diff options
Diffstat (limited to 'target/linux/ubicom32/files/drivers/net')
| -rw-r--r-- | target/linux/ubicom32/files/drivers/net/ubi32-eth.c | 760 | ||||
| -rw-r--r-- | target/linux/ubicom32/files/drivers/net/ubi32-eth.h | 132 |
2 files changed, 892 insertions, 0 deletions
diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c new file mode 100644 index 000000000..e6c7392e0 --- /dev/null +++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c @@ -0,0 +1,760 @@ +/* + * drivers/net/ubi32-eth.c + * Ubicom32 ethernet TIO interface driver. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * ubi32_eth.c + * Ethernet driver for Ip5k/Ip7K + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/moduleparam.h> + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/interrupt.h> + +#include <linux/in.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/mii.h> +#include <linux/if_vlan.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <asm/checksum.h> +#include <asm/ip5000.h> +#include <asm/devtree.h> +#include <asm/system.h> + +#define UBICOM32_USE_NAPI /* define this to use NAPI instead of tasklet */ +//#define UBICOM32_USE_POLLING /* define this to use polling instead of interrupt */ +#include "ubi32-eth.h" + +/* + * TODO: + * mac address from flash + * multicast filter + * ethtool support + * sysfs support + * skb->nrfrag support + * ioctl + * monitor phy status + */ + +extern int ubi32_ocm_skbuf_max, ubi32_ocm_skbuf, ubi32_ddr_skbuf; +static const char *eth_if_name[UBI32_ETH_NUM_OF_DEVICES] = + {"eth_lan", "eth_wan"}; +static struct net_device *ubi32_eth_devices[UBI32_ETH_NUM_OF_DEVICES] = + {NULL, NULL}; +static u8_t mac_addr[UBI32_ETH_NUM_OF_DEVICES][ETH_ALEN] = { + {0x00, 0x03, 0x64, 'l', 'a', 'n'}, + {0x00, 0x03, 0x64, 'w', 'a', 'n'}}; + +#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB)) +static inline struct sk_buff *ubi32_alloc_skb_ocm(struct net_device *dev, unsigned int length) +{ + return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA); +} +#endif + +static inline struct sk_buff *ubi32_alloc_skb(struct net_device *dev, unsigned int length) +{ + return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN); +} + +static void ubi32_eth_vp_rxtx_enable(struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + priv->regs->command = UBI32_ETH_VP_CMD_RX_ENABLE | UBI32_ETH_VP_CMD_TX_ENABLE; + priv->regs->int_mask = (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX); + ubicom32_set_interrupt(priv->vp_int_bit); +} + +static void ubi32_eth_vp_rxtx_stop(struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + priv->regs->command = 0; + priv->regs->int_mask = 0; + ubicom32_set_interrupt(priv->vp_int_bit); + + /* Wait for graceful shutdown */ + while (priv->regs->status & (UBI32_ETH_VP_STATUS_RX_STATE | UBI32_ETH_VP_STATUS_TX_STATE)); +} + +/* + * ubi32_eth_tx_done() + */ +static int ubi32_eth_tx_done(struct net_device *dev) +{ + struct ubi32_eth_private *priv; + struct sk_buff *skb; + volatile void *pdata; + struct ubi32_eth_dma_desc *desc; + u32_t count = 0; + + priv = netdev_priv(dev); + + priv->regs->int_status &= ~UBI32_ETH_VP_INT_TX; + while (priv->tx_tail != priv->regs->tx_out) { + pdata = priv->regs->tx_dma_ring[priv->tx_tail]; + BUG_ON(pdata == NULL); + + skb = container_of((void *)pdata, struct sk_buff, cb); + desc = (struct ubi32_eth_dma_desc *)pdata; + if (unlikely(!(desc->status & UBI32_ETH_VP_TX_OK))) { + dev->stats.tx_errors++; + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + } + dev_kfree_skb_any(skb); + priv->regs->tx_dma_ring[priv->tx_tail] = NULL; + priv->tx_tail = (priv->tx_tail + 1) & TX_DMA_RING_MASK; + count++; + } + + if (unlikely(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) { + spin_lock(&priv->lock); + if (priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL) { + priv->regs->status &= ~UBI32_ETH_VP_STATUS_TX_Q_FULL; + netif_wake_queue(dev); + } + spin_unlock(&priv->lock); + } + return count; +} + +/* + * ubi32_eth_receive() + * To avoid locking overhead, this is called only + * by tasklet when not using NAPI, or + * by NAPI poll when using NAPI. + * return number of frames processed + */ +static int ubi32_eth_receive(struct net_device *dev, int quota) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + unsigned short rx_in = priv->regs->rx_in; + struct sk_buff *skb; + struct ubi32_eth_dma_desc *desc = NULL; + volatile void *pdata; + + int extra_reserve_adj; + int extra_alloc = UBI32_ETH_RESERVE_SPACE + UBI32_ETH_TRASHED_MEMORY; + int replenish_cnt, count = 0; + int replenish_max = RX_DMA_MAX_QUEUE_SIZE; +#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB)) + if (likely(dev == ubi32_eth_devices[0])) + replenish_max = min(ubi32_ocm_skbuf_max, RX_DMA_MAX_QUEUE_SIZE);; +#endif + + if (unlikely(rx_in == priv->regs->rx_out)) + priv->vp_stats.rx_q_full_cnt++; + + priv->regs->int_status &= ~UBI32_ETH_VP_INT_RX; + while (priv->rx_tail != priv->regs->rx_out) { + if (unlikely(count == quota)) { + /* There is still frame pending to be processed */ + priv->vp_stats.rx_throttle++; + break; + } + + pdata = priv->regs->rx_dma_ring[priv->rx_tail]; + BUG_ON(pdata == NULL); + + desc = (struct ubi32_eth_dma_desc *)pdata; + skb = container_of((void *)pdata, struct sk_buff, cb); + count++; + priv->regs->rx_dma_ring[priv->rx_tail] = NULL; + priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK); + + /* + * Check only RX_OK bit here. + * The rest of status word is used as timestamp + */ + if (unlikely(!(desc->status & UBI32_ETH_VP_RX_OK))) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb); + continue; + } + + skb_put(skb, desc->data_len); + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + dev->stats.rx_bytes += skb->len; + dev->stats.rx_packets++; +#ifndef UBICOM32_USE_NAPI + netif_rx(skb); +#else + netif_receive_skb(skb); +#endif + } + + /* fill in more descripor for VP*/ + replenish_cnt = replenish_max - + ((RX_DMA_RING_SIZE + rx_in - priv->rx_tail) & RX_DMA_RING_MASK); + if (replenish_cnt > 0) { +#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB)) + /* + * black magic for perforamnce: + * Try to allocate skb from OCM only for first Ethernet I/F. + * Also limit number of RX buffers to 21 due to limited OCM. + */ + if (likely(dev == ubi32_eth_devices[0])) { + do { + skb = ubi32_alloc_skb_ocm(dev, RX_BUF_SIZE + extra_alloc); + if (!skb) { + break; + } + /* set up dma descriptor */ + ubi32_ocm_skbuf++; + desc = (struct ubi32_eth_dma_desc *)skb->cb; + extra_reserve_adj = + ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) & + (CACHE_LINE_SIZE - 1); + skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj); + desc->data_pointer = skb->data; + desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY; + desc->data_len = 0; + desc->status = 0; + priv->regs->rx_dma_ring[rx_in] = desc; + rx_in = (rx_in + 1) & RX_DMA_RING_MASK; + } while (--replenish_cnt > 0); + } +#endif + + while (replenish_cnt-- > 0) { + skb = ubi32_alloc_skb(dev, RX_BUF_SIZE + extra_alloc); + if (!skb) { + priv->vp_stats.rx_alloc_err++; + break; + } + /* set up dma descriptor */ + ubi32_ddr_skbuf++; + desc = (struct ubi32_eth_dma_desc *)skb->cb; + extra_reserve_adj = + ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) & + (CACHE_LINE_SIZE - 1); + skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj); + desc->data_pointer = skb->data; + desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY; + desc->data_len = 0; + desc->status = 0; + priv->regs->rx_dma_ring[rx_in] = desc; + rx_in = (rx_in + 1) & RX_DMA_RING_MASK; + } + + wmb(); + priv->regs->rx_in = rx_in; + ubicom32_set_interrupt(priv->vp_int_bit); + } + + if (likely(count > 0)) { + dev->last_rx = jiffies; + } + return count; +} + +#ifdef UBICOM32_USE_NAPI +static int ubi32_eth_napi_poll(struct napi_struct *napi, int budget) +{ + struct ubi32_eth_private *priv = container_of(napi, struct ubi32_eth_private, napi); + struct net_device *dev = priv->dev; + u32_t count; + + if (priv->tx_tail != priv->regs->tx_out) { + ubi32_eth_tx_done(dev); + } + + count = ubi32_eth_receive(dev, budget); + + if (count < budget) { + napi_complete(napi); + priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX); + if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) { + if (napi_reschedule(napi)) { + priv->regs->int_mask = 0; + } + } + } + return count; +} + +#else +static void ubi32_eth_do_tasklet(unsigned long arg) +{ + struct net_device *dev = (struct net_device *)arg; + struct ubi32_eth_private *priv = netdev_priv(dev); + + if (priv->tx_tail != priv->regs->tx_out) { + ubi32_eth_tx_done(dev); + } + + /* always call receive to process new RX frame as well as replenish RX buffers */ + ubi32_eth_receive(dev, UBI32_RX_BOUND); + + priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX); + if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) { + priv->regs->int_mask = 0; + tasklet_schedule(&priv->tsk); + } +} +#endif + +#if defined(UBICOM32_USE_POLLING) +static struct timer_list eth_poll_timer; + +static void ubi32_eth_poll(unsigned long arg) +{ + struct net_device *dev; + struct ubi32_eth_private *priv; + int i; + + for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) { + dev = ubi32_eth_devices[i]; + if (dev && (dev->flags & IFF_UP)) { + priv = netdev_priv(dev); +#ifdef UBICOM32_USE_NAPI + napi_schedule(&priv->napi); +#else + tasklet_schedule(&priv->tsk); +#endif + } + } + + eth_poll_timer.expires = jiffies + 2; + add_timer(ð_poll_timer); +} + +#else +static irqreturn_t ubi32_eth_interrupt(int irq, void *dev_id) +{ + struct ubi32_eth_private *priv; + + struct net_device *dev = (struct net_device *)dev_id; + BUG_ON(irq != dev->irq); + + priv = netdev_priv(dev); + if (unlikely(!(priv->regs->int_status & priv->regs->int_mask))) { + return IRQ_NONE; + } + + /* + * Disable port interrupt + */ +#ifdef UBICOM32_USE_NAPI + if (napi_schedule_prep(&priv->napi)) { + priv->regs->int_mask = 0; + __napi_schedule(&priv->napi); + } +#else + priv->regs->int_mask = 0; + tasklet_schedule(&priv->tsk); +#endif + return IRQ_HANDLED; +} +#endif + +/* + * ubi32_eth_open + */ +static int ubi32_eth_open(struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + int err; + + printk(KERN_INFO "eth open %s\n",dev->name); +#ifndef UBICOM32_USE_POLLING + /* request_region() */ + err = request_irq(dev->irq, ubi32_eth_interrupt, IRQF_DISABLED, dev->name, dev); + if (err) { + printk(KERN_WARNING "fail to request_irq %d\n",err); + return -ENODEV; + } +#endif +#ifdef UBICOM32_USE_NAPI + napi_enable(&priv->napi); +#else + tasklet_init(&priv->tsk, ubi32_eth_do_tasklet, (unsigned long)dev); +#endif + + /* call receive to supply RX buffers */ + ubi32_eth_receive(dev, RX_DMA_MAX_QUEUE_SIZE); + + /* check phy status and call netif_carrier_on */ + ubi32_eth_vp_rxtx_enable(dev); + netif_start_queue(dev); + return 0; +} + +static int ubi32_eth_close(struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + volatile void *pdata; + struct sk_buff *skb; + +#ifndef UBICOM32_USE_POLLING + free_irq(dev->irq, dev); +#endif + netif_stop_queue(dev); /* can't transmit any more */ +#ifdef UBICOM32_USE_NAPI + napi_disable(&priv->napi); +#else + tasklet_kill(&priv->tsk); +#endif + ubi32_eth_vp_rxtx_stop(dev); + + /* + * RX clean up + */ + while (priv->rx_tail != priv->regs->rx_in) { + pdata = priv->regs->rx_dma_ring[priv->rx_tail]; + skb = container_of((void *)pdata, struct sk_buff, cb); + priv->regs->rx_dma_ring[priv->rx_tail] = NULL; + dev_kfree_skb_any(skb); + priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK); + } + priv->regs->rx_in = 0; + priv->regs->rx_out = priv->regs->rx_in; + priv->rx_tail = priv->regs->rx_in; + + /* + * TX clean up + */ + BUG_ON(priv->regs->tx_out != priv->regs->tx_in); + ubi32_eth_tx_done(dev); + BUG_ON(priv->tx_tail != priv->regs->tx_in); + priv->regs->tx_in = 0; + priv->regs->tx_out = priv->regs->tx_in; + priv->tx_tail = priv->regs->tx_in; + + return 0; +} + +/* + * ubi32_eth_set_config + */ +static int ubi32_eth_set_config(struct net_device *dev, struct ifmap *map) +{ + /* if must to down to config it */ + printk(KERN_INFO "set_config %x\n", dev->flags); + if (dev->flags & IFF_UP) + return -EBUSY; + + /* I/O and IRQ can not be changed */ + if (map->base_addr != dev->base_addr) { + printk(KERN_WARNING "%s: Can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + +#ifndef UBICOM32_USE_POLLING + if (map->irq != dev->irq) { + printk(KERN_WARNING "%s: Can't change IRQ\n", dev->name); + return -EOPNOTSUPP; + } +#endif + + /* ignore other fields */ + return 0; +} + +static int ubi32_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + struct ubi32_eth_dma_desc *desc = NULL; + unsigned short space, tx_in; + + tx_in = priv->regs->tx_in; + + dev->trans_start = jiffies; /* save the timestamp */ + space = TX_DMA_RING_MASK - ((TX_DMA_RING_SIZE + tx_in - priv->tx_tail) & TX_DMA_RING_MASK); + + if (unlikely(space == 0)) { + if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) { + spin_lock(&priv->lock); + if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) { + priv->regs->status |= UBI32_ETH_VP_STATUS_TX_Q_FULL; + priv->vp_stats.tx_q_full_cnt++; + netif_stop_queue(dev); + } + spin_unlock(&priv->lock); + } + + /* give both HW and this driver an extra trigger */ + priv->regs->int_mask |= UBI32_ETH_VP_INT_TX; +#ifndef UBICOM32_USE_POLLING + ubicom32_set_interrupt(dev->irq); +#endif + ubicom32_set_interrupt(priv->vp_int_bit); + + return NETDEV_TX_BUSY; + } + + /*still have room */ + desc = (struct ubi32_eth_dma_desc *)skb->cb; + desc->data_pointer = skb->data; + desc->data_len = skb->len; + priv->regs->tx_dma_ring[tx_in] = desc; + tx_in = ((tx_in + 1) & TX_DMA_RING_MASK); + wmb(); + priv->regs->tx_in = tx_in; + /* kick the HRT */ + ubicom32_set_interrupt(priv->vp_int_bit); + + return NETDEV_TX_OK; +} + +/* + * Deal with a transmit timeout. + */ +static void ubi32_eth_tx_timeout (struct net_device *dev) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + dev->stats.tx_errors++; + priv->regs->int_mask |= UBI32_ETH_VP_INT_TX; +#ifndef UBICOM32_USE_POLLING + ubicom32_set_interrupt(dev->irq); +#endif + ubicom32_set_interrupt(priv->vp_int_bit); +} + +static int ubi32_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(rq); + + printk(KERN_INFO "ioctl %s, %d\n", dev->name, cmd); + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = 0; + break; + + case SIOCGMIIREG: + if ((data->reg_num & 0x1F) == MII_BMCR) { + /* Make up MII control register value from what we know */ + data->val_out = 0x0000 + | ((priv->regs->status & UBI32_ETH_VP_STATUS_DUPLEX) + ? BMCR_FULLDPLX : 0) + | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED100) + ? BMCR_SPEED100 : 0) + | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED1000) + ? BMCR_SPEED1000 : 0); + } else if ((data->reg_num & 0x1F) == MII_BMSR) { + /* Make up MII status register value from what we know */ + data->val_out = + (BMSR_100FULL|BMSR_100HALF|BMSR_10FULL|BMSR_10HALF) + | ((priv->regs->status & UBI32_ETH_VP_STATUS_LINK) + ? BMSR_LSTATUS : 0); + } else { + return -EIO; + } + break; + + case SIOCSMIIREG: + return -EOPNOTSUPP; + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +/* + * Return statistics to the caller + */ +static struct net_device_stats *ubi32_eth_get_stats(struct net_device *dev) +{ + return &dev->stats; +} + + +static int ubi32_eth_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ubi32_eth_private *priv = netdev_priv(dev); + unsigned long flags; + + if ((new_mtu < 68) || (new_mtu > 1500)) + return -EINVAL; + + spin_lock_irqsave(&priv->lock, flags); + dev->mtu = new_mtu; + spin_unlock_irqrestore(&priv->lock, flags); + printk(KERN_INFO "set mtu to %d", new_mtu); + return 0; +} + +/* + * ubi32_eth_cleanup: unload the module + */ +void ubi32_eth_cleanup(void) +{ + struct ubi32_eth_private *priv; + struct net_device *dev; + int i; + + for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) { + dev = ubi32_eth_devices[i]; + if (dev) { + priv = netdev_priv(dev); + kfree(priv->regs->tx_dma_ring); + unregister_netdev(dev); + free_netdev(dev); + ubi32_eth_devices[i] = NULL; + } + } +} + +int ubi32_eth_init_module(void) +{ + struct ethtionode *eth_node; + struct net_device *dev; + struct ubi32_eth_private *priv; + int i, err; + + /* + * Device allocation. + */ + err = 0; + for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) { + /* + * See if the eth_vp is in the device tree. + */ + eth_node = (struct ethtionode *)devtree_find_node(eth_if_name[i]); + if (!eth_node) { + printk(KERN_INFO "%s does not exist\n", eth_if_name[i]); + continue; + } + + eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc( + sizeof(struct ubi32_eth_dma_desc *) * + (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), + GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA); + + if (eth_node->tx_dma_ring == NULL) { + eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc( + sizeof(struct ubi32_eth_dma_desc *) * + (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_KERNEL); + printk(KERN_INFO "fail to allocate from OCM\n"); + } + + if (!eth_node->tx_dma_ring) { + err = -ENOMEM; + break; + } + eth_node->rx_dma_ring = eth_node->tx_dma_ring + TX_DMA_RING_SIZE; + eth_node->tx_sz = TX_DMA_RING_SIZE - 1; + eth_node->rx_sz = RX_DMA_RING_SIZE - 1; + + dev = alloc_etherdev(sizeof(struct ubi32_eth_private)); + if (!dev) { + kfree(eth_node->tx_dma_ring); + err = -ENOMEM; + break; + } + priv = netdev_priv(dev); + priv->dev = dev; + + /* + * This just fill in some default Ubicom MAC address + */ + memcpy(dev->dev_addr, mac_addr[i], ETH_ALEN); + memset(dev->broadcast, 0xff, ETH_ALEN); + + priv->regs = eth_node; + priv->regs->command = 0; + priv->regs->int_mask = 0; + priv->regs->int_status = 0; + priv->regs->tx_out = 0; + priv->regs->rx_out = 0; + priv->regs->tx_in = 0; + priv->regs->rx_in = 0; + priv->rx_tail = 0; + priv->tx_tail = 0; + + priv->vp_int_bit = eth_node->dn.sendirq; + dev->irq = eth_node->dn.recvirq; + + spin_lock_init(&priv->lock); + + dev->open = ubi32_eth_open; + dev->stop = ubi32_eth_close; + dev->hard_start_xmit = ubi32_eth_start_xmit; + dev->tx_timeout = ubi32_eth_tx_timeout; + dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT; + + dev->set_config = ubi32_eth_set_config; + dev->do_ioctl = ubi32_eth_ioctl; + dev->get_stats = ubi32_eth_get_stats; + dev->change_mtu = ubi32_eth_change_mtu; +#ifdef UBICOM32_USE_NAPI + netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT); +#endif + err = register_netdev(dev); + if (err) { + printk(KERN_WARNING "Failed to register netdev %s\n", eth_if_name[i]); + //release_region(); + free_netdev(dev); + kfree(eth_node->tx_dma_ring); + break; + } + + ubi32_eth_devices[i] = dev; + printk(KERN_INFO "%s vp_base:0x%p, tio_int:%d irq:%d feature:0x%lx\n", + dev->name, priv->regs, eth_node->dn.sendirq, dev->irq, dev->features); + } + + if (err) { + ubi32_eth_cleanup(); + return err; + } + + if (!ubi32_eth_devices[0] && !ubi32_eth_devices[1]) { + return -ENODEV; + } + +#if defined(UBICOM32_USE_POLLING) + init_timer(ð_poll_timer); + eth_poll_timer.function = ubi32_eth_poll; + eth_poll_timer.data = (unsigned long)0; + eth_poll_timer.expires = jiffies + 2; + add_timer(ð_poll_timer); +#endif + + return 0; +} + +module_init(ubi32_eth_init_module); +module_exit(ubi32_eth_cleanup); + +MODULE_AUTHOR("Kan Yan, Greg Ren"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.h b/target/linux/ubicom32/files/drivers/net/ubi32-eth.h new file mode 100644 index 000000000..c25500143 --- /dev/null +++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.h @@ -0,0 +1,132 @@ +/* + * drivers/net/ubi32-eth.h + * Ubicom32 ethernet TIO interface driver definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _UBI32_ETH_H +#define _UBI32_ETH_H + +#include <asm/devtree.h> + +#define UBI32_ETH_NUM_OF_DEVICES 2 + +/* + * Number of bytes trashed beyond the packet data. + */ +#define UBI32_ETH_TRASHED_MEMORY (CACHE_LINE_SIZE + ETH_HLEN - 1) + +/* + * Linux already reserves NET_SKB_PAD bytes of headroom in each sk_buff. + * We want to be able to reserve at least one cache line to align Ethernet + * and IP header to cache line. + * Note that the TIO expects a CACHE_LINE_SIZE - ETH_HLEN aligned Ethernet + * header, while satisfies NET_IP_ALIGN (= 2) automatically. + * (NET_SKB_PAD is 16, NET_IP_ALIGN is 2, CACHE_LINE_SIZE is 32). + * You can add more space by making UBI32_ETH_RESERVE_EXTRA != 0. + */ +#define UBI32_ETH_RESERVE_EXTRA (1 * CACHE_LINE_SIZE) +#define UBI32_ETH_RESERVE_SPACE (UBI32_ETH_RESERVE_EXTRA + CACHE_LINE_SIZE) + +struct ubi32_eth_dma_desc { + volatile void *data_pointer; /* pointer to the buffer */ + volatile u16 buffer_len; /* the buffer size */ + volatile u16 data_len; /* actual frame length */ + volatile u32 status; /* bit0: status to be update by VP; bit[31:1] time stamp */ +}; + +#define TX_DMA_RING_SIZE (1<<8) +#define TX_DMA_RING_MASK (TX_DMA_RING_SIZE - 1) +#define RX_DMA_RING_SIZE (1<<8) +#define RX_DMA_RING_MASK (RX_DMA_RING_SIZE - 1) + +#define RX_DMA_MAX_QUEUE_SIZE (RX_DMA_RING_SIZE - 1) /* no more than (RX_DMA_RING_SIZE - 1) */ +#define RX_MAX_PKT_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN) +#define RX_MIN_PKT_SIZE ETH_ZLEN +#define RX_BUF_SIZE (RX_MAX_PKT_SIZE + VLAN_HLEN) /* allow double VLAN tag */ + +#define UBI32_ETH_VP_TX_TIMEOUT (10*HZ) + +struct ubi32_eth_vp_stats { + u32 rx_alloc_err; + u32 tx_q_full_cnt; + u32 rx_q_full_cnt; + u32 rx_throttle; +}; + +struct ubi32_eth_private { + struct net_device *dev; + struct ubi32_eth_vp_stats vp_stats; + spinlock_t lock; +#ifdef UBICOM32_USE_NAPI + struct napi_struct napi; +#else + struct tasklet_struct tsk; +#endif + struct ethtionode *regs; + u16 rx_tail; + u16 tx_tail; + u32 vp_int_bit; +}; + +struct ethtionode { + struct devtree_node dn; + volatile u16 command; + volatile u16 status; + volatile u16 int_mask; /* interrupt mask */ + volatile u16 int_status; /* interrupt mask */ + volatile u16 tx_in; /* owned by driver */ + volatile u16 tx_out; /* owned by vp */ + volatile u16 rx_in; /* owned by driver */ + volatile u16 rx_out; /* owned by vp */ + u16 tx_sz; /* owned by driver */ + u16 rx_sz; /* owned by driver */ + struct ubi32_eth_dma_desc **tx_dma_ring; + struct ubi32_eth_dma_desc **rx_dma_ring; +}; + +#define UBI32_ETH_VP_STATUS_LINK (1<<0) +#define UBI32_ETH_VP_STATUS_SPEED100 (0x1<<1) +#define UBI32_ETH_VP_STATUS_SPEED1000 (0x1<<2) +#define UBI32_ETH_VP_STATUS_DUPLEX (0x1<<3) +#define UBI32_ETH_VP_STATUS_FLOW_CTRL (0x1<<4) + +#define UBI32_ETH_VP_STATUS_RX_STATE (0x1<<5) +#define UBI32_ETH_VP_STATUS_TX_STATE (0x1<<6) + +#define UBI32_ETH_VP_STATUS_TX_Q_FULL (1<<8) + +#define UBI32_ETH_VP_INT_RX (1<<0) +#define UBI32_ETH_VP_INT_TX (1<<1) + +#define UBI32_ETH_VP_CMD_RX_ENABLE (1<<0) +#define UBI32_ETH_VP_CMD_TX_ENABLE (1<<1) + +#define UBI32_ETH_VP_RX_OK (1<<0) +#define UBI32_ETH_VP_TX_OK (1<<1) + +#define UBI32_TX_BOUND TX_DMA_RING_SIZE +#define UBI32_RX_BOUND 64 +#define UBI32_ETH_NAPI_WEIGHT 64 /* for GigE */ +#endif |