu_to_le32((u32)dma) ++ ++/* ++ * EHCI Specification 0.95 Section 3.5 ++ * QTD: describe data transfer components (buffer, direction, ...) ++ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". ++ * ++ * These are associated only with "QH" (Queue Head) structures, ++ * used with control, bulk, and interrupt transfers. ++ */ ++struct ehci_qtd { ++ /* first part defined by EHCI spec */ ++ __le32 hw_next; /* see EHCI 3.5.1 */ ++ __le32 hw_alt_next; /* see EHCI 3.5.2 */ ++ __le32 hw_token; /* see EHCI 3.5.3 */ ++#define QTD_TOGGLE (1 << 31) /* data toggle */ ++#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) ++#define QTD_IOC (1 << 15) /* interrupt on complete */ ++#define QTD_CERR(tok) (((tok)>>10) & 0x3) ++#define QTD_PID(tok) (((tok)>>8) & 0x3) ++#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ ++#define QTD_STS_HALT (1 << 6) /* halted on error */ ++#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ ++#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ ++#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ ++#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ ++#define QTD_STS_STS (1 << 1) /* split transaction state */ ++#define QTD_STS_PING (1 << 0) /* issue PING? */ ++ __le32 hw_buf [5]; /* see EHCI 3.5.4 */ ++ __le32 hw_buf_hi [5]; /* Appendix B */ ++ ++ /* the rest is HCD-private */ ++ dma_addr_t qtd_dma; /* qtd address */ ++ struct list_head qtd_list; /* sw qtd list */ ++ struct urb *urb; /* qtd's urb */ ++ size_t length; /* length of buffer */ ++} __attribute__ ((aligned (32))); ++ ++/* mask NakCnt+T in qh->hw_alt_next */ ++#define QTD_MASK __constant_cpu_to_le32 (~0x1f) ++ ++#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1) ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* type tag from {qh,itd,sitd,fstn}->hw_next */ ++#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1)) ++ ++/* values for that type tag */ ++#define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1) ++#define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1) ++#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1) ++#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1) ++ ++/* next async queue entry, or pointer to interrupt/periodic QH */ ++#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) ++ ++/* for periodic/async schedules and qtd lists, mark end of list */ ++#define EHCI_LIST_END __constant_cpu_to_le32(1) /* "null pointer" to hw */ ++ ++/* ++ * Entries in periodic shadow table are pointers to one of four kinds ++ * of data structure. That's dictated by the hardware; a type tag is ++ * encoded in the low bits of the hardware's periodic schedule. Use ++ * Q_NEXT_TYPE to get the tag. ++ * ++ * For entries in the async schedule, the type tag always says "qh". ++ */ ++union ehci_shadow { ++ struct ehci_qh *qh; /* Q_TYPE_QH */ ++ struct ehci_itd *itd; /* Q_TYPE_ITD */ ++ struct ehci_sitd *sitd; /* Q_TYPE_SITD */ ++ struct ehci_fstn *fstn; /* Q_TYPE_FSTN */ ++ __le32 *hw_next; /* (all types) */ ++ void *ptr; ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * EHCI Specification 0.95 Section 3.6 ++ * QH: describes control/bulk/interrupt endpoints ++ * See Fig 3-7 "Queue Head Structure Layout". ++ * ++ * These appear in both the async and (for interrupt) periodic schedules. ++ */ ++ ++struct ehci_qh { ++ /* first part defined by EHCI spec */ ++ __le32 hw_next; /* see EHCI 3.6.1 */ ++ __le32 hw_info1; /* see EHCI 3.6.2 */ ++#define QH_HEAD 0x00008000 ++ __le32 hw_info2; /* see EHCI 3.6.2 */ ++#define QH_SMASK 0x000000ff ++#define QH_CMASK 0x0000ff00 ++#define QH_HUBADDR 0x007f0000 ++#define QH_HUBPORT 0x3f800000 ++#define QH_MULT 0xc0000000 ++ __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ ++ ++ /* qtd overlay (hardware parts of a struct ehci_qtd) */ ++ __le32 hw_qtd_next; ++ __le32 hw_alt_next; ++ __le32 hw_token; ++ __le32 hw_buf [5]; ++ __le32 hw_buf_hi [5]; ++ ++ /* the rest is HCD-private */ ++ dma_addr_t qh_dma; /* address of qh */ ++ union ehci_shadow qh_next; /* ptr to qh; or periodic */ ++ struct list_head qtd_list; /* sw qtd list */ ++ struct ehci_qtd *dummy; ++ struct ehci_qh *reclaim; /* next to reclaim */ ++ ++ struct ehci_hcd *ehci; ++ struct kref kref; ++ unsigned stamp; ++ ++ u8 qh_state; ++#define QH_STATE_LINKED 1 /* HC sees this */ ++#define QH_STATE_UNLINK 2 /* HC may still see this */ ++#define QH_STATE_IDLE 3 /* HC doesn't see this */ ++#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ ++#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ ++ ++ /* periodic schedule info */ ++ u8 usecs; /* intr bandwidth */ ++ u8 gap_uf; /* uframes split/csplit gap */ ++ u8 c_usecs; /* ... split completion bw */ ++ u16 tt_usecs; /* tt downstream bandwidth */ ++ unsigned short period; /* polling interval */ ++ unsigned short start; /* where polling starts */ ++#define NO_FRAME ((unsigned short)~0) /* pick new start */ ++ struct usb_device *dev; /* access to TT */ ++} __attribute__ ((aligned (32))); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* description of one iso transaction (up to 3 KB data if highspeed) */ ++struct ehci_iso_packet { ++ /* These will be copied to iTD when scheduling */ ++ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */ ++ __le32 transaction; /* itd->hw_transaction[i] |= */ ++ u8 cross; /* buf crosses pages */ ++ /* for full speed OUT splits */ ++ u32 buf1; ++}; ++ ++/* temporary schedule data for packets from iso urbs (both speeds) ++ * each packet is one logical usb transaction to the device (not TT), ++ * beginning at stream->next_uframe ++ */ ++struct ehci_iso_sched { ++ struct list_head td_list; ++ unsigned span; ++ struct ehci_iso_packet packet [0]; ++}; ++ ++/* ++ * ehci_iso_stream - groups all (s)itds for this endpoint. ++ * acts like a qh would, if EHCI had them for ISO. ++ */ ++struct ehci_iso_stream { ++ /* first two fields match QH, but info1 == 0 */ ++ __le32 hw_next; ++ __le32 hw_info1; ++ ++ u32 refcount; ++ u8 bEndpointAddress; ++ u8 highspeed; ++ u16 depth; /* depth in uframes */ ++ struct list_head td_list; /* queued itds/sitds */ ++ struct list_head free_list; /* list of unused itds/sitds */ ++ struct usb_device *udev; ++ struct usb_host_endpoint *ep; ++ ++ /* output of (re)scheduling */ ++ unsigned long start; /* jiffies */ ++ unsigned long rescheduled; ++ int next_uframe; ++ __le32 splits; ++ ++ /* the rest is derived from the endpoint descriptor, ++ * trusting urb->interval == f(epdesc->bInterval) and ++ * including the extra info for hw_bufp[0..2] ++ */ ++ u8 interval; ++ u8 usecs, c_usecs; ++ u16 tt_usecs; ++ u16 maxp; ++ u16 raw_mask; ++ unsigned bandwidth; ++ ++ /* This is used to initialize iTD's hw_bufp fields */ ++ __le32 buf0; ++ __le32 buf1; ++ __le32 buf2; ++ ++ /* this is used to initialize sITD's tt info */ ++ __le32 address; ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * EHCI Specification 0.95 Section 3.3 ++ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)" ++ * ++ * Schedule records for high speed iso xfers ++ */ ++struct ehci_itd { ++ /* first part defined by EHCI spec */ ++ __le32 hw_next; /* see EHCI 3.3.1 */ ++ __le32 hw_transaction [8]; /* see EHCI 3.3.2 */ ++#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */ ++#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */ ++#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */ ++#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */ ++#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff) ++#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */ ++ ++#define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE) ++ ++ __le32 hw_bufp [7]; /* see EHCI 3.3.3 */ ++ __le32 hw_bufp_hi [7]; /* Appendix B */ ++ ++ /* the rest is HCD-private */ ++ dma_addr_t itd_dma; /* for this itd */ ++ union ehci_shadow itd_next; /* ptr to periodic q entry */ ++ ++ struct urb *urb; ++ struct ehci_iso_stream *stream; /* endpoint's queue */ ++ struct list_head itd_list; /* list of stream's itds */ ++ ++ /* any/all hw_transactions here may be used by that urb */ ++ unsigned frame; /* where scheduled */ ++ unsigned pg; ++ unsigned index[8]; /* in urb->iso_frame_desc */ ++ u8 usecs[8]; ++} __attribute__ ((aligned (32))); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * EHCI Specification 0.95 Section 3.4 ++ * siTD, aka split-transaction isochronous Transfer Descriptor ++ * ... describe full speed iso xfers through TT in hubs ++ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD) ++ */ ++struct ehci_sitd { ++ /* first part defined by EHCI spec */ ++ __le32 hw_next; ++/* uses bit field macros above - see EHCI 0.95 Table 3-8 */ ++ __le32 hw_fullspeed_ep; /* EHCI table 3-9 */ ++ __le32 hw_uframe; /* EHCI table 3-10 */ ++ __le32 hw_results; /* EHCI table 3-11 */ ++#define SITD_IOC (1 << 31) /* interrupt on completion */ ++#define SITD_PAGE (1 << 30) /* buffer 0/1 */ ++#define SITD_LENGTH(x) (0x3ff & ((x)>>16)) ++#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */ ++#define SITD_STS_ERR (1 << 6) /* error from TT */ ++#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */ ++#define SITD_STS_BABBLE (1 << 4) /* device was babbling */ ++#define SITD_STS_XACT (1 << 3) /* illegal IN response */ ++#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */ ++#define SITD_STS_STS (1 << 1) /* split transaction state */ ++ ++#define SITD_ACTIVE __constant_cpu_to_le32(SITD_STS_ACTIVE) ++ ++ __le32 hw_buf [2]; /* EHCI table 3-12 */ ++ __le32 hw_backpointer; /* EHCI table 3-13 */ ++ __le32 hw_buf_hi [2]; /* Appendix B */ ++ ++ /* the rest is HCD-private */ ++ dma_addr_t sitd_dma; ++ union ehci_shadow sitd_next; /* ptr to periodic q entry */ ++ ++ struct urb *urb; ++ struct ehci_iso_stream *stream; /* endpoint's queue */ ++ struct list_head sitd_list; /* list of stream's sitds */ ++ unsigned frame; ++ unsigned index; ++} __attribute__ ((aligned (32))); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * EHCI Specification 0.96 Section 3.7 ++ * Periodic Frame Span Traversal Node (FSTN) ++ * ++ * Manages split interrupt transactions (using TT) that span frame boundaries ++ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN ++ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until ++ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work. ++ */ ++struct ehci_fstn { ++ __le32 hw_next; /* any periodic q entry */ ++ __le32 hw_prev; /* qh or EHCI_LIST_END */ ++ ++ /* the rest is HCD-private */ ++ dma_addr_t fstn_dma; ++ union ehci_shadow fstn_next; /* ptr to periodic q entry */ ++} __attribute__ ((aligned (32))); ++ ++/*-------------------------------------------------------------------------*/ ++ ++#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT ++ ++/* ++ * Some EHCI controllers have a Transaction Translator built into the ++ * root hub. This is a non-standard feature. Each controller will need ++ * to add code to the following inline functions, and call them as ++ * needed (mostly in root hub code). ++ */ ++ ++#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt) ++ ++/* Returns the speed of a device attached to a port on the root hub. */ ++static inline unsigned int ++ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) ++{ ++ if (ehci_is_TDI(ehci)) { ++ switch ((portsc>>26)&3) { ++ case 0: ++ return 0; ++ case 1: ++ return (1<<USB_PORT_FEAT_LOWSPEED); ++ case 2: ++ default: ++ return (1<<USB_PORT_FEAT_HIGHSPEED); ++ } ++ } ++ return (1<<USB_PORT_FEAT_HIGHSPEED); ++} ++ ++#else ++ ++#define ehci_is_TDI(e) (0) ++ ++#define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED) ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++#ifdef CONFIG_PPC_83xx ++/* Some Freescale processors have an erratum in which the TT ++ * port number in the queue head was 0..N-1 instead of 1..N. ++ */ ++#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug) ++#else ++#define ehci_has_fsl_portno_bug(e) (0) ++#endif ++ ++/* ++ * While most USB host controllers implement their registers in ++ * little-endian format, a minority (celleb companion chip) implement ++ * them in big endian format. ++ * ++ * This attempts to support either format at compile time without a ++ * runtime penalty, or both formats with the additional overhead ++ * of checking a flag bit. ++ */ ++ ++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO ++#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio) ++#else ++#define ehci_big_endian_mmio(e) 0 ++#endif ++ ++static inline unsigned int ehci_readl (const struct ehci_hcd *ehci, ++ __u32 __iomem * regs) ++{ ++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO ++ return ehci_big_endian_mmio(ehci) ? ++ readl_be(regs) : ++ readl(regs); ++#else ++ return readl(regs); ++#endif ++} ++ ++static inline void ehci_writel (const struct ehci_hcd *ehci, ++ const unsigned int val, __u32 __iomem *regs) ++{ ++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO ++ ehci_big_endian_mmio(ehci) ? ++ writel_be(val, regs) : ++ writel(val, regs); ++#else ++ writel(val, regs); ++#endif ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++#ifndef DEBUG ++#define STUB_DEBUG_FILES ++#endif /* DEBUG */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++#endif /* __LINUX_EHCI_HCD_H */ +diff -Nur linux-2.6.21.1/include/asm-mips/bootinfo.h linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h +--- linux-2.6.21.1/include/asm-mips/bootinfo.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h 2007-05-23 23:34:01.000000000 +0200 +@@ -213,6 +213,17 @@ + #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ + #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ + +/* @@ -167,9 +8874,9 @@ diff -Nur linux-2.6.17/include/asm-mips/bootinfo.h linux-2.6.17-owrt/include/asm #define CL_SIZE COMMAND_LINE_SIZE const char *get_system_type(void); -diff -Nur linux-2.6.17/include/asm-mips/cpu.h linux-2.6.17-owrt/include/asm-mips/cpu.h ---- linux-2.6.17/include/asm-mips/cpu.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/include/asm-mips/cpu.h 2006-06-18 12:45:56.000000000 +0200 +diff -Nur linux-2.6.21.1/include/asm-mips/cpu.h linux-2.6.21.1-owrt/include/asm-mips/cpu.h +--- linux-2.6.21.1/include/asm-mips/cpu.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/include/asm-mips/cpu.h 2007-05-23 23:34:01.000000000 +0200 @@ -54,6 +54,9 @@ #define PRID_IMP_R14000 0x0f00 #define PRID_IMP_R8000 0x1000 @@ -190,25 +8897,385 @@ diff -Nur linux-2.6.17/include/asm-mips/cpu.h linux-2.6.17-owrt/include/asm-mips /* * ISA Level encodings -diff -Nur linux-2.6.17/include/asm-mips/mach-generic/irq.h linux-2.6.17-owrt/include/asm-mips/mach-generic/irq.h ---- linux-2.6.17/include/asm-mips/mach-generic/irq.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/include/asm-mips/mach-generic/irq.h 2006-06-18 12:44:28.000000000 +0200 -@@ -8,6 +8,6 @@ - #ifndef __ASM_MACH_GENERIC_IRQ_H +diff -Nur linux-2.6.21.1/include/asm-mips/mach-generic/irq.h linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h +--- linux-2.6.21.1/include/asm-mips/mach-generic/irq.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h 2007-05-23 23:35:55.000000000 +0200 +@@ -9,7 +9,7 @@ #define __ASM_MACH_GENERIC_IRQ_H + #ifndef NR_IRQS -#define NR_IRQS 128 +#define NR_IRQS 256 + #endif - #endif /* __ASM_MACH_GENERIC_IRQ_H */ -diff -Nur linux-2.6.17/include/linux/kernel.h linux-2.6.17-owrt/include/linux/kernel.h ---- linux-2.6.17/include/linux/kernel.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-owrt/include/linux/kernel.h 2006-06-18 12:44:28.000000000 +0200 -@@ -329,6 +329,7 @@ + #ifdef CONFIG_I8259 +diff -Nur linux-2.6.21.1/include/linux/kernel.h linux-2.6.21.1-owrt/include/linux/kernel.h +--- linux-2.6.21.1/include/linux/kernel.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1-owrt/include/linux/kernel.h 2007-05-23 23:34:01.000000000 +0200 +@@ -334,6 +334,7 @@ }; /* Force a compilation error if condition is true */ +extern void BUILD_BUG(void); #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) - /* Trap pasters of __FUNCTION__ at compile-time */ + /* Force a compilation error if condition is true, but also produce a +diff -Nur linux-2.6.21.1/include/linux/kernel.h.orig linux-2.6.21.1-owrt/include/linux/kernel.h.orig +--- linux-2.6.21.1/include/linux/kernel.h.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/include/linux/kernel.h.orig 2007-04-27 23:49:26.000000000 +0200 +@@ -0,0 +1,355 @@ ++#ifndef _LINUX_KERNEL_H ++#define _LINUX_KERNEL_H ++ ++/* ++ * 'kernel.h' contains some often-used function prototypes etc ++ */ ++ ++#ifdef __KERNEL__ ++ ++#include <stdarg.h> ++#include <linux/linkage.h> ++#include <linux/stddef.h> ++#include <linux/types.h> ++#include <linux/compiler.h> ++#include <linux/bitops.h> ++#include <linux/log2.h> ++#include <asm/byteorder.h> ++#include <asm/bug.h> ++ ++extern const char linux_banner[]; ++extern const char linux_proc_banner[]; ++ ++#define INT_MAX ((int)(~0U>>1)) ++#define INT_MIN (-INT_MAX - 1) ++#define UINT_MAX (~0U) ++#define LONG_MAX ((long)(~0UL>>1)) ++#define LONG_MIN (-LONG_MAX - 1) ++#define ULONG_MAX (~0UL) ++#define LLONG_MAX ((long long)(~0ULL>>1)) ++#define LLONG_MIN (-LLONG_MAX - 1) ++#define ULLONG_MAX (~0ULL) ++ ++#define STACK_MAGIC 0xdeadbeef ++ ++#define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1) ++#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) ++ ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) ++#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) ++#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) ++ ++#define KERN_EMERG "<0>" /* system is unusable */ ++#define KERN_ALERT "<1>" /* action must be taken immediately */ ++#define KERN_CRIT "<2>" /* critical conditions */ ++#define KERN_ERR "<3>" /* error conditions */ ++#define KERN_WARNING "<4>" /* warning conditions */ ++#define KERN_NOTICE "<5>" /* normal but significant condition */ ++#define KERN_INFO "<6>" /* informational */ ++#define KERN_DEBUG "<7>" /* debug-level messages */ ++ ++extern int console_printk[]; ++ ++#define console_loglevel (console_printk[0]) ++#define default_message_loglevel (console_printk[1]) ++#define minimum_console_loglevel (console_printk[2]) ++#define default_console_loglevel (console_printk[3]) ++ ++struct completion; ++struct pt_regs; ++struct user; ++ ++/** ++ * might_sleep - annotation for functions that can sleep ++ * ++ * this macro will print a stack trace if it is executed in an atomic ++ * context (spinlock, irq-handler, ...). ++ * ++ * This is a useful debugging help to be able to catch problems early and not ++ * be bitten later when the calling function happens to sleep when it is not ++ * supposed to. ++ */ ++#ifdef CONFIG_PREEMPT_VOLUNTARY ++extern int cond_resched(void); ++# define might_resched() cond_resched() ++#else ++# define might_resched() do { } while (0) ++#endif ++ ++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP ++ void __might_sleep(char *file, int line); ++# define might_sleep() \ ++ do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0) ++#else ++# define might_sleep() do { might_resched(); } while (0) ++#endif ++ ++#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0) ++ ++#define abs(x) ({ \ ++ int __x = (x); \ ++ (__x < 0) ? -__x : __x; \ ++ }) ++ ++extern struct atomic_notifier_head panic_notifier_list; ++extern long (*panic_blink)(long time); ++NORET_TYPE void panic(const char * fmt, ...) ++ __attribute__ ((NORET_AND format (printf, 1, 2))); ++extern void oops_enter(void); ++extern void oops_exit(void); ++extern int oops_may_print(void); ++fastcall NORET_TYPE void do_exit(long error_code) ++ ATTRIB_NORET; ++NORET_TYPE void complete_and_exit(struct completion *, long) ++ ATTRIB_NORET; ++extern unsigned long simple_strtoul(const char *,char **,unsigned int); ++extern long simple_strtol(const char *,char **,unsigned int); ++extern unsigned long long simple_strtoull(const char *,char **,unsigned int); ++extern long long simple_strtoll(const char *,char **,unsigned int); ++extern int sprintf(char * buf, const char * fmt, ...) ++ __attribute__ ((format (printf, 2, 3))); ++extern int vsprintf(char *buf, const char *, va_list) ++ __attribute__ ((format (printf, 2, 0))); ++extern int snprintf(char * buf, size_t size, const char * fmt, ...) ++ __attribute__ ((format (printf, 3, 4))); ++extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) ++ __attribute__ ((format (printf, 3, 0))); ++extern int scnprintf(char * buf, size_t size, const char * fmt, ...) ++ __attribute__ ((format (printf, 3, 4))); ++extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args) ++ __attribute__ ((format (printf, 3, 0))); ++extern char *kasprintf(gfp_t gfp, const char *fmt, ...) ++ __attribute__ ((format (printf, 2, 3))); ++ ++extern int sscanf(const char *, const char *, ...) ++ __attribute__ ((format (scanf, 2, 3))); ++extern int vsscanf(const char *, const char *, va_list) ++ __attribute__ ((format (scanf, 2, 0))); ++ ++extern int get_option(char **str, int *pint); ++extern char *get_options(const char *str, int nints, int *ints); ++extern unsigned long long memparse(char *ptr, char **retptr); ++ ++extern int core_kernel_text(unsigned long addr); ++extern int __kernel_text_address(unsigned long addr); ++extern int kernel_text_address(unsigned long addr); ++struct pid; ++extern struct pid *session_of_pgrp(struct pid *pgrp); ++ ++extern void dump_thread(struct pt_regs *regs, struct user *dump); ++ ++#ifdef CONFIG_PRINTK ++asmlinkage int vprintk(const char *fmt, va_list args) ++ __attribute__ ((format (printf, 1, 0))); ++asmlinkage int printk(const char * fmt, ...) ++ __attribute__ ((format (printf, 1, 2))); ++#else ++static inline int vprintk(const char *s, va_list args) ++ __attribute__ ((format (printf, 1, 0))); ++static inline int vprintk(const char *s, va_list args) { return 0; } ++static inline int printk(const char *s, ...) ++ __attribute__ ((format (printf, 1, 2))); ++static inline int printk(const char *s, ...) { return 0; } ++#endif ++ ++unsigned long int_sqrt(unsigned long); ++ ++extern int printk_ratelimit(void); ++extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst); ++extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, ++ unsigned int interval_msec); ++ ++static inline void console_silent(void) ++{ ++ console_loglevel = 0; ++} ++ ++static inline void console_verbose(void) ++{ ++ if (console_loglevel) ++ console_loglevel = 15; ++} ++ ++extern void bust_spinlocks(int yes); ++extern void wake_up_klogd(void); ++extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ ++extern int panic_timeout; ++extern int panic_on_oops; ++extern int panic_on_unrecovered_nmi; ++extern int tainted; ++extern const char *print_tainted(void); ++extern void add_taint(unsigned); ++ ++/* Values used for system_state */ ++extern enum system_states { ++ SYSTEM_BOOTING, ++ SYSTEM_RUNNING, ++ SYSTEM_HALT, ++ SYSTEM_POWER_OFF, ++ SYSTEM_RESTART, ++ SYSTEM_SUSPEND_DISK, ++} system_state; ++ ++#define TAINT_PROPRIETARY_MODULE (1<<0) ++#define TAINT_FORCED_MODULE (1<<1) ++#define TAINT_UNSAFE_SMP (1<<2) ++#define TAINT_FORCED_RMMOD (1<<3) ++#define TAINT_MACHINE_CHECK (1<<4) ++#define TAINT_BAD_PAGE (1<<5) ++#define TAINT_USER (1<<6) ++ ++extern void dump_stack(void); ++ ++#ifdef DEBUG ++/* If you are writing a driver, please use dev_dbg instead */ ++#define pr_debug(fmt,arg...) \ ++ printk(KERN_DEBUG fmt,##arg) ++#else ++static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...) ++{ ++ return 0; ++} ++#endif ++ ++#define pr_info(fmt,arg...) \ ++ printk(KERN_INFO fmt,##arg) ++ ++/* ++ * Display an IP address in readable format. ++ */ ++ ++#define NIPQUAD(addr) \ ++ ((unsigned char *)&addr)[0], \ ++ ((unsigned char *)&addr)[1], \ ++ ((unsigned char *)&addr)[2], \ ++ ((unsigned char *)&addr)[3] ++#define NIPQUAD_FMT "%u.%u.%u.%u" ++ ++#define NIP6(addr) \ ++ ntohs((addr).s6_addr16[0]), \ ++ ntohs((addr).s6_addr16[1]), \ ++ ntohs((addr).s6_addr16[2]), \ ++ ntohs((addr).s6_addr16[3]), \ ++ ntohs((addr).s6_addr16[4]), \ ++ ntohs((addr).s6_addr16[5]), \ ++ ntohs((addr).s6_addr16[6]), \ ++ ntohs((addr).s6_addr16[7]) ++#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x" ++#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x" ++ ++#if defined(__LITTLE_ENDIAN) ++#define HIPQUAD(addr) \ ++ ((unsigned char *)&addr)[3], \ ++ ((unsigned char *)&addr)[2], \ ++ ((unsigned char *)&addr)[1], \ ++ ((unsigned char *)&addr)[0] ++#elif defined(__BIG_ENDIAN) ++#define HIPQUAD NIPQUAD ++#else ++#error "Please fix asm/byteorder.h" ++#endif /* __LITTLE_ENDIAN */ ++ ++/* ++ * min()/max() macros that also do ++ * strict type-checking.. See the ++ * "unnecessary" pointer comparison. ++ */ ++#define min(x,y) ({ \ ++ typeof(x) _x = (x); \ ++ typeof(y) _y = (y); \ ++ (void) (&_x == &_y); \ ++ _x < _y ? _x : _y; }) ++ ++#define max(x,y) ({ \ ++ typeof(x) _x = (x); \ ++ typeof(y) _y = (y); \ ++ (void) (&_x == &_y); \ ++ _x > _y ? _x : _y; }) ++ ++/* ++ * ..and if you can't take the strict ++ * types, you can specify one yourself. ++ * ++ * Or not use min/max at all, of course. ++ */ ++#define min_t(type,x,y) \ ++ ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) ++#define max_t(type,x,y) \ ++ ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; }) ++ ++ ++/** ++ * container_of - cast a member of a structure out to the containing structure ++ * @ptr: the pointer to the member. ++ * @type: the type of the container struct this is embedded in. ++ * @member: the name of the member within the struct. ++ * ++ */ ++#define container_of(ptr, type, member) ({ \ ++ const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ++ (type *)( (char *)__mptr - offsetof(type,member) );}) ++ ++/* ++ * Check at compile time that something is of a particular type. ++ * Always evaluates to 1 so you may use it easily in comparisons. ++ */ ++#define typecheck(type,x) \ ++({ type __dummy; \ ++ typeof(x) __dummy2; \ ++ (void)(&__dummy == &__dummy2); \ ++ 1; \ ++}) ++ ++/* ++ * Check at compile time that 'function' is a certain type, or is a pointer ++ * to that type (needs to use typedef for the function type.) ++ */ ++#define typecheck_fn(type,function) \ ++({ typeof(type) __tmp = function; \ ++ (void)__tmp; \ ++}) ++ ++struct sysinfo; ++extern int do_sysinfo(struct sysinfo *info); ++ ++#endif /* __KERNEL__ */ ++ ++#define SI_LOAD_SHIFT 16 ++struct sysinfo { ++ long uptime; /* Seconds since boot */ ++ unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ ++ unsigned long totalram; /* Total usable main memory size */ ++ unsigned long freeram; /* Available memory size */ ++ unsigned long sharedram; /* Amount of shared memory */ ++ unsigned long bufferram; /* Memory used by buffers */ ++ unsigned long totalswap; /* Total swap space size */ ++ unsigned long freeswap; /* swap space still available */ ++ unsigned short procs; /* Number of current processes */ ++ unsigned short pad; /* explicit padding for m68k */ ++ unsigned long totalhigh; /* Total high memory size */ ++ unsigned long freehigh; /* Available high memory size */ ++ unsigned int mem_unit; /* Memory unit size in bytes */ ++ char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ ++}; ++ ++/* Force a compilation error if condition is true */ ++#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) ++ ++/* Force a compilation error if condition is true, but also produce a ++ result (of value 0 and type size_t), so the expression can be used ++ e.g. in a structure initializer (or where-ever else comma expressions ++ aren't permitted). */ ++#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1) ++ ++/* Trap pasters of __FUNCTION__ at compile-time */ ++#define __FUNCTION__ (__func__) ++ ++/* This helps us to avoid #ifdef CONFIG_NUMA */ ++#ifdef CONFIG_NUMA ++#define NUMA_BUILD 1 ++#else ++#define NUMA_BUILD 0 ++#endif ++ ++#endif diff --git a/target/linux/generic-2.6/config-template b/target/linux/generic-2.6/config-template index 164048a8d..1c1d57077 100644 --- a/target/linux/generic-2.6/config-template +++ b/target/linux/generic-2.6/config-template @@ -1343,6 +1343,7 @@ CONFIG_USB_EZUSB=y CONFIG_USB_KAWETH=m # CONFIG_USB_KBD is not set # CONFIG_USB_KBTAB is not set +# CONFIG_USB_KC2190 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LD is not set @@ -1356,6 +1357,7 @@ CONFIG_USB_KAWETH=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_NET1080=m @@ -1380,6 +1382,7 @@ CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CP2101=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m |