summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch157
1 files changed, 111 insertions, 46 deletions
diff --git a/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch b/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch
index 0611a0bca..ee88128ae 100644
--- a/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch
+++ b/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch
@@ -1,3 +1,109 @@
+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt 2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,67 @@
++**** ****
++**** HOWTO get bcm43xx-dscape running ****
++**** ****
++
++This is a port of the bcm43xx driver for the devicescape ieee802.11
++stack. The devicescape ieee802.11 stack is an advanced out-of-mainline
++802.11 protocol module.
++I will call the "devicescape ieee802.11 stack" simply "dscape" in the
++following text.
++
++
++*** Setting up the bcm43xx driver with dscape is currently non-trivial,
++*** as several modifications to the kernel and the userland
++*** wpa_supplicant tool are required. We are working on it...
++
++
++1) You need to patch the kernel with the ieee80211-devicescape stack
++ and the bcm43xx-dscape port.
++ Both are available in one cummulative at:
++ ftp://ftp.bu3sch.de/bcm43xx-snapshots/all-in-one/bcm43xx-dscape/
++ Read the instructions on http://bcm43xx.berlios.de/ for how to apply
++ this patch.
++
++ Patch the kernel, compile and install it.
++ When configuring, enable
++ "Networking/Generic IEEE 802.11 Networking Stack (dscape)"
++ and
++ "Device Drivers/Network device support/Wireless LAN (non-hamradio)/Broadcom BCM43xx wireless support (DeviceScape stack)"
++ Reboot.
++
++2) Set up a wpa_supplicant config file in /etc/wpa_supplicant.conf
++ Here is an example for an AES WPA encrypted network:
++
++ # WPA AES encryption
++ ctrl_interface=/var/run/wpa_supplicant
++ network={
++ ssid="ACCESSPOINT_SSID"
++ key_mgmt=WPA-PSK
++ proto=WPA
++ pairwise=CCMP TKIP
++ group=CCMP TKIP
++ psk="MY PASSPHRASE"
++ priority=3
++ }
++
++3) Take a bottle of your favourite beer, open it and take a swallow.
++
++4) Now it's time to bring the driver up.
++ Do modprobe bcm43xx-d80211 to load the driver.
++ There is an ugly bash script to bring the driver up after insmod.
++ It is found in the "scripts" subdirectory of the patched kernel
++ tree and is called "bcm43xx-d80211-sta_up.sh".
++ Call scripts/bcm43xx-d80211-sta_up.sh --help to get some usage information.
++ It may suffice to call scripts/bcm43xx-d80211-sta_up.sh without any parameters. See
++ the help. Default parameters, which are used when called without parameters,
++ are explained there.
++
++5) If you want to access the internet, make sure your default route
++ is correctly set up with your gateway's IP:
++ route add default gw 192.168.xxx.xxx
++
++6) Take another swallow from your bottle of beer and test if it works:
++ ping www.kernel.org
++
++7) If it works, drink the rest of your beer. Otherwise read this HOWTO again,
++ and again and again. Complain to bcm43xx-dev@lists.berlios.de, if it still
++ does not work.
+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt 2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,31 @@
++
++ BCM43xx Linux Driver Project
++ ============================
++
++About this software
++-------------------
++
++The goal of this project is to develop a linux driver for Broadcom
++BCM43xx chips, based on the specification at
++http://bcm-specs.sipsolutions.net/
++
++The project page is http://bcm43xx.berlios.de/
++
++This is a port of the bcm43xx driver for the devicescape ieee802.11
++stack.
++
++Requirements
++------------
++
++1) Linux Kernel 2.6.16 or later
++ http://www.kernel.org/
++
++ See Documentation/networking/bcm43xx-d80211-HOWTO.txt for further
++ instructions.
++
++2) Firmware Files
++
++ Please try bcm43xx-fwcutter. It can extract the firmware from various
++ binary driver files and supports driver files from Windows, MacOS and
++ Linux. You can get bcm43xx-fwcutter from http://bcm43xx.berlios.de/.
++ Also, bcm43xx-fwcutter comes with a README file for further instructions.
diff -Nur linux-2.6.16/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c linux-2.6.16-bcm43xx/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c
--- linux-2.6.16/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.16-bcm43xx/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c 2006-03-28 22:16:14.000000000 +0200
@@ -16609,61 +16715,20 @@ diff -Nur linux-2.6.16/include/net/sock.h linux-2.6.16-bcm43xx/include/net/sock.
diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
--- linux-2.6.16/net/core/dev.c 2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-bcm43xx/net/core/dev.c 2006-03-28 22:16:14.000000000 +0200
++++ linux-2.6.16-bcm43xx/net/core/dev.c 2006-03-29 14:12:58.000000000 +0200
@@ -110,10 +110,8 @@
#include <linux/netpoll.h>
#include <linux/rcupdate.h>
#include <linux/delay.h>
-#ifdef CONFIG_NET_RADIO
-#include <linux/wireless.h> /* Note : will define WIRELESS_EXT */
-+#include <linux/wireless.h>
++#include <linux/wireless.h> /* Note : will define CONFIG_WIRELESS_EXT */
#include <net/iw_handler.h>
-#endif /* CONFIG_NET_RADIO */
#include <asm/current.h>
/*
-@@ -1448,8 +1446,29 @@
- {
- struct net_device *dev = skb->dev;
-
-- if (dev->master)
-+ if (dev->master) {
-+ /*
-+ * On bonding slaves other than the currently active
-+ * slave, suppress duplicates except for 802.3ad
-+ * ETH_P_SLOW and alb non-mcast/bcast.
-+ */
-+ if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
-+ if (dev->master->priv_flags & IFF_MASTER_ALB) {
-+ if (skb->pkt_type != PACKET_BROADCAST &&
-+ skb->pkt_type != PACKET_MULTICAST)
-+ goto keep;
-+ }
-+
-+ if (dev->master->priv_flags & IFF_MASTER_8023AD &&
-+ skb->protocol == __constant_htons(ETH_P_SLOW))
-+ goto keep;
-+
-+ kfree_skb(skb);
-+ return NULL;
-+ }
-+keep:
- skb->dev = dev->master;
-+ }
-
- return dev;
- }
-@@ -1593,6 +1612,9 @@
-
- orig_dev = skb_bond(skb);
-
-+ if (!orig_dev)
-+ return NET_RX_DROP;
-+
- __get_cpu_var(netdev_rx_stat).total++;
-
- skb->h.raw = skb->nh.raw = skb->data;
-@@ -2028,7 +2050,7 @@
+@@ -2028,7 +2026,7 @@
.release = seq_release,
};
@@ -16672,7 +16737,7 @@ diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
extern int wireless_proc_init(void);
#else
#define wireless_proc_init() 0
-@@ -2582,7 +2604,7 @@
+@@ -2582,7 +2580,7 @@
ret = -EFAULT;
return ret;
}
@@ -16681,7 +16746,7 @@ diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
/* Take care of Wireless Extensions */
if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
/* If command is `set a parameter', or
-@@ -2603,7 +2625,7 @@
+@@ -2603,7 +2601,7 @@
ret = -EFAULT;
return ret;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 15:28:27 +0000