diff options
Diffstat (limited to 'target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S')
| -rw-r--r-- | target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S b/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S deleted file mode 100644 index 80048359f..000000000 --- a/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S +++ /dev/null @@ -1,296 +0,0 @@ -#include <asm/asm-offsets.h> -#include <asm-generic/vmlinux.lds.h> - -#undef mips -#define mips mips -OUTPUT_ARCH(mips) -ENTRY(kernel_entry) -PHDRS { - text PT_LOAD FLAGS(7); /* RWX */ - note PT_NOTE FLAGS(4); /* R__ */ -} -jiffies = JIFFIES; - -SECTIONS -{ - . = LOADADDR; - /* read-only */ - _text = .; /* Text and read-only data */ - .text : { - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.text.*) - *(.fixup) - *(.gnu.warning) -/*#ifdef CONFIG_RTL8192SE*/ -#if 1 - /* start of wlan f/w definition */ - __fw_start = . ; - *(.rtl8192sfw.bin) - __fw_end = . ; - - __AGC_TAB_start = . ; - *(.AGC_TAB.txt) - __AGC_TAB_end = . ; - - __phy_reg_start = . ; - *(.phy_reg.txt) - __phy_reg_end = . ; - - __phy_reg_MP_start = . ; - *(.phy_reg_MP.txt) - __phy_reg_MP_end = . ; - - __MACPHY_REG_start = . ; - *(.MACPHY_REG.txt) - __MACPHY_REG_end = . ; - - __radio_a_start = . ; - *(.radio_a.txt) - __radio_a_end = . ; - - __radio_b_start = . ; - *(.radio_b.txt) - __radio_b_end = . ; - - __PHY_REG_PG_start = .; - *(.PHY_REG_PG.txt) - __PHY_REG_PG_end = .; - - __PHY_to1T2R_start = .; - *(.PHY_to1T2R.txt) - __PHY_to1T2R_end = .; - - __PHY_to1T2R_b_start = .; - *(.PHY_to1T2R_b.txt) - __PHY_to1T2R_b_end = .; - - __PHY_to1T1R_start = .; - *(.PHY_to1T1R.txt) - __PHY_to1T1R_end = .; - - __PHY_to1T1R_b_start = .; - *(.PHY_to1T1R_b.txt) - __PHY_to1T1R_b_end = .; - - __radio_a_hp_start = . ; - *(.radio_a_hp.txt) - __radio_a_hp_end = . ; - - /* end of wlan f/w definition */ -#endif - - } :text = 0 - _etext = .; /* End of text section */ - - /* Exception table */ - . = ALIGN(16); - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - - /* Exception table for data bus errors */ - __dbe_table : { - __start___dbe_table = .; - *(__dbe_table) - __stop___dbe_table = .; - } - - . = ALIGN(16384); - __iram = . ; - .iram : - { - *(.iram-gen) /* general usage (essential) */ - *(.iram-fwd) /* general packet forwarding used */ - *(.iram-rtkwlan) /* realtek wlan driver */ - *(.iram-l2-fwd) /* L2 packet forwarding */ - *(.iram-l34-fwd) /* L34 packet forwarding */ - *(.iram-tx) /* protocol stack TX */ - *(.iram-extdev) /* ROMEDRV extension device fwd */ - *(.iram-crypto) /* authetication / crypto-engine */ - *(.iram-voip) /* voip */ - *(.iram) /* other usage */ - *(.iram.1) - } - - . = ALIGN(8192); - __dram = . ; - __dram_start = . ; - .dram : - { - *(.dram-wapi) /*wapi encryption/decryption used*/ - *(.dram-gen) /* general usage (essential) */ - *(.dram-fwd) /* general packet forwarding used */ - *(.dram-l2-fwd) /* L2 packet forwarding */ - *(.dram-l34-fwd) /* L34 packet forwarding */ - *(.dram-extdev) /* ROMEDRV extension device fwd */ - *(.dram-rtkwlan) /* realtek wlan driver */ - *(.dram-crypto) /* authetication / crypto-engine */ - *(.dram-voip) /* voip */ - *(.dram-tx) /* protocol stack TX */ - *(.dram) /* other usage */ - *(.dram.1) - } - . = ALIGN(8192); - __dram_end = . ; - - NOTES :text :note - .dummy : { *(.dummy) } :text - - RODATA - - /* writeable */ - .data : { /* Data */ - . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ - /* - * This ALIGN is needed as a workaround for a bug a - * gcc bug upto 4.1 which limits the maximum alignment - * to at most 32kB and results in the following - * warning: - * - * CC arch/mips/kernel/init_task.o - * arch/mips/kernel/init_task.c:30: warning: alignment - * of ‘init_thread_union�is greater than maximum - * object file alignment. Using 32768 - */ - . = ALIGN(_PAGE_SIZE); - *(.data.init_task) - - DATA_DATA - CONSTRUCTORS - } - _gp = . + 0x8000; - .lit8 : { - *(.lit8) - } - .lit4 : { - *(.lit4) - } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { - *(.sdata) - } - - . = ALIGN(_PAGE_SIZE); - .data_nosave : { - __nosave_begin = .; - *(.data.nosave) - } - . = ALIGN(_PAGE_SIZE); - __nosave_end = .; - - . = ALIGN(1 << 5); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } - _edata = .; /* End of data section */ - - /* will be freed after init */ - . = ALIGN(_PAGE_SIZE); /* Init code and data */ - __init_begin = .; - .init.text : { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : { - INIT_DATA - } - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - SECURITY_INIT - - /* .exit.text is discarded at runtime, not link time, to deal with - * references from .rodata - */ - .exit.text : { - EXIT_TEXT - } - .exit.data : { - EXIT_DATA - } -#if defined(CONFIG_BLK_DEV_INITRD) - . = ALIGN(_PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - PERCPU(_PAGE_SIZE) - . = ALIGN(_PAGE_SIZE); - __init_end = .; - /* freed after init ends here */ - - __bss_start = .; /* BSS */ - .sbss : { - *(.sbss) - *(.scommon) - } - .bss : { - *(.bss) - *(COMMON) - } - __bss_stop = .; - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - - /* ABI crap starts here */ - *(.MIPS.options) - *(.options) - *(.pdr) - *(.reginfo) - } - - /* These mark the ABI of the kernel for debuggers. */ - .mdebug.abi32 : { - KEEP(*(.mdebug.abi32)) - } - .mdebug.abi64 : { - KEEP(*(.mdebug.abi64)) - } - - /* This is the MIPS specific mdebug section. */ - .mdebug : { - *(.mdebug) - } - - STABS_DEBUG - DWARF_DEBUG - - /* These must appear regardless of . */ - .gptab.sdata : { - *(.gptab.data) - *(.gptab.sdata) - } - .gptab.sbss : { - *(.gptab.bss) - *(.gptab.sbss) - } -} |