summaryrefslogtreecommitdiffstats
path: root/target/linux/rdc/patches-2.6.27
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/rdc/patches-2.6.27')
-rw-r--r--target/linux/rdc/patches-2.6.27/001-rdc3210_flash_map.patch63
-rw-r--r--target/linux/rdc/patches-2.6.27/002-cmdline_setup.patch10
-rw-r--r--target/linux/rdc/patches-2.6.27/003-rootfstype.patch11
-rw-r--r--target/linux/rdc/patches-2.6.27/004-yenta_mystery.patch20
-rw-r--r--target/linux/rdc/patches-2.6.27/005-fix_amit_breakage.patch42
-rw-r--r--target/linux/rdc/patches-2.6.27/006-bzip2_lzma_x86.patch3139
6 files changed, 0 insertions, 3285 deletions
diff --git a/target/linux/rdc/patches-2.6.27/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.27/001-rdc3210_flash_map.patch
deleted file mode 100644
index 4c12471ec..000000000
--- a/target/linux/rdc/patches-2.6.27/001-rdc3210_flash_map.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -110,6 +110,50 @@
- Sun Microsystems boardsets. This driver will require CFI support
- in the kernel, so if you did not enable CFI previously, do that now.
-
-+config MTD_RDC3210
-+ tristate "CFI Flash device mapped on RDC3210"
-+ depends on X86 && MTD_CFI && MTD_PARTITIONS
-+ help
-+ RDC-3210 is the flash device we find on Ralink reference board.
-+
-+config MTD_RDC3210_STATIC_MAP
-+ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
-+ select MTD_RDC3210_FACTORY_PRESENT
-+ help
-+ The mapping driver will use the static partition map for the
-+ RDC-3210 flash device.
-+
-+config MTD_RDC3210_FACTORY_PRESENT
-+ bool "Reserve a partition on RDC3210 for factory presets"
-+ depends on MTD_RDC3210
-+ default y
-+ help
-+ The mapping driver will reserve a partition on the RDC-3210 flash
-+ device for resetting flash contents to factory defaults.
-+
-+config MTD_RDC3210_ALLOW_JFFS2
-+ bool "JFFS2 filesystem usable in a partition on RDC3210"
-+ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
-+ help
-+ The mapping driver will align a partition on the RDC-3210 flash
-+ device to an erase-block boundary so that a JFFS2 filesystem may
-+ reside on it.
-+
-+config MTD_RDC3210_SIZE
-+ hex "Amount of flash memory on RDC3210"
-+ depends on MTD_RDC3210
-+ default "0x400000"
-+ help
-+ Total size in bytes of the RDC-3210 flash device
-+
-+config MTD_RDC3210_BUSWIDTH
-+ int "Width of CFI Flash device mapped on RDC3210"
-+ depends on MTD_RDC3210
-+ default "2"
-+ help
-+ Number of bytes addressed on the RDC-3210 flash device before
-+ addressing the same chip again
-+
- config MTD_SC520CDP
- tristate "CFI Flash device mapped on AMD SC520 CDP"
- depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -29,6 +29,7 @@
- obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
- obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
- obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
-+obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
- obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
diff --git a/target/linux/rdc/patches-2.6.27/002-cmdline_setup.patch b/target/linux/rdc/patches-2.6.27/002-cmdline_setup.patch
deleted file mode 100644
index ee36576d2..000000000
--- a/target/linux/rdc/patches-2.6.27/002-cmdline_setup.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/x86/kernel/setup.c 2009-04-24 11:37:41.000000000 +0200
-+++ b/arch/x86/kernel/setup.c 2009-04-24 11:38:43.000000000 +0200
-@@ -701,6 +701,7 @@
- bss_resource.start = virt_to_phys(&__bss_start);
- bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-+ strcat(boot_command_line, " init=/etc/preinit console=ttyS0,38400");
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
diff --git a/target/linux/rdc/patches-2.6.27/003-rootfstype.patch b/target/linux/rdc/patches-2.6.27/003-rootfstype.patch
deleted file mode 100644
index 55a4cd49f..000000000
--- a/target/linux/rdc/patches-2.6.27/003-rootfstype.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -163,6 +163,8 @@
- {
- char *s = page;
-
-+ if (!root_fs_names)
-+ root_fs_names = "squashfs,jffs2";
- if (root_fs_names) {
- strcpy(page, root_fs_names);
- while (*s++) {
diff --git a/target/linux/rdc/patches-2.6.27/004-yenta_mystery.patch b/target/linux/rdc/patches-2.6.27/004-yenta_mystery.patch
deleted file mode 100644
index 7faabdf7a..000000000
--- a/target/linux/rdc/patches-2.6.27/004-yenta_mystery.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- linux-2.6.24.7.orig/drivers/pcmcia/yenta_socket.c 2008-10-26 08:30:07.000000000 -0700
-+++ linux-2.6.24.7/drivers/pcmcia/yenta_socket.c 2008-10-26 08:54:27.000000000 -0700
-@@ -1171,6 +1171,17 @@
-
- /* We must finish initialization here */
-
-+#ifdef CONFIG_X86_RDC
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
-+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
-+
-+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
-+ config_writel(socket, 35*4, 0x00000022);
-+ config_writel(socket, 36*4, 0x60200000);
-+ config_writel(socket, 40*4, 0x7e020000);
-+#endif
-+
- if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
- /* No IRQ or request_irq failed. Poll */
- socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/rdc/patches-2.6.27/005-fix_amit_breakage.patch b/target/linux/rdc/patches-2.6.27/005-fix_amit_breakage.patch
deleted file mode 100644
index eabfd04ed..000000000
--- a/target/linux/rdc/patches-2.6.27/005-fix_amit_breakage.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/boot.h
---- linux-2.6.24.7.orig/arch/x86/boot/boot.h 2008-10-26 20:18:14.000000000 -0700
-+++ linux-2.6.24.7/arch/x86/boot/boot.h 2008-10-26 20:18:36.000000000 -0700
-@@ -60,7 +60,7 @@
- {
- asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
- }
--static inline u32 inl(u32 port)
-+static inline u32 inl(u16 port)
- {
- u32 v;
- asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
-diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm.c
---- linux-2.6.24.7.orig/arch/x86/boot/pm.c 2008-10-26 19:55:50.000000000 -0700
-+++ linux-2.6.24.7/arch/x86/boot/pm.c 2008-10-26 21:38:12.000000000 -0700
-@@ -16,6 +16,9 @@
-
- #include "boot.h"
- #include <asm/segment.h>
-+#ifdef CONFIG_X86_RDC
-+#include <asm/mach-rdc/rdc321x_defs.h>
-+#endif
-
- /*
- * Invoke the realmode switch hook if present; otherwise
-@@ -160,6 +163,16 @@
- die();
- }
-
-+#ifdef CONFIG_X86_RDC
-+ {
-+ u32 bootctl;
-+
-+ outl(0x80003840, RDC3210_CFGREG_ADDR);
-+ bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
-+ outl(bootctl, RDC3210_CFGREG_DATA);
-+ }
-+#endif
-+
- /* Reset coprocessor (IGNNE#) */
- reset_coprocessor();
-
diff --git a/target/linux/rdc/patches-2.6.27/006-bzip2_lzma_x86.patch b/target/linux/rdc/patches-2.6.27/006-bzip2_lzma_x86.patch
deleted file mode 100644
index f11693fc7..000000000
--- a/target/linux/rdc/patches-2.6.27/006-bzip2_lzma_x86.patch
+++ /dev/null
@@ -1,3139 +0,0 @@
-diff -purN linux-2.6.27.6/arch/arm/boot/compressed/Makefile linux-2.6.27.6udpcast/arch/arm/boot/compressed/Makefile
---- linux-2.6.27.6/arch/arm/boot/compressed/Makefile 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/arch/arm/boot/compressed/Makefile 2008-11-16 23:02:55.000000000 +0100
-@@ -67,8 +67,15 @@ endif
-
- SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
-
--targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
-- head.o misc.o $(OBJS)
-+suffix_$(CONFIG_KERNEL_GZIP) = gz
-+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-+suffix_$(CONFIG_KERNEL_LZMA) = lzma
-+
-+targets := vmlinux vmlinux.lds \
-+ piggy.gz piggy.gz.o \
-+ piggy.bz2 piggy.bz2.o \
-+ piggy.lzma piggy.lzma.o \
-+ font.o font.c head.o misc.o $(OBJS)
-
- ifeq ($(CONFIG_FTRACE),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
-@@ -95,7 +102,7 @@ LDFLAGS_vmlinux += -p --no-undefined -X
- # would otherwise mess up our GOT table
- CFLAGS_misc.o := -Dstatic=
-
--$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) FORCE
- $(call if_changed,ld)
- @:
-@@ -103,7 +110,17 @@ $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj
- $(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
-
--$(obj)/piggy.o: $(obj)/piggy.gz FORCE
-+$(obj)/piggy.bz2: $(obj)/../Image FORCE
-+ $(call if_changed,bzip2)
-+
-+$(obj)/piggy.lzma: $(obj)/../Image FORCE
-+ $(call if_changed,lzma)
-+
-+$(obj)/piggy.gz.o: $(obj)/piggy.gz FORCE
-+
-+$(obj)/piggy.bz2.o: $(obj)/piggy.bz2 FORCE
-+
-+$(obj)/piggy.lzma.o: $(obj)/piggy.lzma FORCE
-
- CFLAGS_font.o := -Dstatic=
-
-diff -purN linux-2.6.27.6/arch/arm/boot/compressed/misc.c linux-2.6.27.6udpcast/arch/arm/boot/compressed/misc.c
---- linux-2.6.27.6/arch/arm/boot/compressed/misc.c 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/arch/arm/boot/compressed/misc.c 2008-11-16 23:02:55.000000000 +0100
-@@ -169,116 +169,34 @@ static inline __ptr_t memcpy(__ptr_t __d
- /*
- * gzip delarations
- */
--#define OF(args) args
- #define STATIC static
-
--typedef unsigned char uch;
--typedef unsigned short ush;
- typedef unsigned long ulg;
-
--#define WSIZE 0x8000 /* Window size must be at least 32k, */
-- /* and a power of two */
--
--static uch *inbuf; /* input buffer */
--static uch window[WSIZE]; /* Sliding window buffer */
--
--static unsigned insize; /* valid bytes in inbuf */
--static unsigned inptr; /* index of next byte to be processed in inbuf */
--static unsigned outcnt; /* bytes in output buffer */
--
--/* gzip flag byte */
--#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
--#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
--#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
--#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
--#define COMMENT 0x10 /* bit 4 set: file comment present */
--#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
--#define RESERVED 0xC0 /* bit 6,7: reserved */
--
--#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
--
--/* Diagnostic functions */
--#ifdef DEBUG
--# define Assert(cond,msg) {if(!(cond)) error(msg);}
--# define Trace(x) fprintf x
--# define Tracev(x) {if (verbose) fprintf x ;}
--# define Tracevv(x) {if (verbose>1) fprintf x ;}
--# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
--# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
--#else
--# define Assert(cond,msg)
--# define Trace(x)
--# define Tracev(x)
--# define Tracevv(x)
--# define Tracec(c,x)
--# define Tracecv(c,x)
--#endif
--
--static int fill_inbuf(void);
--static void flush_window(void);
--static void error(char *m);
--
- extern char input_data[];
- extern char input_data_end[];
-
--static uch *output_data;
--static ulg output_ptr;
--static ulg bytes_out;
--
- static void error(char *m);
-
--static void putstr(const char *);
--
--extern int end;
- static ulg free_mem_ptr;
- static ulg free_mem_end_ptr;
-
--#ifdef STANDALONE_DEBUG
--#define NO_INFLATE_MALLOC
--#endif
--
- #define ARCH_HAS_DECOMP_WDOG
-+#define NEW_CODE
-
-+#ifdef CONFIG_KERNEL_GZIP
- #include "../../../../lib/inflate.c"
-+#endif
-
--/* ===========================================================================
-- * Fill the input buffer. This is called only when the buffer is empty
-- * and at least one byte is really needed.
-- */
--int fill_inbuf(void)
--{
-- if (insize != 0)
-- error("ran out of input data");
-+#ifdef CONFIG_KERNEL_BZIP2
-+#include "../../../../lib/decompress_bunzip2.c"
-+#endif
-
-- inbuf = input_data;
-- insize = &input_data_end[0] - &input_data[0];
-+#ifdef CONFIG_KERNEL_LZMA
-+#include "../../../../lib/decompress_unlzma.c"
-+#endif
-
-- inptr = 1;
-- return inbuf[0];
--}
-
--/* ===========================================================================
-- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
-- * (Used for the decompressed data only.)
-- */
--void flush_window(void)
--{
-- ulg c = crc;
-- unsigned n;
-- uch *in, *out, ch;
--
-- in = window;
-- out = &output_data[output_ptr];
-- for (n = 0; n < outcnt; n++) {
-- ch = *out++ = *in++;
-- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-- }
-- crc = c;
-- bytes_out += (ulg)outcnt;
-- output_ptr += (ulg)outcnt;
-- outcnt = 0;
-- putstr(".");
--}
-
- #ifndef arch_error
- #define arch_error(x)
-@@ -301,16 +219,24 @@ ulg
- decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
- int arch_id)
- {
-- output_data = (uch *)output_start; /* Points to kernel start */
-- free_mem_ptr = free_mem_ptr_p;
-- free_mem_end_ptr = free_mem_ptr_end_p;
-+ ulg output_ptr;
-+ ulg *ptr;
-+ size_t input_len = input_data_end - input_data;
-+ size_t pos = 0;
-+
- __machine_arch_type = arch_id;
-
- arch_decomp_setup();
-
-- makecrc();
-- putstr("Uncompressing Linux...");
-- gunzip();
-+ ptr = (ulg *) (((long)input_data_end) - 4);
-+ output_ptr = output_start + *ptr;
-+
-+ free_mem_ptr = output_ptr;
-+ free_mem_end_ptr = output_ptr + 0x4000000;
-+
-+ putstr("Decompressing Linux...");
-+ decompress(input_data, input_len,
-+ NULL, NULL, (unsigned char *) output_start, &pos, error);
- putstr(" done, booting the kernel.\n");
- return output_ptr;
- }
-@@ -320,11 +246,8 @@ char output_buffer[1500*1024];
-
- int main()
- {
-- output_data = output_buffer;
--
-- makecrc();
- putstr("Uncompressing Linux...");
-- gunzip();
-+ decompress(input_data, input_len, NULL, output_buffer, NULL);
- putstr("done.\n");
- return 0;
- }
-diff -purN linux-2.6.27.6/arch/x86/boot/compressed/Makefile linux-2.6.27.6udpcast/arch/x86/boot/compressed/Makefile
---- linux-2.6.27.6/arch/x86/boot/compressed/Makefile 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/arch/x86/boot/compressed/Makefile 2008-11-16 23:42:51.000000000 +0100
-@@ -4,7 +4,7 @@
- # create a compressed vmlinux image from the original vmlinux
- #
-
--targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
-+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
-
- KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
- KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
-@@ -46,9 +46,17 @@ $(obj)/vmlinux.bin.all: $(vmlinux.bin.al
- ifdef CONFIG_RELOCATABLE
- $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
-+ $(call if_changed,bzip2)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-+ $(call if_changed,lzma)
- else
- $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
-+ $(call if_changed,bzip2)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-+ $(call if_changed,lzma)
- endif
- LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-
-@@ -59,6 +67,9 @@ $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bi
- LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
- endif
-
-+suffix_$(CONFIG_KERNEL_GZIP) = gz
-+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-+suffix_$(CONFIG_KERNEL_LZMA) = lzma
-
--$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
-diff -purN linux-2.6.27.6/arch/x86/boot/compressed/misc.c linux-2.6.27.6udpcast/arch/x86/boot/compressed/misc.c
---- linux-2.6.27.6/arch/x86/boot/compressed/misc.c 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/arch/x86/boot/compressed/misc.c 2008-11-16 23:02:55.000000000 +0100
-@@ -116,71 +116,13 @@
- /*
- * gzip declarations
- */
--
--#define OF(args) args
- #define STATIC static
-
- #undef memset
- #undef memcpy
- #define memzero(s, n) memset((s), 0, (n))
-
--typedef unsigned char uch;
--typedef unsigned short ush;
--typedef unsigned long ulg;
--
--/*
-- * Window size must be at least 32k, and a power of two.
-- * We don't actually have a window just a huge output buffer,
-- * so we report a 2G window size, as that should always be
-- * larger than our output buffer:
-- */
--#define WSIZE 0x80000000
-
--/* Input buffer: */
--static unsigned char *inbuf;
--
--/* Sliding window buffer (and final output buffer): */
--static unsigned char *window;
--
--/* Valid bytes in inbuf: */
--static unsigned insize;
--
--/* Index of next byte to be processed in inbuf: */
--static unsigned inptr;
--
--/* Bytes in output buffer: */
--static unsigned outcnt;
--
--/* gzip flag byte */
--#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
--#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gz file */
--#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
--#define ORIG_NAM 0x08 /* bit 3 set: original file name present */
--#define COMMENT 0x10 /* bit 4 set: file comment present */
--#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
--#define RESERVED 0xC0 /* bit 6, 7: reserved */
--
--#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
--
--/* Diagnostic functions */
--#ifdef DEBUG
--# define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
--# define Trace(x) do { fprintf x; } while (0)
--# define Tracev(x) do { if (verbose) fprintf x ; } while (0)
--# define Tracevv(x) do { if (verbose > 1) fprintf x ; } while (0)
--# define Tracec(c, x) do { if (verbose && (c)) fprintf x ; } while (0)
--# define Tracecv(c, x) do { if (verbose > 1 && (c)) fprintf x ; } while (0)
--#else
--# define Assert(cond, msg)
--# define Trace(x)
--# define Tracev(x)
--# define Tracevv(x)
--# define Tracec(c, x)
--# define Tracecv(c, x)
--#endif
--
--static int fill_inbuf(void);
--static void flush_window(void);
- static void error(char *m);
-
- /*
-@@ -189,11 +131,6 @@ static void error(char *m);
- static struct boot_params *real_mode; /* Pointer to real-mode data */
- static int quiet;
-
--extern unsigned char input_data[];
--extern int input_len;
--
--static long bytes_out;
--
- static void *memset(void *s, int c, unsigned n);
- static void *memcpy(void *dest, const void *src, unsigned n);
-
-@@ -213,7 +150,19 @@ static char *vidmem;
- static int vidport;
- static int lines, cols;
-
-+#define NEW_CODE
-+
-+#ifdef CONFIG_KERNEL_GZIP
- #include "../../../../lib/inflate.c"
-+#endif
-+
-+#ifdef CONFIG_KERNEL_BZIP2
-+#include "../../../../lib/decompress_bunzip2.c"
-+#endif
-+
-+#ifdef CONFIG_KERNEL_LZMA
-+#include "../../../../lib/decompress_unlzma.c"
-+#endif
-
- static void scroll(void)
- {
-@@ -291,38 +240,6 @@ static void *memcpy(void *dest, const vo
- return dest;
- }
-
--/* ===========================================================================
-- * Fill the input buffer. This is called only when the buffer is empty
-- * and at least one byte is really needed.
-- */
--static int fill_inbuf(void)
--{
-- error("ran out of input data");
-- return 0;
--}
--
--/* ===========================================================================
-- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
-- * (Used for the decompressed data only.)
-- */
--static void flush_window(void)
--{
-- /* With my window equal to my output buffer
-- * I only need to compute the crc here.
-- */
-- unsigned long c = crc; /* temporary variable */
-- unsigned n;
-- unsigned char *in, ch;
--
-- in = window;
-- for (n = 0; n < outcnt; n++) {
-- ch = *in++;
-- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-- }
-- crc = c;
-- bytes_out += (unsigned long)outcnt;
-- outcnt = 0;
--}
-
- static void error(char *x)
- {
-@@ -405,12 +322,8 @@ asmlinkage void decompress_kernel(void *
- lines = real_mode->screen_info.orig_video_lines;
- cols = real_mode->screen_info.orig_video_cols;
-
-- window = output; /* Output buffer (Normally at 1M) */
- free_mem_ptr = heap; /* Heap */
- free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
-- inbuf = input_data; /* Input buffer */
-- insize = input_len;
-- inptr = 0;
-
- #ifdef CONFIG_X86_64
- if ((unsigned long)output & (__KERNEL_ALIGN - 1))
-@@ -428,10 +341,9 @@ asmlinkage void decompress_kernel(void *
- #endif
- #endif
-
-- makecrc();
- if (!quiet)
- putstr("\nDecompressing Linux... ");
-- gunzip();
-+ decompress(input_data, input_len, NULL, NULL, output, NULL, error);
- parse_elf(output);
- if (!quiet)
- putstr("done.\nBooting the kernel.\n");
-diff -purN linux-2.6.27.6/drivers/block/Kconfig linux-2.6.27.6udpcast/drivers/block/Kconfig
---- linux-2.6.27.6/drivers/block/Kconfig 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/drivers/block/Kconfig 2008-11-16 23:02:55.000000000 +0100
-@@ -357,6 +357,30 @@ config BLK_DEV_XIP
- will prevent RAM block device backing store memory from being
- allocated from highmem (only a problem for highmem systems).
-
-+config RD_BZIP2
-+ bool "Initial ramdisk compressed using bzip2"
-+ default n
-+ depends on BLK_DEV_INITRD=y
-+ help
-+ Support loading of a bzip2 encoded initial ramdisk or cpio buffer
-+ If unsure, say N.
-+
-+config RD_LZMA
-+ bool "Initial ramdisk compressed using lzma"
-+ default n
-+ depends on BLK_DEV_INITRD=y
-+ help
-+ Support loading of a lzma encoded initial ramdisk or cpio buffer
-+ If unsure, say N.
-+
-+config RD_GZIP
-+ bool "Initial ramdisk compressed using gzip"
-+ default y
-+ depends on BLK_DEV_INITRD=y
-+ help
-+ Support loading of a gzip encoded initial ramdisk or cpio buffer.
-+ If unsure, say Y.
-+
- config CDROM_PKTCDVD
- tristate "Packet writing on CD/DVD media"
- depends on !UML
-diff -purN linux-2.6.27.6/include/asm-x86/boot.h linux-2.6.27.6udpcast/include/asm-x86/boot.h
---- linux-2.6.27.6/include/asm-x86/boot.h 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/asm-x86/boot.h 2008-11-16 23:02:55.000000000 +0100
-@@ -17,11 +17,21 @@
- + (CONFIG_PHYSICAL_ALIGN - 1)) \
- & ~(CONFIG_PHYSICAL_ALIGN - 1))
-
-+#if (defined CONFIG_KERNEL_BZIP2)
-+#define BOOT_HEAP_SIZE 0x400000
-+#else
-+
- #ifdef CONFIG_X86_64
- #define BOOT_HEAP_SIZE 0x7000
--#define BOOT_STACK_SIZE 0x4000
- #else
- #define BOOT_HEAP_SIZE 0x4000
-+#endif
-+
-+#endif
-+
-+#ifdef CONFIG_X86_64
-+#define BOOT_STACK_SIZE 0x4000
-+#else
- #define BOOT_STACK_SIZE 0x1000
- #endif
-
-diff -purN linux-2.6.27.6/include/linux/decompress/bunzip2.h linux-2.6.27.6udpcast/include/linux/decompress/bunzip2.h
---- linux-2.6.27.6/include/linux/decompress/bunzip2.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/linux/decompress/bunzip2.h 2008-11-16 23:34:15.000000000 +0100
-@@ -0,0 +1,10 @@
-+#ifndef DECOMPRESS_BUNZIP2_H
-+#define DECOMPRESS_BUNZIP2_H
-+
-+int bunzip2(unsigned char *inbuf, int len,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *output,
-+ int *pos,
-+ void(*error)(char *x));
-+#endif
-diff -purN linux-2.6.27.6/include/linux/decompress/generic.h linux-2.6.27.6udpcast/include/linux/decompress/generic.h
---- linux-2.6.27.6/include/linux/decompress/generic.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/linux/decompress/generic.h 2008-11-16 23:34:15.000000000 +0100
-@@ -0,0 +1,30 @@
-+#ifndef DECOMPRESS_GENERIC_H
-+#define DECOMPRESS_GENERIC_H
-+
-+/* Minimal chunksize to be read.
-+ *Bzip2 prefers at least 4096
-+ *Lzma prefers 0x10000 */
-+#define COMPR_IOBUF_SIZE 4096
-+
-+typedef int (*decompress_fn) (unsigned char *inbuf, int len,
-+ int(*fill)(void*, unsigned int),
-+ int(*writebb)(void*, unsigned int),
-+ unsigned char *output,
-+ int *posp,
-+ void(*error)(char *x));
-+
-+/* inbuf - input buffer
-+ *len - len of pre-read data in inbuf
-+ *fill - function to fill inbuf if empty
-+ *writebb - function to write out outbug
-+ *posp - if non-null, input position (number of bytes read) will be
-+ * returned here
-+ *
-+ *If len != 0, the inbuf is initialized (with as much data), and fill
-+ *should not be called
-+ *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE
-+ *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE
-+ */
-+
-+
-+#endif
-diff -purN linux-2.6.27.6/include/linux/decompress/inflate.h linux-2.6.27.6udpcast/include/linux/decompress/inflate.h
---- linux-2.6.27.6/include/linux/decompress/inflate.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/linux/decompress/inflate.h 2008-11-16 23:34:15.000000000 +0100
-@@ -0,0 +1,13 @@
-+#ifndef INFLATE_H
-+#define INFLATE_H
-+
-+/* Other housekeeping constants */
-+#define INBUFSIZ 4096
-+
-+int gunzip(unsigned char *inbuf, int len,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *output,
-+ int *pos,
-+ void(*error_fn)(char *x));
-+#endif
-diff -purN linux-2.6.27.6/include/linux/decompress/mm.h linux-2.6.27.6udpcast/include/linux/decompress/mm.h
---- linux-2.6.27.6/include/linux/decompress/mm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/linux/decompress/mm.h 2008-11-16 23:34:15.000000000 +0100
-@@ -0,0 +1,89 @@
-+/*
-+ * linux/compr_mm.h
-+ *
-+ * Memory management for pre-boot and ramdisk uncompressors
-+ *
-+ * Authors: Alain Knaff <alain@knaff.lu>
-+ *
-+ */
-+
-+#ifndef DECOMPR_MM_H
-+#define DECOMPR_MM_H
-+
-+#ifdef STATIC
-+
-+/* Code active when included from pre-boot environment: */
-+
-+/* A trivial malloc implementation, adapted from
-+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
-+ */
-+static unsigned long malloc_ptr;
-+static int malloc_count;
-+
-+static void *malloc(int size)
-+{
-+ void *p;
-+
-+ if (size < 0)
-+ error("Malloc error");
-+ if (!malloc_ptr)
-+ malloc_ptr = free_mem_ptr;
-+
-+ malloc_ptr = (malloc_ptr + 3) & ~3; /* Align */
-+
-+ p = (void *)malloc_ptr;
-+ malloc_ptr += size;
-+
-+ if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
-+ error("Out of memory");
-+
-+ malloc_count++;
-+ return p;
-+}
-+
-+static void free(void *where)
-+{
-+ malloc_count--;
-+ if (!malloc_count)
-+ malloc_ptr = free_mem_ptr;
-+}
-+
-+#define large_malloc(a) malloc(a)
-+#define large_free(a) free(a)
-+
-+#define set_error_fn(x)
-+#define panic error
-+
-+#define INIT
-+
-+#else /* STATIC */
-+
-+/* Code active when compiled standalone for use when loading ramdisk: */
-+
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/string.h>
-+#include <linux/vmalloc.h>
-+
-+/* Use defines rather than static inline in order to avoid spurious
-+ * warnings when not needed (indeed large_malloc / large_free are not
-+ * needed by inflate */
-+
-+#define malloc(a) kmalloc(a, GFP_KERNEL)
-+#define free(a) kfree(a)
-+
-+#define large_malloc(a) vmalloc(a)
-+#define large_free(a) vfree(a)
-+
-+static void(*error)(char *m);
-+#define set_error_fn(x) error = x;
-+#define NEW_CODE
-+
-+#define INIT __init
-+#define STATIC
-+
-+#include <linux/init.h>
-+
-+#endif /* STATIC */
-+
-+#endif /* DECOMPR_MM_H */
-diff -purN linux-2.6.27.6/include/linux/decompress/unlzma.h linux-2.6.27.6udpcast/include/linux/decompress/unlzma.h
---- linux-2.6.27.6/include/linux/decompress/unlzma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/include/linux/decompress/unlzma.h 2008-11-16 23:34:15.000000000 +0100
-@@ -0,0 +1,12 @@
-+#ifndef DECOMPRESS_UNLZMA_H
-+#define DECOMPRESS_UNLZMA_H
-+
-+int unlzma(unsigned char *, int,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *output,
-+ int *posp,
-+ void(*error)(char *x)
-+ );
-+
-+#endif
-diff -purN linux-2.6.27.6/init/do_mounts_rd.c linux-2.6.27.6udpcast/init/do_mounts_rd.c
---- linux-2.6.27.6/init/do_mounts_rd.c 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/init/do_mounts_rd.c 2008-11-16 23:02:55.000000000 +0100
-@@ -10,6 +10,12 @@
-
- #include "do_mounts.h"
-
-+#include <linux/decompress/generic.h>
-+
-+#include <linux/decompress/bunzip2.h>
-+#include <linux/decompress/unlzma.h>
-+#include <linux/decompress/inflate.h>
-+
- int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
-
- static int __init prompt_ramdisk(char *str)
-@@ -28,7 +34,7 @@ static int __init ramdisk_start_setup(ch
- }
- __setup("ramdisk_start=", ramdisk_start_setup);
-
--static int __init crd_load(int in_fd, int out_fd);
-+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
-
- /*
- * This routine tries to find a RAM disk image to load, and returns the
-@@ -44,7 +50,7 @@ static int __init crd_load(int in_fd, in
- * gzip
- */
- static int __init
--identify_ramdisk_image(int fd, int start_block)
-+identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
- {
- const int size = 512;
- struct minix_super_block *minixsb;
-@@ -70,6 +76,7 @@ identify_ramdisk_image(int fd, int start
- sys_lseek(fd, start_block * BLOCK_SIZE, 0);
- sys_read(fd, buf, size);
-
-+#ifdef CONFIG_RD_GZIP
- /*
- * If it matches the gzip magic numbers, return -1
- */
-@@ -77,9 +84,39 @@ identify_ramdisk_image(int fd, int start
- printk(KERN_NOTICE
- "RAMDISK: Compressed image found at block %d\n",
- start_block);
-+ *decompressor = gunzip;
-+ nblocks = 0;
-+ goto done;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RD_BZIP2
-+ /*
-+ * If it matches the bzip2 magic numbers, return -1
-+ */
-+ if (buf[0] == 0x42 && (buf[1] == 0x5a)) {
-+ printk(KERN_NOTICE
-+ "RAMDISK: Bzipped image found at block %d\n",
-+ start_block);
-+ *decompressor = bunzip2;
- nblocks = 0;
- goto done;
- }
-+#endif
-+
-+#ifdef CONFIG_RD_LZMA
-+ /*
-+ * If it matches the lzma magic numbers, return -1
-+ */
-+ if (buf[0] == 0x5d && (buf[1] == 0x00)) {
-+ printk(KERN_NOTICE
-+ "RAMDISK: Lzma image found at block %d\n",
-+ start_block);
-+ *decompressor = unlzma;
-+ nblocks = 0;
-+ goto done;
-+ }
-+#endif
-
- /* romfs is at block zero too */
- if (romfsb->word0 == ROMSB_WORD0 &&
-@@ -143,6 +180,7 @@ int __init rd_load_image(char *from)
- int nblocks, i, disk;
- char *buf = NULL;
- unsigned short rotate = 0;
-+ decompress_fn decompressor = NULL;
- #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
- char rotator[4] = { '|' , '/' , '-' , '\\' };
- #endif
-@@ -155,12 +193,12 @@ int __init rd_load_image(char *from)
- if (in_fd < 0)
- goto noclose_input;
-
-- nblocks = identify_ramdisk_image(in_fd, rd_image_start);
-+ nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
- if (nblocks < 0)
- goto done;
-
- if (nblocks == 0) {
-- if (crd_load(in_fd, out_fd) == 0)
-+ if (crd_load(in_fd, out_fd, decompressor) == 0)
- goto successful_load;
- goto done;
- }
-@@ -259,138 +297,48 @@ int __init rd_load_disk(int n)
- return rd_load_image("/dev/root");
- }
-
--/*
-- * gzip declarations
-- */
--
--#define OF(args) args
--
--#ifndef memzero
--#define memzero(s, n) memset ((s), 0, (n))
--#endif
--
--typedef unsigned char uch;
--typedef unsigned short ush;
--typedef unsigned long ulg;
--
--#define INBUFSIZ 4096
--#define WSIZE 0x8000 /* window size--must be a power of two, and */
-- /* at least 32K for zip's deflate method */
--
--static uch *inbuf;
--static uch *window;
--
--static unsigned insize; /* valid bytes in inbuf */
--static unsigned inptr; /* index of next byte to be processed in inbuf */
--static unsigned outcnt; /* bytes in output buffer */
- static int exit_code;
--static int unzip_error;
--static long bytes_out;
-+static int decompress_error;
- static int crd_infd, crd_outfd;
-
--#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
--
--/* Diagnostic functions (stubbed out) */
--#define Assert(cond,msg)
--#define Trace(x)
--#define Tracev(x)
--#define Tracevv(x)
--#define Tracec(c,x)
--#define Tracecv(c,x)
--
--#define STATIC static
--#define INIT __init
--
--static int __init fill_inbuf(void);
--static void __init flush_window(void);
--static void __init error(char *m);
--
--#define NO_INFLATE_MALLOC
--
--#include "../lib/inflate.c"
--
--/* ===========================================================================
-- * Fill the input buffer. This is called only when the buffer is empty
-- * and at least one byte is really needed.
-- * Returning -1 does not guarantee that gunzip() will ever return.
-- */
--static int __init fill_inbuf(void)
-+static int __init compr_fill(void *buf, unsigned int len)
- {
-- if (exit_code) return -1;
--
-- insize = sys_read(crd_infd, inbuf, INBUFSIZ);
-- if (insize == 0) {
-- error("RAMDISK: ran out of compressed data");
-- return -1;
-- }
--
-- inptr = 1;
--
-- return inbuf[0];
-+ int r = sys_read(crd_infd, buf, len);
-+ if (r < 0)
-+ printk(KERN_ERR "RAMDISK: error while reading compressed data");
-+ else if (r == 0)
-+ printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
-+ return r;
- }
-
--/* ===========================================================================
-- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
-- * (Used for the decompressed data only.)
-- */
--static void __init flush_window(void)
-+static int __init compr_flush(void *window, unsigned int outcnt)
- {
-- ulg c = crc; /* temporary variable */
-- unsigned n, written;
-- uch *in, ch;
--
-- written = sys_write(crd_outfd, window, outcnt);
-- if (written != outcnt && unzip_error == 0) {
-- printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
-- written, outcnt, bytes_out);
-- unzip_error = 1;
-- }
-- in = window;
-- for (n = 0; n < outcnt; n++) {
-- ch = *in++;
-- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-- }
-- crc = c;
-- bytes_out += (ulg)outcnt;
-- outcnt = 0;
-+ int written = sys_write(crd_outfd, window, outcnt);
-+ if (written != outcnt) {
-+ if (decompress_error == 0)
-+ printk(KERN_ERR
-+ "RAMDISK: incomplete write (%d != %d)\n",
-+ written, outcnt);
-+ decompress_error = 1;
-+ return -1;
-+ }
-+ return outcnt;
- }
-
- static void __init error(char *x)
- {
- printk(KERN_ERR "%s\n", x);
- exit_code = 1;
-- unzip_error = 1;
-+ decompress_error = 1;
- }
-
--static int __init crd_load(int in_fd, int out_fd)
-+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
- {
- int result;
--
-- insize = 0; /* valid bytes in inbuf */
-- inptr = 0; /* index of next byte to be processed in inbuf */
-- outcnt = 0; /* bytes in output buffer */
-- exit_code = 0;
-- bytes_out = 0;
-- crc = (ulg)0xffffffffL; /* shift register contents */
--
- crd_infd = in_fd;
- crd_outfd = out_fd;
-- inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
-- if (!inbuf) {
-- printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
-- return -1;
-- }
-- window = kmalloc(WSIZE, GFP_KERNEL);
-- if (!window) {
-- printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
-- kfree(inbuf);
-- return -1;
-- }
-- makecrc();
-- result = gunzip();
-- if (unzip_error)
-+ result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
-+ if (decompress_error)
- result = 1;
-- kfree(inbuf);
-- kfree(window);
- return result;
- }
-diff -purN linux-2.6.27.6/init/initramfs.c linux-2.6.27.6udpcast/init/initramfs.c
---- linux-2.6.27.6/init/initramfs.c 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/init/initramfs.c 2008-11-16 23:02:55.000000000 +0100
-@@ -337,11 +337,14 @@ static int __init write_buffer(char *buf
- return len - count;
- }
-
--static void __init flush_buffer(char *buf, unsigned len)
-+
-+static int __init flush_buffer(void *bufv, unsigned len)
- {
-+ char *buf = (char *) bufv;
- int written;
-+ int origLen = len;
- if (message)
-- return;
-+ return -1;
- while ((written = write_buffer(buf, len)) < len && !message) {
- char c = buf[written];
- if (c == '0') {
-@@ -355,73 +358,14 @@ static void __init flush_buffer(char *bu
- } else
- error("junk in compressed archive");
- }
-+ return origLen;
- }
-
--/*
-- * gzip declarations
-- */
--
--#define OF(args) args
--
--#ifndef memzero
--#define memzero(s, n) memset ((s), 0, (n))
--#endif
-+static unsigned my_inptr; /* index of next byte to be processed in inbuf */
-
--typedef unsigned char uch;
--typedef unsigned short ush;
--typedef unsigned long ulg;
--
--#define WSIZE 0x8000 /* window size--must be a power of two, and */
-- /* at least 32K for zip's deflate method */
--
--static uch *inbuf;
--static uch *window;
--
--static unsigned insize; /* valid bytes in inbuf */
--static unsigned inptr; /* index of next byte to be processed in inbuf */
--static unsigned outcnt; /* bytes in output buffer */
--static long bytes_out;
--
--#define get_byte() (inptr < insize ? inbuf[inptr++] : -1)
--
--/* Diagnostic functions (stubbed out) */
--#define Assert(cond,msg)
--#define Trace(x)
--#define Tracev(x)
--#define Tracevv(x)
--#define Tracec(c,x)
--#define Tracecv(c,x)
--
--#define STATIC static
--#define INIT __init
--
--static void __init flush_window(void);
--static void __init error(char *m);
--
--#define NO_INFLATE_MALLOC
--
--#include "../lib/inflate.c"
--
--/* ===========================================================================
-- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
-- * (Used for the decompressed data only.)
-- */
--static void __init flush_window(void)
--{
-- ulg c = crc; /* temporary variable */
-- unsigned n;
-- uch *in, ch;
--
-- flush_buffer(window, outcnt);
-- in = window;
-- for (n = 0; n < outcnt; n++) {
-- ch = *in++;
-- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-- }
-- crc = c;
-- bytes_out += (ulg)outcnt;
-- outcnt = 0;
--}
-+#include <linux/decompress/bunzip2.h>
-+#include <linux/decompress/unlzma.h>
-+#include <linux/decompress/inflate.h>
-
- static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
- {
-@@ -430,9 +374,10 @@ static char * __init unpack_to_rootfs(ch
- header_buf = kmalloc(110, GFP_KERNEL);
- symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL);
- name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL);
-- window = kmalloc(WSIZE, GFP_KERNEL);
-- if (!window || !header_buf || !symlink_buf || !name_buf)
-+
-+ if (!header_buf || !symlink_buf || !name_buf)
- panic("can't allocate buffers");
-+
- state = Start;
- this_header = 0;
- message = NULL;
-@@ -452,21 +397,39 @@ static char * __init unpack_to_rootfs(ch
- continue;
- }
- this_header = 0;
-- insize = len;
-- inbuf = buf;
-- inptr = 0;
-- outcnt = 0; /* bytes in output buffer */
-- bytes_out = 0;
-- crc = (ulg)0xffffffffL; /* shift register contents */
-- makecrc();
-- gunzip();
-+ if (!gunzip(buf, len, NULL, flush_buffer, NULL,
-+ &my_inptr, error) &&
-+ message == NULL)
-+ goto ok;
-+
-+#ifdef CONFIG_RD_BZIP2
-+ message = NULL; /* Zero out message, or else cpio will
-+ think an error has already occured */
-+ if (!bunzip2(buf, len, NULL, flush_buffer, NULL,
-+ &my_inptr, error) < 0
-+ &&
-+ message == NULL) {
-+ goto ok;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RD_LZMA
-+ message = NULL; /* Zero out message, or else cpio will
-+ think an error has already occured */
-+ if (!unlzma(buf, len, NULL, flush_buffer, NULL,
-+ &my_inptr, error) < 0
-+ &&
-+ message == NULL) {
-+ goto ok;
-+ }
-+#endif
-+ok:
- if (state != Reset)
-- error("junk in gzipped archive");
-- this_header = saved_offset + inptr;
-- buf += inptr;
-- len -= inptr;
-+ error("junk in compressed archive");
-+ this_header = saved_offset + my_inptr;
-+ buf += my_inptr;
-+ len -= my_inptr;
- }
-- kfree(window);
- kfree(name_buf);
- kfree(symlink_buf);
- kfree(header_buf);
-diff -purN linux-2.6.27.6/init/Kconfig linux-2.6.27.6udpcast/init/Kconfig
---- linux-2.6.27.6/init/Kconfig 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/init/Kconfig 2008-11-16 23:02:55.000000000 +0100
-@@ -101,6 +101,56 @@ config LOCALVERSION_AUTO
-
- which is done within the script "scripts/setlocalversion".)
-
-+choice
-+ prompt "Kernel compression mode"
-+ default KERNEL_GZIP
-+ help
-+ The linux kernel is a kind of self-extracting executable.
-+ Several compression algorithms are available, which differ
-+ in efficiency, compression and decompression speed.
-+ Compression speed is only relevant when building a kernel.
-+ Decompression speed is relevant at each boot.
-+
-+ If you have any problems with bzip2 or lzma compressed
-+ kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
-+ version of this functionality (bzip2 only), for 2.4, was
-+ supplied by Christian Ludwig)
-+
-+ High compression options are mostly useful for users, who
-+ are low on disk space (embedded systems), but for whom ram
-+ size matters less.
-+
-+ If in doubt, select 'gzip'
-+
-+config KERNEL_GZIP
-+ bool "Gzip"
-+ help
-+ The old and tried gzip compression. Its compression ratio is
-+ the poorest among the 3 choices; however its speed (both
-+ compression and decompression) is the fastest.
-+
-+config KERNEL_BZIP2
-+ bool "Bzip2"
-+ help
-+ Its compression ratio and speed is intermediate.
-+ Decompression speed is slowest among the 3.
-+ The kernel size is about 10 per cent smaller with bzip2,
-+ in comparison to gzip.
-+ Bzip2 uses a large amount of memory. For modern kernels
-+ you will need at least 8MB RAM or more for booting.
-+
-+config KERNEL_LZMA
-+ bool "LZMA"
-+ help
-+ The most recent compression algorithm.
-+ Its ratio is best, decompression speed is between the other
-+ 2. Compression is slowest.
-+ The kernel size is about 33 per cent smaller with lzma,
-+ in comparison to gzip.
-+
-+endchoice
-+
-+
- config SWAP
- bool "Support for paging of anonymous memory (swap)"
- depends on MMU && BLOCK
-diff -purN linux-2.6.27.6/lib/decompress_bunzip2.c linux-2.6.27.6udpcast/lib/decompress_bunzip2.c
---- linux-2.6.27.6/lib/decompress_bunzip2.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/lib/decompress_bunzip2.c 2008-11-16 23:40:21.000000000 +0100
-@@ -0,0 +1,735 @@
-+/* vi: set sw = 4 ts = 4: */
-+/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net).
-+
-+ Based on bzip2 decompression code by Julian R Seward (jseward@acm.org),
-+ which also acknowledges contributions by Mike Burrows, David Wheeler,
-+ Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten,
-+ Robert Sedgewick, and Jon L. Bentley.
-+
-+ This code is licensed under the LGPLv2:
-+ LGPL (http://www.gnu.org/copyleft/lgpl.html
-+*/
-+
-+/*
-+ Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org).
-+
-+ More efficient reading of Huffman codes, a streamlined read_bunzip()
-+ function, and various other tweaks. In (limited) tests, approximately
-+ 20% faster than bzcat on x86 and about 10% faster on arm.
-+
-+ Note that about 2/3 of the time is spent in read_unzip() reversing
-+ the Burrows-Wheeler transformation. Much of that time is delay
-+ resulting from cache misses.
-+
-+ I would ask that anyone benefiting from this work, especially those
-+ using it in commercial products, consider making a donation to my local
-+ non-profit hospice organization in the name of the woman I loved, who
-+ passed away Feb. 12, 2003.
-+
-+ In memory of Toni W. Hagan
-+
-+ Hospice of Acadiana, Inc.
-+ 2600 Johnston St., Suite 200
-+ Lafayette, LA 70503-3240
-+
-+ Phone (337) 232-1234 or 1-800-738-2226
-+ Fax (337) 232-1297
-+
-+ http://www.hospiceacadiana.com/
-+
-+ Manuel
-+ */
-+
-+/*
-+ Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu)
-+*/
-+
-+
-+#ifndef STATIC
-+#include <linux/decompress/bunzip2.h>
-+#endif /* !STATIC */
-+
-+#include <linux/decompress/mm.h>
-+
-+#ifndef INT_MAX
-+#define INT_MAX 0x7fffffff
-+#endif
-+
-+/* Constants for Huffman coding */
-+#define MAX_GROUPS 6
-+#define GROUP_SIZE 50 /* 64 would have been more efficient */
-+#define MAX_HUFCODE_BITS 20 /* Longest Huffman code allowed */
-+#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */
-+#define SYMBOL_RUNA 0
-+#define SYMBOL_RUNB 1
-+
-+/* Status return values */
-+#define RETVAL_OK 0
-+#define RETVAL_LAST_BLOCK (-1)
-+#define RETVAL_NOT_BZIP_DATA (-2)
-+#define RETVAL_UNEXPECTED_INPUT_EOF (-3)
-+#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4)
-+#define RETVAL_DATA_ERROR (-5)
-+#define RETVAL_OUT_OF_MEMORY (-6)
-+#define RETVAL_OBSOLETE_INPUT (-7)
-+
-+/* Other housekeeping constants */
-+#define BZIP2_IOBUF_SIZE 4096
-+
-+/* This is what we know about each Huffman coding group */
-+struct group_data {
-+ /* We have an extra slot at the end of limit[] for a sentinal value. */
-+ int limit[MAX_HUFCODE_BITS+1];
-+ int base[MAX_HUFCODE_BITS];
-+ int permute[MAX_SYMBOLS];
-+ int minLen, maxLen;
-+};
-+
-+/* Structure holding all the housekeeping data, including IO buffers and
-+ memory that persists between calls to bunzip */
-+struct bunzip_data {
-+ /* State for interrupting output loop */
-+ int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent;
-+ /* I/O tracking data (file handles, buffers, positions, etc.) */
-+ int (*fill)(void*, unsigned int);
-+ int inbufCount, inbufPos /*, outbufPos*/;
-+ unsigned char *inbuf /*,*outbuf*/;
-+ unsigned int inbufBitCount, inbufBits;
-+ /* The CRC values stored in the block header and calculated from the
-+ data */
-+ unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC;
-+ /* Intermediate buffer and its size (in bytes) */
-+ unsigned int *dbuf, dbufSize;
-+ /* These things are a bit too big to go on the stack */
-+ unsigned char selectors[32768]; /* nSelectors = 15 bits */
-+ struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */
-+ int io_error; /* non-zero if we have IO error */
-+};
-+
-+
-+/* Return the next nnn bits of input. All reads from the compressed input
-+ are done through this function. All reads are big endian */
-+static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted)
-+{
-+ unsigned int bits = 0;
-+
-+ /* If we need to get more data from the byte buffer, do so.
-+ (Loop getting one byte at a time to enforce endianness and avoid
-+ unaligned access.) */
-+ while (bd->inbufBitCount < bits_wanted) {
-+ /* If we need to read more data from file into byte buffer, do
-+ so */
-+ if (bd->inbufPos == bd->inbufCount) {
-+ if (bd->io_error)
-+ return 0;
-+ bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE);
-+ if (bd->inbufCount <= 0) {
-+ bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF;
-+ return 0;
-+ }
-+ bd->inbufPos = 0;
-+ }
-+ /* Avoid 32-bit overflow (dump bit buffer to top of output) */
-+ if (bd->inbufBitCount >= 24) {
-+ bits = bd->inbufBits&((1 << bd->inbufBitCount)-1);
-+ bits_wanted -= bd->inbufBitCount;
-+ bits <<= bits_wanted;
-+ bd->inbufBitCount = 0;
-+ }
-+ /* Grab next 8 bits of input from buffer. */
-+ bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
-+ bd->inbufBitCount += 8;
-+ }
-+ /* Calculate result */
-+ bd->inbufBitCount -= bits_wanted;
-+ bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1);
-+
-+ return bits;
-+}
-+
-+/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */
-+
-+static int INIT get_next_block(struct bunzip_data *bd)
-+{
-+ struct group_data *hufGroup = NULL;
-+ int *base = NULL;
-+ int *limit = NULL;
-+ int dbufCount, nextSym, dbufSize, groupCount, selector,
-+ i, j, k, t, runPos, symCount, symTotal, nSelectors,
-+ byteCount[256];
-+ unsigned char uc, symToByte[256], mtfSymbol[256], *selectors;
-+ unsigned int *dbuf, origPtr;
-+
-+ dbuf = bd->dbuf;
-+ dbufSize = bd->dbufSize;
-+ selectors = bd->selectors;
-+
-+ /* Read in header signature and CRC, then validate signature.
-+ (last block signature means CRC is for whole file, return now) */
-+ i = get_bits(bd, 24);
-+ j = get_bits(bd, 24);
-+ bd->headerCRC = get_bits(bd, 32);
-+ if ((i == 0x177245) && (j == 0x385090))
-+ return RETVAL_LAST_BLOCK;
-+ if ((i != 0x314159) || (j != 0x265359))
-+ return RETVAL_NOT_BZIP_DATA;
-+ /* We can add support for blockRandomised if anybody complains.
-+ There was some code for this in busybox 1.0.0-pre3, but nobody ever
-+ noticed that it didn't actually work. */
-+ if (get_bits(bd, 1))
-+ return RETVAL_OBSOLETE_INPUT;
-+ origPtr = get_bits(bd, 24);
-+ if (origPtr > dbufSize)
-+ return RETVAL_DATA_ERROR;
-+ /* mapping table: if some byte values are never used (encoding things
-+ like ascii text), the compression code removes the gaps to have fewer
-+ symbols to deal with, and writes a sparse bitfield indicating which
-+ values were present. We make a translation table to convert the
-+ symbols back to the corresponding bytes. */
-+ t = get_bits(bd, 16);
-+ symTotal = 0;
-+ for (i = 0; i < 16; i++) {
-+ if (t&(1 << (15-i))) {
-+ k = get_bits(bd, 16);
-+ for (j = 0; j < 16; j++)
-+ if (k&(1 << (15-j)))
-+ symToByte[symTotal++] = (16*i)+j;
-+ }
-+ }
-+ /* How many different Huffman coding groups does this block use? */
-+ groupCount = get_bits(bd, 3);
-+ if (groupCount < 2 || groupCount > MAX_GROUPS)
-+ return RETVAL_DATA_ERROR;
-+ /* nSelectors: Every GROUP_SIZE many symbols we select a new
-+ Huffman coding group. Read in the group selector list,
-+ which is stored as MTF encoded bit runs. (MTF = Move To
-+ Front, as each value is used it's moved to the start of the
-+ list.) */
-+ nSelectors = get_bits(bd, 15);
-+ if (!nSelectors)
-+ return RETVAL_DATA_ERROR;
-+ for (i = 0; i < groupCount; i++)
-+ mtfSymbol[i] = i;
-+ for (i = 0; i < nSelectors; i++) {
-+ /* Get next value */
-+ for (j = 0; get_bits(bd, 1); j++)
-+ if (j >= groupCount)
-+ return RETVAL_DATA_ERROR;
-+ /* Decode MTF to get the next selector */
-+ uc = mtfSymbol[j];
-+ for (; j; j--)
-+ mtfSymbol[j] = mtfSymbol[j-1];
-+ mtfSymbol[0] = selectors[i] = uc;
-+ }
-+ /* Read the Huffman coding tables for each group, which code
-+ for symTotal literal symbols, plus two run symbols (RUNA,
-+ RUNB) */
-+ symCount = symTotal+2;
-+ for (j = 0; j < groupCount; j++) {
-+ unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1];
-+ int minLen, maxLen, pp;
-+ /* Read Huffman code lengths for each symbol. They're
-+ stored in a way similar to mtf; record a starting
-+ value for the first symbol, and an offset from the
-+ previous value for everys symbol after that.
-+ (Subtracting 1 before the loop and then adding it
-+ back at the end is an optimization that makes the
-+ test inside the loop simpler: symbol length 0
-+ becomes negative, so an unsigned inequality catches
-+ it.) */
-+ t = get_bits(bd, 5)-1;
-+ for (i = 0; i < symCount; i++) {
-+ for (;;) {
-+ if (((unsigned)t) > (MAX_HUFCODE_BITS-1))
-+ return RETVAL_DATA_ERROR;
-+
-+ /* If first bit is 0, stop. Else
-+ second bit indicates whether to
-+ increment or decrement the value.
-+ Optimization: grab 2 bits and unget
-+ the second if the first was 0. */
-+
-+ k = get_bits(bd, 2);
-+ if (k < 2) {
-+ bd->inbufBitCount++;
-+ break;
-+ }
-+ /* Add one if second bit 1, else
-+ * subtract 1. Avoids if/else */
-+ t += (((k+1)&2)-1);
-+ }
-+ /* Correct for the initial -1, to get the
-+ * final symbol length */
-+ length[i] = t+1;
-+ }
-+ /* Find largest and smallest lengths in this group */
-+ minLen = maxLen = length[0];
-+
-+ for (i = 1; i < symCount; i++) {
-+ if (length[i] > maxLen)
-+ maxLen = length[i];
-+ else if (length[i] < minLen)
-+ minLen = length[i];
-+ }
-+
-+ /* Calculate permute[], base[], and limit[] tables from
-+ * length[].
-+ *
-+ * permute[] is the lookup table for converting
-+ * Huffman coded symbols into decoded symbols. base[]
-+ * is the amount to subtract from the value of a
-+ * Huffman symbol of a given length when using
-+ * permute[].
-+ *
-+ * limit[] indicates the largest numerical value a
-+ * symbol with a given number of bits can have. This
-+ * is how the Huffman codes can vary in length: each
-+ * code with a value > limit[length] needs another
-+ * bit.
-+ */
-+ hufGroup = bd->groups+j;
-+ hufGroup->minLen = minLen;
-+ hufGroup->maxLen = maxLen;
-+ /* Note that minLen can't be smaller than 1, so we
-+ adjust the base and limit array pointers so we're
-+ not always wasting the first entry. We do this
-+ again when using them (during symbol decoding).*/
-+ base = hufGroup->base-1;
-+ limit = hufGroup->limit-1;
-+ /* Calculate permute[]. Concurently, initialize
-+ * temp[] and limit[]. */
-+ pp = 0;
-+ for (i = minLen; i <= maxLen; i++) {
-+ temp[i] = limit[i] = 0;
-+ for (t = 0; t < symCount; t++)
-+ if (length[t] == i)
-+ hufGroup->permute[pp++] = t;
-+ }
-+ /* Count symbols coded for at each bit length */
-+ for (i = 0; i < symCount; i++)
-+ temp[length[i]]++;
-+ /* Calculate limit[] (the largest symbol-coding value
-+ *at each bit length, which is (previous limit <<
-+ *1)+symbols at this level), and base[] (number of
-+ *symbols to ignore at each bit length, which is limit
-+ *minus the cumulative count of symbols coded for
-+ *already). */
-+ pp = t = 0;
-+ for (i = minLen; i < maxLen; i++) {
-+ pp += temp[i];
-+ /* We read the largest possible symbol size
-+ and then unget bits after determining how
-+ many we need, and those extra bits could be
-+ set to anything. (They're noise from
-+ future symbols.) At each level we're
-+ really only interested in the first few
-+ bits, so here we set all the trailing
-+ to-be-ignored bits to 1 so they don't
-+ affect the value > limit[length]
-+ comparison. */
-+ limit[i] = (pp << (maxLen - i)) - 1;
-+ pp <<= 1;
-+ base[i+1] = pp-(t += temp[i]);
-+ }
-+ limit[maxLen+1] = INT_MAX; /* Sentinal value for
-+ * reading next sym. */
-+ limit[maxLen] = pp+temp[maxLen]-1;
-+ base[minLen] = 0;
-+ }
-+ /* We've finished reading and digesting the block header. Now
-+ read this block's Huffman coded symbols from the file and
-+ undo the Huffman coding and run length encoding, saving the
-+ result into dbuf[dbufCount++] = uc */
-+
-+ /* Initialize symbol occurrence counters and symbol Move To
-+ * Front table */
-+ for (i = 0; i < 256; i++) {
-+ byteCount[i] = 0;
-+ mtfSymbol[i] = (unsigned char)i;
-+ }
-+ /* Loop through compressed symbols. */
-+ runPos = dbufCount = symCount = selector = 0;
-+ for (;;) {
-+ /* Determine which Huffman coding group to use. */
-+ if (!(symCount--)) {
-+ symCount = GROUP_SIZE-1;
-+ if (selector >= nSelectors)
-+ return RETVAL_DATA_ERROR;
-+ hufGroup = bd->groups+selectors[selector++];
-+ base = hufGroup->base-1;
-+ limit = hufGroup->limit-1;
-+ }
-+ /* Read next Huffman-coded symbol. */
-+ /* Note: It is far cheaper to read maxLen bits and
-+ back up than it is to read minLen bits and then an
-+ additional bit at a time, testing as we go.
-+ Because there is a trailing last block (with file
-+ CRC), there is no danger of the overread causing an
-+ unexpected EOF for a valid compressed file. As a
-+ further optimization, we do the read inline
-+ (falling back to a call to get_bits if the buffer
-+ runs dry). The following (up to got_huff_bits:) is
-+ equivalent to j = get_bits(bd, hufGroup->maxLen);
-+ */
-+ while (bd->inbufBitCount < hufGroup->maxLen) {
-+ if (bd->inbufPos == bd->inbufCount) {
-+ j = get_bits(bd, hufGroup->maxLen);
-+ goto got_huff_bits;
-+ }
-+ bd->inbufBits =
-+ (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
-+ bd->inbufBitCount += 8;
-+ };
-+ bd->inbufBitCount -= hufGroup->maxLen;
-+ j = (bd->inbufBits >> bd->inbufBitCount)&
-+ ((1 << hufGroup->maxLen)-1);
-+got_huff_bits:
-+ /* Figure how how many bits are in next symbol and
-+ * unget extras */
-+ i = hufGroup->minLen;
-+ while (j > limit[i])
-+ ++i;
-+ bd->inbufBitCount += (hufGroup->maxLen - i);
-+ /* Huffman decode value to get nextSym (with bounds checking) */
-+ if ((i > hufGroup->maxLen)
-+ || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i]))
-+ >= MAX_SYMBOLS))
-+ return RETVAL_DATA_ERROR;
-+ nextSym = hufGroup->permute[j];
-+ /* We have now decoded the symbol, which indicates
-+ either a new literal byte, or a repeated run of the
-+ most recent literal byte. First, check if nextSym
-+ indicates a repeated run, and if so loop collecting
-+ how many times to repeat the last literal. */
-+ if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */
-+ /* If this is the start of a new run, zero out
-+ * counter */
-+ if (!runPos) {
-+ runPos = 1;
-+ t = 0;
-+ }
-+ /* Neat trick that saves 1 symbol: instead of
-+ or-ing 0 or 1 at each bit position, add 1
-+ or 2 instead. For example, 1011 is 1 << 0
-+ + 1 << 1 + 2 << 2. 1010 is 2 << 0 + 2 << 1
-+ + 1 << 2. You can make any bit pattern
-+ that way using 1 less symbol than the basic
-+ or 0/1 method (except all bits 0, which
-+ would use no symbols, but a run of length 0
-+ doesn't mean anything in this context).
-+ Thus space is saved. */
-+ t += (runPos << nextSym);
-+ /* +runPos if RUNA; +2*runPos if RUNB */
-+
-+ runPos <<= 1;
-+ continue;
-+ }
-+ /* When we hit the first non-run symbol after a run,
-+ we now know how many times to repeat the last
-+ literal, so append that many copies to our buffer
-+ of decoded symbols (dbuf) now. (The last literal
-+ used is the one at the head of the mtfSymbol
-+ array.) */
-+ if (runPos) {
-+ runPos = 0;
-+ if (dbufCount+t >= dbufSize)
-+ return RETVAL_DATA_ERROR;
-+
-+ uc = symToByte[mtfSymbol[0]];
-+ byteCount[uc] += t;
-+ while (t--)
-+ dbuf[dbufCount++] = uc;
-+ }
-+ /* Is this the terminating symbol? */
-+ if (nextSym > symTotal)
-+ break;
-+ /* At this point, nextSym indicates a new literal
-+ character. Subtract one to get the position in the
-+ MTF array at which this literal is currently to be
-+ found. (Note that the result can't be -1 or 0,
-+ because 0 and 1 are RUNA and RUNB. But another
-+ instance of the first symbol in the mtf array,
-+ position 0, would have been handled as part of a
-+ run above. Therefore 1 unused mtf position minus 2
-+ non-literal nextSym values equals -1.) */
-+ if (dbufCount >= dbufSize)
-+ return RETVAL_DATA_ERROR;
-+ i = nextSym - 1;
-+ uc = mtfSymbol[i];
-+ /* Adjust the MTF array. Since we typically expect to
-+ *move only a small number of symbols, and are bound
-+ *by 256 in any case, using memmove here would
-+ *typically be bigger and slower due to function call
-+ *overhead and other assorted setup costs. */
-+ do {
-+ mtfSymbol[i] = mtfSymbol[i-1];
-+ } while (--i);
-+ mtfSymbol[0] = uc;
-+ uc = symToByte[uc];
-+ /* We have our literal byte. Save it into dbuf. */
-+ byteCount[uc]++;
-+ dbuf[dbufCount++] = (unsigned int)uc;
-+ }
-+ /* At this point, we've read all the Huffman-coded symbols
-+ (and repeated runs) for this block from the input stream,
-+ and decoded them into the intermediate buffer. There are
-+ dbufCount many decoded bytes in dbuf[]. Now undo the
-+ Burrows-Wheeler transform on dbuf. See
-+ http://dogma.net/markn/articles/bwt/bwt.htm
-+ */
-+ /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */
-+ j = 0;
-+ for (i = 0; i < 256; i++) {
-+ k = j+byteCount[i];
-+ byteCount[i] = j;
-+ j = k;
-+ }
-+ /* Figure out what order dbuf would be in if we sorted it. */
-+ for (i = 0; i < dbufCount; i++) {
-+ uc = (unsigned char)(dbuf[i] & 0xff);
-+ dbuf[byteCount[uc]] |= (i << 8);
-+ byteCount[uc]++;
-+ }
-+ /* Decode first byte by hand to initialize "previous" byte.
-+ Note that it doesn't get output, and if the first three
-+ characters are identical it doesn't qualify as a run (hence
-+ writeRunCountdown = 5). */
-+ if (dbufCount) {
-+ if (origPtr >= dbufCount)
-+ return RETVAL_DATA_ERROR;
-+ bd->writePos = dbuf[origPtr];
-+ bd->writeCurrent = (unsigned char)(bd->writePos&0xff);
-+ bd->writePos >>= 8;
-+ bd->writeRunCountdown = 5;
-+ }
-+ bd->writeCount = dbufCount;
-+
-+ return RETVAL_OK;
-+}
-+
-+/* Undo burrows-wheeler transform on intermediate buffer to produce output.
-+ If start_bunzip was initialized with out_fd =-1, then up to len bytes of
-+ data are written to outbuf. Return value is number of bytes written or
-+ error (all errors are negative numbers). If out_fd!=-1, outbuf and len
-+ are ignored, data is written to out_fd and return is RETVAL_OK or error.
-+*/
-+
-+static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len)
-+{
-+ const unsigned int *dbuf;
-+ int pos, xcurrent, previous, gotcount;
-+
-+ /* If last read was short due to end of file, return last block now */
-+ if (bd->writeCount < 0)
-+ return bd->writeCount;
-+
-+ gotcount = 0;
-+ dbuf = bd->dbuf;
-+ pos = bd->writePos;
-+ xcurrent = bd->writeCurrent;
-+
-+ /* We will always have pending decoded data to write into the output
-+ buffer unless this is the very first call (in which case we haven't
-+ Huffman-decoded a block into the intermediate buffer yet). */
-+
-+ if (bd->writeCopies) {
-+ /* Inside the loop, writeCopies means extra copies (beyond 1) */
-+ --bd->writeCopies;
-+ /* Loop outputting bytes */
-+ for (;;) {
-+ /* If the output buffer is full, snapshot
-+ * state and return */
-+ if (gotcount >= len) {
-+ bd->writePos = pos;
-+ bd->writeCurrent = xcurrent;
-+ bd->writeCopies++;
-+ return len;
-+ }
-+ /* Write next byte into output buffer, updating CRC */
-+ outbuf[gotcount++] = xcurrent;
-+ bd->writeCRC = (((bd->writeCRC) << 8)
-+ ^bd->crc32Table[((bd->writeCRC) >> 24)
-+ ^xcurrent]);
-+ /* Loop now if we're outputting multiple
-+ * copies of this byte */
-+ if (bd->writeCopies) {
-+ --bd->writeCopies;
-+ continue;
-+ }
-+decode_next_byte:
-+ if (!bd->writeCount--)
-+ break;
-+ /* Follow sequence vector to undo
-+ * Burrows-Wheeler transform */
-+ previous = xcurrent;
-+ pos = dbuf[pos];
-+ xcurrent = pos&0xff;
-+ pos >>= 8;
-+ /* After 3 consecutive copies of the same
-+ byte, the 4th is a repeat count. We count
-+ down from 4 instead *of counting up because
-+ testing for non-zero is faster */
-+ if (--bd->writeRunCountdown) {
-+ if (xcurrent != previous)
-+ bd->writeRunCountdown = 4;
-+ } else {
-+ /* We have a repeated run, this byte
-+ * indicates the count */
-+ bd->writeCopies = xcurrent;
-+ xcurrent = previous;
-+ bd->writeRunCountdown = 5;
-+ /* Sometimes there are just 3 bytes
-+ * (run length 0) */
-+ if (!bd->writeCopies)
-+ goto decode_next_byte;
-+ /* Subtract the 1 copy we'd output
-+ * anyway to get extras */
-+ --bd->writeCopies;
-+ }
-+ }
-+ /* Decompression of this block completed successfully */
-+ bd->writeCRC = ~bd->writeCRC;
-+ bd->totalCRC = ((bd->totalCRC << 1) |
-+ (bd->totalCRC >> 31)) ^ bd->writeCRC;
-+ /* If this block had a CRC error, force file level CRC error. */
-+ if (bd->writeCRC != bd->headerCRC) {
-+ bd->totalCRC = bd->headerCRC+1;
-+ return RETVAL_LAST_BLOCK;
-+ }
-+ }
-+
-+ /* Refill the intermediate buffer by Huffman-decoding next
-+ * block of input */
-+ /* (previous is just a convenient unused temp variable here) */
-+ previous = get_next_block(bd);
-+ if (previous) {
-+ bd->writeCount = previous;
-+ return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount;
-+ }
-+ bd->writeCRC = 0xffffffffUL;
-+ pos = bd->writePos;
-+ xcurrent = bd->writeCurrent;
-+ goto decode_next_byte;
-+}
-+
-+static int INIT nofill(void *buf, unsigned int len)
-+{
-+ return -1;
-+}
-+
-+/* Allocate the structure, read file header. If in_fd ==-1, inbuf must contain
-+ a complete bunzip file (len bytes long). If in_fd!=-1, inbuf and len are
-+ ignored, and data is read from file handle into temporary buffer. */
-+static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len,
-+ int (*fill)(void*, unsigned int))
-+{
-+ struct bunzip_data *bd;
-+ unsigned int i, j, c;
-+ const unsigned int BZh0 =
-+ (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16)
-+ +(((unsigned int)'h') << 8)+(unsigned int)'0';
-+
-+ /* Figure out how much data to allocate */
-+ i = sizeof(struct bunzip_data);
-+
-+ /* Allocate bunzip_data. Most fields initialize to zero. */
-+ bd = *bdp = malloc(i);
-+ memset(bd, 0, sizeof(struct bunzip_data));
-+ /* Setup input buffer */
-+ bd->inbuf = inbuf;
-+ bd->inbufCount = len;
-+ if (fill != NULL)
-+ bd->fill = fill;
-+ else
-+ bd->fill = nofill;
-+
-+ /* Init the CRC32 table (big endian) */
-+ for (i = 0; i < 256; i++) {
-+ c = i << 24;
-+ for (j = 8; j; j--)
-+ c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1);
-+ bd->crc32Table[i] = c;
-+ }
-+
-+ /* Ensure that file starts with "BZh['1'-'9']." */
-+ i = get_bits(bd, 32);
-+ if (((unsigned int)(i-BZh0-1)) >= 9)
-+ return RETVAL_NOT_BZIP_DATA;
-+
-+ /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of
-+ uncompressed data. Allocate intermediate buffer for block. */
-+ bd->dbufSize = 100000*(i-BZh0);
-+
-+ bd->dbuf = large_malloc(bd->dbufSize * sizeof(int));
-+ return RETVAL_OK;
-+}
-+
-+/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip2 data,
-+ not end of file.) */
-+STATIC int INIT bunzip2(unsigned char *buf, int len,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *outbuf,
-+ int *pos,
-+ void(*error_fn)(char *x))
-+{
-+ struct bunzip_data *bd;
-+ int i = -1;
-+ unsigned char *inbuf;
-+
-+ set_error_fn(error_fn);
-+ if (flush)
-+ outbuf = malloc(BZIP2_IOBUF_SIZE);
-+ else
-+ len -= 4; /* Uncompressed size hack active in pre-boot
-+ environment */
-+ if (!outbuf) {
-+ error("Could not allocate output bufer");
-+ return -1;
-+ }
-+ if (buf)
-+ inbuf = buf;
-+ else
-+ inbuf = malloc(BZIP2_IOBUF_SIZE);
-+ if (!inbuf) {
-+ error("Could not allocate input bufer");
-+ goto exit_0;
-+ }
-+ i = start_bunzip(&bd, inbuf, len, fill);
-+ if (!i) {
-+ for (;;) {
-+ i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE);
-+ if (i <= 0)
-+ break;
-+ if (!flush)
-+ outbuf += i;
-+ else
-+ if (i != flush(outbuf, i)) {
-+ i = RETVAL_UNEXPECTED_OUTPUT_EOF;
-+ break;
-+ }
-+ }
-+ }
-+ /* Check CRC and release memory */
-+ if (i == RETVAL_LAST_BLOCK) {
-+ if (bd->headerCRC != bd->totalCRC)
-+ error("Data integrity error when decompressing.");
-+ else
-+ i = RETVAL_OK;
-+ } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) {
-+ error("Compressed file ends unexpectedly");
-+ }
-+ if (bd->dbuf)
-+ large_free(bd->dbuf);
-+ if (pos)
-+ *pos = bd->inbufPos;
-+ free(bd);
-+ if (!buf)
-+ free(inbuf);
-+exit_0:
-+ if (flush)
-+ free(outbuf);
-+ return i;
-+}
-+
-+#define decompress bunzip2
-diff -purN linux-2.6.27.6/lib/decompress_unlzma.c linux-2.6.27.6udpcast/lib/decompress_unlzma.c
---- linux-2.6.27.6/lib/decompress_unlzma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/lib/decompress_unlzma.c 2008-11-16 23:40:21.000000000 +0100
-@@ -0,0 +1,647 @@
-+/* Lzma decompressor for Linux kernel. Shamelessly snarfed
-+ *from busybox 1.1.1
-+ *
-+ *Linux kernel adaptation
-+ *Copyright (C) 2006 Alain < alain@knaff.lu >
-+ *
-+ *Based on small lzma deflate implementation/Small range coder
-+ *implementation for lzma.
-+ *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
-+ *
-+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
-+ *Copyright (C) 1999-2005 Igor Pavlov
-+ *
-+ *Copyrights of the parts, see headers below.
-+ *
-+ *
-+ *This program is free software; you can redistribute it and/or
-+ *modify it under the terms of the GNU Lesser General Public
-+ *License as published by the Free Software Foundation; either
-+ *version 2.1 of the License, or (at your option) any later version.
-+ *
-+ *This program is distributed in the hope that it will be useful,
-+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ *Lesser General Public License for more details.
-+ *
-+ *You should have received a copy of the GNU Lesser General Public
-+ *License along with this library; if not, write to the Free Software
-+ *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ */
-+
-+#ifndef STATIC
-+#include <linux/decompress/unlzma.h>
-+#endif /* STATIC */
-+
-+#include <linux/decompress/mm.h>
-+
-+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-+
-+static long long INIT read_int(unsigned char *ptr, int size)
-+{
-+ int i;
-+ long long ret = 0;
-+
-+ for (i = 0; i < size; i++)
-+ ret = (ret << 8) | ptr[size-i-1];
-+ return ret;
-+}
-+
-+#define ENDIAN_CONVERT(x) \
-+ x = (typeof(x))read_int((unsigned char *)&x, sizeof(x))
-+
-+
-+/* Small range coder implementation for lzma.
-+ *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
-+ *
-+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
-+ *Copyright (c) 1999-2005 Igor Pavlov
-+ */
-+
-+#include <linux/compiler.h>
-+
-+#define LZMA_IOBUF_SIZE 0x10000
-+
-+struct rc {
-+ int (*fill)(void*, unsigned int);
-+ uint8_t *ptr;
-+ uint8_t *buffer;
-+ uint8_t *buffer_end;
-+ int buffer_size;
-+ uint32_t code;
-+ uint32_t range;
-+ uint32_t bound;
-+};
-+
-+
-+#define RC_TOP_BITS 24
-+#define RC_MOVE_BITS 5
-+#define RC_MODEL_TOTAL_BITS 11
-+
-+
-+/* Called twice: once at startup and once in rc_normalize() */
-+static void INIT rc_read(struct rc *rc)
-+{
-+ rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE);
-+ if (rc->buffer_size <= 0)
-+ error("unexpected EOF");
-+ rc->ptr = rc->buffer;
-+ rc->buffer_end = rc->buffer + rc->buffer_size;
-+}
-+
-+/* Called once */
-+static inline void INIT rc_init(struct rc *rc,
-+ int (*fill)(void*, unsigned int),
-+ char *buffer, int buffer_size)
-+{
-+ rc->fill = fill;
-+ rc->buffer = (uint8_t *)buffer;
-+ rc->buffer_size = buffer_size;
-+ rc->buffer_end = rc->buffer + rc->buffer_size;
-+ rc->ptr = rc->buffer;
-+
-+ rc->code = 0;
-+ rc->range = 0xFFFFFFFF;
-+}
-+
-+static inline void INIT rc_init_code(struct rc *rc)
-+{
-+ int i;
-+
-+ for (i = 0; i < 5; i++) {
-+ if (rc->ptr >= rc->buffer_end)
-+ rc_read(rc);
-+ rc->code = (rc->code << 8) | *rc->ptr++;
-+ }
-+}
-+
-+
-+/* Called once. TODO: bb_maybe_free() */
-+static inline void INIT rc_free(struct rc *rc)
-+{
-+ free(rc->buffer);
-+}
-+
-+/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */
-+static void INIT rc_do_normalize(struct rc *rc)
-+{
-+ if (rc->ptr >= rc->buffer_end)
-+ rc_read(rc);
-+ rc->range <<= 8;
-+ rc->code = (rc->code << 8) | *rc->ptr++;
-+}
-+static inline void INIT rc_normalize(struct rc *rc)
-+{
-+ if (rc->range < (1 << RC_TOP_BITS))
-+ rc_do_normalize(rc);
-+}
-+
-+/* Called 9 times */
-+/* Why rc_is_bit_0_helper exists?
-+ *Because we want to always expose (rc->code < rc->bound) to optimizer
-+ */
-+static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p)
-+{
-+ rc_normalize(rc);
-+ rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS);
-+ return rc->bound;
-+}
-+static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p)
-+{
-+ uint32_t t = rc_is_bit_0_helper(rc, p);
-+ return rc->code < t;
-+}
-+
-+/* Called ~10 times, but very small, thus inlined */
-+static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p)
-+{
-+ rc->range = rc->bound;
-+ *p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
-+}
-+static inline void rc_update_bit_1(struct rc *rc, uint16_t *p)
-+{
-+ rc->range -= rc->bound;
-+ rc->code -= rc->bound;
-+ *p -= *p >> RC_MOVE_BITS;
-+}
-+
-+/* Called 4 times in unlzma loop */
-+static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol)
-+{
-+ if (rc_is_bit_0(rc, p)) {
-+ rc_update_bit_0(rc, p);
-+ *symbol *= 2;
-+ return 0;
-+ } else {
-+ rc_update_bit_1(rc, p);
-+ *symbol = *symbol * 2 + 1;
-+ return 1;
-+ }
-+}
-+
-+/* Called once */
-+static inline int INIT rc_direct_bit(struct rc *rc)
-+{
-+ rc_normalize(rc);
-+ rc->range >>= 1;
-+ if (rc->code >= rc->range) {
-+ rc->code -= rc->range;
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+/* Called twice */
-+static inline void INIT
-+rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol)
-+{
-+ int i = num_levels;
-+
-+ *symbol = 1;
-+ while (i--)
-+ rc_get_bit(rc, p + *symbol, symbol);
-+ *symbol -= 1 << num_levels;
-+}
-+
-+
-+/*
-+ * Small lzma deflate implementation.
-+ * Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
-+ *
-+ * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
-+ * Copyright (C) 1999-2005 Igor Pavlov
-+ */
-+
-+
-+struct lzma_header {
-+ uint8_t pos;
-+ uint32_t dict_size;
-+ uint64_t dst_size;
-+} __attribute__ ((packed)) ;
-+
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LZMA_NUM_POS_BITS_MAX 4
-+
-+#define LZMA_LEN_NUM_LOW_BITS 3
-+#define LZMA_LEN_NUM_MID_BITS 3
-+#define LZMA_LEN_NUM_HIGH_BITS 8
-+
-+#define LZMA_LEN_CHOICE 0
-+#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1)
-+#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1)
-+#define LZMA_LEN_MID (LZMA_LEN_LOW \
-+ + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS)))
-+#define LZMA_LEN_HIGH (LZMA_LEN_MID \
-+ +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS)))
-+#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS))
-+
-+#define LZMA_NUM_STATES 12
-+#define LZMA_NUM_LIT_STATES 7
-+
-+#define LZMA_START_POS_MODEL_INDEX 4
-+#define LZMA_END_POS_MODEL_INDEX 14
-+#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1))
-+
-+#define LZMA_NUM_POS_SLOT_BITS 6
-+#define LZMA_NUM_LEN_TO_POS_STATES 4
-+
-+#define LZMA_NUM_ALIGN_BITS 4
-+
-+#define LZMA_MATCH_MIN_LEN 2
-+
-+#define LZMA_IS_MATCH 0
-+#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
-+#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES)
-+#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES)
-+#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES)
-+#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES)
-+#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \
-+ + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
-+#define LZMA_SPEC_POS (LZMA_POS_SLOT \
-+ +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS))
-+#define LZMA_ALIGN (LZMA_SPEC_POS \
-+ + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX)
-+#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS))
-+#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS)
-+#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS)
-+
-+
-+struct writer {
-+ uint8_t *buffer;
-+ uint8_t previous_byte;
-+ size_t buffer_pos;
-+ int bufsize;
-+ size_t global_pos;
-+ int(*flush)(void*, unsigned int);
-+ struct lzma_header *header;
-+};
-+
-+struct cstate {
-+ int state;
-+ uint32_t rep0, rep1, rep2, rep3;
-+};
-+
-+static inline size_t INIT get_pos(struct writer *wr)
-+{
-+ return
-+ wr->global_pos + wr->buffer_pos;
-+}
-+
-+static inline uint8_t INIT peek_old_byte(struct writer *wr,
-+ uint32_t offs)
-+{
-+ if (!wr->flush) {
-+ int32_t pos;
-+ while (offs > wr->header->dict_size)
-+ offs -= wr->header->dict_size;
-+ pos = wr->buffer_pos - offs;
-+ return wr->buffer[pos];
-+ } else {
-+ uint32_t pos = wr->buffer_pos - offs;
-+ while (pos >= wr->header->dict_size)
-+ pos += wr->header->dict_size;
-+ return wr->buffer[pos];
-+ }
-+
-+}
-+
-+static inline void INIT write_byte(struct writer *wr, uint8_t byte)
-+{
-+ wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte;
-+ if (wr->flush && wr->buffer_pos == wr->header->dict_size) {
-+ wr->buffer_pos = 0;
-+ wr->global_pos += wr->header->dict_size;
-+ wr->flush((char *)wr->buffer, wr->header->dict_size);
-+ }
-+}
-+
-+
-+static inline void INIT copy_byte(struct writer *wr, uint32_t offs)
-+{
-+ write_byte(wr, peek_old_byte(wr, offs));
-+}
-+
-+static inline void INIT copy_bytes(struct writer *wr,
-+ uint32_t rep0, int len)
-+{
-+ do {
-+ copy_byte(wr, rep0);
-+ len--;
-+ } while (len != 0 && wr->buffer_pos < wr->header->dst_size);
-+}
-+
-+static inline void INIT process_bit0(struct writer *wr, struct rc *rc,
-+ struct cstate *cst, uint16_t *p,
-+ int pos_state, uint16_t *prob,
-+ int lc, uint32_t literal_pos_mask) {
-+ int mi = 1;
-+ rc_update_bit_0(rc, prob);
-+ prob = (p + LZMA_LITERAL +
-+ (LZMA_LIT_SIZE
-+ * (((get_pos(wr) & literal_pos_mask) << lc)
-+ + (wr->previous_byte >> (8 - lc))))
-+ );
-+
-+ if (cst->state >= LZMA_NUM_LIT_STATES) {
-+ int match_byte = peek_old_byte(wr, cst->rep0);
-+ do {
-+ int bit;
-+ uint16_t *prob_lit;
-+
-+ match_byte <<= 1;
-+ bit = match_byte & 0x100;
-+ prob_lit = prob + 0x100 + bit + mi;
-+ if (rc_get_bit(rc, prob_lit, &mi)) {
-+ if (!bit)
-+ break;
-+ } else {
-+ if (bit)
-+ break;
-+ }
-+ } while (mi < 0x100);
-+ }
-+ while (mi < 0x100) {
-+ uint16_t *prob_lit = prob + mi;
-+ rc_get_bit(rc, prob_lit, &mi);
-+ }
-+ write_byte(wr, mi);
-+ if (cst->state < 4)
-+ cst->state = 0;
-+ else if (cst->state < 10)
-+ cst->state -= 3;
-+ else
-+ cst->state -= 6;
-+}
-+
-+static inline void INIT process_bit1(struct writer *wr, struct rc *rc,
-+ struct cstate *cst, uint16_t *p,
-+ int pos_state, uint16_t *prob) {
-+ int offset;
-+ uint16_t *prob_len;
-+ int num_bits;
-+ int len;
-+
-+ rc_update_bit_1(rc, prob);
-+ prob = p + LZMA_IS_REP + cst->state;
-+ if (rc_is_bit_0(rc, prob)) {
-+ rc_update_bit_0(rc, prob);
-+ cst->rep3 = cst->rep2;
-+ cst->rep2 = cst->rep1;
-+ cst->rep1 = cst->rep0;
-+ cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3;
-+ prob = p + LZMA_LEN_CODER;
-+ } else {
-+ rc_update_bit_1(rc, prob);
-+ prob = p + LZMA_IS_REP_G0 + cst->state;
-+ if (rc_is_bit_0(rc, prob)) {
-+ rc_update_bit_0(rc, prob);
-+ prob = (p + LZMA_IS_REP_0_LONG
-+ + (cst->state <<
-+ LZMA_NUM_POS_BITS_MAX) +
-+ pos_state);
-+ if (rc_is_bit_0(rc, prob)) {
-+ rc_update_bit_0(rc, prob);
-+
-+ cst->state = cst->state < LZMA_NUM_LIT_STATES ?
-+ 9 : 11;
-+ copy_byte(wr, cst->rep0);
-+ return;
-+ } else {
-+ rc_update_bit_1(rc, prob);
-+ }
-+ } else {
-+ uint32_t distance;
-+
-+ rc_update_bit_1(rc, prob);
-+ prob = p + LZMA_IS_REP_G1 + cst->state;
-+ if (rc_is_bit_0(rc, prob)) {
-+ rc_update_bit_0(rc, prob);
-+ distance = cst->rep1;
-+ } else {
-+ rc_update_bit_1(rc, prob);
-+ prob = p + LZMA_IS_REP_G2 + cst->state;
-+ if (rc_is_bit_0(rc, prob)) {
-+ rc_update_bit_0(rc, prob);
-+ distance = cst->rep2;
-+ } else {
-+ rc_update_bit_1(rc, prob);
-+ distance = cst->rep3;
-+ cst->rep3 = cst->rep2;
-+ }
-+ cst->rep2 = cst->rep1;
-+ }
-+ cst->rep1 = cst->rep0;
-+ cst->rep0 = distance;
-+ }
-+ cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11;
-+ prob = p + LZMA_REP_LEN_CODER;
-+ }
-+
-+ prob_len = prob + LZMA_LEN_CHOICE;
-+ if (rc_is_bit_0(rc, prob_len)) {
-+ rc_update_bit_0(rc, prob_len);
-+ prob_len = (prob + LZMA_LEN_LOW
-+ + (pos_state <<
-+ LZMA_LEN_NUM_LOW_BITS));
-+ offset = 0;
-+ num_bits = LZMA_LEN_NUM_LOW_BITS;
-+ } else {
-+ rc_update_bit_1(rc, prob_len);
-+ prob_len = prob + LZMA_LEN_CHOICE_2;
-+ if (rc_is_bit_0(rc, prob_len)) {
-+ rc_update_bit_0(rc, prob_len);
-+ prob_len = (prob + LZMA_LEN_MID
-+ + (pos_state <<
-+ LZMA_LEN_NUM_MID_BITS));
-+ offset = 1 << LZMA_LEN_NUM_LOW_BITS;
-+ num_bits = LZMA_LEN_NUM_MID_BITS;
-+ } else {
-+ rc_update_bit_1(rc, prob_len);
-+ prob_len = prob + LZMA_LEN_HIGH;
-+ offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
-+ + (1 << LZMA_LEN_NUM_MID_BITS));
-+ num_bits = LZMA_LEN_NUM_HIGH_BITS;
-+ }
-+ }
-+
-+ rc_bit_tree_decode(rc, prob_len, num_bits, &len);
-+ len += offset;
-+
-+ if (cst->state < 4) {
-+ int pos_slot;
-+
-+ cst->state += LZMA_NUM_LIT_STATES;
-+ prob =
-+ p + LZMA_POS_SLOT +
-+ ((len <
-+ LZMA_NUM_LEN_TO_POS_STATES ? len :
-+ LZMA_NUM_LEN_TO_POS_STATES - 1)
-+ << LZMA_NUM_POS_SLOT_BITS);
-+ rc_bit_tree_decode(rc, prob,
-+ LZMA_NUM_POS_SLOT_BITS,
-+ &pos_slot);
-+ if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
-+ int i, mi;
-+ num_bits = (pos_slot >> 1) - 1;
-+ cst->rep0 = 2 | (pos_slot & 1);
-+ if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
-+ cst->rep0 <<= num_bits;
-+ prob = p + LZMA_SPEC_POS +
-+ cst->rep0 - pos_slot - 1;
-+ } else {
-+ num_bits -= LZMA_NUM_ALIGN_BITS;
-+ while (num_bits--)
-+ cst->rep0 = (cst->rep0 << 1) |
-+ rc_direct_bit(rc);
-+ prob = p + LZMA_ALIGN;
-+ cst->rep0 <<= LZMA_NUM_ALIGN_BITS;
-+ num_bits = LZMA_NUM_ALIGN_BITS;
-+ }
-+ i = 1;
-+ mi = 1;
-+ while (num_bits--) {
-+ if (rc_get_bit(rc, prob + mi, &mi))
-+ cst->rep0 |= i;
-+ i <<= 1;
-+ }
-+ } else
-+ cst->rep0 = pos_slot;
-+ if (++(cst->rep0) == 0)
-+ return;
-+ }
-+
-+ len += LZMA_MATCH_MIN_LEN;
-+
-+ copy_bytes(wr, cst->rep0, len);
-+}
-+
-+
-+
-+STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *output,
-+ int *posp,
-+ void(*error_fn)(char *x)
-+ )
-+{
-+ struct lzma_header header;
-+ int lc, pb, lp;
-+ uint32_t pos_state_mask;
-+ uint32_t literal_pos_mask;
-+ uint16_t *p;
-+ int num_probs;
-+ struct rc rc;
-+ int i, mi;
-+ struct writer wr;
-+ struct cstate cst;
-+ unsigned char *inbuf;
-+ int ret = -1;
-+
-+ set_error_fn(error_fn);
-+ if (!flush)
-+ in_len -= 4; /* Uncompressed size hack active in pre-boot
-+ environment */
-+ if (buf)
-+ inbuf = buf;
-+ else
-+ inbuf = malloc(LZMA_IOBUF_SIZE);
-+ if (!inbuf) {
-+ error("Could not allocate input bufer");
-+ goto exit_0;
-+ }
-+
-+ cst.state = 0;
-+ cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1;
-+
-+ wr.header = &header;
-+ wr.flush = flush;
-+ wr.global_pos = 0;
-+ wr.previous_byte = 0;
-+ wr.buffer_pos = 0;
-+
-+ rc_init(&rc, fill, inbuf, in_len);
-+
-+ for (i = 0; i < sizeof(header); i++) {
-+ if (rc.ptr >= rc.buffer_end)
-+ rc_read(&rc);
-+ ((unsigned char *)&header)[i] = *rc.ptr++;
-+ }
-+
-+ if (header.pos >= (9 * 5 * 5))
-+ error("bad header");
-+
-+ mi = 0;
-+ lc = header.pos;
-+ while (lc >= 9) {
-+ mi++;
-+ lc -= 9;
-+ }
-+ pb = 0;
-+ lp = mi;
-+ while (lp >= 5) {
-+ pb++;
-+ lp -= 5;
-+ }
-+ pos_state_mask = (1 << pb) - 1;
-+ literal_pos_mask = (1 << lp) - 1;
-+
-+ ENDIAN_CONVERT(header.dict_size);
-+ ENDIAN_CONVERT(header.dst_size);
-+
-+ if (header.dict_size == 0)
-+ header.dict_size = 1;
-+
-+ if (output)
-+ wr.buffer = output;
-+ else {
-+ wr.bufsize = MIN(header.dst_size, header.dict_size);
-+ wr.buffer = large_malloc(wr.bufsize);
-+ }
-+ if (wr.buffer == NULL)
-+ goto exit_1;
-+
-+ num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp));
-+ p = (uint16_t *) large_malloc(num_probs * sizeof(*p));
-+ if (p == 0)
-+ goto exit_2;
-+ num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp));
-+ for (i = 0; i < num_probs; i++)
-+ p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
-+
-+ rc_init_code(&rc);
-+
-+ while (get_pos(&wr) < header.dst_size) {
-+ int pos_state = get_pos(&wr) & pos_state_mask;
-+ uint16_t *prob = p + LZMA_IS_MATCH +
-+ (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state;
-+ if (rc_is_bit_0(&rc, prob))
-+ process_bit0(&wr, &rc, &cst, p, pos_state, prob,
-+ lc, literal_pos_mask);
-+ else {
-+ process_bit1(&wr, &rc, &cst, p, pos_state, prob);
-+ if (cst.rep0 == 0)
-+ break;
-+ }
-+ }
-+
-+ if (posp)
-+ *posp = rc.ptr-rc.buffer;
-+ if (wr.flush)
-+ wr.flush(wr.buffer, wr.buffer_pos);
-+ ret = 0;
-+ large_free(p);
-+exit_2:
-+ if (!output)
-+ large_free(wr.buffer);
-+exit_1:
-+ if (!buf)
-+ free(inbuf);
-+exit_0:
-+ return ret;
-+}
-+
-+#define decompress unlzma
-diff -purN linux-2.6.27.6/lib/inflate.c linux-2.6.27.6udpcast/lib/inflate.c
---- linux-2.6.27.6/lib/inflate.c 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/lib/inflate.c 2008-11-16 23:02:55.000000000 +0100
-@@ -109,20 +109,78 @@ static char rcsid[] = "#Id: inflate.c,v
- #endif
-
- #ifndef STATIC
-+#include <linux/decompress/inflate.h>
-+#endif /* ! STATIC */
-
--#if defined(STDC_HEADERS) || defined(HAVE_STDLIB_H)
--# include <sys/types.h>
--# include <stdlib.h>
-+#include <linux/decompress/mm.h>
-+
-+#include <linux/string.h>
-+
-+#ifdef NEW_CODE
-+static int(*flush_cb)(void*, unsigned int);
-+static int(*fill_cb)(void*, unsigned int);
-+
-+/* Begin stuff copied from initramfs */
-+/*
-+ * gzip declarations
-+ */
-+
-+#define OF(args) args
-+
-+#ifndef memzero
-+#define memzero(s, n) memset((s), 0, (n))
- #endif
-
--#include "gzip.h"
--#define STATIC
--#endif /* !STATIC */
-+#define INBUFSIZ 4096
-+
-+#define WSIZE 0x8000 /* window size--must be a power of two, and */
-+ /* at least 32K for zip's deflate method */
-+
-+static uint8_t *inbuf;
-+static uint8_t *window;
-+
-+static unsigned insize; /* valid bytes in inbuf */
-+static unsigned outcnt; /* bytes in output buffer */
-+static long bytes_out;
-+
-+/* --- */
-+
-+static unsigned inptr; /* index of next byte to be processed in inbuf */
-+
-+/* --- */
-+
-+/* ===========================================================================
-+ * Fill the input buffer. This is called only when the buffer is empty
-+ * and at least one byte is really needed.
-+ * Returning -1 does not guarantee that gunzip() will ever return.
-+ */
-+static int INIT fill_inbuf(void)
-+{
-+ insize = fill_cb(inbuf, INBUFSIZ);
-+ if (insize <= 0) {
-+ error("RAMDISK: ran out of compressed data");
-+ return -1;
-+ }
-+
-+ inptr = 1;
-+
-+ return inbuf[0];
-+}
-+
-+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-+
-+/* Diagnostic functions (stubbed out) */
-+#define Assert(cond, msg)
-+#define Trace(x)
-+#define Tracev(x)
-+#define Tracevv(x)
-+#define Tracec(c, x)
-+#define Tracecv(c, x)
-
--#ifndef INIT
--#define INIT
-+static void flush_window(void);
-+/* End stuff copied from initramfs */
- #endif
--
-+
- #define slide window
-
- /* Huffman code lookup table entry--this entry is four bytes for machines
-@@ -133,10 +191,10 @@ static char rcsid[] = "#Id: inflate.c,v
- an unused code. If a code with e == 99 is looked up, this implies an
- error in the data. */
- struct huft {
-- uch e; /* number of extra bits or operation */
-- uch b; /* number of bits in this code or subcode */
-+ uint8_t e; /* number of extra bits or operation */
-+ uint8_t b; /* number of bits in this code or subcode */
- union {
-- ush n; /* literal, length base, or distance base */
-+ uint16_t n; /* literal, length base, or distance base */
- struct huft *t; /* pointer to next level of table */
- } v;
- };
-@@ -144,7 +202,7 @@ struct huft {
-
- /* Function prototypes */
- STATIC int INIT huft_build OF((unsigned *, unsigned, unsigned,
-- const ush *, const ush *, struct huft **, int *));
-+ const uint16_t *, const uint16_t *, struct huft **, int *));
- STATIC int INIT huft_free OF((struct huft *));
- STATIC int INIT inflate_codes OF((struct huft *, struct huft *, int, int));
- STATIC int INIT inflate_stored OF((void));
-@@ -159,28 +217,28 @@ STATIC int INIT inflate OF((void));
- circular buffer. The index is updated simply by incrementing and then
- ANDing with 0x7fff (32K-1). */
- /* It is left to other modules to supply the 32 K area. It is assumed
-- to be usable as if it were declared "uch slide[32768];" or as just
-- "uch *slide;" and then malloc'ed in the latter case. The definition
-+ to be usable as if it were declared "uint8_t slide[32768];" or as just
-+ "uint8_t *slide;" and then malloc'ed in the latter case. The definition
- must be in unzip.h, included above. */
- /* unsigned wp; current position in slide */
- #define wp outcnt
- #define flush_output(w) (wp=(w),flush_window())
-
- /* Tables for deflate from PKZIP's appnote.txt. */
--static const unsigned border[] = { /* Order of the bit length code lengths */
-+static const unsigned border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
--static const ush cplens[] = { /* Copy lengths for literal codes 257..285 */
-+static const uint16_t cplens[] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* note: see note #13 above about the 258 in this list. */
--static const ush cplext[] = { /* Extra bits for literal codes 257..285 */
-+static const uint16_t cplext[] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */
--static const ush cpdist[] = { /* Copy offsets for distance codes 0..29 */
-+static const uint16_t cpdist[] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
--static const ush cpdext[] = { /* Extra bits for distance codes */
-+static const uint16_t cpdext[] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-@@ -217,59 +275,21 @@ static const ush cpdext[] = { /*
- the stream.
- */
-
--STATIC ulg bb; /* bit buffer */
-+STATIC uint32_t bb; /* bit buffer */
- STATIC unsigned bk; /* bits in bit buffer */
-
--STATIC const ush mask_bits[] = {
-+STATIC const uint16_t mask_bits[] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
- };
-
--#define NEXTBYTE() ({ int v = get_byte(); if (v < 0) goto underrun; (uch)v; })
--#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
-+#define NEXTBYTE() ({ int v = get_byte(); if (v < 0) goto underrun; \
-+ (uint8_t)v; })
-+#define NEEDBITS(n) {while (k < (n)) \
-+ {b |= ((uint32_t)NEXTBYTE())<<k; k += 8; } }
- #define DUMPBITS(n) {b>>=(n);k-=(n);}
-
--#ifndef NO_INFLATE_MALLOC
--/* A trivial malloc implementation, adapted from
-- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
-- */
--
--static unsigned long malloc_ptr;
--static int malloc_count;
--
--static void *malloc(int size)
--{
-- void *p;
--
-- if (size < 0)
-- error("Malloc error");
-- if (!malloc_ptr)
-- malloc_ptr = free_mem_ptr;
--
-- malloc_ptr = (malloc_ptr + 3) & ~3; /* Align */
--
-- p = (void *)malloc_ptr;
-- malloc_ptr += size;
--
-- if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
-- error("Out of memory");
--
-- malloc_count++;
-- return p;
--}
--
--static void free(void *where)
--{
-- malloc_count--;
-- if (!malloc_count)
-- malloc_ptr = free_mem_ptr;
--}
--#else
--#define malloc(a) kmalloc(a, GFP_KERNEL)
--#define free(a) kfree(a)
--#endif
--
- /*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
-@@ -307,7 +327,7 @@ STATIC const int lbits = 9; /*
- STATIC const int dbits = 6; /* bits in base distance lookup table */
-
-
--/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
-+/* If BMAX needs to be larger than 16, then h and x[] should be uint32_t. */
- #define BMAX 16 /* maximum bit length of any code (16 for explode) */
- #define N_MAX 288 /* maximum number of codes in any set */
-
-@@ -319,8 +339,8 @@ STATIC int INIT huft_build(
- unsigned *b, /* code lengths in bits (all assumed <= BMAX) */
- unsigned n, /* number of codes (assumed <= N_MAX) */
- unsigned s, /* number of simple-valued codes (0..s-1) */
-- const ush *d, /* list of base values for non-simple codes */
-- const ush *e, /* list of extra bits for non-simple codes */
-+ const uint16_t *d, /* list of base values for non-simple codes */
-+ const uint16_t *e, /* list of extra bits for non-simple codes */
- struct huft **t, /* result: starting table */
- int *m /* maximum lookup bits, returns actual */
- )
-@@ -500,8 +520,8 @@ DEBG1("5 ");
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
-- r.b = (uch)l; /* bits to dump before this table */
-- r.e = (uch)(16 + j); /* bits in this table */
-+ r.b = (uint8_t)l; /* bits to dump before this table */
-+ r.e = (uint8_t)(16 + j); /* bits in this table */
- r.v.t = q; /* pointer to this table */
- j = i >> (w - l); /* (get around Turbo C bug) */
- u[h-1][j] = r; /* connect to last table */
-@@ -511,18 +531,18 @@ DEBG1("6 ");
- DEBG("h6c ");
-
- /* set up table entry in r */
-- r.b = (uch)(k - w);
-+ r.b = (uint8_t)(k - w);
- if (p >= v + n)
- r.e = 99; /* out of values--invalid code */
- else if (*p < s)
- {
-- r.e = (uch)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */
-- r.v.n = (ush)(*p); /* simple code is just the value */
-+ r.e = (uint8_t)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */
-+ r.v.n = (uint16_t)(*p); /* simple code is just the value */
- p++; /* one compiler does not like *p++ */
- }
- else
- {
-- r.e = (uch)e[*p - s]; /* non-simple--look up in lists */
-+ r.e = (uint8_t)e[*p - s]; /* non-simple--look up in lists */
- r.v.n = d[*p++ - s];
- }
- DEBG("h6d ");
-@@ -592,11 +612,12 @@ STATIC int INIT inflate_codes(
- Return an error code or zero if it all goes ok. */
- {
- register unsigned e; /* table entry flag/number of extra bits */
-- unsigned n, d; /* length and index for copy */
-+ unsigned n;
-+ int d; /* source index for copy */
- unsigned w; /* current window position */
- struct huft *t; /* pointer to table entry */
- unsigned ml, md; /* masks for bl and bd bits */
-- register ulg b; /* bit buffer */
-+ register uint32_t b; /* bit buffer */
- register unsigned k; /* number of bits in bit buffer */
-
-
-@@ -622,7 +643,7 @@ STATIC int INIT inflate_codes(
- DUMPBITS(t->b)
- if (e == 16) /* then it's a literal */
- {
-- slide[w++] = (uch)t->v.n;
-+ slide[w++] = (uint8_t)t->v.n;
- Tracevv((stderr, "%c", slide[w-1]));
- if (w == WSIZE)
- {
-@@ -659,11 +680,25 @@ STATIC int INIT inflate_codes(
-
- /* do the copy */
- do {
-- n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e);
-+#ifdef NEW_CODE
-+ if (flush_cb) {
-+#endif
-+ /* Sliding window emulated using circular buffer:
-+ * manage wrap-around */
-+ e = WSIZE - ((d &= WSIZE-1) > w ? d : w);
-+ if (e > n)
-+ e = n;
-+#ifdef NEW_CODE
-+ } else {
-+ e = n;
-+ }
-+#endif
-+ n -= e;
-+
- #if !defined(NOMEMCPY) && !defined(DEBUG)
- if (w - d >= e) /* (this test assumes unsigned comparison) */
- {
-- memcpy(slide + w, slide + d, e);
-+ memcpy(slide + w, slide + d, e);
- w += e;
- d += e;
- }
-@@ -673,9 +708,8 @@ STATIC int INIT inflate_codes(
- slide[w++] = slide[d++];
- Tracevv((stderr, "%c", slide[w-1]));
- } while (--e);
-- if (w == WSIZE)
-- {
-- flush_output(w);
-+ if (w == WSIZE) {
-+ flush_output(w);
- w = 0;
- }
- } while (n);
-@@ -702,7 +736,7 @@ STATIC int INIT inflate_stored(void)
- {
- unsigned n; /* number of bytes in block */
- unsigned w; /* current window position */
-- register ulg b; /* bit buffer */
-+ register uint32_t b; /* bit buffer */
- register unsigned k; /* number of bits in bit buffer */
-
- DEBG("<stor");
-@@ -732,7 +766,7 @@ DEBG("<stor");
- while (n--)
- {
- NEEDBITS(8)
-- slide[w++] = (uch)b;
-+ slide[w++] = (uint8_t)b;
- if (w == WSIZE)
- {
- flush_output(w);
-@@ -838,7 +872,7 @@ STATIC int noinline INIT inflate_dynamic
- unsigned nl; /* number of literal/length codes */
- unsigned nd; /* number of distance codes */
- unsigned *ll; /* literal/length and distance code lengths */
-- register ulg b; /* bit buffer */
-+ register uint32_t b; /* bit buffer */
- register unsigned k; /* number of bits in bit buffer */
- int ret;
-
-@@ -1033,7 +1067,7 @@ STATIC int INIT inflate_block(
- /* decompress an inflated block */
- {
- unsigned t; /* block type */
-- register ulg b; /* bit buffer */
-+ register uint32_t b; /* bit buffer */
- register unsigned k; /* number of bits in bit buffer */
-
- DEBG("<blk");
-@@ -1130,8 +1164,8 @@ STATIC int INIT inflate(void)
- *
- **********************************************************************/
-
--static ulg crc_32_tab[256];
--static ulg crc; /* initialized in makecrc() so it'll reside in bss */
-+static uint32_t crc_32_tab[256];
-+static uint32_t crc; /* initialized in makecrc() so it'll reside in bss */
- #define CRC_VALUE (crc ^ 0xffffffffUL)
-
- /*
-@@ -1172,7 +1206,7 @@ makecrc(void)
- }
-
- /* this is initialized here so this code could reside in ROM */
-- crc = (ulg)0xffffffffUL; /* shift register contents */
-+ crc = (uint32_t)0xffffffffUL; /* shift register contents */
- }
-
- /* gzip flag byte */
-@@ -1184,18 +1218,89 @@ makecrc(void)
- #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
- #define RESERVED 0xC0 /* bit 6,7: reserved */
-
-+#ifdef NEW_CODE
-+/* ===========================================================================
-+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
-+ * (Used for the decompressed data only.)
-+ */
-+static void INIT flush_window(void)
-+{
-+ uint32_t c = crc; /* temporary variable */
-+ unsigned n;
-+ uint8_t *in, ch;
-+
-+ in = window;
-+ for (n = 0; n < outcnt; n++) {
-+ ch = *in++;
-+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-+ }
-+ crc = c;
-+ bytes_out += (uint32_t)outcnt;
-+ if (flush_cb != NULL)
-+ flush_cb(window, outcnt); /* TODO: handle unzip_error */
-+ else
-+ window += outcnt;
-+ outcnt = 0;
-+}
-+
-+static int empty_fill(void *buf, unsigned int len)
-+{
-+ return 0;
-+}
-+#endif
-+
-+
- /*
- * Do the uncompression!
- */
--static int INIT gunzip(void)
-+STATIC int INIT gunzip(
-+#ifdef NEW_CODE
-+ unsigned char *buf, int len,
-+ int(*fill)(void*, unsigned int),
-+ int(*flush)(void*, unsigned int),
-+ unsigned char *output,
-+ int *posp,
-+ void(*error_fn)(char *x)
-+#else
-+ void
-+#endif
-+ )
- {
-- uch flags;
-+ uint8_t flags;
- unsigned char magic[2]; /* magic header */
- char method;
-- ulg orig_crc = 0; /* original crc */
-- ulg orig_len = 0; /* original uncompressed length */
-+ uint32_t orig_crc = 0; /* original crc */
-+ uint32_t orig_len = 0; /* original uncompressed length */
- int res;
-
-+#ifdef NEW_CODE
-+ set_error_fn(error_fn);
-+ if (fill == NULL)
-+ fill_cb = empty_fill;
-+ else
-+ fill_cb = fill;
-+ if (output)
-+ window = output;
-+ else {
-+ window = malloc(0x8000);
-+ if (!window)
-+ panic("can't allocate buffers");
-+ flush_cb = flush;
-+ }
-+
-+ insize = len;
-+ if (buf)
-+ inbuf = buf;
-+ else
-+ inbuf = malloc(INBUFSIZ);
-+#endif
-+
-+ inptr = 0;
-+ outcnt = 0; /* bytes in output buffer */
-+ bytes_out = 0;
-+ crc = (uint32_t)0xffffffffL; /* shift register contents */
-+ makecrc();
-+
- magic[0] = NEXTBYTE();
- magic[1] = NEXTBYTE();
- method = NEXTBYTE();
-@@ -1212,7 +1317,7 @@ static int INIT gunzip(void)
- return -1;
- }
-
-- flags = (uch)get_byte();
-+ flags = (uint8_t)get_byte();
- if ((flags & ENCRYPTED) != 0) {
- error("Input is encrypted");
- return -1;
-@@ -1277,15 +1382,15 @@ static int INIT gunzip(void)
- /* crc32 (see algorithm.doc)
- * uncompressed input size modulo 2^32
- */
-- orig_crc = (ulg) NEXTBYTE();
-- orig_crc |= (ulg) NEXTBYTE() << 8;
-- orig_crc |= (ulg) NEXTBYTE() << 16;
-- orig_crc |= (ulg) NEXTBYTE() << 24;
-+ orig_crc = (uint32_t) NEXTBYTE();
-+ orig_crc |= (uint32_t) NEXTBYTE() << 8;
-+ orig_crc |= (uint32_t) NEXTBYTE() << 16;
-+ orig_crc |= (uint32_t) NEXTBYTE() << 24;
-
-- orig_len = (ulg) NEXTBYTE();
-- orig_len |= (ulg) NEXTBYTE() << 8;
-- orig_len |= (ulg) NEXTBYTE() << 16;
-- orig_len |= (ulg) NEXTBYTE() << 24;
-+ orig_len = (uint32_t) NEXTBYTE();
-+ orig_len |= (uint32_t) NEXTBYTE() << 8;
-+ orig_len |= (uint32_t) NEXTBYTE() << 16;
-+ orig_len |= (uint32_t) NEXTBYTE() << 24;
-
- /* Validate decompression */
- if (orig_crc != CRC_VALUE) {
-@@ -1296,11 +1401,22 @@ static int INIT gunzip(void)
- error("length error");
- return -1;
- }
-+#ifdef NEW_CODE
-+ if (!output)
-+ free(window);
-+ if (posp)
-+ *posp = inptr;
-+#endif
- return 0;
-
- underrun: /* NEXTBYTE() goto's here if needed */
-+ free(window);
-+#ifdef NEW_CODE
-+ if (!buf)
-+ free(inbuf);
-+#endif
- error("out of input data");
- return -1;
- }
-
--
-+#define decompress gunzip
-diff -purN linux-2.6.27.6/lib/Makefile linux-2.6.27.6udpcast/lib/Makefile
---- linux-2.6.27.6/lib/Makefile 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/lib/Makefile 2008-11-16 23:07:34.000000000 +0100
-@@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmd
- rbtree.o radix-tree.o dump_stack.o \
- idr.o int_sqrt.o extable.o prio_tree.o \
- sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-- proportions.o prio_heap.o ratelimit.o show_mem.o
-+ proportions.o prio_heap.o ratelimit.o show_mem.o \
-+ inflate.o decompress_bunzip2.o decompress_unlzma.o
-
- lib-$(CONFIG_MMU) += ioremap.o
- lib-$(CONFIG_SMP) += cpumask.o
-diff -purN linux-2.6.27.6/scripts/bin_size linux-2.6.27.6udpcast/scripts/bin_size
---- linux-2.6.27.6/scripts/bin_size 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.27.6udpcast/scripts/bin_size 2008-11-16 23:43:34.000000000 +0100
-@@ -0,0 +1,10 @@
-+#!/bin/sh
-+
-+if [ $# = 0 ] ; then
-+ echo Usage: $0 file
-+fi
-+
-+size_dec=`stat -c "%s" $1`
-+size_hex_echo_string=`printf "%08x" $size_dec |
-+ sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'`
-+/bin/echo -ne $size_hex_echo_string
-diff -purN linux-2.6.27.6/scripts/Makefile.lib linux-2.6.27.6udpcast/scripts/Makefile.lib
---- linux-2.6.27.6/scripts/Makefile.lib 2008-11-13 18:56:21.000000000 +0100
-+++ linux-2.6.27.6udpcast/scripts/Makefile.lib 2008-11-16 23:02:55.000000000 +0100
-@@ -174,3 +174,17 @@ quiet_cmd_gzip = GZIP $@
- cmd_gzip = gzip -f -9 < $< > $@
-
-
-+# Bzip2
-+# ---------------------------------------------------------------------------
-+
-+# Bzip2 does not include size in file... so we have to fake that
-+size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size
-+
-+quiet_cmd_bzip2 = BZIP2 $@
-+cmd_bzip2 = (bzip2 -9 < $< ; $(size_append) $<) > $@ || (rm -f $@ ; false)
-+
-+# Lzma
-+# ---------------------------------------------------------------------------
-+
-+quiet_cmd_lzma = LZMA $@
-+cmd_lzma = (lzma e $< $@; $(size_append) $<) > $@ || (rm -f $@ ; false)