summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c25
1 files changed, 21 insertions, 4 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
index ae95febd3..4fdb9fb5b 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
@@ -19,6 +19,7 @@
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@@ -36,6 +37,9 @@
#define DIR825B1_GPIO_BTN_RESET 3
#define DIR825B1_GPIO_BTN_POWERSAVE 8
+#define DIR825B1_GPIO_RTL8366_SDA 5
+#define DIR825B1_GPIO_RTL8366_SCK 7
+
#define DIR825B1_BUTTONS_POLL_INTERVAL 20
#define DIR825B1_CAL_LOCATION_0 0x1f661000
@@ -137,6 +141,19 @@ static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
}
};
+static struct rtl8366_smi_platform_data dir825b1_rtl8366_smi_data = {
+ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
+ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device dir825b1_rtl8366_smi_device = {
+ .name = "rtl8366-smi",
+ .id = -1,
+ .dev = {
+ .platform_data = &dir825b1_rtl8366_smi_data,
+ }
+};
+
#ifdef CONFIG_PCI
static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
{
@@ -267,16 +284,15 @@ static void __init dir825b1_setup(void)
ar71xx_add_device_mdio(0x0);
+ ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.phy_mask = 0x1e;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+ ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth1_data.phy_mask = 0xc0;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
ar71xx_add_device_eth(0);
@@ -294,6 +310,7 @@ static void __init dir825b1_setup(void)
ar71xx_add_device_usb();
+ platform_device_register(&dir825b1_rtl8366_smi_device);
dir825b1_pci_init();
}