diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.26/1192-introduce-resume-exception-capture.patch.patch')
-rwxr-xr-x | target/linux/s3c24xx/patches-2.6.26/1192-introduce-resume-exception-capture.patch.patch | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.26/1192-introduce-resume-exception-capture.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1192-introduce-resume-exception-capture.patch.patch deleted file mode 100755 index 6f9b54de3..000000000 --- a/target/linux/s3c24xx/patches-2.6.26/1192-introduce-resume-exception-capture.patch.patch +++ /dev/null @@ -1,267 +0,0 @@ -From 081a639e9274072fbd34ee778188332ed972734e Mon Sep 17 00:00:00 2001 -From: Andy Green <andy@openmoko.com> -Date: Fri, 25 Jul 2008 23:06:16 +0100 -Subject: [PATCH] introduce-resume-exception-capture.patch - -This patch introduces a new resume debugging concept: if we -get an OOPS inbetween starting suspend and finishing resume, it -uses a new "emergency spew" device similar to BUT NOT REQUIRING -CONFIG_DEBUG_LL to dump the syslog buffer and then the OOPS -on the debug device defined by the existing CONFIG_DEBUG_S3C_UART -index. But neither CONFIG_DEBUG_LL nor the S3C low level configs -are needed to use this feature. - -Another difference between this feature and CONFIG_DEBUG_LL is that -it does not affect resume timing, ordering or UART traffic UNLESS -there is an OOPS during resume. - -The patch adds three global exports, one to say if we are inside -suspend / resume, and two callbacks for printk() to use to init -and dump the emergency data. The callbacks are set in s3c serial -device init, but the whole structure is arch independent. - -Signed-off-by: Andy Green <andy@openmoko.com> ---- - drivers/serial/s3c2410.c | 77 +++++++++++++++++++++++++++++++++++++++++++++- - include/linux/kernel.h | 2 + - include/linux/suspend.h | 6 +++ - kernel/power/main.c | 7 ++++ - kernel/printk.c | 42 +++++++++++++++++++++++++ - 5 files changed, 133 insertions(+), 1 deletions(-) - -diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c -index 32cceae..f20f63b 100644 ---- a/drivers/serial/s3c2410.c -+++ b/drivers/serial/s3c2410.c -@@ -81,6 +81,7 @@ - - #include <asm/plat-s3c/regs-serial.h> - #include <asm/arch/regs-gpio.h> -+#include <asm/arch/regs-clock.h> - - /* structures */ - -@@ -1170,7 +1171,13 @@ static int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) - { - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); -- return platform_driver_register(drv); -+ /* set up the emergency debug UART functions */ -+ -+ printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up; -+ printk_emergency_debug_spew_send_string = s3c2410_printascii; -+ -+ dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); -+ return platform_driver_register(drv); - } - - -@@ -1647,6 +1654,74 @@ static struct platform_driver s3c2412_serial_drv = { - }, - }; - -+static void s3c24xx_serial_force_debug_port_up(void) -+{ -+ struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[ -+ CONFIG_DEBUG_S3C_UART]; -+ struct s3c24xx_uart_clksrc *clksrc = NULL; -+ struct clk *clk = NULL; -+ unsigned long tmp; -+ -+ s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200); -+ -+ tmp = __raw_readl(S3C2410_CLKCON); -+ -+ /* re-start uart clocks */ -+ tmp |= S3C2410_CLKCON_UART0; -+ tmp |= S3C2410_CLKCON_UART1; -+ tmp |= S3C2410_CLKCON_UART2; -+ -+ __raw_writel(tmp, S3C2410_CLKCON); -+ udelay(10); -+ -+ s3c24xx_serial_setsource(&ourport->port, clksrc); -+ -+ if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { -+ clk_disable(ourport->baudclk); -+ ourport->baudclk = NULL; -+ } -+ -+ clk_enable(clk); -+ -+ ourport->clksrc = clksrc; -+ ourport->baudclk = clk; -+} -+ -+static void s3c2410_printascii(const char *sz) -+{ -+ struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[ -+ CONFIG_DEBUG_S3C_UART]; -+ struct uart_port *port = &ourport->port; -+ -+ /* 8 N 1 */ -+ wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3); -+ /* polling mode */ -+ wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5); -+ /* disable FIFO */ -+ wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01)); -+ /* fix baud rate */ -+ wr_regl(port, S3C2410_UBRDIV, 26); -+ -+ while (*sz) { -+ int timeout = 10000000; -+ -+ /* spin on it being busy */ -+ while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--) -+ ; -+ -+ /* transmit register */ -+ wr_regl(port, S3C2410_UTXH, *sz); -+ -+ sz++; -+ } -+} -+ -+ -+/* s3c24xx_serial_resetport -+ * -+ * wrapper to call the specific reset for this port (reset the fifos -+ * and the settings) -+*/ - - static inline int s3c2412_serial_init(void) - { -diff --git a/include/linux/kernel.h b/include/linux/kernel.h -index 2e70006..fcad89e 100644 ---- a/include/linux/kernel.h -+++ b/include/linux/kernel.h -@@ -198,6 +198,8 @@ extern int __ratelimit(int ratelimit_jiffies, int ratelimit_burst); - extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst); - extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, - unsigned int interval_msec); -+extern void (*printk_emergency_debug_spew_init)(void); -+extern void (*printk_emergency_debug_spew_send_string)(const char *); - #else - static inline int vprintk(const char *s, va_list args) - __attribute__ ((format (printf, 1, 0))); -diff --git a/include/linux/suspend.h b/include/linux/suspend.h -index a697742..8164615 100644 ---- a/include/linux/suspend.h -+++ b/include/linux/suspend.h -@@ -140,6 +140,12 @@ struct pbe { - struct pbe *next; - }; - -+/** -+ * global indication we are somewhere between start of suspend and end of -+ * resume, nonzero is true -+ */ -+extern int global_inside_suspend; -+ - /* mm/page_alloc.c */ - extern void mark_free_pages(struct zone *zone); - -diff --git a/kernel/power/main.c b/kernel/power/main.c -index 6a6d5eb..1169648 100644 ---- a/kernel/power/main.c -+++ b/kernel/power/main.c -@@ -130,6 +130,9 @@ static inline int suspend_test(int level) { return 0; } - - #endif /* CONFIG_PM_SLEEP */ - -+int global_inside_suspend; -+EXPORT_SYMBOL(global_inside_suspend); -+ - #ifdef CONFIG_SUSPEND - - /* This is just an arbitrary number */ -@@ -258,6 +261,8 @@ int suspend_devices_and_enter(suspend_state_t state) - if (!suspend_ops) - return -ENOSYS; - -+ global_inside_suspend = 1; -+ - if (suspend_ops->begin) { - error = suspend_ops->begin(state); - if (error) -@@ -297,6 +302,8 @@ int suspend_devices_and_enter(suspend_state_t state) - Close: - if (suspend_ops->end) - suspend_ops->end(); -+ global_inside_suspend = 0; -+ - return error; - } - -diff --git a/kernel/printk.c b/kernel/printk.c -index e2129e8..00df30e 100644 ---- a/kernel/printk.c -+++ b/kernel/printk.c -@@ -32,8 +32,12 @@ - #include <linux/security.h> - #include <linux/bootmem.h> - #include <linux/syscalls.h> -+#include <linux/jiffies.h> -+#include <linux/suspend.h> - - #include <asm/uaccess.h> -+#include <asm/plat-s3c24xx/neo1973.h> -+#include <asm/arch/gta02.h> - - /* - * Architectures can override it: -@@ -67,6 +71,12 @@ int console_printk[4] = { - int oops_in_progress; - EXPORT_SYMBOL(oops_in_progress); - -+void (*printk_emergency_debug_spew_init)(void) = NULL; -+EXPORT_SYMBOL(printk_emergency_debug_spew_init); -+ -+void (*printk_emergency_debug_spew_send_string)(const char *) = NULL; -+EXPORT_SYMBOL(printk_emergency_debug_spew_send_string); -+ - /* - * console_sem protects the console_drivers list, and also - * provides serialisation for access to the entire console -@@ -718,6 +728,38 @@ asmlinkage int vprintk(const char *fmt, va_list args) - printed_len += vscnprintf(printk_buf + printed_len, - sizeof(printk_buf) - printed_len, fmt, args); - -+ /* if you're debugging resume, the normal methods can change resume -+ * ordering behaviours because their debugging output is synchronous -+ * (ie, CONFIG_DEBUG_LL). If your problem is an OOPS, this code -+ * will not affect the speed and duration and ordering of resume -+ * actions, but will give you a chance to read the full undumped -+ * syslog AND the OOPS data when it happens -+ * -+ * if you support it, your debug device init can override the exported -+ * emergency_debug_spew_init and emergency_debug_spew_send_string to -+ * usually force polling or bitbanging on your debug console device -+ */ -+ if (oops_in_progress && global_inside_suspend && -+ printk_emergency_debug_spew_init && -+ printk_emergency_debug_spew_send_string) { -+ unsigned long cur_index; -+ char ch[2]; -+ -+ if (global_inside_suspend == 1) { -+ (printk_emergency_debug_spew_init)(); -+ -+ ch[1] = '\0'; -+ cur_index = con_start; -+ while (cur_index != log_end) { -+ ch[0] = LOG_BUF(cur_index); -+ (printk_emergency_debug_spew_send_string)(ch); -+ cur_index++; -+ } -+ global_inside_suspend++; /* only once */ -+ } -+ (printk_emergency_debug_spew_send_string)(printk_buf); -+ } -+ - /* - * Copy the output into log_buf. If the caller didn't provide - * appropriate log level tags, we insert them here --- -1.5.6.3 - |