summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/aruba-2.6/config/default2
-rw-r--r--target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c2
-rw-r--r--target/linux/aruba-2.6/patches/000-aruba.patch9159
-rw-r--r--target/linux/generic-2.6/config-template3
4 files changed, 9119 insertions, 47 deletions
diff --git a/target/linux/aruba-2.6/config/default b/target/linux/aruba-2.6/config/default
index a15c7340f..2b14b56ae 100644
--- a/target/linux/aruba-2.6/config/default
+++ b/target/linux/aruba-2.6/config/default
@@ -167,7 +167,7 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_STB810 is not set
# CONFIG_RTC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
diff --git a/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c b/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c
index de966c869..ef5e52aa0 100644
--- a/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c
+++ b/target/linux/aruba-2.6/files/drivers/char/watchdog/wdt_merlot.c
@@ -4,6 +4,8 @@
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/target/linux/aruba-2.6/patches/000-aruba.patch b/target/linux/aruba-2.6/patches/000-aruba.patch
index 7317685c5..804bf2f22 100644
--- a/target/linux/aruba-2.6/patches/000-aruba.patch
+++ b/target/linux/aruba-2.6/patches/000-aruba.patch
@@ -1,9 +1,9 @@
-diff -Nur linux-2.6.17/arch/mips/Kconfig linux-2.6.17-owrt/arch/mips/Kconfig
---- linux-2.6.17/arch/mips/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/mips/Kconfig 2006-06-18 12:44:28.000000000 +0200
-@@ -227,6 +227,17 @@
- either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- a kernel for this platform.
+diff -Nur linux-2.6.21.1/arch/mips/Kconfig linux-2.6.21.1-owrt/arch/mips/Kconfig
+--- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/mips/Kconfig 2007-05-23 23:34:01.000000000 +0200
+@@ -220,6 +220,17 @@
+ <http://www.marvell.com/>. Say Y here if you wish to build a
+ kernel for this platform.
+config MACH_ARUBA
+ bool "Support for the ARUBA product line"
@@ -19,10 +19,10 @@ diff -Nur linux-2.6.17/arch/mips/Kconfig linux-2.6.17-owrt/arch/mips/Kconfig
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
-diff -Nur linux-2.6.17/arch/mips/Makefile linux-2.6.17-owrt/arch/mips/Makefile
---- linux-2.6.17/arch/mips/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/mips/Makefile 2006-06-18 12:44:28.000000000 +0200
-@@ -145,6 +145,14 @@
+diff -Nur linux-2.6.21.1/arch/mips/Makefile linux-2.6.21.1-owrt/arch/mips/Makefile
+--- linux-2.6.21.1/arch/mips/Makefile 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/mips/Makefile 2007-05-23 23:34:01.000000000 +0200
+@@ -158,6 +158,14 @@
#
#
@@ -37,13 +37,666 @@ diff -Nur linux-2.6.17/arch/mips/Makefile linux-2.6.17-owrt/arch/mips/Makefile
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig
---- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/Kconfig 2006-06-18 12:44:28.000000000 +0200
-@@ -187,6 +187,13 @@
+diff -Nur linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-owrt/arch/mips/pci/Makefile
+--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/mips/pci/Makefile 2007-05-23 23:36:48.000000000 +0200
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
++obj-$(CONFIG_MACH_ARUBA) += fixup-aruba.o ops-aruba.o pci-aruba.o
+diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile
+--- linux-2.6.21.1/drivers/char/watchdog/Makefile 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile 2007-05-23 23:36:53.000000000 +0200
+@@ -82,5 +82,8 @@
+
+ # SPARC64 Architecture
+
++# Aruba Architecture
++obj-$(CONFIG_MACH_ARUBA) += wdt_merlot.o
++
+ # Architecture Independant
+ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile.orig linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig
+--- linux-2.6.21.1/drivers/char/watchdog/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,86 @@
++#
++# Makefile for the WatchDog device drivers.
++#
++
++# Only one watchdog can succeed. We probe the ISA/PCI/USB based
++# watchdog-cards first, then the architecture specific watchdog
++# drivers and then the architecture independant "softdog" driver.
++# This means that if your ISA/PCI/USB card isn't detected that
++# you can fall back to an architecture specific driver and if
++# that also fails then you can fall back to the software watchdog
++# to give you some cover.
++
++# ISA-based Watchdog Cards
++obj-$(CONFIG_PCWATCHDOG) += pcwd.o
++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
++obj-$(CONFIG_WDT) += wdt.o
++
++# PCI-based Watchdog Cards
++obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
++obj-$(CONFIG_WDTPCI) += wdt_pci.o
++
++# USB-based Watchdog Cards
++obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
++
++# ARM Architecture
++obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
++obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
++obj-$(CONFIG_977_WATCHDOG) += wdt977.o
++obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
++obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
++obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
++obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
++obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
++obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
++obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
++
++# X86 (i386 + ia64 + x86_64) Architecture
++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
++obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
++obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_IBMASR) += ibmasr.o
++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
++obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
++obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
++obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
++obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
++obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
++obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
++obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
++obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
++obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
++obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
++obj-$(CONFIG_MACHZ_WDT) += machzwd.o
++obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
++
++# PowerPC Architecture
++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
++obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
++obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
++
++# PPC64 Architecture
++obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
++
++# MIPS Architecture
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
++
++# S390 Architecture
++
++# SUPERH Architecture
++obj-$(CONFIG_SH_WDT) += shwdt.o
++
++# SPARC64 Architecture
++
++# Architecture Independant
++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c
+--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c 2007-05-23 23:36:42.000000000 +0200
+@@ -25,6 +25,74 @@
+ static void print_cfi_ident(struct cfi_ident *);
+ #endif
+
++#if 1
++
++#define AMD_AUTOSEL_OFF1 0xAAA
++#define AMD_AUTOSEL_OFF2 0x555
++#define AMD_MANUF_ID 0x1
++#define AMD_DEVICE_ID1 0xF6 /* T */
++#define AMD_DEVICE_ID2 0xF9 /* B */
++/* Foll. are definitions for Macronix Flash Part */
++#define MCX_MANUF_ID 0xC2
++#define MCX_DEVICE_ID1 0xA7
++#define MCX_DEVICE_ID2 0xA8
++/* Foll. common to both AMD and Macronix */
++#define FACTORY_LOCKED 0x99
++#define USER_LOCKED 0x19
++
++/* NOTE: AP-70/6x use BYTE mode flash access. Therefore the
++ * lowest Addr. pin in the flash is not A0 but A-1 (A minus 1).
++ * CPU's A0 is tied to Flash's A-1, A1 to A0 and so on. This
++ * gives 4MB of byte-addressable mem. In byte mode, all addr
++ * need to be multiplied by 2 (i.e compared to word mode).
++ * NOTE: AMD_AUTOSEL_OFF1 and OFF2 are already mult. by 2
++ * Just blindly use the addr offsets suggested in the manual
++ * for byte mode and you'll be OK. Offs. in Table 6 need to
++ * be mult by 2 (for getting autosel params)
++ */
++void
++flash_detect(struct map_info *map, __u32 base, struct cfi_private *cfi)
++{
++ map_word val[3];
++ int osf = cfi->interleave * cfi->device_type; // =2 for AP70/6x
++ char *manuf, *part, *lock ;
++
++ if (osf != 1) return ;
++
++ cfi_send_gen_cmd(0xAA, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, AMD_AUTOSEL_OFF2, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x90, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
++ val[0] = map_read(map, base) ; // manuf ID
++ val[1] = map_read(map, base+2) ; // device ID
++ val[2] = map_read(map, base+6) ; // lock indicator
++#if 0
++printk("v1=0x%x v2=0x%x v3=0x%x\n", val[0], val[1], val[2]) ;
++#endif
++ if (val[0].x[0] == AMD_MANUF_ID) {
++ manuf = "AMD Flash" ;
++ if (val[1].x[0] == AMD_DEVICE_ID1)
++ part = "AM29LV320D (Top)" ;
++ else if (val[1].x[0] == AMD_DEVICE_ID2)
++ part = "AM29LV320D (Bot)" ;
++ else part = "Unknown" ;
++ } else if (val[0].x[0] == MCX_MANUF_ID) {
++ manuf = "Macronix Flash" ;
++ if (val[1].x[0] == MCX_DEVICE_ID1)
++ part = "MX29LV320A (Top)" ;
++ else if (val[1].x[0] == MCX_DEVICE_ID2)
++ part = "MX29LV320A (Bot)" ;
++ else part = "Unknown" ;
++ } else
++ return ;
++ if (val[2].x[0] == FACTORY_LOCKED)
++ lock = "Factory Locked" ;
++ else if (val[2].x[0] == USER_LOCKED)
++ lock = "User Locked" ;
++ else lock = "Unknown locking" ;
++ printk("%s %s (%s)\n", manuf, part, lock) ;
++}
++#endif
++
+ static int cfi_probe_chip(struct map_info *map, __u32 base,
+ unsigned long *chip_map, struct cfi_private *cfi);
+ static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
+@@ -117,6 +185,10 @@
+ }
+
+ xip_disable();
++#if 1
++ //cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
++ flash_detect(map, base, cfi) ;
++#endif
+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig
+--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,444 @@
++/*
++ Common Flash Interface probe code.
++ (C) 2000 Red Hat. GPL'd.
++ $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
++*/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <asm/byteorder.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++
++#include <linux/mtd/xip.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/cfi.h>
++#include <linux/mtd/gen_probe.h>
++
++//#define DEBUG_CFI
++
++#ifdef DEBUG_CFI
++static void print_cfi_ident(struct cfi_ident *);
++#endif
++
++static int cfi_probe_chip(struct map_info *map, __u32 base,
++ unsigned long *chip_map, struct cfi_private *cfi);
++static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
++
++struct mtd_info *cfi_probe(struct map_info *map);
++
++#ifdef CONFIG_MTD_XIP
++
++/* only needed for short periods, so this is rather simple */
++#define xip_disable() local_irq_disable()
++
++#define xip_allowed(base, map) \
++do { \
++ (void) map_read(map, base); \
++ asm volatile (".rep 8; nop; .endr"); \
++ local_irq_enable(); \
++} while (0)
++
++#define xip_enable(base, map, cfi) \
++do { \
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
++ xip_allowed(base, map); \
++} while (0)
++
++#define xip_disable_qry(base, map, cfi) \
++do { \
++ xip_disable(); \
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
++ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
++} while (0)
++
++#else
++
++#define xip_disable() do { } while (0)
++#define xip_allowed(base, map) do { } while (0)
++#define xip_enable(base, map, cfi) do { } while (0)
++#define xip_disable_qry(base, map, cfi) do { } while (0)
++
++#endif
++
++/* check for QRY.
++ in: interleave,type,mode
++ ret: table index, <0 for error
++ */
++static int __xipram qry_present(struct map_info *map, __u32 base,
++ struct cfi_private *cfi)
++{
++ int osf = cfi->interleave * cfi->device_type; // scale factor
++ map_word val[3];
++ map_word qry[3];
++
++ qry[0] = cfi_build_cmd('Q', map, cfi);
++ qry[1] = cfi_build_cmd('R', map, cfi);
++ qry[2] = cfi_build_cmd('Y', map, cfi);
++
++ val[0] = map_read(map, base + osf*0x10);
++ val[1] = map_read(map, base + osf*0x11);
++ val[2] = map_read(map, base + osf*0x12);
++
++ if (!map_word_equal(map, qry[0], val[0]))
++ return 0;
++
++ if (!map_word_equal(map, qry[1], val[1]))
++ return 0;
++
++ if (!map_word_equal(map, qry[2], val[2]))
++ return 0;
++
++ return 1; // "QRY" found
++}
++
++static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
++ unsigned long *chip_map, struct cfi_private *cfi)
++{
++ int i;
++
++ if ((base + 0) >= map->size) {
++ printk(KERN_NOTICE
++ "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
++ (unsigned long)base, map->size -1);
++ return 0;
++ }
++ if ((base + 0xff) >= map->size) {
++ printk(KERN_NOTICE
++ "Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
++ (unsigned long)base + 0x55, map->size -1);
++ return 0;
++ }
++
++ xip_disable();
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
++
++ if (!qry_present(map,base,cfi)) {
++ xip_enable(base, map, cfi);
++ return 0;
++ }
++
++ if (!cfi->numchips) {
++ /* This is the first time we're called. Set up the CFI
++ stuff accordingly and return */
++ return cfi_chip_setup(map, cfi);
++ }
++
++ /* Check each previous chip to see if it's an alias */
++ for (i=0; i < (base >> cfi->chipshift); i++) {
++ unsigned long start;
++ if(!test_bit(i, chip_map)) {
++ /* Skip location; no valid chip at this address */
++ continue;
++ }
++ start = i << cfi->chipshift;
++ /* This chip should be in read mode if it's one
++ we've already touched. */
++ if (qry_present(map, start, cfi)) {
++ /* Eep. This chip also had the QRY marker.
++ * Is it an alias for the new one? */
++ cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
++
++ /* If the QRY marker goes away, it's an alias */
++ if (!qry_present(map, start, cfi)) {
++ xip_allowed(base, map);
++ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
++ map->name, base, start);
++ return 0;
++ }
++ /* Yes, it's actually got QRY for data. Most
++ * unfortunate. Stick the new chip in read mode
++ * too and if it's the same, assume it's an alias. */
++ /* FIXME: Use other modes to do a proper check */
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
++
++ if (qry_present(map, base, cfi)) {
++ xip_allowed(base, map);
++ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
++ map->name, base, start);
++ return 0;
++ }
++ }
++ }
++
++ /* OK, if we got to here, then none of the previous chips appear to
++ be aliases for the current one. */
++ set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
++ cfi->numchips++;
++
++ /* Put it back into Read Mode */
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
++ xip_allowed(base, map);
++
++ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
++ map->name, cfi->interleave, cfi->device_type*8, base,
++ map->bankwidth*8);
++
++ return 1;
++}
++
++static int __xipram cfi_chip_setup(struct map_info *map,
++ struct cfi_private *cfi)
++{
++ int ofs_factor = cfi->interleave*cfi->device_type;
++ __u32 base = 0;
++ int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
++ int i;
++
++ xip_enable(base, map, cfi);
++#ifdef DEBUG_CFI
++ printk("Number of erase regions: %d\n", num_erase_regions);
++#endif
++ if (!num_erase_regions)
++ return 0;
++
++ cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
++ if (!cfi->cfiq) {
++ printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
++ return 0;
++ }
++
++ memset(cfi->cfiq,0,sizeof(struct cfi_ident));
++
++ cfi->cfi_mode = CFI_MODE_CFI;
++
++ /* Read the CFI info structure */
++ xip_disable_qry(base, map, cfi);
++ for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
++ ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
++
++ /* Note we put the device back into Read Mode BEFORE going into Auto
++ * Select Mode, as some devices support nesting of modes, others
++ * don't. This way should always work.
++ * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
++ * so should be treated as nops or illegal (and so put the device
++ * back into Read Mode, which is a nop in this case).
++ */
++ cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
++ cfi->mfr = cfi_read_query16(map, base);
++ cfi->id = cfi_read_query16(map, base + ofs_factor);
++
++ /* Put it back into Read Mode */
++ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
++ /* ... even if it's an Intel chip */
++ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
++ xip_allowed(base, map);
++
++ /* Do any necessary byteswapping */
++ cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
++
++ cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
++ cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
++ cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
++ cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
++ cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
++
++#ifdef DEBUG_CFI
++ /* Dump the information therein */
++ print_cfi_ident(cfi->cfiq);
++#endif
++
++ for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
++ cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
++
++#ifdef DEBUG_CFI
++ printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
++ i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
++ (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
++#endif
++ }
++
++ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
++ map->name, cfi->interleave, cfi->device_type*8, base,
++ map->bankwidth*8);
++
++ return 1;
++}
++
++#ifdef DEBUG_CFI
++static char *vendorname(__u16 vendor)
++{
++ switch (vendor) {
++ case P_ID_NONE:
++ return "None";
++
++ case P_ID_INTEL_EXT:
++ return "Intel/Sharp Extended";
++
++ case P_ID_AMD_STD:
++ return "AMD/Fujitsu Standard";
++
++ case P_ID_INTEL_STD:
++ return "Intel/Sharp Standard";
++
++ case P_ID_AMD_EXT:
++ return "AMD/Fujitsu Extended";
++
++ case P_ID_WINBOND:
++ return "Winbond Standard";
++
++ case P_ID_ST_ADV:
++ return "ST Advanced";
++
++ case P_ID_MITSUBISHI_STD:
++ return "Mitsubishi Standard";
++
++ case P_ID_MITSUBISHI_EXT:
++ return "Mitsubishi Extended";
++
++ case P_ID_SST_PAGE:
++ return "SST Page Write";
++
++ case P_ID_INTEL_PERFORMANCE:
++ return "Intel Performance Code";
++
++ case P_ID_INTEL_DATA:
++ return "Intel Data";
++
++ case P_ID_RESERVED:
++ return "Not Allowed / Reserved for Future Use";
++
++ default:
++ return "Unknown";
++ }
++}
++
++
++static void print_cfi_ident(struct cfi_ident *cfip)
++{
++#if 0
++ if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
++ printk("Invalid CFI ident structure.\n");
++ return;
++ }
++#endif
++ printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
++ if (cfip->P_ADR)
++ printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
++ else
++ printk("No Primary Algorithm Table\n");
++
++ printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
++ if (cfip->A_ADR)
++ printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
++ else
++ printk("No Alternate Algorithm Table\n");
++
++
++ printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
++ printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
++ if (cfip->VppMin) {
++ printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
++ printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
++ }
++ else
++ printk("No Vpp line\n");
++
++ printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
++ printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
++
++ if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
++ printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
++ printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
++ }
++ else
++ printk("Full buffer write not supported\n");
++
++ printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
++ printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
++ if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
++ printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
++ printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
++ }
++ else
++ printk("Chip erase not supported\n");
++
++ printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
++ printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
++ switch(cfip->InterfaceDesc) {
++ case 0:
++ printk(" - x8-only asynchronous interface\n");
++ break;
++
++ case 1:
++ printk(" - x16-only asynchronous interface\n");
++ break;
++
++ case 2:
++ printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n");
++ break;
++
++ case 3:
++ printk(" - x32-only asynchronous interface\n");
++ break;
++
++ case 4:
++ printk(" - supports x16 and x32 via Word# with asynchronous interface\n");
++ break;
++
++ case 65535:
++ printk(" - Not Allowed / Reserved\n");
++ break;
++
++ default:
++ printk(" - Unknown\n");
++ break;
++ }
++
++ printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
++ printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
++
++}
++#endif /* DEBUG_CFI */
++
++static struct chip_probe cfi_chip_probe = {
++ .name = "CFI",
++ .probe_chip = cfi_probe_chip
++};
++
++struct mtd_info *cfi_probe(struct map_info *map)
++{
++ /*
++ * Just use the generic probe stuff to call our CFI-specific
++ * chip_probe routine in all the possible permutations, etc.
++ */
++ return mtd_do_chip_probe(map, &cfi_chip_probe);
++}
++
++static struct mtd_chip_driver cfi_chipdrv = {
++ .probe = cfi_probe,
++ .name = "cfi_probe",
++ .module = THIS_MODULE
++};
++
++static int __init cfi_probe_init(void)
++{
++ register_mtd_chip_driver(&cfi_chipdrv);
++ return 0;
++}
++
++static void __exit cfi_probe_exit(void)
++{
++ unregister_mtd_chip_driver(&cfi_chipdrv);
++}
++
++module_init(cfi_probe_init);
++module_exit(cfi_probe_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
++MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
+diff -Nur linux-2.6.21.1/drivers/net/Kconfig linux-2.6.21.1-owrt/drivers/net/Kconfig
+--- linux-2.6.21.1/drivers/net/Kconfig 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/net/Kconfig 2007-05-23 23:37:01.000000000 +0200
+@@ -201,6 +201,19 @@
source "drivers/net/arm/Kconfig"
++config AR2313
++ tristate "AR2313 Ethernet support"
++ depends on NET_ETHERNET && MACH_ARUBA
++ help
++ Support for the AR2313 Ethernet part on Aruba AP60/61
++
+config IDT_RC32434_ETH
+ tristate "IDT RC32434 Local Ethernet support"
+ depends on NET_ETHERNET
@@ -54,23 +707,3212 @@ diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -Nur linux-2.6.17/drivers/net/Makefile linux-2.6.17-owrt/drivers/net/Makefile
---- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/Makefile 2006-06-18 12:44:28.000000000 +0200
-@@ -38,6 +38,7 @@
+diff -Nur linux-2.6.21.1/drivers/net/Kconfig.orig linux-2.6.21.1-owrt/drivers/net/Kconfig.orig
+--- linux-2.6.21.1/drivers/net/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/net/Kconfig.orig 2007-05-23 23:34:01.000000000 +0200
+@@ -0,0 +1,2952 @@
++
++#
++# Network device configuration
++#
++
++menu "Network device support"
++ depends on NET
++
++config NETDEVICES
++ default y if UML
++ bool "Network device support"
++ ---help---
++ You can say N here if you don't intend to connect your Linux box to
++ any other computer at all.
++
++ You'll have to say Y if your computer contains a network card that
++ you want to use under Linux. If you are going to run SLIP or PPP over
++ telephone line or null modem cable you need say Y here. Connecting
++ two machines with parallel ports using PLIP needs this, as well as
++ AX.25/KISS for sending Internet traffic over amateur radio links.
++
++ See also "The Linux Network Administrator's Guide" by Olaf Kirch and
++ Terry Dawson. Available at <http://www.tldp.org/guides.html>.
++
++ If unsure, say Y.
++
++# All the following symbols are dependent on NETDEVICES - do not repeat
++# that for each of the symbols.
++if NETDEVICES
++
++config IFB
++ tristate "Intermediate Functional Block support"
++ depends on NET_CLS_ACT
++ ---help---
++ This is an intermediate driver that allows sharing of
++ resources.
++ To compile this driver as a module, choose M here: the module
++ will be called ifb. If you want to use more than one ifb
++ device at a time, you need to compile this driver as a module.
++ Instead of 'ifb', the devices will then be called 'ifb0',
++ 'ifb1' etc.
++ Look at the iproute2 documentation directory for usage etc
++
++config DUMMY
++ tristate "Dummy net driver support"
++ ---help---
++ This is essentially a bit-bucket device (i.e. traffic you send to
++ this device is consigned into oblivion) with a configurable IP
++ address. It is most commonly used in order to make your currently
++ inactive SLIP address seem like a real address for local programs.
++ If you use SLIP or PPP, you might want to say Y here. Since this
++ thing often comes in handy, the default is Y. It won't enlarge your
++ kernel either. What a deal. Read about it in the Network
++ Administrator's Guide, available from
++ <http://www.tldp.org/docs.html#guide>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called dummy. If you want to use more than one dummy
++ device at a time, you need to compile this driver as a module.
++ Instead of 'dummy', the devices will then be called 'dummy0',
++ 'dummy1' etc.
++
++config BONDING
++ tristate "Bonding driver support"
++ depends on INET
++ ---help---
++ Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
++ Channels together. This is called 'Etherchannel' by Cisco,
++ 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
++
++ The driver supports multiple bonding modes to allow for both high
++ performance and high availability operation.
++
++ Refer to <file:Documentation/networking/bonding.txt> for more
++ information.
++
++ To compile this driver as a module, choose M here: the module
++ will be called bonding.
++
++config EQUALIZER
++ tristate "EQL (serial line load balancing) support"
++ ---help---
++ If you have two serial connections to some other computer (this
++ usually requires two modems and two telephone lines) and you use
++ SLIP (the protocol for sending Internet traffic over telephone
++ lines) or PPP (a better SLIP) on them, you can make them behave like
++ one double speed connection using this driver. Naturally, this has
++ to be supported at the other end as well, either with a similar EQL
++ Linux driver or with a Livingston Portmaster 2e.
++
++ Say Y if you want this and read
++ <file:Documentation/networking/eql.txt>. You may also want to read
++ section 6.2 of the NET-3-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called eql. If unsure, say N.
++
++config TUN
++ tristate "Universal TUN/TAP device driver support"
++ select CRC32
++ ---help---
++ TUN/TAP provides packet reception and transmission for user space
++ programs. It can be viewed as a simple Point-to-Point or Ethernet
++ device, which instead of receiving packets from a physical media,
++ receives them from user space program and instead of sending packets
++ via physical media writes them to the user space program.
++
++ When a program opens /dev/net/tun, driver creates and registers
++ corresponding net device tunX or tapX. After a program closed above
++ devices, driver will automatically delete tunXX or tapXX device and
++ all routes corresponding to it.
++
++ Please read <file:Documentation/networking/tuntap.txt> for more
++ information.
++
++ To compile this driver as a module, choose M here: the module
++ will be called tun.
++
++ If you don't know what to use this for, you don't need it.
++
++config NET_SB1000
++ tristate "General Instruments Surfboard 1000"
++ depends on PNP
++ ---help---
++ This is a driver for the General Instrument (also known as
++ NextLevel) SURFboard 1000 internal
++ cable modem. This is an ISA card which is used by a number of cable
++ TV companies to provide cable modem access. It's a one-way
++ downstream-only cable modem, meaning that your upstream net link is
++ provided by your regular phone modem.
++
++ At present this driver only compiles as a module, so say M here if
++ you have this card. The module will be called sb1000. Then read
++ <file:Documentation/networking/README.sb1000> for information on how
++ to use this module, as it needs special ppp scripts for establishing
++ a connection. Further documentation and the necessary scripts can be
++ found at:
++
++ <http://www.jacksonville.net/~fventuri/>
++ <http://home.adelphia.net/~siglercm/sb1000.html>
++ <http://linuxpower.cx/~cable/>
++
++ If you don't have this card, of course say N.
++
++source "drivers/net/arcnet/Kconfig"
++
++source "drivers/net/phy/Kconfig"
++
++#
++# Ethernet
++#
++
++menu "Ethernet (10 or 100Mbit)"
++ depends on !UML
++
++config NET_ETHERNET
++ bool "Ethernet (10 or 100Mbit)"
++ ---help---
++ Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
++ type of Local Area Network (LAN) in universities and companies.
++
++ Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
++ coaxial cable, linking computers in a chain), 10BASE-T or twisted
++ pair (10 Mbps over twisted pair cable, linking computers to central
++ hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
++ 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
++ 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
++ cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
++ [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
++ Ethernet (1 Gbps over optical fiber or short copper links).
++
++ If your Linux machine will be connected to an Ethernet and you have
++ an Ethernet network interface card (NIC) installed in your computer,
++ say Y here and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. You will then also have
++ to say Y to the driver for your particular NIC.
++
++ Note that the answer to this question won't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about Ethernet network cards. If unsure, say N.
++
++config MII
++ tristate "Generic Media Independent Interface device support"
++ depends on NET_ETHERNET
++ help
++ Most ethernet controllers have MII transceiver either as an external
++ or internal device. It is safe to say Y or M here even if your
++ ethernet card lack MII.
++
++config MACB
++ tristate "Atmel MACB support"
++ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
++ select MII
++ help
++ The Atmel MACB ethernet interface is found on many AT32 and AT91
++ parts. Say Y to include support for the MACB chip.
++
++ To compile this driver as a module, choose M here: the module
++ will be called macb.
++
++source "drivers/net/arm/Kconfig"
++
++config IDT_RC32434_ETH
++ tristate "IDT RC32434 Local Ethernet support"
++ depends on NET_ETHERNET
++ help
++ IDT RC32434 has one local ethernet port. Say Y here to enable it.
++ To compile this driver as a module, choose M here.
++
++config MACE
++ tristate "MACE (Power Mac ethernet) support"
++ depends on NET_ETHERNET && PPC_PMAC && PPC32
++ select CRC32
++ help
++ Power Macintoshes and clones with Ethernet built-in on the
++ motherboard will usually use a MACE (Medium Access Control for
++ Ethernet) interface. Say Y to include support for the MACE chip.
++
++ To compile this driver as a module, choose M here: the module
++ will be called mace.
++
++config MACE_AAUI_PORT
++ bool "Use AAUI port instead of TP by default"
++ depends on MACE
++ help
++ Some Apple machines (notably the Apple Network Server) which use the
++ MACE ethernet chip have an Apple AUI port (small 15-pin connector),
++ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
++ Y here if you have such a machine. If unsure, say N.
++ The driver will default to AAUI on ANS anyway, and if you use it as
++ a module, you can provide the port_aaui=0|1 to force the driver.
++
++config BMAC
++ tristate "BMAC (G3 ethernet) support"
++ depends on NET_ETHERNET && PPC_PMAC && PPC32
++ select CRC32
++ help
++ Say Y for support of BMAC Ethernet interfaces. These are used on G3
++ computers.
++
++ To compile this driver as a module, choose M here: the module
++ will be called bmac.
++
++config ARIADNE
++ tristate "Ariadne support"
++ depends on NET_ETHERNET && ZORRO
++ help
++ If you have a Village Tronic Ariadne Ethernet adapter, say Y.
++ Otherwise, say N.
++
++ To compile this driver as a module, choose M here: the module
++ will be called ariadne.
++
++config A2065
++ tristate "A2065 support"
++ depends on NET_ETHERNET && ZORRO
++ select CRC32
++ help
++ If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
++ say N.
++
++ To compile this driver as a module, choose M here: the module
++ will be called a2065.
++
++config HYDRA
++ tristate "Hydra support"
++ depends on NET_ETHERNET && ZORRO
++ select CRC32
++ help
++ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
++
++ To compile this driver as a module, choose M here: the module
++ will be called hydra.
++
++config ZORRO8390
++ tristate "Zorro NS8390-based Ethernet support"
++ depends on NET_ETHERNET && ZORRO
++ select CRC32
++ help
++ This driver is for Zorro Ethernet cards using an NS8390-compatible
++ chipset, like the Village Tronic Ariadne II and the Individual
++ Computers X-Surf Ethernet cards. If you have such a card, say Y.
++ Otherwise, say N.
++
++ To compile this driver as a module, choose M here: the module
++ will be called zorro8390.
++
++config APNE
++ tristate "PCMCIA NE2000 support"
++ depends on NET_ETHERNET && AMIGA_PCMCIA
++ select CRC32
++ help
++ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
++ say N.
++
++ To compile this driver as a module, choose M here: the module
++ will be called apne.
++
++config APOLLO_ELPLUS
++ tristate "Apollo 3c505 support"
++ depends on NET_ETHERNET && APOLLO
++ help
++ Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
++ If you don't have one made for Apollos, you can use one from a PC,
++ except that your Apollo won't be able to boot from it (because the
++ code in the ROM will be for a PC).
++
++config MAC8390
++ bool "Macintosh NS 8390 based ethernet cards"
++ depends on NET_ETHERNET && MAC
++ select CRC32
++ help
++ If you want to include a driver to support Nubus or LC-PDS
++ Ethernet cards using an NS8390 chipset or its equivalent, say Y
++ and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++config MAC89x0
++ tristate "Macintosh CS89x0 based ethernet cards"
++ depends on NET_ETHERNET && MAC && BROKEN
++ ---help---
++ Support for CS89x0 chipset based Ethernet cards. If you have a
++ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
++ read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. This module will
++ be called mac89x0.
++
++config MACSONIC
++ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
++ depends on NET_ETHERNET && MAC
++ ---help---
++ Support for NatSemi SONIC based Ethernet devices. This includes
++ the onboard Ethernet in many Quadras as well as some LC-PDS,
++ a few Nubus and all known Comm Slot Ethernet cards. If you have
++ one of these say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. This module will
++ be called macsonic.
++
++config MACMACE
++ bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
++ depends on NET_ETHERNET && MAC && EXPERIMENTAL
++ select CRC32
++ help
++ Support for the onboard AMD 79C940 MACE Ethernet controller used in
++ the 660AV and 840AV Macintosh. If you have one of these Macintoshes
++ say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++config MVME147_NET
++ tristate "MVME147 (Lance) Ethernet support"
++ depends on NET_ETHERNET && MVME147
++ select CRC32
++ help
++ Support for the on-board Ethernet interface on the Motorola MVME147
++ single-board computer. Say Y here to include the
++ driver for this chip in your kernel.
++ To compile this driver as a module, choose M here.
++
++config MVME16x_NET
++ tristate "MVME16x Ethernet support"
++ depends on NET_ETHERNET && MVME16x
++ help
++ This is the driver for the Ethernet interface on the Motorola
++ MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
++ driver for this chip in your kernel.
++ To compile this driver as a module, choose M here.
++
++config BVME6000_NET
++ tristate "BVME6000 Ethernet support"
++ depends on NET_ETHERNET && BVME6000
++ help
++ This is the driver for the Ethernet interface on BVME4000 and
++ BVME6000 VME boards. Say Y here to include the driver for this chip
++ in your kernel.
++ To compile this driver as a module, choose M here.
++
++config ATARILANCE
++ tristate "Atari Lance support"
++ depends on NET_ETHERNET && ATARI
++ help
++ Say Y to include support for several Atari Ethernet adapters based
++ on the AMD Lance chipset: RieblCard (with or without battery), or
++ PAMCard VME (also the version by Rhotron, with different addresses).
++
++config ATARI_BIONET
++ tristate "BioNet-100 support"
++ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
++ help
++ Say Y to include support for BioData's BioNet-100 Ethernet adapter
++ for the ACSI port. The driver works (has to work...) with a polled
++ I/O scheme, so it's rather slow :-(
++
++config ATARI_PAMSNET
++ tristate "PAMsNet support"
++ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
++ help
++ Say Y to include support for the PAMsNet Ethernet adapter for the
++ ACSI port ("ACSI node"). The driver works (has to work...) with a
++ polled I/O scheme, so it's rather slow :-(
++
++config SUN3LANCE
++ tristate "Sun3/Sun3x on-board LANCE support"
++ depends on NET_ETHERNET && (SUN3 || SUN3X)
++ help
++ Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
++ featured an AMD Lance 10Mbit Ethernet controller on board; say Y
++ here to compile in the Linux driver for this and enable Ethernet.
++ General Linux information on the Sun 3 and 3x series (now
++ discontinued) is at
++ <http://www.angelfire.com/ca2/tech68k/sun3.html>.
++
++ If you're not building a kernel for a Sun 3, say N.
++
++config SUN3_82586
++ bool "Sun3 on-board Intel 82586 support"
++ depends on NET_ETHERNET && SUN3
++ help
++ This driver enables support for the on-board Intel 82586 based
++ Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
++ that this driver does not support 82586-based adapters on additional
++ VME boards.
++
++config HPLANCE
++ bool "HP on-board LANCE support"
++ depends on NET_ETHERNET && DIO
++ select CRC32
++ help
++ If you want to use the builtin "LANCE" Ethernet controller on an
++ HP300 machine, say Y here.
++
++config LASI_82596
++ tristate "Lasi ethernet"
++ depends on NET_ETHERNET && GSC
++ help
++ Say Y here to support the builtin Intel 82596 ethernet controller
++ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
++
++config MIPS_JAZZ_SONIC
++ tristate "MIPS JAZZ onboard SONIC Ethernet support"
++ depends on NET_ETHERNET && MACH_JAZZ
++ help
++ This is the driver for the onboard card of MIPS Magnum 4000,
++ Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
++
++config MIPS_AU1X00_ENET
++ bool "MIPS AU1000 Ethernet support"
++ depends on NET_ETHERNET && SOC_AU1X00
++ select PHYLIB
++ select CRC32
++ help
++ If you have an Alchemy Semi AU1X00 based system
++ say Y. Otherwise, say N.
++
++config NET_SB1250_MAC
++ tristate "SB1250 Ethernet support"
++ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
++
++config SGI_IOC3_ETH
++ bool "SGI IOC3 Ethernet"
++ depends on NET_ETHERNET && PCI && SGI_IP27
++ select CRC32
++ select MII
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++config SGI_IOC3_ETH_HW_RX_CSUM
++ bool "Receive hardware checksums"
++ depends on SGI_IOC3_ETH && INET
++ default y
++ help
++ The SGI IOC3 network adapter supports TCP and UDP checksums in
++ hardware to offload processing of these checksums from the CPU. At
++ the moment only acceleration of IPv4 is supported. This option
++ enables offloading for checksums on receive. If unsure, say Y.
++
++config SGI_IOC3_ETH_HW_TX_CSUM
++ bool "Transmit hardware checksums"
++ depends on SGI_IOC3_ETH && INET
++ default y
++ help
++ The SGI IOC3 network adapter supports TCP and UDP checksums in
++ hardware to offload processing of these checksums from the CPU. At
++ the moment only acceleration of IPv4 is supported. This option
++ enables offloading for checksums on transmit. If unsure, say Y.
++
++config MIPS_SIM_NET
++ tristate "MIPS simulator Network device (EXPERIMENTAL)"
++ depends on MIPS_SIM && EXPERIMENTAL
++ help
++ The MIPSNET device is a simple Ethernet network device which is
++ emulated by the MIPS Simulator.
++ If you are not using a MIPSsim or are unsure, say N.
++
++config SGI_O2MACE_ETH
++ tristate "SGI O2 MACE Fast Ethernet support"
++ depends on NET_ETHERNET && SGI_IP32=y
++
++config STNIC
++ tristate "National DP83902AV support"
++ depends on NET_ETHERNET && SUPERH
++ select CRC32
++ help
++ Support for cards based on the National Semiconductor DP83902AV
++ ST-NIC Serial Network Interface Controller for Twisted Pair. This
++ is a 10Mbit/sec Ethernet controller. Product overview and specs at
++ <http://www.national.com/pf/DP/DP83902A.html>.
++
++ If unsure, say N.
++
++config SUNLANCE
++ tristate "Sun LANCE support"
++ depends on NET_ETHERNET && SBUS
++ select CRC32
++ help
++ This driver supports the "le" interface present on all 32-bit Sparc
++ systems, on some older Ultra systems and as an Sbus option. These
++ cards are based on the AMD Lance chipset, which is better known
++ via the NE2100 cards.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sunlance.
++
++config HAPPYMEAL
++ tristate "Sun Happy Meal 10/100baseT support"
++ depends on NET_ETHERNET && (SBUS || PCI)
++ select CRC32
++ help
++ This driver supports the "hme" interface present on most Ultra
++ systems and as an option on older Sbus systems. This driver supports
++ both PCI and Sbus devices. This driver also supports the "qfe" quad
++ 100baseT device available in both PCI and Sbus configurations.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sunhme.
++
++config SUNBMAC
++ tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
++ depends on NET_ETHERNET && SBUS && EXPERIMENTAL
++ select CRC32
++ help
++ This driver supports the "be" interface available as an Sbus option.
++ This is Sun's older 100baseT Ethernet device.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sunbmac.
++
++config SUNQE
++ tristate "Sun QuadEthernet support"
++ depends on NET_ETHERNET && SBUS
++ select CRC32
++ help
++ This driver supports the "qe" 10baseT Ethernet device, available as
++ an Sbus option. Note that this is not the same as Quad FastEthernet
++ "qfe" which is supported by the Happy Meal driver instead.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sunqe.
++
++config SUNGEM
++ tristate "Sun GEM support"
++ depends on NET_ETHERNET && PCI
++ select CRC32
++ help
++ Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
++ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
++
++config CASSINI
++ tristate "Sun Cassini support"
++ depends on NET_ETHERNET && PCI
++ select CRC32
++ help
++ Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
++ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
++
++config NET_VENDOR_3COM
++ bool "3COM cards"
++ depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
++ help
++ If you have a network (Ethernet) card belonging to this class, say Y
++ and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about 3COM cards. If you say Y, you will be asked for
++ your specific card in the following questions.
++
++config EL1
++ tristate "3c501 \"EtherLink\" support"
++ depends on NET_VENDOR_3COM && ISA
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
++ new card, since the 3c501 is slow, broken, and obsolete: you will
++ have problems. Some people suggest to ping ("man ping") a nearby
++ machine every minute ("man cron") when using this card.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c501.
++
++config EL2
++ tristate "3c503 \"EtherLink II\" support"
++ depends on NET_VENDOR_3COM && ISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c503.
++
++config ELPLUS
++ tristate "3c505 \"EtherLink Plus\" support"
++ depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
++ ---help---
++ Information about this network (Ethernet) card can be found in
++ <file:Documentation/networking/3c505.txt>. If you have a card of
++ this type, say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c505.
++
++config EL16
++ tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
++ depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c507.
++
++config EL3
++ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
++ depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
++ ---help---
++ If you have a network (Ethernet) card belonging to the 3Com
++ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
++ from <http://www.tldp.org/docs.html#howto>.
++
++ If your card is not working you may need to use the DOS
++ setup disk to disable Plug & Play mode, and to select the default
++ media type.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c509.
++
++config 3C515
++ tristate "3c515 ISA \"Fast EtherLink\""
++ depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
++ help
++ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
++ network card, say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c515.
++
++config ELMC
++ tristate "3c523 \"EtherLink/MC\" support"
++ depends on NET_VENDOR_3COM && MCA_LEGACY
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c523.
++
++config ELMC_II
++ tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
++ depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called 3c527.
++
++config VORTEX
++ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
++ depends on NET_VENDOR_3COM && (PCI || EISA)
++ select MII
++ ---help---
++ This option enables driver support for a large number of 10Mbps and
++ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
++
++ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
++ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
++ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
++ "Tornado" (3c905) PCI
++ "Hurricane" (3c555/3cSOHO) PCI
++
++ If you have such a card, say Y and read the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>. More
++ specific information is in
++ <file:Documentation/networking/vortex.txt> and in the comments at
++ the beginning of <file:drivers/net/3c59x.c>.
++
++ To compile this support as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>.
++
++config TYPHOON
++ tristate "3cr990 series \"Typhoon\" support"
++ depends on NET_VENDOR_3COM && PCI
++ select CRC32
++ ---help---
++ This option enables driver support for the 3cr990 series of cards:
++
++ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
++ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
++ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
++
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called typhoon.
++
++config LANCE
++ tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
++ depends on NET_ETHERNET && ISA && ISA_DMA_API
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
++ of this type.
++
++ To compile this driver as a module, choose M here: the module
++ will be called lance. This is recommended.
++
++config NET_VENDOR_SMC
++ bool "Western Digital/SMC cards"
++ depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
++ help
++ If you have a network (Ethernet) card belonging to this class, say Y
++ and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about Western Digital cards. If you say Y, you will be
++ asked for your specific card in the following questions.
++
++config WD80x3
++ tristate "WD80*3 support"
++ depends on NET_VENDOR_SMC && ISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called wd.
++
++config ULTRAMCA
++ tristate "SMC Ultra MCA support"
++ depends on NET_VENDOR_SMC && MCA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type and are running
++ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called smc-mca.
++
++config ULTRA
++ tristate "SMC Ultra support"
++ depends on NET_VENDOR_SMC && ISA
++ select CRC32
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ Important: There have been many reports that, with some motherboards
++ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
++ such as some BusLogic models) causes corruption problems with many
++ operating systems. The Linux smc-ultra driver has a work-around for
++ this but keep it in mind if you have such a SCSI card and have
++ problems.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called smc-ultra.
++
++config ULTRA32
++ tristate "SMC Ultra32 EISA support"
++ depends on NET_VENDOR_SMC && EISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called smc-ultra32.
++
++config SMC91X
++ tristate "SMC 91C9x/91C1xxx support"
++ select CRC32
++ select MII
++ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
++ help
++ This is a driver for SMC's 91x series of Ethernet chipsets,
++ including the SMC91C94 and the SMC91C111. Say Y if you want it
++ compiled into the kernel, and read the file
++ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
++ available from <http://www.linuxdoc.org/docs.html#howto>.
++
++ This driver is also available as a module ( = code which can be
++ inserted in and removed from the running kernel whenever you want).
++ The module will be called smc91x. If you want to compile it as a
++ module, say M here and read <file:Documentation/modules.txt> as well
++ as <file:Documentation/networking/net-modules.txt>.
++
++config SMC9194
++ tristate "SMC 9194 support"
++ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
++ select CRC32
++ ---help---
++ This is support for the SMC9xxx based Ethernet cards. Choose this
++ option if you have a DELL laptop with the docking station, or
++ another SMC9192/9194 based chipset. Say Y if you want it compiled
++ into the kernel, and read the file
++ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called smc9194.
++
++config NET_NETX
++ tristate "NetX Ethernet support"
++ select MII
++ depends on NET_ETHERNET && ARCH_NETX
++ help
++ This is support for the Hilscher netX builtin Ethernet ports
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called netx-eth.
++
++config DM9000
++ tristate "DM9000 support"
++ depends on (ARM || MIPS) && NET_ETHERNET
++ select CRC32
++ select MII
++ ---help---
++ Support for DM9000 chipset.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called dm9000.
++
++config SMC911X
++ tristate "SMSC LAN911[5678] support"
++ select CRC32
++ select MII
++ depends on NET_ETHERNET && ARCH_PXA
++ help
++ This is a driver for SMSC's LAN911x series of Ethernet chipsets
++ including the new LAN9115, LAN9116, LAN9117, and LAN9118.
++ Say Y if you want it compiled into the kernel,
++ and read the Ethernet-HOWTO, available from
++ <http://www.linuxdoc.org/docs.html#howto>.
++
++ This driver is also available as a module. The module will be
++ called smc911x. If you want to compile it as a module, say M
++ here and read <file:Documentation/modules.txt>
++
++config NET_VENDOR_RACAL
++ bool "Racal-Interlan (Micom) NI cards"
++ depends on NET_ETHERNET && ISA
++ help
++ If you have a network (Ethernet) card belonging to this class, such
++ as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about NI cards. If you say Y, you will be asked for
++ your specific card in the following questions.
++
++config NI5010
++ tristate "NI5010 support (EXPERIMENTAL)"
++ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Note that this is still
++ experimental code.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ni5010.
++
++config NI52
++ tristate "NI5210 support"
++ depends on NET_VENDOR_RACAL && ISA
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ni52.
++
++config NI65
++ tristate "NI6510 support"
++ depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ni65.
++
++source "drivers/net/tulip/Kconfig"
++
++config AT1700
++ tristate "AT1700/1720 support (EXPERIMENTAL)"
++ depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
++ select CRC32
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called at1700.
++
++config DEPCA
++ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
++ depends on NET_ETHERNET && (ISA || EISA || MCA)
++ select CRC32
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto> as well as
++ <file:drivers/net/depca.c>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called depca.
++
++config HP100
++ tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
++ depends on NET_ETHERNET && (ISA || EISA || PCI)
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called hp100.
++
++config NET_ISA
++ bool "Other ISA cards"
++ depends on NET_ETHERNET && ISA
++ ---help---
++ If your network (Ethernet) card hasn't been mentioned yet and its
++ bus system (that's the way the cards talks to the other components
++ of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
++ Make sure you know the name of your card. Read the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>.
++
++ If unsure, say Y.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the remaining ISA network card questions. If you say Y, you will be
++ asked for your specific card in the following questions.
++
++config E2100
++ tristate "Cabletron E21xx support"
++ depends on NET_ISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called e2100.
++
++config EWRK3
++ tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
++ depends on NET_ISA
++ select CRC32
++ ---help---
++ This driver supports the DE203, DE204 and DE205 network (Ethernet)
++ cards. If this is for you, say Y and read
++ <file:Documentation/networking/ewrk3.txt> in the kernel source as
++ well as the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ewrk3.
++
++config EEXPRESS
++ tristate "EtherExpress 16 support"
++ depends on NET_ISA
++ ---help---
++ If you have an EtherExpress16 network (Ethernet) card, say Y and
++ read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Note that the Intel
++ EtherExpress16 card used to be regarded as a very poor choice
++ because the driver was very unreliable. We now have a new driver
++ that should do better.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called eexpress.
++
++config EEXPRESS_PRO
++ tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
++ depends on NET_ISA
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y. This
++ driver supports Intel i82595{FX,TX} based boards. Note however
++ that the EtherExpress PRO/100 Ethernet card has its own separate
++ driver. Please read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called eepro.
++
++config HPLAN_PLUS
++ tristate "HP PCLAN+ (27247B and 27252A) support"
++ depends on NET_ISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called hp-plus.
++
++config HPLAN
++ tristate "HP PCLAN (27245 and other 27xxx series) support"
++ depends on NET_ISA
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called hp.
++
++config LP486E
++ tristate "LP486E on board Ethernet"
++ depends on NET_ISA
++ help
++ Say Y here to support the 82596-based on-board Ethernet controller
++ for the Panther motherboard, which is one of the two shipped in the
++ Intel Professional Workstation.
++
++config ETH16I
++ tristate "ICL EtherTeam 16i/32 support"
++ depends on NET_ISA
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called eth16i.
++
++config NE2000
++ tristate "NE2000/NE1000 support"
++ depends on NET_ISA || (Q40 && m) || M32R
++ select CRC32
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
++ without a specific driver are compatible with NE2000.
++
++ If you have a PCI NE2000 card however, say N here and Y to "PCI
++ NE2000 and clone support" under "EISA, VLB, PCI and on board
++ controllers" below. If you have a NE2000 card and are running on
++ an MCA system (a bus system used on some IBM PS/2 computers and
++ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
++ below.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ne.
++
++config ZNET
++ tristate "Zenith Z-Note support (EXPERIMENTAL)"
++ depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
++ help
++ The Zenith Z-Note notebook computer has a built-in network
++ (Ethernet) card, and this is the Linux driver for it. Note that the
++ IBM Thinkpad 300 is compatible with the Z-Note and is also supported
++ by this driver. Read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++config SEEQ8005
++ tristate "SEEQ8005 support (EXPERIMENTAL)"
++ depends on NET_ISA && EXPERIMENTAL
++ help
++ This is a driver for the SEEQ 8005 network (Ethernet) card. If this
++ is for you, read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called seeq8005.
++
++config NE2_MCA
++ tristate "NE/2 (ne2000 MCA version) support"
++ depends on NET_ETHERNET && MCA_LEGACY
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ne2.
++
++config IBMLANA
++ tristate "IBM LAN Adapter/A support"
++ depends on NET_ETHERNET && MCA && MCA_LEGACY
++ ---help---
++ This is a Micro Channel Ethernet adapter. You need to set
++ CONFIG_MCA to use this driver. It is both available as an in-kernel
++ driver and as a module.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The only
++ currently supported card is the IBM LAN Adapter/A for Ethernet. It
++ will both support 16K and 32K memory windows, however a 32K window
++ gives a better security against packet losses. Usage of multiple
++ boards with this driver should be possible, but has not been tested
++ up to now due to lack of hardware.
++
++config IBMVETH
++ tristate "IBM LAN Virtual Ethernet support"
++ depends on NET_ETHERNET && PPC_PSERIES
++ ---help---
++ This driver supports virtual ethernet adapters on newer IBM iSeries
++ and pSeries systems.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will
++ be called ibmveth.
++
++config IBM_EMAC
++ tristate "PowerPC 4xx on-chip Ethernet support"
++ depends on 4xx
++ help
++ This driver supports the PowerPC 4xx EMAC family of on-chip
++ Ethernet controllers.
++
++config IBM_EMAC_RXB
++ int "Number of receive buffers"
++ depends on IBM_EMAC
++ default "128"
++
++config IBM_EMAC_TXB
++ int "Number of transmit buffers"
++ depends on IBM_EMAC
++ default "64"
++
++config IBM_EMAC_POLL_WEIGHT
++ int "MAL NAPI polling weight"
++ depends on IBM_EMAC
++ default "32"
++
++config IBM_EMAC_RX_COPY_THRESHOLD
++ int "RX skb copy threshold (bytes)"
++ depends on IBM_EMAC
++ default "256"
++
++config IBM_EMAC_RX_SKB_HEADROOM
++ int "Additional RX skb headroom (bytes)"
++ depends on IBM_EMAC
++ default "0"
++ help
++ Additional receive skb headroom. Note, that driver
++ will always reserve at least 2 bytes to make IP header
++ aligned, so usually there is no need to add any additional
++ headroom.
++
++ If unsure, set to 0.
++
++config IBM_EMAC_PHY_RX_CLK_FIX
++ bool "PHY Rx clock workaround"
++ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
++ help
++ Enable this if EMAC attached to a PHY which doesn't generate
++ RX clock if there is no link, if this is the case, you will
++ see "TX disable timeout" or "RX disable timeout" in the system
++ log.
++
++ If unsure, say N.
++
++config IBM_EMAC_DEBUG
++ bool "Debugging"
++ depends on IBM_EMAC
++ default n
++
++config IBM_EMAC_ZMII
++ bool
++ depends on IBM_EMAC && (NP405H || NP405L || 44x)
++ default y
++
++config IBM_EMAC_RGMII
++ bool
++ depends on IBM_EMAC && 440GX
++ default y
++
++config IBM_EMAC_TAH
++ bool
++ depends on IBM_EMAC && 440GX
++ default y
++
++config NET_PCI
++ bool "EISA, VLB, PCI and on board controllers"
++ depends on NET_ETHERNET && (ISA || EISA || PCI)
++ help
++ This is another class of network cards which attach directly to the
++ bus. If you have one of those, say Y and read the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about this class of network cards. If you say Y, you
++ will be asked for your specific card in the following questions. If
++ you are unsure, say Y.
++
++config PCNET32
++ tristate "AMD PCnet32 PCI support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
++ answer Y here and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called pcnet32.
++
++config PCNET32_NAPI
++ bool "Use RX polling (NAPI)"
++ depends on PCNET32
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config AMD8111_ETH
++ tristate "AMD 8111 (new PCI lance) support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ If you have an AMD 8111-based PCI lance ethernet card,
++ answer Y here and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called amd8111e.
++config AMD8111E_NAPI
++ bool "Enable NAPI support"
++ depends on AMD8111_ETH
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config ADAPTEC_STARFIRE
++ tristate "Adaptec Starfire/DuraLAN support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
++ adapter. The DuraLAN chip is used on the 64 bit PCI boards from
++ Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
++ driver.
++
++ To compile this driver as a module, choose M here: the module
++ will be called starfire. This is recommended.
++
++config ADAPTEC_STARFIRE_NAPI
++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
++ depends on ADAPTEC_STARFIRE && EXPERIMENTAL
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config AC3200
++ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
++ depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ac3200.
++
++config APRICOT
++ tristate "Apricot Xen-II on board Ethernet"
++ depends on NET_PCI && ISA
++ help
++ If you have a network (Ethernet) controller of this type, say Y and
++ read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called apricot.
++
++config B44
++ tristate "Broadcom 4400 ethernet support"
++ depends on NET_PCI && PCI
++ select MII
++ help
++ If you have a network (Ethernet) controller of this type, say Y and
++ read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called b44.
++
++config FORCEDETH
++ tristate "nForce Ethernet support"
++ depends on NET_PCI && PCI
++ help
++ If you have a network (Ethernet) controller of this type, say Y and
++ read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called forcedeth.
++
++config FORCEDETH_NAPI
++ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
++ depends on FORCEDETH && EXPERIMENTAL
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config CS89x0
++ tristate "CS89x0 support"
++ depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
++ ---help---
++ Support for CS89x0 chipset based Ethernet cards. If you have a
++ network (Ethernet) card of this type, say Y and read the
++ Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto> as well as
++ <file:Documentation/networking/cs89x0.txt>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called cs89x0.
++
++config TC35815
++ tristate "TOSHIBA TC35815 Ethernet support"
++ depends on NET_PCI && PCI && TOSHIBA_JMR3927
++
++config DGRS
++ tristate "Digi Intl. RightSwitch SE-X support"
++ depends on NET_PCI && (PCI || EISA)
++ ---help---
++ This is support for the Digi International RightSwitch series of
++ PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
++ models. If you have a network card of this type, say Y and read the
++ Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. More specific
++ information is contained in <file:Documentation/networking/dgrs.txt>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called dgrs.
++
++config EEPRO100
++ tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
++ depends on NET_PCI && PCI
++ select MII
++ help
++ If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
++ card, say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called eepro100.
++
++
++config E100
++ tristate "Intel(R) PRO/100+ support"
++ depends on NET_PCI && PCI
++ select MII
++ ---help---
++ This driver supports Intel(R) PRO/100 family of adapters.
++ To verify that your adapter is supported, find the board ID number
++ on the adapter. Look for a label that has a barcode and a number
++ in the format 123456-001 (six digits hyphen three digits).
++
++ Use the above information and the Adapter & Driver ID Guide at:
++
++ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
++
++ to identify the adapter.
++
++ For the latest Intel PRO/100 network driver for Linux, see:
++
++ <http://appsr.intel.com/scripts-df/support_intel.asp>
++
++ More specific information on configuring the driver is in
++ <file:Documentation/networking/e100.txt>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called e100.
++
++config LNE390
++ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
++ depends on NET_PCI && EISA && EXPERIMENTAL
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called lne390.
++
++config FEALNX
++ tristate "Myson MTD-8xx PCI Ethernet support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
++ cards. Specifications and data at
++ <http://www.myson.com.hk/mtd/datasheet/>.
++
++config NATSEMI
++ tristate "National Semiconductor DP8381x series PCI Ethernet support"
++ depends on NET_PCI && PCI
++ select CRC32
++ help
++ This driver is for the National Semiconductor DP83810 series,
++ which is used in cards from PureData, NetGear, Linksys
++ and others, including the 83815 chip.
++ More specific information and updates are available from
++ <http://www.scyld.com/network/natsemi.html>.
++
++config NE2K_PCI
++ tristate "PCI NE2000 and clones support (see help)"
++ depends on NET_PCI && PCI
++ select CRC32
++ ---help---
++ This driver is for NE2000 compatible PCI cards. It will not work
++ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
++ support" below). If you have a PCI NE2000 network (Ethernet) card,
++ say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ This driver also works for the following NE2000 clone cards:
++ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
++ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
++ Holtek HT80232 Holtek HT80229
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ne2k-pci.
++
++config NE3210
++ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
++ depends on NET_PCI && EISA && EXPERIMENTAL
++ select CRC32
++ ---help---
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>. Note that this driver
++ will NOT WORK for NE3200 cards as they are completely different.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ne3210.
++
++config ES3210
++ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
++ depends on NET_PCI && EISA && EXPERIMENTAL
++ select CRC32
++ help
++ If you have a network (Ethernet) card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called es3210.
++
++config 8139CP
++ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
++ depends on NET_PCI && PCI && EXPERIMENTAL
++ select CRC32
++ select MII
++ help
++ This is a driver for the Fast Ethernet PCI network cards based on
++ the RTL8139C+ chips. If you have one of those, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called 8139cp. This is recommended.
++
++config 8139TOO
++ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ ---help---
++ This is a driver for the Fast Ethernet PCI network cards based on
++ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
++ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called 8139too. This is recommended.
++
++config 8139TOO_PIO
++ bool "Use PIO instead of MMIO"
++ default y
++ depends on 8139TOO
++ help
++ This instructs the driver to use programmed I/O ports (PIO) instead
++ of PCI shared memory (MMIO). This can possibly solve some problems
++ in case your mainboard has memory consistency issues. If unsure,
++ say N.
++
++config 8139TOO_TUNE_TWISTER
++ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
++ depends on 8139TOO
++ help
++ This implements a function which might come in handy in case you
++ are using low quality on long cabling. It is required for RealTek
++ RTL-8139 revision K boards, and totally unused otherwise. It tries
++ to match the transceiver to the cable characteristics. This is
++ experimental since hardly documented by the manufacturer.
++ If unsure, say Y.
++
++config 8139TOO_8129
++ bool "Support for older RTL-8129/8130 boards"
++ depends on 8139TOO
++ help
++ This enables support for the older and uncommon RTL-8129 and
++ RTL-8130 chips, which support MII via an external transceiver,
++ instead of an internal one. Disabling this option will save some
++ memory by making the code size smaller. If unsure, say Y.
++
++config 8139_OLD_RX_RESET
++ bool "Use older RX-reset method"
++ depends on 8139TOO
++ help
++ The 8139too driver was recently updated to contain a more rapid
++ reset sequence, in the face of severe receive errors. This "new"
++ RX-reset method should be adequate for all boards. But if you
++ experience problems, you can enable this option to restore the
++ old RX-reset behavior. If unsure, say N.
++
++config SIS900
++ tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ ---help---
++ This is a driver for the Fast Ethernet PCI network cards based on
++ the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
++ SiS 630 and SiS 540 chipsets.
++
++ This driver also supports AMD 79C901 HomePNA so that you can use
++ your phone line as a network cable.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sis900. This is recommended.
++
++config EPIC100
++ tristate "SMC EtherPower II"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
++ which is based on the SMC83c17x (EPIC/100).
++ More specific information and updates are available from
++ <http://www.scyld.com/network/epic100.html>.
++
++config SUNDANCE
++ tristate "Sundance Alta support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ This driver is for the Sundance "Alta" chip.
++ More specific information and updates are available from
++ <http://www.scyld.com/network/sundance.html>.
++
++config SUNDANCE_MMIO
++ bool "Use MMIO instead of PIO"
++ depends on SUNDANCE
++ help
++ Enable memory-mapped I/O for interaction with Sundance NIC registers.
++ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
++ is known to solve bugs on certain chips.
++
++ If unsure, say N.
++
++config TLAN
++ tristate "TI ThunderLAN support"
++ depends on NET_PCI && (PCI || EISA) && !64BIT
++ ---help---
++ If you have a PCI Ethernet network card based on the ThunderLAN chip
++ which is supported by this driver, say Y and read the
++ Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ Devices currently supported by this driver are Compaq Netelligent,
++ Compaq NetFlex and Olicom cards. Please read the file
++ <file:Documentation/networking/tlan.txt> for more details.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called tlan.
++
++ Please email feedback to <torben.mathiasen@compaq.com>.
++
++config VIA_RHINE
++ tristate "VIA Rhine support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select MII
++ help
++ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
++ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
++ Ethernet functions can also be found integrated on South Bridges
++ (e.g. VT8235).
++
++ To compile this driver as a module, choose M here. The module
++ will be called via-rhine.
++
++config VIA_RHINE_MMIO
++ bool "Use MMIO instead of PIO"
++ depends on VIA_RHINE
++ help
++ This instructs the driver to use PCI shared memory (MMIO) instead of
++ programmed I/O ports (PIO). Enabling this gives an improvement in
++ processing time in parts of the driver.
++
++ If unsure, say Y.
++
++config VIA_RHINE_NAPI
++ bool "Use Rx Polling (NAPI)"
++ depends on VIA_RHINE
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++config LAN_SAA9730
++ bool "Philips SAA9730 Ethernet support"
++ depends on NET_PCI && PCI && MIPS_ATLAS
++ help
++ The SAA9730 is a combined multimedia and peripheral controller used
++ in thin clients, Internet access terminals, and diskless
++ workstations.
++ See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
++
++config SC92031
++ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
++ depends on NET_PCI && PCI && EXPERIMENTAL
++ select CRC32
++ ---help---
++ This is a driver for the Fast Ethernet PCI network cards based on
++ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
++ have one of these, say Y here.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sc92031. This is recommended.
++
++config NET_POCKET
++ bool "Pocket and portable adapters"
++ depends on NET_ETHERNET && PARPORT
++ ---help---
++ Cute little network (Ethernet) devices which attach to the parallel
++ port ("pocket adapters"), commonly used with laptops. If you have
++ one of those, say Y and read the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ If you want to plug a network (or some other) card into the PCMCIA
++ (or PC-card) slot of your laptop instead (PCMCIA is the standard for
++ credit card size extension cards used by all modern laptops), you
++ need the pcmcia-cs package (location contained in the file
++ <file:Documentation/Changes>) and you can say N here.
++
++ Laptop users should read the Linux Laptop home page at
++ <http://www.linux-on-laptops.com/> or
++ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
++
++ Note that the answer to this question doesn't directly affect the
++ kernel: saying N will just cause the configurator to skip all
++ the questions about this class of network devices. If you say Y, you
++ will be asked for your specific device in the following questions.
++
++config ATP
++ tristate "AT-LAN-TEC/RealTek pocket adapter support"
++ depends on NET_POCKET && PARPORT && X86
++ select CRC32
++ ---help---
++ This is a network (Ethernet) device which attaches to your parallel
++ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
++ available from <http://www.tldp.org/docs.html#howto>, if you
++ want to use this. If you intend to use this driver, you should have
++ said N to the "Parallel printer support", because the two drivers
++ don't like each other.
++
++ To compile this driver as a module, choose M here: the module
++ will be called atp.
++
++config DE600
++ tristate "D-Link DE600 pocket adapter support"
++ depends on NET_POCKET && PARPORT
++ ---help---
++ This is a network (Ethernet) device which attaches to your parallel
++ port. Read <file:Documentation/networking/DLINK.txt> as well as the
++ Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>, if you want to use
++ this. It is possible to have several devices share a single parallel
++ port and it is safe to compile the corresponding drivers into the
++ kernel.
++
++ To compile this driver as a module, choose M here: the module
++ will be called de600.
++
++config DE620
++ tristate "D-Link DE620 pocket adapter support"
++ depends on NET_POCKET && PARPORT
++ ---help---
++ This is a network (Ethernet) device which attaches to your parallel
++ port. Read <file:Documentation/networking/DLINK.txt> as well as the
++ Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>, if you want to use
++ this. It is possible to have several devices share a single parallel
++ port and it is safe to compile the corresponding drivers into the
++ kernel.
++
++ To compile this driver as a module, choose M here: the module
++ will be called de620.
++
++config SGISEEQ
++ tristate "SGI Seeq ethernet controller support"
++ depends on NET_ETHERNET && SGI_IP22
++ help
++ Say Y here if you have an Seeq based Ethernet network card. This is
++ used in many Silicon Graphics machines.
++
++config DECLANCE
++ tristate "DEC LANCE ethernet controller support"
++ depends on NET_ETHERNET && MACH_DECSTATION
++ select CRC32
++ help
++ This driver is for the series of Ethernet controllers produced by
++ DEC (now Compaq) based on the AMD Lance chipset, including the
++ DEPCA series. (This chipset is better known via the NE2100 cards.)
++
++config 68360_ENET
++ bool "Motorola 68360 ethernet controller"
++ depends on M68360
++ help
++ Say Y here if you want to use the built-in ethernet controller of
++ the Motorola 68360 processor.
++
++config FEC
++ bool "FEC ethernet controller (of ColdFire CPUs)"
++ depends on M523x || M527x || M5272 || M528x || M520x
++ help
++ Say Y here if you want to use the built-in 10/100 Fast ethernet
++ controller on some Motorola ColdFire processors.
++
++config FEC2
++ bool "Second FEC ethernet controller (on some ColdFire CPUs)"
++ depends on FEC
++ help
++ Say Y here if you want to use the second built-in 10/100 Fast
++ ethernet controller on some Motorola ColdFire processors.
++
++config NE_H8300
++ tristate "NE2000 compatible support for H8/300"
++ depends on H8300 && NET_ETHERNET
++ help
++ Say Y here if you want to use the NE2000 compatible
++ controller on the Renesas H8/300 processor.
++
++source "drivers/net/fec_8xx/Kconfig"
++source "drivers/net/fs_enet/Kconfig"
++
++endmenu
++
++#
++# Gigabit Ethernet
++#
++
++menu "Ethernet (1000 Mbit)"
++ depends on !UML
++
++config ACENIC
++ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
++ depends on PCI
++ ---help---
++ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
++ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
++ adapter. The driver allows for using the Jumbo Frame option (9000
++ bytes/frame) however it requires that your switches can handle this
++ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
++ line.
++
++ To compile this driver as a module, choose M here: the
++ module will be called acenic.
++
++config ACENIC_OMIT_TIGON_I
++ bool "Omit support for old Tigon I based AceNICs"
++ depends on ACENIC
++ help
++ Say Y here if you only have Tigon II based AceNICs and want to leave
++ out support for the older Tigon I based cards which are no longer
++ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
++ version)). This will reduce the size of the driver object by
++ app. 100KB. If you are not sure whether your card is a Tigon I or a
++ Tigon II, say N here.
++
++ The safe and default value for this is N.
++
++config DL2K
++ tristate "D-Link DL2000-based Gigabit Ethernet support"
++ depends on PCI
++ select CRC32
++ help
++ This driver supports D-Link 2000-based gigabit ethernet cards, which
++ includes
++ D-Link DGE-550T Gigabit Ethernet Adapter.
++ D-Link DL2000-based Gigabit Ethernet Adapter.
++
++ To compile this driver as a module, choose M here: the
++ module will be called dl2k.
++
++config E1000
++ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
++ depends on PCI
++ ---help---
++ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
++ adapters. For more information on how to identify your adapter, go
++ to the Adapter & Driver ID Guide at:
++
++ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
++
++ For general information and support, go to the Intel support
++ website at:
++
++ <http://support.intel.com>
++
++ More specific information on configuring the driver is in
++ <file:Documentation/networking/e1000.txt>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called e1000.
++
++config E1000_NAPI
++ bool "Use Rx Polling (NAPI)"
++ depends on E1000
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config E1000_DISABLE_PACKET_SPLIT
++ bool "Disable Packet Split for PCI express adapters"
++ depends on E1000
++ help
++ Say Y here if you want to use the legacy receive path for PCI express
++ hardware.
++
++ If in doubt, say N.
++
++source "drivers/net/ixp2000/Kconfig"
++
++config MYRI_SBUS
++ tristate "MyriCOM Gigabit Ethernet support"
++ depends on SBUS
++ help
++ This driver supports MyriCOM Sbus gigabit Ethernet cards.
++
++ To compile this driver as a module, choose M here: the module
++ will be called myri_sbus. This is recommended.
++
++config NS83820
++ tristate "National Semiconductor DP83820 support"
++ depends on PCI
++ help
++ This is a driver for the National Semiconductor DP83820 series
++ of gigabit ethernet MACs. Cards using this chipset include
++ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
++ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
++ zero copy.
++
++config HAMACHI
++ tristate "Packet Engines Hamachi GNIC-II support"
++ depends on PCI
++ select MII
++ help
++ If you have a Gigabit Ethernet card of this type, say Y and read
++ the Ethernet-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called hamachi.
++
++config YELLOWFIN
++ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
++ depends on PCI && EXPERIMENTAL
++ select CRC32
++ ---help---
++ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
++ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
++ used by the Beowulf Linux cluster project. See
++ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
++ information about this driver in particular and Beowulf in general.
++
++ To compile this driver as a module, choose M here: the module
++ will be called yellowfin. This is recommended.
++
++config R8169
++ tristate "Realtek 8169 gigabit ethernet support"
++ depends on PCI
++ select CRC32
++ ---help---
++ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
++
++ To compile this driver as a module, choose M here: the module
++ will be called r8169. This is recommended.
++
++config R8169_NAPI
++ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
++ depends on R8169 && EXPERIMENTAL
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config R8169_VLAN
++ bool "VLAN support"
++ depends on R8169 && VLAN_8021Q
++ ---help---
++ Say Y here for the r8169 driver to support the functions required
++ by the kernel 802.1Q code.
++
++ If in doubt, say Y.
++
++config SIS190
++ tristate "SiS190/SiS191 gigabit ethernet support"
++ depends on PCI
++ select CRC32
++ select MII
++ ---help---
++ Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
++ a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
++ appear in lan on motherboard designs which are based on SiS 965
++ and SiS 966 south bridge.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sis190. This is recommended.
++
++config SKGE
++ tristate "New SysKonnect GigaEthernet support"
++ depends on PCI
++ select CRC32
++ ---help---
++ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
++ and related Gigabit Ethernet adapters. It is a new smaller driver
++ with better performance and more complete ethtool support.
++
++ It does not support the link failover and network management
++ features that "portable" vendor supplied sk98lin driver does.
++
++ This driver supports adapters based on the original Yukon chipset:
++ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
++ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
++
++ It does not support the newer Yukon2 chipset: a separate driver,
++ sky2, is provided for Yukon2-based adapters.
++
++ To compile this driver as a module, choose M here: the module
++ will be called skge. This is recommended.
++
++config SKY2
++ tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
++ depends on PCI
++ select CRC32
++ ---help---
++ This driver supports Gigabit Ethernet adapters based on the
++ Marvell Yukon 2 chipset:
++ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
++ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
++
++ There is companion driver for the older Marvell Yukon and
++ Genesis based adapters: skge.
++
++ To compile this driver as a module, choose M here: the module
++ will be called sky2. This is recommended.
++
++config SK98LIN
++ tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
++ depends on PCI
++ ---help---
++ Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
++ compliant Gigabit Ethernet Adapter.
++
++ This driver supports the original Yukon chipset. This driver is
++ deprecated and will be removed from the kernel in the near future,
++ it has been replaced by the skge driver. skge is cleaner and
++ seems to work better.
++
++ This driver does not support the newer Yukon2 chipset. A separate
++ driver, sky2, is provided to support Yukon2-based adapters.
++
++ The following adapters are supported by this driver:
++ - 3Com 3C940 Gigabit LOM Ethernet Adapter
++ - 3Com 3C941 Gigabit LOM Ethernet Adapter
++ - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
++ - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
++ - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
++ - EG1032 v2 Instant Gigabit Network Adapter
++ - EG1064 v2 Instant Gigabit Network Adapter
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
++ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
++ - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
++ - Marvell RDK-8001 Adapter
++ - Marvell RDK-8002 Adapter
++ - Marvell RDK-8003 Adapter
++ - Marvell RDK-8004 Adapter
++ - Marvell RDK-8006 Adapter
++ - Marvell RDK-8007 Adapter
++ - Marvell RDK-8008 Adapter
++ - Marvell RDK-8009 Adapter
++ - Marvell RDK-8010 Adapter
++ - Marvell RDK-8011 Adapter
++ - Marvell RDK-8012 Adapter
++ - Marvell RDK-8052 Adapter
++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
++ - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
++ - SK-9521 10/100/1000Base-T Adapter
++ - SK-9521 V2.0 10/100/1000Base-T Adapter
++ - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
++ - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
++ - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
++ - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
++ - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
++ - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
++ - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
++ - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
++ - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
++ - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
++ - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
++ - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
++ - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
++ - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
++ - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
++ - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
++ - SMC EZ Card 1000 (SMC9452TXV.2)
++
++ The adapters support Jumbo Frames.
++ The dual link adapters support link-failover and dual port features.
++ Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
++ the scatter-gather functionality with sendfile(). Please refer to
++ <file:Documentation/networking/sk98lin.txt> for more information about
++ optional driver parameters.
++ Questions concerning this driver may be addressed to:
++ <linux@syskonnect.de>
++
++ If you want to compile this driver as a module ( = code which can be
++ inserted in and removed from the running kernel whenever you want),
++ say M here and read <file:Documentation/kbuild/modules.txt>. The module will
++ be called sk98lin. This is recommended.
++
++config VIA_VELOCITY
++ tristate "VIA Velocity support"
++ depends on NET_PCI && PCI
++ select CRC32
++ select CRC_CCITT
++ select MII
++ help
++ If you have a VIA "Velocity" based network card say Y here.
++
++ To compile this driver as a module, choose M here. The module
++ will be called via-velocity.
++
++config TIGON3
++ tristate "Broadcom Tigon3 support"
++ depends on PCI
++ help
++ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
++
++ To compile this driver as a module, choose M here: the module
++ will be called tg3. This is recommended.
++
++config BNX2
++ tristate "Broadcom NetXtremeII support"
++ depends on PCI
++ select CRC32
++ select ZLIB_INFLATE
++ help
++ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
++
++ To compile this driver as a module, choose M here: the module
++ will be called bnx2. This is recommended.
++
++config SPIDER_NET
++ tristate "Spider Gigabit Ethernet driver"
++ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
++ select FW_LOADER
++ help
++ This driver supports the Gigabit Ethernet chips present on the
++ Cell Processor-Based Blades from IBM.
++
++config TSI108_ETH
++ tristate "Tundra TSI108 gigabit Ethernet support"
++ depends on TSI108_BRIDGE
++ help
++ This driver supports Tundra TSI108 gigabit Ethernet ports.
++ To compile this driver as a module, choose M here: the module
++ will be called tsi108_eth.
++
++config GIANFAR
++ tristate "Gianfar Ethernet"
++ depends on 85xx || 83xx || PPC_86xx
++ select PHYLIB
++ select CRC32
++ help
++ This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
++ and MPC86xx family of chips, and the FEC on the 8540.
++
++config GFAR_NAPI
++ bool "NAPI Support"
++ depends on GIANFAR
++
++config UCC_GETH
++ tristate "Freescale QE UCC GETH"
++ depends on QUICC_ENGINE && UCC_FAST
++ help
++ This driver supports the Gigabit Ethernet mode of QE UCC.
++ QE can be found on MPC836x CPUs.
++
++config UGETH_NAPI
++ bool "NAPI Support"
++ depends on UCC_GETH
++
++config UGETH_MAGIC_PACKET
++ bool "Magic Packet detection support"
++ depends on UCC_GETH
++
++config UGETH_FILTERING
++ bool "Mac address filtering support"
++ depends on UCC_GETH
++
++config UGETH_TX_ON_DEMOND
++ bool "Transmit on Demond support"
++ depends on UCC_GETH
++
++config UGETH_HAS_GIGA
++ bool
++ depends on UCC_GETH && PPC_MPC836x
++
++config MV643XX_ETH
++ tristate "MV-643XX Ethernet support"
++ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
++ select MII
++ help
++ This driver supports the gigabit Ethernet on the Marvell MV643XX
++ chipset which is used in the Momenco Ocelot C and Jaguar ATX and
++ Pegasos II, amongst other PPC and MIPS boards.
++
++config QLA3XXX
++ tristate "QLogic QLA3XXX Network Driver Support"
++ depends on PCI
++ help
++ This driver supports QLogic ISP3XXX gigabit Ethernet cards.
++
++ To compile this driver as a module, choose M here: the module
++ will be called qla3xxx.
++
++config ATL1
++ tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
++ depends on PCI && EXPERIMENTAL
++ select CRC32
++ select MII
++ help
++ This driver supports the Attansic L1 gigabit ethernet adapter.
++
++ To compile this driver as a module, choose M here. The module
++ will be called atl1.
++
++endmenu
++
++#
++# 10 Gigabit Ethernet
++#
++
++menu "Ethernet (10000 Mbit)"
++ depends on !UML
++
++config CHELSIO_T1
++ tristate "Chelsio 10Gb Ethernet support"
++ depends on PCI
++ select CRC32
++ help
++ This driver supports Chelsio gigabit and 10-gigabit
++ Ethernet cards. More information about adapter features and
++ performance tuning is in <file:Documentation/networking/cxgb.txt>.
++
++ For general information about Chelsio and our products, visit
++ our website at <http://www.chelsio.com>.
++
++ For customer support, please visit our customer support page at
++ <http://www.chelsio.com/support.htm>.
++
++ Please send feedback to <linux-bugs@chelsio.com>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called cxgb.
++
++config CHELSIO_T1_1G
++ bool "Chelsio gigabit Ethernet support"
++ depends on CHELSIO_T1
++ help
++ Enables support for Chelsio's gigabit Ethernet PCI cards. If you
++ are using only 10G cards say 'N' here.
++
++config CHELSIO_T1_NAPI
++ bool "Use Rx Polling (NAPI)"
++ depends on CHELSIO_T1
++ default y
++ help
++ NAPI is a driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card.
++
++config CHELSIO_T3
++ tristate "Chelsio Communications T3 10Gb Ethernet support"
++ depends on PCI
++ select FW_LOADER
++ help
++ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
++ adapters.
++
++ For general information about Chelsio and our products, visit
++ our website at <http://www.chelsio.com>.
++
++ For customer support, please visit our customer support page at
++ <http://www.chelsio.com/support.htm>.
++
++ Please send feedback to <linux-bugs@chelsio.com>.
++
++ To compile this driver as a module, choose M here: the module
++ will be called cxgb3.
++
++config EHEA
++ tristate "eHEA Ethernet support"
++ depends on IBMEBUS
++ ---help---
++ This driver supports the IBM pSeries eHEA ethernet adapter.
++
++ To compile the driver as a module, choose M here. The module
++ will be called ehea.
++
++config IXGB
++ tristate "Intel(R) PRO/10GbE support"
++ depends on PCI
++ ---help---
++ This driver supports Intel(R) PRO/10GbE family of
++ adapters. For more information on how to identify your adapter, go
++ to the Adapter & Driver ID Guide at:
++
++ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
++
++ For general information and support, go to the Intel support
++ website at:
++
++ <http://support.intel.com>
++
++ More specific information on configuring the driver is in
++ <file:Documentation/networking/ixgb.txt>.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called ixgb.
++
++config IXGB_NAPI
++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
++ depends on IXGB && EXPERIMENTAL
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config S2IO
++ tristate "S2IO 10Gbe XFrame NIC"
++ depends on PCI
++ ---help---
++ This driver supports the 10Gbe XFrame NIC of S2IO.
++ More specific information on configuring the driver is in
++ <file:Documentation/networking/s2io.txt>.
++
++config S2IO_NAPI
++ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
++ depends on S2IO && EXPERIMENTAL
++ help
++ NAPI is a new driver API designed to reduce CPU and interrupt load
++ when the driver is receiving lots of packets from the card. It is
++ still somewhat experimental and thus not yet enabled by default.
++
++ If your estimated Rx load is 10kpps or more, or if the card will be
++ deployed on potentially unfriendly networks (e.g. in a firewall),
++ then say Y here.
++
++ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
++ information.
++
++ If in doubt, say N.
++
++config MYRI10GE
++ tristate "Myricom Myri-10G Ethernet support"
++ depends on PCI
++ select FW_LOADER
++ select CRC32
++ ---help---
++ This driver supports Myricom Myri-10G Dual Protocol interface in
++ Ethernet mode. If the eeprom on your board is not recent enough,
++ you will need a newer firmware image.
++ You may get this image or more information, at:
++
++ <http://www.myri.com/scs/download-Myri10GE.html>
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module
++ will be called myri10ge.
++
++config NETXEN_NIC
++ tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
++ depends on PCI
++ help
++ This enables the support for NetXen's Gigabit Ethernet card.
++
++config PASEMI_MAC
++ tristate "PA Semi 1/10Gbit MAC"
++ depends on PPC64 && PCI
++ help
++ This driver supports the on-chip 1/10Gbit Ethernet controller on
++ PA Semi's PWRficient line of chips.
++
++endmenu
++
++source "drivers/net/tokenring/Kconfig"
++
++source "drivers/net/wireless/Kconfig"
++
++source "drivers/net/pcmcia/Kconfig"
++
++source "drivers/net/wan/Kconfig"
++
++source "drivers/atm/Kconfig"
++
++source "drivers/s390/net/Kconfig"
++
++config ISERIES_VETH
++ tristate "iSeries Virtual Ethernet driver support"
++ depends on PPC_ISERIES
++
++config RIONET
++ tristate "RapidIO Ethernet over messaging driver support"
++ depends on RAPIDIO
++
++config RIONET_TX_SIZE
++ int "Number of outbound queue entries"
++ depends on RIONET
++ default "128"
++
++config RIONET_RX_SIZE
++ int "Number of inbound queue entries"
++ depends on RIONET
++ default "128"
++
++config FDDI
++ bool "FDDI driver support"
++ depends on (PCI || EISA || TC)
++ help
++ Fiber Distributed Data Interface is a high speed local area network
++ design; essentially a replacement for high speed Ethernet. FDDI can
++ run over copper or fiber. If you are connected to such a network and
++ want a driver for the FDDI card in your computer, say Y here (and
++ then also Y to the driver for your FDDI card, below). Most people
++ will say N.
++
++config DEFXX
++ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
++ depends on FDDI && (PCI || EISA || TC)
++ ---help---
++ This is support for the DIGITAL series of TURBOchannel (DEFTA),
++ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
++ to a local FDDI network.
++
++ To compile this driver as a module, choose M here: the module
++ will be called defxx. If unsure, say N.
++
++config DEFXX_MMIO
++ bool
++ prompt "Use MMIO instead of PIO" if PCI || EISA
++ depends on DEFXX
++ default n if PCI || EISA
++ default y
++ ---help---
++ This instructs the driver to use EISA or PCI memory-mapped I/O
++ (MMIO) as appropriate instead of programmed I/O ports (PIO).
++ Enabling this gives an improvement in processing time in parts
++ of the driver, but it may cause problems with EISA (DEFEA)
++ adapters. TURBOchannel does not have the concept of I/O ports,
++ so MMIO is always used for these (DEFTA) adapters.
++
++ If unsure, say N.
++
++config SKFP
++ tristate "SysKonnect FDDI PCI support"
++ depends on FDDI && PCI
++ select BITREVERSE
++ ---help---
++ Say Y here if you have a SysKonnect FDDI PCI adapter.
++ The following adapters are supported by this driver:
++ - SK-5521 (SK-NET FDDI-UP)
++ - SK-5522 (SK-NET FDDI-UP DAS)
++ - SK-5541 (SK-NET FDDI-FP)
++ - SK-5543 (SK-NET FDDI-LP)
++ - SK-5544 (SK-NET FDDI-LP DAS)
++ - SK-5821 (SK-NET FDDI-UP64)
++ - SK-5822 (SK-NET FDDI-UP64 DAS)
++ - SK-5841 (SK-NET FDDI-FP64)
++ - SK-5843 (SK-NET FDDI-LP64)
++ - SK-5844 (SK-NET FDDI-LP64 DAS)
++ - Netelligent 100 FDDI DAS Fibre SC
++ - Netelligent 100 FDDI SAS Fibre SC
++ - Netelligent 100 FDDI DAS UTP
++ - Netelligent 100 FDDI SAS UTP
++ - Netelligent 100 FDDI SAS Fibre MIC
++
++ Read <file:Documentation/networking/skfp.txt> for information about
++ the driver.
++
++ Questions concerning this driver can be addressed to:
++ <linux@syskonnect.de>
++
++ To compile this driver as a module, choose M here: the module
++ will be called skfp. This is recommended.
++
++config HIPPI
++ bool "HIPPI driver support (EXPERIMENTAL)"
++ depends on EXPERIMENTAL && INET && PCI
++ help
++ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
++ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
++ can run over copper (25m) or fiber (300m on multi-mode or 10km on
++ single-mode). HIPPI networks are commonly used for clusters and to
++ connect to super computers. If you are connected to a HIPPI network
++ and have a HIPPI network card in your computer that you want to use
++ under Linux, say Y here (you must also remember to enable the driver
++ for your HIPPI card below). Most people will say N here.
++
++config ROADRUNNER
++ tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
++ depends on HIPPI && PCI
++ help
++ Say Y here if this is your PCI HIPPI network card.
++
++ To compile this driver as a module, choose M here: the module
++ will be called rrunner. If unsure, say N.
++
++config ROADRUNNER_LARGE_RINGS
++ bool "Use large TX/RX rings (EXPERIMENTAL)"
++ depends on ROADRUNNER
++ help
++ If you say Y here, the RoadRunner driver will preallocate up to 2 MB
++ of additional memory to allow for fastest operation, both for
++ transmitting and receiving. This memory cannot be used by any other
++ kernel code or by user space programs. Say Y here only if you have
++ the memory.
++
++config PLIP
++ tristate "PLIP (parallel port) support"
++ depends on PARPORT
++ ---help---
++ PLIP (Parallel Line Internet Protocol) is used to create a
++ reasonably fast mini network consisting of two (or, rarely, more)
++ local machines. A PLIP link from a Linux box is a popular means to
++ install a Linux distribution on a machine which doesn't have a
++ CD-ROM drive (a minimal system has to be transferred with floppies
++ first). The kernels on both machines need to have this PLIP option
++ enabled for this to work.
++
++ The PLIP driver has two modes, mode 0 and mode 1. The parallel
++ ports (the connectors at the computers with 25 holes) are connected
++ with "null printer" or "Turbo Laplink" cables which can transmit 4
++ bits at a time (mode 0) or with special PLIP cables, to be used on
++ bidirectional parallel ports only, which can transmit 8 bits at a
++ time (mode 1); you can find the wiring of these cables in
++ <file:Documentation/networking/PLIP.txt>. The cables can be up to
++ 15m long. Mode 0 works also if one of the machines runs DOS/Windows
++ and has some PLIP software installed, e.g. the Crynwr PLIP packet
++ driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
++ and winsock or NCSA's telnet.
++
++ If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
++ as the NET-3-HOWTO, both available from
++ <http://www.tldp.org/docs.html#howto>. Note that the PLIP
++ protocol has been changed and this PLIP driver won't work together
++ with the PLIP support in Linux versions 1.0.x. This option enlarges
++ your kernel by about 8 KB.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called plip. If unsure, say Y or M, in case you buy a laptop
++ later.
++
++config PPP
++ tristate "PPP (point-to-point protocol) support"
++ select SLHC
++ ---help---
++ PPP (Point to Point Protocol) is a newer and better SLIP. It serves
++ the same purpose: sending Internet traffic over telephone (and other
++ serial) lines. Ask your access provider if they support it, because
++ otherwise you can't use it; most Internet access providers these
++ days support PPP rather than SLIP.
++
++ To use PPP, you need an additional program called pppd as described
++ in the PPP-HOWTO, available at
++ <http://www.tldp.org/docs.html#howto>. Make sure that you have
++ the version of pppd recommended in <file:Documentation/Changes>.
++ The PPP option enlarges your kernel by about 16 KB.
++
++ There are actually two versions of PPP: the traditional PPP for
++ asynchronous lines, such as regular analog phone lines, and
++ synchronous PPP which can be used over digital ISDN lines for
++ example. If you want to use PPP over phone lines or other
++ asynchronous serial lines, you need to say Y (or M) here and also to
++ the next option, "PPP support for async serial ports". For PPP over
++ synchronous lines, you should say Y (or M) here and to "Support
++ synchronous PPP", below.
++
++ If you said Y to "Version information on all symbols" above, then
++ you cannot compile the PPP driver into the kernel; you can then only
++ compile it as a module. To compile this driver as a module, choose M
++ here and read <file:Documentation/networking/net-modules.txt>.
++ The module will be called ppp_generic.
++
++config PPP_MULTILINK
++ bool "PPP multilink support (EXPERIMENTAL)"
++ depends on PPP && EXPERIMENTAL
++ help
++ PPP multilink is a protocol (defined in RFC 1990) which allows you
++ to combine several (logical or physical) lines into one logical PPP
++ connection, so that you can utilize your full bandwidth.
++
++ This has to be supported at the other end as well and you need a
++ version of the pppd daemon which understands the multilink protocol.
++
++ If unsure, say N.
++
++config PPP_FILTER
++ bool "PPP filtering"
++ depends on PPP
++ help
++ Say Y here if you want to be able to filter the packets passing over
++ PPP interfaces. This allows you to control which packets count as
++ activity (i.e. which packets will reset the idle timer or bring up
++ a demand-dialed link) and which packets are to be dropped entirely.
++ You need to say Y here if you wish to use the pass-filter and
++ active-filter options to pppd.
++
++ If unsure, say N.
++
++config PPP_ASYNC
++ tristate "PPP support for async serial ports"
++ depends on PPP
++ select CRC_CCITT
++ ---help---
++ Say Y (or M) here if you want to be able to use PPP over standard
++ asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
++ a modem (not a synchronous or ISDN modem) to contact your ISP, you
++ need this option.
++
++ To compile this driver as a module, choose M here.
++
++ If unsure, say Y.
++
++config PPP_SYNC_TTY
++ tristate "PPP support for sync tty ports"
++ depends on PPP
++ help
++ Say Y (or M) here if you want to be able to use PPP over synchronous
++ (HDLC) tty devices, such as the SyncLink adapter. These devices
++ are often used for high-speed leased lines like T1/E1.
++
++ To compile this driver as a module, choose M here.
++
++config PPP_DEFLATE
++ tristate "PPP Deflate compression"
++ depends on PPP
++ select ZLIB_INFLATE
++ select ZLIB_DEFLATE
++ ---help---
++ Support for the Deflate compression method for PPP, which uses the
++ Deflate algorithm (the same algorithm that gzip uses) to compress
++ each PPP packet before it is sent over the wire. The machine at the
++ other end of the PPP link (usually your ISP) has to support the
++ Deflate compression method as well for this to be useful. Even if
++ they don't support it, it is safe to say Y here.
++
++ To compile this driver as a module, choose M here.
++
++config PPP_BSDCOMP
++ tristate "PPP BSD-Compress compression"
++ depends on PPP
++ ---help---
++ Support for the BSD-Compress compression method for PPP, which uses
++ the LZW compression method to compress each PPP packet before it is
++ sent over the wire. The machine at the other end of the PPP link
++ (usually your ISP) has to support the BSD-Compress compression
++ method as well for this to be useful. Even if they don't support it,
++ it is safe to say Y here.
++
++ The PPP Deflate compression method ("PPP Deflate compression",
++ above) is preferable to BSD-Compress, because it compresses better
++ and is patent-free.
++
++ Note that the BSD compression code will always be compiled as a
++ module; it is called bsd_comp and will show up in the directory
++ modules once you have said "make modules". If unsure, say N.
++
++config PPP_MPPE
++ tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
++ depends on PPP && EXPERIMENTAL
++ select CRYPTO
++ select CRYPTO_SHA1
++ select CRYPTO_ARC4
++ select CRYPTO_ECB
++ ---help---
++ Support for the MPPE Encryption protocol, as employed by the
++ Microsoft Point-to-Point Tunneling Protocol.
++
++ See http://pptpclient.sourceforge.net/ for information on
++ configuring PPTP clients and servers to utilize this method.
++
++config PPPOE
++ tristate "PPP over Ethernet (EXPERIMENTAL)"
++ depends on EXPERIMENTAL && PPP
++ help
++ Support for PPP over Ethernet.
++
++ This driver requires the latest version of pppd from the CVS
++ repository at cvs.samba.org. Alternatively, see the
++ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
++ which contains instruction on how to use this driver (under
++ the heading "Kernel mode PPPoE").
++
++config PPPOATM
++ tristate "PPP over ATM"
++ depends on ATM && PPP
++ help
++ Support PPP (Point to Point Protocol) encapsulated in ATM frames.
++ This implementation does not yet comply with section 8 of RFC2364,
++ which can lead to bad results if the ATM peer loses state and
++ changes its encapsulation unilaterally.
++
++config SLIP
++ tristate "SLIP (serial line) support"
++ ---help---
++ Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
++ connect to your Internet service provider or to connect to some
++ other local Unix box or if you want to configure your Linux box as a
++ Slip/CSlip server for other people to dial in. SLIP (Serial Line
++ Internet Protocol) is a protocol used to send Internet traffic over
++ serial connections such as telephone lines or null modem cables;
++ nowadays, the protocol PPP is more commonly used for this same
++ purpose.
++
++ Normally, your access provider has to support SLIP in order for you
++ to be able to use it, but there is now a SLIP emulator called SLiRP
++ around (available from
++ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
++ allows you to use SLIP over a regular dial up shell connection. If
++ you plan to use SLiRP, make sure to say Y to CSLIP, below. The
++ NET-3-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>, explains how to
++ configure SLIP. Note that you don't need this option if you just
++ want to run term (term is a program which gives you almost full
++ Internet connectivity if you have a regular dial up shell account on
++ some Internet connected Unix computer. Read
++ <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
++ support will enlarge your kernel by about 4 KB. If unsure, say N.
++
++ To compile this driver as a module, choose M here and read
++ <file:Documentation/networking/net-modules.txt>. The module will be
++ called slip.
++
++config SLIP_COMPRESSED
++ bool "CSLIP compressed headers"
++ depends on SLIP
++ select SLHC
++ ---help---
++ This protocol is faster than SLIP because it uses compression on the
++ TCP/IP headers (not on the data itself), but it has to be supported
++ on both ends. Ask your access provider if you are not sure and
++ answer Y, just in case. You will still be able to use plain SLIP. If
++ you plan to use SLiRP, the SLIP emulator (available from
++ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
++ allows you to use SLIP over a regular dial up shell connection, you
++ definitely want to say Y here. The NET-3-HOWTO, available from
++ <http://www.tldp.org/docs.html#howto>, explains how to configure
++ CSLIP. This won't enlarge your kernel.
++
++config SLHC
++ tristate
++ help
++ This option enables Van Jacobsen serial line header compression
++ routines.
++
++config SLIP_SMART
++ bool "Keepalive and linefill"
++ depends on SLIP
++ help
++ Adds additional capabilities to the SLIP driver to support the
++ RELCOM line fill and keepalive monitoring. Ideal on poor quality
++ analogue lines.
++
++config SLIP_MODE_SLIP6
++ bool "Six bit SLIP encapsulation"
++ depends on SLIP
++ help
++ Just occasionally you may need to run IP over hostile serial
++ networks that don't pass all control characters or are only seven
++ bit. Saying Y here adds an extra mode you can use with SLIP:
++ "slip6". In this mode, SLIP will only send normal ASCII symbols over
++ the serial device. Naturally, this has to be supported at the other
++ end of the link as well. It's good enough, for example, to run IP
++ over the async ports of a Camtec JNT Pad. If unsure, say N.
++
++config NET_FC
++ bool "Fibre Channel driver support"
++ depends on SCSI && PCI
++ help
++ Fibre Channel is a high speed serial protocol mainly used to connect
++ large storage devices to the computer; it is compatible with and
++ intended to replace SCSI.
++
++ If you intend to use Fibre Channel, you need to have a Fibre channel
++ adaptor card in your computer; say Y here and to the driver for your
++ adaptor below. You also should have said Y to "SCSI support" and
++ "SCSI generic support".
++
++config SHAPER
++ tristate "Traffic Shaper (OBSOLETE)"
++ depends on EXPERIMENTAL
++ ---help---
++ The traffic shaper is a virtual network device that allows you to
++ limit the rate of outgoing data flow over some other network device.
++ The traffic that you want to slow down can then be routed through
++ these virtual devices. See
++ <file:Documentation/networking/shaper.txt> for more information.
++
++ An alternative to this traffic shaper are traffic schedulers which
++ you'll get if you say Y to "QoS and/or fair queuing" in
++ "Networking options".
++
++ To compile this driver as a module, choose M here: the module
++ will be called shaper. If unsure, say N.
++
++config NETCONSOLE
++ tristate "Network console logging support (EXPERIMENTAL)"
++ depends on EXPERIMENTAL
++ ---help---
++ If you want to log kernel messages over the network, enable this.
++ See <file:Documentation/networking/netconsole.txt> for details.
++
++endif #NETDEVICES
++
++config NETPOLL
++ def_bool NETCONSOLE
++
++config NETPOLL_RX
++ bool "Netpoll support for trapping incoming packets"
++ default n
++ depends on NETPOLL
++
++config NETPOLL_TRAP
++ bool "Netpoll traffic trapping"
++ default n
++ depends on NETPOLL
++
++config NET_POLL_CONTROLLER
++ def_bool NETPOLL
++
++endmenu
+diff -Nur linux-2.6.21.1/drivers/net/Makefile linux-2.6.21.1-owrt/drivers/net/Makefile
+--- linux-2.6.21.1/drivers/net/Makefile 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/net/Makefile 2007-05-23 23:37:01.000000000 +0200
+@@ -11,6 +11,7 @@
+ obj-$(CONFIG_BONDING) += bonding/
+ obj-$(CONFIG_ATL1) += atl1/
+ obj-$(CONFIG_GIANFAR) += gianfar_driver.o
++obj-$(CONFIG_AR2313) += ar2313/
- obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
+ gianfar_driver-objs := gianfar.o \
+ gianfar_ethtool.o \
+@@ -38,6 +39,7 @@
+ obj-$(CONFIG_MACE) += mace.o
+ obj-$(CONFIG_BMAC) += bmac.o
+obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_TYPHOON) += typhoon.o
-diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natsemi.c
---- linux-2.6.17/drivers/net/natsemi.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/natsemi.c 2006-06-18 12:44:28.000000000 +0200
-@@ -771,6 +771,49 @@
+diff -Nur linux-2.6.21.1/drivers/net/Makefile.orig linux-2.6.21.1-owrt/drivers/net/Makefile.orig
+--- linux-2.6.21.1/drivers/net/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/net/Makefile.orig 2007-05-23 23:34:01.000000000 +0200
+@@ -0,0 +1,221 @@
++#
++# Makefile for the Linux network (ethercard) device drivers.
++#
++
++obj-$(CONFIG_E1000) += e1000/
++obj-$(CONFIG_IBM_EMAC) += ibm_emac/
++obj-$(CONFIG_IXGB) += ixgb/
++obj-$(CONFIG_CHELSIO_T1) += chelsio/
++obj-$(CONFIG_CHELSIO_T3) += cxgb3/
++obj-$(CONFIG_EHEA) += ehea/
++obj-$(CONFIG_BONDING) += bonding/
++obj-$(CONFIG_ATL1) += atl1/
++obj-$(CONFIG_GIANFAR) += gianfar_driver.o
++
++gianfar_driver-objs := gianfar.o \
++ gianfar_ethtool.o \
++ gianfar_mii.o \
++ gianfar_sysfs.o
++
++obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
++ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
++
++#
++# link order important here
++#
++obj-$(CONFIG_PLIP) += plip.o
++
++obj-$(CONFIG_ROADRUNNER) += rrunner.o
++
++obj-$(CONFIG_HAPPYMEAL) += sunhme.o
++obj-$(CONFIG_SUNLANCE) += sunlance.o
++obj-$(CONFIG_SUNQE) += sunqe.o
++obj-$(CONFIG_SUNBMAC) += sunbmac.o
++obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
++obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
++obj-$(CONFIG_CASSINI) += cassini.o
++
++obj-$(CONFIG_MACE) += mace.o
++obj-$(CONFIG_BMAC) += bmac.o
++
++obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
++obj-$(CONFIG_DGRS) += dgrs.o
++obj-$(CONFIG_VORTEX) += 3c59x.o
++obj-$(CONFIG_TYPHOON) += typhoon.o
++obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
++obj-$(CONFIG_PCNET32) += pcnet32.o
++obj-$(CONFIG_EEPRO100) += eepro100.o
++obj-$(CONFIG_E100) += e100.o
++obj-$(CONFIG_TLAN) += tlan.o
++obj-$(CONFIG_EPIC100) += epic100.o
++obj-$(CONFIG_SIS190) += sis190.o
++obj-$(CONFIG_SIS900) += sis900.o
++obj-$(CONFIG_YELLOWFIN) += yellowfin.o
++obj-$(CONFIG_ACENIC) += acenic.o
++obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
++obj-$(CONFIG_NATSEMI) += natsemi.o
++obj-$(CONFIG_NS83820) += ns83820.o
++obj-$(CONFIG_STNIC) += stnic.o 8390.o
++obj-$(CONFIG_FEALNX) += fealnx.o
++obj-$(CONFIG_TIGON3) += tg3.o
++obj-$(CONFIG_BNX2) += bnx2.o
++spidernet-y += spider_net.o spider_net_ethtool.o
++obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
++obj-$(CONFIG_TC35815) += tc35815.o
++obj-$(CONFIG_SKGE) += skge.o
++obj-$(CONFIG_SKY2) += sky2.o
++obj-$(CONFIG_SK98LIN) += sk98lin/
++obj-$(CONFIG_SKFP) += skfp/
++obj-$(CONFIG_VIA_RHINE) += via-rhine.o
++obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
++obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
++obj-$(CONFIG_RIONET) += rionet.o
++
++#
++# end link order section
++#
++
++obj-$(CONFIG_MII) += mii.o
++obj-$(CONFIG_PHYLIB) += phy/
++
++obj-$(CONFIG_SUNDANCE) += sundance.o
++obj-$(CONFIG_HAMACHI) += hamachi.o
++obj-$(CONFIG_NET) += Space.o loopback.o
++obj-$(CONFIG_SEEQ8005) += seeq8005.o
++obj-$(CONFIG_NET_SB1000) += sb1000.o
++obj-$(CONFIG_MAC8390) += mac8390.o
++obj-$(CONFIG_APNE) += apne.o 8390.o
++obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
++obj-$(CONFIG_SHAPER) += shaper.o
++obj-$(CONFIG_HP100) += hp100.o
++obj-$(CONFIG_SMC9194) += smc9194.o
++obj-$(CONFIG_FEC) += fec.o
++obj-$(CONFIG_68360_ENET) += 68360enet.o
++obj-$(CONFIG_WD80x3) += wd.o 8390.o
++obj-$(CONFIG_EL2) += 3c503.o 8390.o
++obj-$(CONFIG_NE2000) += ne.o 8390.o
++obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
++obj-$(CONFIG_HPLAN) += hp.o 8390.o
++obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
++obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
++obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
++obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
++obj-$(CONFIG_E2100) += e2100.o 8390.o
++obj-$(CONFIG_ES3210) += es3210.o 8390.o
++obj-$(CONFIG_LNE390) += lne390.o 8390.o
++obj-$(CONFIG_NE3210) += ne3210.o 8390.o
++obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
++obj-$(CONFIG_B44) += b44.o
++obj-$(CONFIG_FORCEDETH) += forcedeth.o
++obj-$(CONFIG_NE_H8300) += ne-h8300.o
++
++obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
++obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
++obj-$(CONFIG_QLA3XXX) += qla3xxx.o
++
++obj-$(CONFIG_PPP) += ppp_generic.o
++obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
++obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
++obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
++obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
++obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
++obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
++
++obj-$(CONFIG_SLIP) += slip.o
++obj-$(CONFIG_SLHC) += slhc.o
++
++obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IFB) += ifb.o
++obj-$(CONFIG_DE600) += de600.o
++obj-$(CONFIG_DE620) += de620.o
++obj-$(CONFIG_LANCE) += lance.o
++obj-$(CONFIG_SUN3_82586) += sun3_82586.o
++obj-$(CONFIG_SUN3LANCE) += sun3lance.o
++obj-$(CONFIG_DEFXX) += defxx.o
++obj-$(CONFIG_SGISEEQ) += sgiseeq.o
++obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
++obj-$(CONFIG_AT1700) += at1700.o
++obj-$(CONFIG_EL1) += 3c501.o
++obj-$(CONFIG_EL16) += 3c507.o
++obj-$(CONFIG_ELMC) += 3c523.o
++obj-$(CONFIG_IBMLANA) += ibmlana.o
++obj-$(CONFIG_ELMC_II) += 3c527.o
++obj-$(CONFIG_EL3) += 3c509.o
++obj-$(CONFIG_3C515) += 3c515.o
++obj-$(CONFIG_EEXPRESS) += eexpress.o
++obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
++obj-$(CONFIG_8139CP) += 8139cp.o
++obj-$(CONFIG_8139TOO) += 8139too.o
++obj-$(CONFIG_ZNET) += znet.o
++obj-$(CONFIG_LAN_SAA9730) += saa9730.o
++obj-$(CONFIG_DEPCA) += depca.o
++obj-$(CONFIG_EWRK3) += ewrk3.o
++obj-$(CONFIG_ATP) += atp.o
++obj-$(CONFIG_NI5010) += ni5010.o
++obj-$(CONFIG_NI52) += ni52.o
++obj-$(CONFIG_NI65) += ni65.o
++obj-$(CONFIG_ELPLUS) += 3c505.o
++obj-$(CONFIG_AC3200) += ac3200.o 8390.o
++obj-$(CONFIG_APRICOT) += 82596.o
++obj-$(CONFIG_LASI_82596) += lasi_82596.o
++obj-$(CONFIG_MVME16x_NET) += 82596.o
++obj-$(CONFIG_BVME6000_NET) += 82596.o
++obj-$(CONFIG_SC92031) += sc92031.o
++
++# This is also a 82596 and should probably be merged
++obj-$(CONFIG_LP486E) += lp486e.o
++
++obj-$(CONFIG_ETH16I) += eth16i.o
++obj-$(CONFIG_ZORRO8390) += zorro8390.o
++obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
++obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
++obj-$(CONFIG_EQUALIZER) += eql.o
++obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
++obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
++obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
++obj-$(CONFIG_DECLANCE) += declance.o
++obj-$(CONFIG_ATARILANCE) += atarilance.o
++obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
++obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
++obj-$(CONFIG_A2065) += a2065.o
++obj-$(CONFIG_HYDRA) += hydra.o
++obj-$(CONFIG_ARIADNE) += ariadne.o
++obj-$(CONFIG_CS89x0) += cs89x0.o
++obj-$(CONFIG_MACSONIC) += macsonic.o
++obj-$(CONFIG_MACMACE) += macmace.o
++obj-$(CONFIG_MAC89x0) += mac89x0.o
++obj-$(CONFIG_TUN) += tun.o
++obj-$(CONFIG_NET_NETX) += netx-eth.o
++obj-$(CONFIG_DL2K) += dl2k.o
++obj-$(CONFIG_R8169) += r8169.o
++obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
++obj-$(CONFIG_IBMVETH) += ibmveth.o
++obj-$(CONFIG_S2IO) += s2io.o
++obj-$(CONFIG_MYRI10GE) += myri10ge/
++obj-$(CONFIG_SMC91X) += smc91x.o
++obj-$(CONFIG_SMC911X) += smc911x.o
++obj-$(CONFIG_DM9000) += dm9000.o
++obj-$(CONFIG_FEC_8XX) += fec_8xx/
++obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
++
++obj-$(CONFIG_MACB) += macb.o
++
++obj-$(CONFIG_ARM) += arm/
++obj-$(CONFIG_DEV_APPLETALK) += appletalk/
++obj-$(CONFIG_TR) += tokenring/
++obj-$(CONFIG_WAN) += wan/
++obj-$(CONFIG_ARCNET) += arcnet/
++obj-$(CONFIG_NET_PCMCIA) += pcmcia/
++obj-$(CONFIG_NET_RADIO) += wireless/
++obj-$(CONFIG_NET_TULIP) += tulip/
++obj-$(CONFIG_HAMRADIO) += hamradio/
++obj-$(CONFIG_IRDA) += irda/
++obj-$(CONFIG_ETRAX_ETHERNET) += cris/
++obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
++
++obj-$(CONFIG_NETCONSOLE) += netconsole.o
++
++obj-$(CONFIG_FS_ENET) += fs_enet/
++
++obj-$(CONFIG_NETXEN_NIC) += netxen/
+diff -Nur linux-2.6.21.1/drivers/net/natsemi.c linux-2.6.21.1-owrt/drivers/net/natsemi.c
+--- linux-2.6.21.1/drivers/net/natsemi.c 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/net/natsemi.c 2007-05-23 23:34:01.000000000 +0200
+@@ -656,6 +656,49 @@
static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
- static struct ethtool_ops ethtool_ops;
+ static const struct ethtool_ops ethtool_ops;
+#ifdef CONFIG_MACH_ARUBA
+
@@ -118,7 +3960,7 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse
static inline void __iomem *ns_ioaddr(struct net_device *dev)
{
return (void __iomem *) dev->base_addr;
-@@ -871,6 +914,7 @@
+@@ -794,6 +837,7 @@
goto err_ioremap;
}
@@ -126,7 +3968,7 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse
/* Work around the dropped serial bit. */
prev_eedata = eeprom_read(ioaddr, 6);
for (i = 0; i < 3; i++) {
-@@ -879,6 +923,19 @@
+@@ -802,6 +846,19 @@
dev->dev_addr[i*2+1] = eedata >> 7;
prev_eedata = eedata;
}
@@ -146,12 +3988,4877 @@ diff -Nur linux-2.6.17/drivers/net/natsemi.c linux-2.6.17-owrt/drivers/net/natse
dev->base_addr = (unsigned long __force) ioaddr;
dev->irq = irq;
-diff -Nur linux-2.6.17/include/asm-mips/bootinfo.h linux-2.6.17-owrt/include/asm-mips/bootinfo.h
---- linux-2.6.17/include/asm-mips/bootinfo.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-mips/bootinfo.h 2006-06-18 12:44:28.000000000 +0200
-@@ -218,6 +218,17 @@
- #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
- #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+diff -Nur linux-2.6.21.1/drivers/pci/access.c linux-2.6.21.1-owrt/drivers/pci/access.c
+--- linux-2.6.21.1/drivers/pci/access.c 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/pci/access.c 2007-05-23 23:36:48.000000000 +0200
+@@ -23,6 +23,7 @@
+ #define PCI_word_BAD (pos & 1)
+ #define PCI_dword_BAD (pos & 3)
+
++#ifdef __MIPSEB__
+ #define PCI_OP_READ(size,type,len) \
+ int pci_bus_read_config_##size \
+ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
+@@ -33,11 +34,32 @@
+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ spin_lock_irqsave(&pci_lock, flags); \
+ res = bus->ops->read(bus, devfn, pos, len, &data); \
++ if (len == 1) \
++ *value = (type)((data >> 24) & 0xff); \
++ else if (len == 2) \
++ *value = (type)((data >> 16) & 0xffff); \
++ else \
+ *value = (type)data; \
+ spin_unlock_irqrestore(&pci_lock, flags); \
+ return res; \
+ }
++#else
+
++#define PCI_OP_READ(size,type,len) \
++int pci_bus_read_config_##size \
++ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
++{ \
++ int res; \
++ unsigned long flags; \
++ u32 data = 0; \
++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
++ spin_lock_irqsave(&pci_lock, flags); \
++ res = bus->ops->read(bus, devfn, pos, len, &data); \
++ *value = (type)data; \
++ spin_unlock_irqrestore(&pci_lock, flags); \
++ return res; \
++}
++#endif
+ #define PCI_OP_WRITE(size,type,len) \
+ int pci_bus_write_config_##size \
+ (struct pci_bus *bus, unsigned int devfn, int pos, type value) \
+diff -Nur linux-2.6.21.1/drivers/pci/access.c.orig linux-2.6.21.1-owrt/drivers/pci/access.c.orig
+--- linux-2.6.21.1/drivers/pci/access.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/pci/access.c.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,173 @@
++#include <linux/pci.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/ioport.h>
++#include <linux/wait.h>
++
++#include "pci.h"
++
++/*
++ * This interrupt-safe spinlock protects all accesses to PCI
++ * configuration space.
++ */
++
++static DEFINE_SPINLOCK(pci_lock);
++
++/*
++ * Wrappers for all PCI configuration access functions. They just check
++ * alignment, do locking and call the low-level functions pointed to
++ * by pci_dev->ops.
++ */
++
++#define PCI_byte_BAD 0
++#define PCI_word_BAD (pos & 1)
++#define PCI_dword_BAD (pos & 3)
++
++#define PCI_OP_READ(size,type,len) \
++int pci_bus_read_config_##size \
++ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
++{ \
++ int res; \
++ unsigned long flags; \
++ u32 data = 0; \
++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
++ spin_lock_irqsave(&pci_lock, flags); \
++ res = bus->ops->read(bus, devfn, pos, len, &data); \
++ *value = (type)data; \
++ spin_unlock_irqrestore(&pci_lock, flags); \
++ return res; \
++}
++
++#define PCI_OP_WRITE(size,type,len) \
++int pci_bus_write_config_##size \
++ (struct pci_bus *bus, unsigned int devfn, int pos, type value) \
++{ \
++ int res; \
++ unsigned long flags; \
++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
++ spin_lock_irqsave(&pci_lock, flags); \
++ res = bus->ops->write(bus, devfn, pos, len, value); \
++ spin_unlock_irqrestore(&pci_lock, flags); \
++ return res; \
++}
++
++PCI_OP_READ(byte, u8, 1)
++PCI_OP_READ(word, u16, 2)
++PCI_OP_READ(dword, u32, 4)
++PCI_OP_WRITE(byte, u8, 1)
++PCI_OP_WRITE(word, u16, 2)
++PCI_OP_WRITE(dword, u32, 4)
++
++EXPORT_SYMBOL(pci_bus_read_config_byte);
++EXPORT_SYMBOL(pci_bus_read_config_word);
++EXPORT_SYMBOL(pci_bus_read_config_dword);
++EXPORT_SYMBOL(pci_bus_write_config_byte);
++EXPORT_SYMBOL(pci_bus_write_config_word);
++EXPORT_SYMBOL(pci_bus_write_config_dword);
++
++/*
++ * The following routines are to prevent the user from accessing PCI config
++ * space when it's unsafe to do so. Some devices require this during BIST and
++ * we're required to prevent it during D-state transitions.
++ *
++ * We have a bit per device to indicate it's blocked and a global wait queue
++ * for callers to sleep on until devices are unblocked.
++ */
++static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
++
++static noinline void pci_wait_ucfg(struct pci_dev *dev)
++{
++ DECLARE_WAITQUEUE(wait, current);
++
++ __add_wait_queue(&pci_ucfg_wait, &wait);
++ do {
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ spin_unlock_irq(&pci_lock);
++ schedule();
++ spin_lock_irq(&pci_lock);
++ } while (dev->block_ucfg_access);
++ __remove_wait_queue(&pci_ucfg_wait, &wait);
++}
++
++#define PCI_USER_READ_CONFIG(size,type) \
++int pci_user_read_config_##size \
++ (struct pci_dev *dev, int pos, type *val) \
++{ \
++ int ret = 0; \
++ u32 data = -1; \
++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
++ spin_lock_irq(&pci_lock); \
++ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
++ ret = dev->bus->ops->read(dev->bus, dev->devfn, \
++ pos, sizeof(type), &data); \
++ spin_unlock_irq(&pci_lock); \
++ *val = (type)data; \
++ return ret; \
++}
++
++#define PCI_USER_WRITE_CONFIG(size,type) \
++int pci_user_write_config_##size \
++ (struct pci_dev *dev, int pos, type val) \
++{ \
++ int ret = -EIO; \
++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
++ spin_lock_irq(&pci_lock); \
++ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
++ ret = dev->bus->ops->write(dev->bus, dev->devfn, \
++ pos, sizeof(type), val); \
++ spin_unlock_irq(&pci_lock); \
++ return ret; \
++}
++
++PCI_USER_READ_CONFIG(byte, u8)
++PCI_USER_READ_CONFIG(word, u16)
++PCI_USER_READ_CONFIG(dword, u32)
++PCI_USER_WRITE_CONFIG(byte, u8)
++PCI_USER_WRITE_CONFIG(word, u16)
++PCI_USER_WRITE_CONFIG(dword, u32)
++
++/**
++ * pci_block_user_cfg_access - Block userspace PCI config reads/writes
++ * @dev: pci device struct
++ *
++ * When user access is blocked, any reads or writes to config space will
++ * sleep until access is unblocked again. We don't allow nesting of
++ * block/unblock calls.
++ */
++void pci_block_user_cfg_access(struct pci_dev *dev)
++{
++ unsigned long flags;
++ int was_blocked;
++
++ spin_lock_irqsave(&pci_lock, flags);
++ was_blocked = dev->block_ucfg_access;
++ dev->block_ucfg_access = 1;
++ spin_unlock_irqrestore(&pci_lock, flags);
++
++ /* If we BUG() inside the pci_lock, we're guaranteed to hose
++ * the machine */
++ BUG_ON(was_blocked);
++}
++EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
++
++/**
++ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
++ * @dev: pci device struct
++ *
++ * This function allows userspace PCI config accesses to resume.
++ */
++void pci_unblock_user_cfg_access(struct pci_dev *dev)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&pci_lock, flags);
++
++ /* This indicates a problem in the caller, but we don't need
++ * to kill them, unlike a double-block above. */
++ WARN_ON(!dev->block_ucfg_access);
++
++ dev->block_ucfg_access = 0;
++ wake_up_all(&pci_ucfg_wait);
++ spin_unlock_irqrestore(&pci_lock, flags);
++}
++EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
+diff -Nur linux-2.6.21.1/drivers/serial/8250.c linux-2.6.21.1-owrt/drivers/serial/8250.c
+--- linux-2.6.21.1/drivers/serial/8250.c 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/serial/8250.c 2007-05-23 23:37:11.000000000 +0200
+@@ -1635,7 +1635,7 @@
+ {
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+- unsigned char lsr, iir;
++// unsigned char lsr, iir;
+ int retval;
+
+ up->capabilities = uart_config[up->port.type].flags;
+@@ -1772,6 +1772,8 @@
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+
++// For some reason this test causes problems on the AP6x serial console
++#if 0
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+@@ -1790,7 +1792,8 @@
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+-
++#endif
++
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+diff -Nur linux-2.6.21.1/drivers/serial/8250.c.orig linux-2.6.21.1-owrt/drivers/serial/8250.c.orig
+--- linux-2.6.21.1/drivers/serial/8250.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/serial/8250.c.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,2817 @@
++/*
++ * linux/drivers/char/8250.c
++ *
++ * Driver for 8250/16550-type serial ports
++ *
++ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
++ *
++ * Copyright (C) 2001 Russell King.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
++ *
++ * A note about mapbase / membase
++ *
++ * mapbase is the physical address of the IO port.
++ * membase is an 'ioremapped' cookie.
++ */
++
++#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial_reg.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/nmi.h>
++#include <linux/mutex.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include "8250.h"
++
++/*
++ * Configuration:
++ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
++ * is unsafe when used on edge-triggered interrupts.
++ */
++static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
++
++static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
++
++/*
++ * Debugging.
++ */
++#if 0
++#define DEBUG_AUTOCONF(fmt...) printk(fmt)
++#else
++#define DEBUG_AUTOCONF(fmt...) do { } while (0)
++#endif
++
++#if 0
++#define DEBUG_INTR(fmt...) printk(fmt)
++#else
++#define DEBUG_INTR(fmt...) do { } while (0)
++#endif
++
++#define PASS_LIMIT 256
++
++/*
++ * We default to IRQ0 for the "no irq" hack. Some
++ * machine types want others as well - they're free
++ * to redefine this in their header file.
++ */
++#define is_real_interrupt(irq) ((irq) != 0)
++
++#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
++#define CONFIG_SERIAL_DETECT_IRQ 1
++#endif
++#ifdef CONFIG_SERIAL_8250_MANY_PORTS
++#define CONFIG_SERIAL_MANY_PORTS 1
++#endif
++
++/*
++ * HUB6 is always on. This will be removed once the header
++ * files have been cleaned.
++ */
++#define CONFIG_HUB6 1
++
++#include <asm/serial.h>
++
++/*
++ * SERIAL_PORT_DFNS tells us about built-in ports that have no
++ * standard enumeration mechanism. Platforms that can find all
++ * serial ports via mechanisms like ACPI or PCI need not supply it.
++ */
++#ifndef SERIAL_PORT_DFNS
++#define SERIAL_PORT_DFNS
++#endif
++
++static const struct old_serial_port old_serial_port[] = {
++ SERIAL_PORT_DFNS /* defined in asm/serial.h */
++};
++
++#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
++
++#ifdef CONFIG_SERIAL_8250_RSA
++
++#define PORT_RSA_MAX 4
++static unsigned long probe_rsa[PORT_RSA_MAX];
++static unsigned int probe_rsa_count;
++#endif /* CONFIG_SERIAL_8250_RSA */
++
++struct uart_8250_port {
++ struct uart_port port;
++ struct timer_list timer; /* "no irq" timer */
++ struct list_head list; /* ports on this IRQ */
++ unsigned short capabilities; /* port capabilities */
++ unsigned short bugs; /* port bugs */
++ unsigned int tx_loadsz; /* transmit fifo load size */
++ unsigned char acr;
++ unsigned char ier;
++ unsigned char lcr;
++ unsigned char mcr;
++ unsigned char mcr_mask; /* mask of user bits */
++ unsigned char mcr_force; /* mask of forced bits */
++ unsigned char lsr_break_flag;
++
++ /*
++ * We provide a per-port pm hook.
++ */
++ void (*pm)(struct uart_port *port,
++ unsigned int state, unsigned int old);
++};
++
++struct irq_info {
++ spinlock_t lock;
++ struct list_head *head;
++};
++
++static struct irq_info irq_lists[NR_IRQS];
++
++/*
++ * Here we define the default xmit fifo size used for each type of UART.
++ */
++static const struct serial8250_config uart_config[] = {
++ [PORT_UNKNOWN] = {
++ .name = "unknown",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_8250] = {
++ .name = "8250",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_16450] = {
++ .name = "16450",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_16550] = {
++ .name = "16550",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_16550A] = {
++ .name = "16550A",
++ .fifo_size = 16,
++ .tx_loadsz = 16,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
++ .flags = UART_CAP_FIFO,
++ },
++ [PORT_CIRRUS] = {
++ .name = "Cirrus",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_16650] = {
++ .name = "ST16650",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
++ },
++ [PORT_16650V2] = {
++ .name = "ST16650V2",
++ .fifo_size = 32,
++ .tx_loadsz = 16,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
++ UART_FCR_T_TRIG_00,
++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
++ },
++ [PORT_16750] = {
++ .name = "TI16750",
++ .fifo_size = 64,
++ .tx_loadsz = 64,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
++ UART_FCR7_64BYTE,
++ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
++ },
++ [PORT_STARTECH] = {
++ .name = "Startech",
++ .fifo_size = 1,
++ .tx_loadsz = 1,
++ },
++ [PORT_16C950] = {
++ .name = "16C950/954",
++ .fifo_size = 128,
++ .tx_loadsz = 128,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
++ .flags = UART_CAP_FIFO,
++ },
++ [PORT_16654] = {
++ .name = "ST16654",
++ .fifo_size = 64,
++ .tx_loadsz = 32,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
++ UART_FCR_T_TRIG_10,
++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
++ },
++ [PORT_16850] = {
++ .name = "XR16850",
++ .fifo_size = 128,
++ .tx_loadsz = 128,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
++ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
++ },
++ [PORT_RSA] = {
++ .name = "RSA",
++ .fifo_size = 2048,
++ .tx_loadsz = 2048,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
++ .flags = UART_CAP_FIFO,
++ },
++ [PORT_NS16550A] = {
++ .name = "NS16550A",
++ .fifo_size = 16,
++ .tx_loadsz = 16,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
++ .flags = UART_CAP_FIFO | UART_NATSEMI,
++ },
++ [PORT_XSCALE] = {
++ .name = "XScale",
++ .fifo_size = 32,
++ .tx_loadsz = 32,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
++ .flags = UART_CAP_FIFO | UART_CAP_UUE,
++ },
++};
++
++#ifdef CONFIG_SERIAL_8250_AU1X00
++
++/* Au1x00 UART hardware has a weird register layout */
++static const u8 au_io_in_map[] = {
++ [UART_RX] = 0,
++ [UART_IER] = 2,
++ [UART_IIR] = 3,
++ [UART_LCR] = 5,
++ [UART_MCR] = 6,
++ [UART_LSR] = 7,
++ [UART_MSR] = 8,
++};
++
++static const u8 au_io_out_map[] = {
++ [UART_TX] = 1,
++ [UART_IER] = 2,
++ [UART_FCR] = 4,
++ [UART_LCR] = 5,
++ [UART_MCR] = 6,
++};
++
++/* sane hardware needs no mapping */
++static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
++{
++ if (up->port.iotype != UPIO_AU)
++ return offset;
++ return au_io_in_map[offset];
++}
++
++static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
++{
++ if (up->port.iotype != UPIO_AU)
++ return offset;
++ return au_io_out_map[offset];
++}
++
++#else
++
++/* sane hardware needs no mapping */
++#define map_8250_in_reg(up, offset) (offset)
++#define map_8250_out_reg(up, offset) (offset)
++
++#endif
++
++static unsigned int serial_in(struct uart_8250_port *up, int offset)
++{
++ unsigned int tmp;
++ offset = map_8250_in_reg(up, offset) << up->port.regshift;
++
++ switch (up->port.iotype) {
++ case UPIO_HUB6:
++ outb(up->port.hub6 - 1 + offset, up->port.iobase);
++ return inb(up->port.iobase + 1);
++
++ case UPIO_MEM:
++ return readb(up->port.membase + offset);
++
++ case UPIO_MEM32:
++ return readl(up->port.membase + offset);
++
++#ifdef CONFIG_SERIAL_8250_AU1X00
++ case UPIO_AU:
++ return __raw_readl(up->port.membase + offset);
++#endif
++
++ case UPIO_TSI:
++ if (offset == UART_IIR) {
++ tmp = readl(up->port.membase + (UART_IIR & ~3));
++ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
++ } else
++ return readb(up->port.membase + offset);
++
++ default:
++ return inb(up->port.iobase + offset);
++ }
++}
++
++static void
++serial_out(struct uart_8250_port *up, int offset, int value)
++{
++ offset = map_8250_out_reg(up, offset) << up->port.regshift;
++
++ switch (up->port.iotype) {
++ case UPIO_HUB6:
++ outb(up->port.hub6 - 1 + offset, up->port.iobase);
++ outb(value, up->port.iobase + 1);
++ break;
++
++ case UPIO_MEM:
++ writeb(value, up->port.membase + offset);
++ break;
++
++ case UPIO_MEM32:
++ writel(value, up->port.membase + offset);
++ break;
++
++#ifdef CONFIG_SERIAL_8250_AU1X00
++ case UPIO_AU:
++ __raw_writel(value, up->port.membase + offset);
++ break;
++#endif
++ case UPIO_TSI:
++ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
++ writeb(value, up->port.membase + offset);
++ break;
++
++ default:
++ outb(value, up->port.iobase + offset);
++ }
++}
++
++static void
++serial_out_sync(struct uart_8250_port *up, int offset, int value)
++{
++ switch (up->port.iotype) {
++ case UPIO_MEM:
++ case UPIO_MEM32:
++#ifdef CONFIG_SERIAL_8250_AU1X00
++ case UPIO_AU:
++#endif
++ serial_out(up, offset, value);
++ serial_in(up, UART_LCR); /* safe, no side-effects */
++ break;
++ default:
++ serial_out(up, offset, value);
++ }
++}
++
++/*
++ * We used to support using pause I/O for certain machines. We
++ * haven't supported this for a while, but just in case it's badly
++ * needed for certain old 386 machines, I've left these #define's
++ * in....
++ */
++#define serial_inp(up, offset) serial_in(up, offset)
++#define serial_outp(up, offset, value) serial_out(up, offset, value)
++
++/* Uart divisor latch read */
++static inline int _serial_dl_read(struct uart_8250_port *up)
++{
++ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
++}
++
++/* Uart divisor latch write */
++static inline void _serial_dl_write(struct uart_8250_port *up, int value)
++{
++ serial_outp(up, UART_DLL, value & 0xff);
++ serial_outp(up, UART_DLM, value >> 8 & 0xff);
++}
++
++#ifdef CONFIG_SERIAL_8250_AU1X00
++/* Au1x00 haven't got a standard divisor latch */
++static int serial_dl_read(struct uart_8250_port *up)
++{
++ if (up->port.iotype == UPIO_AU)
++ return __raw_readl(up->port.membase + 0x28);
++ else
++ return _serial_dl_read(up);
++}
++
++static void serial_dl_write(struct uart_8250_port *up, int value)
++{
++ if (up->port.iotype == UPIO_AU)
++ __raw_writel(value, up->port.membase + 0x28);
++ else
++ _serial_dl_write(up, value);
++}
++#else
++#define serial_dl_read(up) _serial_dl_read(up)
++#define serial_dl_write(up, value) _serial_dl_write(up, value)
++#endif
++
++/*
++ * For the 16C950
++ */
++static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
++{
++ serial_out(up, UART_SCR, offset);
++ serial_out(up, UART_ICR, value);
++}
++
++static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
++{
++ unsigned int value;
++
++ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
++ serial_out(up, UART_SCR, offset);
++ value = serial_in(up, UART_ICR);
++ serial_icr_write(up, UART_ACR, up->acr);
++
++ return value;
++}
++
++/*
++ * FIFO support.
++ */
++static inline void serial8250_clear_fifos(struct uart_8250_port *p)
++{
++ if (p->capabilities & UART_CAP_FIFO) {
++ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
++ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
++ serial_outp(p, UART_FCR, 0);
++ }
++}
++
++/*
++ * IER sleep support. UARTs which have EFRs need the "extended
++ * capability" bit enabled. Note that on XR16C850s, we need to
++ * reset LCR to write to IER.
++ */
++static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
++{
++ if (p->capabilities & UART_CAP_SLEEP) {
++ if (p->capabilities & UART_CAP_EFR) {
++ serial_outp(p, UART_LCR, 0xBF);
++ serial_outp(p, UART_EFR, UART_EFR_ECB);
++ serial_outp(p, UART_LCR, 0);
++ }
++ serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
++ if (p->capabilities & UART_CAP_EFR) {
++ serial_outp(p, UART_LCR, 0xBF);
++ serial_outp(p, UART_EFR, 0);
++ serial_outp(p, UART_LCR, 0);
++ }
++ }
++}
++
++#ifdef CONFIG_SERIAL_8250_RSA
++/*
++ * Attempts to turn on the RSA FIFO. Returns zero on failure.
++ * We set the port uart clock rate if we succeed.
++ */
++static int __enable_rsa(struct uart_8250_port *up)
++{
++ unsigned char mode;
++ int result;
++
++ mode = serial_inp(up, UART_RSA_MSR);
++ result = mode & UART_RSA_MSR_FIFO;
++
++ if (!result) {
++ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
++ mode = serial_inp(up, UART_RSA_MSR);
++ result = mode & UART_RSA_MSR_FIFO;
++ }
++
++ if (result)
++ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
++
++ return result;
++}
++
++static void enable_rsa(struct uart_8250_port *up)
++{
++ if (up->port.type == PORT_RSA) {
++ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
++ spin_lock_irq(&up->port.lock);
++ __enable_rsa(up);
++ spin_unlock_irq(&up->port.lock);
++ }
++ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
++ serial_outp(up, UART_RSA_FRR, 0);
++ }
++}
++
++/*
++ * Attempts to turn off the RSA FIFO. Returns zero on failure.
++ * It is unknown why interrupts were disabled in here. However,
++ * the caller is expected to preserve this behaviour by grabbing
++ * the spinlock before calling this function.
++ */
++static void disable_rsa(struct uart_8250_port *up)
++{
++ unsigned char mode;
++ int result;
++
++ if (up->port.type == PORT_RSA &&
++ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
++ spin_lock_irq(&up->port.lock);
++
++ mode = serial_inp(up, UART_RSA_MSR);
++ result = !(mode & UART_RSA_MSR_FIFO);
++
++ if (!result) {
++ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
++ mode = serial_inp(up, UART_RSA_MSR);
++ result = !(mode & UART_RSA_MSR_FIFO);
++ }
++
++ if (result)
++ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
++ spin_unlock_irq(&up->port.lock);
++ }
++}
++#endif /* CONFIG_SERIAL_8250_RSA */
++
++/*
++ * This is a quickie test to see how big the FIFO is.
++ * It doesn't work at all the time, more's the pity.
++ */
++static int size_fifo(struct uart_8250_port *up)
++{
++ unsigned char old_fcr, old_mcr, old_lcr;
++ unsigned short old_dl;
++ int count;
++
++ old_lcr = serial_inp(up, UART_LCR);
++ serial_outp(up, UART_LCR, 0);
++ old_fcr = serial_inp(up, UART_FCR);
++ old_mcr = serial_inp(up, UART_MCR);
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
++ serial_outp(up, UART_MCR, UART_MCR_LOOP);
++ serial_outp(up, UART_LCR, UART_LCR_DLAB);
++ old_dl = serial_dl_read(up);
++ serial_dl_write(up, 0x0001);
++ serial_outp(up, UART_LCR, 0x03);
++ for (count = 0; count < 256; count++)
++ serial_outp(up, UART_TX, count);
++ mdelay(20);/* FIXME - schedule_timeout */
++ for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
++ (count < 256); count++)
++ serial_inp(up, UART_RX);
++ serial_outp(up, UART_FCR, old_fcr);
++ serial_outp(up, UART_MCR, old_mcr);
++ serial_outp(up, UART_LCR, UART_LCR_DLAB);
++ serial_dl_write(up, old_dl);
++ serial_outp(up, UART_LCR, old_lcr);
++
++ return count;
++}
++
++/*
++ * Read UART ID using the divisor method - set DLL and DLM to zero
++ * and the revision will be in DLL and device type in DLM. We
++ * preserve the device state across this.
++ */
++static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
++{
++ unsigned char old_dll, old_dlm, old_lcr;
++ unsigned int id;
++
++ old_lcr = serial_inp(p, UART_LCR);
++ serial_outp(p, UART_LCR, UART_LCR_DLAB);
++
++ old_dll = serial_inp(p, UART_DLL);
++ old_dlm = serial_inp(p, UART_DLM);
++
++ serial_outp(p, UART_DLL, 0);
++ serial_outp(p, UART_DLM, 0);
++
++ id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
++
++ serial_outp(p, UART_DLL, old_dll);
++ serial_outp(p, UART_DLM, old_dlm);
++ serial_outp(p, UART_LCR, old_lcr);
++
++ return id;
++}
++
++/*
++ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
++ * When this function is called we know it is at least a StarTech
++ * 16650 V2, but it might be one of several StarTech UARTs, or one of
++ * its clones. (We treat the broken original StarTech 16650 V1 as a
++ * 16550, and why not? Startech doesn't seem to even acknowledge its
++ * existence.)
++ *
++ * What evil have men's minds wrought...
++ */
++static void autoconfig_has_efr(struct uart_8250_port *up)
++{
++ unsigned int id1, id2, id3, rev;
++
++ /*
++ * Everything with an EFR has SLEEP
++ */
++ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
++
++ /*
++ * First we check to see if it's an Oxford Semiconductor UART.
++ *
++ * If we have to do this here because some non-National
++ * Semiconductor clone chips lock up if you try writing to the
++ * LSR register (which serial_icr_read does)
++ */
++
++ /*
++ * Check for Oxford Semiconductor 16C950.
++ *
++ * EFR [4] must be set else this test fails.
++ *
++ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
++ * claims that it's needed for 952 dual UART's (which are not
++ * recommended for new designs).
++ */
++ up->acr = 0;
++ serial_out(up, UART_LCR, 0xBF);
++ serial_out(up, UART_EFR, UART_EFR_ECB);
++ serial_out(up, UART_LCR, 0x00);
++ id1 = serial_icr_read(up, UART_ID1);
++ id2 = serial_icr_read(up, UART_ID2);
++ id3 = serial_icr_read(up, UART_ID3);
++ rev = serial_icr_read(up, UART_REV);
++
++ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
++
++ if (id1 == 0x16 && id2 == 0xC9 &&
++ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
++ up->port.type = PORT_16C950;
++
++ /*
++ * Enable work around for the Oxford Semiconductor 952 rev B
++ * chip which causes it to seriously miscalculate baud rates
++ * when DLL is 0.
++ */
++ if (id3 == 0x52 && rev == 0x01)
++ up->bugs |= UART_BUG_QUOT;
++ return;
++ }
++
++ /*
++ * We check for a XR16C850 by setting DLL and DLM to 0, and then
++ * reading back DLL and DLM. The chip type depends on the DLM
++ * value read back:
++ * 0x10 - XR16C850 and the DLL contains the chip revision.
++ * 0x12 - XR16C2850.
++ * 0x14 - XR16C854.
++ */
++ id1 = autoconfig_read_divisor_id(up);
++ DEBUG_AUTOCONF("850id=%04x ", id1);
++
++ id2 = id1 >> 8;
++ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
++ up->port.type = PORT_16850;
++ return;
++ }
++
++ /*
++ * It wasn't an XR16C850.
++ *
++ * We distinguish between the '654 and the '650 by counting
++ * how many bytes are in the FIFO. I'm using this for now,
++ * since that's the technique that was sent to me in the
++ * serial driver update, but I'm not convinced this works.
++ * I've had problems doing this in the past. -TYT
++ */
++ if (size_fifo(up) == 64)
++ up->port.type = PORT_16654;
++ else
++ up->port.type = PORT_16650V2;
++}
++
++/*
++ * We detected a chip without a FIFO. Only two fall into
++ * this category - the original 8250 and the 16450. The
++ * 16450 has a scratch register (accessible with LCR=0)
++ */
++static void autoconfig_8250(struct uart_8250_port *up)
++{
++ unsigned char scratch, status1, status2;
++
++ up->port.type = PORT_8250;
++
++ scratch = serial_in(up, UART_SCR);
++ serial_outp(up, UART_SCR, 0xa5);
++ status1 = serial_in(up, UART_SCR);
++ serial_outp(up, UART_SCR, 0x5a);
++ status2 = serial_in(up, UART_SCR);
++ serial_outp(up, UART_SCR, scratch);
++
++ if (status1 == 0xa5 && status2 == 0x5a)
++ up->port.type = PORT_16450;
++}
++
++static int broken_efr(struct uart_8250_port *up)
++{
++ /*
++ * Exar ST16C2550 "A2" devices incorrectly detect as
++ * having an EFR, and report an ID of 0x0201. See
++ * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
++ */
++ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
++ return 1;
++
++ return 0;
++}
++
++/*
++ * We know that the chip has FIFOs. Does it have an EFR? The
++ * EFR is located in the same register position as the IIR and
++ * we know the top two bits of the IIR are currently set. The
++ * EFR should contain zero. Try to read the EFR.
++ */
++static void autoconfig_16550a(struct uart_8250_port *up)
++{
++ unsigned char status1, status2;
++ unsigned int iersave;
++
++ up->port.type = PORT_16550A;
++ up->capabilities |= UART_CAP_FIFO;
++
++ /*
++ * Check for presence of the EFR when DLAB is set.
++ * Only ST16C650V1 UARTs pass this test.
++ */
++ serial_outp(up, UART_LCR, UART_LCR_DLAB);
++ if (serial_in(up, UART_EFR) == 0) {
++ serial_outp(up, UART_EFR, 0xA8);
++ if (serial_in(up, UART_EFR) != 0) {
++ DEBUG_AUTOCONF("EFRv1 ");
++ up->port.type = PORT_16650;
++ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
++ } else {
++ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
++ }
++ serial_outp(up, UART_EFR, 0);
++ return;
++ }
++
++ /*
++ * Maybe it requires 0xbf to be written to the LCR.
++ * (other ST16C650V2 UARTs, TI16C752A, etc)
++ */
++ serial_outp(up, UART_LCR, 0xBF);
++ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
++ DEBUG_AUTOCONF("EFRv2 ");
++ autoconfig_has_efr(up);
++ return;
++ }
++
++ /*
++ * Check for a National Semiconductor SuperIO chip.
++ * Attempt to switch to bank 2, read the value of the LOOP bit
++ * from EXCR1. Switch back to bank 0, change it in MCR. Then
++ * switch back to bank 2, read it from EXCR1 again and check
++ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
++ */
++ serial_outp(up, UART_LCR, 0);
++ status1 = serial_in(up, UART_MCR);
++ serial_outp(up, UART_LCR, 0xE0);
++ status2 = serial_in(up, 0x02); /* EXCR1 */
++
++ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
++ serial_outp(up, UART_LCR, 0);
++ serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
++ serial_outp(up, UART_LCR, 0xE0);
++ status2 = serial_in(up, 0x02); /* EXCR1 */
++ serial_outp(up, UART_LCR, 0);
++ serial_outp(up, UART_MCR, status1);
++
++ if ((status2 ^ status1) & UART_MCR_LOOP) {
++ unsigned short quot;
++
++ serial_outp(up, UART_LCR, 0xE0);
++
++ quot = serial_dl_read(up);
++ quot <<= 3;
++
++ status1 = serial_in(up, 0x04); /* EXCR1 */
++ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
++ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
++ serial_outp(up, 0x04, status1);
++
++ serial_dl_write(up, quot);
++
++ serial_outp(up, UART_LCR, 0);
++
++ up->port.uartclk = 921600*16;
++ up->port.type = PORT_NS16550A;
++ up->capabilities |= UART_NATSEMI;
++ return;
++ }
++ }
++
++ /*
++ * No EFR. Try to detect a TI16750, which only sets bit 5 of
++ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
++ * Try setting it with and without DLAB set. Cheap clones
++ * set bit 5 without DLAB set.
++ */
++ serial_outp(up, UART_LCR, 0);
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
++ status1 = serial_in(up, UART_IIR) >> 5;
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
++ serial_outp(up, UART_LCR, UART_LCR_DLAB);
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
++ status2 = serial_in(up, UART_IIR) >> 5;
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
++ serial_outp(up, UART_LCR, 0);
++
++ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
++
++ if (status1 == 6 && status2 == 7) {
++ up->port.type = PORT_16750;
++ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
++ return;
++ }
++
++ /*
++ * Try writing and reading the UART_IER_UUE bit (b6).
++ * If it works, this is probably one of the Xscale platform's
++ * internal UARTs.
++ * We're going to explicitly set the UUE bit to 0 before
++ * trying to write and read a 1 just to make sure it's not
++ * already a 1 and maybe locked there before we even start start.
++ */
++ iersave = serial_in(up, UART_IER);
++ serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
++ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
++ /*
++ * OK it's in a known zero state, try writing and reading
++ * without disturbing the current state of the other bits.
++ */
++ serial_outp(up, UART_IER, iersave | UART_IER_UUE);
++ if (serial_in(up, UART_IER) & UART_IER_UUE) {
++ /*
++ * It's an Xscale.
++ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
++ */
++ DEBUG_AUTOCONF("Xscale ");
++ up->port.type = PORT_XSCALE;
++ up->capabilities |= UART_CAP_UUE;
++ return;
++ }
++ } else {
++ /*
++ * If we got here we couldn't force the IER_UUE bit to 0.
++ * Log it and continue.
++ */
++ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
++ }
++ serial_outp(up, UART_IER, iersave);
++}
++
++/*
++ * This routine is called by rs_init() to initialize a specific serial
++ * port. It determines what type of UART chip this serial port is
++ * using: 8250, 16450, 16550, 16550A. The important question is
++ * whether or not this UART is a 16550A or not, since this will
++ * determine whether or not we can use its FIFO features or not.
++ */
++static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
++{
++ unsigned char status1, scratch, scratch2, scratch3;
++ unsigned char save_lcr, save_mcr;
++ unsigned long flags;
++
++ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
++ return;
++
++ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
++ up->port.line, up->port.iobase, up->port.membase);
++
++ /*
++ * We really do need global IRQs disabled here - we're going to
++ * be frobbing the chips IRQ enable register to see if it exists.
++ */
++ spin_lock_irqsave(&up->port.lock, flags);
++// save_flags(flags); cli();
++
++ up->capabilities = 0;
++ up->bugs = 0;
++
++ if (!(up->port.flags & UPF_BUGGY_UART)) {
++ /*
++ * Do a simple existence test first; if we fail this,
++ * there's no point trying anything else.
++ *
++ * 0x80 is used as a nonsense port to prevent against
++ * false positives due to ISA bus float. The
++ * assumption is that 0x80 is a non-existent port;
++ * which should be safe since include/asm/io.h also
++ * makes this assumption.
++ *
++ * Note: this is safe as long as MCR bit 4 is clear
++ * and the device is in "PC" mode.
++ */
++ scratch = serial_inp(up, UART_IER);
++ serial_outp(up, UART_IER, 0);
++#ifdef __i386__
++ outb(0xff, 0x080);
++#endif
++ /*
++ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
++ * 16C754B) allow only to modify them if an EFR bit is set.
++ */
++ scratch2 = serial_inp(up, UART_IER) & 0x0f;
++ serial_outp(up, UART_IER, 0x0F);
++#ifdef __i386__
++ outb(0, 0x080);
++#endif
++ scratch3 = serial_inp(up, UART_IER) & 0x0f;
++ serial_outp(up, UART_IER, scratch);
++ if (scratch2 != 0 || scratch3 != 0x0F) {
++ /*
++ * We failed; there's nothing here
++ */
++ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
++ scratch2, scratch3);
++ goto out;
++ }
++ }
++
++ save_mcr = serial_in(up, UART_MCR);
++ save_lcr = serial_in(up, UART_LCR);
++
++ /*
++ * Check to see if a UART is really there. Certain broken
++ * internal modems based on the Rockwell chipset fail this
++ * test, because they apparently don't implement the loopback
++ * test mode. So this test is skipped on the COM 1 through
++ * COM 4 ports. This *should* be safe, since no board
++ * manufacturer would be stupid enough to design a board
++ * that conflicts with COM 1-4 --- we hope!
++ */
++ if (!(up->port.flags & UPF_SKIP_TEST)) {
++ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
++ status1 = serial_inp(up, UART_MSR) & 0xF0;
++ serial_outp(up, UART_MCR, save_mcr);
++ if (status1 != 0x90) {
++ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
++ status1);
++ goto out;
++ }
++ }
++
++ /*
++ * We're pretty sure there's a port here. Lets find out what
++ * type of port it is. The IIR top two bits allows us to find
++ * out if it's 8250 or 16450, 16550, 16550A or later. This
++ * determines what we test for next.
++ *
++ * We also initialise the EFR (if any) to zero for later. The
++ * EFR occupies the same register location as the FCR and IIR.
++ */
++ serial_outp(up, UART_LCR, 0xBF);
++ serial_outp(up, UART_EFR, 0);
++ serial_outp(up, UART_LCR, 0);
++
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
++ scratch = serial_in(up, UART_IIR) >> 6;
++
++ DEBUG_AUTOCONF("iir=%d ", scratch);
++
++ switch (scratch) {
++ case 0:
++ autoconfig_8250(up);
++ break;
++ case 1:
++ up->port.type = PORT_UNKNOWN;
++ break;
++ case 2:
++ up->port.type = PORT_16550;
++ break;
++ case 3:
++ autoconfig_16550a(up);
++ break;
++ }
++
++#ifdef CONFIG_SERIAL_8250_RSA
++ /*
++ * Only probe for RSA ports if we got the region.
++ */
++ if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
++ int i;
++
++ for (i = 0 ; i < probe_rsa_count; ++i) {
++ if (probe_rsa[i] == up->port.iobase &&
++ __enable_rsa(up)) {
++ up->port.type = PORT_RSA;
++ break;
++ }
++ }
++ }
++#endif
++
++#ifdef CONFIG_SERIAL_8250_AU1X00
++ /* if access method is AU, it is a 16550 with a quirk */
++ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
++ up->bugs |= UART_BUG_NOMSR;
++#endif
++
++ serial_outp(up, UART_LCR, save_lcr);
++
++ if (up->capabilities != uart_config[up->port.type].flags) {
++ printk(KERN_WARNING
++ "ttyS%d: detected caps %08x should be %08x\n",
++ up->port.line, up->capabilities,
++ uart_config[up->port.type].flags);
++ }
++
++ up->port.fifosize = uart_config[up->port.type].fifo_size;
++ up->capabilities = uart_config[up->port.type].flags;
++ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
++
++ if (up->port.type == PORT_UNKNOWN)
++ goto out;
++
++ /*
++ * Reset the UART.
++ */
++#ifdef CONFIG_SERIAL_8250_RSA
++ if (up->port.type == PORT_RSA)
++ serial_outp(up, UART_RSA_FRR, 0);
++#endif
++ serial_outp(up, UART_MCR, save_mcr);
++ serial8250_clear_fifos(up);
++ serial_in(up, UART_RX);
++ if (up->capabilities & UART_CAP_UUE)
++ serial_outp(up, UART_IER, UART_IER_UUE);
++ else
++ serial_outp(up, UART_IER, 0);
++
++ out:
++ spin_unlock_irqrestore(&up->port.lock, flags);
++// restore_flags(flags);
++ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
++}
++
++static void autoconfig_irq(struct uart_8250_port *up)
++{
++ unsigned char save_mcr, save_ier;
++ unsigned char save_ICP = 0;
++ unsigned int ICP = 0;
++ unsigned long irqs;
++ int irq;
++
++ if (up->port.flags & UPF_FOURPORT) {
++ ICP = (up->port.iobase & 0xfe0) | 0x1f;
++ save_ICP = inb_p(ICP);
++ outb_p(0x80, ICP);
++ (void) inb_p(ICP);
++ }
++
++ /* forget possible initially masked and pending IRQ */
++ probe_irq_off(probe_irq_on());
++ save_mcr = serial_inp(up, UART_MCR);
++ save_ier = serial_inp(up, UART_IER);
++ serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
++
++ irqs = probe_irq_on();
++ serial_outp(up, UART_MCR, 0);
++ udelay (10);
++ if (up->port.flags & UPF_FOURPORT) {
++ serial_outp(up, UART_MCR,
++ UART_MCR_DTR | UART_MCR_RTS);
++ } else {
++ serial_outp(up, UART_MCR,
++ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
++ }
++ serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
++ (void)serial_inp(up, UART_LSR);
++ (void)serial_inp(up, UART_RX);
++ (void)serial_inp(up, UART_IIR);
++ (void)serial_inp(up, UART_MSR);
++ serial_outp(up, UART_TX, 0xFF);
++ udelay (20);
++ irq = probe_irq_off(irqs);
++
++ serial_outp(up, UART_MCR, save_mcr);
++ serial_outp(up, UART_IER, save_ier);
++
++ if (up->port.flags & UPF_FOURPORT)
++ outb_p(save_ICP, ICP);
++
++ up->port.irq = (irq > 0) ? irq : 0;
++}
++
++static inline void __stop_tx(struct uart_8250_port *p)
++{
++ if (p->ier & UART_IER_THRI) {
++ p->ier &= ~UART_IER_THRI;
++ serial_out(p, UART_IER, p->ier);
++ }
++}
++
++static void serial8250_stop_tx(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ __stop_tx(up);
++
++ /*
++ * We really want to stop the transmitter from sending.
++ */
++ if (up->port.type == PORT_16C950) {
++ up->acr |= UART_ACR_TXDIS;
++ serial_icr_write(up, UART_ACR, up->acr);
++ }
++}
++
++static void transmit_chars(struct uart_8250_port *up);
++
++static void serial8250_start_tx(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ if (!(up->ier & UART_IER_THRI)) {
++ up->ier |= UART_IER_THRI;
++ serial_out(up, UART_IER, up->ier);
++
++ if (up->bugs & UART_BUG_TXEN) {
++ unsigned char lsr, iir;
++ lsr = serial_in(up, UART_LSR);
++ iir = serial_in(up, UART_IIR);
++ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
++ transmit_chars(up);
++ }
++ }
++
++ /*
++ * Re-enable the transmitter if we disabled it.
++ */
++ if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
++ up->acr &= ~UART_ACR_TXDIS;
++ serial_icr_write(up, UART_ACR, up->acr);
++ }
++}
++
++static void serial8250_stop_rx(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ up->ier &= ~UART_IER_RLSI;
++ up->port.read_status_mask &= ~UART_LSR_DR;
++ serial_out(up, UART_IER, up->ier);
++}
++
++static void serial8250_enable_ms(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ /* no MSR capabilities */
++ if (up->bugs & UART_BUG_NOMSR)
++ return;
++
++ up->ier |= UART_IER_MSI;
++ serial_out(up, UART_IER, up->ier);
++}
++
++static void
++receive_chars(struct uart_8250_port *up, unsigned int *status)
++{
++ struct tty_struct *tty = up->port.info->tty;
++ unsigned char ch, lsr = *status;
++ int max_count = 256;
++ char flag;
++
++ do {
++ ch = serial_inp(up, UART_RX);
++ flag = TTY_NORMAL;
++ up->port.icount.rx++;
++
++#ifdef CONFIG_SERIAL_8250_CONSOLE
++ /*
++ * Recover the break flag from console xmit
++ */
++ if (up->port.line == up->port.cons->index) {
++ lsr |= up->lsr_break_flag;
++ up->lsr_break_flag = 0;
++ }
++#endif
++
++ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
++ UART_LSR_FE | UART_LSR_OE))) {
++ /*
++ * For statistics only
++ */
++ if (lsr & UART_LSR_BI) {
++ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
++ up->port.icount.brk++;
++ /*
++ * We do the SysRQ and SAK checking
++ * here because otherwise the break
++ * may get masked by ignore_status_mask
++ * or read_status_mask.
++ */
++ if (uart_handle_break(&up->port))
++ goto ignore_char;
++ } else if (lsr & UART_LSR_PE)
++ up->port.icount.parity++;
++ else if (lsr & UART_LSR_FE)
++ up->port.icount.frame++;
++ if (lsr & UART_LSR_OE)
++ up->port.icount.overrun++;
++
++ /*
++ * Mask off conditions which should be ignored.
++ */
++ lsr &= up->port.read_status_mask;
++
++ if (lsr & UART_LSR_BI) {
++ DEBUG_INTR("handling break....");
++ flag = TTY_BREAK;
++ } else if (lsr & UART_LSR_PE)
++ flag = TTY_PARITY;
++ else if (lsr & UART_LSR_FE)
++ flag = TTY_FRAME;
++ }
++ if (uart_handle_sysrq_char(&up->port, ch))
++ goto ignore_char;
++
++ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
++
++ ignore_char:
++ lsr = serial_inp(up, UART_LSR);
++ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
++ spin_unlock(&up->port.lock);
++ tty_flip_buffer_push(tty);
++ spin_lock(&up->port.lock);
++ *status = lsr;
++}
++
++static void transmit_chars(struct uart_8250_port *up)
++{
++ struct circ_buf *xmit = &up->port.info->xmit;
++ int count;
++
++ if (up->port.x_char) {
++ serial_outp(up, UART_TX, up->port.x_char);
++ up->port.icount.tx++;
++ up->port.x_char = 0;
++ return;
++ }
++ if (uart_tx_stopped(&up->port)) {
++ serial8250_stop_tx(&up->port);
++ return;
++ }
++ if (uart_circ_empty(xmit)) {
++ __stop_tx(up);
++ return;
++ }
++
++ count = up->tx_loadsz;
++ do {
++ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ up->port.icount.tx++;
++ if (uart_circ_empty(xmit))
++ break;
++ } while (--count > 0);
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(&up->port);
++
++ DEBUG_INTR("THRE...");
++
++ if (uart_circ_empty(xmit))
++ __stop_tx(up);
++}
++
++static unsigned int check_modem_status(struct uart_8250_port *up)
++{
++ unsigned int status = serial_in(up, UART_MSR);
++
++ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
++ up->port.info != NULL) {
++ if (status & UART_MSR_TERI)
++ up->port.icount.rng++;
++ if (status & UART_MSR_DDSR)
++ up->port.icount.dsr++;
++ if (status & UART_MSR_DDCD)
++ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
++ if (status & UART_MSR_DCTS)
++ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
++
++ wake_up_interruptible(&up->port.info->delta_msr_wait);
++ }
++
++ return status;
++}
++
++/*
++ * This handles the interrupt from one port.
++ */
++static inline void
++serial8250_handle_port(struct uart_8250_port *up)
++{
++ unsigned int status;
++ unsigned long flags;
++
++ spin_lock_irqsave(&up->port.lock, flags);
++
++ status = serial_inp(up, UART_LSR);
++
++ DEBUG_INTR("status = %x...", status);
++
++ if (status & UART_LSR_DR)
++ receive_chars(up, &status);
++ check_modem_status(up);
++ if (status & UART_LSR_THRE)
++ transmit_chars(up);
++
++ spin_unlock_irqrestore(&up->port.lock, flags);
++}
++
++/*
++ * This is the serial driver's interrupt routine.
++ *
++ * Arjan thinks the old way was overly complex, so it got simplified.
++ * Alan disagrees, saying that need the complexity to handle the weird
++ * nature of ISA shared interrupts. (This is a special exception.)
++ *
++ * In order to handle ISA shared interrupts properly, we need to check
++ * that all ports have been serviced, and therefore the ISA interrupt
++ * line has been de-asserted.
++ *
++ * This means we need to loop through all ports. checking that they
++ * don't have an interrupt pending.
++ */
++static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
++{
++ struct irq_info *i = dev_id;
++ struct list_head *l, *end = NULL;
++ int pass_counter = 0, handled = 0;
++
++ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
++
++ spin_lock(&i->lock);
++
++ l = i->head;
++ do {
++ struct uart_8250_port *up;
++ unsigned int iir;
++
++ up = list_entry(l, struct uart_8250_port, list);
++
++ iir = serial_in(up, UART_IIR);
++ if (!(iir & UART_IIR_NO_INT)) {
++ serial8250_handle_port(up);
++
++ handled = 1;
++
++ end = NULL;
++ } else if (end == NULL)
++ end = l;
++
++ l = l->next;
++
++ if (l == i->head && pass_counter++ > PASS_LIMIT) {
++ /* If we hit this, we're dead. */
++ printk(KERN_ERR "serial8250: too much work for "
++ "irq%d\n", irq);
++ break;
++ }
++ } while (l != end);
++
++ spin_unlock(&i->lock);
++
++ DEBUG_INTR("end.\n");
++
++ return IRQ_RETVAL(handled);
++}
++
++/*
++ * To support ISA shared interrupts, we need to have one interrupt
++ * handler that ensures that the IRQ line has been deasserted
++ * before returning. Failing to do this will result in the IRQ
++ * line being stuck active, and, since ISA irqs are edge triggered,
++ * no more IRQs will be seen.
++ */
++static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
++{
++ spin_lock_irq(&i->lock);
++
++ if (!list_empty(i->head)) {
++ if (i->head == &up->list)
++ i->head = i->head->next;
++ list_del(&up->list);
++ } else {
++ BUG_ON(i->head != &up->list);
++ i->head = NULL;
++ }
++
++ spin_unlock_irq(&i->lock);
++}
++
++static int serial_link_irq_chain(struct uart_8250_port *up)
++{
++ struct irq_info *i = irq_lists + up->port.irq;
++ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
++
++ spin_lock_irq(&i->lock);
++
++ if (i->head) {
++ list_add(&up->list, i->head);
++ spin_unlock_irq(&i->lock);
++
++ ret = 0;
++ } else {
++ INIT_LIST_HEAD(&up->list);
++ i->head = &up->list;
++ spin_unlock_irq(&i->lock);
++
++ ret = request_irq(up->port.irq, serial8250_interrupt,
++ irq_flags, "serial", i);
++ if (ret < 0)
++ serial_do_unlink(i, up);
++ }
++
++ return ret;
++}
++
++static void serial_unlink_irq_chain(struct uart_8250_port *up)
++{
++ struct irq_info *i = irq_lists + up->port.irq;
++
++ BUG_ON(i->head == NULL);
++
++ if (list_empty(i->head))
++ free_irq(up->port.irq, i);
++
++ serial_do_unlink(i, up);
++}
++
++/* Base timer interval for polling */
++static inline int poll_timeout(int timeout)
++{
++ return timeout > 6 ? (timeout / 2 - 2) : 1;
++}
++
++/*
++ * This function is used to handle ports that do not have an
++ * interrupt. This doesn't work very well for 16450's, but gives
++ * barely passable results for a 16550A. (Although at the expense
++ * of much CPU overhead).
++ */
++static void serial8250_timeout(unsigned long data)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)data;
++ unsigned int iir;
++
++ iir = serial_in(up, UART_IIR);
++ if (!(iir & UART_IIR_NO_INT))
++ serial8250_handle_port(up);
++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
++}
++
++static void serial8250_backup_timeout(unsigned long data)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)data;
++ unsigned int iir, ier = 0;
++
++ /*
++ * Must disable interrupts or else we risk racing with the interrupt
++ * based handler.
++ */
++ if (is_real_interrupt(up->port.irq)) {
++ ier = serial_in(up, UART_IER);
++ serial_out(up, UART_IER, 0);
++ }
++
++ iir = serial_in(up, UART_IIR);
++
++ /*
++ * This should be a safe test for anyone who doesn't trust the
++ * IIR bits on their UART, but it's specifically designed for
++ * the "Diva" UART used on the management processor on many HP
++ * ia64 and parisc boxes.
++ */
++ if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
++ (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
++ (serial_in(up, UART_LSR) & UART_LSR_THRE)) {
++ iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
++ iir |= UART_IIR_THRI;
++ }
++
++ if (!(iir & UART_IIR_NO_INT))
++ serial8250_handle_port(up);
++
++ if (is_real_interrupt(up->port.irq))
++ serial_out(up, UART_IER, ier);
++
++ /* Standard timer interval plus 0.2s to keep the port running */
++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5);
++}
++
++static unsigned int serial8250_tx_empty(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned long flags;
++ unsigned int ret;
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
++ spin_unlock_irqrestore(&up->port.lock, flags);
++
++ return ret;
++}
++
++static unsigned int serial8250_get_mctrl(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned int status;
++ unsigned int ret;
++
++ status = check_modem_status(up);
++
++ ret = 0;
++ if (status & UART_MSR_DCD)
++ ret |= TIOCM_CAR;
++ if (status & UART_MSR_RI)
++ ret |= TIOCM_RNG;
++ if (status & UART_MSR_DSR)
++ ret |= TIOCM_DSR;
++ if (status & UART_MSR_CTS)
++ ret |= TIOCM_CTS;
++ return ret;
++}
++
++static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned char mcr = 0;
++
++ if (mctrl & TIOCM_RTS)
++ mcr |= UART_MCR_RTS;
++ if (mctrl & TIOCM_DTR)
++ mcr |= UART_MCR_DTR;
++ if (mctrl & TIOCM_OUT1)
++ mcr |= UART_MCR_OUT1;
++ if (mctrl & TIOCM_OUT2)
++ mcr |= UART_MCR_OUT2;
++ if (mctrl & TIOCM_LOOP)
++ mcr |= UART_MCR_LOOP;
++
++ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
++
++ serial_out(up, UART_MCR, mcr);
++}
++
++static void serial8250_break_ctl(struct uart_port *port, int break_state)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned long flags;
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ if (break_state == -1)
++ up->lcr |= UART_LCR_SBC;
++ else
++ up->lcr &= ~UART_LCR_SBC;
++ serial_out(up, UART_LCR, up->lcr);
++ spin_unlock_irqrestore(&up->port.lock, flags);
++}
++
++#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
++
++/*
++ * Wait for transmitter & holding register to empty
++ */
++static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
++{
++ unsigned int status, tmout = 10000;
++
++ /* Wait up to 10ms for the character(s) to be sent. */
++ do {
++ status = serial_in(up, UART_LSR);
++
++ if (status & UART_LSR_BI)
++ up->lsr_break_flag = UART_LSR_BI;
++
++ if (--tmout == 0)
++ break;
++ udelay(1);
++ } while ((status & bits) != bits);
++
++ /* Wait up to 1s for flow control if necessary */
++ if (up->port.flags & UPF_CONS_FLOW) {
++ tmout = 1000000;
++ while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
++ udelay(1);
++ touch_nmi_watchdog();
++ }
++ }
++}
++
++static int serial8250_startup(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned long flags;
++ unsigned char lsr, iir;
++ int retval;
++
++ up->capabilities = uart_config[up->port.type].flags;
++ up->mcr = 0;
++
++ if (up->port.type == PORT_16C950) {
++ /* Wake up and initialize UART */
++ up->acr = 0;
++ serial_outp(up, UART_LCR, 0xBF);
++ serial_outp(up, UART_EFR, UART_EFR_ECB);
++ serial_outp(up, UART_IER, 0);
++ serial_outp(up, UART_LCR, 0);
++ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
++ serial_outp(up, UART_LCR, 0xBF);
++ serial_outp(up, UART_EFR, UART_EFR_ECB);
++ serial_outp(up, UART_LCR, 0);
++ }
++
++#ifdef CONFIG_SERIAL_8250_RSA
++ /*
++ * If this is an RSA port, see if we can kick it up to the
++ * higher speed clock.
++ */
++ enable_rsa(up);
++#endif
++
++ /*
++ * Clear the FIFO buffers and disable them.
++ * (they will be reenabled in set_termios())
++ */
++ serial8250_clear_fifos(up);
++
++ /*
++ * Clear the interrupt registers.
++ */
++ (void) serial_inp(up, UART_LSR);
++ (void) serial_inp(up, UART_RX);
++ (void) serial_inp(up, UART_IIR);
++ (void) serial_inp(up, UART_MSR);
++
++ /*
++ * At this point, there's no way the LSR could still be 0xff;
++ * if it is, then bail out, because there's likely no UART
++ * here.
++ */
++ if (!(up->port.flags & UPF_BUGGY_UART) &&
++ (serial_inp(up, UART_LSR) == 0xff)) {
++ printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
++ return -ENODEV;
++ }
++
++ /*
++ * For a XR16C850, we need to set the trigger levels
++ */
++ if (up->port.type == PORT_16850) {
++ unsigned char fctr;
++
++ serial_outp(up, UART_LCR, 0xbf);
++
++ fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
++ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
++ serial_outp(up, UART_TRG, UART_TRG_96);
++ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
++ serial_outp(up, UART_TRG, UART_TRG_96);
++
++ serial_outp(up, UART_LCR, 0);
++ }
++
++ if (is_real_interrupt(up->port.irq)) {
++ /*
++ * Test for UARTs that do not reassert THRE when the
++ * transmitter is idle and the interrupt has already
++ * been cleared. Real 16550s should always reassert
++ * this interrupt whenever the transmitter is idle and
++ * the interrupt is enabled. Delays are necessary to
++ * allow register changes to become visible.
++ */
++ spin_lock_irqsave(&up->port.lock, flags);
++
++ wait_for_xmitr(up, UART_LSR_THRE);
++ serial_out_sync(up, UART_IER, UART_IER_THRI);
++ udelay(1); /* allow THRE to set */
++ serial_in(up, UART_IIR);
++ serial_out(up, UART_IER, 0);
++ serial_out_sync(up, UART_IER, UART_IER_THRI);
++ udelay(1); /* allow a working UART time to re-assert THRE */
++ iir = serial_in(up, UART_IIR);
++ serial_out(up, UART_IER, 0);
++
++ spin_unlock_irqrestore(&up->port.lock, flags);
++
++ /*
++ * If the interrupt is not reasserted, setup a timer to
++ * kick the UART on a regular basis.
++ */
++ if (iir & UART_IIR_NO_INT) {
++ pr_debug("ttyS%d - using backup timer\n", port->line);
++ up->timer.function = serial8250_backup_timeout;
++ up->timer.data = (unsigned long)up;
++ mod_timer(&up->timer, jiffies +
++ poll_timeout(up->port.timeout) + HZ/5);
++ }
++ }
++
++ /*
++ * If the "interrupt" for this port doesn't correspond with any
++ * hardware interrupt, we use a timer-based system. The original
++ * driver used to do this with IRQ0.
++ */
++ if (!is_real_interrupt(up->port.irq)) {
++ up->timer.data = (unsigned long)up;
++ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
++ } else {
++ retval = serial_link_irq_chain(up);
++ if (retval)
++ return retval;
++ }
++
++ /*
++ * Now, initialize the UART
++ */
++ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ if (up->port.flags & UPF_FOURPORT) {
++ if (!is_real_interrupt(up->port.irq))
++ up->port.mctrl |= TIOCM_OUT1;
++ } else
++ /*
++ * Most PC uarts need OUT2 raised to enable interrupts.
++ */
++ if (is_real_interrupt(up->port.irq))
++ up->port.mctrl |= TIOCM_OUT2;
++
++ serial8250_set_mctrl(&up->port, up->port.mctrl);
++
++ /*
++ * Do a quick test to see if we receive an
++ * interrupt when we enable the TX irq.
++ */
++ serial_outp(up, UART_IER, UART_IER_THRI);
++ lsr = serial_in(up, UART_LSR);
++ iir = serial_in(up, UART_IIR);
++ serial_outp(up, UART_IER, 0);
++
++ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
++ if (!(up->bugs & UART_BUG_TXEN)) {
++ up->bugs |= UART_BUG_TXEN;
++ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
++ port->line);
++ }
++ } else {
++ up->bugs &= ~UART_BUG_TXEN;
++ }
++
++ spin_unlock_irqrestore(&up->port.lock, flags);
++
++ /*
++ * Finally, enable interrupts. Note: Modem status interrupts
++ * are set via set_termios(), which will be occurring imminently
++ * anyway, so we don't enable them here.
++ */
++ up->ier = UART_IER_RLSI | UART_IER_RDI;
++ serial_outp(up, UART_IER, up->ier);
++
++ if (up->port.flags & UPF_FOURPORT) {
++ unsigned int icp;
++ /*
++ * Enable interrupts on the AST Fourport board
++ */
++ icp = (up->port.iobase & 0xfe0) | 0x01f;
++ outb_p(0x80, icp);
++ (void) inb_p(icp);
++ }
++
++ /*
++ * And clear the interrupt registers again for luck.
++ */
++ (void) serial_inp(up, UART_LSR);
++ (void) serial_inp(up, UART_RX);
++ (void) serial_inp(up, UART_IIR);
++ (void) serial_inp(up, UART_MSR);
++
++ return 0;
++}
++
++static void serial8250_shutdown(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned long flags;
++
++ /*
++ * Disable interrupts from this port
++ */
++ up->ier = 0;
++ serial_outp(up, UART_IER, 0);
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ if (up->port.flags & UPF_FOURPORT) {
++ /* reset interrupts on the AST Fourport board */
++ inb((up->port.iobase & 0xfe0) | 0x1f);
++ up->port.mctrl |= TIOCM_OUT1;
++ } else
++ up->port.mctrl &= ~TIOCM_OUT2;
++
++ serial8250_set_mctrl(&up->port, up->port.mctrl);
++ spin_unlock_irqrestore(&up->port.lock, flags);
++
++ /*
++ * Disable break condition and FIFOs
++ */
++ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
++ serial8250_clear_fifos(up);
++
++#ifdef CONFIG_SERIAL_8250_RSA
++ /*
++ * Reset the RSA board back to 115kbps compat mode.
++ */
++ disable_rsa(up);
++#endif
++
++ /*
++ * Read data port to reset things, and then unlink from
++ * the IRQ chain.
++ */
++ (void) serial_in(up, UART_RX);
++
++ del_timer_sync(&up->timer);
++ up->timer.function = serial8250_timeout;
++ if (is_real_interrupt(up->port.irq))
++ serial_unlink_irq_chain(up);
++}
++
++static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
++{
++ unsigned int quot;
++
++ /*
++ * Handle magic divisors for baud rates above baud_base on
++ * SMSC SuperIO chips.
++ */
++ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
++ baud == (port->uartclk/4))
++ quot = 0x8001;
++ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
++ baud == (port->uartclk/8))
++ quot = 0x8002;
++ else
++ quot = uart_get_divisor(port, baud);
++
++ return quot;
++}
++
++static void
++serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ unsigned char cval, fcr = 0;
++ unsigned long flags;
++ unsigned int baud, quot;
++
++ switch (termios->c_cflag & CSIZE) {
++ case CS5:
++ cval = UART_LCR_WLEN5;
++ break;
++ case CS6:
++ cval = UART_LCR_WLEN6;
++ break;
++ case CS7:
++ cval = UART_LCR_WLEN7;
++ break;
++ default:
++ case CS8:
++ cval = UART_LCR_WLEN8;
++ break;
++ }
++
++ if (termios->c_cflag & CSTOPB)
++ cval |= UART_LCR_STOP;
++ if (termios->c_cflag & PARENB)
++ cval |= UART_LCR_PARITY;
++ if (!(termios->c_cflag & PARODD))
++ cval |= UART_LCR_EPAR;
++#ifdef CMSPAR
++ if (termios->c_cflag & CMSPAR)
++ cval |= UART_LCR_SPAR;
++#endif
++
++ /*
++ * Ask the core to calculate the divisor for us.
++ */
++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++ quot = serial8250_get_divisor(port, baud);
++
++ /*
++ * Oxford Semi 952 rev B workaround
++ */
++ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
++ quot ++;
++
++ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
++ if (baud < 2400)
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
++ else
++ fcr = uart_config[up->port.type].fcr;
++ }
++
++ /*
++ * MCR-based auto flow control. When AFE is enabled, RTS will be
++ * deasserted when the receive FIFO contains more characters than
++ * the trigger, or the MCR RTS bit is cleared. In the case where
++ * the remote UART is not using CTS auto flow control, we must
++ * have sufficient FIFO entries for the latency of the remote
++ * UART to respond. IOW, at least 32 bytes of FIFO.
++ */
++ if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
++ up->mcr &= ~UART_MCR_AFE;
++ if (termios->c_cflag & CRTSCTS)
++ up->mcr |= UART_MCR_AFE;
++ }
++
++ /*
++ * Ok, we're now changing the port state. Do it with
++ * interrupts disabled.
++ */
++ spin_lock_irqsave(&up->port.lock, flags);
++
++ /*
++ * Update the per-port timeout.
++ */
++ uart_update_timeout(port, termios->c_cflag, baud);
++
++ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
++ if (termios->c_iflag & INPCK)
++ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & (BRKINT | PARMRK))
++ up->port.read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characteres to ignore
++ */
++ up->port.ignore_status_mask = 0;
++ if (termios->c_iflag & IGNPAR)
++ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
++ if (termios->c_iflag & IGNBRK) {
++ up->port.ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns too (for real raw support).
++ */
++ if (termios->c_iflag & IGNPAR)
++ up->port.ignore_status_mask |= UART_LSR_OE;
++ }
++
++ /*
++ * ignore all characters if CREAD is not set
++ */
++ if ((termios->c_cflag & CREAD) == 0)
++ up->port.ignore_status_mask |= UART_LSR_DR;
++
++ /*
++ * CTS flow control flag and modem status interrupts
++ */
++ up->ier &= ~UART_IER_MSI;
++ if (!(up->bugs & UART_BUG_NOMSR) &&
++ UART_ENABLE_MS(&up->port, termios->c_cflag))
++ up->ier |= UART_IER_MSI;
++ if (up->capabilities & UART_CAP_UUE)
++ up->ier |= UART_IER_UUE | UART_IER_RTOIE;
++
++ serial_out(up, UART_IER, up->ier);
++
++ if (up->capabilities & UART_CAP_EFR) {
++ unsigned char efr = 0;
++ /*
++ * TI16C752/Startech hardware flow control. FIXME:
++ * - TI16C752 requires control thresholds to be set.
++ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
++ */
++ if (termios->c_cflag & CRTSCTS)
++ efr |= UART_EFR_CTS;
++
++ serial_outp(up, UART_LCR, 0xBF);
++ serial_outp(up, UART_EFR, efr);
++ }
++
++#ifdef CONFIG_ARCH_OMAP15XX
++ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
++ if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
++ if (baud == 115200) {
++ quot = 1;
++ serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
++ } else
++ serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
++ }
++#endif
++
++ if (up->capabilities & UART_NATSEMI) {
++ /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
++ serial_outp(up, UART_LCR, 0xe0);
++ } else {
++ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
++ }
++
++ serial_dl_write(up, quot);
++
++ /*
++ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
++ * is written without DLAB set, this mode will be disabled.
++ */
++ if (up->port.type == PORT_16750)
++ serial_outp(up, UART_FCR, fcr);
++
++ serial_outp(up, UART_LCR, cval); /* reset DLAB */
++ up->lcr = cval; /* Save LCR */
++ if (up->port.type != PORT_16750) {
++ if (fcr & UART_FCR_ENABLE_FIFO) {
++ /* emulated UARTs (Lucent Venus 167x) need two steps */
++ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
++ }
++ serial_outp(up, UART_FCR, fcr); /* set fcr */
++ }
++ serial8250_set_mctrl(&up->port, up->port.mctrl);
++ spin_unlock_irqrestore(&up->port.lock, flags);
++}
++
++static void
++serial8250_pm(struct uart_port *port, unsigned int state,
++ unsigned int oldstate)
++{
++ struct uart_8250_port *p = (struct uart_8250_port *)port;
++
++ serial8250_set_sleep(p, state != 0);
++
++ if (p->pm)
++ p->pm(port, state, oldstate);
++}
++
++/*
++ * Resource handling.
++ */
++static int serial8250_request_std_resource(struct uart_8250_port *up)
++{
++ unsigned int size = 8 << up->port.regshift;
++ int ret = 0;
++
++ switch (up->port.iotype) {
++ case UPIO_AU:
++ size = 0x100000;
++ /* fall thru */
++ case UPIO_TSI:
++ case UPIO_MEM32:
++ case UPIO_MEM:
++ if (!up->port.mapbase)
++ break;
++
++ if (!request_mem_region(up->port.mapbase, size, "serial")) {
++ ret = -EBUSY;
++ break;
++ }
++
++ if (up->port.flags & UPF_IOREMAP) {
++ up->port.membase = ioremap(up->port.mapbase, size);
++ if (!up->port.membase) {
++ release_mem_region(up->port.mapbase, size);
++ ret = -ENOMEM;
++ }
++ }
++ break;
++
++ case UPIO_HUB6:
++ case UPIO_PORT:
++ if (!request_region(up->port.iobase, size, "serial"))
++ ret = -EBUSY;
++ break;
++ }
++ return ret;
++}
++
++static void serial8250_release_std_resource(struct uart_8250_port *up)
++{
++ unsigned int size = 8 << up->port.regshift;
++
++ switch (up->port.iotype) {
++ case UPIO_AU:
++ size = 0x100000;
++ /* fall thru */
++ case UPIO_TSI:
++ case UPIO_MEM32:
++ case UPIO_MEM:
++ if (!up->port.mapbase)
++ break;
++
++ if (up->port.flags & UPF_IOREMAP) {
++ iounmap(up->port.membase);
++ up->port.membase = NULL;
++ }
++
++ release_mem_region(up->port.mapbase, size);
++ break;
++
++ case UPIO_HUB6:
++ case UPIO_PORT:
++ release_region(up->port.iobase, size);
++ break;
++ }
++}
++
++static int serial8250_request_rsa_resource(struct uart_8250_port *up)
++{
++ unsigned long start = UART_RSA_BASE << up->port.regshift;
++ unsigned int size = 8 << up->port.regshift;
++ int ret = -EINVAL;
++
++ switch (up->port.iotype) {
++ case UPIO_HUB6:
++ case UPIO_PORT:
++ start += up->port.iobase;
++ if (request_region(start, size, "serial-rsa"))
++ ret = 0;
++ else
++ ret = -EBUSY;
++ break;
++ }
++
++ return ret;
++}
++
++static void serial8250_release_rsa_resource(struct uart_8250_port *up)
++{
++ unsigned long offset = UART_RSA_BASE << up->port.regshift;
++ unsigned int size = 8 << up->port.regshift;
++
++ switch (up->port.iotype) {
++ case UPIO_HUB6:
++ case UPIO_PORT:
++ release_region(up->port.iobase + offset, size);
++ break;
++ }
++}
++
++static void serial8250_release_port(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ serial8250_release_std_resource(up);
++ if (up->port.type == PORT_RSA)
++ serial8250_release_rsa_resource(up);
++}
++
++static int serial8250_request_port(struct uart_port *port)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ int ret = 0;
++
++ ret = serial8250_request_std_resource(up);
++ if (ret == 0 && up->port.type == PORT_RSA) {
++ ret = serial8250_request_rsa_resource(up);
++ if (ret < 0)
++ serial8250_release_std_resource(up);
++ }
++
++ return ret;
++}
++
++static void serial8250_config_port(struct uart_port *port, int flags)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++ int probeflags = PROBE_ANY;
++ int ret;
++
++ /*
++ * Find the region that we can probe for. This in turn
++ * tells us whether we can probe for the type of port.
++ */
++ ret = serial8250_request_std_resource(up);
++ if (ret < 0)
++ return;
++
++ ret = serial8250_request_rsa_resource(up);
++ if (ret < 0)
++ probeflags &= ~PROBE_RSA;
++
++ if (flags & UART_CONFIG_TYPE)
++ autoconfig(up, probeflags);
++ if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
++ autoconfig_irq(up);
++
++ if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
++ serial8250_release_rsa_resource(up);
++ if (up->port.type == PORT_UNKNOWN)
++ serial8250_release_std_resource(up);
++}
++
++static int
++serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
++ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
++ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
++ ser->type == PORT_STARTECH)
++ return -EINVAL;
++ return 0;
++}
++
++static const char *
++serial8250_type(struct uart_port *port)
++{
++ int type = port->type;
++
++ if (type >= ARRAY_SIZE(uart_config))
++ type = 0;
++ return uart_config[type].name;
++}
++
++static struct uart_ops serial8250_pops = {
++ .tx_empty = serial8250_tx_empty,
++ .set_mctrl = serial8250_set_mctrl,
++ .get_mctrl = serial8250_get_mctrl,
++ .stop_tx = serial8250_stop_tx,
++ .start_tx = serial8250_start_tx,
++ .stop_rx = serial8250_stop_rx,
++ .enable_ms = serial8250_enable_ms,
++ .break_ctl = serial8250_break_ctl,
++ .startup = serial8250_startup,
++ .shutdown = serial8250_shutdown,
++ .set_termios = serial8250_set_termios,
++ .pm = serial8250_pm,
++ .type = serial8250_type,
++ .release_port = serial8250_release_port,
++ .request_port = serial8250_request_port,
++ .config_port = serial8250_config_port,
++ .verify_port = serial8250_verify_port,
++};
++
++static struct uart_8250_port serial8250_ports[UART_NR];
++
++static void __init serial8250_isa_init_ports(void)
++{
++ struct uart_8250_port *up;
++ static int first = 1;
++ int i;
++
++ if (!first)
++ return;
++ first = 0;
++
++ for (i = 0; i < nr_uarts; i++) {
++ struct uart_8250_port *up = &serial8250_ports[i];
++
++ up->port.line = i;
++ spin_lock_init(&up->port.lock);
++
++ init_timer(&up->timer);
++ up->timer.function = serial8250_timeout;
++
++ /*
++ * ALPHA_KLUDGE_MCR needs to be killed.
++ */
++ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
++ up->mcr_force = ALPHA_KLUDGE_MCR;
++
++ up->port.ops = &serial8250_pops;
++ }
++
++ for (i = 0, up = serial8250_ports;
++ i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
++ i++, up++) {
++ up->port.iobase = old_serial_port[i].port;
++ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
++ up->port.uartclk = old_serial_port[i].baud_base * 16;
++ up->port.flags = old_serial_port[i].flags;
++ up->port.hub6 = old_serial_port[i].hub6;
++ up->port.membase = old_serial_port[i].iomem_base;
++ up->port.iotype = old_serial_port[i].io_type;
++ up->port.regshift = old_serial_port[i].iomem_reg_shift;
++ if (share_irqs)
++ up->port.flags |= UPF_SHARE_IRQ;
++ }
++}
++
++static void __init
++serial8250_register_ports(struct uart_driver *drv, struct device *dev)
++{
++ int i;
++
++ serial8250_isa_init_ports();
++
++ for (i = 0; i < nr_uarts; i++) {
++ struct uart_8250_port *up = &serial8250_ports[i];
++
++ up->port.dev = dev;
++ uart_add_one_port(drv, &up->port);
++ }
++}
++
++#ifdef CONFIG_SERIAL_8250_CONSOLE
++
++static void serial8250_console_putchar(struct uart_port *port, int ch)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)port;
++
++ wait_for_xmitr(up, UART_LSR_THRE);
++ serial_out(up, UART_TX, ch);
++}
++
++/*
++ * Print a string to the serial port trying not to disturb
++ * any possible real use of the port...
++ *
++ * The console_lock must be held when we get here.
++ */
++static void
++serial8250_console_write(struct console *co, const char *s, unsigned int count)
++{
++ struct uart_8250_port *up = &serial8250_ports[co->index];
++ unsigned long flags;
++ unsigned int ier;
++ int locked = 1;
++
++ touch_nmi_watchdog();
++
++ local_irq_save(flags);
++ if (up->port.sysrq) {
++ /* serial8250_handle_port() already took the lock */
++ locked = 0;
++ } else if (oops_in_progress) {
++ locked = spin_trylock(&up->port.lock);
++ } else
++ spin_lock(&up->port.lock);
++
++ /*
++ * First save the IER then disable the interrupts
++ */
++ ier = serial_in(up, UART_IER);
++
++ if (up->capabilities & UART_CAP_UUE)
++ serial_out(up, UART_IER, UART_IER_UUE);
++ else
++ serial_out(up, UART_IER, 0);
++
++ uart_console_write(&up->port, s, count, serial8250_console_putchar);
++
++ /*
++ * Finally, wait for transmitter to become empty
++ * and restore the IER
++ */
++ wait_for_xmitr(up, BOTH_EMPTY);
++ serial_out(up, UART_IER, ier);
++
++ if (locked)
++ spin_unlock(&up->port.lock);
++ local_irq_restore(flags);
++}
++
++static int __init serial8250_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 9600;
++ int bits = 8;
++ int parity = 'n';
++ int flow = 'n';
++
++ /*
++ * Check whether an invalid uart number has been specified, and
++ * if so, search for the first available port that does have
++ * console support.
++ */
++ if (co->index >= nr_uarts)
++ co->index = 0;
++ port = &serial8250_ports[co->index].port;
++ if (!port->iobase && !port->membase)
++ return -ENODEV;
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct uart_driver serial8250_reg;
++static struct console serial8250_console = {
++ .name = "ttyS",
++ .write = serial8250_console_write,
++ .device = uart_console_device,
++ .setup = serial8250_console_setup,
++ .flags = CON_PRINTBUFFER,
++ .index = -1,
++ .data = &serial8250_reg,
++};
++
++static int __init serial8250_console_init(void)
++{
++ serial8250_isa_init_ports();
++ register_console(&serial8250_console);
++ return 0;
++}
++console_initcall(serial8250_console_init);
++
++static int __init find_port(struct uart_port *p)
++{
++ int line;
++ struct uart_port *port;
++
++ for (line = 0; line < nr_uarts; line++) {
++ port = &serial8250_ports[line].port;
++ if (uart_match_port(p, port))
++ return line;
++ }
++ return -ENODEV;
++}
++
++int __init serial8250_start_console(struct uart_port *port, char *options)
++{
++ int line;
++
++ line = find_port(port);
++ if (line < 0)
++ return -ENODEV;
++
++ add_preferred_console("ttyS", line, options);
++ printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
++ line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
++ port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
++ (unsigned long) port->iobase, options);
++ if (!(serial8250_console.flags & CON_ENABLED)) {
++ serial8250_console.flags &= ~CON_PRINTBUFFER;
++ register_console(&serial8250_console);
++ }
++ return line;
++}
++
++#define SERIAL8250_CONSOLE &serial8250_console
++#else
++#define SERIAL8250_CONSOLE NULL
++#endif
++
++static struct uart_driver serial8250_reg = {
++ .owner = THIS_MODULE,
++ .driver_name = "serial",
++ .dev_name = "ttyS",
++ .major = TTY_MAJOR,
++ .minor = 64,
++ .nr = UART_NR,
++ .cons = SERIAL8250_CONSOLE,
++};
++
++/*
++ * early_serial_setup - early registration for 8250 ports
++ *
++ * Setup an 8250 port structure prior to console initialisation. Use
++ * after console initialisation will cause undefined behaviour.
++ */
++int __init early_serial_setup(struct uart_port *port)
++{
++ if (port->line >= ARRAY_SIZE(serial8250_ports))
++ return -ENODEV;
++
++ serial8250_isa_init_ports();
++ serial8250_ports[port->line].port = *port;
++ serial8250_ports[port->line].port.ops = &serial8250_pops;
++ return 0;
++}
++
++/**
++ * serial8250_suspend_port - suspend one serial port
++ * @line: serial line number
++ *
++ * Suspend one serial port.
++ */
++void serial8250_suspend_port(int line)
++{
++ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
++}
++
++/**
++ * serial8250_resume_port - resume one serial port
++ * @line: serial line number
++ *
++ * Resume one serial port.
++ */
++void serial8250_resume_port(int line)
++{
++ uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
++}
++
++/*
++ * Register a set of serial devices attached to a platform device. The
++ * list is terminated with a zero flags entry, which means we expect
++ * all entries to have at least UPF_BOOT_AUTOCONF set.
++ */
++static int __devinit serial8250_probe(struct platform_device *dev)
++{
++ struct plat_serial8250_port *p = dev->dev.platform_data;
++ struct uart_port port;
++ int ret, i;
++
++ memset(&port, 0, sizeof(struct uart_port));
++
++ for (i = 0; p && p->flags != 0; p++, i++) {
++ port.iobase = p->iobase;
++ port.membase = p->membase;
++ port.irq = p->irq;
++ port.uartclk = p->uartclk;
++ port.regshift = p->regshift;
++ port.iotype = p->iotype;
++ port.flags = p->flags;
++ port.mapbase = p->mapbase;
++ port.hub6 = p->hub6;
++ port.dev = &dev->dev;
++ if (share_irqs)
++ port.flags |= UPF_SHARE_IRQ;
++ ret = serial8250_register_port(&port);
++ if (ret < 0) {
++ dev_err(&dev->dev, "unable to register port at index %d "
++ "(IO%lx MEM%lx IRQ%d): %d\n", i,
++ p->iobase, p->mapbase, p->irq, ret);
++ }
++ }
++ return 0;
++}
++
++/*
++ * Remove serial ports registered against a platform device.
++ */
++static int __devexit serial8250_remove(struct platform_device *dev)
++{
++ int i;
++
++ for (i = 0; i < nr_uarts; i++) {
++ struct uart_8250_port *up = &serial8250_ports[i];
++
++ if (up->port.dev == &dev->dev)
++ serial8250_unregister_port(i);
++ }
++ return 0;
++}
++
++static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
++{
++ int i;
++
++ for (i = 0; i < UART_NR; i++) {
++ struct uart_8250_port *up = &serial8250_ports[i];
++
++ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
++ uart_suspend_port(&serial8250_reg, &up->port);
++ }
++
++ return 0;
++}
++
++static int serial8250_resume(struct platform_device *dev)
++{
++ int i;
++
++ for (i = 0; i < UART_NR; i++) {
++ struct uart_8250_port *up = &serial8250_ports[i];
++
++ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
++ uart_resume_port(&serial8250_reg, &up->port);
++ }
++
++ return 0;
++}
++
++static struct platform_driver serial8250_isa_driver = {
++ .probe = serial8250_probe,
++ .remove = __devexit_p(serial8250_remove),
++ .suspend = serial8250_suspend,
++ .resume = serial8250_resume,
++ .driver = {
++ .name = "serial8250",
++ .owner = THIS_MODULE,
++ },
++};
++
++/*
++ * This "device" covers _all_ ISA 8250-compatible serial devices listed
++ * in the table in include/asm/serial.h
++ */
++static struct platform_device *serial8250_isa_devs;
++
++/*
++ * serial8250_register_port and serial8250_unregister_port allows for
++ * 16x50 serial ports to be configured at run-time, to support PCMCIA
++ * modems and PCI multiport cards.
++ */
++static DEFINE_MUTEX(serial_mutex);
++
++static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
++{
++ int i;
++
++ /*
++ * First, find a port entry which matches.
++ */
++ for (i = 0; i < nr_uarts; i++)
++ if (uart_match_port(&serial8250_ports[i].port, port))
++ return &serial8250_ports[i];
++
++ /*
++ * We didn't find a matching entry, so look for the first
++ * free entry. We look for one which hasn't been previously
++ * used (indicated by zero iobase).
++ */
++ for (i = 0; i < nr_uarts; i++)
++ if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
++ serial8250_ports[i].port.iobase == 0)
++ return &serial8250_ports[i];
++
++ /*
++ * That also failed. Last resort is to find any entry which
++ * doesn't have a real port associated with it.
++ */
++ for (i = 0; i < nr_uarts; i++)
++ if (serial8250_ports[i].port.type == PORT_UNKNOWN)
++ return &serial8250_ports[i];
++
++ return NULL;
++}
++
++/**
++ * serial8250_register_port - register a serial port
++ * @port: serial port template
++ *
++ * Configure the serial port specified by the request. If the
++ * port exists and is in use, it is hung up and unregistered
++ * first.
++ *
++ * The port is then probed and if necessary the IRQ is autodetected
++ * If this fails an error is returned.
++ *
++ * On success the port is ready to use and the line number is returned.
++ */
++int serial8250_register_port(struct uart_port *port)
++{
++ struct uart_8250_port *uart;
++ int ret = -ENOSPC;
++
++ if (port->uartclk == 0)
++ return -EINVAL;
++
++ mutex_lock(&serial_mutex);
++
++ uart = serial8250_find_match_or_unused(port);
++ if (uart) {
++ uart_remove_one_port(&serial8250_reg, &uart->port);
++
++ uart->port.iobase = port->iobase;
++ uart->port.membase = port->membase;
++ uart->port.irq = port->irq;
++ uart->port.uartclk = port->uartclk;
++ uart->port.fifosize = port->fifosize;
++ uart->port.regshift = port->regshift;
++ uart->port.iotype = port->iotype;
++ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
++ uart->port.mapbase = port->mapbase;
++ if (port->dev)
++ uart->port.dev = port->dev;
++
++ ret = uart_add_one_port(&serial8250_reg, &uart->port);
++ if (ret == 0)
++ ret = uart->port.line;
++ }
++ mutex_unlock(&serial_mutex);
++
++ return ret;
++}
++EXPORT_SYMBOL(serial8250_register_port);
++
++/**
++ * serial8250_unregister_port - remove a 16x50 serial port at runtime
++ * @line: serial line number
++ *
++ * Remove one serial port. This may not be called from interrupt
++ * context. We hand the port back to the our control.
++ */
++void serial8250_unregister_port(int line)
++{
++ struct uart_8250_port *uart = &serial8250_ports[line];
++
++ mutex_lock(&serial_mutex);
++ uart_remove_one_port(&serial8250_reg, &uart->port);
++ if (serial8250_isa_devs) {
++ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
++ uart->port.type = PORT_UNKNOWN;
++ uart->port.dev = &serial8250_isa_devs->dev;
++ uart_add_one_port(&serial8250_reg, &uart->port);
++ } else {
++ uart->port.dev = NULL;
++ }
++ mutex_unlock(&serial_mutex);
++}
++EXPORT_SYMBOL(serial8250_unregister_port);
++
++static int __init serial8250_init(void)
++{
++ int ret, i;
++
++ if (nr_uarts > UART_NR)
++ nr_uarts = UART_NR;
++
++ printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
++ "%d ports, IRQ sharing %sabled\n", nr_uarts,
++ share_irqs ? "en" : "dis");
++
++ for (i = 0; i < NR_IRQS; i++)
++ spin_lock_init(&irq_lists[i].lock);
++
++ ret = uart_register_driver(&serial8250_reg);
++ if (ret)
++ goto out;
++
++ serial8250_isa_devs = platform_device_alloc("serial8250",
++ PLAT8250_DEV_LEGACY);
++ if (!serial8250_isa_devs) {
++ ret = -ENOMEM;
++ goto unreg_uart_drv;
++ }
++
++ ret = platform_device_add(serial8250_isa_devs);
++ if (ret)
++ goto put_dev;
++
++ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
++
++ ret = platform_driver_register(&serial8250_isa_driver);
++ if (ret == 0)
++ goto out;
++
++ platform_device_del(serial8250_isa_devs);
++ put_dev:
++ platform_device_put(serial8250_isa_devs);
++ unreg_uart_drv:
++ uart_unregister_driver(&serial8250_reg);
++ out:
++ return ret;
++}
++
++static void __exit serial8250_exit(void)
++{
++ struct platform_device *isa_dev = serial8250_isa_devs;
++
++ /*
++ * This tells serial8250_unregister_port() not to re-register
++ * the ports (thereby making serial8250_isa_driver permanently
++ * in use.)
++ */
++ serial8250_isa_devs = NULL;
++
++ platform_driver_unregister(&serial8250_isa_driver);
++ platform_device_unregister(isa_dev);
++
++ uart_unregister_driver(&serial8250_reg);
++}
++
++module_init(serial8250_init);
++module_exit(serial8250_exit);
++
++EXPORT_SYMBOL(serial8250_suspend_port);
++EXPORT_SYMBOL(serial8250_resume_port);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
++
++module_param(share_irqs, uint, 0644);
++MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
++ " (unsafe)");
++
++module_param(nr_uarts, uint, 0644);
++MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
++
++#ifdef CONFIG_SERIAL_8250_RSA
++module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
++MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
++#endif
++MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h linux-2.6.21.1-owrt/drivers/usb/host/ehci.h
+--- linux-2.6.21.1/drivers/usb/host/ehci.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h 2007-05-23 23:37:18.000000000 +0200
+@@ -87,6 +87,7 @@
+ struct dma_pool *sitd_pool; /* sitd per split iso urb */
+
+ struct timer_list watchdog;
++ struct timer_list softirq;
+ unsigned long actions;
+ unsigned stamp;
+ unsigned long next_statechange;
+diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c
+--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c 2007-05-23 23:37:18.000000000 +0200
+@@ -118,6 +118,7 @@
+ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
+ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
+ #define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
++#define EHCI_SOFTIRQ (HZ/400)
+
+ /* Initial IRQ latency: faster than hw default */
+ static int log2_irq_thresh = 0; // 0 to 6
+@@ -273,6 +274,16 @@
+ #include "ehci-sched.c"
+
+ /*-------------------------------------------------------------------------*/
++static irqreturn_t ehci_irq (struct usb_hcd *hcd);
++
++static void ehci_softirq (unsigned long param)
++{
++ struct ehci_hcd *ehci = (struct ehci_hcd *) param;
++
++ if (ehci_irq(ehci_to_hcd(ehci)) != IRQ_NONE)
++ set_bit(HCD_FLAG_SAW_IRQ, &(ehci_to_hcd(ehci))->flags);
++ mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
++}
+
+ static void ehci_watchdog (unsigned long param)
+ {
+@@ -289,6 +300,10 @@
+ COUNT (ehci->stats.lost_iaa);
+ ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+ ehci->reclaim_ready = 1;
++ if (!timer_pending(&ehci->softirq)) {
++ ehci_info(ehci, "switching to softirq\n");
++ mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
++ }
+ }
+ }
+
+@@ -396,6 +411,7 @@
+
+ /* no more interrupts ... */
+ del_timer_sync (&ehci->watchdog);
++ del_timer_sync (&ehci->softirq);
+
+ spin_lock_irq(&ehci->lock);
+ if (HC_IS_RUNNING (hcd->state))
+@@ -444,6 +460,10 @@
+ ehci->watchdog.function = ehci_watchdog;
+ ehci->watchdog.data = (unsigned long) ehci;
+
++ init_timer(&ehci->softirq);
++ ehci->softirq.function = ehci_softirq;
++ ehci->softirq.data = (unsigned long) ehci;
++
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig
+--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,1008 @@
++/*
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/dmapool.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/reboot.h>
++#include <linux/usb.h>
++#include <linux/moduleparam.h>
++#include <linux/dma-mapping.h>
++
++#include "../core/hcd.h"
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++#ifdef CONFIG_PPC_PS3
++#include <asm/firmware.h>
++#endif
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * EHCI hc_driver implementation ... experimental, incomplete.
++ * Based on the final 1.0 register interface specification.
++ *
++ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
++ * First was PCMCIA, like ISA; then CardBus, which is PCI.
++ * Next comes "CardBay", using USB 2.0 signals.
++ *
++ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
++ * Special thanks to Intel and VIA for providing host controllers to
++ * test this driver on, and Cypress (including In-System Design) for
++ * providing early devices for those host controllers to talk to!
++ *
++ * HISTORY:
++ *
++ * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db)
++ * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net)
++ * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka,
++ * <sojkam@centrum.cz>, updates by DB).
++ *
++ * 2002-11-29 Correct handling for hw async_next register.
++ * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared;
++ * only scheduling is different, no arbitrary limitations.
++ * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support,
++ * clean up HC run state handshaking.
++ * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts
++ * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other
++ * missing pieces: enabling 64bit dma, handoff from BIOS/SMM.
++ * 2002-05-07 Some error path cleanups to report better errors; wmb();
++ * use non-CVS version id; better iso bandwidth claim.
++ * 2002-04-19 Control/bulk/interrupt submit no longer uses giveback() on
++ * errors in submit path. Bugfixes to interrupt scheduling/processing.
++ * 2002-03-05 Initial high-speed ISO support; reduce ITD memory; shift
++ * more checking to generic hcd framework (db). Make it work with
++ * Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt).
++ * 2002-01-14 Minor cleanup; version synch.
++ * 2002-01-08 Fix roothub handoff of FS/LS to companion controllers.
++ * 2002-01-04 Control/Bulk queuing behaves.
++ *
++ * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
++ * 2001-June Works with usb-storage and NEC EHCI on 2.4
++ */
++
++#define DRIVER_VERSION "10 Dec 2004"
++#define DRIVER_AUTHOR "David Brownell"
++#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
++
++static const char hcd_name [] = "ehci_hcd";
++
++
++#undef EHCI_VERBOSE_DEBUG
++#undef EHCI_URB_TRACE
++
++#ifdef DEBUG
++#define EHCI_STATS
++#endif
++
++/* magic numbers that can affect system performance */
++#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
++#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
++#define EHCI_TUNE_RL_TT 0
++#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
++#define EHCI_TUNE_MULT_TT 1
++#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
++
++#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */
++#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
++#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
++#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
++
++/* Initial IRQ latency: faster than hw default */
++static int log2_irq_thresh = 0; // 0 to 6
++module_param (log2_irq_thresh, int, S_IRUGO);
++MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
++
++/* initial park setting: slower than hw default */
++static unsigned park = 0;
++module_param (park, uint, S_IRUGO);
++MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
++
++/* for flakey hardware, ignore overcurrent indicators */
++static int ignore_oc = 0;
++module_param (ignore_oc, bool, S_IRUGO);
++MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
++
++#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
++
++/*-------------------------------------------------------------------------*/
++
++#include "ehci.h"
++#include "ehci-dbg.c"
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * handshake - spin reading hc until handshake completes or fails
++ * @ptr: address of hc register to be read
++ * @mask: bits to look at in result of read
++ * @done: value of those bits when handshake succeeds
++ * @usec: timeout in microseconds
++ *
++ * Returns negative errno, or zero on success
++ *
++ * Success happens when the "mask" bits have the specified value (hardware
++ * handshake done). There are two failure modes: "usec" have passed (major
++ * hardware flakeout), or the register reads as all-ones (hardware removed).
++ *
++ * That last failure should_only happen in cases like physical cardbus eject
++ * before driver shutdown. But it also seems to be caused by bugs in cardbus
++ * bridge shutdown: shutting down the bridge before the devices using it.
++ */
++static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
++ u32 mask, u32 done, int usec)
++{
++ u32 result;
++
++ do {
++ result = ehci_readl(ehci, ptr);
++ if (result == ~(u32)0) /* card removed */
++ return -ENODEV;
++ result &= mask;
++ if (result == done)
++ return 0;
++ udelay (1);
++ usec--;
++ } while (usec > 0);
++ return -ETIMEDOUT;
++}
++
++/* force HC to halt state from unknown (EHCI spec section 2.3) */
++static int ehci_halt (struct ehci_hcd *ehci)
++{
++ u32 temp = ehci_readl(ehci, &ehci->regs->status);
++
++ /* disable any irqs left enabled by previous code */
++ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
++
++ if ((temp & STS_HALT) != 0)
++ return 0;
++
++ temp = ehci_readl(ehci, &ehci->regs->command);
++ temp &= ~CMD_RUN;
++ ehci_writel(ehci, temp, &ehci->regs->command);
++ return handshake (ehci, &ehci->regs->status,
++ STS_HALT, STS_HALT, 16 * 125);
++}
++
++/* put TDI/ARC silicon into EHCI mode */
++static void tdi_reset (struct ehci_hcd *ehci)
++{
++ u32 __iomem *reg_ptr;
++ u32 tmp;
++
++ reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68);
++ tmp = ehci_readl(ehci, reg_ptr);
++ tmp |= 0x3;
++ ehci_writel(ehci, tmp, reg_ptr);
++}
++
++/* reset a non-running (STS_HALT == 1) controller */
++static int ehci_reset (struct ehci_hcd *ehci)
++{
++ int retval;
++ u32 command = ehci_readl(ehci, &ehci->regs->command);
++
++ command |= CMD_RESET;
++ dbg_cmd (ehci, "reset", command);
++ ehci_writel(ehci, command, &ehci->regs->command);
++ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
++ ehci->next_statechange = jiffies;
++ retval = handshake (ehci, &ehci->regs->command,
++ CMD_RESET, 0, 250 * 1000);
++
++ if (retval)
++ return retval;
++
++ if (ehci_is_TDI(ehci))
++ tdi_reset (ehci);
++
++ return retval;
++}
++
++/* idle the controller (from running) */
++static void ehci_quiesce (struct ehci_hcd *ehci)
++{
++ u32 temp;
++
++#ifdef DEBUG
++ if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
++ BUG ();
++#endif
++
++ /* wait for any schedule enables/disables to take effect */
++ temp = ehci_readl(ehci, &ehci->regs->command) << 10;
++ temp &= STS_ASS | STS_PSS;
++ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
++ temp, 16 * 125) != 0) {
++ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
++ return;
++ }
++
++ /* then disable anything that's still active */
++ temp = ehci_readl(ehci, &ehci->regs->command);
++ temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
++ ehci_writel(ehci, temp, &ehci->regs->command);
++
++ /* hardware can take 16 microframes to turn off ... */
++ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
++ 0, 16 * 125) != 0) {
++ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
++ return;
++ }
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void ehci_work(struct ehci_hcd *ehci);
++
++#include "ehci-hub.c"
++#include "ehci-mem.c"
++#include "ehci-q.c"
++#include "ehci-sched.c"
++
++/*-------------------------------------------------------------------------*/
++
++static void ehci_watchdog (unsigned long param)
++{
++ struct ehci_hcd *ehci = (struct ehci_hcd *) param;
++ unsigned long flags;
++
++ spin_lock_irqsave (&ehci->lock, flags);
++
++ /* lost IAA irqs wedge things badly; seen with a vt8235 */
++ if (ehci->reclaim) {
++ u32 status = ehci_readl(ehci, &ehci->regs->status);
++ if (status & STS_IAA) {
++ ehci_vdbg (ehci, "lost IAA\n");
++ COUNT (ehci->stats.lost_iaa);
++ ehci_writel(ehci, STS_IAA, &ehci->regs->status);
++ ehci->reclaim_ready = 1;
++ }
++ }
++
++ /* stop async processing after it's idled a bit */
++ if (test_bit (TIMER_ASYNC_OFF, &ehci->actions))
++ start_unlink_async (ehci, ehci->async);
++
++ /* ehci could run by timer, without IRQs ... */
++ ehci_work (ehci);
++
++ spin_unlock_irqrestore (&ehci->lock, flags);
++}
++
++/* On some systems, leaving remote wakeup enabled prevents system shutdown.
++ * The firmware seems to think that powering off is a wakeup event!
++ * This routine turns off remote wakeup and everything else, on all ports.
++ */
++static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
++{
++ int port = HCS_N_PORTS(ehci->hcs_params);
++
++ while (port--)
++ ehci_writel(ehci, PORT_RWC_BITS,
++ &ehci->regs->port_status[port]);
++}
++
++/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
++ * This forcibly disables dma and IRQs, helping kexec and other cases
++ * where the next system software may expect clean state.
++ */
++static void
++ehci_shutdown (struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci;
++
++ ehci = hcd_to_ehci (hcd);
++ (void) ehci_halt (ehci);
++ ehci_turn_off_all_ports(ehci);
++
++ /* make BIOS/etc use companion controller during reboot */
++ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
++
++ /* unblock posted writes */
++ ehci_readl(ehci, &ehci->regs->configured_flag);
++}
++
++static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
++{
++ unsigned port;
++
++ if (!HCS_PPC (ehci->hcs_params))
++ return;
++
++ ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
++ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
++ (void) ehci_hub_control(ehci_to_hcd(ehci),
++ is_on ? SetPortFeature : ClearPortFeature,
++ USB_PORT_FEAT_POWER,
++ port--, NULL, 0);
++ msleep(20);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * ehci_work is called from some interrupts, timers, and so on.
++ * it calls driver completion functions, after dropping ehci->lock.
++ */
++static void ehci_work (struct ehci_hcd *ehci)
++{
++ timer_action_done (ehci, TIMER_IO_WATCHDOG);
++ if (ehci->reclaim_ready)
++ end_unlink_async (ehci);
++
++ /* another CPU may drop ehci->lock during a schedule scan while
++ * it reports urb completions. this flag guards against bogus
++ * attempts at re-entrant schedule scanning.
++ */
++ if (ehci->scanning)
++ return;
++ ehci->scanning = 1;
++ scan_async (ehci);
++ if (ehci->next_uframe != -1)
++ scan_periodic (ehci);
++ ehci->scanning = 0;
++
++ /* the IO watchdog guards against hardware or driver bugs that
++ * misplace IRQs, and should let us run completely without IRQs.
++ * such lossage has been observed on both VT6202 and VT8235.
++ */
++ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
++ (ehci->async->qh_next.ptr != NULL ||
++ ehci->periodic_sched != 0))
++ timer_action (ehci, TIMER_IO_WATCHDOG);
++}
++
++static void ehci_stop (struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++
++ ehci_dbg (ehci, "stop\n");
++
++ /* Turn off port power on all root hub ports. */
++ ehci_port_power (ehci, 0);
++
++ /* no more interrupts ... */
++ del_timer_sync (&ehci->watchdog);
++
++ spin_lock_irq(&ehci->lock);
++ if (HC_IS_RUNNING (hcd->state))
++ ehci_quiesce (ehci);
++
++ ehci_reset (ehci);
++ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
++ spin_unlock_irq(&ehci->lock);
++
++ /* let companion controllers work when we aren't */
++ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
++
++ remove_companion_file(ehci);
++ remove_debug_files (ehci);
++
++ /* root hub is shut down separately (first, when possible) */
++ spin_lock_irq (&ehci->lock);
++ if (ehci->async)
++ ehci_work (ehci);
++ spin_unlock_irq (&ehci->lock);
++ ehci_mem_cleanup (ehci);
++
++#ifdef EHCI_STATS
++ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
++ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
++ ehci->stats.lost_iaa);
++ ehci_dbg (ehci, "complete %ld unlink %ld\n",
++ ehci->stats.complete, ehci->stats.unlink);
++#endif
++
++ dbg_status (ehci, "ehci_stop completed",
++ ehci_readl(ehci, &ehci->regs->status));
++}
++
++/* one-time init, only for memory state */
++static int ehci_init(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ u32 temp;
++ int retval;
++ u32 hcc_params;
++
++ spin_lock_init(&ehci->lock);
++
++ init_timer(&ehci->watchdog);
++ ehci->watchdog.function = ehci_watchdog;
++ ehci->watchdog.data = (unsigned long) ehci;
++
++ /*
++ * hw default: 1K periodic list heads, one per frame.
++ * periodic_size can shrink by USBCMD update if hcc_params allows.
++ */
++ ehci->periodic_size = DEFAULT_I_TDPS;
++ if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
++ return retval;
++
++ /* controllers may cache some of the periodic schedule ... */
++ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
++ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
++ ehci->i_thresh = 8;
++ else // N microframes cached
++ ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
++
++ ehci->reclaim = NULL;
++ ehci->reclaim_ready = 0;
++ ehci->next_uframe = -1;
++
++ /*
++ * dedicate a qh for the async ring head, since we couldn't unlink
++ * a 'real' qh without stopping the async schedule [4.8]. use it
++ * as the 'reclamation list head' too.
++ * its dummy is used in hw_alt_next of many tds, to prevent the qh
++ * from automatically advancing to the next td after short reads.
++ */
++ ehci->async->qh_next.qh = NULL;
++ ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma);
++ ehci->async->hw_info1 = cpu_to_le32(QH_HEAD);
++ ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT);
++ ehci->async->hw_qtd_next = EHCI_LIST_END;
++ ehci->async->qh_state = QH_STATE_LINKED;
++ ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma);
++
++ /* clear interrupt enables, set irq latency */
++ if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
++ log2_irq_thresh = 0;
++ temp = 1 << (16 + log2_irq_thresh);
++ if (HCC_CANPARK(hcc_params)) {
++ /* HW default park == 3, on hardware that supports it (like
++ * NVidia and ALI silicon), maximizes throughput on the async
++ * schedule by avoiding QH fetches between transfers.
++ *
++ * With fast usb storage devices and NForce2, "park" seems to
++ * make problems: throughput reduction (!), data errors...
++ */
++ if (park) {
++ park = min(park, (unsigned) 3);
++ temp |= CMD_PARK;
++ temp |= park << 8;
++ }
++ ehci_dbg(ehci, "park %d\n", park);
++ }
++ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
++ /* periodic schedule size can be smaller than default */
++ temp &= ~(3 << 2);
++ temp |= (EHCI_TUNE_FLS << 2);
++ switch (EHCI_TUNE_FLS) {
++ case 0: ehci->periodic_size = 1024; break;
++ case 1: ehci->periodic_size = 512; break;
++ case 2: ehci->periodic_size = 256; break;
++ default: BUG();
++ }
++ }
++ ehci->command = temp;
++
++ return 0;
++}
++
++/* start HC running; it's halted, ehci_init() has been run (once) */
++static int ehci_run (struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ int retval;
++ u32 temp;
++ u32 hcc_params;
++
++ hcd->uses_new_polling = 1;
++ hcd->poll_rh = 0;
++
++ /* EHCI spec section 4.1 */
++ if ((retval = ehci_reset(ehci)) != 0) {
++ ehci_mem_cleanup(ehci);
++ return retval;
++ }
++ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
++ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
++
++ /*
++ * hcc_params controls whether ehci->regs->segment must (!!!)
++ * be used; it constrains QH/ITD/SITD and QTD locations.
++ * pci_pool consistent memory always uses segment zero.
++ * streaming mappings for I/O buffers, like pci_map_single(),
++ * can return segments above 4GB, if the device allows.
++ *
++ * NOTE: the dma mask is visible through dma_supported(), so
++ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
++ * Scsi_Host.highmem_io, and so forth. It's readonly to all
++ * host side drivers though.
++ */
++ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
++ if (HCC_64BIT_ADDR(hcc_params)) {
++ ehci_writel(ehci, 0, &ehci->regs->segment);
++#if 0
++// this is deeply broken on almost all architectures
++ if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
++ ehci_info(ehci, "enabled 64bit DMA\n");
++#endif
++ }
++
++
++ // Philips, Intel, and maybe others need CMD_RUN before the
++ // root hub will detect new devices (why?); NEC doesn't
++ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
++ ehci->command |= CMD_RUN;
++ ehci_writel(ehci, ehci->command, &ehci->regs->command);
++ dbg_cmd (ehci, "init", ehci->command);
++
++ /*
++ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
++ * are explicitly handed to companion controller(s), so no TT is
++ * involved with the root hub. (Except where one is integrated,
++ * and there's no companion controller unless maybe for USB OTG.)
++ */
++ hcd->state = HC_STATE_RUNNING;
++ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
++ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
++
++ temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ ehci_info (ehci,
++ "USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
++ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
++ temp >> 8, temp & 0xff, DRIVER_VERSION,
++ ignore_oc ? ", overcurrent ignored" : "");
++
++ ehci_writel(ehci, INTR_MASK,
++ &ehci->regs->intr_enable); /* Turn On Interrupts */
++
++ /* GRR this is run-once init(), being done every time the HC starts.
++ * So long as they're part of class devices, we can't do it init()
++ * since the class device isn't created that early.
++ */
++ create_debug_files(ehci);
++ create_companion_file(ehci);
++
++ return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static irqreturn_t ehci_irq (struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ u32 status, pcd_status = 0;
++ int bh;
++
++ spin_lock (&ehci->lock);
++
++ status = ehci_readl(ehci, &ehci->regs->status);
++
++ /* e.g. cardbus physical eject */
++ if (status == ~(u32) 0) {
++ ehci_dbg (ehci, "device removed\n");
++ goto dead;
++ }
++
++ status &= INTR_MASK;
++ if (!status) { /* irq sharing? */
++ spin_unlock(&ehci->lock);
++ return IRQ_NONE;
++ }
++
++ /* clear (just) interrupts */
++ ehci_writel(ehci, status, &ehci->regs->status);
++ ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
++ bh = 0;
++
++#ifdef EHCI_VERBOSE_DEBUG
++ /* unrequested/ignored: Frame List Rollover */
++ dbg_status (ehci, "irq", status);
++#endif
++
++ /* INT, ERR, and IAA interrupt rates can be throttled */
++
++ /* normal [4.15.1.2] or error [4.15.1.1] completion */
++ if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
++ if (likely ((status & STS_ERR) == 0))
++ COUNT (ehci->stats.normal);
++ else
++ COUNT (ehci->stats.error);
++ bh = 1;
++ }
++
++ /* complete the unlinking of some qh [4.15.2.3] */
++ if (status & STS_IAA) {
++ COUNT (ehci->stats.reclaim);
++ ehci->reclaim_ready = 1;
++ bh = 1;
++ }
++
++ /* remote wakeup [4.3.1] */
++ if (status & STS_PCD) {
++ unsigned i = HCS_N_PORTS (ehci->hcs_params);
++ pcd_status = status;
++
++ /* resume root hub? */
++ if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN))
++ usb_hcd_resume_root_hub(hcd);
++
++ while (i--) {
++ int pstatus = ehci_readl(ehci,
++ &ehci->regs->port_status [i]);
++
++ if (pstatus & PORT_OWNER)
++ continue;
++ if (!(pstatus & PORT_RESUME)
++ || ehci->reset_done [i] != 0)
++ continue;
++
++ /* start 20 msec resume signaling from this port,
++ * and make khubd collect PORT_STAT_C_SUSPEND to
++ * stop that signaling.
++ */
++ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
++ ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
++ mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
++ }
++ }
++
++ /* PCI errors [4.15.2.4] */
++ if (unlikely ((status & STS_FATAL) != 0)) {
++ /* bogus "fatal" IRQs appear on some chips... why? */
++ status = ehci_readl(ehci, &ehci->regs->status);
++ dbg_cmd (ehci, "fatal", ehci_readl(ehci,
++ &ehci->regs->command));
++ dbg_status (ehci, "fatal", status);
++ if (status & STS_HALT) {
++ ehci_err (ehci, "fatal error\n");
++dead:
++ ehci_reset (ehci);
++ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
++ /* generic layer kills/unlinks all urbs, then
++ * uses ehci_stop to clean up the rest
++ */
++ bh = 1;
++ }
++ }
++
++ if (bh)
++ ehci_work (ehci);
++ spin_unlock (&ehci->lock);
++ if (pcd_status & STS_PCD)
++ usb_hcd_poll_rh_status(hcd);
++ return IRQ_HANDLED;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * non-error returns are a promise to giveback() the urb later
++ * we drop ownership so next owner (or urb unlink) can get it
++ *
++ * urb + dev is in hcd.self.controller.urb_list
++ * we're queueing TDs onto software and hardware lists
++ *
++ * hcd-specific init for hcpriv hasn't been done yet
++ *
++ * NOTE: control, bulk, and interrupt share the same code to append TDs
++ * to a (possibly active) QH, and the same QH scanning code.
++ */
++static int ehci_urb_enqueue (
++ struct usb_hcd *hcd,
++ struct usb_host_endpoint *ep,
++ struct urb *urb,
++ gfp_t mem_flags
++) {
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ struct list_head qtd_list;
++
++ INIT_LIST_HEAD (&qtd_list);
++
++ switch (usb_pipetype (urb->pipe)) {
++ // case PIPE_CONTROL:
++ // case PIPE_BULK:
++ default:
++ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
++ return -ENOMEM;
++ return submit_async (ehci, ep, urb, &qtd_list, mem_flags);
++
++ case PIPE_INTERRUPT:
++ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
++ return -ENOMEM;
++ return intr_submit (ehci, ep, urb, &qtd_list, mem_flags);
++
++ case PIPE_ISOCHRONOUS:
++ if (urb->dev->speed == USB_SPEED_HIGH)
++ return itd_submit (ehci, urb, mem_flags);
++ else
++ return sitd_submit (ehci, urb, mem_flags);
++ }
++}
++
++static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
++{
++ /* if we need to use IAA and it's busy, defer */
++ if (qh->qh_state == QH_STATE_LINKED
++ && ehci->reclaim
++ && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) {
++ struct ehci_qh *last;
++
++ for (last = ehci->reclaim;
++ last->reclaim;
++ last = last->reclaim)
++ continue;
++ qh->qh_state = QH_STATE_UNLINK_WAIT;
++ last->reclaim = qh;
++
++ /* bypass IAA if the hc can't care */
++ } else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim)
++ end_unlink_async (ehci);
++
++ /* something else might have unlinked the qh by now */
++ if (qh->qh_state == QH_STATE_LINKED)
++ start_unlink_async (ehci, qh);
++}
++
++/* remove from hardware lists
++ * completions normally happen asynchronously
++ */
++
++static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ struct ehci_qh *qh;
++ unsigned long flags;
++
++ spin_lock_irqsave (&ehci->lock, flags);
++ switch (usb_pipetype (urb->pipe)) {
++ // case PIPE_CONTROL:
++ // case PIPE_BULK:
++ default:
++ qh = (struct ehci_qh *) urb->hcpriv;
++ if (!qh)
++ break;
++ unlink_async (ehci, qh);
++ break;
++
++ case PIPE_INTERRUPT:
++ qh = (struct ehci_qh *) urb->hcpriv;
++ if (!qh)
++ break;
++ switch (qh->qh_state) {
++ case QH_STATE_LINKED:
++ intr_deschedule (ehci, qh);
++ /* FALL THROUGH */
++ case QH_STATE_IDLE:
++ qh_completions (ehci, qh);
++ break;
++ default:
++ ehci_dbg (ehci, "bogus qh %p state %d\n",
++ qh, qh->qh_state);
++ goto done;
++ }
++
++ /* reschedule QH iff another request is queued */
++ if (!list_empty (&qh->qtd_list)
++ && HC_IS_RUNNING (hcd->state)) {
++ int status;
++
++ status = qh_schedule (ehci, qh);
++ spin_unlock_irqrestore (&ehci->lock, flags);
++
++ if (status != 0) {
++ // shouldn't happen often, but ...
++ // FIXME kill those tds' urbs
++ err ("can't reschedule qh %p, err %d",
++ qh, status);
++ }
++ return status;
++ }
++ break;
++
++ case PIPE_ISOCHRONOUS:
++ // itd or sitd ...
++
++ // wait till next completion, do it then.
++ // completion irqs can wait up to 1024 msec,
++ break;
++ }
++done:
++ spin_unlock_irqrestore (&ehci->lock, flags);
++ return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++// bulk qh holds the data toggle
++
++static void
++ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ unsigned long flags;
++ struct ehci_qh *qh, *tmp;
++
++ /* ASSERT: any requests/urbs are being unlinked */
++ /* ASSERT: nobody can be submitting urbs for this any more */
++
++rescan:
++ spin_lock_irqsave (&ehci->lock, flags);
++ qh = ep->hcpriv;
++ if (!qh)
++ goto done;
++
++ /* endpoints can be iso streams. for now, we don't
++ * accelerate iso completions ... so spin a while.
++ */
++ if (qh->hw_info1 == 0) {
++ ehci_vdbg (ehci, "iso delay\n");
++ goto idle_timeout;
++ }
++
++ if (!HC_IS_RUNNING (hcd->state))
++ qh->qh_state = QH_STATE_IDLE;
++ switch (qh->qh_state) {
++ case QH_STATE_LINKED:
++ for (tmp = ehci->async->qh_next.qh;
++ tmp && tmp != qh;
++ tmp = tmp->qh_next.qh)
++ continue;
++ /* periodic qh self-unlinks on empty */
++ if (!tmp)
++ goto nogood;
++ unlink_async (ehci, qh);
++ /* FALL THROUGH */
++ case QH_STATE_UNLINK: /* wait for hw to finish? */
++idle_timeout:
++ spin_unlock_irqrestore (&ehci->lock, flags);
++ schedule_timeout_uninterruptible(1);
++ goto rescan;
++ case QH_STATE_IDLE: /* fully unlinked */
++ if (list_empty (&qh->qtd_list)) {
++ qh_put (qh);
++ break;
++ }
++ /* else FALL THROUGH */
++ default:
++nogood:
++ /* caller was supposed to have unlinked any requests;
++ * that's not our job. just leak this memory.
++ */
++ ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
++ qh, ep->desc.bEndpointAddress, qh->qh_state,
++ list_empty (&qh->qtd_list) ? "" : "(has tds)");
++ break;
++ }
++ ep->hcpriv = NULL;
++done:
++ spin_unlock_irqrestore (&ehci->lock, flags);
++ return;
++}
++
++static int ehci_get_frame (struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
++ return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
++ ehci->periodic_size;
++}
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
++
++MODULE_DESCRIPTION (DRIVER_INFO);
++MODULE_AUTHOR (DRIVER_AUTHOR);
++MODULE_LICENSE ("GPL");
++
++#ifdef CONFIG_PCI
++#include "ehci-pci.c"
++#define PCI_DRIVER ehci_pci_driver
++#endif
++
++#ifdef CONFIG_MPC834x
++#include "ehci-fsl.c"
++#define PLATFORM_DRIVER ehci_fsl_driver
++#endif
++
++#ifdef CONFIG_SOC_AU1200
++#include "ehci-au1xxx.c"
++#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
++#endif
++
++#ifdef CONFIG_PPC_PS3
++#include "ehci-ps3.c"
++#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_sb_driver
++#endif
++
++#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
++ !defined(PS3_SYSTEM_BUS_DRIVER)
++#error "missing bus glue for ehci-hcd"
++#endif
++
++static int __init ehci_hcd_init(void)
++{
++ int retval = 0;
++
++ pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
++ hcd_name,
++ sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
++ sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
++
++#ifdef PLATFORM_DRIVER
++ retval = platform_driver_register(&PLATFORM_DRIVER);
++ if (retval < 0)
++ return retval;
++#endif
++
++#ifdef PCI_DRIVER
++ retval = pci_register_driver(&PCI_DRIVER);
++ if (retval < 0) {
++#ifdef PLATFORM_DRIVER
++ platform_driver_unregister(&PLATFORM_DRIVER);
++#endif
++ return retval;
++ }
++#endif
++
++#ifdef PS3_SYSTEM_BUS_DRIVER
++ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
++ retval = ps3_system_bus_driver_register(
++ &PS3_SYSTEM_BUS_DRIVER);
++ if (retval < 0) {
++#ifdef PLATFORM_DRIVER
++ platform_driver_unregister(&PLATFORM_DRIVER);
++#endif
++#ifdef PCI_DRIVER
++ pci_unregister_driver(&PCI_DRIVER);
++#endif
++ return retval;
++ }
++ }
++#endif
++
++ return retval;
++}
++module_init(ehci_hcd_init);
++
++static void __exit ehci_hcd_cleanup(void)
++{
++#ifdef PLATFORM_DRIVER
++ platform_driver_unregister(&PLATFORM_DRIVER);
++#endif
++#ifdef PCI_DRIVER
++ pci_unregister_driver(&PCI_DRIVER);
++#endif
++#ifdef PS3_SYSTEM_BUS_DRIVER
++ if (firmware_has_feature(FW_FEATURE_PS3_LV1))
++ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
++#endif
++}
++module_exit(ehci_hcd_cleanup);
++
+diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig
+--- linux-2.6.21.1/drivers/usb/host/ehci.h.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,707 @@
++/*
++ * Copyright (c) 2001-2002 by David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef __LINUX_EHCI_HCD_H
++#define __LINUX_EHCI_HCD_H
++
++/* definitions used for the EHCI driver */
++
++/* statistics can be kept for for tuning/monitoring */
++struct ehci_stats {
++ /* irq usage */
++ unsigned long normal;
++ unsigned long error;
++ unsigned long reclaim;
++ unsigned long lost_iaa;
++
++ /* termination of urbs from core */
++ unsigned long complete;
++ unsigned long unlink;
++};
++
++/* ehci_hcd->lock guards shared data against other CPUs:
++ * ehci_hcd: async, reclaim, periodic (and shadow), ...
++ * usb_host_endpoint: hcpriv
++ * ehci_qh: qh_next, qtd_list
++ * ehci_qtd: qtd_list
++ *
++ * Also, hold this lock when talking to HC registers or
++ * when updating hw_* fields in shared qh/qtd/... structures.
++ */
++
++#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
++
++struct ehci_hcd { /* one per controller */
++ /* glue to PCI and HCD framework */
++ struct ehci_caps __iomem *caps;
++ struct ehci_regs __iomem *regs;
++ struct ehci_dbg_port __iomem *debug;
++
++ __u32 hcs_params; /* cached register copy */
++ spinlock_t lock;
++
++ /* async schedule support */
++ struct ehci_qh *async;
++ struct ehci_qh *reclaim;
++ unsigned reclaim_ready : 1;
++ unsigned scanning : 1;
++
++ /* periodic schedule support */
++#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
++ unsigned periodic_size;
++ __le32 *periodic; /* hw periodic table */
++ dma_addr_t periodic_dma;
++ unsigned i_thresh; /* uframes HC might cache */
++
++ union ehci_shadow *pshadow; /* mirror hw periodic table */
++ int next_uframe; /* scan periodic, start here */
++ unsigned periodic_sched; /* periodic activity count */
++
++ /* per root hub port */
++ unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
++ /* bit vectors (one bit per port) */
++ unsigned long bus_suspended; /* which ports were
++ already suspended at the start of a bus suspend */
++ unsigned long companion_ports; /* which ports are
++ dedicated to the companion controller */
++
++ /* per-HC memory pools (could be per-bus, but ...) */
++ struct dma_pool *qh_pool; /* qh per active urb */
++ struct dma_pool *qtd_pool; /* one or more per qh */
++ struct dma_pool *itd_pool; /* itd per iso urb */
++ struct dma_pool *sitd_pool; /* sitd per split iso urb */
++
++ struct timer_list watchdog;
++ unsigned long actions;
++ unsigned stamp;
++ unsigned long next_statechange;
++ u32 command;
++
++ /* SILICON QUIRKS */
++ unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
++ unsigned no_selective_suspend:1;
++ unsigned has_fsl_port_bug:1; /* FreeScale */
++ unsigned big_endian_mmio:1;
++
++ u8 sbrn; /* packed release number */
++
++ /* irq statistics */
++#ifdef EHCI_STATS
++ struct ehci_stats stats;
++# define COUNT(x) do { (x)++; } while (0)
++#else
++# define COUNT(x) do {} while (0)
++#endif
++};
++
++/* convert between an HCD pointer and the corresponding EHCI_HCD */
++static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
++{
++ return (struct ehci_hcd *) (hcd->hcd_priv);
++}
++static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
++{
++ return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
++}
++
++
++enum ehci_timer_action {
++ TIMER_IO_WATCHDOG,
++ TIMER_IAA_WATCHDOG,
++ TIMER_ASYNC_SHRINK,
++ TIMER_ASYNC_OFF,
++};
++
++static inline void
++timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
++{
++ clear_bit (action, &ehci->actions);
++}
++
++static inline void
++timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
++{
++ if (!test_and_set_bit (action, &ehci->actions)) {
++ unsigned long t;
++
++ switch (action) {
++ case TIMER_IAA_WATCHDOG:
++ t = EHCI_IAA_JIFFIES;
++ break;
++ case TIMER_IO_WATCHDOG:
++ t = EHCI_IO_JIFFIES;
++ break;
++ case TIMER_ASYNC_OFF:
++ t = EHCI_ASYNC_JIFFIES;
++ break;
++ // case TIMER_ASYNC_SHRINK:
++ default:
++ t = EHCI_SHRINK_JIFFIES;
++ break;
++ }
++ t += jiffies;
++ // all timings except IAA watchdog can be overridden.
++ // async queue SHRINK often precedes IAA. while it's ready
++ // to go OFF neither can matter, and afterwards the IO
++ // watchdog stops unless there's still periodic traffic.
++ if (action != TIMER_IAA_WATCHDOG
++ && t > ehci->watchdog.expires
++ && timer_pending (&ehci->watchdog))
++ return;
++ mod_timer (&ehci->watchdog, t);
++ }
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
++
++/* Section 2.2 Host Controller Capability Registers */
++struct ehci_caps {
++ /* these fields are specified as 8 and 16 bit registers,
++ * but some hosts can't perform 8 or 16 bit PCI accesses.
++ */
++ u32 hc_capbase;
++#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
++#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
++ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
++#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
++#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
++#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
++#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
++#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
++#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
++#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
++
++ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
++#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
++#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
++#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
++#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
++#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
++#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
++ u8 portroute [8]; /* nibbles for routing - offset 0xC */
++} __attribute__ ((packed));
++
++
++/* Section 2.3 Host Controller Operational Registers */
++struct ehci_regs {
++
++ /* USBCMD: offset 0x00 */
++ u32 command;
++/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
++#define CMD_PARK (1<<11) /* enable "park" on async qh */
++#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
++#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
++#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
++#define CMD_ASE (1<<5) /* async schedule enable */
++#define CMD_PSE (1<<4) /* periodic schedule enable */
++/* 3:2 is periodic frame list size */
++#define CMD_RESET (1<<1) /* reset HC not bus */
++#define CMD_RUN (1<<0) /* start/stop HC */
++
++ /* USBSTS: offset 0x04 */
++ u32 status;
++#define STS_ASS (1<<15) /* Async Schedule Status */
++#define STS_PSS (1<<14) /* Periodic Schedule Status */
++#define STS_RECL (1<<13) /* Reclamation */
++#define STS_HALT (1<<12) /* Not running (any reason) */
++/* some bits reserved */
++ /* these STS_* flags are also intr_enable bits (USBINTR) */
++#define STS_IAA (1<<5) /* Interrupted on async advance */
++#define STS_FATAL (1<<4) /* such as some PCI access errors */
++#define STS_FLR (1<<3) /* frame list rolled over */
++#define STS_PCD (1<<2) /* port change detect */
++#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
++#define STS_INT (1<<0) /* "normal" completion (short, ...) */
++
++ /* USBINTR: offset 0x08 */
++ u32 intr_enable;
++
++ /* FRINDEX: offset 0x0C */
++ u32 frame_index; /* current microframe number */
++ /* CTRLDSSEGMENT: offset 0x10 */
++ u32 segment; /* address bits 63:32 if needed */
++ /* PERIODICLISTBASE: offset 0x14 */
++ u32 frame_list; /* points to periodic list */
++ /* ASYNCLISTADDR: offset 0x18 */
++ u32 async_next; /* address of next async queue head */
++
++ u32 reserved [9];
++
++ /* CONFIGFLAG: offset 0x40 */
++ u32 configured_flag;
++#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
++
++ /* PORTSC: offset 0x44 */
++ u32 port_status [0]; /* up to N_PORTS */
++/* 31:23 reserved */
++#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
++#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
++#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
++/* 19:16 for port testing */
++#define PORT_LED_OFF (0<<14)
++#define PORT_LED_AMBER (1<<14)
++#define PORT_LED_GREEN (2<<14)
++#define PORT_LED_MASK (3<<14)
++#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
++#define PORT_POWER (1<<12) /* true: has power (see PPC) */
++#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
++/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
++/* 9 reserved */
++#define PORT_RESET (1<<8) /* reset port */
++#define PORT_SUSPEND (1<<7) /* suspend port */
++#define PORT_RESUME (1<<6) /* resume it */
++#define PORT_OCC (1<<5) /* over current change */
++#define PORT_OC (1<<4) /* over current active */
++#define PORT_PEC (1<<3) /* port enable change */
++#define PORT_PE (1<<2) /* port enable */
++#define PORT_CSC (1<<1) /* connect status change */
++#define PORT_CONNECT (1<<0) /* device connected */
++#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
++} __attribute__ ((packed));
++
++/* Appendix C, Debug port ... intended for use with special "debug devices"
++ * that can help if there's no serial console. (nonstandard enumeration.)
++ */
++struct ehci_dbg_port {
++ u32 control;
++#define DBGP_OWNER (1<<30)
++#define DBGP_ENABLED (1<<28)
++#define DBGP_DONE (1<<16)
++#define DBGP_INUSE (1<<10)
++#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
++# define DBGP_ERR_BAD 1
++# define DBGP_ERR_SIGNAL 2
++#define DBGP_ERROR (1<<6)
++#define DBGP_GO (1<<5)
++#define DBGP_OUT (1<<4)
++#define DBGP_LEN(x) (((x)>>0)&0x0f)
++ u32 pids;
++#define DBGP_PID_GET(x) (((x)>>16)&0xff)
++#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
++ u32 data03;
++ u32 data47;
++ u32 address;
++#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
++} __attribute__ ((packed));
++
++/*-------------------------------------------------------------------------*/
++
++#define QTD_NEXT(dma) cpu_to_le32((u32)dma)
++
++/*
++ * EHCI Specification 0.95 Section 3.5
++ * QTD: describe data transfer components (buffer, direction, ...)
++ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
++ *
++ * These are associated only with "QH" (Queue Head) structures,
++ * used with control, bulk, and interrupt transfers.
++ */
++struct ehci_qtd {
++ /* first part defined by EHCI spec */
++ __le32 hw_next; /* see EHCI 3.5.1 */
++ __le32 hw_alt_next; /* see EHCI 3.5.2 */
++ __le32 hw_token; /* see EHCI 3.5.3 */
++#define QTD_TOGGLE (1 << 31) /* data toggle */
++#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
++#define QTD_IOC (1 << 15) /* interrupt on complete */
++#define QTD_CERR(tok) (((tok)>>10) & 0x3)
++#define QTD_PID(tok) (((tok)>>8) & 0x3)
++#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
++#define QTD_STS_HALT (1 << 6) /* halted on error */
++#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
++#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
++#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
++#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
++#define QTD_STS_STS (1 << 1) /* split transaction state */
++#define QTD_STS_PING (1 << 0) /* issue PING? */
++ __le32 hw_buf [5]; /* see EHCI 3.5.4 */
++ __le32 hw_buf_hi [5]; /* Appendix B */
++
++ /* the rest is HCD-private */
++ dma_addr_t qtd_dma; /* qtd address */
++ struct list_head qtd_list; /* sw qtd list */
++ struct urb *urb; /* qtd's urb */
++ size_t length; /* length of buffer */
++} __attribute__ ((aligned (32)));
++
++/* mask NakCnt+T in qh->hw_alt_next */
++#define QTD_MASK __constant_cpu_to_le32 (~0x1f)
++
++#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
++
++/*-------------------------------------------------------------------------*/
++
++/* type tag from {qh,itd,sitd,fstn}->hw_next */
++#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))
++
++/* values for that type tag */
++#define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1)
++#define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1)
++#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1)
++#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1)
++
++/* next async queue entry, or pointer to interrupt/periodic QH */
++#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
++
++/* for periodic/async schedules and qtd lists, mark end of list */
++#define EHCI_LIST_END __constant_cpu_to_le32(1) /* "null pointer" to hw */
++
++/*
++ * Entries in periodic shadow table are pointers to one of four kinds
++ * of data structure. That's dictated by the hardware; a type tag is
++ * encoded in the low bits of the hardware's periodic schedule. Use
++ * Q_NEXT_TYPE to get the tag.
++ *
++ * For entries in the async schedule, the type tag always says "qh".
++ */
++union ehci_shadow {
++ struct ehci_qh *qh; /* Q_TYPE_QH */
++ struct ehci_itd *itd; /* Q_TYPE_ITD */
++ struct ehci_sitd *sitd; /* Q_TYPE_SITD */
++ struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
++ __le32 *hw_next; /* (all types) */
++ void *ptr;
++};
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * EHCI Specification 0.95 Section 3.6
++ * QH: describes control/bulk/interrupt endpoints
++ * See Fig 3-7 "Queue Head Structure Layout".
++ *
++ * These appear in both the async and (for interrupt) periodic schedules.
++ */
++
++struct ehci_qh {
++ /* first part defined by EHCI spec */
++ __le32 hw_next; /* see EHCI 3.6.1 */
++ __le32 hw_info1; /* see EHCI 3.6.2 */
++#define QH_HEAD 0x00008000
++ __le32 hw_info2; /* see EHCI 3.6.2 */
++#define QH_SMASK 0x000000ff
++#define QH_CMASK 0x0000ff00
++#define QH_HUBADDR 0x007f0000
++#define QH_HUBPORT 0x3f800000
++#define QH_MULT 0xc0000000
++ __le32 hw_current; /* qtd list - see EHCI 3.6.4 */
++
++ /* qtd overlay (hardware parts of a struct ehci_qtd) */
++ __le32 hw_qtd_next;
++ __le32 hw_alt_next;
++ __le32 hw_token;
++ __le32 hw_buf [5];
++ __le32 hw_buf_hi [5];
++
++ /* the rest is HCD-private */
++ dma_addr_t qh_dma; /* address of qh */
++ union ehci_shadow qh_next; /* ptr to qh; or periodic */
++ struct list_head qtd_list; /* sw qtd list */
++ struct ehci_qtd *dummy;
++ struct ehci_qh *reclaim; /* next to reclaim */
++
++ struct ehci_hcd *ehci;
++ struct kref kref;
++ unsigned stamp;
++
++ u8 qh_state;
++#define QH_STATE_LINKED 1 /* HC sees this */
++#define QH_STATE_UNLINK 2 /* HC may still see this */
++#define QH_STATE_IDLE 3 /* HC doesn't see this */
++#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
++#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
++
++ /* periodic schedule info */
++ u8 usecs; /* intr bandwidth */
++ u8 gap_uf; /* uframes split/csplit gap */
++ u8 c_usecs; /* ... split completion bw */
++ u16 tt_usecs; /* tt downstream bandwidth */
++ unsigned short period; /* polling interval */
++ unsigned short start; /* where polling starts */
++#define NO_FRAME ((unsigned short)~0) /* pick new start */
++ struct usb_device *dev; /* access to TT */
++} __attribute__ ((aligned (32)));
++
++/*-------------------------------------------------------------------------*/
++
++/* description of one iso transaction (up to 3 KB data if highspeed) */
++struct ehci_iso_packet {
++ /* These will be copied to iTD when scheduling */
++ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
++ __le32 transaction; /* itd->hw_transaction[i] |= */
++ u8 cross; /* buf crosses pages */
++ /* for full speed OUT splits */
++ u32 buf1;
++};
++
++/* temporary schedule data for packets from iso urbs (both speeds)
++ * each packet is one logical usb transaction to the device (not TT),
++ * beginning at stream->next_uframe
++ */
++struct ehci_iso_sched {
++ struct list_head td_list;
++ unsigned span;
++ struct ehci_iso_packet packet [0];
++};
++
++/*
++ * ehci_iso_stream - groups all (s)itds for this endpoint.
++ * acts like a qh would, if EHCI had them for ISO.
++ */
++struct ehci_iso_stream {
++ /* first two fields match QH, but info1 == 0 */
++ __le32 hw_next;
++ __le32 hw_info1;
++
++ u32 refcount;
++ u8 bEndpointAddress;
++ u8 highspeed;
++ u16 depth; /* depth in uframes */
++ struct list_head td_list; /* queued itds/sitds */
++ struct list_head free_list; /* list of unused itds/sitds */
++ struct usb_device *udev;
++ struct usb_host_endpoint *ep;
++
++ /* output of (re)scheduling */
++ unsigned long start; /* jiffies */
++ unsigned long rescheduled;
++ int next_uframe;
++ __le32 splits;
++
++ /* the rest is derived from the endpoint descriptor,
++ * trusting urb->interval == f(epdesc->bInterval) and
++ * including the extra info for hw_bufp[0..2]
++ */
++ u8 interval;
++ u8 usecs, c_usecs;
++ u16 tt_usecs;
++ u16 maxp;
++ u16 raw_mask;
++ unsigned bandwidth;
++
++ /* This is used to initialize iTD's hw_bufp fields */
++ __le32 buf0;
++ __le32 buf1;
++ __le32 buf2;
++
++ /* this is used to initialize sITD's tt info */
++ __le32 address;
++};
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * EHCI Specification 0.95 Section 3.3
++ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
++ *
++ * Schedule records for high speed iso xfers
++ */
++struct ehci_itd {
++ /* first part defined by EHCI spec */
++ __le32 hw_next; /* see EHCI 3.3.1 */
++ __le32 hw_transaction [8]; /* see EHCI 3.3.2 */
++#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
++#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
++#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
++#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
++#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
++#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
++
++#define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE)
++
++ __le32 hw_bufp [7]; /* see EHCI 3.3.3 */
++ __le32 hw_bufp_hi [7]; /* Appendix B */
++
++ /* the rest is HCD-private */
++ dma_addr_t itd_dma; /* for this itd */
++ union ehci_shadow itd_next; /* ptr to periodic q entry */
++
++ struct urb *urb;
++ struct ehci_iso_stream *stream; /* endpoint's queue */
++ struct list_head itd_list; /* list of stream's itds */
++
++ /* any/all hw_transactions here may be used by that urb */
++ unsigned frame; /* where scheduled */
++ unsigned pg;
++ unsigned index[8]; /* in urb->iso_frame_desc */
++ u8 usecs[8];
++} __attribute__ ((aligned (32)));
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * EHCI Specification 0.95 Section 3.4
++ * siTD, aka split-transaction isochronous Transfer Descriptor
++ * ... describe full speed iso xfers through TT in hubs
++ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
++ */
++struct ehci_sitd {
++ /* first part defined by EHCI spec */
++ __le32 hw_next;
++/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
++ __le32 hw_fullspeed_ep; /* EHCI table 3-9 */
++ __le32 hw_uframe; /* EHCI table 3-10 */
++ __le32 hw_results; /* EHCI table 3-11 */
++#define SITD_IOC (1 << 31) /* interrupt on completion */
++#define SITD_PAGE (1 << 30) /* buffer 0/1 */
++#define SITD_LENGTH(x) (0x3ff & ((x)>>16))
++#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
++#define SITD_STS_ERR (1 << 6) /* error from TT */
++#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
++#define SITD_STS_BABBLE (1 << 4) /* device was babbling */
++#define SITD_STS_XACT (1 << 3) /* illegal IN response */
++#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
++#define SITD_STS_STS (1 << 1) /* split transaction state */
++
++#define SITD_ACTIVE __constant_cpu_to_le32(SITD_STS_ACTIVE)
++
++ __le32 hw_buf [2]; /* EHCI table 3-12 */
++ __le32 hw_backpointer; /* EHCI table 3-13 */
++ __le32 hw_buf_hi [2]; /* Appendix B */
++
++ /* the rest is HCD-private */
++ dma_addr_t sitd_dma;
++ union ehci_shadow sitd_next; /* ptr to periodic q entry */
++
++ struct urb *urb;
++ struct ehci_iso_stream *stream; /* endpoint's queue */
++ struct list_head sitd_list; /* list of stream's sitds */
++ unsigned frame;
++ unsigned index;
++} __attribute__ ((aligned (32)));
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * EHCI Specification 0.96 Section 3.7
++ * Periodic Frame Span Traversal Node (FSTN)
++ *
++ * Manages split interrupt transactions (using TT) that span frame boundaries
++ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
++ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
++ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
++ */
++struct ehci_fstn {
++ __le32 hw_next; /* any periodic q entry */
++ __le32 hw_prev; /* qh or EHCI_LIST_END */
++
++ /* the rest is HCD-private */
++ dma_addr_t fstn_dma;
++ union ehci_shadow fstn_next; /* ptr to periodic q entry */
++} __attribute__ ((aligned (32)));
++
++/*-------------------------------------------------------------------------*/
++
++#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
++
++/*
++ * Some EHCI controllers have a Transaction Translator built into the
++ * root hub. This is a non-standard feature. Each controller will need
++ * to add code to the following inline functions, and call them as
++ * needed (mostly in root hub code).
++ */
++
++#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
++
++/* Returns the speed of a device attached to a port on the root hub. */
++static inline unsigned int
++ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
++{
++ if (ehci_is_TDI(ehci)) {
++ switch ((portsc>>26)&3) {
++ case 0:
++ return 0;
++ case 1:
++ return (1<<USB_PORT_FEAT_LOWSPEED);
++ case 2:
++ default:
++ return (1<<USB_PORT_FEAT_HIGHSPEED);
++ }
++ }
++ return (1<<USB_PORT_FEAT_HIGHSPEED);
++}
++
++#else
++
++#define ehci_is_TDI(e) (0)
++
++#define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED)
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++#ifdef CONFIG_PPC_83xx
++/* Some Freescale processors have an erratum in which the TT
++ * port number in the queue head was 0..N-1 instead of 1..N.
++ */
++#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
++#else
++#define ehci_has_fsl_portno_bug(e) (0)
++#endif
++
++/*
++ * While most USB host controllers implement their registers in
++ * little-endian format, a minority (celleb companion chip) implement
++ * them in big endian format.
++ *
++ * This attempts to support either format at compile time without a
++ * runtime penalty, or both formats with the additional overhead
++ * of checking a flag bit.
++ */
++
++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
++#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
++#else
++#define ehci_big_endian_mmio(e) 0
++#endif
++
++static inline unsigned int ehci_readl (const struct ehci_hcd *ehci,
++ __u32 __iomem * regs)
++{
++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
++ return ehci_big_endian_mmio(ehci) ?
++ readl_be(regs) :
++ readl(regs);
++#else
++ return readl(regs);
++#endif
++}
++
++static inline void ehci_writel (const struct ehci_hcd *ehci,
++ const unsigned int val, __u32 __iomem *regs)
++{
++#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
++ ehci_big_endian_mmio(ehci) ?
++ writel_be(val, regs) :
++ writel(val, regs);
++#else
++ writel(val, regs);
++#endif
++}
++
++/*-------------------------------------------------------------------------*/
++
++#ifndef DEBUG
++#define STUB_DEBUG_FILES
++#endif /* DEBUG */
++
++/*-------------------------------------------------------------------------*/
++
++#endif /* __LINUX_EHCI_HCD_H */
+diff -Nur linux-2.6.21.1/include/asm-mips/bootinfo.h linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h
+--- linux-2.6.21.1/include/asm-mips/bootinfo.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h 2007-05-23 23:34:01.000000000 +0200
+@@ -213,6 +213,17 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
+ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+
+/*
@@ -167,9 +8874,9 @@ diff -Nur linux-2.6.17/include/asm-mips/bootinfo.h linux-2.6.17-owrt/include/asm
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);
-diff -Nur linux-2.6.17/include/asm-mips/cpu.h linux-2.6.17-owrt/include/asm-mips/cpu.h
---- linux-2.6.17/include/asm-mips/cpu.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-mips/cpu.h 2006-06-18 12:45:56.000000000 +0200
+diff -Nur linux-2.6.21.1/include/asm-mips/cpu.h linux-2.6.21.1-owrt/include/asm-mips/cpu.h
+--- linux-2.6.21.1/include/asm-mips/cpu.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/include/asm-mips/cpu.h 2007-05-23 23:34:01.000000000 +0200
@@ -54,6 +54,9 @@
#define PRID_IMP_R14000 0x0f00
#define PRID_IMP_R8000 0x1000
@@ -190,25 +8897,385 @@ diff -Nur linux-2.6.17/include/asm-mips/cpu.h linux-2.6.17-owrt/include/asm-mips
/*
* ISA Level encodings
-diff -Nur linux-2.6.17/include/asm-mips/mach-generic/irq.h linux-2.6.17-owrt/include/asm-mips/mach-generic/irq.h
---- linux-2.6.17/include/asm-mips/mach-generic/irq.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-mips/mach-generic/irq.h 2006-06-18 12:44:28.000000000 +0200
-@@ -8,6 +8,6 @@
- #ifndef __ASM_MACH_GENERIC_IRQ_H
+diff -Nur linux-2.6.21.1/include/asm-mips/mach-generic/irq.h linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h
+--- linux-2.6.21.1/include/asm-mips/mach-generic/irq.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h 2007-05-23 23:35:55.000000000 +0200
+@@ -9,7 +9,7 @@
#define __ASM_MACH_GENERIC_IRQ_H
+ #ifndef NR_IRQS
-#define NR_IRQS 128
+#define NR_IRQS 256
+ #endif
- #endif /* __ASM_MACH_GENERIC_IRQ_H */
-diff -Nur linux-2.6.17/include/linux/kernel.h linux-2.6.17-owrt/include/linux/kernel.h
---- linux-2.6.17/include/linux/kernel.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/linux/kernel.h 2006-06-18 12:44:28.000000000 +0200
-@@ -329,6 +329,7 @@
+ #ifdef CONFIG_I8259
+diff -Nur linux-2.6.21.1/include/linux/kernel.h linux-2.6.21.1-owrt/include/linux/kernel.h
+--- linux-2.6.21.1/include/linux/kernel.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1-owrt/include/linux/kernel.h 2007-05-23 23:34:01.000000000 +0200
+@@ -334,6 +334,7 @@
};
/* Force a compilation error if condition is true */
+extern void BUILD_BUG(void);
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
- /* Trap pasters of __FUNCTION__ at compile-time */
+ /* Force a compilation error if condition is true, but also produce a
+diff -Nur linux-2.6.21.1/include/linux/kernel.h.orig linux-2.6.21.1-owrt/include/linux/kernel.h.orig
+--- linux-2.6.21.1/include/linux/kernel.h.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/include/linux/kernel.h.orig 2007-04-27 23:49:26.000000000 +0200
+@@ -0,0 +1,355 @@
++#ifndef _LINUX_KERNEL_H
++#define _LINUX_KERNEL_H
++
++/*
++ * 'kernel.h' contains some often-used function prototypes etc
++ */
++
++#ifdef __KERNEL__
++
++#include <stdarg.h>
++#include <linux/linkage.h>
++#include <linux/stddef.h>
++#include <linux/types.h>
++#include <linux/compiler.h>
++#include <linux/bitops.h>
++#include <linux/log2.h>
++#include <asm/byteorder.h>
++#include <asm/bug.h>
++
++extern const char linux_banner[];
++extern const char linux_proc_banner[];
++
++#define INT_MAX ((int)(~0U>>1))
++#define INT_MIN (-INT_MAX - 1)
++#define UINT_MAX (~0U)
++#define LONG_MAX ((long)(~0UL>>1))
++#define LONG_MIN (-LONG_MAX - 1)
++#define ULONG_MAX (~0UL)
++#define LLONG_MAX ((long long)(~0ULL>>1))
++#define LLONG_MIN (-LLONG_MAX - 1)
++#define ULLONG_MAX (~0ULL)
++
++#define STACK_MAGIC 0xdeadbeef
++
++#define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1)
++#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
++
++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
++#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
++#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
++#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
++
++#define KERN_EMERG "<0>" /* system is unusable */
++#define KERN_ALERT "<1>" /* action must be taken immediately */
++#define KERN_CRIT "<2>" /* critical conditions */
++#define KERN_ERR "<3>" /* error conditions */
++#define KERN_WARNING "<4>" /* warning conditions */
++#define KERN_NOTICE "<5>" /* normal but significant condition */
++#define KERN_INFO "<6>" /* informational */
++#define KERN_DEBUG "<7>" /* debug-level messages */
++
++extern int console_printk[];
++
++#define console_loglevel (console_printk[0])
++#define default_message_loglevel (console_printk[1])
++#define minimum_console_loglevel (console_printk[2])
++#define default_console_loglevel (console_printk[3])
++
++struct completion;
++struct pt_regs;
++struct user;
++
++/**
++ * might_sleep - annotation for functions that can sleep
++ *
++ * this macro will print a stack trace if it is executed in an atomic
++ * context (spinlock, irq-handler, ...).
++ *
++ * This is a useful debugging help to be able to catch problems early and not
++ * be bitten later when the calling function happens to sleep when it is not
++ * supposed to.
++ */
++#ifdef CONFIG_PREEMPT_VOLUNTARY
++extern int cond_resched(void);
++# define might_resched() cond_resched()
++#else
++# define might_resched() do { } while (0)
++#endif
++
++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
++ void __might_sleep(char *file, int line);
++# define might_sleep() \
++ do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
++#else
++# define might_sleep() do { might_resched(); } while (0)
++#endif
++
++#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
++
++#define abs(x) ({ \
++ int __x = (x); \
++ (__x < 0) ? -__x : __x; \
++ })
++
++extern struct atomic_notifier_head panic_notifier_list;
++extern long (*panic_blink)(long time);
++NORET_TYPE void panic(const char * fmt, ...)
++ __attribute__ ((NORET_AND format (printf, 1, 2)));
++extern void oops_enter(void);
++extern void oops_exit(void);
++extern int oops_may_print(void);
++fastcall NORET_TYPE void do_exit(long error_code)
++ ATTRIB_NORET;
++NORET_TYPE void complete_and_exit(struct completion *, long)
++ ATTRIB_NORET;
++extern unsigned long simple_strtoul(const char *,char **,unsigned int);
++extern long simple_strtol(const char *,char **,unsigned int);
++extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
++extern long long simple_strtoll(const char *,char **,unsigned int);
++extern int sprintf(char * buf, const char * fmt, ...)
++ __attribute__ ((format (printf, 2, 3)));
++extern int vsprintf(char *buf, const char *, va_list)
++ __attribute__ ((format (printf, 2, 0)));
++extern int snprintf(char * buf, size_t size, const char * fmt, ...)
++ __attribute__ ((format (printf, 3, 4)));
++extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
++ __attribute__ ((format (printf, 3, 0)));
++extern int scnprintf(char * buf, size_t size, const char * fmt, ...)
++ __attribute__ ((format (printf, 3, 4)));
++extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
++ __attribute__ ((format (printf, 3, 0)));
++extern char *kasprintf(gfp_t gfp, const char *fmt, ...)
++ __attribute__ ((format (printf, 2, 3)));
++
++extern int sscanf(const char *, const char *, ...)
++ __attribute__ ((format (scanf, 2, 3)));
++extern int vsscanf(const char *, const char *, va_list)
++ __attribute__ ((format (scanf, 2, 0)));
++
++extern int get_option(char **str, int *pint);
++extern char *get_options(const char *str, int nints, int *ints);
++extern unsigned long long memparse(char *ptr, char **retptr);
++
++extern int core_kernel_text(unsigned long addr);
++extern int __kernel_text_address(unsigned long addr);
++extern int kernel_text_address(unsigned long addr);
++struct pid;
++extern struct pid *session_of_pgrp(struct pid *pgrp);
++
++extern void dump_thread(struct pt_regs *regs, struct user *dump);
++
++#ifdef CONFIG_PRINTK
++asmlinkage int vprintk(const char *fmt, va_list args)
++ __attribute__ ((format (printf, 1, 0)));
++asmlinkage int printk(const char * fmt, ...)
++ __attribute__ ((format (printf, 1, 2)));
++#else
++static inline int vprintk(const char *s, va_list args)
++ __attribute__ ((format (printf, 1, 0)));
++static inline int vprintk(const char *s, va_list args) { return 0; }
++static inline int printk(const char *s, ...)
++ __attribute__ ((format (printf, 1, 2)));
++static inline int printk(const char *s, ...) { return 0; }
++#endif
++
++unsigned long int_sqrt(unsigned long);
++
++extern int printk_ratelimit(void);
++extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
++extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
++ unsigned int interval_msec);
++
++static inline void console_silent(void)
++{
++ console_loglevel = 0;
++}
++
++static inline void console_verbose(void)
++{
++ if (console_loglevel)
++ console_loglevel = 15;
++}
++
++extern void bust_spinlocks(int yes);
++extern void wake_up_klogd(void);
++extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
++extern int panic_timeout;
++extern int panic_on_oops;
++extern int panic_on_unrecovered_nmi;
++extern int tainted;
++extern const char *print_tainted(void);
++extern void add_taint(unsigned);
++
++/* Values used for system_state */
++extern enum system_states {
++ SYSTEM_BOOTING,
++ SYSTEM_RUNNING,
++ SYSTEM_HALT,
++ SYSTEM_POWER_OFF,
++ SYSTEM_RESTART,
++ SYSTEM_SUSPEND_DISK,
++} system_state;
++
++#define TAINT_PROPRIETARY_MODULE (1<<0)
++#define TAINT_FORCED_MODULE (1<<1)
++#define TAINT_UNSAFE_SMP (1<<2)
++#define TAINT_FORCED_RMMOD (1<<3)
++#define TAINT_MACHINE_CHECK (1<<4)
++#define TAINT_BAD_PAGE (1<<5)
++#define TAINT_USER (1<<6)
++
++extern void dump_stack(void);
++
++#ifdef DEBUG
++/* If you are writing a driver, please use dev_dbg instead */
++#define pr_debug(fmt,arg...) \
++ printk(KERN_DEBUG fmt,##arg)
++#else
++static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...)
++{
++ return 0;
++}
++#endif
++
++#define pr_info(fmt,arg...) \
++ printk(KERN_INFO fmt,##arg)
++
++/*
++ * Display an IP address in readable format.
++ */
++
++#define NIPQUAD(addr) \
++ ((unsigned char *)&addr)[0], \
++ ((unsigned char *)&addr)[1], \
++ ((unsigned char *)&addr)[2], \
++ ((unsigned char *)&addr)[3]
++#define NIPQUAD_FMT "%u.%u.%u.%u"
++
++#define NIP6(addr) \
++ ntohs((addr).s6_addr16[0]), \
++ ntohs((addr).s6_addr16[1]), \
++ ntohs((addr).s6_addr16[2]), \
++ ntohs((addr).s6_addr16[3]), \
++ ntohs((addr).s6_addr16[4]), \
++ ntohs((addr).s6_addr16[5]), \
++ ntohs((addr).s6_addr16[6]), \
++ ntohs((addr).s6_addr16[7])
++#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
++#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
++
++#if defined(__LITTLE_ENDIAN)
++#define HIPQUAD(addr) \
++ ((unsigned char *)&addr)[3], \
++ ((unsigned char *)&addr)[2], \
++ ((unsigned char *)&addr)[1], \
++ ((unsigned char *)&addr)[0]
++#elif defined(__BIG_ENDIAN)
++#define HIPQUAD NIPQUAD
++#else
++#error "Please fix asm/byteorder.h"
++#endif /* __LITTLE_ENDIAN */
++
++/*
++ * min()/max() macros that also do
++ * strict type-checking.. See the
++ * "unnecessary" pointer comparison.
++ */
++#define min(x,y) ({ \
++ typeof(x) _x = (x); \
++ typeof(y) _y = (y); \
++ (void) (&_x == &_y); \
++ _x < _y ? _x : _y; })
++
++#define max(x,y) ({ \
++ typeof(x) _x = (x); \
++ typeof(y) _y = (y); \
++ (void) (&_x == &_y); \
++ _x > _y ? _x : _y; })
++
++/*
++ * ..and if you can't take the strict
++ * types, you can specify one yourself.
++ *
++ * Or not use min/max at all, of course.
++ */
++#define min_t(type,x,y) \
++ ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
++#define max_t(type,x,y) \
++ ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
++
++
++/**
++ * container_of - cast a member of a structure out to the containing structure
++ * @ptr: the pointer to the member.
++ * @type: the type of the container struct this is embedded in.
++ * @member: the name of the member within the struct.
++ *
++ */
++#define container_of(ptr, type, member) ({ \
++ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
++ (type *)( (char *)__mptr - offsetof(type,member) );})
++
++/*
++ * Check at compile time that something is of a particular type.
++ * Always evaluates to 1 so you may use it easily in comparisons.
++ */
++#define typecheck(type,x) \
++({ type __dummy; \
++ typeof(x) __dummy2; \
++ (void)(&__dummy == &__dummy2); \
++ 1; \
++})
++
++/*
++ * Check at compile time that 'function' is a certain type, or is a pointer
++ * to that type (needs to use typedef for the function type.)
++ */
++#define typecheck_fn(type,function) \
++({ typeof(type) __tmp = function; \
++ (void)__tmp; \
++})
++
++struct sysinfo;
++extern int do_sysinfo(struct sysinfo *info);
++
++#endif /* __KERNEL__ */
++
++#define SI_LOAD_SHIFT 16
++struct sysinfo {
++ long uptime; /* Seconds since boot */
++ unsigned long loads[3]; /* 1, 5, and 15 minute load averages */
++ unsigned long totalram; /* Total usable main memory size */
++ unsigned long freeram; /* Available memory size */
++ unsigned long sharedram; /* Amount of shared memory */
++ unsigned long bufferram; /* Memory used by buffers */
++ unsigned long totalswap; /* Total swap space size */
++ unsigned long freeswap; /* swap space still available */
++ unsigned short procs; /* Number of current processes */
++ unsigned short pad; /* explicit padding for m68k */
++ unsigned long totalhigh; /* Total high memory size */
++ unsigned long freehigh; /* Available high memory size */
++ unsigned int mem_unit; /* Memory unit size in bytes */
++ char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */
++};
++
++/* Force a compilation error if condition is true */
++#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
++
++/* Force a compilation error if condition is true, but also produce a
++ result (of value 0 and type size_t), so the expression can be used
++ e.g. in a structure initializer (or where-ever else comma expressions
++ aren't permitted). */
++#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1)
++
++/* Trap pasters of __FUNCTION__ at compile-time */
++#define __FUNCTION__ (__func__)
++
++/* This helps us to avoid #ifdef CONFIG_NUMA */
++#ifdef CONFIG_NUMA
++#define NUMA_BUILD 1
++#else
++#define NUMA_BUILD 0
++#endif
++
++#endif
diff --git a/target/linux/generic-2.6/config-template b/target/linux/generic-2.6/config-template
index 164048a8d..1c1d57077 100644
--- a/target/linux/generic-2.6/config-template
+++ b/target/linux/generic-2.6/config-template
@@ -1343,6 +1343,7 @@ CONFIG_USB_EZUSB=y
CONFIG_USB_KAWETH=m
# CONFIG_USB_KBD is not set
# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LD is not set
@@ -1356,6 +1357,7 @@ CONFIG_USB_KAWETH=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_NET1080=m
@@ -1380,6 +1382,7 @@ CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
+# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m