summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/config-3.3228
-rw-r--r--target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c294
-rw-r--r--target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch24
-rw-r--r--target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch151
-rw-r--r--target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch103
-rw-r--r--target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch62
-rw-r--r--target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch80
-rw-r--r--target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch318
-rw-r--r--target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch266
-rw-r--r--target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch132
-rw-r--r--target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch37
-rw-r--r--target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch219
-rw-r--r--target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch134
-rw-r--r--target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch75
-rw-r--r--target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch213
-rw-r--r--target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch63
-rw-r--r--target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch143
-rw-r--r--target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch435
-rw-r--r--target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch164
-rw-r--r--target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch85
-rw-r--r--target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch33
-rw-r--r--target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch77
-rw-r--r--target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch52
-rw-r--r--target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch54
-rw-r--r--target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch120
-rw-r--r--target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch194
-rw-r--r--target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch98
-rw-r--r--target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch154
-rw-r--r--target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch190
-rw-r--r--target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch56
-rw-r--r--target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch112
-rw-r--r--target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch107
-rw-r--r--target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch62
-rw-r--r--target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch58
-rw-r--r--target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch213
-rw-r--r--target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch41
-rw-r--r--target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch42
-rw-r--r--target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch20
-rw-r--r--target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch30
-rw-r--r--target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch56
-rw-r--r--target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch98
-rw-r--r--target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch164
-rw-r--r--target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch105
-rw-r--r--target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch27
-rw-r--r--target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch12
-rw-r--r--target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch18
-rw-r--r--target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch94
-rw-r--r--target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch29
-rw-r--r--target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch69
-rw-r--r--target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch25
-rw-r--r--target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch34
-rw-r--r--target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch112
-rw-r--r--target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch28
-rw-r--r--target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch24
-rw-r--r--target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch19
-rw-r--r--target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch22
-rw-r--r--target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch81
-rw-r--r--target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch37
-rw-r--r--target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch45
-rw-r--r--target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch47
-rw-r--r--target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch86
-rw-r--r--target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch55
-rw-r--r--target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch57
-rw-r--r--target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch11
-rw-r--r--target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch14
-rw-r--r--target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch231
-rw-r--r--target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch60
-rw-r--r--target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch240
-rw-r--r--target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch128
-rw-r--r--target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch220
-rw-r--r--target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch153
-rw-r--r--target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch109
-rw-r--r--target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch187
-rw-r--r--target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch679
-rw-r--r--target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch40
-rw-r--r--target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch23
-rw-r--r--target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch49
-rw-r--r--target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch20
-rw-r--r--target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch117
97 files changed, 9049 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3
new file mode 100644
index 000000000..8788789d7
--- /dev/null
+++ b/target/linux/ar71xx/config-3.3
@@ -0,0 +1,228 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_AP113=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP81=y
+CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PB92=y
+CONFIG_ATH79_MACH_RB4XX=y
+CONFIG_ATH79_MACH_RB750=y
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WNDR3700=y
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+# CONFIG_ATH79_WDT is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LANTIQ is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_RB750 is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_RB4XX is not set
+# CONFIG_SPI_RB4XX_CPLD is not set
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
new file mode 100644
index 000000000..b41eb5481
--- /dev/null
+++ b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
@@ -0,0 +1,294 @@
+/*
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This driver was base on: net/dsa/mv88e6060.c
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+
+#define REG_BASE 0x10
+#define REG_PHY(p) (REG_BASE + (p))
+#define REG_PORT(p) (REG_BASE + 8 + (p))
+#define REG_GLOBAL (REG_BASE + 0x0f)
+#define NUM_PORTS 7
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ return mdiobus_read(ds->master_mii_bus, addr, reg);
+}
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ return mdiobus_write(ds->master_mii_bus, addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+
+ ret = mdiobus_read(bus, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
+ if (ret == 0x1530)
+ return "Marvell 88E6063";
+ }
+
+ return NULL;
+}
+
+static int mv88e6063_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ /*
+ * Set all ports to the disabled state.
+ */
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /*
+ * Wait for transmit queues to drain.
+ */
+ msleep(2);
+
+ /*
+ * Reset the switch.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+ /*
+ * Wait up to one second for reset to complete.
+ */
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0x8000) == 0x0000)
+ break;
+
+ msleep(1);
+ }
+ if (i == 1000)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6063_setup_global(struct dsa_switch *ds)
+{
+ /*
+ * Disable discarding of frames with excessive collisions,
+ * set the maximum frame size to 1536 bytes, and mask all
+ * interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+ /*
+ * Enable automatic address learning, set the address
+ * database size to 1024 entries, and set the default aging
+ * time to 5 minutes.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+ return 0;
+}
+
+static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /*
+ * Do not force flow control, disable Ingress and Egress
+ * Header tagging, disable VLAN tunneling, and set the port
+ * state to Forwarding. Additionally, if this is the CPU
+ * port, enable Ingress and Egress Trailer tagging mode.
+ */
+ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
+
+ /*
+ * Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ (1 << ds->dst->cpu_port)));
+
+ /*
+ * Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ return 0;
+}
+
+static int mv88e6063_setup(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ ret = mv88e6063_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise atu */
+
+ ret = mv88e6063_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = mv88e6063_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
+static int mv88e6063_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= NUM_PORTS)
+ return REG_PHY(port);
+ return -1;
+}
+
+static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6063_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int uninitialized_var(port_status);
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = reg_read(ds, REG_PORT(i), 0x00);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & 0x1000);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ speed = (port_status & 0x0100) ? 100 : 10;
+ duplex = (port_status & 0x0200) ? 1 : 0;
+ fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+ "flow control %sabled\n", dev->name,
+ speed, duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static struct dsa_switch_driver mv88e6063_switch_driver = {
+ .tag_protocol = htons(ETH_P_TRAILER),
+ .probe = mv88e6063_probe,
+ .setup = mv88e6063_setup,
+ .set_addr = mv88e6063_set_addr,
+ .phy_read = mv88e6063_phy_read,
+ .phy_write = mv88e6063_phy_write,
+ .poll_link = mv88e6063_poll_link,
+};
+
+static int __init mv88e6063_init(void)
+{
+ register_switch_driver(&mv88e6063_switch_driver);
+ return 0;
+}
+module_init(mv88e6063_init);
+
+static void __exit mv88e6063_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6063_switch_driver);
+}
+module_exit(mv88e6063_cleanup);
diff --git a/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch
new file mode 100644
index 000000000..df6e3e11a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch
@@ -0,0 +1,24 @@
+From cf6855546330c3d349d41496975f32255bb6fd07 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:02:57 +0100
+Subject: [PATCH 01/35] MIPS: ath79: avoid a kernel bug on AR913X
+
+Wireless mac registration causes a BUG on AR913X SoCs due to
+a missing 'else'.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/dev-wmac.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_
+ {
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+- if (soc_is_ar933x())
++ else if (soc_is_ar933x())
+ ar933x_wmac_setup();
+ else
+ BUG();
diff --git a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch
new file mode 100644
index 000000000..547f4fbd2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch
@@ -0,0 +1,151 @@
+From c98b48027516a2e71688a5957e4e0120f4aa8c61 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 09:47:44 +0100
+Subject: [PATCH 02/35] MIPS: ath79: separate common PCI code
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The 'pcibios_map_irq' and 'pcibios_plat_dev_init'
+are common functions and only instance one of them
+can be present in a single kernel.
+
+Currently these functions can be built only if the
+CONFIG_SOC_AR724X option is selected. However the
+ath79 platform contain support for the AR71XX SoCs,.
+The AR71XX SoCs have a differnet PCI controller,
+and those will require a different code.
+
+Move the common PCI code into a separeate file in
+order to be able to use that with other SoCs as
+well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/ath79/Makefile | 1 +
+ arch/mips/ath79/pci.c | 46 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c | 34 -------------------------------
+ 3 files changed, 47 insertions(+), 34 deletions(-)
+ create mode 100644 arch/mips/ath79/pci.c
+
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -11,6 +11,7 @@
+ obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++obj-$(CONFIG_PCI) += pci.o
+
+ #
+ # Devices
+--- /dev/null
++++ b/arch/mips/ath79/pci.c
+@@ -0,0 +1,46 @@
++/*
++ * Atheros AR71XX/AR724X specific PCI setup code
++ *
++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <asm/mach-ath79/pci-ath724x.h>
++
++static struct ath724x_pci_data *pci_data;
++static int pci_data_size;
++
++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
++{
++ pci_data = data;
++ pci_data_size = size;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
++{
++ unsigned int devfn = dev->devfn;
++ int irq = -1;
++
++ if (devfn > pci_data_size - 1)
++ return irq;
++
++ irq = pci_data[devfn].irq;
++
++ return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ unsigned int devfn = dev->devfn;
++
++ if (devfn > pci_data_size - 1)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ dev->dev.platform_data = pci_data[devfn].pdata;
++
++ return PCIBIOS_SUCCESSFUL;
++}
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -9,7 +9,6 @@
+ */
+
+ #include <linux/pci.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
+
+ #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+@@ -19,8 +18,6 @@
+ #define ATH724X_PCI_MEM_SIZE 0x08000000
+
+ static DEFINE_SPINLOCK(ath724x_pci_lock);
+-static struct ath724x_pci_data *pci_data;
+-static int pci_data_size;
+
+ static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+@@ -133,37 +130,6 @@ static struct pci_controller ath724x_pci
+ .mem_resource = &ath724x_mem_resource,
+ };
+
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+-{
+- pci_data = data;
+- pci_data_size = size;
+-}
+-
+-int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+-{
+- unsigned int devfn = dev->devfn;
+- int irq = -1;
+-
+- if (devfn > pci_data_size - 1)
+- return irq;
+-
+- irq = pci_data[devfn].irq;
+-
+- return irq;
+-}
+-
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+- unsigned int devfn = dev->devfn;
+-
+- if (devfn > pci_data_size - 1)
+- return PCIBIOS_DEVICE_NOT_FOUND;
+-
+- dev->dev.platform_data = pci_data[devfn].pdata;
+-
+- return PCIBIOS_SUCCESSFUL;
+-}
+-
+ static int __init ath724x_pcibios_init(void)
+ {
+ register_pci_controller(&ath724x_pci_controller);
diff --git a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch
new file mode 100644
index 000000000..a5c25b19b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch
@@ -0,0 +1,103 @@
+From 204fd70abd99099f6c2e2213a2baa1d51c03a039 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 09:50:50 +0100
+Subject: [PATCH 03/35] MIPS: ath79: rename pci-ath724x.h
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The declared function in this header file is used by the
+ath79 platform code only. Move the header to the platform
+directory.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - move include "pci.h" out of the #ifdef CONFIG_PCI section
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 2 +-
+ arch/mips/ath79/pci.c | 2 +-
+ arch/mips/ath79/pci.h | 21 +++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 ---------------------
+ 4 files changed, 23 insertions(+), 23 deletions(-)
+ create mode 100644 arch/mips/ath79/pci.h
+ delete mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -15,13 +15,13 @@
+
+ #ifdef CONFIG_PCI
+ #include <linux/ath9k_platform.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
+ #endif /* CONFIG_PCI */
+
+ #include "machtypes.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
++#include "pci.h"
+
+ #define UBNT_XM_GPIO_LED_L1 0
+ #define UBNT_XM_GPIO_LED_L2 1
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -9,7 +9,7 @@
+ */
+
+ #include <linux/pci.h>
+-#include <asm/mach-ath79/pci-ath724x.h>
++#include "pci.h"
+
+ static struct ath724x_pci_data *pci_data;
+ static int pci_data_size;
+--- /dev/null
++++ b/arch/mips/ath79/pci.h
+@@ -0,0 +1,21 @@
++/*
++ * Atheros 724x PCI support
++ *
++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
++#define __ASM_MACH_ATH79_PCI_ATH724X_H
++
++struct ath724x_pci_data {
++ int irq;
++ void *pdata;
++};
++
++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
++
++#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+--- a/arch/mips/include/asm/mach-ath79/pci-ath724x.h
++++ /dev/null
+@@ -1,21 +0,0 @@
+-/*
+- * Atheros 724x PCI support
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+-#define __ASM_MACH_ATH79_PCI_ATH724X_H
+-
+-struct ath724x_pci_data {
+- int irq;
+- void *pdata;
+-};
+-
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+-
+-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
diff --git a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
new file mode 100644
index 000000000..42fa5c8a4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
@@ -0,0 +1,62 @@
+From 7e59b95e3424c078de0d75d699433da0dd289fc1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 10:13:37 +0100
+Subject: [PATCH 04/35] MIPS: ath79: make ath724x_pcibios_init visible for external code
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René Bolldorf <xsecute@googlemail.com>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v4: - add a sob tag
+v3: - no changes
+v2: - fix a typo in my e-mail address
+---
+ arch/mips/include/asm/mach-ath79/pci.h | 20 ++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c | 3 ++-
+ 2 files changed, 22 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-ath79/pci.h
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -0,0 +1,20 @@
++/*
++ * Atheros 724x PCI support
++ *
++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PCI_H
++#define __ASM_MACH_ATH79_PCI_H
++
++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
++int ath724x_pcibios_init(void);
++#else
++static inline int ath724x_pcibios_init(void) { return 0 };
++#endif
++
++#endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -9,6 +9,7 @@
+ */
+
+ #include <linux/pci.h>
++#include <asm/mach-ath79/pci.h>
+
+ #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+@@ -130,7 +131,7 @@ static struct pci_controller ath724x_pci
+ .mem_resource = &ath724x_mem_resource,
+ };
+
+-static int __init ath724x_pcibios_init(void)
++int __init ath724x_pcibios_init(void)
+ {
+ register_pci_controller(&ath724x_pci_controller);
+
diff --git a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch
new file mode 100644
index 000000000..1b52f25e5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch
@@ -0,0 +1,80 @@
+From fbf38a9b03d0c47ed602f090ebb2d8ecc0d51d04 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 10:25:26 +0100
+Subject: [PATCH 05/35] MIPS: ath79: add a common PCI registration function
+
+The current code unconditionally registers the AR724X
+specific PCI controller, even if the kernel is running
+on a different SoC.
+
+Add a common function for PCI controller registration,
+and only register the AR724X PCI controller if the kernel
+is running on an AR724X SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v4: - simplify ath79_register_pci function
+v3: - fix compile error if CONFIG_PCI is not defined
+ - add __init annotation to ath79_register_pci
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 1 +
+ arch/mips/ath79/pci.c | 10 ++++++++++
+ arch/mips/ath79/pci.h | 6 ++++++
+ arch/mips/pci/pci-ath724x.c | 2 --
+ 4 files changed, 17 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -111,6 +111,7 @@ static void __init ubnt_xm_init(void)
+ ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ #endif /* CONFIG_PCI */
+
++ ath79_register_pci();
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -9,6 +9,8 @@
+ */
+
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+
+ static struct ath724x_pci_data *pci_data;
+@@ -44,3 +46,11 @@ int pcibios_plat_dev_init(struct pci_dev
+
+ return PCIBIOS_SUCCESSFUL;
+ }
++
++int __init ath79_register_pci(void)
++{
++ if (soc_is_ar724x())
++ return ath724x_pcibios_init();
++
++ return -ENODEV;
++}
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -18,4 +18,10 @@ struct ath724x_pci_data {
+
+ void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+
++#ifdef CONFIG_PCI
++int ath79_register_pci(void);
++#else
++static inline int ath79_register_pci(void) { return 0; }
++#endif
++
+ #endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+--- a/arch/mips/pci/pci-ath724x.c
++++ b/arch/mips/pci/pci-ath724x.c
+@@ -137,5 +137,3 @@ int __init ath724x_pcibios_init(void)
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+-
+-arch_initcall(ath724x_pcibios_init);
diff --git a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
new file mode 100644
index 000000000..55adff0a7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
@@ -0,0 +1,318 @@
+From 9510a9988638ae2386277a832fab2df8ca37d75a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:07:26 +0100
+Subject: [PATCH 06/35] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v4: - no changes
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/pci/Makefile | 2 +-
+ arch/mips/pci/pci-ar724x.c | 139 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-ath724x.c | 139 -------------------------------------------
+ 3 files changed, 140 insertions(+), 140 deletions(-)
+ create mode 100644 arch/mips/pci/pci-ar724x.c
+ delete mode 100644 arch/mips/pci/pci-ath724x.c
+
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+-obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o
++obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+--- /dev/null
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -0,0 +1,139 @@
++/*
++ * Atheros 724x PCI support
++ *
++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <asm/mach-ath79/pci.h>
++
++#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
++#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
++
++#define ATH724X_PCI_DEV_BASE 0x14000000
++#define ATH724X_PCI_MEM_BASE 0x10000000
++#define ATH724X_PCI_MEM_SIZE 0x08000000
++
++static DEFINE_SPINLOCK(ath724x_pci_lock);
++
++static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++ int size, uint32_t *value)
++{
++ unsigned long flags, addr, tval, mask;
++
++ if (devfn)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ if (where & (size - 1))
++ return PCIBIOS_BAD_REGISTER_NUMBER;
++
++ spin_lock_irqsave(&ath724x_pci_lock, flags);
++
++ switch (size) {
++ case 1:
++ addr = where & ~3;
++ mask = 0xff000000 >> ((where % 4) * 8);
++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++ tval = tval & ~mask;
++ *value = (tval >> ((4 - (where % 4))*8));
++ break;
++ case 2:
++ addr = where & ~3;
++ mask = 0xffff0000 >> ((where % 4)*8);
++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++ tval = tval & ~mask;
++ *value = (tval >> ((4 - (where % 4))*8));
++ break;
++ case 4:
++ *value = reg_read(ATH724X_PCI_DEV_BASE + where);
++ break;
++ default:
++ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++ return PCIBIOS_BAD_REGISTER_NUMBER;
++ }
++
++ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
++ int size, uint32_t value)
++{
++ unsigned long flags, tval, addr, mask;
++
++ if (devfn)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ if (where & (size - 1))
++ return PCIBIOS_BAD_REGISTER_NUMBER;
++
++ spin_lock_irqsave(&ath724x_pci_lock, flags);
++
++ switch (size) {
++ case 1:
++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++ mask = 0xff000000 >> ((where % 4)*8);
++ tval = reg_read(addr);
++ tval = tval & ~mask;
++ tval |= (value << ((4 - (where % 4))*8)) & mask;
++ reg_write(addr, tval);
++ break;
++ case 2:
++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++ mask = 0xffff0000 >> ((where % 4)*8);
++ tval = reg_read(addr);
++ tval = tval & ~mask;
++ tval |= (value << ((4 - (where % 4))*8)) & mask;
++ reg_write(addr, tval);
++ break;
++ case 4:
++ reg_write((ATH724X_PCI_DEV_BASE + where), value);
++ break;
++ default:
++ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++ return PCIBIOS_BAD_REGISTER_NUMBER;
++ }
++
++ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops ath724x_pci_ops = {
++ .read = ath724x_pci_read,
++ .write = ath724x_pci_write,
++};
++
++static struct resource ath724x_io_resource = {
++ .name = "PCI IO space",
++ .start = 0,
++ .end = 0,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ath724x_mem_resource = {
++ .name = "PCI memory space",
++ .start = ATH724X_PCI_MEM_BASE,
++ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct pci_controller ath724x_pci_controller = {
++ .pci_ops = &ath724x_pci_ops,
++ .io_resource = &ath724x_io_resource,
++ .mem_resource = &ath724x_mem_resource,
++};
++
++int __init ath724x_pcibios_init(void)
++{
++ register_pci_controller(&ath724x_pci_controller);
++
++ return PCIBIOS_SUCCESSFUL;
++}
+--- a/arch/mips/pci/pci-ath724x.c
++++ /dev/null
+@@ -1,139 +0,0 @@
+-/*
+- * Atheros 724x PCI support
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/pci.h>
+-#include <asm/mach-ath79/pci.h>
+-
+-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+-
+-#define ATH724X_PCI_DEV_BASE 0x14000000
+-#define ATH724X_PCI_MEM_BASE 0x10000000
+-#define ATH724X_PCI_MEM_SIZE 0x08000000
+-
+-static DEFINE_SPINLOCK(ath724x_pci_lock);
+-
+-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+- int size, uint32_t *value)
+-{
+- unsigned long flags, addr, tval, mask;
+-
+- if (devfn)
+- return PCIBIOS_DEVICE_NOT_FOUND;
+-
+- if (where & (size - 1))
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+- spin_lock_irqsave(&ath724x_pci_lock, flags);
+-
+- switch (size) {
+- case 1:
+- addr = where & ~3;
+- mask = 0xff000000 >> ((where % 4) * 8);
+- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+- tval = tval & ~mask;
+- *value = (tval >> ((4 - (where % 4))*8));
+- break;
+- case 2:
+- addr = where & ~3;
+- mask = 0xffff0000 >> ((where % 4)*8);
+- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+- tval = tval & ~mask;
+- *value = (tval >> ((4 - (where % 4))*8));
+- break;
+- case 4:
+- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+- break;
+- default:
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+- }
+-
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+- return PCIBIOS_SUCCESSFUL;
+-}
+-
+-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+- int size, uint32_t value)
+-{
+- unsigned long flags, tval, addr, mask;
+-
+- if (devfn)
+- return PCIBIOS_DEVICE_NOT_FOUND;
+-
+- if (where & (size - 1))
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+- spin_lock_irqsave(&ath724x_pci_lock, flags);
+-
+- switch (size) {
+- case 1:
+- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+- mask = 0xff000000 >> ((where % 4)*8);
+- tval = reg_read(addr);
+- tval = tval & ~mask;
+- tval |= (value << ((4 - (where % 4))*8)) & mask;
+- reg_write(addr, tval);
+- break;
+- case 2:
+- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+- mask = 0xffff0000 >> ((where % 4)*8);
+- tval = reg_read(addr);
+- tval = tval & ~mask;
+- tval |= (value << ((4 - (where % 4))*8)) & mask;
+- reg_write(addr, tval);
+- break;
+- case 4:
+- reg_write((ATH724X_PCI_DEV_BASE + where), value);
+- break;
+- default:
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+- }
+-
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+-
+- return PCIBIOS_SUCCESSFUL;
+-}
+-
+-static struct pci_ops ath724x_pci_ops = {
+- .read = ath724x_pci_read,
+- .write = ath724x_pci_write,
+-};
+-
+-static struct resource ath724x_io_resource = {
+- .name = "PCI IO space",
+- .start = 0,
+- .end = 0,
+- .flags = IORESOURCE_IO,
+-};
+-
+-static struct resource ath724x_mem_resource = {
+- .name = "PCI memory space",
+- .start = ATH724X_PCI_MEM_BASE,
+- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+- .flags = IORESOURCE_MEM,
+-};
+-
+-static struct pci_controller ath724x_pci_controller = {
+- .pci_ops = &ath724x_pci_ops,
+- .io_resource = &ath724x_io_resource,
+- .mem_resource = &ath724x_mem_resource,
+-};
+-
+-int __init ath724x_pcibios_init(void)
+-{
+- register_pci_controller(&ath724x_pci_controller);
+-
+- return PCIBIOS_SUCCESSFUL;
+-}
diff --git a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch
new file mode 100644
index 000000000..7e5df9f0d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch
@@ -0,0 +1,266 @@
+From 0cbee5634678ffbd10bee9e302d013392dd8289e Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:16:33 +0100
+Subject: [PATCH 07/35] MIPS: ath79: replace ath724x to ar724x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Replace the 'ath724x' to 'ar724x' in function, variable and
+structure names to reflect the name of the real SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+ - refreshed due to the changes in a previous patch
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 4 +-
+ arch/mips/ath79/pci.c | 6 ++--
+ arch/mips/ath79/pci.h | 10 +++---
+ arch/mips/include/asm/mach-ath79/pci.h | 4 +-
+ arch/mips/pci/pci-ar724x.c | 62 ++++++++++++++++----------------
+ 5 files changed, 43 insertions(+), 43 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -84,7 +84,7 @@ static struct ath79_spi_platform_data ub
+ #ifdef CONFIG_PCI
+ static struct ath9k_platform_data ubnt_xm_eeprom_data;
+
+-static struct ath724x_pci_data ubnt_xm_pci_data[] = {
++static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+ {
+ .irq = UBNT_XM_PCI_IRQ,
+ .pdata = &ubnt_xm_eeprom_data,
+@@ -108,7 +108,7 @@ static void __init ubnt_xm_init(void)
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+- ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ #endif /* CONFIG_PCI */
+
+ ath79_register_pci();
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,10 +13,10 @@
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+
+-static struct ath724x_pci_data *pci_data;
++static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
+
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+ {
+ pci_data = data;
+ pci_data_size = size;
+@@ -50,7 +50,7 @@ int pcibios_plat_dev_init(struct pci_dev
+ int __init ath79_register_pci(void)
+ {
+ if (soc_is_ar724x())
+- return ath724x_pcibios_init();
++ return ar724x_pcibios_init();
+
+ return -ENODEV;
+ }
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -8,15 +8,15 @@
+ * by the Free Software Foundation.
+ */
+
+-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+-#define __ASM_MACH_ATH79_PCI_ATH724X_H
++#ifndef _ATH79_PCI_H
++#define _ATH79_PCI_H
+
+-struct ath724x_pci_data {
++struct ar724x_pci_data {
+ int irq;
+ void *pdata;
+ };
+
+-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+
+ #ifdef CONFIG_PCI
+ int ath79_register_pci(void);
+@@ -24,4 +24,4 @@ int ath79_register_pci(void);
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
+
+-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
++#endif /* _ATH79_PCI_H */
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -12,9 +12,9 @@
+ #define __ASM_MACH_ATH79_PCI_H
+
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+-int ath724x_pcibios_init(void);
++int ar724x_pcibios_init(void);
+ #else
+-static inline int ath724x_pcibios_init(void) { return 0 };
++static inline int ar724x_pcibios_init(void) { return 0 };
+ #endif
+
+ #endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -14,13 +14,13 @@
+ #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+ #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+
+-#define ATH724X_PCI_DEV_BASE 0x14000000
+-#define ATH724X_PCI_MEM_BASE 0x10000000
+-#define ATH724X_PCI_MEM_SIZE 0x08000000
++#define AR724X_PCI_DEV_BASE 0x14000000
++#define AR724X_PCI_MEM_BASE 0x10000000
++#define AR724X_PCI_MEM_SIZE 0x08000000
+
+-static DEFINE_SPINLOCK(ath724x_pci_lock);
++static DEFINE_SPINLOCK(ar724x_pci_lock);
+
+-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
+ unsigned long flags, addr, tval, mask;
+@@ -31,38 +31,38 @@ static int ath724x_pci_read(struct pci_b
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+- spin_lock_irqsave(&ath724x_pci_lock, flags);
++ spin_lock_irqsave(&ar724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4) * 8);
+- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 2:
+ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
++ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 4:
+- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
++ *value = reg_read(AR724X_PCI_DEV_BASE + where);
+ break;
+ default:
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
++static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+ {
+ unsigned long flags, tval, addr, mask;
+@@ -73,11 +73,11 @@ static int ath724x_pci_write(struct pci_
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+- spin_lock_irqsave(&ath724x_pci_lock, flags);
++ spin_lock_irqsave(&ar724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xff000000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+@@ -85,7 +85,7 @@ static int ath724x_pci_write(struct pci_
+ reg_write(addr, tval);
+ break;
+ case 2:
+- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
++ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+@@ -93,47 +93,47 @@ static int ath724x_pci_write(struct pci_
+ reg_write(addr, tval);
+ break;
+ case 4:
+- reg_write((ATH724X_PCI_DEV_BASE + where), value);
++ reg_write((AR724X_PCI_DEV_BASE + where), value);
+ break;
+ default:
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
++ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static struct pci_ops ath724x_pci_ops = {
+- .read = ath724x_pci_read,
+- .write = ath724x_pci_write,
++static struct pci_ops ar724x_pci_ops = {
++ .read = ar724x_pci_read,
++ .write = ar724x_pci_write,
+ };
+
+-static struct resource ath724x_io_resource = {
++static struct resource ar724x_io_resource = {
+ .name = "PCI IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO,
+ };
+
+-static struct resource ath724x_mem_resource = {
++static struct resource ar724x_mem_resource = {
+ .name = "PCI memory space",
+- .start = ATH724X_PCI_MEM_BASE,
+- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
++ .start = AR724X_PCI_MEM_BASE,
++ .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ };
+
+-static struct pci_controller ath724x_pci_controller = {
+- .pci_ops = &ath724x_pci_ops,
+- .io_resource = &ath724x_io_resource,
+- .mem_resource = &ath724x_mem_resource,
++static struct pci_controller ar724x_pci_controller = {
++ .pci_ops = &ar724x_pci_ops,
++ .io_resource = &ar724x_io_resource,
++ .mem_resource = &ar724x_mem_resource,
+ };
+
+-int __init ath724x_pcibios_init(void)
++int __init ar724x_pcibios_init(void)
+ {
+- register_pci_controller(&ath724x_pci_controller);
++ register_pci_controller(&ar724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
new file mode 100644
index 000000000..adc7f1871
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
@@ -0,0 +1,132 @@
+From db464f2ad82c03f847d8eabbb8251b5c567e6720 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 11:52:41 +0100
+Subject: [PATCH 08/35] MIPS: ath79: use io-accessor macros in pci-ar724x.c
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: René Bolldorf <xsecute@googlemail.com>
+
+v4: - add an Acked-by tag from René
+v3: - no changes
+v2: - no changes
+---
+ arch/mips/pci/pci-ar724x.c | 38 ++++++++++++++++++++++++--------------
+ 1 files changed, 24 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -11,19 +11,19 @@
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/pci.h>
+
+-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+-
+-#define AR724X_PCI_DEV_BASE 0x14000000
++#define AR724X_PCI_CFG_BASE 0x14000000
++#define AR724X_PCI_CFG_SIZE 0x1000
+ #define AR724X_PCI_MEM_BASE 0x10000000
+ #define AR724X_PCI_MEM_SIZE 0x08000000
+
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
++static void __iomem *ar724x_pci_devcfg_base;
+
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
+ unsigned long flags, addr, tval, mask;
++ void __iomem *base;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -31,25 +31,27 @@ static int ar724x_pci_read(struct pci_bu
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
++ base = ar724x_pci_devcfg_base;
++
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4) * 8);
+- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
++ tval = __raw_readl(base + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 2:
+ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
++ tval = __raw_readl(base + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 4:
+- *value = reg_read(AR724X_PCI_DEV_BASE + where);
++ *value = __raw_readl(base + where);
+ break;
+ default:
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -66,6 +68,7 @@ static int ar724x_pci_write(struct pci_b
+ int size, uint32_t value)
+ {
+ unsigned long flags, tval, addr, mask;
++ void __iomem *base;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -73,27 +76,29 @@ static int ar724x_pci_write(struct pci_b
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
++ base = ar724x_pci_devcfg_base;
++
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
++ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4)*8);
+- tval = reg_read(addr);
++ tval = __raw_readl(base + addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+- reg_write(addr, tval);
++ __raw_writel(tval, base + addr);
+ break;
+ case 2:
+- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
++ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+- tval = reg_read(addr);
++ tval = __raw_readl(base + addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+- reg_write(addr, tval);
++ __raw_writel(tval, base + addr);
+ break;
+ case 4:
+- reg_write((AR724X_PCI_DEV_BASE + where), value);
++ __raw_writel(value, (base + where));
+ break;
+ default:
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -133,6 +138,11 @@ static struct pci_controller ar724x_pci_
+
+ int __init ar724x_pcibios_init(void)
+ {
++ ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
++ AR724X_PCI_CFG_SIZE);
++ if (ar724x_pci_devcfg_base == NULL)
++ return -ENOMEM;
++
+ register_pci_controller(&ar724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
new file mode 100644
index 000000000..1fb03c6cd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
@@ -0,0 +1,37 @@
+From 744ffdd4e90cd6671f46eadf9d7cf55b07618d73 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 21:37:17 +0100
+Subject: [PATCH 09/35] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c
+
+The alignment of the 'where' parameters are checked
+in the core PCI code already.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/pci/pci-ar724x.c | 6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -28,9 +28,6 @@ static int ar724x_pci_read(struct pci_bu
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+- if (where & (size - 1))
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+ base = ar724x_pci_devcfg_base;
+
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
+@@ -73,9 +70,6 @@ static int ar724x_pci_write(struct pci_b
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+- if (where & (size - 1))
+- return PCIBIOS_BAD_REGISTER_NUMBER;
+-
+ base = ar724x_pci_devcfg_base;
+
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
new file mode 100644
index 000000000..c3637e8ec
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
@@ -0,0 +1,219 @@
+From 2e535c334018d58b0bf6df583486abda5bfb2003 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 18 Nov 2011 22:25:30 +0100
+Subject: [PATCH 10/35] MIPS: ath79: fix broken ar724x_pci_{read,write} functions
+
+The current ar724x_pci_{read,write} functions are
+broken. Due to that, pci_read_config_byte returns
+with bogus values, and pci_write_config_{byte,word}
+unconditionally clears the accessed PCI configuration
+registers instead of changing the value of them.
+
+The patch fixes the broken functions, thus the PCI
+configuration space can be accessed correctly.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+Output of 'lspci -vv' without the patch:
+
+00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
+Network Adapter (PCI-Express) (rev 01)
+ Subsystem: Atheros Communications Inc. Device a091
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 0
+ Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
+ Capabilities: [40] Power Management version 3
+ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
+ Address: 00000000 Data: 0000
+ Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+ ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 512 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
+ ClockPM- Surprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ DevCap2: Completion Timeout: Not Supported, TimeoutDis+
+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
+ LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+ Compliance De-emphasis: -6dB
+ LnkSta2: Current De-emphasis Level: -6dB
+
+Output of 'lspci -vv' with the patch:
+
+00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
+Network Adapter (PCI-Express) (rev 01)
+ Subsystem: Atheros Communications Inc. Device a091
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 48
+ Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
+ Capabilities: [40] Power Management version 3
+ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
+ Address: 00000000 Data: 0000
+ Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
+ ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 512 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
+ ClockPM- Surprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ DevCap2: Completion Timeout: Not Supported, TimeoutDis+
+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
+ LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+ Compliance De-emphasis: -6dB
+ LnkSta2: Current De-emphasis Level: -6dB
+ Capabilities: [100 v1] Advanced Error Reporting
+ UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
+ Capabilities: [140 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
+ Status: NegoPending- InProgress-
+ Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
+ Capabilities: [170 v1] Power Budgeting <?>
+---
+ arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++----------------------
+ 1 files changed, 26 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
+- unsigned long flags, addr, tval, mask;
++ unsigned long flags;
+ void __iomem *base;
++ u32 data;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu
+ base = ar724x_pci_devcfg_base;
+
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
++ data = __raw_readl(base + (where & ~3));
+
+ switch (size) {
+ case 1:
+- addr = where & ~3;
+- mask = 0xff000000 >> ((where % 4) * 8);
+- tval = __raw_readl(base + addr);
+- tval = tval & ~mask;
+- *value = (tval >> ((4 - (where % 4))*8));
++ if (where & 1)
++ data >>= 8;
++ if (where & 2)
++ data >>= 16;
++ data &= 0xff;
+ break;
+ case 2:
+- addr = where & ~3;
+- mask = 0xffff0000 >> ((where % 4)*8);
+- tval = __raw_readl(base + addr);
+- tval = tval & ~mask;
+- *value = (tval >> ((4 - (where % 4))*8));
++ if (where & 2)
++ data >>= 16;
++ data &= 0xffff;
+ break;
+ case 4:
+- *value = __raw_readl(base + where);
+ break;
+ default:
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu
+ }
+
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++ *value = data;
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu
+ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+ {
+- unsigned long flags, tval, addr, mask;
++ unsigned long flags;
+ void __iomem *base;
++ u32 data;
++ int s;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b
+ base = ar724x_pci_devcfg_base;
+
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
++ data = __raw_readl(base + (where & ~3));
+
+ switch (size) {
+ case 1:
+- addr = where & ~3;
+- mask = 0xff000000 >> ((where % 4)*8);
+- tval = __raw_readl(base + addr);
+- tval = tval & ~mask;
+- tval |= (value << ((4 - (where % 4))*8)) & mask;
+- __raw_writel(tval, base + addr);
++ s = ((where & 3) * 8);
++ data &= ~(0xff << s);
++ data |= ((value & 0xff) << s);
+ break;
+ case 2:
+- addr = where & ~3;
+- mask = 0xffff0000 >> ((where % 4)*8);
+- tval = __raw_readl(base + addr);
+- tval = tval & ~mask;
+- tval |= (value << ((4 - (where % 4))*8)) & mask;
+- __raw_writel(tval, base + addr);
++ s = ((where & 2) * 8);
++ data &= ~(0xffff << s);
++ data |= ((value & 0xffff) << s);
+ break;
+ case 4:
+- __raw_writel(value, (base + where));
++ data = value;
+ break;
+ default:
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
++ __raw_writel(data, base + (where & ~3));
++ /* flush write */
++ __raw_readl(base + (where & ~3));
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
diff --git a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
new file mode 100644
index 000000000..11391abe6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
@@ -0,0 +1,134 @@
+From b2ee3bd8706521c9bbf43405c767010927c101e5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 21 Nov 2011 17:57:51 +0100
+Subject: [PATCH 11/35] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs
+
+The PCI controller of the AR724X SoCs has a hardware
+bag. If the BAR0 register of the PCI device is set to
+the proper base address, the memory address space of
+the device is not accessible.
+
+When the device driver tries to access the memory
+address space of the PCI device, it leads to data
+bus error, similiar to this:
+
+Data bus error, epc == 801f69a0, ra == 801f698c
+Oops[#1]:
+Cpu 0
+$ 0 : 00000000 00000061 deadbeef 000000ff
+$ 4 : 00000000 000000ff 00000014 00000000
+$ 8 : ff000000 fffffffc 00000000 00000000
+$12 : 000001f5 00000006 00000000 6e637920
+$16 : 81ca4000 81ca0260 81ca4000 804d70f0
+$20 : fffffff4 0000002b 803ad4c4 00000000
+$24 : 00000003 00000000
+$28 : 81c20000 81c21c60 00000000 801f698c
+Hi : 00000000
+Lo : 00000000
+epc : 801f69a0 ath9k_hw_init+0xd0/0xa70
+ Not tainted
+ra : 801f698c ath9k_hw_init+0xbc/0xa70
+Status: 1000c103 KERNEL EXL IE
+Cause : 1080001c
+PrId : 00019374 (MIPS 24Kc)
+Modules linked in:
+Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
+Stack : 00000000 00000000 00000000 00000000 81c21c78 81ca0260 00000000 804d70f0
+ 81ca0260 81c21cc0 81ca0e80 81ca0260 81ca4000 804d70f0 fffffff4 0000002b
+ 803ad4c4 00000000 00000000 801e3ae8 81c9d080 81ca0e80 b0000000 800b9b9c
+ 00000008 81c9d000 8031aeb0 802d38a0 00000000 81c14c00 81c14c60 00000000
+ 81ca0e80 81ca0260 b0000000 801f08a4 81c9c820 81c21d48 81c9c820 80144320
+ ...
+Call Trace:
+[<801f69a0>] ath9k_hw_init+0xd0/0xa70
+[<801e3ae8>] ath9k_init_device+0x174/0x680
+[<801f08a4>] ath_pci_probe+0x27c/0x380
+[<8019e490>] pci_device_probe+0x74/0x9c
+[<801bfadc>] driver_probe_device+0x9c/0x1b4
+[<801bfcb0>] __driver_attach+0xbc/0xc4
+[<801bea0c>] bus_for_each_dev+0x5c/0x98
+[<801bf394>] bus_add_driver+0x1d0/0x2a4
+[<801c0364>] driver_register+0x8c/0x16c
+[<8019e72c>] __pci_register_driver+0x4c/0xe4
+[<803d3d40>] ath9k_init+0x3c/0x88
+[<80060930>] do_one_initcall+0x3c/0x1cc
+[<803c297c>] kernel_init+0xa4/0x138
+[<80063c04>] kernel_thread_helper+0x10/0x18
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - apply the workaround on AR7240 only
+ - remove unrelated defines
+---
+ arch/mips/pci/pci-ar724x.c | 36 +++++++++++++++++++++++++++++++++++-
+ 1 files changed, 35 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -9,6 +9,7 @@
+ */
+
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/pci.h>
+
+ #define AR724X_PCI_CFG_BASE 0x14000000
+@@ -16,9 +17,14 @@
+ #define AR724X_PCI_MEM_BASE 0x10000000
+ #define AR724X_PCI_MEM_SIZE 0x08000000
+
++#define AR7240_BAR0_WAR_VALUE 0xffff
++
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
+ static void __iomem *ar724x_pci_devcfg_base;
+
++static u32 ar724x_pci_bar0_value;
++static bool ar724x_pci_bar0_is_cached;
++
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
+@@ -56,7 +62,14 @@ static int ar724x_pci_read(struct pci_bu
+ }
+
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+- *value = data;
++
++ if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
++ ar724x_pci_bar0_is_cached) {
++ /* use the cached value */
++ *value = ar724x_pci_bar0_value;
++ } else {
++ *value = data;
++ }
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+@@ -72,6 +85,27 @@ static int ar724x_pci_write(struct pci_b
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
++ if (soc_is_ar7240() && where == PCI_BASE_ADDRESS_0 && size == 4) {
++ if (value != 0xffffffff) {
++ /*
++ * WAR for a hw issue. If the BAR0 register of the
++ * device is set to the proper base address, the
++ * memory space of the device is not accessible.
++ *
++ * Cache the intended value so it can be read back,
++ * and write a SoC specific constant value to the
++ * BAR0 register in order to make the device memory
++ * accessible.
++ */
++ ar724x_pci_bar0_is_cached = true;
++ ar724x_pci_bar0_value = value;
++
++ value = AR7240_BAR0_WAR_VALUE;
++ } else {
++ ar724x_pci_bar0_is_cached = false;
++ }
++ }
++
+ base = ar724x_pci_devcfg_base;
+
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
diff --git a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch
new file mode 100644
index 000000000..ccb721d36
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch
@@ -0,0 +1,75 @@
+From cfb725275ea25857e8f0e3bf358fff7c84cc787c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 13:59:39 +0100
+Subject: [PATCH 12/35] MIPS: ath79: fix a wrong IRQ number
+
+The Ubiquiti XM board setup code uses an invalid
+IRQ number, because it if above of NR_IRQS. This
+leads to failed 'request_irq' calls:
+
+ ath9k 0000:00:00.0: request_irq failed
+ ath9k: probe of 0000:00:00.0 failed with error -22
+
+Preserve some IRQ numbers for the built-in IRQ
+controller of PCI host controllers in the
+AR71XX/AR724X SoCs, and use the correct IRQ
+number in the board setup code.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+The IRQ controller code is also missing, that will be
+added in a separate patch.
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 5 +++--
+ arch/mips/include/asm/mach-ath79/irq.h | 6 +++++-
+ 2 files changed, 8 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -17,6 +17,8 @@
+ #include <linux/ath9k_platform.h>
+ #endif /* CONFIG_PCI */
+
++#include <asm/mach-ath79/irq.h>
++
+ #include "machtypes.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+@@ -33,7 +35,6 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL 20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+-#define UBNT_XM_PCI_IRQ 48
+ #define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
+
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_x
+
+ static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+ {
+- .irq = UBNT_XM_PCI_IRQ,
++ .irq = ATH79_PCI_IRQ(0),
+ .pdata = &ubnt_xm_eeprom_data,
+ },
+ };
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -10,11 +10,15 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+
+ #define MIPS_CPU_IRQ_BASE 0
+-#define NR_IRQS 40
++#define NR_IRQS 46
+
+ #define ATH79_MISC_IRQ_BASE 8
+ #define ATH79_MISC_IRQ_COUNT 32
+
++#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
++#define ATH79_PCI_IRQ_COUNT 6
++#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
++
+ #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
+ #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
+ #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
new file mode 100644
index 000000000..6da2df499
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
@@ -0,0 +1,213 @@
+From a4fbc2dec67a5d760e25e3c3a6c392191a5405c6 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 14:11:19 +0100
+Subject: [PATCH 13/35] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs
+
+The PCI Host Controller of the AR724x SoC has a
+built-in IRQ controller. The current code does
+not supports that, so the IRQ lines wired to this
+controller are not usable. This leads to failed
+'request_irq' calls:
+
+ ath9k 0000:00:00.0: request_irq failed
+ ath9k: probe of 0000:00:00.0 failed with error -89
+
+This patch adds support for the IRQ controller
+in order to make PCI IRQs work.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - move the interrupt controller related defines from
+ the workaround patch
+---
+ arch/mips/ath79/pci.c | 3 +-
+ arch/mips/include/asm/mach-ath79/pci.h | 4 +-
+ arch/mips/pci/pci-ar724x.c | 118 +++++++++++++++++++++++++++++++-
+ 3 files changed, 120 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -10,6 +10,7 @@
+
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/irq.h>
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+
+@@ -50,7 +51,7 @@ int pcibios_plat_dev_init(struct pci_dev
+ int __init ath79_register_pci(void)
+ {
+ if (soc_is_ar724x())
+- return ar724x_pcibios_init();
++ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+
+ return -ENODEV;
+ }
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -12,9 +12,9 @@
+ #define __ASM_MACH_ATH79_PCI_H
+
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+-int ar724x_pcibios_init(void);
++int ar724x_pcibios_init(int irq);
+ #else
+-static inline int ar724x_pcibios_init(void) { return 0 };
++static inline int ar724x_pcibios_init(int irq) { return 0 };
+ #endif
+
+ #endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -8,19 +8,32 @@
+ * by the Free Software Foundation.
+ */
+
++#include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/pci.h>
+
+ #define AR724X_PCI_CFG_BASE 0x14000000
+ #define AR724X_PCI_CFG_SIZE 0x1000
++#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
++#define AR724X_PCI_CTRL_SIZE 0x100
++
+ #define AR724X_PCI_MEM_BASE 0x10000000
+ #define AR724X_PCI_MEM_SIZE 0x08000000
+
++#define AR724X_PCI_REG_INT_STATUS 0x4c
++#define AR724X_PCI_REG_INT_MASK 0x50
++
++#define AR724X_PCI_INT_DEV0 BIT(14)
++
++#define AR724X_PCI_IRQ_COUNT 1
++
+ #define AR7240_BAR0_WAR_VALUE 0xffff
+
+ static DEFINE_SPINLOCK(ar724x_pci_lock);
+ static void __iomem *ar724x_pci_devcfg_base;
++static void __iomem *ar724x_pci_ctrl_base;
+
+ static u32 ar724x_pci_bar0_value;
+ static bool ar724x_pci_bar0_is_cached;
+@@ -164,14 +177,115 @@ static struct pci_controller ar724x_pci_
+ .mem_resource = &ar724x_mem_resource,
+ };
+
+-int __init ar724x_pcibios_init(void)
++static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++ void __iomem *base;
++ u32 pending;
++
++ base = ar724x_pci_ctrl_base;
++
++ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
++ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++
++ if (pending & AR724X_PCI_INT_DEV0)
++ generic_handle_irq(ATH79_PCI_IRQ(0));
++
++ else
++ spurious_interrupt();
++}
++
++static void ar724x_pci_irq_unmask(struct irq_data *d)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ar724x_pci_ctrl_base;
++
++ switch (d->irq) {
++ case ATH79_PCI_IRQ(0):
++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++ __raw_writel(t | AR724X_PCI_INT_DEV0,
++ base + AR724X_PCI_REG_INT_MASK);
++ /* flush write */
++ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++ }
++}
++
++static void ar724x_pci_irq_mask(struct irq_data *d)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ar724x_pci_ctrl_base;
++
++ switch (d->irq) {
++ case ATH79_PCI_IRQ(0):
++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
++ base + AR724X_PCI_REG_INT_MASK);
++
++ /* flush write */
++ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++
++ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
++ __raw_writel(t | AR724X_PCI_INT_DEV0,
++ base + AR724X_PCI_REG_INT_STATUS);
++
++ /* flush write */
++ __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
++ }
++}
++
++static struct irq_chip ar724x_pci_irq_chip = {
++ .name = "AR724X PCI ",
++ .irq_mask = ar724x_pci_irq_mask,
++ .irq_unmask = ar724x_pci_irq_unmask,
++ .irq_mask_ack = ar724x_pci_irq_mask,
++};
++
++static void __init ar724x_pci_irq_init(int irq)
++{
++ void __iomem *base;
++ int i;
++
++ base = ar724x_pci_ctrl_base;
++
++ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
++ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
++
++ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
++
++ for (i = ATH79_PCI_IRQ_BASE;
++ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
++ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
++ handle_level_irq);
++
++ irq_set_chained_handler(irq, ar724x_pci_irq_handler);
++}
++
++int __init ar724x_pcibios_init(int irq)
+ {
++ int ret;
++
++ ret = -ENOMEM;
++
+ ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CFG_SIZE);
+ if (ar724x_pci_devcfg_base == NULL)
+- return -ENOMEM;
++ goto err;
+
++ ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
++ AR724X_PCI_CTRL_SIZE);
++ if (ar724x_pci_ctrl_base == NULL)
++ goto err_unmap_devcfg;
++
++ ar724x_pci_irq_init(irq);
+ register_pci_controller(&ar724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
++
++err_unmap_devcfg:
++ iounmap(ar724x_pci_devcfg_base);
++err:
++ return ret;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
new file mode 100644
index 000000000..17776ada9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
@@ -0,0 +1,63 @@
+From adeefb0860e92f44c7d66d5fccdb217fccfb8a81 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 10:19:08 +0100
+Subject: [PATCH 14/35] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c
+
+Remove a superfluous ifdef around an include. Also
+reorganize the board setup code a bit, so another
+ifdef can be removed.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 23 ++++++++++++-----------
+ 1 files changed, 12 insertions(+), 11 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -12,10 +12,7 @@
+
+ #include <linux/init.h>
+ #include <linux/pci.h>
+-
+-#ifdef CONFIG_PCI
+ #include <linux/ath9k_platform.h>
+-#endif /* CONFIG_PCI */
+
+ #include <asm/mach-ath79/irq.h>
+
+@@ -91,6 +88,17 @@ static struct ar724x_pci_data ubnt_xm_pc
+ .pdata = &ubnt_xm_eeprom_data,
+ },
+ };
++
++static void __init ubnt_xm_pci_init(void)
++{
++ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
++ sizeof(ubnt_xm_eeprom_data.eeprom_data));
++
++ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++ ath79_register_pci();
++}
++#else
++static inline void ubnt_xm_pci_init(void) {}
+ #endif /* CONFIG_PCI */
+
+ static void __init ubnt_xm_init(void)
+@@ -105,14 +113,7 @@ static void __init ubnt_xm_init(void)
+ ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+ ARRAY_SIZE(ubnt_xm_spi_info));
+
+-#ifdef CONFIG_PCI
+- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+- sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+-#endif /* CONFIG_PCI */
+-
+- ath79_register_pci();
++ ubnt_xm_pci_init();
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
new file mode 100644
index 000000000..91430a4a1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
@@ -0,0 +1,143 @@
+From 83d74abc7d549f5d6292b0474be080983239c0bd Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 10:29:36 +0100
+Subject: [PATCH 15/35] MIPS: ath79: allow to use board specific pci_plat_dev_init functions
+
+Th current implementation causes NULL pointer dereference
+if 'pci_data' is not set:
+
+pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
+pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI
+address [0x10000000-0x1000ffff])
+CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4
+Oops[#1]:
+Cpu 0
+$ 0 : 00000000 80420000 00000000 00000000
+$ 4 : 00000000 00000000 00000001 00000001
+$ 8 : 00000001 0000032c 81c54700 00000001
+$12 : 0000032d 0000000f 00000000 ffffffff
+$16 : 81c14c00 00000001 802dac74 80195f98
+$20 : 802ea050 00000000 00000000 00000000
+$24 : 00000003 800617f0
+$28 : 81c20000 81c21e70 00000000 802e78a4
+Hi : 00000000
+Lo : 4190ab00
+epc : 802daca0 0x802daca0
+ Not tainted
+ra : 802e78a4 0x802e78a4
+Status: 1000c003 KERNEL EXL IE
+Cause : 00800008
+BadVA : 00000000
+PrId : 00019374 (MIPS 24Kc)
+Modules linked in:
+Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
+Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000
+ 802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290
+ 80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000
+ 00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000
+ 00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000
+
+This can be avoided by calling the 'ar724x_pci_add_data'
+function from the board specific setup code. However it
+makes no sense to use that function for every board,
+especially when the board does not needs to set the
+platform_data field of any PCI device.
+
+The patch allows the board setup code to specify a board
+specific function if that is required.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+
+The pci_irq_map function can throw another NULL pointer
+dereference, that will be fixed in a subsequent patch.
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 13 ++++++++++++-
+ arch/mips/ath79/pci.c | 14 ++++++++------
+ arch/mips/ath79/pci.h | 4 +++-
+ 3 files changed, 23 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -85,16 +85,27 @@ static struct ath9k_platform_data ubnt_x
+ static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+ {
+ .irq = ATH79_PCI_IRQ(0),
+- .pdata = &ubnt_xm_eeprom_data,
+ },
+ };
+
++static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
++{
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0:
++ dev->dev.platform_data = &ubnt_xm_eeprom_data;
++ break;
++ }
++
++ return 0;
++}
++
+ static void __init ubnt_xm_pci_init(void)
+ {
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
++ ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+ ath79_register_pci();
+ }
+ #else
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -14,6 +14,7 @@
+ #include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+
++static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+ static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
+
+@@ -38,14 +39,15 @@ int __init pcibios_map_irq(const struct
+
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
+- unsigned int devfn = dev->devfn;
+-
+- if (devfn > pci_data_size - 1)
+- return PCIBIOS_DEVICE_NOT_FOUND;
++ if (ath79_pci_plat_dev_init)
++ return ath79_pci_plat_dev_init(dev);
+
+- dev->dev.platform_data = pci_data[devfn].pdata;
++ return 0;
++}
+
+- return PCIBIOS_SUCCESSFUL;
++void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
++{
++ ath79_pci_plat_dev_init = func;
+ }
+
+ int __init ath79_register_pci(void)
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -13,14 +13,16 @@
+
+ struct ar724x_pci_data {
+ int irq;
+- void *pdata;
+ };
+
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+
+ #ifdef CONFIG_PCI
++void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+ int ath79_register_pci(void);
+ #else
++static inline void
++ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
+
diff --git a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
new file mode 100644
index 000000000..78e8bd56c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
@@ -0,0 +1,435 @@
+From 9f6d46372cf2a493eaeeffbefe0a796379f838fa Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 22:54:32 +0100
+Subject: [PATCH 16/35] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs
+
+The Atheros AR71XX SoCs have a built-in PCI Host Controller.
+This patch adds a driver for that, and modifies the relevant
+files in order to allow to register the PCI controller from
+board specific setup.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+v2: - add missing pci-ar71xx.c
+---
+ arch/mips/ath79/Kconfig | 1 +
+ arch/mips/include/asm/mach-ath79/pci.h | 6 +
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-ar71xx.c | 375 ++++++++++++++++++++++++++++++++
+ 4 files changed, 383 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/pci/pci-ar71xx.c
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -52,6 +52,7 @@ endmenu
+ config SOC_AR71XX
+ select USB_ARCH_HAS_EHCI
+ select USB_ARCH_HAS_OHCI
++ select HW_HAS_PCI
+ def_bool n
+
+ config SOC_AR724X
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -11,6 +11,12 @@
+ #ifndef __ASM_MACH_ATH79_PCI_H
+ #define __ASM_MACH_ATH79_PCI_H
+
++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
++int ar71xx_pcibios_init(void);
++#else
++static inline int ar71xx_pcibios_init(void) { return 0 };
++#endif
++
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
++obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+ obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
+
+ #
+--- /dev/null
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -0,0 +1,375 @@
++/*
++ * Atheros AR71xx PCI host controller driver
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/resource.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/bitops.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/pci.h>
++
++#define AR71XX_PCI_MEM_BASE 0x10000000
++#define AR71XX_PCI_MEM_SIZE 0x08000000
++
++#define AR71XX_PCI_WIN0_OFFS 0x10000000
++#define AR71XX_PCI_WIN1_OFFS 0x11000000
++#define AR71XX_PCI_WIN2_OFFS 0x12000000
++#define AR71XX_PCI_WIN3_OFFS 0x13000000
++#define AR71XX_PCI_WIN4_OFFS 0x14000000
++#define AR71XX_PCI_WIN5_OFFS 0x15000000
++#define AR71XX_PCI_WIN6_OFFS 0x16000000
++#define AR71XX_PCI_WIN7_OFFS 0x07000000
++
++#define AR71XX_PCI_CFG_BASE \
++ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
++#define AR71XX_PCI_CFG_SIZE 0x100
++
++#define AR71XX_PCI_REG_CRP_AD_CBE 0x00
++#define AR71XX_PCI_REG_CRP_WRDATA 0x04
++#define AR71XX_PCI_REG_CRP_RDDATA 0x08
++#define AR71XX_PCI_REG_CFG_AD 0x0c
++#define AR71XX_PCI_REG_CFG_CBE 0x10
++#define AR71XX_PCI_REG_CFG_WRDATA 0x14
++#define AR71XX_PCI_REG_CFG_RDDATA 0x18
++#define AR71XX_PCI_REG_PCI_ERR 0x1c
++#define AR71XX_PCI_REG_PCI_ERR_ADDR 0x20
++#define AR71XX_PCI_REG_AHB_ERR 0x24
++#define AR71XX_PCI_REG_AHB_ERR_ADDR 0x28
++
++#define AR71XX_PCI_CRP_CMD_WRITE 0x00010000
++#define AR71XX_PCI_CRP_CMD_READ 0x00000000
++#define AR71XX_PCI_CFG_CMD_READ 0x0000000a
++#define AR71XX_PCI_CFG_CMD_WRITE 0x0000000b
++
++#define AR71XX_PCI_INT_CORE BIT(4)
++#define AR71XX_PCI_INT_DEV2 BIT(2)
++#define AR71XX_PCI_INT_DEV1 BIT(1)
++#define AR71XX_PCI_INT_DEV0 BIT(0)
++
++#define AR71XX_PCI_IRQ_COUNT 5
++
++static DEFINE_SPINLOCK(ar71xx_pci_lock);
++static void __iomem *ar71xx_pcicfg_base;
++
++/* Byte lane enable bits */
++static const u8 ar71xx_pci_ble_table[4][4] = {
++ {0x0, 0xf, 0xf, 0xf},
++ {0xe, 0xd, 0xb, 0x7},
++ {0xc, 0xf, 0x3, 0xf},
++ {0xf, 0xf, 0xf, 0xf},
++};
++
++static const u32 ar71xx_pci_read_mask[8] = {
++ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
++};
++
++static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
++{
++ u32 t;
++
++ t = ar71xx_pci_ble_table[size & 3][where & 3];
++ BUG_ON(t == 0xf);
++ t <<= (local) ? 20 : 4;
++
++ return t;
++}
++
++static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
++ int where)
++{
++ u32 ret;
++
++ if (!bus->number) {
++ /* type 0 */
++ ret = (1 << PCI_SLOT(devfn)) | (PCI_FUNC(devfn) << 8) |
++ (where & ~3);
++ } else {
++ /* type 1 */
++ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) |
++ (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
++ }
++
++ return ret;
++}
++
++static int ar71xx_pci_check_error(int quiet)
++{
++ void __iomem *base = ar71xx_pcicfg_base;
++ u32 pci_err;
++ u32 ahb_err;
++
++ pci_err = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR) & 3;
++ if (pci_err) {
++ if (!quiet) {
++ u32 addr;
++
++ addr = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR_ADDR);
++ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
++ "PCI", pci_err, addr);
++ }
++
++ /* clear PCI error status */
++ __raw_writel(pci_err, base + AR71XX_PCI_REG_PCI_ERR);
++ }
++
++ ahb_err = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR) & 1;
++ if (ahb_err) {
++ if (!quiet) {
++ u32 addr;
++
++ addr = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR_ADDR);
++ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
++ "AHB", ahb_err, addr);
++ }
++
++ /* clear AHB error status */
++ __raw_writel(ahb_err, base + AR71XX_PCI_REG_AHB_ERR);
++ }
++
++ return !!(ahb_err | pci_err);
++}
++
++static inline void ar71xx_pci_local_write(int where, int size, u32 value)
++{
++ void __iomem *base = ar71xx_pcicfg_base;
++ u32 ad_cbe;
++
++ value = value << (8 * (where & 3));
++
++ ad_cbe = AR71XX_PCI_CRP_CMD_WRITE | (where & ~3);
++ ad_cbe |= ar71xx_pci_get_ble(where, size, 1);
++
++ __raw_writel(ad_cbe, base + AR71XX_PCI_REG_CRP_AD_CBE);
++ __raw_writel(value, base + AR71XX_PCI_REG_CRP_WRDATA);
++}
++
++static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
++ unsigned int devfn,
++ int where, int size, u32 cmd)
++{
++ void __iomem *base = ar71xx_pcicfg_base;
++ u32 addr;
++
++ addr = ar71xx_pci_bus_addr(bus, devfn, where);
++
++ __raw_writel(addr, base + AR71XX_PCI_REG_CFG_AD);
++ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
++ base + AR71XX_PCI_REG_CFG_CBE);
++
++ return ar71xx_pci_check_error(1);
++}
++
++static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 *value)
++{
++ void __iomem *base = ar71xx_pcicfg_base;
++ unsigned long flags;
++ u32 data;
++ int err;
++ int ret;
++
++ ret = PCIBIOS_SUCCESSFUL;
++ data = ~0;
++
++ spin_lock_irqsave(&ar71xx_pci_lock, flags);
++
++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++ AR71XX_PCI_CFG_CMD_READ);
++ if (err)
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ else
++ data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
++
++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++ *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
++
++ return ret;
++}
++
++static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 value)
++{
++ void __iomem *base = ar71xx_pcicfg_base;
++ unsigned long flags;
++ int err;
++ int ret;
++
++ value = value << (8 * (where & 3));
++ ret = PCIBIOS_SUCCESSFUL;
++
++ spin_lock_irqsave(&ar71xx_pci_lock, flags);
++
++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++ AR71XX_PCI_CFG_CMD_WRITE);
++ if (err)
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ else
++ __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
++
++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++ return ret;
++}
++
++static struct pci_ops ar71xx_pci_ops = {
++ .read = ar71xx_pci_read_config,
++ .write = ar71xx_pci_write_config,
++};
++
++static struct resource ar71xx_pci_io_resource = {
++ .name = "PCI IO space",
++ .start = 0,
++ .end = 0,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ar71xx_pci_mem_resource = {
++ .name = "PCI memory space",
++ .start = AR71XX_PCI_MEM_BASE,
++ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
++ .flags = IORESOURCE_MEM
++};
++
++static struct pci_controller ar71xx_pci_controller = {
++ .pci_ops = &ar71xx_pci_ops,
++ .mem_resource = &ar71xx_pci_mem_resource,
++ .io_resource = &ar71xx_pci_io_resource,
++};
++
++static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++ void __iomem *base = ath79_reset_base;
++ u32 pending;
++
++ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++ if (pending & AR71XX_PCI_INT_DEV0)
++ generic_handle_irq(ATH79_PCI_IRQ(0));
++
++ else if (pending & AR71XX_PCI_INT_DEV1)
++ generic_handle_irq(ATH79_PCI_IRQ(1));
++
++ else if (pending & AR71XX_PCI_INT_DEV2)
++ generic_handle_irq(ATH79_PCI_IRQ(2));
++
++ else if (pending & AR71XX_PCI_INT_CORE)
++ generic_handle_irq(ATH79_PCI_IRQ(4));
++
++ else
++ spurious_interrupt();
++}
++
++static void ar71xx_pci_irq_unmask(struct irq_data *d)
++{
++ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
++ void __iomem *base = ath79_reset_base;
++ u32 t;
++
++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++ /* flush write */
++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++}
++
++static void ar71xx_pci_irq_mask(struct irq_data *d)
++{
++ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
++ void __iomem *base = ath79_reset_base;
++ u32 t;
++
++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++ /* flush write */
++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++}
++
++static struct irq_chip ar71xx_pci_irq_chip = {
++ .name = "AR71XX PCI",
++ .irq_mask = ar71xx_pci_irq_mask,
++ .irq_unmask = ar71xx_pci_irq_unmask,
++ .irq_mask_ack = ar71xx_pci_irq_mask,
++};
++
++static __init void ar71xx_pci_irq_init(void)
++{
++ void __iomem *base = ath79_reset_base;
++ int i;
++
++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
++
++ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
++
++ for (i = ATH79_PCI_IRQ_BASE;
++ i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
++ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
++ handle_level_irq);
++
++ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
++}
++
++static __init void ar71xx_pci_reset(void)
++{
++ void __iomem *ddr_base = ath79_ddr_base;
++
++ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
++ mdelay(100);
++
++ ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
++ mdelay(100);
++
++ __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
++ __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
++ __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
++ __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
++ __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
++ __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
++ __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
++ __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
++
++ mdelay(100);
++}
++
++__init int ar71xx_pcibios_init(void)
++{
++ u32 t;
++
++ ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
++ if (ar71xx_pcicfg_base == NULL)
++ return -ENOMEM;
++
++ ar71xx_pci_reset();
++
++ /* setup COMMAND register */
++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
++ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
++ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
++
++ /* clear bus errors */
++ ar71xx_pci_check_error(1);
++
++ ar71xx_pci_irq_init();
++
++ register_pci_controller(&ar71xx_pci_controller);
++
++ return 0;
++}
diff --git a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
new file mode 100644
index 000000000..251de55e5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
@@ -0,0 +1,164 @@
+From 8a1a5852aa7f8cfc027b2b0bb51cbbac4309e144 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 14:32:09 +0100
+Subject: [PATCH 17/35] MIPS: ath79: allow to use SoC specific PCI IRQ maps
+
+The PCI controllers in the AR71XX and in the
+AR724X SoCs are different, and both of them
+uses different IRQ wiring.
+
+The patch modifies the 'pcibios_map_irq' function
+in order to allow to use different IRQ maps for
+the different SoCs. The patch also adds a function,
+which lets the board setup code to override the
+default IRQ map.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++---
+ arch/mips/ath79/pci.h | 9 ++++++
+ 2 files changed, 77 insertions(+), 4 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -8,6 +8,7 @@
+ * by the Free Software Foundation.
+ */
+
++#include <linux/init.h>
+ #include <linux/pci.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+@@ -15,9 +16,35 @@
+ #include "pci.h"
+
+ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
++static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
++static unsigned ath79_pci_nr_irqs __initdata;
+ static struct ar724x_pci_data *pci_data;
+ static int pci_data_size;
+
++static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
++ {
++ .slot = 17,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(0),
++ }, {
++ .slot = 18,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(1),
++ }, {
++ .slot = 19,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(2),
++ }
++};
++
++static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
++ {
++ .slot = 0,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(0),
++ }
++};
++
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+ {
+ pci_data = data;
+@@ -26,13 +53,40 @@ void ar724x_pci_add_data(struct ar724x_p
+
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+- unsigned int devfn = dev->devfn;
+ int irq = -1;
++ int i;
+
+- if (devfn > pci_data_size - 1)
+- return irq;
+-
+- irq = pci_data[devfn].irq;
++ if (ath79_pci_nr_irqs == 0 ||
++ ath79_pci_irq_map == NULL) {
++ if (soc_is_ar71xx()) {
++ ath79_pci_irq_map = ar71xx_pci_irq_map;
++ ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
++ } else if (soc_is_ar724x()) {
++ ath79_pci_irq_map = ar724x_pci_irq_map;
++ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
++ } else {
++ pr_crit("pci %s: invalid irq map\n",
++ pci_name((struct pci_dev *) dev));
++ return irq;
++ }
++ }
++
++ for (i = 0; i < ath79_pci_nr_irqs; i++) {
++ const struct ath79_pci_irq *entry;
++
++ entry = &ath79_pci_irq_map[i];
++ if (entry->slot == slot && entry->pin == pin) {
++ irq = entry->irq;
++ break;
++ }
++ }
++
++ if (irq < 0)
++ pr_crit("pci %s: no irq found for pin %u\n",
++ pci_name((struct pci_dev *) dev), pin);
++ else
++ pr_info("pci %s: using irq %d for pin %u\n",
++ pci_name((struct pci_dev *) dev), irq, pin);
+
+ return irq;
+ }
+@@ -45,6 +99,13 @@ int pcibios_plat_dev_init(struct pci_dev
+ return 0;
+ }
+
++void __init ath79_pci_set_irq_map(unsigned nr_irqs,
++ const struct ath79_pci_irq *map)
++{
++ ath79_pci_nr_irqs = nr_irqs;
++ ath79_pci_irq_map = map;
++}
++
+ void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
+ {
+ ath79_pci_plat_dev_init = func;
+@@ -52,6 +113,9 @@ void __init ath79_pci_set_plat_dev_init(
+
+ int __init ath79_register_pci(void)
+ {
++ if (soc_is_ar71xx())
++ return ar71xx_pcibios_init();
++
+ if (soc_is_ar724x())
+ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -15,13 +15,22 @@ struct ar724x_pci_data {
+ int irq;
+ };
+
++struct ath79_pci_irq {
++ u8 slot;
++ u8 pin;
++ int irq;
++};
++
+ void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+
+ #ifdef CONFIG_PCI
++void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+ void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+ int ath79_register_pci(void);
+ #else
+ static inline void
++ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
++static inline void
+ ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+ static inline int ath79_register_pci(void) { return 0; }
+ #endif
diff --git a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
new file mode 100644
index 000000000..1ce980437
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
@@ -0,0 +1,85 @@
+From 0b026adc7a471edd018a060427e62d06e54be2bc Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 20 Nov 2011 15:50:32 +0100
+Subject: [PATCH 18/35] MIPS: ath79: remove ar724x_pci_add_data function
+
+The variables set by this function are not used anymore.
+Remove the function and the relevant variables as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-ubnt-xm.c | 7 -------
+ arch/mips/ath79/pci.c | 8 --------
+ arch/mips/ath79/pci.h | 6 ------
+ 3 files changed, 0 insertions(+), 21 deletions(-)
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -82,12 +82,6 @@ static struct ath79_spi_platform_data ub
+ #ifdef CONFIG_PCI
+ static struct ath9k_platform_data ubnt_xm_eeprom_data;
+
+-static struct ar724x_pci_data ubnt_xm_pci_data[] = {
+- {
+- .irq = ATH79_PCI_IRQ(0),
+- },
+-};
+-
+ static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+ {
+ switch (PCI_SLOT(dev->devfn)) {
+@@ -104,7 +98,6 @@ static void __init ubnt_xm_pci_init(void
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+ ath79_register_pci();
+ }
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -18,8 +18,6 @@
+ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+-static struct ar724x_pci_data *pci_data;
+-static int pci_data_size;
+
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ {
+@@ -45,12 +43,6 @@ static const struct ath79_pci_irq ar724x
+ }
+ };
+
+-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
+-{
+- pci_data = data;
+- pci_data_size = size;
+-}
+-
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+ int irq = -1;
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -11,18 +11,12 @@
+ #ifndef _ATH79_PCI_H
+ #define _ATH79_PCI_H
+
+-struct ar724x_pci_data {
+- int irq;
+-};
+-
+ struct ath79_pci_irq {
+ u8 slot;
+ u8 pin;
+ int irq;
+ };
+
+-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
+-
+ #ifdef CONFIG_PCI
+ void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+ void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
diff --git a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
new file mode 100644
index 000000000..36d17e9fa
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
@@ -0,0 +1,33 @@
+From 1759a5bc87d0eb8dbb0d8a9794b336813057eb88 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 25 Nov 2010 17:59:28 +0100
+Subject: [PATCH 19/35] MIPS: ath79: register PCI controller on the PB44 board
+
+The PB44 reference board has two miniPCI slots. Register
+the PCI controller to make those usable.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+v2: - no changes
+---
+ arch/mips/ath79/mach-pb44.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -19,6 +19,7 @@
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "pci.h"
+
+ #define PB44_GPIO_I2C_SCL 0
+ #define PB44_GPIO_I2C_SDA 1
+@@ -114,6 +115,7 @@ static void __init pb44_init(void)
+ ath79_register_spi(&pb44_spi_data, pb44_spi_info,
+ ARRAY_SIZE(pb44_spi_info));
+ ath79_register_usb();
++ ath79_register_pci();
+ }
+
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
new file mode 100644
index 000000000..486e6f97c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
@@ -0,0 +1,77 @@
+From e83c294ff219ff709b8179cbff64f293199a6dad Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 22 Nov 2011 21:13:58 +0100
+Subject: [PATCH 20/35] MIPS: ath79: update copyright headers of PCI related files
+
+Add copyright records according to the recent changes in
+the PCI code. Also fix up the descriptions.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+Just in case if someone is curious about why 2008 and 2009 years are
+present in this change:
+
+The recent PCI specific changes were based on an existing
+code which can be found in the OpenWrt repository, and we
+are working on that since 2008.
+
+v2: - no changes
+---
+ arch/mips/ath79/pci.c | 4 ++++
+ arch/mips/ath79/pci.h | 4 +++-
+ arch/mips/include/asm/mach-ath79/pci.h | 4 +++-
+ arch/mips/pci/pci-ar724x.c | 3 ++-
+ 4 files changed, 12 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -2,6 +2,10 @@
+ * Atheros AR71XX/AR724X specific PCI setup code
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -1,7 +1,9 @@
+ /*
+- * Atheros 724x PCI support
++ * Atheros AR71XX/AR724X PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -1,7 +1,9 @@
+ /*
+- * Atheros 724x PCI support
++ * Atheros AR71XX/AR724X PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -1,7 +1,8 @@
+ /*
+- * Atheros 724x PCI support
++ * Atheros AR724X PCI host controller driver
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
diff --git a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch
new file mode 100644
index 000000000..d22aedec6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch
@@ -0,0 +1,52 @@
+From f60aed87f838ecfa4033ff1f63f97d05359b3b51 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 17:36:08 +0100
+Subject: [PATCH 21/35] MIPS: ath79: add early_printk support for AR934X
+
+The patch allows to see kernel messages on AR934X SoCs in
+early boot stage.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/early_printk.c | 3 +++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 6 +++++-
+ 2 files changed, 8 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
+ case REV_ID_MAJOR_AR7241:
+ case REV_ID_MAJOR_AR7242:
+ case REV_ID_MAJOR_AR913X:
++ case REV_ID_MAJOR_AR9341:
++ case REV_ID_MAJOR_AR9342:
++ case REV_ID_MAJOR_AR9344:
+ _prom_putchar = prom_putchar_ar71xx;
+ break;
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1,10 +1,11 @@
+ /*
+ * Atheros AR71XX/AR724X/AR913X SoC register definitions
+ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+@@ -249,6 +250,9 @@
+ #define REV_ID_MAJOR_AR7242 0x1100
+ #define REV_ID_MAJOR_AR9330 0x0110
+ #define REV_ID_MAJOR_AR9331 0x1110
++#define REV_ID_MAJOR_AR9341 0x0120
++#define REV_ID_MAJOR_AR9342 0x1120
++#define REV_ID_MAJOR_AR9344 0x2120
+
+ #define AR71XX_REV_ID_MINOR_MASK 0x3
+ #define AR71XX_REV_ID_MINOR_AR7130 0x0
diff --git a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
new file mode 100644
index 000000000..dc545330d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
@@ -0,0 +1,54 @@
+From 655a57ed2df5e34c32645e08c3244facba70ae5f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 14:39:04 +0100
+Subject: [PATCH 22/35] MIPS: ath79: sort case statements in ath79_detect_sys_type
+
+Sort the case statements alphabetically in order to improve
+readability.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/setup.c | 24 ++++++++++++------------
+ 1 files changed, 12 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -116,18 +116,6 @@ static void __init ath79_detect_sys_type
+ rev = id & AR724X_REV_ID_REVISION_MASK;
+ break;
+
+- case REV_ID_MAJOR_AR9330:
+- ath79_soc = ATH79_SOC_AR9330;
+- chip = "9330";
+- rev = id & AR933X_REV_ID_REVISION_MASK;
+- break;
+-
+- case REV_ID_MAJOR_AR9331:
+- ath79_soc = ATH79_SOC_AR9331;
+- chip = "9331";
+- rev = id & AR933X_REV_ID_REVISION_MASK;
+- break;
+-
+ case REV_ID_MAJOR_AR913X:
+ minor = id & AR913X_REV_ID_MINOR_MASK;
+ rev = id >> AR913X_REV_ID_REVISION_SHIFT;
+@@ -145,6 +133,18 @@ static void __init ath79_detect_sys_type
+ }
+ break;
+
++ case REV_ID_MAJOR_AR9330:
++ ath79_soc = ATH79_SOC_AR9330;
++ chip = "9330";
++ rev = id & AR933X_REV_ID_REVISION_MASK;
++ break;
++
++ case REV_ID_MAJOR_AR9331:
++ ath79_soc = ATH79_SOC_AR9331;
++ chip = "9331";
++ rev = id & AR933X_REV_ID_REVISION_MASK;
++ break;
++
+ default:
+ panic("ath79: unknown SoC, id:0x%08x", id);
+ }
diff --git a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
new file mode 100644
index 000000000..f503ad195
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
@@ -0,0 +1,120 @@
+From 9c19e86a7eccf8efd159ba213290830164f33a71 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 17:36:42 +0100
+Subject: [PATCH 23/35] MIPS: ath79: add SoC detection code for AR934X
+
+Also add 'soc_is_ar934[124x]' helper functions and a Kconfig
+symbol for the AR934X SoCs.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig | 4 ++++
+ arch/mips/ath79/setup.c | 21 ++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
+ arch/mips/include/asm/mach-ath79/ath79.h | 23 +++++++++++++++++++++++
+ 4 files changed, 49 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -69,6 +69,10 @@ config SOC_AR933X
+ select USB_ARCH_HAS_EHCI
+ def_bool n
+
++config SOC_AR934X
++ select USB_ARCH_HAS_EHCI
++ def_bool n
++
+ config ATH79_DEV_GPIO_BUTTONS
+ def_bool n
+
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -1,10 +1,11 @@
+ /*
+ * Atheros AR71XX/AR724X/AR913X specific setup
+ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+@@ -145,6 +146,24 @@ static void __init ath79_detect_sys_type
+ rev = id & AR933X_REV_ID_REVISION_MASK;
+ break;
+
++ case REV_ID_MAJOR_AR9341:
++ ath79_soc = ATH79_SOC_AR9341;
++ chip = "9341";
++ rev = id & AR934X_REV_ID_REVISION_MASK;
++ break;
++
++ case REV_ID_MAJOR_AR9342:
++ ath79_soc = ATH79_SOC_AR9342;
++ chip = "9342";
++ rev = id & AR934X_REV_ID_REVISION_MASK;
++ break;
++
++ case REV_ID_MAJOR_AR9344:
++ ath79_soc = ATH79_SOC_AR9344;
++ chip = "9344";
++ rev = id & AR934X_REV_ID_REVISION_MASK;
++ break;
++
+ default:
+ panic("ath79: unknown SoC, id:0x%08x", id);
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -271,6 +271,8 @@
+
+ #define AR724X_REV_ID_REVISION_MASK 0x3
+
++#define AR934X_REV_ID_REVISION_MASK 0xf
++
+ /*
+ * SPI block
+ */
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -29,6 +29,9 @@ enum ath79_soc_type {
+ ATH79_SOC_AR9132,
+ ATH79_SOC_AR9330,
+ ATH79_SOC_AR9331,
++ ATH79_SOC_AR9341,
++ ATH79_SOC_AR9342,
++ ATH79_SOC_AR9344,
+ };
+
+ extern enum ath79_soc_type ath79_soc;
+@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
+ ath79_soc == ATH79_SOC_AR9331);
+ }
+
++static inline int soc_is_ar9341(void)
++{
++ return (ath79_soc == ATH79_SOC_AR9341);
++}
++
++static inline int soc_is_ar9342(void)
++{
++ return (ath79_soc == ATH79_SOC_AR9342);
++}
++
++static inline int soc_is_ar9344(void)
++{
++ return (ath79_soc == ATH79_SOC_AR9344);
++}
++
++static inline int soc_is_ar934x(void)
++{
++ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
++}
++
+ extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
diff --git a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
new file mode 100644
index 000000000..fd7976faf
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
@@ -0,0 +1,194 @@
+From 783addfa256e79892f889e95ec5cda34f4e91eb7 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 20:36:32 +0100
+Subject: [PATCH 24/35] MIPS: ath79: add clock initialization code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/clock.c | 81 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 53 +++++++++++++++
+ 2 files changed, 134 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -1,8 +1,11 @@
+ /*
+ * Atheros AR71XX/AR724X/AR913X common routines
+ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(vo
+ ath79_uart_clk.rate = ath79_ref_clk.rate;
+ }
+
++static void __init ar934x_clocks_init(void)
++{
++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++ u32 cpu_pll, ddr_pll;
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
++ ath79_ref_clk.rate = 40 * 1000 * 1000;
++ else
++ ath79_ref_clk.rate = 25 * 1000 * 1000;
++
++ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
++ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
++ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
++ AR934X_PLL_CPU_CONFIG_NINT_MASK;
++ frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
++ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
++ cpu_pll /= (1 << out_div);
++
++ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
++ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
++ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
++ AR934X_PLL_DDR_CONFIG_NINT_MASK;
++ frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
++ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
++ ddr_pll /= (1 << out_div);
++
++ clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
++
++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++ AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
++
++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
++ ath79_cpu_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
++ else
++ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++ AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
++
++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
++ ath79_ddr_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++ AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
++
++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
++ ath79_ahb_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
++
++ ath79_wdt_clk.rate = ath79_ref_clk.rate;
++ ath79_uart_clk.rate = ath79_ref_clk.rate;
++}
++
+ void __init ath79_clocks_init(void)
+ {
+ if (soc_is_ar71xx())
+@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
+ ar913x_clocks_init();
+ else if (soc_is_ar933x())
+ ar933x_clocks_init();
++ else if (soc_is_ar934x())
++ ar934x_clocks_init();
+ else
+ BUG();
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -151,6 +151,41 @@
+ #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
+ #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
+
++#define AR934X_PLL_CPU_CONFIG_REG 0x00
++#define AR934X_PLL_DDR_CONFIG_REG 0x04
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
++
++#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
++#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
++#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
++#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
++#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
++#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
++#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
++#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
++
++#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
++#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
++#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
++#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
++#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
++#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
++#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
++#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
++
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
++
+ /*
+ * USB_CONFIG block
+ */
+@@ -186,6 +221,8 @@
+ #define AR933X_RESET_REG_RESET_MODULE 0x1c
+ #define AR933X_RESET_REG_BOOTSTRAP 0xac
+
++#define AR934X_RESET_REG_BOOTSTRAP 0xb0
++
+ #define MISC_INT_ETHSW BIT(12)
+ #define MISC_INT_TIMER4 BIT(10)
+ #define MISC_INT_TIMER3 BIT(9)
+@@ -242,6 +279,22 @@
+
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
++#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
++#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
++#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
++#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
++#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
++#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
++#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
++#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
++#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
++#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
++#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
++#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
++#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
++#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
++#define AR934X_BOOTSTRAP_DDR1 BIT(0)
++
+ #define REV_ID_MAJOR_MASK 0xfff0
+ #define REV_ID_MAJOR_AR71XX 0x00a0
+ #define REV_ID_MAJOR_AR913X 0x00b0
diff --git a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
new file mode 100644
index 000000000..f406db90e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
@@ -0,0 +1,98 @@
+From c01b6005cfa2d762c2de33d5be2e82f91afaa66f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 20:53:47 +0100
+Subject: [PATCH 25/35] MIPS: ath79: add GPIO support code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/gpio.c | 47 +++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
+ 2 files changed, 47 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -1,9 +1,12 @@
+ /*
+ * Atheros AR71XX/AR724X/AR913X GPIO API support
+ *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(s
+ return 0;
+ }
+
++static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ void __iomem *base = ath79_gpio_base;
++ unsigned long flags;
++
++ spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
++ base + AR71XX_GPIO_REG_OE);
++
++ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++
++ return 0;
++}
++
++static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
++ int value)
++{
++ void __iomem *base = ath79_gpio_base;
++ unsigned long flags;
++
++ spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++ if (value)
++ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
++ else
++ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
++
++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
++ base + AR71XX_GPIO_REG_OE);
++
++ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++
++ return 0;
++}
++
+ static struct gpio_chip ath79_gpio_chip = {
+ .label = "ath79",
+ .get = ath79_gpio_get_value,
+@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
+ ath79_gpio_count = AR913X_GPIO_COUNT;
+ else if (soc_is_ar933x())
+ ath79_gpio_count = AR933X_GPIO_COUNT;
++ else if (soc_is_ar934x())
++ ath79_gpio_count = AR934X_GPIO_COUNT;
+ else
+ BUG();
+
+ ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ ath79_gpio_chip.ngpio = ath79_gpio_count;
++ if (soc_is_ar934x()) {
++ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
++ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
++ }
+
+ err = gpiochip_add(&ath79_gpio_chip);
+ if (err)
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -367,5 +367,6 @@
+ #define AR724X_GPIO_COUNT 18
+ #define AR913X_GPIO_COUNT 22
+ #define AR933X_GPIO_COUNT 30
++#define AR934X_GPIO_COUNT 23
+
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
new file mode 100644
index 000000000..144acacf4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
@@ -0,0 +1,154 @@
+From e69d89040d4884ea4069352338f555694e65fe70 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 21:30:03 +0100
+Subject: [PATCH 26/35] MIPS: ath79: rework IP2/IP3 interrupt handling
+
+The current implementation assumes that flushing the
+DDR writeback buffer is required for IP2/IP3 interrupts,
+however this is not true for all SoCs.
+
+Use SoC specific IP2/IP3 handlers instead of flushing
+the buffers in the dispatcher code.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/irq.c | 92 ++++++++++++++++++++++++++++++++++++++-----------
+ 1 files changed, 72 insertions(+), 20 deletions(-)
+
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -1,7 +1,7 @@
+ /*
+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
+ *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
+@@ -23,8 +23,8 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "common.h"
+
+-static unsigned int ath79_ip2_flush_reg;
+-static unsigned int ath79_ip3_flush_reg;
++static void (*ath79_ip2_handler)(void);
++static void (*ath79_ip3_handler)(void);
+
+ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+@@ -152,10 +152,8 @@ asmlinkage void plat_irq_dispatch(void)
+ if (pending & STATUSF_IP7)
+ do_IRQ(ATH79_CPU_IRQ_TIMER);
+
+- else if (pending & STATUSF_IP2) {
+- ath79_ddr_wb_flush(ath79_ip2_flush_reg);
+- do_IRQ(ATH79_CPU_IRQ_IP2);
+- }
++ else if (pending & STATUSF_IP2)
++ ath79_ip2_handler();
+
+ else if (pending & STATUSF_IP4)
+ do_IRQ(ATH79_CPU_IRQ_GE0);
+@@ -163,10 +161,8 @@ asmlinkage void plat_irq_dispatch(void)
+ else if (pending & STATUSF_IP5)
+ do_IRQ(ATH79_CPU_IRQ_GE1);
+
+- else if (pending & STATUSF_IP3) {
+- ath79_ddr_wb_flush(ath79_ip3_flush_reg);
+- do_IRQ(ATH79_CPU_IRQ_USB);
+- }
++ else if (pending & STATUSF_IP3)
++ ath79_ip3_handler();
+
+ else if (pending & STATUSF_IP6)
+ do_IRQ(ATH79_CPU_IRQ_MISC);
+@@ -175,22 +171,78 @@ asmlinkage void plat_irq_dispatch(void)
+ spurious_interrupt();
+ }
+
++/*
++ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
++ * these devices typically allocate coherent DMA memory, however the
++ * DMA controller may still have some unsynchronized data in the FIFO.
++ * Issue a flush in the handlers to ensure that the driver sees
++ * the update.
++ */
++static void ar71xx_ip2_handler(void)
++{
++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar724x_ip2_handler(void)
++{
++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar913x_ip2_handler(void)
++{
++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar933x_ip2_handler(void)
++{
++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ar71xx_ip3_handler(void)
++{
++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar724x_ip3_handler(void)
++{
++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar913x_ip3_handler(void)
++{
++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
++static void ar933x_ip3_handler(void)
++{
++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
+ void __init arch_init_irq(void)
+ {
+ if (soc_is_ar71xx()) {
+- ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
+- ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
++ ath79_ip2_handler = ar71xx_ip2_handler;
++ ath79_ip3_handler = ar71xx_ip3_handler;
+ } else if (soc_is_ar724x()) {
+- ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
+- ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
++ ath79_ip2_handler = ar724x_ip2_handler;
++ ath79_ip3_handler = ar724x_ip3_handler;
+ } else if (soc_is_ar913x()) {
+- ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
+- ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
++ ath79_ip2_handler = ar913x_ip2_handler;
++ ath79_ip3_handler = ar913x_ip3_handler;
+ } else if (soc_is_ar933x()) {
+- ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
+- ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
+- } else
++ ath79_ip2_handler = ar933x_ip2_handler;
++ ath79_ip3_handler = ar933x_ip3_handler;
++ } else {
+ BUG();
++ }
+
+ cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
+ mips_cpu_irq_init();
diff --git a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
new file mode 100644
index 000000000..083ca3318
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
@@ -0,0 +1,190 @@
+From 9db6021011556948d2d28d6957cee451bc2985aa Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 21:59:50 +0100
+Subject: [PATCH 27/35] MIPS: ath79: add IRQ handling code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/irq.c | 55 +++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 25 +++++++++++
+ arch/mips/include/asm/mach-ath79/irq.h | 6 ++-
+ 3 files changed, 83 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -1,10 +1,11 @@
+ /*
+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
+ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(v
+
+ if (soc_is_ar71xx() || soc_is_ar913x())
+ ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+- else if (soc_is_ar724x() || soc_is_ar933x())
++ else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
+ ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ else
+ BUG();
+@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(v
+ irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
+ }
+
++static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++ u32 status;
++
++ disable_irq_nosync(irq);
++
++ status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
++
++ if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
++ generic_handle_irq(ATH79_IP2_IRQ(0));
++ } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
++ generic_handle_irq(ATH79_IP2_IRQ(1));
++ } else {
++ spurious_interrupt();
++ }
++
++ enable_irq(irq);
++}
++
++static void ar934x_ip2_irq_init(void)
++{
++ int i;
++
++ for (i = ATH79_IP2_IRQ_BASE;
++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++ irq_set_chip_and_handler(i, &dummy_irq_chip,
++ handle_level_irq);
++
++ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
++}
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ unsigned long pending;
+@@ -202,6 +236,11 @@ static void ar933x_ip2_handler(void)
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+ }
+
++static void ar934x_ip2_handler(void)
++{
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
+ static void ar71xx_ip3_handler(void)
+ {
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
+@@ -226,6 +265,12 @@ static void ar933x_ip3_handler(void)
+ do_IRQ(ATH79_CPU_IRQ_USB);
+ }
+
++static void ar934x_ip3_handler(void)
++{
++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
+ void __init arch_init_irq(void)
+ {
+ if (soc_is_ar71xx()) {
+@@ -240,6 +285,9 @@ void __init arch_init_irq(void)
+ } else if (soc_is_ar933x()) {
+ ath79_ip2_handler = ar933x_ip2_handler;
+ ath79_ip3_handler = ar933x_ip3_handler;
++ } else if (soc_is_ar934x()) {
++ ath79_ip2_handler = ar934x_ip2_handler;
++ ath79_ip3_handler = ar934x_ip3_handler;
+ } else {
+ BUG();
+ }
+@@ -247,4 +295,7 @@ void __init arch_init_irq(void)
+ cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
+ mips_cpu_irq_init();
+ ath79_misc_irq_init();
++
++ if (soc_is_ar934x())
++ ar934x_ip2_irq_init();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -92,6 +92,12 @@
+ #define AR933X_DDR_REG_FLUSH_USB 0x84
+ #define AR933X_DDR_REG_FLUSH_WMAC 0x88
+
++#define AR934X_DDR_REG_FLUSH_GE0 0x9c
++#define AR934X_DDR_REG_FLUSH_GE1 0xa0
++#define AR934X_DDR_REG_FLUSH_USB 0xa4
++#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
++#define AR934X_DDR_REG_FLUSH_WMAC 0xac
++
+ /*
+ * PLL block
+ */
+@@ -222,6 +228,7 @@
+ #define AR933X_RESET_REG_BOOTSTRAP 0xac
+
+ #define AR934X_RESET_REG_BOOTSTRAP 0xb0
++#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+
+ #define MISC_INT_ETHSW BIT(12)
+ #define MISC_INT_TIMER4 BIT(10)
+@@ -295,6 +302,24 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1 BIT(0)
+
++#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
++#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
++#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
++#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
++#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
++#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
++ (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
++ AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
++
++#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
++ (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
++ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
++ AR934X_PCIE_WMAC_INT_PCIE_RC3)
++
+ #define REV_ID_MAJOR_MASK 0xfff0
+ #define REV_ID_MAJOR_AR71XX 0x00a0
+ #define REV_ID_MAJOR_AR913X 0x00b0
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -10,7 +10,7 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+
+ #define MIPS_CPU_IRQ_BASE 0
+-#define NR_IRQS 46
++#define NR_IRQS 48
+
+ #define ATH79_MISC_IRQ_BASE 8
+ #define ATH79_MISC_IRQ_COUNT 32
+@@ -19,6 +19,10 @@
+ #define ATH79_PCI_IRQ_COUNT 6
+ #define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
+
++#define ATH79_IP2_IRQ_BASE (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
++#define ATH79_IP2_IRQ_COUNT 2
++#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
++
+ #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
+ #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
+ #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
diff --git a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
new file mode 100644
index 000000000..dc9df92fc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
@@ -0,0 +1,56 @@
+From da0f20f8a99de9193fc484a25d1f9edc913c98fd Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 10 Dec 2011 20:09:39 +0100
+Subject: [PATCH 28/35] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set}
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/common.c | 9 ++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
+ 2 files changed, 9 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -1,9 +1,12 @@
+ /*
+ * Atheros AR71XX/AR724X/AR913X common routines
+ *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar934x())
++ reg = AR934X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+
+@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar934x())
++ reg = AR934X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -227,6 +227,7 @@
+ #define AR933X_RESET_REG_RESET_MODULE 0x1c
+ #define AR933X_RESET_REG_BOOTSTRAP 0xac
+
++#define AR934X_RESET_REG_RESET_MODULE 0x1c
+ #define AR934X_RESET_REG_BOOTSTRAP 0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+
diff --git a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
new file mode 100644
index 000000000..db5ae6164
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
@@ -0,0 +1,23 @@
+From 6b6803a249a27aa708bc5f24aa15270e30f3de61 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 10 Dec 2011 19:55:05 +0100
+Subject: [PATCH 29/35] MIPS: ath79: register UART device for AR934X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/dev-common.c | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
+
+ if (soc_is_ar71xx() ||
+ soc_is_ar724x() ||
+- soc_is_ar913x()) {
++ soc_is_ar913x() ||
++ soc_is_ar934x()) {
+ ath79_uart_data[0].uartclk = clk_get_rate(clk);
+ platform_device_register(&ath79_uart_device);
+ } else if (soc_is_ar933x()) {
diff --git a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
new file mode 100644
index 000000000..ca7c9289c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
@@ -0,0 +1,112 @@
+From 58b69cf52387a7351ec13b52d3d6a495fe611c29 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:07:23 +0100
+Subject: [PATCH 30/35] MIPS: ath79: add WMAC registration code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig | 2 +-
+ arch/mips/ath79/dev-wmac.c | 30 ++++++++++++++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
+ 3 files changed, 32 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -86,7 +86,7 @@ config ATH79_DEV_USB
+ def_bool n
+
+ config ATH79_DEV_WMAC
+- depends on (SOC_AR913X || SOC_AR933X)
++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+ def_bool n
+
+ endif
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -1,9 +1,12 @@
+ /*
+ * Atheros AR913X/AR933X SoC built-in WMAC device support
+ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
++ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resour
+ /* .start and .end fields are filled dynamically */
+ .flags = IORESOURCE_MEM,
+ }, {
+- .start = ATH79_CPU_IRQ_IP2,
+- .end = ATH79_CPU_IRQ_IP2,
++ /* .start and .end fields are filled dynamically */
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(voi
+
+ ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+ }
+
+
+@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(voi
+
+ ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(voi
+ ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
+
++static void ar934x_wmac_setup(void)
++{
++ u32 t;
++
++ ath79_wmac_device.name = "ar934x_wmac";
++
++ ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
++ ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++
++ t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++ if (t & AR934X_BOOTSTRAP_REF_CLK_40)
++ ath79_wmac_data.is_clk_25mhz = false;
++ else
++ ath79_wmac_data.is_clk_25mhz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data)
+ {
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+ else if (soc_is_ar933x())
+ ar933x_wmac_setup();
++ else if (soc_is_ar934x())
++ ar934x_wmac_setup();
+ else
+ BUG();
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -61,6 +61,9 @@
+ #define AR933X_EHCI_BASE 0x1b000000
+ #define AR933X_EHCI_SIZE 0x1000
+
++#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
++#define AR934X_WMAC_SIZE 0x20000
++
+ /*
+ * DDR_CTRL block
+ */
diff --git a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
new file mode 100644
index 000000000..7ac304fe8
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
@@ -0,0 +1,107 @@
+From 2d832612094b5592641364773c5ab2a3658f7120 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 18:34:13 +0100
+Subject: [PATCH 31/35] MIPS: ath79: add USB platform setup code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/dev-usb.c | 28 +++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 35 ++++++++++++++++++++++++
+ 2 files changed, 63 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -180,6 +180,32 @@ static void __init ar933x_usb_setup(void
+ platform_device_register(&ath79_ehci_device);
+ }
+
++static void __init ar934x_usb_setup(void)
++{
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++ return;
++
++ ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
++ udelay(1000);
++
++ ath79_device_reset_set(AR934X_RESET_USB_PHY);
++ udelay(1000);
++
++ ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
++ udelay(1000);
++
++ ath79_device_reset_set(AR934X_RESET_USB_HOST);
++ udelay(1000);
++
++ ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
++ ath79_ehci_resources[0].end = AR934X_EHCI_BASE + AR934X_EHCI_SIZE - 1;
++ ath79_ehci_device.name = "ar934x-ehci";
++ platform_device_register(&ath79_ehci_device);
++}
++
+ void __init ath79_register_usb(void)
+ {
+ if (soc_is_ar71xx())
+@@ -192,6 +218,8 @@ void __init ath79_register_usb(void)
+ ar913x_usb_setup();
+ else if (soc_is_ar933x())
+ ar933x_usb_setup();
++ else if (soc_is_ar934x())
++ ar934x_usb_setup();
+ else
+ BUG();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -63,6 +63,8 @@
+
+ #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE 0x20000
++#define AR934X_EHCI_BASE 0x1b000000
++#define AR934X_EHCI_SIZE 0x1000
+
+ /*
+ * DDR_CTRL block
+@@ -288,6 +290,39 @@
+ #define AR933X_RESET_USB_PHY BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
++#define AR934X_RESET_HOST BIT(31)
++#define AR934X_RESET_SLIC BIT(30)
++#define AR934X_RESET_HDMA BIT(29)
++#define AR934X_RESET_EXTERNAL BIT(28)
++#define AR934X_RESET_RTC BIT(27)
++#define AR934X_RESET_PCIE_EP_INT BIT(26)
++#define AR934X_RESET_CHKSUM_ACC BIT(25)
++#define AR934X_RESET_FULL_CHIP BIT(24)
++#define AR934X_RESET_GE1_MDIO BIT(23)
++#define AR934X_RESET_GE0_MDIO BIT(22)
++#define AR934X_RESET_CPU_NMI BIT(21)
++#define AR934X_RESET_CPU_COLD BIT(20)
++#define AR934X_RESET_HOST_RESET_INT BIT(19)
++#define AR934X_RESET_PCIE_EP BIT(18)
++#define AR934X_RESET_UART1 BIT(17)
++#define AR934X_RESET_DDR BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF BIT(14)
++#define AR934X_RESET_GE1_MAC BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
++#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
++#define AR934X_RESET_HOST_DMA_INT BIT(10)
++#define AR934X_RESET_GE0_MAC BIT(9)
++#define AR934X_RESET_ETH_SIWTCH BIT(8)
++#define AR934X_RESET_PCIE_PHY BIT(7)
++#define AR934X_RESET_PCIE BIT(6)
++#define AR934X_RESET_USB_HOST BIT(5)
++#define AR934X_RESET_USB_PHY BIT(4)
++#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
++#define AR934X_RESET_LUT BIT(2)
++#define AR934X_RESET_MBOX BIT(1)
++#define AR934X_RESET_I2S BIT(0)
++
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
+ #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
diff --git a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
new file mode 100644
index 000000000..62e95df95
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
@@ -0,0 +1,62 @@
+From f299f36542f81f05cff7cdebb50abde202faf6df Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Dec 2011 10:04:18 +0100
+Subject: [PATCH 32/35] MIPS: ath79: add PCI_AR724X Kconfig symbol
+
+The AR724X specific PCI code can be used for the
+AR934X SoCs, however it can be selected only if
+SOC_AR724X is set.
+
+Introduce a new Kconfig symbol in order to be able
+to use the code for AR934X as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig | 4 ++++
+ arch/mips/include/asm/mach-ath79/pci.h | 2 +-
+ arch/mips/pci/Makefile | 2 +-
+ 3 files changed, 6 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -59,6 +59,7 @@ config SOC_AR724X
+ select USB_ARCH_HAS_EHCI
+ select USB_ARCH_HAS_OHCI
+ select HW_HAS_PCI
++ select PCI_AR724X if PCI
+ def_bool n
+
+ config SOC_AR913X
+@@ -73,6 +74,9 @@ config SOC_AR934X
+ select USB_ARCH_HAS_EHCI
+ def_bool n
+
++config PCI_AR724X
++ def_bool n
++
+ config ATH79_DEV_GPIO_BUTTONS
+ def_bool n
+
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void);
+ static inline int ar71xx_pcibios_init(void) { return 0 };
+ #endif
+
+-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
++#if defined(CONFIG_PCI_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+ static inline int ar724x_pcibios_init(int irq) { return 0 };
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
+ ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+ obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+-obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
++obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
new file mode 100644
index 000000000..7f168b33e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
@@ -0,0 +1,58 @@
+From e30d942814a606c5258c7adafc6bbb49836573e9 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Dec 2011 10:13:08 +0100
+Subject: [PATCH 33/35] MIPS: ath79: add PCI registration code for AR934X
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig | 2 ++
+ arch/mips/ath79/pci.c | 13 ++++++++++++-
+ 2 files changed, 14 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -72,6 +72,8 @@ config SOC_AR933X
+
+ config SOC_AR934X
+ select USB_ARCH_HAS_EHCI
++ select HW_HAS_PCI
++ select PCI_AR724X if PCI
+ def_bool n
+
+ config PCI_AR724X
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -14,6 +14,7 @@
+
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+ #include <asm/mach-ath79/pci.h>
+@@ -57,7 +58,9 @@ int __init pcibios_map_irq(const struct
+ if (soc_is_ar71xx()) {
+ ath79_pci_irq_map = ar71xx_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
+- } else if (soc_is_ar724x()) {
++ } else if (soc_is_ar724x() ||
++ soc_is_ar9342() ||
++ soc_is_ar9344()) {
+ ath79_pci_irq_map = ar724x_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+ } else {
+@@ -115,5 +118,13 @@ int __init ath79_register_pci(void)
+ if (soc_is_ar724x())
+ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+
++ if (soc_is_ar9342() || soc_is_ar9344()) {
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
++ return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
++ }
++
+ return -ENODEV;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
new file mode 100644
index 000000000..3f6c3e2ad
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
@@ -0,0 +1,213 @@
+From a01e8727327cf0fb6382ca8700a3a3f73d93202a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 9 Dec 2011 22:23:02 +0100
+Subject: [PATCH 34/35] MIPS: ath79: add initial support for the Atheros DB120 board
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+---
+ arch/mips/ath79/Kconfig | 12 +++
+ arch/mips/ath79/Makefile | 1 +
+ arch/mips/ath79/mach-db120.c | 155 ++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ath79/machtypes.h | 1 +
+ 4 files changed, 169 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/ath79/mach-db120.c
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP81 reference board.
+
++config ATH79_MACH_DB120
++ bool "Atheros DB120 reference board"
++ select SOC_AR934X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros DB120 reference board.
++
+ config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -28,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+--- /dev/null
++++ b/arch/mips/ath79/mach-db120.c
+@@ -0,0 +1,155 @@
++/*
++ * Atheros DB120 reference board support
++ *
++ * Copyright (c) 2011 Qualcomm Atheros
++ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted (subject to the limitations in the
++ * disclaimer below) provided that the following conditions are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ *
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the
++ * distribution.
++ *
++ * * Neither the name of Qualcomm Atheros nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
++ * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
++ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
++ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
++ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/pci.h>
++#include <linux/ath9k_platform.h>
++
++#include "machtypes.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "pci.h"
++
++#define DB120_GPIO_LED_WLAN_5G 12
++#define DB120_GPIO_LED_WLAN_2G 13
++#define DB120_GPIO_LED_STATUS 14
++#define DB120_GPIO_LED_WPS 15
++
++#define DB120_GPIO_BTN_WPS 16
++
++#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
++#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
++
++#define DB120_WMAC_CALDATA_OFFSET 0x1000
++#define DB120_PCIE_CALDATA_OFFSET 0x5000
++
++static struct gpio_led db120_leds_gpio[] __initdata = {
++ {
++ .name = "db120:green:status",
++ .gpio = DB120_GPIO_LED_STATUS,
++ .active_low = 1,
++ },
++ {
++ .name = "db120:green:wps",
++ .gpio = DB120_GPIO_LED_WPS,
++ .active_low = 1,
++ },
++ {
++ .name = "db120:green:wlan-5g",
++ .gpio = DB120_GPIO_LED_WLAN_5G,
++ .active_low = 1,
++ },
++ {
++ .name = "db120:green:wlan-2g",
++ .gpio = DB120_GPIO_LED_WLAN_2G,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_button db120_gpio_keys[] __initdata = {
++ {
++ .desc = "WPS button",
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = DB120_GPIO_BTN_WPS,
++ .active_low = 1,
++ },
++};
++
++static struct spi_board_info db120_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "s25sl064a",
++ }
++};
++
++static struct ath79_spi_platform_data db120_spi_data = {
++ .bus_num = 0,
++ .num_chipselect = 1,
++};
++
++#ifdef CONFIG_PCI
++static struct ath9k_platform_data db120_ath9k_data;
++
++static int db120_pci_plat_dev_init(struct pci_dev *dev)
++{
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0:
++ dev->dev.platform_data = &db120_ath9k_data;
++ break;
++ }
++
++ return 0;
++}
++
++static void __init db120_pci_init(u8 *eeprom)
++{
++ memcpy(db120_ath9k_data.eeprom_data, eeprom,
++ sizeof(db120_ath9k_data.eeprom_data));
++
++ ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
++ ath79_register_pci();
++}
++#else
++static inline void db120_pci_init(void) {}
++#endif /* CONFIG_PCI */
++
++static void __init db120_setup(void)
++{
++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
++ db120_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(db120_gpio_keys),
++ db120_gpio_keys);
++ ath79_register_spi(&db120_spi_data, db120_spi_info,
++ ARRAY_SIZE(db120_spi_info));
++ ath79_register_usb();
++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
++ db120_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -18,6 +18,7 @@ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
++ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ };
diff --git a/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch b/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch
new file mode 100644
index 000000000..d84bf37b6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch
@@ -0,0 +1,41 @@
+From cbf8930fe259777fb746f0387bf821729061c122 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 11 Dec 2011 22:09:20 +0100
+Subject: [PATCH 35/35] USB: ehci-ath79: add device_id entry for the AR934X SoCs
+
+Also make the USB_EHCI_ATH79 selectable for the AR934X SoCs.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+Cc: Alan Stern <stern@rowland.harvard.edu>
+Cc: Greg Kroah-Hartman <gregkh@suse.de>
+Cc: linux-usb@vger.kernel.org
+---
+ drivers/usb/host/Kconfig | 2 +-
+ drivers/usb/host/ehci-ath79.c | 4 ++++
+ 2 files changed, 5 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -219,7 +219,7 @@ config USB_CNS3XXX_EHCI
+
+ config USB_EHCI_ATH79
+ bool "EHCI support for AR7XXX/AR9XXX SoCs"
+- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
++ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X || SOC_AR934X)
+ select USB_EHCI_ROOT_HUB_TT
+ default y
+ ---help---
+--- a/drivers/usb/host/ehci-ath79.c
++++ b/drivers/usb/host/ehci-ath79.c
+@@ -37,6 +37,10 @@ static const struct platform_device_id e
+ .driver_data = EHCI_ATH79_IP_V2,
+ },
+ {
++ .name = "ar934x-ehci",
++ .driver_data = EHCI_ATH79_IP_V2,
++ },
++ {
+ /* terminating entry */
+ },
+ };
diff --git a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch
new file mode 100644
index 000000000..c2681f9a5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch
@@ -0,0 +1,42 @@
+From 48b7e765e6e097d20d809fadd17a4355d26ad6d5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:06:35 +0100
+Subject: [PATCH 1/7] spi/ath79: add delay between SCK changes
+
+The driver uses the "as fast as it can" approach
+to drive the SCK signal. However this does not
+work with certain low speed SPI chips (e.g. the
+PCF2123 RTC chip). Add per-bit slowdowns in order
+to be able to use the driver with such chips as
+well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -52,6 +52,12 @@ static inline struct ath79_spi *ath79_sp
+ return spi_master_get_devdata(spi->master);
+ }
+
++static inline void ath79_spi_delay(unsigned nsecs)
++{
++ if (nsecs)
++ ndelay(nsecs);
++}
++
+ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+@@ -184,7 +190,9 @@ static u32 ath79_spi_txrx_mode0(struct s
+
+ /* setup MSB (to slave) on trailing edge */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
++ ath79_spi_delay(nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
++ ath79_spi_delay(nsecs);
+
+ word <<= 1;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
new file mode 100644
index 000000000..0b36ab657
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
@@ -0,0 +1,20 @@
+From 0ad8cbbb978bc01de08eadd3357ea188302b83ce Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:33:41 +0100
+Subject: [PATCH 2/7] spi/ath79: add missing HIGH->LOW SCK transition
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -193,6 +193,7 @@ static u32 ath79_spi_txrx_mode0(struct s
+ ath79_spi_delay(nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(nsecs);
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+
+ word <<= 1;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch
new file mode 100644
index 000000000..a2391be64
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch
@@ -0,0 +1,30 @@
+From 7385ff2cb72d6a0107890760466b9564aa5204c1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:03:28 +0100
+Subject: [PATCH 3/7] spi/ath79: remove superfluous chip select code
+
+The spi_bitbang driver calls the chipselect function
+of the driver from spi_bitbang_setup in order to
+deselect the given SPI chip, so we don't have to
+initialize the CS line here.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -121,12 +121,6 @@ static int ath79_spi_setup_cs(struct spi
+ gpio_free(cdata->gpio);
+ return status;
+ }
+- } else {
+- if (spi->mode & SPI_CS_HIGH)
+- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+- else
+- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ }
+
+ return 0;
diff --git a/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch
new file mode 100644
index 000000000..1f607fd5d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch
@@ -0,0 +1,56 @@
+From c5bfb0c760a5d8de7ffc3a6acfb8c782be6af1a5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:04:21 +0100
+Subject: [PATCH 4/7] spi/ath79: use gpio_request_one
+
+Use gpio_request_one() instead of multiple gpiolib calls.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
+ 1 files changed, 13 insertions(+), 13 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -93,6 +93,7 @@ static int ath79_spi_setup_cs(struct spi
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ struct ath79_spi_controller_data *cdata;
++ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+@@ -108,22 +109,21 @@ static int ath79_spi_setup_cs(struct spi
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+
++ status = 0;
+ if (spi->chip_select) {
+- int status = 0;
++ unsigned long flags;
+
+- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
+- if (status)
+- return status;
+-
+- status = gpio_direction_output(cdata->gpio,
+- spi->mode & SPI_CS_HIGH);
+- if (status) {
+- gpio_free(cdata->gpio);
+- return status;
+- }
++ flags = GPIOF_DIR_OUT;
++ if (spi->mode & SPI_CS_HIGH)
++ flags |= GPIOF_INIT_HIGH;
++ else
++ flags |= GPIOF_INIT_LOW;
++
++ status = gpio_request_one(cdata->gpio, flags,
++ dev_name(&spi->dev));
+ }
+
+- return 0;
++ return status;
+ }
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
diff --git a/target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch b/target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch
new file mode 100644
index 000000000..ce98ad8e4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch
@@ -0,0 +1,98 @@
+From 4518ae06e5fc953abfd9c2b66c6155fc2b2696ce Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:00:46 +0100
+Subject: [PATCH 5/7] spi/ath79: introduce ath79_spi_{en,dis}able helpers
+
+---
+ drivers/spi/spi-ath79.c | 41 +++++++++++++++++++++++++----------------
+ 1 files changed, 25 insertions(+), 16 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -89,16 +89,8 @@ static void ath79_spi_chipselect(struct
+
+ }
+
+-static int ath79_spi_setup_cs(struct spi_device *spi)
++static void ath79_spi_enable(struct ath79_spi *sp)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+- struct ath79_spi_controller_data *cdata;
+- int status;
+-
+- cdata = spi->controller_data;
+- if (spi->chip_select && !cdata)
+- return -EINVAL;
+-
+ /* enable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+@@ -108,6 +100,24 @@ static int ath79_spi_setup_cs(struct spi
+
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
++}
++
++static void ath79_spi_disable(struct ath79_spi *sp)
++{
++ /* restore CTRL register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++}
++
++static int ath79_spi_setup_cs(struct spi_device *spi)
++{
++ struct ath79_spi_controller_data *cdata;
++ int status;
++
++ cdata = spi->controller_data;
++ if (spi->chip_select && !cdata)
++ return -EINVAL;
+
+ status = 0;
+ if (spi->chip_select) {
+@@ -128,17 +138,10 @@ static int ath79_spi_setup_cs(struct spi
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+-
+ if (spi->chip_select) {
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
+ gpio_free(cdata->gpio);
+ }
+-
+- /* restore CTRL register */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+- /* disable GPIO mode */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+ }
+
+ static int ath79_spi_setup(struct spi_device *spi)
+@@ -242,13 +245,15 @@ static __devinit int ath79_spi_probe(str
+ goto err_put_master;
+ }
+
++ ath79_spi_enable(sp);
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+- goto err_unmap;
++ goto err_disable;
+
+ return 0;
+
+-err_unmap:
++err_disable:
++ ath79_spi_disable(sp);
+ iounmap(sp->base);
+ err_put_master:
+ platform_set_drvdata(pdev, NULL);
+@@ -262,6 +267,7 @@ static __devexit int ath79_spi_remove(st
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
++ ath79_spi_disable(sp);
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
diff --git a/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch
new file mode 100644
index 000000000..5ba3037b5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch
@@ -0,0 +1,45 @@
+From 1025bfbe327b3f9f7227e781c71751d5251803cb Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:19:32 +0100
+Subject: [PATCH 6/7] spi/ath79: add shutdown handler
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 12 +++++++++++-
+ 1 files changed, 11 insertions(+), 1 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -262,7 +262,7 @@ err_put_master:
+ return ret;
+ }
+
+-static __devexit int ath79_spi_remove(struct platform_device *pdev)
++static void __ath79_spi_remove(struct platform_device *pdev)
+ {
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+@@ -271,13 +271,23 @@ static __devexit int ath79_spi_remove(st
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
++}
+
++static __devexit int ath79_spi_remove(struct platform_device *pdev)
++{
++ __ath79_spi_remove(pdev);
+ return 0;
+ }
+
++static void ath79_spi_shutdown(struct platform_device *pdev)
++{
++ __ath79_spi_remove(pdev);
++}
++
+ static struct platform_driver ath79_spi_driver = {
+ .probe = ath79_spi_probe,
+ .remove = __devexit_p(ath79_spi_remove),
++ .shutdown = ath79_spi_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
diff --git a/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch
new file mode 100644
index 000000000..af96f5573
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch
@@ -0,0 +1,164 @@
+From b875f877d06acb852342636db4c3d1e6c9fe01ba Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:25:11 +0100
+Subject: [PATCH 7/7] spi/ath79: make chipselect logic more flexible
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
+ drivers/spi/spi-ath79.c | 65 +++++++++++--------
+ 2 files changed, 45 insertions(+), 28 deletions(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
+ unsigned num_chipselect;
+ };
+
++enum ath79_spi_cs_type {
++ ATH79_SPI_CS_TYPE_INTERNAL,
++ ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+- unsigned gpio;
++ enum ath79_spi_cs_type cs_type;
++ unsigned cs_line;
+ };
+
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -30,6 +30,8 @@
+
+ #define DRV_NAME "ath79-spi"
+
++#define ATH79_SPI_CS_LINE_MAX 2
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+@@ -62,6 +64,7 @@ static void ath79_spi_chipselect(struct
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++ struct ath79_spi_controller_data *cdata = spi->controller_data;
+
+ if (is_active) {
+ /* set initial clock polarity */
+@@ -73,20 +76,21 @@ static void ath79_spi_chipselect(struct
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ }
+
+- if (spi->chip_select) {
+- struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+- /* SPI is normally active-low */
+- gpio_set_value(cdata->gpio, cs_high);
+- } else {
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
+ if (cs_high)
+- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+ else
+- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+- }
++ break;
+
++ case ATH79_SPI_CS_TYPE_GPIO:
++ /* SPI is normally active-low */
++ gpio_set_value(cdata->cs_line, cs_high);
++ break;
++ }
+ }
+
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -113,24 +117,30 @@ static void ath79_spi_disable(struct ath
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+ struct ath79_spi_controller_data *cdata;
++ unsigned long flags;
+ int status;
+
+ cdata = spi->controller_data;
+- if (spi->chip_select && !cdata)
++ if (!cdata)
+ return -EINVAL;
+
+ status = 0;
+- if (spi->chip_select) {
+- unsigned long flags;
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
++ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++ status = -EINVAL;
++ break;
+
++ case ATH79_SPI_CS_TYPE_GPIO:
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+ flags |= GPIOF_INIT_HIGH;
+ else
+ flags |= GPIOF_INIT_LOW;
+
+- status = gpio_request_one(cdata->gpio, flags,
++ status = gpio_request_one(cdata->cs_line, flags,
+ dev_name(&spi->dev));
++ break;
+ }
+
+ return status;
+@@ -138,9 +148,15 @@ static int ath79_spi_setup_cs(struct spi
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+- if (spi->chip_select) {
+- struct ath79_spi_controller_data *cdata = spi->controller_data;
+- gpio_free(cdata->gpio);
++ struct ath79_spi_controller_data *cdata = spi->controller_data;
++
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
++ /* nothing to do */
++ break;
++ case ATH79_SPI_CS_TYPE_GPIO:
++ gpio_free(cdata->cs_line);
++ break;
+ }
+ }
+
+@@ -206,6 +222,10 @@ static __devinit int ath79_spi_probe(str
+ struct resource *r;
+ int ret;
+
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -EINVAL;
++
+ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -215,17 +235,10 @@ static __devinit int ath79_spi_probe(str
+ sp = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, sp);
+
+- pdata = pdev->dev.platform_data;
+-
+ master->setup = ath79_spi_setup;
+ master->cleanup = ath79_spi_cleanup;
+- if (pdata) {
+- master->bus_num = pdata->bus_num;
+- master->num_chipselect = pdata->num_chipselect;
+- } else {
+- master->bus_num = -1;
+- master->num_chipselect = 1;
+- }
++ master->bus_num = pdata->bus_num;
++ master->num_chipselect = pdata->num_chipselect;
+
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch b/target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch
new file mode 100644
index 000000000..ed7b360d9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/208-spi-ath79-make-chip-select-more-flexible.patch
@@ -0,0 +1,105 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
+ }
+ };
+
++static struct ath79_spi_controller_data ap121_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ap121_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l1606e",
++ .controller_data = &ap121_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
+ }
+ };
+
++static struct ath79_spi_controller_data ap81_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ap81_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .controller_data = &ap81_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -95,12 +95,18 @@ static struct gpio_keys_button db120_gpi
+ },
+ };
+
++static struct ath79_spi_controller_data db120_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info db120_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "s25sl064a",
++ .controller_data = &db120_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
+ }
+ };
+
++static struct ath79_spi_controller_data pb44_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .controller_data = &pb44_spi0_data,
+ },
+ };
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
++static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ubnt_xm_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
++ .controller_data = &ubnt_xm_spi0_data,
+ }
+ };
+
diff --git a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch b/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch
new file mode 100644
index 000000000..ca0d3cc70
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch
@@ -0,0 +1,27 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void)
+
+ if (soc_is_ar71xx())
+ ath79_gpio_count = AR71XX_GPIO_COUNT;
+- else if (soc_is_ar724x())
+- ath79_gpio_count = AR724X_GPIO_COUNT;
++ else if (soc_is_ar7240())
++ ath79_gpio_count = AR7240_GPIO_COUNT;
++ else if (soc_is_ar7241() || soc_is_ar7242())
++ ath79_gpio_count = AR7241_GPIO_COUNT;
+ else if (soc_is_ar913x())
+ ath79_gpio_count = AR913X_GPIO_COUNT;
+ else if (soc_is_ar933x())
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -428,7 +428,8 @@
+ #define AR71XX_GPIO_REG_FUNC 0x28
+
+ #define AR71XX_GPIO_COUNT 16
+-#define AR724X_GPIO_COUNT 18
++#define AR7240_GPIO_COUNT 18
++#define AR7241_GPIO_COUNT 20
+ #define AR913X_GPIO_COUNT 22
+ #define AR933X_GPIO_COUNT 30
+ #define AR934X_GPIO_COUNT 23
diff --git a/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch b/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch
new file mode 100644
index 000000000..9438844f2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch
@@ -0,0 +1,12 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,8 +62,8 @@ static void __init ar913x_wmac_setup(voi
+
+ static int ar933x_wmac_reset(void)
+ {
+- ath79_device_reset_clear(AR933X_RESET_WMAC);
+ ath79_device_reset_set(AR933X_RESET_WMAC);
++ ath79_device_reset_clear(AR933X_RESET_WMAC);
+
+ return 0;
+ }
diff --git a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch b/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch
new file mode 100644
index 000000000..a3d049889
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ b/arch/mips/include/asm/mach-ath79/pci.h
+@@ -16,13 +16,13 @@
+ #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
+ int ar71xx_pcibios_init(void);
+ #else
+-static inline int ar71xx_pcibios_init(void) { return 0 };
++static inline int ar71xx_pcibios_init(void) { return 0; }
+ #endif
+
+ #if defined(CONFIG_PCI_AR724X)
+ int ar724x_pcibios_init(int irq);
+ #else
+-static inline int ar724x_pcibios_init(int irq) { return 0 };
++static inline int ar724x_pcibios_init(int irq) { return 0; }
+ #endif
+
+ #endif /* __ASM_MACH_ATH79_PCI_H */
diff --git a/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch
new file mode 100644
index 000000000..36e30c246
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/401-mtd-physmap-add-lock-unlock.patch
@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -29,6 +29,66 @@ struct physmap_flash_info {
+ struct map_info map[MAX_RESOURCES];
+ };
+
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++ return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++ struct platform_device *pdev;
++ struct physmap_flash_data *physmap_data;
++
++ pdev = physmap_map2pdev(map);
++ physmap_data = pdev->dev.platform_data;
++ physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++ struct platform_device *pdev;
++ struct physmap_flash_data *physmap_data;
++
++ pdev = physmap_map2pdev(map);
++ physmap_data = pdev->dev.platform_data;
++ physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++ map_word ret;
++
++ physmap_lock(map);
++ ret = inline_map_read(map, ofs);
++ physmap_unlock(map);
++
++ return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++ unsigned long ofs)
++{
++ physmap_lock(map);
++ inline_map_write(map, d, ofs);
++ physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++ unsigned long from, ssize_t len)
++{
++ physmap_lock(map);
++ inline_map_copy_from(map, to, from, len);
++ physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++ const void *from, ssize_t len)
++{
++ physmap_lock(map);
++ inline_map_copy_to(map, to, from, len);
++ physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+ struct physmap_flash_info *info;
+@@ -141,6 +201,13 @@ static int physmap_flash_probe(struct pl
+
+ simple_map_init(&info->map[i]);
+
++ if (physmap_data->lock && physmap_data->unlock) {
++ info->map[i].read = physmap_flash_read_lock;
++ info->map[i].write = physmap_flash_write_lock;
++ info->map[i].copy_from = physmap_flash_copy_from_lock;
++ info->map[i].copy_to = physmap_flash_copy_to_lock;
++ }
++
+ probe_type = rom_probe_types;
+ if (physmap_data->probe_type == NULL) {
+ for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -26,6 +26,8 @@ struct physmap_flash_data {
+ unsigned int width;
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
++ void (*lock)(struct platform_device *);
++ void (*unlock)(struct platform_device *);
+ void (*set_vpp)(struct platform_device *, int);
+ unsigned int nr_parts;
+ unsigned int pfow_base;
diff --git a/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch
new file mode 100644
index 000000000..246abd5dc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/402-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160 0x2782
+ #define SST39VF1601 0x234b
+ #define SST39VF3201 0x235b
++#define SST39VF6401B 0x236d
+ #define SST39WF1601 0x274b
+ #define SST39WF1602 0x274a
+ #define SST39LF512 0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x10000,64),
+ }
+ }, {
++ .mfr_id = CFI_MFR_SST,
++ .dev_id = SST39VF6401B,
++ .name = "SST 39VF6401B",
++ .devtypes = CFI_DEVICETYPE_X16,
++ .uaddr = MTD_UADDR_0xAAAA_0x5555,
++ .dev_size = SIZE_8MiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x10000,128)
++ }
++ }, {
+ .mfr_id = CFI_MFR_ST,
+ .dev_id = M29F800AB,
+ .name = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644
index 000000000..9ed059822
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/403-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str
+ break;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, datum))
++ goto enable_xip;
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str
+
+ ret = -EIO;
+ }
++
++ enable_xip:
+ xip_enable(map, chip, adr);
+ op_done:
+ chip->state = FL_READY;
+@@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru
+ return 0;
+ }
+
+-
+ /*
+ * Handle devices with one erase region, that only implement
+ * the chip erase command.
+@@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, map_word_ff(map)))
++ goto op_done;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ xip_enable(map, chip, adr);
+ put_chip(map, chip, adr);
+@@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr)) {
++ if (chip_good(map, adr, map_word_ff(map))) {
+ xip_enable(map, chip, adr);
+- break;
++ goto op_done;
+ }
+
+ if (time_after(jiffies, timeo)) {
+@@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ put_chip(map, chip, adr);
+ mutex_unlock(&chip->mutex);
diff --git a/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch
new file mode 100644
index 000000000..75bfbc315
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/404-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -156,6 +156,12 @@ config MTD_BCM63XX_PARTS
+ This provides partions parsing for BCM63xx devices with CFE
+ bootloaders.
+
++config MTD_WRT160NL_PARTS
++ tristate "Linksys WRT160NL partitioning support"
++ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++ ---help---
++ Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch
new file mode 100644
index 000000000..021491591
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/405-mtd-tp-link-partition-parser.patch
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -158,7 +158,7 @@ config MTD_BCM63XX_PARTS
+
+ config MTD_WRT160NL_PARTS
+ tristate "Linksys WRT160NL partitioning support"
+- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++ depends on ATH79_MACH_WRT160NL
+ ---help---
+ Linksys WRT160NL partitioning support
+
+@@ -178,6 +178,12 @@ config MTD_MYLOADER_PARTS
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
++config MTD_TPLINK_PARTS
++ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++ depends on ATH79
++ ---help---
++ TBD.
++
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
+ obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch
new file mode 100644
index 000000000..86d953580
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/406-mtd-m25p80-allow-to-specify-max-read-size.patch
@@ -0,0 +1,112 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -100,6 +100,7 @@ struct m25p {
+ u16 addr_width;
+ u8 erase_opcode;
+ u8 *command;
++ size_t max_read_len;
+ };
+
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -352,6 +353,7 @@ static int m25p80_read(struct mtd_info *
+ struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_transfer t[2];
+ struct spi_message m;
++ loff_t ofs;
+
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
+@@ -374,8 +376,6 @@ static int m25p80_read(struct mtd_info *
+ t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+ spi_message_add_tail(&t[0], &m);
+
+- t[1].rx_buf = buf;
+- t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ /* Byte count starts at zero. */
+@@ -383,13 +383,6 @@ static int m25p80_read(struct mtd_info *
+
+ mutex_lock(&flash->lock);
+
+- /* Wait till previous write/erase is done. */
+- if (wait_till_ready(flash)) {
+- /* REVISIT status return?? */
+- mutex_unlock(&flash->lock);
+- return 1;
+- }
+-
+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
+ * clocks; and at this writing, every chip this driver handles
+ * supports that opcode.
+@@ -397,11 +390,44 @@ static int m25p80_read(struct mtd_info *
+
+ /* Set up the write data buffer. */
+ flash->command[0] = OPCODE_READ;
+- m25p_addr2cmd(flash, from, flash->command);
+
+- spi_sync(flash->spi, &m);
++ ofs = 0;
++ while (len) {
++ size_t readlen;
++ size_t done;
++ int ret;
++
++ ret = wait_till_ready(flash);
++ if (ret) {
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ if (flash->max_read_len > 0 &&
++ flash->max_read_len < len)
++ readlen = flash->max_read_len;
++ else
++ readlen = len;
++
++ t[1].rx_buf = buf + ofs;
++ t[1].len = readlen;
++
++ m25p_addr2cmd(flash, from + ofs, flash->command);
++
++ spi_sync(flash->spi, &m);
+
+- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
++ done = m.actual_length - m25p_cmdsz(flash) -
++ FAST_READ_DUMMY_BYTE;
++ if (done != readlen) {
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ ofs += done;
++ len -= done;
++ }
++
++ *retlen = ofs;
+
+ mutex_unlock(&flash->lock);
+
+@@ -924,6 +950,12 @@ static int __devinit m25p_probe(struct s
+ flash->mtd.erase = m25p80_erase;
+ flash->mtd.read = m25p80_read;
+
++ if (data && data->max_read_len) {
++ flash->max_read_len = data->max_read_len;
++ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
++ flash->max_read_len);
++ }
++
+ /* sst flash chips use AAI word program */
+ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
+ flash->mtd.write = sst_write;
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -25,6 +25,7 @@ struct flash_platform_data {
+
+ char *type;
+
++ size_t max_read_len;
+ /* we'll likely add more ... use JEDEC IDs, etc */
+ };
+
diff --git a/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
new file mode 100644
index 000000000..950bb239f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1016,7 +1016,9 @@ static int __devinit m25p_probe(struct s
+ /* partitions should match sector boundaries; and it may be good to
+ * use readonly partitions for writeprotected sectors (BP2..BP0).
+ */
+- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++ return mtd_device_parse_register(&flash->mtd,
++ data ? data->part_probes : NULL,
++ &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+ unsigned int nr_parts;
+
+ char *type;
++ const char **part_probes;
+
+ size_t max_read_len;
+ /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch
new file mode 100644
index 000000000..9d7a696f1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/408-mtd-redboot_partition_scan.patch
@@ -0,0 +1,45 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -79,6 +79,11 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+ while (mtd_can_have_bb(master) &&
+@@ -86,6 +91,7 @@ static int parse_redboot_partitions(stru
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+@@ -99,10 +105,6 @@ static int parse_redboot_partitions(stru
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+@@ -175,6 +177,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch
new file mode 100644
index 000000000..e1a339890
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/409-mtd-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -536,4 +536,8 @@ config MTD_NAND_FSMC
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
++config MTD_NAND_RB4XX
++ tristate "NAND flash driver for RouterBoard 4xx series"
++ depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch
new file mode 100644
index 000000000..d67f720d6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/410-mtd-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -540,4 +540,8 @@ config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATH79_MACH_RB4XX
+
++config MTD_NAND_RB750
++ tristate "NAND flash driver for the RouterBoard 750"
++ depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 000000000..e4e879b5b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/411-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_WORD_RETRIES 3
+
+@@ -50,7 +50,9 @@
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ struct map_info *map = mtd->priv;
+@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
+ mtd->write = cfi_amdstd_write_buffers;
+ }
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1374,6 +1378,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const u_char *buf,
+ int len)
+@@ -1485,7 +1490,6 @@ static int __xipram do_write_buffer(stru
+ return ret;
+ }
+
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1564,6 +1568,7 @@ static int cfi_amdstd_write_buffers(stru
+
+ return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /*
+ * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch
new file mode 100644
index 000000000..f11713316
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/420-net-ar71xx_mac_driver.patch
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ default y
+- depends on PCI
++ depends on (PCI || ATH79)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+@@ -67,4 +67,6 @@ config ATL1C
+ To compile this driver as a module, choose M here. The module
+ will be called atl1c.
+
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch
new file mode 100644
index 000000000..78d7e0e3e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/421-net-ksz8041_phy_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -124,6 +124,11 @@ config RTL8306_PHY
+ tristate "Driver for Realtek RTL8306S switches"
+ select SWCONFIG
+
++config MICREL_PHY
++ tristate "Drivers for Micrel/Kendin PHYs"
++ ---help---
++ Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_MICREL_PHY) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
diff --git a/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch
new file mode 100644
index 000000000..3e3902bac
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/422-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+
+ trailer = skb_tail_pointer(skb) - 4;
+ if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ goto out_drop;
+
+ source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch
new file mode 100644
index 000000000..bfb0b8e75
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/423-dsa-add-88e6063-driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -12,6 +12,13 @@ config NET_DSA_MV88E6060
+ This enables support for the Marvell 88E6060 ethernet switch
+ chip.
+
++config NET_DSA_MV88E6063
++ bool "Marvell 88E6063 ethernet switch chip support"
++ select NET_DSA_TAG_TRAILER
++ ---help---
++ This enables support for the Marvell 88E6063 ethernet switch
++ chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65
diff --git a/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch
new file mode 100644
index 000000000..e081087f2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/430-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -51,8 +51,8 @@ obj-$(CONFIG_IDE) += ide/
+ obj-$(CONFIG_SCSI) += scsi/
+ obj-$(CONFIG_ATA) += ata/
+ obj-$(CONFIG_TARGET_CORE) += target/
+-obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPI) += spi/
++obj-$(CONFIG_MTD) += mtd/
+ obj-y += net/
+ obj-$(CONFIG_ATM) += atm/
+ obj-$(CONFIG_FUSION) += message/
diff --git a/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch
new file mode 100644
index 000000000..722f65980
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/431-spi-add-various-flags.patch
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -452,6 +452,8 @@ struct spi_transfer {
+ dma_addr_t rx_dma;
+
+ unsigned cs_change:1;
++ unsigned verify:1;
++ unsigned fast_write:1;
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
+@@ -493,6 +495,7 @@ struct spi_message {
+ struct spi_device *spi;
+
+ unsigned is_dma_mapped:1;
++ unsigned fast_read:1;
+
+ /* REVISIT: we might want a flag affecting the behavior of the
+ * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch
new file mode 100644
index 000000000..6cfe2e832
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/432-spi-rb4xx-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -288,6 +288,12 @@ config SPI_PXA2XX
+ config SPI_PXA2XX_PCI
+ def_bool SPI_PXA2XX && X86_32 && PCI
+
++config SPI_RB4XX
++ tristate "Mikrotik RB4XX SPI master"
++ depends on SPI_MASTER && ATH79_MACH_RB4XX
++ help
++ SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
+ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch
new file mode 100644
index 000000000..579315b3a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/433-spi-rb4xx-cpld-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -439,6 +439,13 @@ config SPI_TLE62X0
+ sysfs interface, with each line presented as a kind of GPIO
+ exposing both switch control and diagnostic feedback.
+
++config SPI_RB4XX_CPLD
++ tristate "MikroTik RB4XX CPLD driver"
++ depends on ATH79_MACH_RB4XX
++ help
++ SPI driver for the Xilinx CPLD chip present on the
++ MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch
new file mode 100644
index 000000000..b4dbcd470
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/434-spi-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
++obj-$(CONFIG_SPI_AP83) += spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
+ obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -59,6 +59,14 @@ config SPI_ALTERA
+ help
+ This is the driver for the Altera SPI Controller.
+
++config SPI_AP83
++ tristate "Atheros AP83 specific SPI Controller"
++ depends on SPI_MASTER && ATH79_MACH_AP83
++ select SPI_BITBANG
++ help
++ This is a specific SPI controller driver for the Atheros AP83
++ reference board.
++
+ config SPI_ATH79
+ tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+ depends on ATH79 && GENERIC_GPIO
diff --git a/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch
new file mode 100644
index 000000000..14626879b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/435-spi-vsc7385_driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -454,6 +454,11 @@ config SPI_RB4XX_CPLD
+ SPI driver for the Xilinx CPLD chip present on the
+ MikroTik RB4xx boards.
+
++config SPI_VSC7385
++ tristate "Vitesse VSC7385 ethernet switch driver"
++ help
++ SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -61,5 +61,5 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
+ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
+ obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
+-
diff --git a/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch
new file mode 100644
index 000000000..88d09089d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/440-leds-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -418,6 +418,13 @@ config LEDS_TRIGGERS
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
++config LEDS_WNDR3700_USB
++ tristate "NETGEAR WNDR3700 USB LED driver"
++ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++ help
++ This option enables support for the USB LED found on the
++ NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
+ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch
new file mode 100644
index 000000000..e8073a2e8
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/441-leds-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -425,6 +425,10 @@ config LEDS_WNDR3700_USB
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
++config LEDS_RB750
++ tristate "LED driver for the Mikrotik RouterBOARD 750"
++ depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644
index 000000000..1e67abfdd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/450-gpio-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -489,4 +489,13 @@ config GPIO_TPS65910
+ help
+ Select this option to enable GPIO driver for the TPS65910
+ chip family.
++
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++ tristate "NXP 74HC153 Dual 4-input multiplexer"
++ help
++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++ provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2
+ obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
+ obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o
++obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
+ obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
diff --git a/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch
new file mode 100644
index 000000000..f269763ed
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/500-MIPS-fw-myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -175,6 +175,7 @@ endif
+ #
+ libs-$(CONFIG_ARC) += arch/mips/fw/arc/
+ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
+ libs-y += arch/mips/fw/lib/
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -981,6 +981,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ bool
+
++config MYLOADER
++ bool
++
+ config SYNC_R4K
+ bool
+
diff --git a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
new file mode 100644
index 000000000..8ac50ea2a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
@@ -0,0 +1,81 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
+
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+
+ static struct resource ath79_wmac_resources[] = {
+@@ -116,7 +118,7 @@ static void ar934x_wmac_setup(void)
+ ath79_wmac_data.is_clk_25mhz = true;
+ }
+
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+@@ -131,5 +133,10 @@ void __init ath79_register_wmac(u8 *cal_
+ memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ sizeof(ath79_wmac_data.eeprom_data));
+
++ if (mac_addr) {
++ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++ ath79_wmac_data.macaddr = ath79_wmac_mac;
++ }
++
+ platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
+ ap81_gpio_keys);
+ ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+ ARRAY_SIZE(ap81_spi_info));
+- ath79_register_wmac(cal_data);
++ ath79_register_wmac(cal_data, NULL);
+ ath79_register_usb();
+ }
+
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -153,7 +153,7 @@ static void __init db120_setup(void)
+ ath79_register_spi(&db120_spi_data, db120_spi_info,
+ ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
+ ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+ ARRAY_SIZE(ap121_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(cal_data);
++ ath79_register_wmac(cal_data, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch
new file mode 100644
index 000000000..9b16c424f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/502-MIPS-ath79-export-ath79_gpio_base.patch
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -25,7 +25,9 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include "common.h"
+
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -99,6 +99,7 @@ static inline int soc_is_ar934x(void)
+ }
+
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+
diff --git a/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch
new file mode 100644
index 000000000..2c9cad128
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/503-MIPS-ath79-add-flash-acquire-release.patch
@@ -0,0 +1,37 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -22,6 +22,7 @@
+ #include "common.h"
+
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -107,3 +108,16 @@ void ath79_device_reset_clear(u32 mask)
+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++void ath79_flash_acquire(void)
++{
++ mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++ mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -126,4 +126,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
+
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
++
+ #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch
new file mode 100644
index 000000000..5179a53de
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/504-MIPS-ath79-add-ath79_device_reset_get.patch
@@ -0,0 +1,45 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -125,6 +125,7 @@ static inline u32 ath79_reset_rr(unsigne
+
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+
+ void ath79_flash_acquire(void);
+ void ath79_flash_release(void);
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -109,6 +109,32 @@ void ath79_device_reset_clear(u32 mask)
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+
++u32 ath79_device_reset_get(u32 mask)
++{
++ unsigned long flags;
++ u32 reg;
++ u32 ret;
++
++ if (soc_is_ar71xx())
++ reg = AR71XX_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar724x())
++ reg = AR724X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar913x())
++ reg = AR913X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar933x())
++ reg = AR933X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar934x())
++ reg = AR934X_RESET_REG_RESET_MODULE;
++ else
++ BUG();
++
++ spin_lock_irqsave(&ath79_device_reset_lock, flags);
++ ret = ath79_reset_rr(reg);
++ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++ return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
+ void ath79_flash_acquire(void)
+ {
+ mutex_lock(&ath79_flash_mutex);
diff --git a/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch
new file mode 100644
index 000000000..6b09fc0a9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/505-MIPS-ath79-add-ath79_gpio_function_select.patch
@@ -0,0 +1,47 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -184,6 +184,34 @@ void ath79_gpio_function_setup(u32 set,
+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+ }
+
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++ void __iomem *base = ath79_gpio_base;
++ unsigned long flags;
++ unsigned int reg;
++ u32 t, s;
++
++ BUG_ON(!soc_is_ar934x());
++
++ if (gpio >= AR934X_GPIO_COUNT)
++ return;
++
++ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++ s = 8 * (gpio % 4);
++
++ spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++ t = __raw_readl(base + reg);
++ t &= ~(0xff << s);
++ t |= val << s;
++ __raw_writel(t, base + reg);
++
++ /* flush write */
++ (void) __raw_readl(base + reg);
++
++ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void __init ath79_gpio_init(void)
+ {
+ int err;
diff --git a/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch
new file mode 100644
index 000000000..aab959b90
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/506-MIPS-ath79-prom-parse-redboot-args.patch
@@ -0,0 +1,86 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,8 @@
+
+ #include "common.h"
+
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
+ static inline int is_valid_ram_addr(void *addr)
+ {
+ if (((u32) addr > KSEG0) &&
+@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
+ return 0;
+ }
+
++static void __init ath79_prom_append_cmdline(const char *name,
++ const char *value)
++{
++ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++ " %s=%s", name, value);
++ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++static const char * __init ath79_prom_find_env(char **envp, const char *name)
++{
++ const char *ret = NULL;
++ int len;
++ char **p;
++
++ if (!is_valid_ram_addr(envp))
++ return NULL;
++
++ len = strlen(name);
++ for (p = envp; is_valid_ram_addr(*p); p++) {
++ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
++ ret = *p + len + 1;
++ break;
++ }
++
++ /* RedBoot env comes in pointer pairs - key, value */
++ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
++ if (is_valid_ram_addr(*(++p))) {
++ ret = *p;
++ break;
++ }
++ }
++
++ return ret;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ int i;
+@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
+
+ void __init prom_init(void)
+ {
++ const char *env;
++ char **envp;
++
+ ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
++
++ envp = (char **)fw_arg2;
++ if (!strstr(arcs_cmdline, "ethaddr=")) {
++ env = ath79_prom_find_env(envp, "ethaddr");
++ if (env)
++ ath79_prom_append_cmdline("ethaddr", env);
++ }
++
++ if (!strstr(arcs_cmdline, "board=")) {
++ env = ath79_prom_find_env(envp, "board");
++ if (env) {
++ /* Workaround for buggy bootloaders */
++ if (strcmp(env, "RouterStation") == 0 ||
++ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++ env = "UBNT-RS";
++
++ if (strcmp(env, "RouterStation PRO") == 0)
++ env = "UBNT-RSPRO";
++
++ ath79_prom_append_cmdline("board", env);
++ }
++ }
+ }
+
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch
new file mode 100644
index 000000000..137bf6b84
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/507-MIPS-ath79-prom-add-myloader-support.patch
@@ -0,0 +1,55 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -16,6 +16,7 @@
+
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
++#include <asm/fw/myloader/myloader.h>
+
+ #include "common.h"
+
+@@ -69,6 +70,34 @@ static const char * __init ath79_prom_fi
+ return ret;
+ }
+
++static int __init ath79_prom_init_myloader(void)
++{
++ struct myloader_info *mylo;
++ char mac_buf[32];
++ unsigned char *mac;
++
++ mylo = myloader_get_info();
++ if (!mylo)
++ return 0;
++
++ switch (mylo->did) {
++ case DEVID_COMPEX_WP543:
++ ath79_prom_append_cmdline("board", "WP543");
++ break;
++ default:
++ pr_warn("prom: unknown device id: %x\n", mylo->did);
++ return 0;
++ }
++
++ mac = mylo->macs[0];
++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++ ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++ return 1;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ int i;
+@@ -88,6 +117,9 @@ void __init prom_init(void)
+ const char *env;
+ char **envp;
+
++ if (ath79_prom_init_myloader())
++ return;
++
+ ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+
+ envp = (char **)fw_arg2;
diff --git a/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch
new file mode 100644
index 000000000..062e513a3
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/508-MIPS-ath79-prom-image-command-line-hack.patch
@@ -0,0 +1,57 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
+ return ret;
+ }
+
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++ char *p = __image_cmdline;
++ int replace = 0;
++
++ if (*p == '-') {
++ replace = 1;
++ p++;
++ }
++
++ if (*p == '\0')
++ return 0;
++
++ if (replace) {
++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++ } else {
++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++ }
++
++ return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+ struct myloader_info *mylo;
+@@ -95,6 +124,8 @@ static int __init ath79_prom_init_myload
+
+ ath79_prom_append_cmdline("ethaddr", mac_buf);
+
++ ath79_use_image_cmdline();
++
+ return 1;
+ }
+
+@@ -102,6 +133,9 @@ static __init void ath79_prom_init_cmdli
+ {
+ int i;
+
++ if (ath79_use_image_cmdline())
++ return;
++
+ if (!is_valid_ram_addr(argv))
+ return;
+
diff --git a/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch
new file mode 100644
index 000000000..8b7e2d488
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/509-MIPS-ath79-process-board-kernel-option.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -215,6 +215,8 @@ void __init plat_time_init(void)
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+ }
+
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+ ath79_gpio_init();
diff --git a/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
new file mode 100644
index 000000000..2d2235e29
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++ .led_pin = -1,
++};
+
+ static struct resource ath79_wmac_resources[] = {
+ {
diff --git a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch
new file mode 100644
index 000000000..4d948bb29
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch
@@ -0,0 +1,231 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -20,7 +20,13 @@
+ #include <linux/io.h>
+ #include <linux/bitops.h>
+
++#define AR71XX_PCI_MEM_BASE 0x10000000
++#define AR71XX_PCI_MEM_SIZE 0x08000000
+ #define AR71XX_APB_BASE 0x18000000
++#define AR71XX_GE0_BASE 0x19000000
++#define AR71XX_GE0_SIZE 0x10000
++#define AR71XX_GE1_BASE 0x1a000000
++#define AR71XX_GE1_SIZE 0x10000
+ #define AR71XX_EHCI_BASE 0x1b000000
+ #define AR71XX_EHCI_SIZE 0x1000
+ #define AR71XX_OHCI_BASE 0x1c000000
+@@ -40,6 +46,8 @@
+ #define AR71XX_PLL_SIZE 0x100
+ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE 0x100
++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE 0x100
+
+ #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
+ #define AR7240_USB_CTRL_SIZE 0x100
+@@ -56,11 +64,15 @@
+
+ #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE 0x14
++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE 0x04
+ #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE 0x20000
+ #define AR933X_EHCI_BASE 0x1b000000
+ #define AR933X_EHCI_SIZE 0x1000
+
++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE 0x14
+ #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE 0x20000
+ #define AR934X_EHCI_BASE 0x1b000000
+@@ -120,6 +132,9 @@
+ #define AR71XX_AHB_DIV_SHIFT 20
+ #define AR71XX_AHB_DIV_MASK 0x7
+
++#define AR71XX_ETH0_PLL_SHIFT 17
++#define AR71XX_ETH1_PLL_SHIFT 19
++
+ #define AR724X_PLL_REG_CPU_CONFIG 0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG 0x18
+
+@@ -132,6 +147,8 @@
+ #define AR724X_DDR_DIV_SHIFT 22
+ #define AR724X_DDR_DIV_MASK 0x3
+
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG 0x00
+ #define AR913X_PLL_REG_ETH_CONFIG 0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -144,6 +161,9 @@
+ #define AR913X_AHB_DIV_SHIFT 19
+ #define AR913X_AHB_DIV_MASK 0x1
+
++#define AR913X_ETH0_PLL_SHIFT 20
++#define AR913X_ETH1_PLL_SHIFT 22
++
+ #define AR933X_PLL_CPU_CONFIG_REG 0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG 0x08
+
+@@ -285,7 +305,11 @@
+ #define AR913X_RESET_USB_HOST BIT(5)
+ #define AR913X_RESET_USB_PHY BIT(4)
+
++#define AR933X_RESET_GE1_MDIO BIT(23)
++#define AR933X_RESET_GE0_MDIO BIT(22)
++#define AR933X_RESET_GE1_MAC BIT(13)
+ #define AR933X_RESET_WMAC BIT(11)
++#define AR933X_RESET_GE0_MAC BIT(9)
+ #define AR933X_RESET_USB_HOST BIT(5)
+ #define AR933X_RESET_USB_PHY BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+@@ -323,6 +347,8 @@
+ #define AR934X_RESET_MBOX BIT(1)
+ #define AR934X_RESET_I2S BIT(0)
+
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
+ #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
+@@ -427,6 +453,14 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE 0x24
+ #define AR71XX_GPIO_REG_FUNC 0x28
+
++#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1 0x30
++#define AR934X_GPIO_REG_OUT_FUNC2 0x34
++#define AR934X_GPIO_REG_OUT_FUNC3 0x38
++#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5 0x40
++#define AR934X_GPIO_REG_FUNC 0x6c
++
+ #define AR71XX_GPIO_COUNT 16
+ #define AR7240_GPIO_COUNT 18
+ #define AR7241_GPIO_COUNT 20
+@@ -434,4 +468,124 @@
+ #define AR933X_GPIO_COUNT 30
+ #define AR934X_GPIO_COUNT 23
+
++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
++
++#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
++#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
++#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
++
++#define AR934X_GPIO_OUT_GPIO 0x00
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL 0x00
++#define AR71XX_MII_REG_MII1_CTRL 0x04
++
++#define AR71XX_MII_CTRL_IF_MASK 3
++#define AR71XX_MII_CTRL_SPEED_SHIFT 4
++#define AR71XX_MII_CTRL_SPEED_MASK 3
++#define AR71XX_MII_CTRL_SPEED_10 0
++#define AR71XX_MII_CTRL_SPEED_100 1
++#define AR71XX_MII_CTRL_SPEED_1000 2
++
++#define AR71XX_MII0_CTRL_IF_GMII 0
++#define AR71XX_MII0_CTRL_IF_MII 1
++#define AR71XX_MII0_CTRL_IF_RGMII 2
++#define AR71XX_MII0_CTRL_IF_RMII 3
++
++#define AR71XX_MII1_CTRL_IF_RGMII 0
++#define AR71XX_MII1_CTRL_IF_RMII 1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG 0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
++#define AR933X_ETH_CFG_MII_GE0 BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG 0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch
new file mode 100644
index 000000000..a29d79164
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/602-MIPS-ath79-add-openwrt-stuff.patch
@@ -0,0 +1,60 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -88,6 +88,20 @@ config SOC_AR934X
+ select PCI_AR724X if PCI
+ def_bool n
+
++config ATH79_DEV_M25P80
++ select ATH79_DEV_SPI
++ def_bool n
++
++config ATH79_DEV_AP9X_PCI
++ select ATH79_PCI_ATH9K_FIXUP
++ def_bool n
++
++config ATH79_DEV_DSA
++ def_bool n
++
++config ATH79_DEV_ETH
++ def_bool n
++
+ config PCI_AR724X
+ def_bool n
+
+@@ -107,4 +121,10 @@ config ATH79_DEV_WMAC
+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+ def_bool n
+
++config ATH79_NVRAM
++ def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++ def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,13 +17,23 @@ obj-$(CONFIG_PCI) += pci.o
+ # Devices
+ #
+ obj-y += dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
+ obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
+
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM) += nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
++
++#
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
diff --git a/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644
index 000000000..b8583d5a3
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
@@ -0,0 +1,240 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,23 @@
+ /*
+ * Atheros AP121 board support
+ *
+- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+
+ #define AP121_GPIO_LED_WLAN 0
+ #define AP121_GPIO_LED_USB 1
+@@ -24,7 +28,82 @@
+ #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
+
+-#define AP121_CAL_DATA_ADDR 0x1fff1000
++#define AP121_MAC0_OFFSET 0x0000
++#define AP121_MAC1_OFFSET 0x0006
++#define AP121_CALDATA_OFFSET 0x1000
++#define AP121_WMAC_MAC_OFFSET 0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN 0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET 11
++
++static struct mtd_partition ap121_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "rootfs",
++ .offset = 0x010000,
++ .size = 0x130000,
++ },
++ {
++ .name = "uImage",
++ .offset = 0x140000,
++ .size = 0x0a0000,
++ },
++ {
++ .name = "NVRAM",
++ .offset = 0x1e0000,
++ .size = 0x010000,
++ },
++ {
++ .name = "ART",
++ .offset = 0x1f0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++};
++
++static struct mtd_partition ap121_mini_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x2b0000,
++ },
++ {
++ .name = "uImage",
++ .offset = 0x300000,
++ .size = 0x0e0000,
++ },
++ {
++ .name = "NVRAM",
++ .offset = 0x3e0000,
++ .size = 0x010000,
++ },
++ {
++ .name = "ART",
++ .offset = 0x3f0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++};
++
++static struct flash_platform_data ap121_flash_data;
+
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+ {
+@@ -58,41 +137,84 @@ static struct gpio_keys_button ap121_gpi
+ }
+ };
+
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++ {
++ .name = "ap121:green:wlan",
++ .gpio = AP121_MINI_GPIO_LED_WLAN,
++ .active_low = 0,
++ },
+ };
+
+-static struct spi_board_info ap121_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l1606e",
+- .controller_data = &ap121_spi0_data,
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
++ {
++ .desc = "jumpstart button",
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
++ .active_low = 1,
++ },
++ {
++ .desc = "reset button",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP121_MINI_GPIO_BTN_RESET,
++ .active_low = 1,
+ }
+ };
+
+-static struct ath79_spi_platform_data ap121_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ ath79_register_m25p80(&ap121_flash_data);
++ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++ art + AP121_WMAC_MAC_OFFSET);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++ ath79_register_mdio(0, 0x0);
++
++ /* LAN ports */
++ ath79_register_eth(1);
++
++ /* WAN port */
++ ath79_register_eth(0);
++}
+
+ static void __init ap121_setup(void)
+ {
+- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++ ap121_flash_data.parts = ap121_parts;
++ ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_parts);
++
++ ap121_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+ ap121_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap121_gpio_keys),
+ ap121_gpio_keys);
+-
+- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+- ARRAY_SIZE(ap121_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(cal_data, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+ ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++ ap121_flash_data.parts = ap121_mini_parts;
++ ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_mini_parts);
++
++ ap121_common_setup();
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++ ap121_mini_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ap121_mini_gpio_keys),
++ ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++ ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+ bool "Atheros AP121 reference board"
+ select SOC_AR933X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
++ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
diff --git a/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch
new file mode 100644
index 000000000..cc0d59846
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/604-MIPS-ath79-ap81-fixes.patch
@@ -0,0 +1,128 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+ * by the Free Software Foundation.
+ */
+
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+
+ #define AP81_GPIO_LED_STATUS 1
+ #define AP81_GPIO_LED_AOSS 3
+@@ -29,6 +33,37 @@
+
+ #define AP81_CAL_DATA_ADDR 0x1fff1000
+
++static struct mtd_partition ap81_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ }, {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ }, {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x500000,
++ }, {
++ .name = "uImage",
++ .offset = 0x550000,
++ .size = 0x100000,
++ }, {
++ .name = "ART",
++ .offset = 0x650000,
++ .size = 0x1b0000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++
++static struct flash_platform_data ap81_flash_data = {
++ .parts = ap81_partitions,
++ .nr_parts = ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+ {
+ .name = "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+ }
+ };
+
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "m25p64",
+- .controller_data = &ap81_spi0_data,
+- }
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+ u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+ ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap81_gpio_keys),
+ ap81_gpio_keys);
+- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+- ARRAY_SIZE(ap81_spi_info));
++ ath79_register_m25p80(&ap81_flash_data);
+ ath79_register_wmac(cal_data, NULL);
+ ath79_register_usb();
++
++ ath79_register_mdio(0, 0x0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth0_data.speed = SPEED_100;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++ ath79_eth0_data.has_ar8216 = 1;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth1_data.phy_mask = 0x10;
++
++ ath79_register_eth(0);
++ ath79_register_eth(1);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -18,9 +18,10 @@ config ATH79_MACH_AP121
+ config ATH79_MACH_AP81
+ bool "Atheros AP81 reference board"
+ select SOC_AR913X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
new file mode 100644
index 000000000..07b23dae0
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
@@ -0,0 +1,220 @@
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -37,17 +37,26 @@
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+
++#define DB120_GPIO_LED_USB 11
+ #define DB120_GPIO_LED_WLAN_5G 12
+ #define DB120_GPIO_LED_WLAN_2G 13
+ #define DB120_GPIO_LED_STATUS 14
+@@ -58,8 +67,50 @@
+ #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
+
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET 0
++#define DB120_MAC1_OFFSET 6
++#define DB120_WMAC_CALDATA_OFFSET 0x1000
++#define DB120_PCIE_CALDATA_OFFSET 0x5000
++
++static struct mtd_partition db120_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ },
++ {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x630000,
++ },
++ {
++ .name = "uImage",
++ .offset = 0x680000,
++ .size = 0x160000,
++ },
++ {
++ .name = "NVRAM",
++ .offset = 0x7E0000,
++ .size = 0x010000,
++ },
++ {
++ .name = "ART",
++ .offset = 0x7F0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++
++static struct flash_platform_data db120_flash_data = {
++ .parts = db120_partitions,
++ .nr_parts = ARRAY_SIZE(db120_partitions),
++};
+
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+ {
+@@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[]
+ .gpio = DB120_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
++ {
++ .name = "db120:green:usb",
++ .gpio = DB120_GPIO_LED_USB,
++ .active_low = 1,
++ }
+ };
+
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi
+ },
+ };
+
+-static struct ath79_spi_controller_data db120_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
+-};
+-
+-static struct spi_board_info db120_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "s25sl064a",
+- .controller_data = &db120_spi0_data,
+- }
+-};
+-
+-static struct ath79_spi_platform_data db120_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
++static void __init db120_gmac_setup(void)
+ {
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &db120_ath9k_data;
+- break;
+- }
++ void __iomem *base;
++ u32 t;
+
+- return 0;
+-}
++ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+- memcpy(db120_ath9k_data.eeprom_data, eeprom,
+- sizeof(db120_ath9k_data.eeprom_data));
++ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
++ AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
++ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+
+- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+- ath79_register_pci();
++ iounmap(base);
+ }
+-#else
+-static inline void db120_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+
+ static void __init db120_setup(void)
+ {
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
++ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++ ath79_register_m25p80(&db120_flash_data);
++
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+ db120_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(db120_gpio_keys),
+ db120_gpio_keys);
+- ath79_register_spi(&db120_spi_data, db120_spi_info,
+- ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++ db120_gmac_setup();
++
++ ath79_register_mdio(0, 0x0);
++ ath79_register_mdio(1, 0x0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++#if 0
++ /* GMAC0 is connected to an AR8327 switch */
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.speed = SPEED_1000;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++#else
++ /* GMAC0 is connected to PHY4 of the internal switch */
++ ath79_switch_data.phy4_mii_en = 1;
++
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.phy_mask = BIT(4);
++ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++#endif
++ ath79_register_eth(0);
++
++ /* GMAC1 is connected to the internal switch */
++ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++ ath79_eth1_data.speed = SPEED_1000;
++ ath79_eth1_data.duplex = DUPLEX_FULL;
++
++ ath79_register_eth(1);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -31,9 +31,11 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
diff --git a/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644
index 000000000..6f1829fd2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
@@ -0,0 +1,153 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+ * by the Free Software Foundation.
+ */
+
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+
+ #define PB44_GPIO_I2C_SCL 0
+ #define PB44_GPIO_I2C_SDA 1
+
++#define PB44_PCF8757_VSC7395_CS 0
++#define PB44_PCF8757_STEREO_CS 1
++#define PB44_PCF8757_SLIC_CS0 2
++#define PB44_PCF8757_SLIC_TEST 3
++#define PB44_PCF8757_SLIC_INT0 4
++#define PB44_PCF8757_SLIC_INT1 5
++#define PB44_PCF8757_SW_RESET 6
++#define PB44_PCF8757_SW_JUMP 8
++#define PB44_PCF8757_LED_JUMP1 9
++#define PB44_PCF8757_LED_JUMP2 10
++#define PB44_PCF8757_TP24 11
++#define PB44_PCF8757_TP25 12
++#define PB44_PCF8757_TP26 13
++#define PB44_PCF8757_TP27 14
++#define PB44_PCF8757_TP28 15
++
+ #define PB44_GPIO_EXP_BASE 16
++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+ .cs_line = 0,
+ };
+
++static struct ath79_spi_controller_data pb44_spi1_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
++ .cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++ udelay(10);
++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++ mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++ .reset = pb44_vsc7395_reset,
++ .ucode_name = "vsc7395_ucode_pb44.bin",
++ .mac_cfg = {
++ .tx_ipg = 6,
++ .bit2 = 1,
++ .clk_sel = 0,
++ },
++};
++
++static const char *pb44_part_probes[] = {
++ "RedBoot",
++ NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++ .part_probes = pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .platform_data = &pb44_flash_data,
+ .controller_data = &pb44_spi0_data,
+ },
++ {
++ .bus_num = 0,
++ .chip_select = 1,
++ .max_speed_hz = 25000000,
++ .modalias = "spi-vsc7385",
++ .platform_data = &pb44_vsc7395_data,
++ .controller_data = &pb44_spi1_data,
++ }
+ };
+
+ static struct ath79_spi_platform_data pb44_spi_data = {
+ .bus_num = 0,
+- .num_chipselect = 1,
++ .num_chipselect = 2,
+ };
+
++#define PB44_WAN_PHYMASK BIT(0)
++#define PB44_LAN_PHYMASK 0
++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+ i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+ ARRAY_SIZE(pb44_spi_info));
+ ath79_register_usb();
+ ath79_register_pci();
++
++ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++ ath79_register_eth(0);
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth1_data.speed = SPEED_1000;
++ ath79_eth1_data.duplex = DUPLEX_FULL;
++ ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++ ath79_register_eth(1);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -45,6 +45,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644
index 000000000..cc393a8e7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch
@@ -0,0 +1,109 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -57,9 +57,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -16,10 +16,11 @@
+
+ #include <asm/mach-ath79/irq.h>
+
+-#include "machtypes.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
+ #include "pci.h"
+
+ #define UBNT_XM_GPIO_LED_L1 0
+@@ -32,7 +33,7 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL 20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR 0x1fff1000
+
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
+-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l6405d",
+- .controller_data = &ubnt_xm_spi0_data,
+- }
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &ubnt_xm_eeprom_data;
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+- sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+ static void __init ubnt_xm_init(void)
+ {
++ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+
+@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+- ARRAY_SIZE(ubnt_xm_spi_info));
+-
+- ubnt_xm_pci_init();
++ ath79_register_m25p80(NULL);
++ ap91_pci_init(eeprom, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644
index 000000000..982860f56
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -0,0 +1,187 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -13,15 +13,17 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
+
+ #include <asm/mach-ath79/irq.h>
+
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
+ #include "machtypes.h"
+-#include "pci.h"
+
+ #define UBNT_XM_GPIO_LED_L1 0
+ #define UBNT_XM_GPIO_LED_L2 1
+@@ -37,19 +39,19 @@
+
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+- .name = "ubnt-xm:red:link1",
++ .name = "ubnt:red:link1",
+ .gpio = UBNT_XM_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:orange:link2",
++ .name = "ubnt:orange:link2",
+ .gpio = UBNT_XM_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:green:link3",
++ .name = "ubnt:green:link3",
+ .gpio = UBNT_XM_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:green:link4",
++ .name = "ubnt:green:link4",
+ .gpio = UBNT_XM_GPIO_LED_L4,
+ .active_low = 0,
+ },
+@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
++#define UBNT_M_WAN_PHYMASK BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+@@ -79,9 +85,99 @@ static void __init ubnt_xm_init(void)
+
+ ath79_register_m25p80(NULL);
+ ap91_pci_init(eeprom, NULL);
++
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++ ath79_register_eth(0);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ "UBNT-XM",
+ "Ubiquiti Networks XM (rev 1.0) board",
+ ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++ ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++ ubnt_xm_init();
++ ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++ ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++ ubnt_xm_init();
++ ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++ ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:green:globe",
++ .gpio = 0,
++ .active_low = 1,
++ }
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ ath79_register_m25p80(NULL);
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++ ath79_register_usb();
++
++ ap91_pci_init(ee, NULL);
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++ ubnt_airrouter_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++ ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:orange:dome",
++ .gpio = 1,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:dome",
++ .gpio = 0,
++ .active_low = 0,
++ }
++};
++
++static void __init ubnt_unifi_setup(void)
++{
++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ ath79_register_m25p80(NULL);
++
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++ ath79_register_eth(0);
++
++ ap91_pci_init(ee, NULL);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++ ubnt_unifi_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++ ubnt_unifi_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,9 +58,11 @@ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -21,6 +21,11 @@ enum ath79_mach_type {
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
++ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
++ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
++ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
++ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ };
+
diff --git a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
new file mode 100644
index 000000000..425b698be
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
@@ -0,0 +1,679 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -16,17 +16,81 @@
+
+ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
++ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
++ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
++ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
++ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
++ ATH79_MACH_AP83, /* Atheros AP83 */
++ ATH79_MACH_AP96, /* Atheros AP96 */
++ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
++ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
++ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
++ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
++ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
++ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
++ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
++ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
++ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
++ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
++ ATH79_MACH_OM2P, /* OpenMesh OM2P */
++ ATH79_MACH_PB42, /* Atheros PB42 */
++ ATH79_MACH_PB92, /* Atheros PB92 */
++ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
++ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
++ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
++ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
++ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
++ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
++ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
++ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
++ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
++ ATH79_MACH_RW2458N, /* Redwave RW2458N */
++ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
++ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
++ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
++ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
++ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
++ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
++ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
++ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
++ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
++ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
++ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
++ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
++ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
++ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
++ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
++ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
++ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
++ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
++ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
++ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
++ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
++ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
++ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
++ ATH79_MACH_WP543, /* Compex WP543 */
++ ATH79_MACH_WPE72, /* Compex WPE72 */
++ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
++ ATH79_MACH_WRT400N, /* Linksys WRT400N */
++ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
++ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
++ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
++ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
++ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ };
+
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -2,6 +2,52 @@ if ATH79
+
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
+
++config ATH79_MACH_ALFA_AP96
++ bool "ALFA Network AP96 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++ bool "ALFA Network Hornet-UB board support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++ bool "ALFA Network N2/N5 board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0258N
++ bool "Allnet ALL0258N support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++ bool "Atheros AP113 board support"
++ select SOC_AR724X
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_PB9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+ bool "Atheros AP121 reference board"
+ select SOC_AR933X
+@@ -28,6 +74,36 @@ config ATH79_MACH_AP81
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP81 reference board.
+
++config ATH79_MACH_AP83
++ bool "Atheros AP83 board support"
++ select SOC_AR913X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++ bool "Atheros AP96 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_AP121
++ bool "Atheros AP121 reference board"
++ select SOC_AR933X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP121 reference board.
++
+ config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
+@@ -42,6 +118,13 @@ config ATH79_MACH_DB120
+ Say 'Y' here if you want your kernel to support the
+ Atheros DB120 reference board.
+
++config ATH79_MACH_PB42
++ bool "Atheros PB42 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_M25P80
++
+ config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
+ Say 'Y' here if you want your kernel to support the
+ Atheros PB44 reference board.
+
++config ATH79_MACH_PB92
++ bool "Atheros PB92 board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_PB9X_PCI if PCI
++ select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++ bool "AzureWave AW-NR580 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_WHR_HP_G300N
++ bool "Buffalo WHR-HP-G300N board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_WZR_HP_AG300H
++ bool "Buffalo WZR-HP-AG300H board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++ bool "Buffalo WZR-HP-G300NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++ bool "Buffalo WZR-HP-G300NH2 board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++ bool "Buffalo WZR-HP-G450H board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WP543
++ bool "Compex WP543/WPJ543 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select MYLOADER
++
++config ATH79_MACH_WPE72
++ bool "Compex WPE72/WPE72NX board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select MYLOADER
++
++config ATH79_MACH_DIR_600_A1
++ bool "D-Link DIR-600 A1/DIR-615 E4 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++ bool "D-Link DIR-615 rev. C1 support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++ bool "D-Link DIR-825 rev. B1 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_JA76PF
++ bool "jjPlus JA76PF board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++ bool "jjPlus JWAP003 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++ bool "Linksys WRT160NL board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++ bool "Linksys WRT400N board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++
++config ATH79_MACH_RB4XX
++ bool "MikroTik RouterBOARD 4xx series support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++ bool "MikroTik RouterBOARD 750 support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++
++config ATH79_MACH_WNDR3700
++ bool "NETGEAR WNDR3700 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WNR2000
++ bool "NETGEAR WNR2000 board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM2P
++ bool "OpenMesh OM2P board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_MZK_W04NU
++ bool "Planex MZK-W04NU board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++ bool "Planex MZK-W300NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++ bool "Redwave RW2458N board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_EAP7660D
++ bool "Senao EAP7660D support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_MR11U
++ bool "TP-LINK TL-MR11U support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3020
++ bool "TP-LINK TL-MR3020 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++ bool "TP-LINK TL-MR3220/3420 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WA901ND
++ bool "TP-LINK TL-WA901ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++ bool "TP-LINK TL-WA901ND v2 support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR703N
++ bool "TP-LINK TL-WR703N support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++ bool "TP-LINK TL-WR741ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++ bool "TP-LINK TL-WR741ND v4 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++ bool "TP-LINK TL-WR841N v1 support"
++ select SOC_AR71XX
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR941ND
++ bool "TP-LINK TL-WR941ND support"
++ select SOC_AR913X
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++ bool "TP-LINK TL-WR1043ND support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++ bool "TP-LINK TL-WR2543N/ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++ bool "TRENDnet TEW-632BRP support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_UBNT
++ bool "Ubiquiti AR71xx based boards support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+
++config ATH79_MACH_ZCN_1523H
++ bool "Zcomax ZCN-1523H support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++ bool "Zyxel NBG460N/550N/550NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ endmenu
+
+ config SOC_AR71XX
+@@ -96,10 +560,6 @@ config SOC_AR934X
+ select PCI_AR724X if PCI
+ def_bool n
+
+-config ATH79_DEV_M25P80
+- select ATH79_DEV_SPI
+- def_bool n
+-
+ config ATH79_DEV_AP9X_PCI
+ select ATH79_PCI_ATH9K_FIXUP
+ def_bool n
+@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
+ config ATH79_DEV_ETH
+ def_bool n
+
+-config PCI_AR724X
++config ATH79_DEV_M25P80
++ select ATH79_DEV_SPI
++ def_bool n
++
++config ATH79_DEV_DSA
++ def_bool n
++
++config ATH79_DEV_ETH
+ def_bool n
+
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -135,4 +602,7 @@ config ATH79_NVRAM
+ config ATH79_PCI_ATH9K_FIXUP
+ def_bool n
+
++config PCI_AR724X
++ def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+ #
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
diff --git a/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch
new file mode 100644
index 000000000..0758c99e4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-TEW673GRU-support.patch
@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -491,6 +491,17 @@ config ATH79_MACH_TEW_632BRP
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
++config ATH79_MACH_TEW_673GRU
++ bool "TRENDnet TEW-673GRU support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_NVRAM
++
+ config ATH79_MACH_UBNT
+ bool "Ubiquiti AR71xx based boards support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -53,6 +53,7 @@ enum ath79_mach_type {
+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
++ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-
+ obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
diff --git a/target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch b/target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch
new file mode 100644
index 000000000..298135071
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/700-ar934x_fix_usb_reset.patch
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -188,16 +188,16 @@ static void __init ar934x_usb_setup(void
+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+ return;
+
+- ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
++ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_PHY);
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_HOST);
++ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+ udelay(1000);
+
+ ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
diff --git a/target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch b/target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch
new file mode 100644
index 000000000..64ffebfbe
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/710-ar934x_no_ddr_flush.patch
@@ -0,0 +1,49 @@
+--- a/arch/mips/ath79/dev-eth.c
++++ b/arch/mips/ath79/dev-eth.c
+@@ -331,6 +331,10 @@ static void ar934x_set_speed_ge1(int spe
+ /* TODO */
+ }
+
++static void ath79_ddr_no_flush(void)
++{
++}
++
+ static void ath79_ddr_flush_ge0(void)
+ {
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
+@@ -371,16 +375,6 @@ static void ar933x_ddr_flush_ge1(void)
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
+ }
+
+-static void ar934x_ddr_flush_ge0(void)
+-{
+- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0);
+-}
+-
+-static void ar934x_ddr_flush_ge1(void)
+-{
+- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1);
+-}
+-
+ static struct resource ath79_eth0_resources[] = {
+ {
+ .name = "mac_base",
+@@ -817,17 +811,16 @@ void __init ath79_register_eth(unsigned
+ if (id == 0) {
+ pdata->reset_bit = AR934X_RESET_GE0_MAC |
+ AR934X_RESET_GE0_MDIO;
+- pdata->ddr_flush =ar934x_ddr_flush_ge0;
+ pdata->set_speed = ar934x_set_speed_ge0;
+ } else {
+ pdata->reset_bit = AR934X_RESET_GE1_MAC |
+ AR934X_RESET_GE1_MDIO;
+- pdata->ddr_flush = ar934x_ddr_flush_ge1;
+ pdata->set_speed = ar934x_set_speed_ge1;
+
+ pdata->switch_data = &ath79_switch_data;
+ }
+
++ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
diff --git a/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch
new file mode 100644
index 000000000..39584aabf
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/901-mdio_bitbang_ignore_ta_value.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+- /* check the turnaround bit: the PHY should be driving it to zero */
+- if (mdiobb_get_bit(ctrl) != 0) {
+- /* PHY didn't drive TA low -- flush any bits it
+- * may be trying to send.
+- */
+- for (i = 0; i < 32; i++)
+- mdiobb_get_bit(ctrl);
+-
+- return 0xffff;
+- }
++ mdiobb_get_bit(ctrl);
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
diff --git a/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch
new file mode 100644
index 000000000..921cf194d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/902-unaligned_access_hacks.patch
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -12,6 +12,7 @@
+ #define _ASM_CHECKSUM_H
+
+ #include <linux/in6.h>
++#include <linux/unaligned/packed_struct.h>
+
+ #include <asm/uaccess.h>
+
+@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const
+ const unsigned int *stop = word + ihl;
+ unsigned int csum;
+ int carry;
++ unsigned int w;
+
+- csum = word[0];
+- csum += word[1];
+- carry = (csum < word[1]);
++ csum = __get_unaligned_cpu32(word++);
++
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[2];
+- carry = (csum < word[2]);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[3];
+- carry = (csum < word[3]);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- word += 4;
+ do {
+- csum += *word;
+- carry = (csum < *word);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+- word++;
+ } while (word != stop);
+
+ return csum_fold(csum);
+--- a/include/linux/ip.h
++++ b/include/linux/ip.h
+@@ -102,7 +102,7 @@ struct iphdr {
+ __be32 saddr;
+ __be32 daddr;
+ /*The options start here. */
+-};
++} __packed;
+
+ #ifdef __KERNEL__
+ #include <linux/skbuff.h>
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -126,7 +126,7 @@ struct ipv6hdr {
+
+ struct in6_addr saddr;
+ struct in6_addr daddr;
+-};
++} __packed;
+
+ #ifdef __KERNEL__
+ /*
+--- a/include/linux/tcp.h
++++ b/include/linux/tcp.h
+@@ -54,7 +54,7 @@ struct tcphdr {
+ __be16 window;
+ __sum16 check;
+ __be16 urg_ptr;
+-};
++} __packed;
+
+ /*
+ * The union cast uses a gcc extension to avoid aliasing problems
+--- a/include/linux/udp.h
++++ b/include/linux/udp.h
+@@ -24,7 +24,7 @@ struct udphdr {
+ __be16 dest;
+ __be16 len;
+ __sum16 check;
+-};
++} __packed;
+
+ /* UDP socket options */
+ #define UDP_CORK 1 /* Never send partially complete segments */
+--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+@@ -14,6 +14,7 @@
+ #include <linux/skbuff.h>
+ #include <linux/icmp.h>
+ #include <linux/sysctl.h>
++#include <linux/unaligned/packed_struct.h>
+ #include <net/route.h>
+ #include <net/ip.h>
+
+@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru
+ if (ap == NULL)
+ return false;
+
+- tuple->src.u3.ip = ap[0];
+- tuple->dst.u3.ip = ap[1];
++ tuple->src.u3.ip = __get_unaligned_cpu32(ap++);
++ tuple->dst.u3.ip = __get_unaligned_cpu32(ap);
+
+ return true;
+ }