diff options
Diffstat (limited to 'target/linux')
4 files changed, 114 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 6759cf043..420d69024 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -150,6 +150,7 @@ get_status_led() { wlae-ag300n) status_led="buffalo:green:status" ;; + wzr-hp-ag300h | \ wzr-hp-g300nh2) status_led="buffalo:red:diag" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix new file mode 100644 index 000000000..102415009 --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix @@ -0,0 +1,51 @@ +#!/bin/sh + +# For AR9220 and AR9223, GPIO JTAG must explicit be disabled +# before LEDs start working. Do this when wifi device is +# detected. + +# +# $DEVPATH is not valid for some boards (including WZR-HP-AG300H). +# Manipulate the $DEVPATH to reach the corresponding phyN. +# + +devdir=`dirname $DEVPATH` +devdir=`dirname $devdir` +phydir=/sys$devdir/ieee80211 +phyname=`cat $phydir/phy*/name` + +if [ -z $phyname -o $ACTION != "add" ]; then exit 0; fi + +# +# ar922x_disable_gpio_jtag(): +# +# Emulate +# REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); +# for AR9220 and AR9223. +# + +ar922x_disable_gpio_jtag() +{ + local regidx=0x4054 + + [ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] && { + echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx + regval=`cat /sys/kernel/debug/ieee80211/$1/ath9k/regval` + regval=$((regval | 0x20000)) + echo regval $regval + echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval + } +} + +if [ $phyname -a $ACTION = "add" ]; then + + . /lib/ar71xx.sh + + case $(ar71xx_board_name) in + wzr-hp-ag300h) + ar922x_disable_gpio_jtag $phyname + ;; + esac; +fi + +exit 0 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index 5e2548e52..0082ffe89 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -165,6 +165,12 @@ wlae-ag300n) ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" ;; +wzr-hp-ag300h) + ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" + ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" + ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1" + ;; + wzr-hp-g300nh) ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c index 5941d5ca9..868514c95 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c @@ -75,6 +75,47 @@ static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { }, }; +static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = { + { + .name = "buffalo:amber:band2g", + .gpio = 1, + .active_low = 1, + }, + { + .name = "buffalo:green:usb", + .gpio = 3, + .active_low = 1, + }, + { + .name = "buffalo:green:band2g", + .gpio = 5, + .active_low = 1, + }, +}; + +static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = { + { + .name = "buffalo:green:band5g", + .gpio = 1, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 3, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine", + .gpio = 4, + .active_low = 1, + }, + { + .name = "buffalo:amber:band5g", + .gpio = 5, + .active_low = 1, + }, +}; + static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { { .desc = "reset", @@ -111,6 +152,13 @@ static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, .gpio = 7, .active_low = 1, + }, { + .desc = "movie_engine", + .type = EV_KEY, + .code = BTN_7, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 1, } }; @@ -150,6 +198,14 @@ static void __init wzrhpag300h_setup(void) ath79_register_m25p80_multi(&wzrhpag300h_flash_data); ap94_pci_init(eeprom1, mac1, eeprom2, mac2); + + ap9x_pci_setup_wmac_led_pin(0, 1); + ap9x_pci_setup_wmac_led_pin(1, 5); + + ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio, + ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio)); + ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio, + ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio)); } MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", |