summaryrefslogtreecommitdiffstats
path: root/target/linux/rb532-2.6/files/arch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/rb532-2.6/files/arch')
-rw-r--r--target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig161
1 files changed, 0 insertions, 161 deletions
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig
deleted file mode 100644
index 47569c0a2..000000000
--- a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
-* prom.c
-**********************************************************************
-* P . Sadik Oct 10, 2003
-*
-* Started change log
-* idt_cpu_freq is make a kernel configuration parameter
-* idt_cpu_freq is exported so that other modules can use it.
-* Code cleanup
-**********************************************************************
-* P. Sadik Oct 20, 2003
-*
-* Removed NVRAM code from here, since they are already available under
-* nvram directory.
-* Added serial port initialisation.
-**********************************************************************
-**********************************************************************
-* P. Sadik Oct 30, 2003
-*
-* Added reset_cons_port
-**********************************************************************
-
- P.Christeas, 2005-2006
- Port to 2.6, add 2.6 cmdline parsing
-
-*/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/console.h>
-#include <asm/bootinfo.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <asm/rc32434/ddr.h>
-
-#define PROM_ENTRY(x) (0xbfc00000+((x)*8))
-extern void __init setup_serial_port(void);
-
-unsigned int idt_cpu_freq = 132000000;
-EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int board_type = 500;
-EXPORT_SYMBOL(board_type);
-unsigned int gpio_bootup_state = 0;
-EXPORT_SYMBOL(gpio_bootup_state);
-
-
-char mips_mac_address[18] = "08:00:06:05:40:01";
-EXPORT_SYMBOL(mips_mac_address);
-
-/* what to append to cmdline when button is [not] pressed */
-#define GPIO_INIT_NOBUTTON ""
-#define GPIO_INIT_BUTTON " 2"
-
-#ifdef CONFIG_MIKROTIK_RB500
-unsigned soft_reboot = 0;
-EXPORT_SYMBOL(soft_reboot);
-#endif
-
-#define SR_NMI 0x00180000 /* NMI */
-#define SERIAL_SPEED_ENTRY 0x00000001
-
-#ifdef CONFIG_REMOTE_DEBUG
-extern int remote_debug;
-#endif
-
-extern unsigned long mips_machgroup;
-extern unsigned long mips_machtype;
-
-#define FREQ_TAG "HZ="
-#define GPIO_TAG "gpio="
-#define KMAC_TAG "kmac="
-#define MEM_TAG "mem="
-#define BOARD_TAG "board="
-#define IGNORE_CMDLINE_MEM 1
-#define DEBUG_DDR
-
-void parse_soft_settings(unsigned *ptr, unsigned size);
-void parse_hard_settings(unsigned *ptr, unsigned size);
-
-void __init prom_setup_cmdline(void);
-
-void __init prom_init(void)
-{
- DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
- phys_t memsize = 0-ddr->ddrmask;
-
- /* this should be the very first message, even before serial is properly initialized */
- prom_setup_cmdline();
- setup_serial_port();
-
- mips_machgroup = MACH_GROUP_MIKROTIK;
- soft_reboot = read_c0_status() & SR_NMI;
- pm_power_off = NULL;
-
- /*
- * give all RAM to boot allocator,
- * except for the first 0x400 and the last 0x200 bytes
- */
- add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
-}
-
-void prom_free_prom_memory(void)
-{
- /* FIXME: STUB */
-}
-
-void __init prom_setup_cmdline(void){
- char cmd_line[CL_SIZE];
- char *cp;
- int prom_argc;
- char **prom_argv, **prom_envp;
- int i;
-
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
-
- cp=cmd_line;
- /* Note: it is common that parameters start at argv[1] and not argv[0],
- however, our elf loader starts at [0] */
- for(i=0;i<prom_argc;i++){
- if (strncmp(prom_argv[i], FREQ_TAG, sizeof(FREQ_TAG) - 1) == 0) {
- idt_cpu_freq = simple_strtoul(prom_argv[i] + sizeof(FREQ_TAG) - 1, 0, 10);
- continue;
- }
-#ifdef IGNORE_CMDLINE_MEM
- /* parses out the "mem=xx" arg */
- if (strncmp(prom_argv[i], MEM_TAG, sizeof(MEM_TAG) - 1) == 0) {
- continue;
- }
-#endif
- if (i>0) *(cp++) = ' ';
- if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) {
- board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10);
- }
- if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) {
- gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10);
- }
- strcpy(cp,prom_argv[i]);
- cp+=strlen(prom_argv[i]);
- }
-
- i=strlen(arcs_cmdline);
- if (i>0){
- *(cp++) = ' ';
- strcpy(cp,arcs_cmdline);
- cp+=strlen(arcs_cmdline);
- }
- if (gpio_bootup_state&0x02)
- strcpy(cp,GPIO_INIT_NOBUTTON);
- else
- strcpy(cp,GPIO_INIT_BUTTON);
- cmd_line[CL_SIZE-1] = '\0';
-
- strcpy(arcs_cmdline,cmd_line);
-}
-