diff options
Diffstat (limited to 'target/linux/storm/patches/1021-serial.patch')
| -rw-r--r-- | target/linux/storm/patches/1021-serial.patch | 2825 |
1 files changed, 2825 insertions, 0 deletions
diff --git a/target/linux/storm/patches/1021-serial.patch b/target/linux/storm/patches/1021-serial.patch new file mode 100644 index 000000000..90880d646 --- /dev/null +++ b/target/linux/storm/patches/1021-serial.patch @@ -0,0 +1,2825 @@ +Index: linux-2.6.23.16/drivers/serial/it8712.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/it8712.c 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,858 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $ ++ * ++ */ ++#include <linux/module.h> ++#include <linux/tty.h> ++#include <linux/ioport.h> ++#include <linux/init.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <asm/hardware.h> ++#include <asm/system.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++ ++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <linux/serial_core.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/int_ctrl.h> ++#include <asm/arch/it8712.h> ++#include "it8712.h" ++ ++//#define DEBUG 1 ++#define UART_NR 1 ++ ++#define SERIAL_IT8712_NAME "ttySI" ++#define SERIAL_IT8712_MAJOR 204 ++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define SERIAL_IT8712_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++#define LPC_HOST_CONTINUE_MODE 0x00000040 ++ ++#define IT8712_NO_PORTS UART_NR ++#define IT8712_ISR_PASS_LIMIT 256 ++ ++#define LPC_BUS_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4)) ++#define LPC_BUS_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4)) ++#define LPC_SERIAL_IRQ_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8)) ++#define LPC_SERIAL_IRQ_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c)) ++#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10)) ++#define LPC_SERIAL_IRQ_POLARITY *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14)) ++#define LPC_SERIAL_IRQ_ENABLE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18)) ++ ++ ++ ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable ++#define UART_GET_IER(p) inb(((p)->membase+UART_IER)) ++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding ++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer ++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status ++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status ++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control ++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR)) ++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control ++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR)) ++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control ++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM)) ++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM)) ++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL)) ++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL)) ++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++static void it8712_stop_tx(struct uart_port *port, u_int from_tty) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++} ++ ++static void it8712_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_RDI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MSI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs) ++{ ++ struct tty_struct *tty = port->info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ ++ // printk("it8712_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(port, ch, regs)) ++ goto ignore_char; ++ ++ error_return: ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(port)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ port->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void it8712_tx_chars(struct uart_port *port) ++{ ++ struct circ_buf *xmit = &port->info->xmit; ++ int count; ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { ++ it8712_stop_tx(port, 0); ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (uart_circ_empty(xmit)) ++ break; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++ ++ if (uart_circ_empty(xmit)) ++ it8712_stop_tx(port, 0); ++} ++ ++static void it8712_start_tx(struct uart_port *port, unsigned int tty_start) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++ it8712_tx_chars(port); ++} ++ ++static void it8712_modem_status(struct uart_port *port) ++{ ++ unsigned int status; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DDCD) ++ uart_handle_dcd_change(port, status & UART_MSR_DCD); ++ ++ if (status & UART_MSR_DDSR) ++ port->icount.dsr++; ++ ++ if (status & UART_MSR_DCTS) ++ uart_handle_cts_change(port, status & UART_MSR_CTS); ++ ++ wake_up_interruptible(&port->info->delta_msr_wait); ++ ++} ++ ++static irqreturn_t it8712_int(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct uart_port *port = dev_id; ++ unsigned int status, pass_counter = 0, data; ++ ++ ++ data = LPC_SERIAL_IRQ_STATUS; ++ if((data&0x10)==0x10) ++ { ++ status = UART_GET_INT_STATUS(port); ++ do { ++// printk("it8712_int: status %x \n", status); ++ switch(status) ++ { ++ case UART_IIR_RDI: ++ case UART_IIR_RLSI: ++ case UART_IIR_RCTO: ++ it8712_rx_chars(port, regs); ++ break; ++ case UART_IIR_THRI: ++ it8712_tx_chars(port); ++ break; ++ case UART_IIR_MSI: ++ it8712_modem_status(port); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(port); ++ } while (status); ++ } ++ ++ status = 0; ++ status |= (IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status; ++ ++ //cnt=0; ++ //do{ ++ // data = LPC_SERIAL_IRQ_STATUS; ++ LPC_SERIAL_IRQ_STATUS = data; ++ // cnt++; ++ //}while(data); ++ //if(cnt>2) ++ // printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt); ++ return IRQ_HANDLED; ++} ++ ++static u_int it8712_tx_empty(struct uart_port *port) ++{ ++// printk("it8712 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int it8712_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("it8712 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void it8712_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("it8712 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SBC; ++ else ++ lcr &= ~UART_LCR_SBC; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (port->uartclk/(16 * baud)) ; ++ ++ return quot; ++} ++static void it8712_set_termios(struct uart_port *port, struct termios *termios, ++ struct termios *old) ++{ ++ unsigned int uart_mc, old_ier, baud, quot; ++ unsigned long flags; ++ ++ termios->c_cflag |= CREAD; ++ termios->c_cflag |= CLOCAL; ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ quot = uart_get_divisor(port, baud); ++ ++ /* byte size and parity */ ++ switch (termios->c_cflag & CSIZE) { ++ case CS5: ++ uart_mc = UART_LCR_WLEN5; ++ break; ++ case CS6: ++ uart_mc = UART_LCR_WLEN6; ++ break; ++ case CS7: ++ uart_mc = UART_LCR_WLEN7; ++ break; ++ default: // CS8 ++ uart_mc = UART_LCR_WLEN8; ++ break; ++ } ++ ++ if (termios->c_cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (termios->c_cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(termios->c_cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ spin_lock_irqsave(&port->lock, flags); ++ /* ++ * Update the per-port timeout ++ */ ++ uart_update_timeout(port, termios->c_cflag, baud); ++ port->read_status_mask = UART_LSR_OE; ++ if (termios->c_iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ old_ier = UART_GET_IER(port); ++ ++ if(UART_ENABLE_MS(port, termios->c_cflag)) ++ old_ier |= UART_IER_MSI; ++ ++ /* Set baud rate */ ++ quot = quot / 13; ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++// UART_PUT_LCR(port, 0x07); // ???? it is wired ++ UART_PUT_MCR(port, 0x08); ++ UART_PUT_FCR(port, 0x01); ++ UART_PUT_IER(port, 0x07); ++ ++ spin_unlock_irqrestore(&port->lock, flags); ++} ++ ++static int it8712_startup(struct uart_port *port) ++{ ++ int retval, i; ++ unsigned int regs; ++ ++ //printk("it8712 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ // regs = 0; ++ // regs |= (IRQ_LPC_MASK); ++ // *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port); ++ if (retval) ++ return retval; ++ ++ //printk("Init LPC int...........\n"); ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK); ++ ++ LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02; ++ LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;// ++ LPC_SERIAL_IRQ_ENABLE = 0x10; ++ ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ for(i=0;i<1000;i++) ; ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ //UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI)); ++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle ++ ++ return 0; ++} ++ ++static void it8712_shutdown(struct uart_port *port) ++{ ++ //printk("it8712 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, port); ++} ++ ++static const char *it8712_type(struct uart_port *port) ++{ ++ return port->type == PORT_IT8712 ? "IT8712" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void it8712_release_port(struct uart_port *port) ++{ ++// printk("it8712 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int it8712_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_it8712") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void it8712_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (it8712_request_port(port) == 0) ++ port->type = PORT_IT8712; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops it8712_pops = { ++ .tx_empty = it8712_tx_empty, ++ .set_mctrl = it8712_set_mctrl_null, ++ .get_mctrl = it8712_get_mctrl, ++ .stop_tx = it8712_stop_tx, ++ .start_tx = it8712_start_tx, ++ .stop_rx = it8712_stop_rx, ++ .enable_ms = it8712_enable_ms, ++ .break_ctl = it8712_break_ctl, ++ .startup = it8712_startup, ++ .shutdown = it8712_shutdown, ++ .set_termios = it8712_set_termios, ++ .type = it8712_type, ++ .release_port = it8712_release_port, ++ .request_port = it8712_request_port, ++ .config_port = it8712_config_port, ++ .verify_port = it8712_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port it8712_ports[UART_NR] = { ++ { ++ membase: (void *)0, ++ mapbase: 0, ++ iotype: SERIAL_IO_MEM, ++ irq: 0, ++ uartclk: UART_CLK/2, ++ fifosize: 16, ++ ops: &it8712_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_IT8712_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int it8712_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("it8712_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void it8712_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = it8712_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ //if(old_ies!=7) ++ //{ ++ // ++ // printk("old_ies = %x\n",old_ies); ++ // old_ies = 7; ++ //} ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_THRE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++ //printk("it8712 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PARITY) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_WLEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_WLEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_WLEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_WLEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = (port->uartclk / (16 *quot)); ++} ++ ++static int __init it8712_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 38400; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ int base;//, irq; ++ int i ; ++ ++ printk("it8712 console setup : \n"); ++ ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ base = IT8712_IO_BASE; ++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ it8712_ports[0].mapbase = base; ++ it8712_ports[0].membase = (void *)IO_ADDRESS(base); ++ it8712_ports[0].irq = IRQ_LPC_OFFSET; ++ // irq = LPCGetConfig(LDN_SERIAL1, 0x70); ++ //it8712_ports[0].irq += irq; ++ ++ //printk("it8712 irq is %x \n", it8712_ports[0].irq); ++ ++ // setup LPC Host 'quiet mode' ++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ; ++ //for(i=0;i<1000;i++) ; // delay ++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ; ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ for(i=0;i<1000;i++) ; ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ it8712_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++extern struct uart_driver it8712_reg; ++static struct console it8712_console = { ++ .name = SERIAL_IT8712_NAME, ++ .write = it8712_console_write, ++ .device = uart_console_device, ++ .setup = it8712_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = 0, ++ .data = &it8712_reg, ++}; ++ ++static int __init it8712_console_init(void) ++{ ++ register_console(&it8712_console); ++ return 0; ++} ++ ++console_initcall(it8712_console_init); ++ ++#define IT8712_CONSOLE &it8712_console ++#else ++#define IT8712_CONSOLE NULL ++#endif ++ ++static struct uart_driver it8712_reg = { ++ .owner = NULL, ++ .driver_name = SERIAL_IT8712_NAME, ++ .dev_name = SERIAL_IT8712_NAME, ++ .major = SERIAL_IT8712_MAJOR, ++ .minor = SERIAL_IT8712_MINOR, ++ .nr = UART_NR, ++ .cons = IT8712_CONSOLE, ++}; ++ ++static int __init it8712_init(void) ++{ ++ int result; ++ //printk("serial_it8712: it871212_init \n"); ++ ++ ++ result = uart_register_driver(&it8712_reg); ++ if(result) ++ return result; ++ result = uart_add_one_port(&it8712_reg, &it8712_ports[0]); ++ ++ return result; ++ ++} ++ ++ ++__initcall(it8712_init); +Index: linux-2.6.23.16/drivers/serial/it8712.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/it8712.h 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,135 @@ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels ++ * XR16C85x only */ ++ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_IER 1 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 1 /* (LCR=BF) Feature Control Register ++ * XR16C85x only */ ++ ++#define UART_IIR 2 /* In: Interrupt ID Register */ ++#define UART_FCR 2 /* Out: FIFO Control Register */ ++#define UART_EFR 2 /* I/O: Extended Features Register */ ++ /* (DLAB=1, 16C660 only) */ ++ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_EMSR 7 /* (LCR=BF) Extended Mode Select Register ++ * FCTR bit 6 selects SCR or EMSR ++ * XR16c85x only */ ++ ++/* ++ * These are the definitions for the FIFO Control Register ++ * (16650 only) ++ */ ++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ ++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ ++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ ++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ ++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ ++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ ++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ ++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ ++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ ++/* 16650 redefinitions */ ++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ ++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ ++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ ++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ ++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ ++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ ++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ ++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ ++/* TI 16750 definitions */ ++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */ ++ ++/* ++ * These are the definitions for the Line Control Register ++ * ++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting ++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. ++ */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_SBC 0x40 /* Set break control */ ++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ ++#define UART_LCR_EPAR 0x10 /* Even parity select */ ++#define UART_LCR_PARITY 0x08 /* Parity Enable */ ++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ ++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ ++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ ++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_LCR_EVEN 0x18 /* Even parity */ ++#define UART_LCR_ODD 0x08 /* Odd parity */ ++#define UART_LCR_MSK 0x03 ++/* ++ * These are the definitions for the Line Status Register ++ */ ++#define UART_LSR_DE 0x80 /* FIFO Data Error */ ++#define UART_LSR_TEMT 0x40 /* Transmitter empty */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_BI 0x10 /* Break interrupt indicator */ ++#define UART_LSR_FE 0x08 /* Frame error indicator */ ++#define UART_LSR_PE 0x04 /* Parity error indicator */ ++#define UART_LSR_OE 0x02 /* Overrun error indicator */ ++#define UART_LSR_DR 0x01 /* Receiver data ready */ ++ ++/* ++ * These are the definitions for the Interrupt Identification Register ++ */ ++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ ++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ ++ ++#define UART_IIR_MSI 0x00 /* Modem status interrupt */ ++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ ++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ ++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ ++#define UART_IIR_RCTO 0x0c /* Receiver character timeout interrupt */ ++/* ++ * These are the definitions for the Interrupt Enable Register ++ */ ++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ ++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ ++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ ++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ ++/* ++ * Sleep mode for ST16650 and TI16750. ++ * Note that for 16650, EFR-bit 4 must be selected as well. ++ */ ++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ ++ ++/* ++ * These are the definitions for the Modem Control Register ++ */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_MCR_OUT2 0x08 /* Out2 complement */ ++#define UART_MCR_OUT1 0x04 /* Out1 complement */ ++#define UART_MCR_RTS 0x02 /* RTS complement */ ++#define UART_MCR_DTR 0x01 /* DTR complement */ ++ ++/* ++ * These are the definitions for the Modem Status Register ++ */ ++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ ++#define UART_MSR_RI 0x40 /* Ring Indicator */ ++#define UART_MSR_DSR 0x20 /* Data Set Ready */ ++#define UART_MSR_CTS 0x10 /* Clear to Send */ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++#define UART_PARITY_NONE 0x00 ++#define UART_PARITY_ODD 0x01 ++#define UART_PARITY_EVEN 0x02 ++ ++ ++ +Index: linux-2.6.23.16/drivers/serial/serial_it8712.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/serial_it8712.c 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,876 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $ ++ * ++ */ ++#include <linux/module.h> ++ ++#include <linux/errno.h> ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/major.h> ++#include <linux/string.h> ++#include <linux/fcntl.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/circ_buf.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++ ++#include <asm/system.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++ ++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <linux/serial_core.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/int_ctrl.h> ++#include <asm/arch/it8712.h> ++#include "serial_it8712.h" ++ ++//#define DEBUG 1 ++#define UART_NR 1 ++ ++#define SERIAL_IT8712_NAME "ttySI" ++#define SERIAL_IT8712_MAJOR 204 ++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define SERIAL_IT8712_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++ ++#define CALLOUT_IT8712_NAME "cuaslI" ++#define CALLOUT_IT8712_MAJOR 205 ++#define CALLOUT_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define CALLOUT_IT8712_NR UART_NR ++#define LPC_HOST_CONTINUE_MODE 0x00000040 ++ ++#define IT8712_NO_PORTS UART_NR ++ ++static struct tty_driver normal, callout; ++static struct tty_struct *it8712_table[UART_NR]; ++static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR]; ++static struct console it8712_console; ++ ++#define IT8712_ISR_PASS_LIMIT 256 ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable ++#define UART_GET_IER(p) inb(((p)->membase+UART_IER)) ++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding ++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer ++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status ++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status ++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control ++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR)) ++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control ++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR)) ++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control ++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM)) ++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM)) ++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL)) ++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL)) ++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++static void it8712_stop_tx(struct uart_port *port, u_int from_tty) ++{ ++ unsigned int reg; ++ ++// printk("it8712 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++} ++ ++static void it8712_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("it8712 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_RDI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("it8712 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MSI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void ++it8712_rx_chars(struct uart_info *info, struct pt_regs *regs) ++{ ++ struct tty_struct *tty = info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ struct uart_port *port = info->port; ++ ++ // printk("it8712_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(info, ch, regs)) ++ goto ignore_char; ++ ++ error_return: ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(info, &it8712_console)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ info->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void it8712_tx_chars(struct uart_info *info) ++{ ++ int count; ++ struct uart_port *port=info->port; ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (info->xmit.head == info->xmit.tail ++ || info->tty->stopped ++ || info->tty->hw_stopped) { ++ it8712_stop_tx(info->port, 0); ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]); ++ info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (info->xmit.head == info->xmit.tail) ++ break; ++ } while (--count > 0); ++ ++ if (CIRC_CNT(info->xmit.head, ++ info->xmit.tail, ++ UART_XMIT_SIZE) < WAKEUP_CHARS) ++ uart_event(info, EVT_WRITE_WAKEUP); ++ ++ if (info->xmit.head == info->xmit.tail) ++ it8712_stop_tx(info->port, 0); ++} ++ ++static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty) ++{ ++ unsigned int reg; ++ struct uart_info *info=(struct uart_info*)(port->iobase); ++ ++// printk("it8712 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++ it8712_tx_chars(info); ++} ++ ++static void it8712_modem_status(struct uart_info *info) ++{ ++ unsigned int status; ++ struct uart_icount *icount = &info->port->icount; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(info->port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DCD) { ++ icount->dcd++; ++#ifdef CONFIG_HARD_PPS ++ if ((info->flags & ASYNC_HARDPPS_CD) && ++ (status & UART_MSR_DCD_MSK)) ++ hardpps(); ++#endif ++ if (info->flags & ASYNC_CHECK_CD) { ++ if (status & UART_MSR_DCD) ++ wake_up_interruptible(&info->open_wait); ++ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (info->flags & ASYNC_CALLOUT_NOHUP))) { ++ if (info->tty) ++ tty_hangup(info->tty); ++ } ++ } ++ } ++ ++ if (status & UART_MSR_DDSR) ++ icount->dsr++; ++ ++ if (status & UART_MSR_DCTS) { ++ icount->cts++; ++ ++ if (info->flags & ASYNC_CTS_FLOW) { ++ status &= UART_MSR_CTS; ++ ++ if (info->tty->hw_stopped) { ++ if (status) { ++ info->tty->hw_stopped = 0; ++ info->ops->start_tx(info->port, 1, 0); ++ uart_event(info, EVT_WRITE_WAKEUP); ++ } ++ } else { ++ if (!status) { ++ info->tty->hw_stopped = 1; ++ info->ops->stop_tx(info->port, 0); ++ } ++ } ++ } ++ } ++ wake_up_interruptible(&info->delta_msr_wait); ++ ++} ++ ++static void it8712_int(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct uart_info *info = dev_id; ++ unsigned int status, pass_counter = 0; ++ ++ status = UART_GET_INT_STATUS(info->port); ++ do { ++// printk("it8712_int: status %x \n", status); ++ switch(status) ++ { ++ case UART_IIR_RDI: ++ case UART_IIR_RLSI: ++ case UART_IIR_RCTO: ++ it8712_rx_chars(info, regs); ++ break; ++ case UART_IIR_THRI: ++ it8712_tx_chars(info); ++ break; ++ case UART_IIR_MSI: ++ it8712_modem_status(info); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(info->port); ++ } while (status); ++} ++ ++static u_int it8712_tx_empty(struct uart_port *port) ++{ ++// printk("it8712 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int it8712_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("it8712 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void it8712_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("it8712 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SBC; ++ else ++ lcr &= ~UART_LCR_SBC; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (info->port->uartclk/(16 * baud)) ; ++ ++ return quot; ++} ++static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot) ++{ ++ u_int uart_mc=0, old_ier; ++ unsigned long flags; ++ ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ ++ ++ /* byte size and parity */ ++ switch (cflag & CSIZE) { ++ case CS5: uart_mc = UART_LCR_WLEN5; break; ++ case CS6: uart_mc = UART_LCR_WLEN6; break; ++ case CS7: uart_mc = UART_LCR_WLEN7; break; ++ default: uart_mc = UART_LCR_WLEN8; break; // CS8 ++ } ++ if (cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ port->read_status_mask = UART_LSR_OE; ++ if (iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ /* first, disable everything */ ++ save_flags(flags); cli(); ++ old_ier = UART_GET_IER(port); ++ ++ if ((port->flags & ASYNC_HARDPPS_CD) || ++ (cflag & CRTSCTS) || !(cflag & CLOCAL)) ++ old_ier |= UART_IER_MSI; ++ ++ /* Set baud rate */ ++ quot = quot / 13; ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++// UART_PUT_LCR(port, 0x07); // ???? it is wired ++ UART_PUT_MCR(port, 0x08); ++ UART_PUT_FCR(port, 0x01); ++ UART_PUT_IER(port, 0x05); ++ ++ restore_flags(flags); ++} ++ ++static int it8712_startup(struct uart_port *port, struct uart_info *info) ++{ ++ int retval; ++ unsigned int regs; ++ ++// printk("it8712 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ port->iobase=(u_int)info; ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info); ++ if (retval) ++ return retval; ++ ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs |= (IRQ_SERIRQ0_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_SERIRQ0_MASK); ++ *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK); ++ ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI)); ++ ++ return 0; ++} ++ ++static void it8712_shutdown(struct uart_port *port, struct uart_info *info) ++{ ++// printk("it8712 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, info); ++} ++ ++static const char *it8712_type(struct uart_port *port) ++{ ++ return port->type == PORT_IT8712 ? "IT8712" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void it8712_release_port(struct uart_port *port) ++{ ++// printk("it8712 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int it8712_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_it8712") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void it8712_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (it8712_request_port(port) == 0) ++ port->type = PORT_IT8712; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops it8712_pops = { ++ tx_empty: it8712_tx_empty, ++ set_mctrl: it8712_set_mctrl_null, ++ get_mctrl: it8712_get_mctrl, ++ stop_tx: it8712_stop_tx, ++ start_tx: it8712_start_tx, ++ stop_rx: it8712_stop_rx, ++ enable_ms: it8712_enable_ms, ++ break_ctl: it8712_break_ctl, ++ startup: it8712_startup, ++ shutdown: it8712_shutdown, ++ change_speed: it8712_change_speed, ++ type: it8712_type, ++ release_port: it8712_release_port, ++ request_port: it8712_request_port, ++ config_port: it8712_config_port, ++ verify_port: it8712_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port it8712_ports[UART_NR] = { ++ { ++ membase: (void *)0, ++ mapbase: 0, ++ iotype: SERIAL_IO_MEM, ++ irq: 0, ++ uartclk: UART_CLK/2, ++ fifosize: 16, ++ ops: &it8712_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_IT8712_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int it8712_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("it8712_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void it8712_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = it8712_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_THRE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++static kdev_t it8712_console_device(struct console *co) ++{ ++ return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index); ++} ++ ++static int it8712_console_wait_key(struct console *co) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = (it8712_ports + co->index); ++ unsigned int status; ++ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_RX_DATA(status)); ++ return UART_GET_CHAR(port); ++#else ++ return 0; ++#endif ++} ++ ++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++ printk("it8712 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PARITY) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_WLEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_WLEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_WLEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_WLEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = (port->uartclk / (16 *quot)); ++} ++ ++static int __init it8712_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 38400; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ int base, irq; ++ int i ; ++ ++// printk("it8712 console setup : \n"); ++ ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ base = IT8712_IO_BASE; ++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ it8712_ports[0].mapbase = base; ++ it8712_ports[0].membase = IO_ADDRESS(base); ++ it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET; ++ irq = LPCGetConfig(LDN_SERIAL1, 0x70); ++ it8712_ports[0].irq += irq; ++ ++ printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq); ++ ++ // setup LPC Host 'quiet mode' ++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ; ++ for(i=0;i<1000;i++) ; // delay ++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ it8712_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++static struct console it8712_console = { ++ name: SERIAL_IT8712_NAME, ++ write: it8712_console_write, ++#ifdef used_and_not_const_char_pointer ++ read: it8712_console_read, ++#endif ++ device: it8712_console_device, ++// wait_key: it8712_console_wait_key, ++ setup: it8712_console_setup, ++ flags: (CON_PRINTBUFFER|CON_ENABLED), ++ index: -1, ++}; ++ ++void __init it8712_console_init(void) ++{ ++ register_console(&it8712_console); ++} ++ ++#define IT8712_CONSOLE &it8712_console ++#else ++#define IT8712_CONSOLE NULL ++#endif ++ ++static struct uart_driver it8712_reg = { ++ owner: NULL, ++ normal_major: SERIAL_IT8712_MAJOR, ++ normal_name: SERIAL_IT8712_NAME, ++ normal_driver: &normal, ++ callout_major: CALLOUT_IT8712_MAJOR, ++ callout_name: CALLOUT_IT8712_NAME, ++ callout_driver: &callout, ++ table: it8712_table, ++ termios: it8712_termios, ++ termios_locked: it8712_termios_locked, ++ minor: SERIAL_IT8712_MINOR, ++ nr: UART_NR, ++#ifdef CONFIG_ARCH_SL2312 ++ port: it8712_ports, ++#endif ++ state: NULL, ++ cons: IT8712_CONSOLE, ++}; ++ ++static int __init it8712_init(void) ++{ ++// printk("serial_it8712: it871212_init \n"); ++ ++ return uart_register_driver(&it8712_reg); ++} ++ ++ ++__initcall(it8712_init); +Index: linux-2.6.23.16/drivers/serial/serial_sl2312.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/serial_sl2312.c 2008-03-17 12:30:50.290536619 +0200 +@@ -0,0 +1,827 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $ ++ * ++ */ ++#include <linux/module.h> ++ ++#include <linux/errno.h> ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/major.h> ++#include <linux/string.h> ++#include <linux/fcntl.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/circ_buf.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <linux/serial_core.h> ++ ++#include <asm/system.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++#include <linux/spinlock.h> ++#include <linux/irq.h> ++ ++ ++#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <asm/arch/sl2312.h> ++#define UART_TYPE (volatile unsigned int*) ++#include <asm/arch/uart.h> ++#include <asm/arch/int_ctrl.h> ++ ++// #define DEBUG 1 ++#define UART_NR 1 ++ ++ ++#define SERIAL_SL2312_NAME "ttySL" ++#define SERIAL_SL2312_MAJOR 204 ++#define SERIAL_SL2312_MINOR 40 /* Temporary - will change in future */ ++#define SERIAL_SL2312_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++ ++#define SL2312_NO_PORTS UART_NR ++#define SL2312_ISR_PASS_LIMIT 256 ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inl(UART_IIR((p)->membase)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outl(c,UART_IER((p)->membase)) // interrupt enable ++#define UART_GET_IER(p) inl(UART_IER((p)->membase)) ++#define UART_PUT_CHAR(p, c) outl(c,UART_THR((p)->membase)) // transmitter holding ++#define UART_GET_CHAR(p) inl(UART_RBR((p)->membase)) // receive buffer ++#define UART_GET_LSR(p) inl(UART_LSR((p)->membase)) // line status ++#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) // modem status ++#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) // modem control ++#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase)) ++#define UART_GET_LCR(p) inl(UART_LCR((p)->membase)) // mode control ++#define UART_PUT_LCR(p, c) outl(c,UART_LCR((p)->membase)) ++#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase)) ++#define UART_PUT_DIV_HI(p, c) outl(c,UART_DIV_HI((p)->membase)) ++#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase)) ++#define UART_PUT_DIV_LO(p, c) outl(c,UART_DIV_LO((p)->membase)) ++#define UART_PUT_MDR(p, c) outl(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++ ++static void sl2312_stop_tx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_TE); ++ UART_PUT_IER(port, reg); ++} ++ ++static void sl2312_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_DR); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void sl2312_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MS); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void ++sl2312_rx_chars(struct uart_port *port) ++{ ++ struct tty_struct *tty = port->info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ ++ ++ // printk("sl2312_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ //if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ if (tty && !tty_buffer_request_room(tty, 1)) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(port, ch)) ++ goto ignore_char; ++ ++ error_return: ++ //*tty->flip.flag_buf_ptr++ = flg; ++ //*tty->flip.char_buf_ptr++ = ch; ++ //tty->flip.count++; ++ tty_insert_flip_char(tty, ch, flg); ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(port)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ //*tty->flip.flag_buf_ptr++ = flg; ++ //*tty->flip.char_buf_ptr++ = ch; ++ //tty->flip.count++; ++ ++ tty_insert_flip_char(tty, 0, TTY_BREAK); ++ ++ // if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ if (tty_buffer_request_room(tty, 1)) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ port->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void sl2312_tx_chars(struct uart_port *port) ++{ ++ struct circ_buf *xmit = &port->info->xmit; ++ int count; ++ ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { ++ sl2312_stop_tx(port); ++ ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (uart_circ_empty(xmit)) ++ break; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++ ++ if (uart_circ_empty(xmit)) ++ sl2312_stop_tx(port); ++ ++} ++ ++static void sl2312_start_tx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_TE); ++ UART_PUT_IER(port, reg); ++ ++ sl2312_tx_chars(port); ++} ++ ++static void sl2312_modem_status(struct uart_port *port) ++{ ++ unsigned int status; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DDCD) ++ uart_handle_dcd_change(port, status & UART_MSR_DCD); ++ ++ if (status & UART_MSR_DDSR) ++ port->icount.dsr++; ++ ++ if (status & UART_MSR_DCTS) ++ uart_handle_cts_change(port, status & UART_MSR_CTS); ++ ++ wake_up_interruptible(&port->info->delta_msr_wait); ++ ++} ++ ++static irqreturn_t sl2312_int(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ unsigned int status, pass_counter = 0; ++ ++ status = UART_GET_INT_STATUS(port); ++ do { ++ switch(status) ++ { ++ case UART_IIR_DR: ++ case UART_IIR_RLS: ++ sl2312_rx_chars(port); ++ break; ++ case UART_IIR_TE: ++ sl2312_tx_chars(port); ++ break; ++ case UART_IIR_MODEM: ++ sl2312_modem_status(port); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > SL2312_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(port); ++ } while (status); ++ ++ return IRQ_HANDLED; ++} ++ ++static u_int sl2312_tx_empty(struct uart_port *port) ++{ ++// printk("sl2312 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int sl2312_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("sl2312 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void sl2312_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("sl2312 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SETBREAK; ++ else ++ lcr &= ~UART_LCR_SETBREAK; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (port->uartclk / (16 * baud)-1) ; ++ ++ return quot; ++} ++ ++static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios, ++ struct ktermios *old) ++{ ++ unsigned int uart_mc, old_ier, baud, quot; ++ unsigned long flags; ++ ++ termios->c_cflag |= CREAD; ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ quot = (port->uartclk / (16 * baud)) ; ++ //uart_get_divisor(port, baud); ++ ++ /* byte size and parity */ ++ switch (termios->c_cflag & CSIZE) { ++ case CS5: ++ uart_mc = UART_LCR_LEN5; ++ break; ++ case CS6: ++ uart_mc = UART_LCR_LEN6; ++ break; ++ case CS7: ++ uart_mc = UART_LCR_LEN7; ++ break; ++ default: // CS8 ++ uart_mc = UART_LCR_LEN8; ++ break; ++ } ++ ++ if (termios->c_cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (termios->c_cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(termios->c_cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ spin_lock_irqsave(&port->lock, flags); ++ /* ++ * Update the per-port timeout ++ */ ++ uart_update_timeout(port, termios->c_cflag, baud); ++ port->read_status_mask = UART_LSR_OE; ++ if (termios->c_iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ //save_flags(flags); cli(); ++ old_ier = UART_GET_IER(port); ++ ++ if(UART_ENABLE_MS(port, termios->c_cflag)) ++ old_ier |= UART_IER_MS; ++ ++ /* Set baud rate */ ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++ UART_PUT_IER(port, old_ier); ++ ++ //restore_flags(flags); ++ spin_unlock_irqrestore(&port->lock, flags); ++} ++ ++ ++ ++static int sl2312_startup(struct uart_port *port) ++{ ++ int retval; ++ unsigned int regs; ++ ++// printk("sl2312 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port); ++ if (retval) ++ return retval; ++ ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_UART_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_UART_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK); ++ ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE)); ++ ++ return 0; ++} ++ ++static void sl2312_shutdown(struct uart_port *port) ++{ ++// printk("sl2312 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, port); ++} ++ ++static const char *sl2312_type(struct uart_port *port) ++{ ++ return port->type == PORT_SL2312 ? "SL2312" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void sl2312_release_port(struct uart_port *port) ++{ ++// printk("sl2312 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int sl2312_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_sl2312") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void sl2312_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (sl2312_request_port(port) == 0) ++ port->type = PORT_SL2312; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops sl2312_pops = { ++ .tx_empty =sl2312_tx_empty, ++ .set_mctrl =sl2312_set_mctrl_null, ++ .get_mctrl =sl2312_get_mctrl, ++ .stop_tx =sl2312_stop_tx, ++ .start_tx =sl2312_start_tx, ++ .stop_rx =sl2312_stop_rx, ++ .enable_ms =sl2312_enable_ms, ++ .break_ctl =sl2312_break_ctl, ++ .startup =sl2312_startup, ++ .shutdown =sl2312_shutdown, ++ .set_termios =sl2312_set_termios, ++ .type =sl2312_type, ++ .release_port =sl2312_release_port, ++ .request_port =sl2312_request_port, ++ .config_port =sl2312_config_port, ++ .verify_port =sl2312_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port sl2312_ports[UART_NR] = { ++ { ++ membase: (void *)IO_ADDRESS(SL2312_UART_BASE), ++ mapbase: SL2312_UART_BASE, ++ iotype: SERIAL_IO_MEM, ++ irq: IRQ_UART, ++ uartclk: UART_CLK, ++ fifosize: 16, ++ ops: &sl2312_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_SL2312_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int sl2312_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("sl2312_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void sl2312_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = sl2312_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_TE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++#if 0 ++static void sl2312_console_device(struct console *co,int *index) ++{ ++ ++ struct uart_driver *p = co->data; ++ *index = co->index; ++ return p->tty_driver; ++ ++} ++#endif ++ ++static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++// printk("sl2312 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PE) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_LEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_LEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_LEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_LEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = port->uartclk / (16 *quot ); ++} ++ ++static int __init sl2312_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 19200; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ ++ printk("sl2312 console setup : \n"); ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ sl2312_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++extern struct uart_driver sl2312_reg; ++static struct console sl2312_console = { ++ .name = SERIAL_SL2312_NAME, ++ .write = sl2312_console_write, ++ .device = uart_console_device, ++// .device = sl2312_console_device, ++ .setup = sl2312_console_setup, ++// .flags = (CON_PRINTBUFFER|CON_ENABLED), ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &sl2312_reg, ++}; ++ ++static int __init sl2312_console_init(void) ++{ ++ register_console(&sl2312_console); ++ return 0; ++ ++} ++ ++console_initcall(sl2312_console_init); ++ ++#define SL2312_CONSOLE &sl2312_console ++#else ++#define SL2312_CONSOLE NULL ++#endif ++ ++// static ++struct uart_driver sl2312_reg = { ++ .owner = NULL, ++ .driver_name = SERIAL_SL2312_NAME, ++ .dev_name = SERIAL_SL2312_NAME, ++ .major = SERIAL_SL2312_MAJOR, ++ .minor = SERIAL_SL2312_MINOR, ++ .nr = UART_NR, ++ .cons = SL2312_CONSOLE, ++}; ++ ++static int __init sl2312_init(void) ++{ ++ int result; ++ //printk("serial_it8712: it871212_init \n"); ++ ++ result = uart_register_driver(&sl2312_reg); ++ if(result) ++ return result; ++ result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]); ++ ++ return result; ++} ++ ++ ++__initcall(sl2312_init); +Index: linux-2.6.23.16/include/linux/serial_core.h +=================================================================== +--- linux-2.6.23.16.orig/include/linux/serial_core.h 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/include/linux/serial_core.h 2008-03-15 17:59:53.568330991 +0200 +@@ -147,6 +147,10 @@ + #define PORT_SB1250_DUART 77 + + ++/* Storlink Soc */ ++#define PORT_SL2312 72 ++#define PORT_IT8712 73 ++ + #ifdef __KERNEL__ + + #include <linux/compiler.h> +Index: linux-2.6.23.16/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-17 12:19:43.252524398 +0200 +@@ -70,6 +70,16 @@ + obj-$(CONFIG_APPLICOM) += applicom.o + obj-$(CONFIG_SONYPI) += sonypi.o + obj-$(CONFIG_RTC) += rtc.o ++ ++### for Storlink SoC ### ++obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o ++obj-$(CONFIG_IT8712_GPIO) += it8712_gpio.o ++obj-$(CONFIG_GEMINI_GPIO) += gemini_gpio.o ++obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o ++obj-$(CONFIG_GEMINI_CIR) += gemini_cir.o ++obj-$(CONFIG_GEMINI_I2S) += gemini_i2s.o ++obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o ++ + obj-$(CONFIG_HPET) += hpet.o + obj-$(CONFIG_GEN_RTC) += genrtc.o + obj-$(CONFIG_EFI_RTC) += efirtc.o +Index: linux-2.6.23.16/drivers/serial/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/serial/Kconfig 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/serial/Kconfig 2008-03-15 17:59:53.568330991 +0200 +@@ -280,6 +280,56 @@ + + comment "Non-8250 serial port support" + ++config SERIAL_SL2312 ++ bool "SL2312 serial port (sl2312) support" ++ depends on ARCH_SL2312 ++ select SERIAL_CORE ++ select SERIAL_SL2312_CONSOLE ++ help ++ Say Y here if you want to use the hard logic uart on SWORD. This ++ driver also supports soft logic implentations of this uart core. ++ ++config SERIAL_SL2312_CONSOLE ++ bool "Support for console on SL2312 serial port" ++ depends on SERIAL_SL2312 ++ select SERIAL_CORE_CONSOLE ++ help ++ Say Y here if you want to support a serial console on an SWORD ++ hard logic uart or uart00 IP core. ++ ++ Even if you say Y here, the currently visible virtual console ++ (/dev/tty0) will still be used as the system console by default, but ++ you can alter that using a kernel command line option such as ++ "console=ttySL0". (Try "man bootparam" or see the documentation of ++ your boot loader (lilo or loadlin) about how to pass options to the ++ kernel at boot time.) ++ ++ ++config SERIAL_IT8712 ++ bool "Sl2312 serial port(IT8712) support" ++ depends on ARM && ARCH_SL2312 && SL2312_LPC ++ select SERIAL_CORE ++ select SERIAL_IT8712_CONSOLE ++ help ++ Say Y here if you want to use the hard logic uart on Excalibur. This ++ driver also supports soft logic implentations of this uart core. ++ ++config SERIAL_IT8712_CONSOLE ++ bool "Support for console on Sword serial port(IT8712)" ++ depends on SERIAL_IT8712 ++ select SERIAL_CORE_CONSOLE ++ help ++ Say Y here if you want to support a serial console on an Excalibur ++ hard logic uart or uart00 IP core. ++ ++ Even if you say Y here, the currently visible virtual console ++ (/dev/tty0) will still be used as the system console by default, but ++ you can alter that using a kernel command line option such as ++ "console=ttySI0". (Try "man bootparam" or see the documentation of ++ your boot loader (lilo or loadlin) about how to pass options to the ++ kernel at boot time.) ++ ++ + config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) +Index: linux-2.6.23.16/drivers/serial/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/serial/Makefile 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/serial/Makefile 2008-03-15 17:59:53.568330991 +0200 +@@ -62,5 +62,7 @@ + obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o + obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o + obj-$(CONFIG_SERIAL_NETX) += netx-serial.o ++obj-$(CONFIG_SERIAL_IT8712) += it8712.o ++obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o + obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o + obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o |