summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c29
-rw-r--r--target/linux/ar7/files/arch/mips/ar7/vlynq.c257
-rw-r--r--target/linux/ar7/files/include/asm-mips/ar7/vlynq.h24
3 files changed, 212 insertions, 98 deletions
diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c
index 9f3b63d69..ffcfa62a1 100644
--- a/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c
+++ b/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c
@@ -143,7 +143,8 @@ static inline u32 vlynq_read(u32 val, int size) {
return val;
}
-static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
+static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
{
struct vlynq_device *dev;
struct vlynq_pci_private *priv;
@@ -194,7 +195,7 @@ static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where,
case PCI_BASE_ADDRESS_3:
resno = (where - PCI_BASE_ADDRESS_0) >> 2;
if (priv->sz_mask & (1 << resno)) {
- priv->sz_mask &= ~(1 << resno);
+ priv->sz_mask &= ~(1 << resno);
*val = priv->config->rx_mapping[resno].size;
} else {
*val = vlynq_get_mapped(dev, resno);
@@ -214,14 +215,15 @@ static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where,
*val = 1;
break;
default:
- printk("%s: Read of unknown register 0x%x (size %d)\n",
- dev->dev.bus_id, where, size);
+ printk(KERN_NOTICE "%s: Read of unknown register 0x%x "
+ "(size %d)\n", dev->dev.bus_id, where, size);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
return PCIBIOS_SUCCESSFUL;
}
-static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
{
struct vlynq_device *dev;
struct vlynq_pci_private *priv;
@@ -275,8 +277,9 @@ static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where
case PCI_ROM_ADDRESS:
break;
default:
- printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n",
- dev->dev.bus_id, where, size, val);
+ printk(KERN_NOTICE "%s: Write to unknown register 0x%x "
+ "(size %d) value=0x%x\n", dev->dev.bus_id, where, size,
+ val);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
return PCIBIOS_SUCCESSFUL;
@@ -309,6 +312,7 @@ static int vlynq_pci_probe(struct vlynq_device *dev)
if (result)
return result;
+ dev->divisor = vlynq_ldiv4;
result = vlynq_device_enable(dev);
if (result)
return result;
@@ -319,17 +323,17 @@ static int vlynq_pci_probe(struct vlynq_device *dev)
config = &known_devices[i];
if (!config) {
- printk("vlynq-pci: skipping unknown device "
- "%04x:%04x at %s\n", chip_id >> 16,
+ printk(KERN_DEBUG "vlynq-pci: skipping unknown device "
+ "%04x:%04x at %s\n", chip_id >> 16,
chip_id & 0xffff, dev->dev.bus_id);
result = -ENODEV;
goto fail;
}
- printk("vlynq-pci: attaching device %s at %s\n",
+ printk(KERN_NOTICE "vlynq-pci: attaching device %s at %s\n",
config->name, dev->dev.bus_id);
- priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
printk(KERN_ERR "%s: failed to allocate private data\n",
dev->dev.bus_id);
@@ -337,7 +341,6 @@ static int vlynq_pci_probe(struct vlynq_device *dev)
goto fail;
}
- memset(priv, 0, sizeof(struct vlynq_pci_private));
priv->latency = 64;
priv->cache_line = 32;
priv->config = config;
@@ -402,7 +405,7 @@ int vlynq_pci_init(void)
{
int res;
res = vlynq_register_driver(&vlynq_pci);
- if (res)
+ if (res)
return res;
register_pci_controller(&vlynq_controller);
diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq.c b/target/linux/ar7/files/arch/mips/ar7/vlynq.c
index 88e974653..76dbd55ef 100644
--- a/target/linux/ar7/files/arch/mips/ar7/vlynq.c
+++ b/target/linux/ar7/files/arch/mips/ar7/vlynq.c
@@ -20,42 +20,40 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/io.h>
-#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
#include <asm/ar7/vlynq.h>
-#define PER_DEVICE_IRQS 32
+#define PER_DEVICE_IRQS 32
-#define VLYNQ_CTRL_PM_ENABLE 0x80000000
-#define VLYNQ_CTRL_CLOCK_INT 0x00008000
-#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16)
-#define VLYNQ_CTRL_INT_LOCAL 0x00004000
-#define VLYNQ_CTRL_INT_ENABLE 0x00002000
-#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8)
-#define VLYNQ_CTRL_INT2CFG 0x00000080
-#define VLYNQ_CTRL_RESET 0x00000001
+#define VLYNQ_CTRL_PM_ENABLE 0x80000000
+#define VLYNQ_CTRL_CLOCK_INT 0x00008000
+#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16)
+#define VLYNQ_CTRL_INT_LOCAL 0x00004000
+#define VLYNQ_CTRL_INT_ENABLE 0x00002000
+#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8)
+#define VLYNQ_CTRL_INT2CFG 0x00000080
+#define VLYNQ_CTRL_RESET 0x00000001
-#define VLYNQ_STATUS_LINK 0x00000001
-#define VLYNQ_STATUS_LERROR 0x00000080
-#define VLYNQ_STATUS_RERROR 0x00000100
+#define VLYNQ_INT_OFFSET 0x00000014
+#define VLYNQ_REMOTE_OFFSET 0x00000080
-#define VINT_ENABLE 0x00000100
-#define VINT_TYPE_EDGE 0x00000080
-#define VINT_LEVEL_LOW 0x00000040
-#define VINT_VECTOR(x) ((x) & 0x1f)
-#define VINT_OFFSET(irq) (8 * ((irq) % 4))
+#define VLYNQ_STATUS_LINK 0x00000001
+#define VLYNQ_STATUS_LERROR 0x00000080
+#define VLYNQ_STATUS_RERROR 0x00000100
-#define VLYNQ_AUTONEGO_V2 0x00010000
+#define VINT_ENABLE 0x00000100
+#define VINT_TYPE_EDGE 0x00000080
+#define VINT_LEVEL_LOW 0x00000040
+#define VINT_VECTOR(x) ((x) & 0x1f)
+#define VINT_OFFSET(irq) (8 * ((irq) % 4))
+
+#define VLYNQ_AUTONEGO_V2 0x00010000
struct vlynq_regs {
u32 revision;
@@ -105,11 +103,11 @@ int vlynq_linked(struct vlynq_device *dev)
{
int i;
- for (i = 0; i < 10; i++)
+ for (i = 0; i < 100; i++)
if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
return 1;
else
- mdelay(1);
+ cpu_relax();
return 0;
}
@@ -143,7 +141,7 @@ static void vlynq_irq_mask(unsigned int irq)
static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
{
u32 val;
- struct vlynq_device *dev = irq_desc[irq].chip_data;
+ struct vlynq_device *dev = get_irq_chip_data(irq);
int virq;
BUG_ON(!dev);
@@ -171,28 +169,41 @@ static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
return 0;
}
+static void vlynq_local_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+ u32 status = vlynq_reg_read(dev->local->status);
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "%s: local status: 0x%08x\n",
+ dev->dev.bus_id, status);
+ vlynq_reg_write(dev->local->status, status);
+}
+
+static void vlynq_remote_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+ u32 status = vlynq_reg_read(dev->remote->status);
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
+ dev->dev.bus_id, status);
+ vlynq_reg_write(dev->remote->status, status);
+}
+
+#warning FIXME: process one irq per call
static irqreturn_t vlynq_irq(int irq, void *dev_id)
{
struct vlynq_device *dev = dev_id;
- u32 status, ack;
+ u32 status;
int virq = 0;
status = vlynq_reg_read(dev->local->int_status);
vlynq_reg_write(dev->local->int_status, status);
- if (status & (1 << dev->local_irq)) { /* Local vlynq IRQ. Ack */
- ack = vlynq_reg_read(dev->local->status);
- vlynq_reg_write(dev->local->status, ack);
- }
-
- if (status & (1 << dev->remote_irq)) { /* Remote vlynq IRQ. Ack */
- ack = vlynq_reg_read(dev->remote->status);
- vlynq_reg_write(dev->remote->status, ack);
- }
+ if (unlikely(!status))
+ spurious_interrupt();
- status &= ~((1 << dev->local_irq) | (1 << dev->remote_irq));
while (status) {
- if (status & 1) /* Remote device IRQ. Pass. */
+ if (status & 1)
do_IRQ(dev->irq_start + virq);
status >>= 1;
virq++;
@@ -208,40 +219,70 @@ static struct irq_chip vlynq_irq_chip = {
.set_type = vlynq_irq_type,
};
+static struct irq_chip vlynq_local_chip = {
+ .name = "vlynq local error",
+ .unmask = vlynq_irq_unmask,
+ .mask = vlynq_irq_mask,
+ .ack = vlynq_local_ack,
+};
+
+static struct irq_chip vlynq_remote_chip = {
+ .name = "vlynq local error",
+ .unmask = vlynq_irq_unmask,
+ .mask = vlynq_irq_mask,
+ .ack = vlynq_remote_ack,
+};
+
static int vlynq_setup_irq(struct vlynq_device *dev)
{
u32 val;
int i;
if (dev->local_irq == dev->remote_irq) {
- printk(KERN_WARNING
- "%s: local vlynq irq should be different from remote\n",
- dev->dev.bus_id);
+ printk(KERN_ERR
+ "%s: local vlynq irq should be different from remote\n",
+ dev->dev.bus_id);
return -EINVAL;
}
+ /* Clear local and remote error bits */
+ vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
+ vlynq_reg_write(dev->remote->status,
+ vlynq_reg_read(dev->remote->status));
+
+ /* Now setup interrupts */
val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
VLYNQ_CTRL_INT2CFG;
val |= vlynq_reg_read(dev->local->control);
- vlynq_reg_write(dev->local->int_ptr, 0x14);
+ vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
vlynq_reg_write(dev->local->control, val);
val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
val |= VLYNQ_CTRL_INT_ENABLE;
val |= vlynq_reg_read(dev->remote->control);
- vlynq_reg_write(dev->remote->int_ptr, 0x14);
+ vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
vlynq_reg_write(dev->remote->control, val);
for (i = 0; i < PER_DEVICE_IRQS; i++) {
- if ((i == dev->local_irq) || (i == dev->remote_irq))
- continue;
- set_irq_chip(dev->irq_start + i, &vlynq_irq_chip);
- set_irq_chip_data(dev->irq_start + i, dev);
- vlynq_reg_write(dev->remote->int_device[i >> 2], 0);
+ if (i == dev->local_irq) {
+ set_irq_chip_and_handler(dev->irq_start + i,
+ &vlynq_local_chip,
+ handle_level_irq);
+ set_irq_chip_data(dev->irq_start + i, dev);
+ } else if (i == dev->remote_irq) {
+ set_irq_chip_and_handler(dev->irq_start + i,
+ &vlynq_local_chip,
+ handle_level_irq);
+ set_irq_chip_data(dev->irq_start + i, dev);
+ } else {
+ set_irq_chip(dev->irq_start + i, &vlynq_irq_chip);
+ set_irq_chip_data(dev->irq_start + i, dev);
+ vlynq_reg_write(dev->remote->int_device[i >> 2], 0);
+ }
}
- if (request_irq(dev->irq, vlynq_irq, SA_SHIRQ, "vlynq", dev)) {
+ if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
return -EAGAIN;
}
@@ -280,7 +321,6 @@ int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
{
driver->driver.name = driver->name;
driver->driver.bus = &vlynq_bus_type;
-/* driver->driver.owner = owner;*/
return driver_register(&driver->driver);
}
EXPORT_SYMBOL(__vlynq_register_driver);
@@ -293,35 +333,86 @@ EXPORT_SYMBOL(vlynq_unregister_driver);
int vlynq_device_enable(struct vlynq_device *dev)
{
- u32 div;
- int result;
+ int i, result;
struct plat_vlynq_ops *ops = dev->dev.platform_data;
result = ops->on(dev);
if (result)
return result;
- vlynq_reg_write(dev->local->control, 0);
- vlynq_reg_write(dev->remote->control, 0);
-
-/*
- if (vlynq_linked(dev)) {
- printk(KERN_INFO "%s: linked (using external clock)\n",
- dev->dev.bus_id);
- return vlynq_setup_irq(dev);
- }
-*/
-
- for (div = 1; div <= 8; div++) {
- mdelay(20);
- vlynq_reg_write(dev->local->control, VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(div - 1));
+ switch (dev->divisor) {
+ case vlynq_div_auto:
+ /* First try locally supplied clock */
+ vlynq_reg_write(dev->remote->control, 0);
+ for (i = vlynq_ldiv1; i <= vlynq_ldiv8; i++) {
+ vlynq_reg_write(dev->local->control,
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using local clock divisor %d\n",
+ dev->dev.bus_id, i - vlynq_ldiv1 + 1);
+ return vlynq_setup_irq(dev);
+ }
+ }
+ /* Then remotely supplied clock */
+ vlynq_reg_write(dev->local->control, 0);
+ for (i = vlynq_rdiv1; i <= vlynq_rdiv8; i++) {
+ vlynq_reg_write(dev->remote->control,
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using remote clock divisor %d\n",
+ dev->dev.bus_id, i - vlynq_rdiv1 + 1);
+ return vlynq_setup_irq(dev);
+ }
+ }
+ /* At last, externally supplied clock */
+ vlynq_reg_write(dev->remote->control, 0);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG "%s: using external clock\n",
+ dev->dev.bus_id);
+ return vlynq_setup_irq(dev);
+ }
+ break;
+ case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
+ case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
vlynq_reg_write(dev->remote->control, 0);
+ vlynq_reg_write(dev->local->control,
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+ vlynq_ldiv1));
if (vlynq_linked(dev)) {
- printk(KERN_INFO "%s: linked (using internal clock, div: %d)\n",
- dev->dev.bus_id, div);
+ printk(KERN_DEBUG
+ "%s: using local clock divisor %d\n",
+ dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
return vlynq_setup_irq(dev);
}
+ break;
+ case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
+ case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
+ vlynq_reg_write(dev->local->control, 0);
+ vlynq_reg_write(dev->remote->control,
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+ vlynq_rdiv1));
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using remote clock divisor %d\n",
+ dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
+ return vlynq_setup_irq(dev);
+ }
+ break;
+ case vlynq_div_external:
+ vlynq_reg_write(dev->local->control, 0);
+ vlynq_reg_write(dev->remote->control, 0);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG "%s: using external clock\n",
+ dev->dev.bus_id);
+ return vlynq_setup_irq(dev);
+ }
+ break;
}
return -ENODEV;
@@ -369,9 +460,6 @@ int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
return -EINVAL;
- if ((virq == dev->local_irq) || (virq == dev->remote_irq))
- return -EINVAL;
-
return dev->irq_start + virq;
}
@@ -430,9 +518,10 @@ static int vlynq_probe(struct platform_device *pdev)
if (!irq_res)
return -ENODEV;
- dev = kzalloc(sizeof(struct vlynq_device), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
- printk(KERN_ERR "vlynq: failed to allocate device structure\n");
+ printk(KERN_ERR
+ "vlynq: failed to allocate device structure\n");
return -ENOMEM;
}
@@ -452,20 +541,21 @@ static int vlynq_probe(struct platform_device *pdev)
len = regs_res->end - regs_res->start;
if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
printk(KERN_ERR "%s: Can't request vlynq registers\n",
- dev->dev.bus_id);
+ dev->dev.bus_id);
result = -ENXIO;
goto fail_request;
}
- dev->local = ioremap_nocache(regs_res->start, len);
+ dev->local = ioremap(regs_res->start, len);
if (!dev->local) {
printk(KERN_ERR "%s: Can't remap vlynq registers\n",
- dev->dev.bus_id);
+ dev->dev.bus_id);
result = -ENXIO;
goto fail_remap;
}
- dev->remote = (struct vlynq_regs *)((u32)dev->local + 128);
+ dev->remote = (struct vlynq_regs *)((u32)dev->local +
+ VLYNQ_REMOTE_OFFSET);
dev->irq = platform_get_irq_byname(pdev, "irq");
dev->irq_start = irq_res->start;
@@ -484,8 +574,8 @@ static int vlynq_probe(struct platform_device *pdev)
return 0;
fail_register:
-fail_remap:
iounmap(dev->local);
+fail_remap:
fail_request:
release_mem_region(regs_res->start, len);
kfree(dev);
@@ -497,6 +587,7 @@ static int vlynq_remove(struct platform_device *pdev)
struct vlynq_device *dev = platform_get_drvdata(pdev);
device_unregister(&dev->dev);
+ iounmap(dev->local);
release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
kfree(dev);
@@ -520,7 +611,7 @@ EXPORT_SYMBOL(vlynq_bus_type);
#ifdef CONFIG_PCI
extern void vlynq_pci_init(void);
#endif
-static int __init vlynq_init(void)
+int __init vlynq_init(void)
{
int res = 0;
@@ -544,13 +635,13 @@ fail_bus:
return res;
}
-/*
+/* Add this back when vlynq-pci crap is gone */
+#if 0
void __devexit vlynq_exit(void)
{
platform_driver_unregister(&vlynq_driver);
bus_unregister(&vlynq_bus_type);
}
-*/
-
+#endif
subsys_initcall(vlynq_init);
diff --git a/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h b/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h
index 34b940759..12865bebb 100644
--- a/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h
+++ b/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h
@@ -16,7 +16,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
#ifndef __VLYNQ_H__
#define __VLYNQ_H__
@@ -29,13 +28,34 @@ struct vlynq_device_id {
u32 id;
};
+enum vlynq_divisor {
+ vlynq_div_auto = 0,
+ vlynq_ldiv1,
+ vlynq_ldiv2,
+ vlynq_ldiv3,
+ vlynq_ldiv4,
+ vlynq_ldiv5,
+ vlynq_ldiv6,
+ vlynq_ldiv7,
+ vlynq_ldiv8,
+ vlynq_rdiv1,
+ vlynq_rdiv2,
+ vlynq_rdiv3,
+ vlynq_rdiv4,
+ vlynq_rdiv5,
+ vlynq_rdiv6,
+ vlynq_rdiv7,
+ vlynq_rdiv8,
+ vlynq_div_external
+};
+
struct vlynq_regs;
struct vlynq_device {
u32 id;
int irq;
int local_irq;
int remote_irq;
- int clock_div;
+ enum vlynq_divisor divisor;
u32 regs_start, regs_end;
u32 mem_start, mem_end;
u32 irq_start, irq_end;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 01:05:40 +0000