summaryrefslogtreecommitdiffstats
path: root/target/linux/rb1xx-2.6/files
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/rb1xx-2.6/files')
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile7
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c186
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c156
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c135
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S135
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c118
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c106
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c63
-rw-r--r--target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c96
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c58
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c196
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c507
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h106
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c524
-rw-r--r--target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c790
-rw-r--r--target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h60
-rw-r--r--target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h70
-rw-r--r--target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h89
-rw-r--r--target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h167
19 files changed, 3569 insertions, 0 deletions
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
new file mode 100644
index 000000000..a68b4a145
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
new file mode 100644
index 000000000..18e267479
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
@@ -0,0 +1,186 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_switch.h>
+#include <myloader.h>
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+struct adm5120_info adm5120_info = {
+ .cpu_speed = CPU_SPEED_175,
+ .cpu_package = CPU_PACKAGE_PQFP,
+ .boot_loader = BOOT_LOADER_UNKNOWN,
+ .board_type = BOARD_TYPE_UNKNOWN
+};
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+ [BOOT_LOADER_UNKNOWN] = "Unknown",
+ [BOOT_LOADER_CFE] = "CFE",
+ [BOOT_LOADER_UBOOT] = "U-Boot",
+ [BOOT_LOADER_MYLOADER] = "MyLoader"
+};
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
+
+static void __init detect_cpu_info(void)
+{
+ uint32_t *reg;
+ uint32_t code;
+ uint32_t clks;
+
+ reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE);
+ code = *reg;
+
+ clks = CODE_GET_CLKS(code);
+
+ adm5120_info.product_code = CODE_GET_PC(code);
+ adm5120_info.revision = CODE_GET_REV(code);
+
+ adm5120_info.cpu_speed = CPU_SPEED_175;
+ if (clks & 1)
+ adm5120_info.cpu_speed += 25000000;
+ if (clks & 2)
+ adm5120_info.cpu_speed += 50000000;
+
+ adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+ CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP;
+
+ adm5120_info.nand_boot = CODE_GET_NAB(code);
+
+}
+
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+ /*
+ * This method only works, when we are booted directly from the CFE.
+ */
+ uint32_t cfe_handle = (uint32_t) fw_arg0;
+ uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+ uint32_t cfe_entry = (uint32_t) fw_arg2;
+ uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+ /* Check for CFE by finding the CFE magic number */
+ if (cfe_seal != CFE_EPTSEAL) {
+ /* We are not booted from CFE */
+ return 0;
+ }
+
+ /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+ if (cfe_a1_val != 0) {
+ return 0;
+ }
+
+ /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+ if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static int __init detect_uboot(void)
+{
+ /* FIXME: not yet implemented */
+ return 0;
+}
+
+static int __init detect_myloader(void)
+{
+ struct mylo_system_params *sysp;
+ struct mylo_board_params *boardp;
+ struct mylo_partition_table *parts;
+
+ sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS);
+ boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS);
+ parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS);
+
+ /* Check for some magic numbers */
+ if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) ||
+ (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) ||
+ (parts->magic != MYLO_MAGIC_PARTITIONS))
+ return 0;
+
+ return 1;
+}
+
+static int __init detect_routerboot(void)
+{
+ /* FIXME: not yet implemented */
+ return 0;
+}
+
+static int __init detect_bootloader(void)
+{
+ if (detect_cfe())
+ return BOOT_LOADER_CFE;
+
+ if (detect_uboot())
+ return BOOT_LOADER_UBOOT;
+
+ if (detect_myloader())
+ return BOOT_LOADER_MYLOADER;
+
+ if (detect_routerboot())
+ return BOOT_LOADER_ROUTERBOOT;
+
+ return BOOT_LOADER_UNKNOWN;
+}
+
+/*
+ * Board detection
+ */
+static void __init detect_board_type(void)
+{
+ /* FIXME: not yet implemented */
+}
+
+void __init adm5120_info_show(void)
+{
+ printk("ADM%04X%s revision %d, running at %ldMHz\n",
+ adm5120_info.product_code,
+ (adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P",
+ adm5120_info.revision,
+ (adm5120_info.cpu_speed / 1000000)
+ );
+ printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]);
+ printk("Booted from : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR");
+}
+
+void __init adm5120_info_init(void)
+{
+ detect_cpu_info();
+ adm5120_info.boot_loader = detect_bootloader();
+ detect_board_type();
+
+ adm5120_info_show();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
new file mode 100644
index 000000000..46f3bb05e
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Creator : daniell@admtek.com.tw
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq_cpu.h>
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern irq_desc_t irq_desc[];
+extern asmlinkage void mipsIRQ(void);
+
+int mips_int_lock(void);
+void mips_int_unlock(int);
+
+unsigned int mips_counter_frequency;
+
+#define ADM5120_INTC_REG(reg) (*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
+#define ADM5120_INTC_STATUS ADM5120_INTC_REG(0x00)
+#define ADM5120_INTC_ENABLE ADM5120_INTC_REG(0x08)
+#define ADM5120_INTC_DISABLE ADM5120_INTC_REG(0x0c)
+#define ADM5120_IRQ_MAX 9
+#define ADM5120_IRQ_MASK 0x3ff
+
+void adm5120_hw0_irqdispatch(struct pt_regs *regs)
+{
+ unsigned long intsrc;
+ int i;
+
+ intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
+
+ for (i = 0; intsrc; intsrc >>= 1, i++)
+ if (intsrc & 0x1)
+ do_IRQ(i);
+ else
+ spurious_interrupt();
+}
+
+void mips_timer_interrupt(struct pt_regs *regs)
+{
+ write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+ ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
+}
+
+/* Main interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+ if (cp0_cause & CAUSEF_IP7) {
+ mips_timer_interrupt( regs);
+ } else if (cp0_cause & CAUSEF_IP2) {
+ adm5120_hw0_irqdispatch( regs);
+ }
+}
+
+void enable_adm5120_irq(unsigned int irq)
+{
+ int s;
+
+ /* Disable all interrupts (FIQ/IRQ) */
+ s = mips_int_lock();
+
+ if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
+ goto err_exit;
+
+ ADM5120_INTC_ENABLE = (1<<irq);
+
+err_exit:
+
+ /* Restore the interrupts states */
+ mips_int_unlock(s);
+}
+
+
+void disable_adm5120_irq(unsigned int irq)
+{
+ int s;
+
+ /* Disable all interrupts (FIQ/IRQ) */
+ s = mips_int_lock();
+
+ if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
+ goto err_exit;
+
+ ADM5120_INTC_DISABLE = (1<<irq);
+
+err_exit:
+ /* Restore the interrupts states */
+ mips_int_unlock(s);
+}
+
+unsigned int startup_adm5120_irq(unsigned int irq)
+{
+ enable_adm5120_irq(irq);
+ return 0;
+}
+
+void shutdown_adm5120_irq(unsigned int irq)
+{
+ disable_adm5120_irq(irq);
+}
+
+static inline void ack_adm5120_irq(unsigned int irq_nr)
+{
+ ADM5120_INTC_DISABLE = (1 << irq_nr);
+}
+
+
+static void end_adm5120_irq(unsigned int irq_nr)
+{
+ ADM5120_INTC_ENABLE = (1 << irq_nr);
+}
+
+static hw_irq_controller adm5120_irq_type = {
+ .typename = "MIPS",
+ .startup = startup_adm5120_irq,
+ .shutdown = shutdown_adm5120_irq,
+ .enable = enable_adm5120_irq,
+ .disable = disable_adm5120_irq,
+ .ack = ack_adm5120_irq,
+ .end = end_adm5120_irq,
+ .set_affinity = NULL,
+};
+
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &adm5120_irq_type;
+ }
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
new file mode 100644
index 000000000..e5c7f0c91
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
@@ -0,0 +1,135 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ * daniell@admtek.com.tw
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *****************************************************************************/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm-mips/mips-boards/prom.h>
+
+extern char *prom_getenv(char *envname);
+
+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+#define ADM5120_MEMCTRL 0x1200001c
+#define ADM5120_MEMCTRL_SDRAM_MASK 0x7
+
+static const unsigned long adm_sdramsize[] __initdata = {
+ 0x0, /* Reserved */
+ 0x0400000, /* 4Mb */
+ 0x0800000, /* 8Mb */
+ 0x1000000, /* 16Mb */
+ 0x4000000, /* 64Mb */
+ 0x8000000, /* 128Mb */
+};
+
+/* determined physical memory size, not overridden by command line args */
+unsigned long physical_memsize = 0L;
+
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+ char *memsize_str;
+ unsigned int memsize;
+ char cmdline[CL_SIZE], *ptr;
+
+ memsize_str = prom_getenv("memsize");
+
+ if (!memsize_str)
+ {
+ prom_printf("memsize not set in boot prom, set to default (8Mb)\n");
+ physical_memsize = 0x00800000;
+ }
+ else
+#ifdef DEBUG
+ prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+ physical_memsize = simple_strtol(memsize_str, NULL, 0);
+
+ /* Check the command line for a memsize directive that overrides
+ * the physical/default amount */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr)
+ memsize = memparse(ptr + 8, &ptr);
+ else
+ memsize = physical_memsize;
+
+ memset(mdesc, 0, sizeof(mdesc));
+
+ mdesc[0].type = BOOT_MEM_RAM;
+ mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
+ mdesc[0].size = memsize - mdesc[0].base;
+
+ return &mdesc[0];
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+ p = prom_getmdesc();
+
+ while (p->size)
+ {
+ long type;
+ unsigned long base, size;
+ base = p->base;
+ type = p->type,
+ size = p->size;
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+#if 0
+void __init prom_meminit(void)
+{
+ unsigned long base = CPHYSADDR(PFN_ALIGN(&_end));
+ unsigned long size;
+
+ u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
+ size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
+ add_memory_region(base, size-base, BOOT_MEM_RAM);
+}
+#endif
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ /* We do not have to prom memory to free */
+ return 0;
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
new file mode 100644
index 000000000..f118fb402
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
@@ -0,0 +1,135 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#define STATUS_IE 0x00000001
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ * common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ * would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ * between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ * wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+
+NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE
+ mfc0 s1, CP0_STATUS
+ and s0, s0, s1
+
+ /* First we check for r4k counter/timer IRQ. */
+ andi a0, s0, CAUSEF_IP7
+ beq a0, zero, 1f
+ nop
+
+ move a0, sp
+ jal mips_timer_interrupt
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+ andi a0, s0, CAUSEF_IP2
+ beq a0, zero, 1f
+ nop
+
+ move a0, sp
+ jal adm5120_hw0_irqdispatch
+ nop
+1:
+ j ret_from_irq
+ nop
+
+END(mipsIRQ)
+
+
+LEAF(mips_int_lock)
+ .set noreorder
+ mfc0 v0, CP0_STATUS
+ li v1, ~STATUS_IE
+ and v1, v1, v0
+ mtc0 v1, CP0_STATUS
+ j ra
+ and v0, v0, STATUS_IE
+ .set reorder
+END(mips_int_lock)
+
+
+LEAF(mips_int_unlock)
+ mfc0 v0, CP0_STATUS
+ and a0, a0, STATUS_IE
+ or v0, v0, a0
+ mtc0 v0, CP0_STATUS
+ j ra
+ nop
+END(mips_int_unlock)
+
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
new file mode 100644
index 000000000..e644fc37c
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
@@ -0,0 +1,118 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ * daniell@admtek.com.tw
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+
+void setup_prom_printf(int);
+void prom_printf(char *, ...);
+void prom_meminit(void);
+
+#define ADM5120_ENVC 1
+
+char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"};
+
+#define READCSR(r) *(volatile unsigned long *)(0xB2600000+(r))
+#define WRITECSR(r,v) *(volatile unsigned long *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG 0x00
+#define UART_FR_REG 0x18
+#define UART_TX_FIFO_FULL 0x20
+
+int putPromChar(char c)
+{
+ WRITECSR(UART_DR_REG, c);
+ while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+ return 0;
+}
+
+/*
+ * Ugly prom_printf used for debugging
+ */
+
+void prom_printf(char *fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+ char buf[1024];
+
+ va_start(args, fmt);
+ l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+ va_end(args);
+
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++) {
+ /* Crude cr/nl handling is better than none */
+ if (*p == '\n')
+ putPromChar('\r');
+ putPromChar(*p);
+ }
+}
+
+char *prom_getenv(char *envname)
+{
+ int i, index=0;
+
+ i = strlen(envname);
+
+ printk(KERN_INFO "GETENV: envname is %s\n", envname);
+
+ while(index < (2*ADM5120_ENVC)) {
+ if(strncmp(envname, adm5120_envp[index], i) == 0) {
+ printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]);
+ return(adm5120_envp[index+1]);
+ }
+ index += 2;
+ }
+
+ printk(KERN_INFO "GETENV: not found.\n");
+ return(NULL);
+}
+
+
+/*
+ * initialize the prom module.
+ */
+void __init prom_init(void)
+{
+ /* you should these macros defined in include/asm/bootinfo.h */
+ mips_machgroup = MACH_GROUP_ADM_GW;
+ mips_machtype = MACH_ADM_GW_5120;
+
+ adm5120_info_init();
+
+ /* init command line, register a default kernel command line */
+ strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+
+ /* init memory map */
+ prom_meminit();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
new file mode 100644
index 000000000..1b99d7799
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Creator : daniell@admtek.com.tw
+ * Copyright 1999, 2000 MIPS Technologies, Inc.
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <adm5120_info.h>
+
+#define ADM5120_SOFTRESET 0x12000004
+#define STATUS_IE 0x00000001
+#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
+
+void mips_time_init(void);
+
+extern unsigned int mips_counter_frequency;
+
+void adm5120_restart(char *command)
+{
+ *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+
+void adm5120_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1);
+}
+
+
+void adm5120_power_off(void)
+{
+ adm5120_halt();
+}
+
+void __init adm5120_time_init(void)
+{
+ mips_counter_frequency = adm5120_info.cpu_speed >> 1;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ /* to generate the first timer interrupt */
+ write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+ clear_c0_status(ST0_BEV);
+ set_c0_status(ALLINTS);
+}
+
+void __init plat_mem_setup(void)
+{
+ printk(KERN_INFO "ADM5120 board setup\n");
+
+ board_time_init = adm5120_time_init;
+ //board_timer_setup = mips_timer_setup;
+
+ _machine_restart = adm5120_restart;
+ _machine_halt = adm5120_halt;
+ pm_power_off = adm5120_power_off;
+
+ set_io_port_base(KSEG1);
+}
+
+const char *get_system_type(void)
+{
+ return "ADM5120 Board";
+}
+
+static struct resource adm5120_hcd_resources[] = {
+ [0] = {
+ .start = 0x11200000,
+ .end = 0x11200084,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x3,
+ .end = 0x3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device adm5120hcd_device = {
+ .name = "adm5120-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
+ .resource = adm5120_hcd_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &adm5120hcd_device,
+};
+
+static int __init adm5120_init(void)
+{
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+subsys_initcall(adm5120_init);
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
new file mode 100644
index 000000000..91dae8999
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_defs.h>
+
+volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
+volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
+
+#define PCI_ENABLE 0x80000000
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *val)
+{
+ *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+ switch (size) {
+ case 1:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
+ break;
+ case 2:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
+ break;
+ default:
+ *val = (*pci_config_data_reg);
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t val)
+{
+ *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+ switch (size) {
+ case 1:
+ *(volatile u8 *)(((int)pci_config_data_reg) +
+ (where & 3)) = val;
+ break;
+ case 2:
+ *(volatile u16 *)(((int)pci_config_data_reg) +
+ (where & 2)) = (val);
+ break;
+ default:
+ *pci_config_data_reg = (val);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
new file mode 100644
index 000000000..78de001c5
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+
+extern struct pci_ops adm5120_pci_ops;
+
+#define PCI_CMM_IOACC_EN 0x1
+#define PCI_CMM_MEMACC_EN 0x2
+#define PCI_CMM_MASTER_EN 0x4
+#define PCI_CMM_DEF \
+ (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
+
+#define PCI_DEF_CACHE_LINE_SZ 4
+
+
+struct resource pci_io_resource = {
+ .name = "ADM5120 PCI I/O",
+ .start = ADM5120_PCIIO_BASE,
+ .end = ADM5120_PCICFG_ADDR-1,
+ .flags = IORESOURCE_IO
+};
+
+struct resource pci_mem_resource = {
+ .name = "ADM5120 PCI MEM",
+ .start = ADM5120_PCIMEM_BASE,
+ .end = ADM5120_PCIIO_BASE-1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+ .pci_ops = &adm5120_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot < 2 || slot > 4)
+ return -1;
+ return slot + 4;
+}
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn == 0) {
+ pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ PCI_DEF_CACHE_LINE_SZ);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
+
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static int __init adm5120_pci_setup(void)
+{
+ int pci_bios;
+
+ pci_bios = adm5120_has_pci();
+
+ printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
+ if (pci_bios == 0)
+ return 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00000000;
+ PCIBIOS_MIN_MEM = 0x00000000;
+
+ /* Set I/O resource limits. */
+ ioport_resource.end = 0x1fffffff;
+ iomem_resource.end = 0xffffffff;
+
+ register_pci_controller(&adm5120_controller);
+ return 0;
+}
+
+subsys_initcall(adm5120_pci_setup);
diff --git a/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c b/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c
new file mode 100644
index 000000000..6fccfb029
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c
@@ -0,0 +1,58 @@
+/*
+ * ADM5120 LED (GPIO) driver
+ *
+ * Copyright (C) Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+
+#define LED_MINOR 151
+#define GPIO_IO ((unsigned long *)0xb20000b8)
+
+static ssize_t adm5120_led_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ unsigned char val;
+
+ if (!len || get_user(val, data))
+ return -EFAULT;
+ *GPIO_IO=(*GPIO_IO & 0x00ffffff) | (val<<24);
+ return 1;
+}
+
+static struct file_operations adm5120_led_fops = {
+ .owner = THIS_MODULE,
+ .write = adm5120_led_write,
+};
+
+static struct miscdevice adm5120_led_device = {
+ LED_MINOR,
+ "led",
+ &adm5120_led_fops,
+};
+
+static int __init adm5120_led_init(void)
+{
+ printk(KERN_INFO "ADM5120 LED & GPIO driver\n");
+ if (misc_register(&adm5120_led_device)) {
+ printk(KERN_WARNING "Couldn't register device %d\n", LED_MINOR);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static void __exit adm5120_led_exit(void)
+{
+ misc_deregister(&adm5120_led_device);
+}
+
+module_init(adm5120_led_init);
+module_exit(adm5120_led_exit);
+
+MODULE_DESCRIPTION("ADM5120 LED and GPIO driver");
+MODULE_AUTHOR("Jeroen Vreeken");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c
new file mode 100644
index 000000000..9d6588acf
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c
@@ -0,0 +1,196 @@
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+#ifdef CONFIG_MIPS_ADM5120
+#include <asm/mach-adm5120/adm5120_defs.h>
+#endif
+
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+
+#define GPIOF 0x050000
+#define GPIOC 0x050004
+#define GPIOD 0x050008
+
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+#define DEV2BASE 0x010020
+
+#define LO_WPX (1 << 0)
+#define LO_ALE (1 << 1)
+#define LO_CLE (1 << 2)
+#define LO_CEX (1 << 3)
+#define LO_FOFF (1 << 5)
+#define LO_SPICS (1 << 6)
+#define LO_ULED (1 << 7)
+
+#define MEM32(x) *((volatile unsigned *) (x))
+
+
+/* RouterBoard RB1xx specific definitions */
+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
+
+#define NAND_RW_REG 0x0 //data register
+#define NAND_SET_CEn 0x1 //CE# low
+#define NAND_CLR_CEn 0x2 //CE# high
+#define NAND_CLR_CLE 0x3 //CLE low
+#define NAND_SET_CLE 0x4 //CLE high
+#define NAND_CLR_ALE 0x5 //ALE low
+#define NAND_SET_ALE 0x6 //ALE high
+#define NAND_SET_SPn 0x7 //SP# low (use spare area)
+#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
+#define NAND_SET_WPn 0x9 //WP# low
+#define NAND_CLR_WPn 0xA //WP# high
+#define NAND_STS_REG 0xB //Status register
+
+static void __iomem *p_nand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
+
+static int rb500_dev_ready(struct mtd_info *mtd)
+{
+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_CLE: bit 2 -> bit 3
+ * NAND_ALE: bit 3 -> bit 2
+ */
+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned char orbits, nandbits;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ orbits = (ctrl & NAND_CLE) << 1;
+ orbits |= (ctrl & NAND_ALE) >> 1;
+
+ nandbits = (~ctrl & NAND_CLE) << 1;
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+ changeLatchU5(orbits, nandbits);
+ }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+
+}
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+static int rb100_dev_ready(struct mtd_info *mtd)
+{
+ return SMEM1(NAND_STS_REG) & 0x80; /* found out by experiment */
+}
+
+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE)
+ SMEM1(ctrl) = 0x01;
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+#endif
+
+
+static struct mtd_partition partition_info[] = {
+ {
+ name:"RouterBoard NAND Boot",
+ offset:0,
+ size:4 * 1024 * 1024},
+ {
+ name:"RouterBoard NAND Main",
+ offset:MTDPART_OFS_NXTBLK,
+ size:MTDPART_SIZ_FULL}
+};
+
+static struct mtd_info rmtd;
+static struct nand_chip rnand;
+
+static unsigned init_ok = 0;
+
+unsigned get_rbnand_block_size(void)
+{
+ if (init_ok)
+ return rmtd.writesize;
+ else
+ return 0;
+}
+
+EXPORT_SYMBOL(get_rbnand_block_size);
+
+int __init rbmips_init(void)
+{
+ memset(&rmtd, 0, sizeof(rmtd));
+ memset(&rnand, 0, sizeof(rnand));
+
+#ifdef CONFIG_MIKROTIK_RB500
+ printk("RB500 nand\n");
+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE);
+ rnand.cmd_ctrl = rbmips_hwcontrol500;
+
+ rnand.dev_ready = rb500_dev_ready;
+ rnand.IO_ADDR_W = (unsigned char *)
+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
+ rnand.IO_ADDR_R = rnand.IO_ADDR_W;
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+ printk("RB100 nand\n");
+ /* enable NAND flash */
+ MEM32(0xB2000064) = 0x100;
+ /* boot done */
+ MEM32(0xB2000008) = 0x1;
+ SMEM1(NAND_SET_SPn) = 0x01;
+ SMEM1(NAND_CLR_WPn) = 0x01;
+ rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
+ rnand.IO_ADDR_W = rnand.IO_ADDR_R;
+ rnand.cmd_ctrl = rbmips_hwcontrol100;
+ rnand.dev_ready = rb100_dev_ready;
+#endif
+ p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
+ if (!p_nand) {
+ printk("RBnand Unable ioremap buffer");
+ return -ENXIO;
+ }
+ rnand.ecc.mode = NAND_ECC_SOFT;
+ rnand.chip_delay = 25;
+ rnand.options |= NAND_NO_AUTOINCR;
+ rmtd.priv = &rnand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+ int *b;
+
+ b = (int *) KSEG1ADDR(0x18010020);
+ printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
+ b[1], b[2], b[3]);
+#endif
+
+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
+ printk("RBxxx nand device not found");
+ iounmap((void *) p_nand);
+ return -ENXIO;
+ }
+
+ add_mtd_partitions(&rmtd, partition_info, 2);
+ init_ok = 1;
+ return 0;
+}
+
+module_init(rbmips_init);
diff --git a/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c
new file mode 100644
index 000000000..fb1752b63
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c
@@ -0,0 +1,507 @@
+/*
+ * ADM5120 built in ethernet switch driver
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ * Inspiration for this driver came from the original ADMtek 2.4
+ * driver, Copyright ADMtek Inc.
+ */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <asm/mipsregs.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "adm5120sw.h"
+
+#include "adm5120_info.h"
+
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * The ADM5120 uses an internal matrix to determine which ports
+ * belong to which VLAN.
+ * The default generates a VLAN (and device) for each port
+ * (including MII port) and the CPU port is part of all of them.
+ *
+ * Another example, one big switch and everything mapped to eth0:
+ * 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00
+ */
+static unsigned char vlan_matrix[SW_DEVS] = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
+};
+
+static int adm5120_nrdevs;
+
+static struct net_device *adm5120_devs[SW_DEVS];
+static struct adm5120_dma
+ adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
+ adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
+ adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
+ adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
+ *adm5120_dma_txh,
+ *adm5120_dma_txl,
+ *adm5120_dma_rxh,
+ *adm5120_dma_rxl;
+static struct sk_buff
+ *adm5120_skb_rxh[ADM5120_DMA_RXH],
+ *adm5120_skb_rxl[ADM5120_DMA_RXL],
+ *adm5120_skb_txh[ADM5120_DMA_TXH],
+ *adm5120_skb_txl[ADM5120_DMA_TXL];
+static int adm5120_rxhi = 0;
+static int adm5120_rxli = 0;
+/* We don't use high priority tx for now */
+/*static int adm5120_txhi = 0;*/
+static int adm5120_txli = 0;
+static int adm5120_txhit = 0;
+static int adm5120_txlit = 0;
+static int adm5120_if_open = 0;
+
+static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+{
+ *(volatile unsigned long*)(SW_BASE+reg) = val;
+}
+
+static inline unsigned long adm5120_get_reg(unsigned int reg)
+{
+ return *(volatile unsigned long*)(SW_BASE+reg);
+}
+
+static inline void adm5120_rxfixup(struct adm5120_dma *dma,
+ struct sk_buff **skbl, int num)
+{
+ int i;
+
+ /* Resubmit the entire ring */
+ for (i=0; i<num; i++) {
+ dma[i].status = 0;
+ dma[i].cntl = 0;
+ dma[i].len = ADM5120_DMA_RXSIZE;
+ dma[i].data = ADM5120_DMA_ADDR(skbl[i]->data) |
+ ADM5120_DMA_OWN | (i==num-1 ? ADM5120_DMA_RINGEND : 0);
+ }
+}
+
+static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
+ int *index, int num)
+{
+ struct sk_buff *skb, *skbn;
+ struct adm5120_sw *priv;
+ struct net_device *dev;
+ int port, vlan, len;
+
+ while (!(dma[*index].data & ADM5120_DMA_OWN)) {
+ port = (dma[*index].status & ADM5120_DMA_PORTID);
+ port >>= ADM5120_DMA_PORTSHIFT;
+ for (vlan = 0; vlan < adm5120_nrdevs; vlan++) {
+ if ((1<<port) & vlan_matrix[vlan])
+ break;
+ }
+ if (vlan == adm5120_nrdevs)
+ vlan = 0;
+ dev = adm5120_devs[vlan];
+ skb = skbl[*index];
+ len = (dma[*index].status & ADM5120_DMA_LEN);
+ len >>= ADM5120_DMA_LENSHIFT;
+ len -= ETH_FCS;
+
+ priv = netdev_priv(dev);
+ if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
+ dma[*index].status & ADM5120_DMA_FCSERR) {
+ priv->stats.rx_errors++;
+ skbn = NULL;
+ } else {
+ skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+ if (skbn) {
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ dev->last_rx = jiffies;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes+=len;
+ skb_reserve(skbn, 2);
+ skbl[*index] = skbn;
+ } else {
+ printk(KERN_INFO "%s recycling!\n", dev->name);
+ }
+ }
+
+ dma[*index].status = 0;
+ dma[*index].cntl = 0;
+ dma[*index].len = ADM5120_DMA_RXSIZE;
+ dma[*index].data = ADM5120_DMA_ADDR(skbl[*index]->data) |
+ ADM5120_DMA_OWN |
+ (num-1==*index ? ADM5120_DMA_RINGEND : 0);
+ if (num == ++*index)
+ *index = 0;
+ if (skbn)
+ netif_rx(skb);
+ }
+}
+
+static inline void adm5120_tx(struct adm5120_dma *dma, struct sk_buff **skbl,
+ int *index, int num)
+{
+ while((dma[*index].data & ADM5120_DMA_OWN) == 0 && skbl[*index]) {
+ dev_kfree_skb_irq(skbl[*index]);
+ skbl[*index] = NULL;
+ if (++*index == num)
+ *index = 0;
+ }
+}
+
+static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+{
+ unsigned long intreg;
+
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTHANDLE);
+
+ intreg = adm5120_get_reg(ADM5120_INT_ST);
+ adm5120_set_reg(ADM5120_INT_ST, intreg);
+
+ if (intreg & ADM5120_INT_RXH)
+ adm5120_rx(adm5120_dma_rxh, adm5120_skb_rxh, &adm5120_rxhi,
+ ADM5120_DMA_RXH);
+ if (intreg & ADM5120_INT_HFULL)
+ adm5120_rxfixup(adm5120_dma_rxh, adm5120_skb_rxh,
+ ADM5120_DMA_RXH);
+ if (intreg & ADM5120_INT_RXL)
+ adm5120_rx(adm5120_dma_rxl, adm5120_skb_rxl, &adm5120_rxli,
+ ADM5120_DMA_RXL);
+ if (intreg & ADM5120_INT_LFULL)
+ adm5120_rxfixup(adm5120_dma_rxl, adm5120_skb_rxl,
+ ADM5120_DMA_RXL);
+ if (intreg & ADM5120_INT_TXH)
+ adm5120_tx(adm5120_dma_txh, adm5120_skb_txh, &adm5120_txhit,
+ ADM5120_DMA_TXH);
+ if (intreg & ADM5120_INT_TXL)
+ adm5120_tx(adm5120_dma_txl, adm5120_skb_txl, &adm5120_txlit,
+ ADM5120_DMA_TXL);
+
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+
+ return IRQ_HANDLED;
+}
+
+static void adm5120_set_vlan(char *matrix)
+{
+ unsigned long val;
+
+ val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+ adm5120_set_reg(ADM5120_VLAN_GI, val);
+ val = matrix[4] + (matrix[5]<<8);
+ adm5120_set_reg(ADM5120_VLAN_GII, val);
+}
+
+static int adm5120_sw_open(struct net_device *dev)
+{
+ if (!adm5120_if_open++)
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int adm5120_sw_stop(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+ if (!--adm5120_if_open)
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTMASKALL);
+ return 0;
+}
+
+static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct adm5120_dma *dma = adm5120_dma_txl;
+ struct sk_buff **skbl = adm5120_skb_txl;
+ struct adm5120_sw *priv = netdev_priv(dev);
+ int *index = &adm5120_txli;
+ int num = ADM5120_DMA_TXL;
+ int trigger = ADM5120_SEND_TRIG_L;
+
+ dev->trans_start = jiffies;
+ if (dma[*index].data & ADM5120_DMA_OWN) {
+ dev_kfree_skb(skb);
+ priv->stats.tx_dropped++;
+ return 0;
+ }
+
+ dma[*index].data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
+ if (*index == num-1)
+ dma[*index].data |= ADM5120_DMA_RINGEND;
+ dma[*index].status =
+ ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+ (0x1 << priv->port);
+ dma[*index].len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ skbl[*index]=skb;
+
+ if (++*index == num)
+ *index = 0;
+ adm5120_set_reg(ADM5120_SEND_TRIG, trigger);
+
+ return 0;
+}
+
+static void adm5120_tx_timeout(struct net_device *dev)
+{
+ netif_wake_queue(dev);
+}
+
+static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+{
+ return &((struct adm5120_sw *)netdev_priv(dev))->stats;
+}
+
+static void adm5120_set_multicast_list(struct net_device *dev)
+{
+ struct adm5120_sw *priv = netdev_priv(dev);
+ int portmask;
+
+ portmask = vlan_matrix[priv->port] & 0x3f;
+
+ if (dev->flags & IFF_PROMISC)
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) &
+ ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
+ else
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) |
+ (portmask << ADM5120_DISUNSHIFT));
+
+ if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+ dev->mc_count)
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) &
+ ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
+ else
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) |
+ (portmask << ADM5120_DISMCSHIFT));
+}
+
+static void adm5120_write_mac(struct net_device *dev)
+{
+ struct adm5120_sw *priv = netdev_priv(dev);
+ unsigned char *mac = dev->dev_addr;
+
+ adm5120_set_reg(ADM5120_MAC_WT1,
+ mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
+ adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
+ (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+
+ while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+}
+
+static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ adm5120_write_mac(dev);
+ return 0;
+}
+
+static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int err;
+ struct adm5120_sw_info info;
+ struct adm5120_sw *priv = netdev_priv(dev);
+
+ switch(cmd) {
+ case SIOCGADMINFO:
+ info.magic = 0x5120;
+ info.ports = adm5120_nrdevs;
+ info.vlan = priv->port;
+ err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+ if (err)
+ return -EFAULT;
+ break;
+ case SIOCSMATRIX:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = copy_from_user(vlan_matrix, rq->ifr_data,
+ sizeof(vlan_matrix));
+ if (err)
+ return -EFAULT;
+ adm5120_set_vlan(vlan_matrix);
+ break;
+ case SIOCGMATRIX:
+ err = copy_to_user(rq->ifr_data, vlan_matrix,
+ sizeof(vlan_matrix));
+ if (err)
+ return -EFAULT;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+ int num)
+{
+ memset(dma, 0, sizeof(struct adm5120_dma)*num);
+ dma[num-1].data |= ADM5120_DMA_RINGEND;
+ memset(skb, 0, sizeof(struct skb*)*num);
+}
+
+static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+ int num)
+{
+ int i;
+
+ memset(dma, 0, sizeof(struct adm5120_dma)*num);
+ for (i=0; i<num; i++) {
+ skb[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+ if (!skb[i]) {
+ i=num;
+ break;
+ }
+ skb_reserve(skb[i], 2);
+ dma[i].data = ADM5120_DMA_ADDR(skb[i]->data) | ADM5120_DMA_OWN;
+ dma[i].cntl = 0;
+ dma[i].len = ADM5120_DMA_RXSIZE;
+ dma[i].status = 0;
+ }
+ dma[i-1].data |= ADM5120_DMA_RINGEND;
+}
+
+static int __init adm5120_sw_init(void)
+{
+ int i, err;
+ struct net_device *dev;
+
+ err = request_irq(SW_IRQ, adm5120_sw_irq, 0, "ethernet switch", NULL);
+ if (err)
+ goto out;
+
+ /* MII port? */
+ if (adm5120_get_reg(ADM5120_CODE) & ADM5120_CODE_PQFP)
+ adm5120_nrdevs = 5;
+ /* CFE based devices only have two enet ports */
+ else if (adm5120_info.boot_loader == BOOT_LOADER_CFE)
+ adm5120_nrdevs = 2;
+ else
+ adm5120_nrdevs = 6;
+
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
+ ADM5120_DISUNALL | ADM5120_DISMCALL);
+ adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP);
+
+ adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
+ ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
+ adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
+ ADM5120_PHY_NTH);
+
+ adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+ adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
+
+ adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
+ adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
+ adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
+ adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
+
+ adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
+ adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
+ adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
+ adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
+ adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
+ adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
+ adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
+ adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
+
+ adm5120_set_vlan(vlan_matrix);
+
+ for (i=0; i<adm5120_nrdevs; i++) {
+ adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
+ if (!adm5120_devs[i]) {
+ err = -ENOMEM;
+ goto out_int;
+ }
+
+ dev = adm5120_devs[i];
+ SET_MODULE_OWNER(dev);
+ memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
+ ((struct adm5120_sw*)netdev_priv(dev))->port = i;
+ dev->base_addr = SW_BASE;
+ dev->irq = SW_IRQ;
+ dev->open = adm5120_sw_open;
+ dev->hard_start_xmit = adm5120_sw_tx;
+ dev->stop = adm5120_sw_stop;
+ dev->get_stats = adm5120_sw_stats;
+ dev->set_multicast_list = adm5120_set_multicast_list;
+ dev->do_ioctl = adm5120_do_ioctl;
+ dev->tx_timeout = adm5120_tx_timeout;
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+ dev->set_mac_address = adm5120_sw_set_mac_address;
+ /* HACK alert!!! In the original admtek driver it is asumed
+ that you can read the MAC addressess from flash, but edimax
+ decided to leave that space intentionally blank...
+ */
+ memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
+ dev->dev_addr[5] += i;
+ adm5120_write_mac(dev);
+
+ if ((err = register_netdev(dev))) {
+ free_netdev(dev);
+ goto out_int;
+ }
+ printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+ }
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+
+ return 0;
+
+out_int:
+ /* Undo everything that did succeed */
+ for (; i; i--) {
+ unregister_netdev(adm5120_devs[i-1]);
+ free_netdev(adm5120_devs[i-1]);
+ }
+ free_irq(SW_IRQ, NULL);
+out:
+ printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+ return err;
+}
+
+static void __exit adm5120_sw_exit(void)
+{
+ int i;
+
+ for (i = 0; i < adm5120_nrdevs; i++) {
+ unregister_netdev(adm5120_devs[i]);
+ free_netdev(adm5120_devs[i-1]);
+ }
+
+ free_irq(SW_IRQ, NULL);
+
+ for (i = 0; i < ADM5120_DMA_RXH; i++) {
+ if (!adm5120_skb_rxh[i])
+ break;
+ kfree_skb(adm5120_skb_rxh[i]);
+ }
+ for (i = 0; i < ADM5120_DMA_RXL; i++) {
+ if (!adm5120_skb_rxl[i])
+ break;
+ kfree_skb(adm5120_skb_rxl[i]);
+ }
+}
+
+module_init(adm5120_sw_init);
+module_exit(adm5120_sw_exit);
diff --git a/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h
new file mode 100644
index 000000000..19388a906
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h
@@ -0,0 +1,106 @@
+/*
+ * Defines for ADM5120 built in ethernet switch driver
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ * Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
+ * Copyright ADMtek Inc.
+ */
+
+#ifndef _INCLUDE_ADM5120SW_H_
+#define _INCLUDE_ADM5120SW_H_
+
+#define SW_BASE KSEG1ADDR(0x12000000)
+#define SW_DEVS 6
+#define SW_IRQ 9
+
+#define ETH_TX_TIMEOUT HZ/4
+#define ETH_FCS 4;
+
+#define ADM5120_CODE 0x00 /* CPU description */
+#define ADM5120_CODE_PQFP 0x20000000 /* package type */
+#define ADM5120_CPUP_CONF 0x24 /* CPU port config */
+#define ADM5120_DISCCPUPORT 0x00000001 /* disable cpu port */
+#define ADM5120_CRC_PADDING 0x00000002 /* software crc */
+#define ADM5120_DISUNSHIFT 9
+#define ADM5120_DISUNALL 0x00007e00 /* disable unknown from all */
+#define ADM5120_DISMCSHIFT 16
+#define ADM5120_DISMCALL 0x003f0000 /* disable multicast from all */
+#define ADM5120_PORT_CONF0 0x28
+#define ADM5120_ENMC 0x00003f00 /* Enable MC routing (ex cpu) */
+#define ADM5120_ENBP 0x003f0000 /* Enable Back Pressure */
+#define ADM5120_VLAN_GI 0x40 /* VLAN settings */
+#define ADM5120_VLAN_GII 0x44
+#define ADM5120_SEND_TRIG 0x48
+#define ADM5120_SEND_TRIG_L 0x00000001
+#define ADM5120_SEND_TRIG_H 0x00000002
+#define ADM5120_MAC_WT0 0x58
+#define ADM5120_MAC_WRITE 0x00000001
+#define ADM5120_MAC_WRITE_DONE 0x00000002
+#define ADM5120_VLAN_EN 0x00000040
+#define ADM5120_MAC_WT1 0x5c
+#define ADM5120_PHY_CNTL2 0x7c
+#define ADM5120_AUTONEG 0x0000001f /* Auto negotiate */
+#define ADM5120_NORMAL 0x01f00000 /* PHY normal mode */
+#define ADM5120_AUTOMDIX 0x3e000000 /* Auto MDIX */
+#define ADM5120_PHY_CNTL3 0x80
+#define ADM5120_PHY_NTH 0x00000400
+#define ADM5120_INT_ST 0xb0
+#define ADM5120_INT_RXH 0x0000004
+#define ADM5120_INT_RXL 0x0000008
+#define ADM5120_INT_HFULL 0x0000010
+#define ADM5120_INT_LFULL 0x0000020
+#define ADM5120_INT_TXH 0x0000001
+#define ADM5120_INT_TXL 0x0000002
+#define ADM5120_INT_MASK 0xb4
+#define ADM5120_INTMASKALL 0x1FDEFFF /* All interrupts */
+#define ADM5120_INTHANDLE (ADM5120_INT_RXH | ADM5120_INT_RXL | \
+ ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
+ ADM5120_INT_TXH | ADM5120_INT_TXL)
+#define ADM5120_SEND_HBADDR 0xd0
+#define ADM5120_SEND_LBADDR 0xd4
+#define ADM5120_RECEIVE_HBADDR 0xd8
+#define ADM5120_RECEIVE_LBADDR 0xdc
+
+struct adm5120_dma {
+ u32 data;
+ u32 cntl;
+ u32 len;
+ u32 status;
+} __attribute__ ((packed));
+
+#define ADM5120_DMA_MASK 0x01ffffff
+#define ADM5120_DMA_OWN 0x80000000 /* buffer owner */
+#define ADM5120_DMA_RINGEND 0x10000000 /* Last in DMA ring */
+
+#define ADM5120_DMA_ADDR(ptr) ((u32)(ptr) & ADM5120_DMA_MASK)
+#define ADM5120_DMA_PORTID 0x00007000
+#define ADM5120_DMA_PORTSHIFT 12
+#define ADM5120_DMA_LEN 0x07ff0000
+#define ADM5120_DMA_LENSHIFT 16
+#define ADM5120_DMA_FCSERR 0x00000008
+
+#define ADM5120_DMA_TXH 16
+#define ADM5120_DMA_TXL 64
+#define ADM5120_DMA_RXH 16
+#define ADM5120_DMA_RXL 8
+
+#define ADM5120_DMA_RXSIZE 1550
+#define ADM5120_DMA_EXTRA 20
+
+struct adm5120_sw {
+ int port;
+ struct net_device_stats stats;
+};
+
+#define SIOCSMATRIX SIOCDEVPRIVATE
+#define SIOCGMATRIX SIOCDEVPRIVATE+1
+#define SIOCGADMINFO SIOCDEVPRIVATE+2
+
+struct adm5120_sw_info {
+ u16 magic;
+ u16 ports;
+ u16 vlan;
+};
+
+#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c b/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c
new file mode 100644
index 000000000..6b4292867
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c
@@ -0,0 +1,524 @@
+/*
+ * Serial driver for ADM5120 SoC
+ *
+ * Derived from drivers/serial/uart00.c
+ * Copyright 2001 Altera Corporation
+ *
+ * Some pieces are derived from the ADMtek 2.4 serial driver.
+ * Copyright (C) ADMtek Incorporated, 2003
+ * daniell@admtek.com.tw
+ * Which again was derived from drivers/char/serial.c
+ * Copyright (C) Linus Torvalds et al.
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+
+#define ADM5120_UART_BASE0 0x12600000
+#define ADM5120_UART_BASE1 0x12800000
+#define ADM5120_UART_SIZE 0x20
+
+#define ADM5120_UART_IRQ0 1
+#define ADM5120_UART_IRQ1 2
+
+#define ADM5120_UART_REG(base, reg) \
+ (*(volatile u32 *)KSEG1ADDR((base)+(reg)))
+
+#define ADM5120_UARTCLK_FREQ 62500000
+#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
+
+#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200)
+
+#define ADM5120_UART_DATA 0x00
+#define ADM5120_UART_RS 0x04
+#define ADM5120_UART_LCR_H 0x08
+#define ADM5120_UART_LCR_M 0x0c
+#define ADM5120_UART_LCR_L 0x10
+#define ADM5120_UART_CR 0x14
+#define ADM5120_UART_FR 0x18
+#define ADM5120_UART_IR 0x1c
+
+#define ADM5120_UART_FE 0x01
+#define ADM5120_UART_PE 0x02
+#define ADM5120_UART_BE 0x04
+#define ADM5120_UART_OE 0x08
+#define ADM5120_UART_ERR 0x0f
+#define ADM5120_UART_FIFO_EN 0x10
+#define ADM5120_UART_EN 0x01
+#define ADM5120_UART_TIE 0x20
+#define ADM5120_UART_RIE 0x50
+#define ADM5120_UART_IE 0x78
+#define ADM5120_UART_CTS 0x01
+#define ADM5120_UART_DSR 0x02
+#define ADM5120_UART_DCD 0x04
+#define ADM5120_UART_TXFF 0x20
+#define ADM5120_UART_TXFE 0x80
+#define ADM5120_UART_RXFE 0x10
+#define ADM5120_UART_BRK 0x01
+#define ADM5120_UART_PEN 0x02
+#define ADM5120_UART_EPS 0x04
+#define ADM5120_UART_STP2 0x08
+#define ADM5120_UART_W5 0x00
+#define ADM5120_UART_W6 0x20
+#define ADM5120_UART_W7 0x40
+#define ADM5120_UART_W8 0x60
+#define ADM5120_UART_MIS 0x01
+#define ADM5120_UART_RIS 0x02
+#define ADM5120_UART_TIS 0x04
+#define ADM5120_UART_RTIS 0x08
+
+static void adm5120ser_stop_tx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
+}
+
+static void adm5120ser_irq_rx(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, rds, flg, ignored = 0;
+
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ while (!(status & ADM5120_UART_RXFE)) {
+ /*
+ * We need to read rds before reading the
+ * character from the fifo
+ */
+ rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
+ ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
+ port->icount.rx++;
+
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+
+ flg = TTY_NORMAL;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rds & ADM5120_UART_ERR)
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ error_return:
+ tty_insert_flip_char(tty, ch, flg);
+
+ ignore_char:
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ }
+ out:
+ tty_flip_buffer_push(tty);
+ return;
+
+ handle_error:
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
+ if (rds & ADM5120_UART_BE) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (rds & ADM5120_UART_PE)
+ port->icount.parity++;
+ else if (rds & ADM5120_UART_FE)
+ port->icount.frame++;
+ if (rds & ADM5120_UART_OE)
+ port->icount.overrun++;
+
+ if (rds & port->ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+ rds &= port->read_status_mask;
+
+ if (rds & ADM5120_UART_BE)
+ flg = TTY_BREAK;
+ else if (rds & ADM5120_UART_PE)
+ flg = TTY_PARITY;
+ else if (rds & ADM5120_UART_FE)
+ flg = TTY_FRAME;
+
+ if (rds & ADM5120_UART_OE) {
+ /*
+ * CHECK: does overrun affect the current character?
+ * ASSUMPTION: it does not.
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef CONFIG_MAGIC_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static void adm5120ser_irq_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ int count;
+
+ if (port->x_char) {
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+ port->x_char;
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ adm5120ser_stop_tx(port);
+ return;
+ }
+
+ count = port->fifosize >> 1;
+ do {
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+ xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ adm5120ser_stop_tx(port);
+}
+
+static void adm5120ser_irq_modem(struct uart_port *port)
+{
+ unsigned int status;
+
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+ if (status & ADM5120_UART_DCD)
+ uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
+
+ if (status & ADM5120_UART_DSR)
+ port->icount.dsr++;
+
+ if (status & ADM5120_UART_CTS)
+ uart_handle_cts_change(port, status & ADM5120_UART_CTS);
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
+
+ if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
+ adm5120ser_irq_rx(port);
+ if (ir & ADM5120_UART_TIS)
+ adm5120ser_irq_tx(port);
+ if (ir & ADM5120_UART_MIS) {
+ adm5120ser_irq_modem(port);
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int adm5120ser_tx_empty(struct uart_port *port)
+{
+ unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
+}
+
+static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+ if (fr & ADM5120_UART_CTS)
+ result |= TIOCM_CTS;
+ if (fr & ADM5120_UART_DSR)
+ result |= TIOCM_DSR;
+ if (fr & ADM5120_UART_DCD)
+ result |= TIOCM_CAR;
+ return result;
+}
+
+static void adm5120ser_start_tx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
+}
+
+static void adm5120ser_stop_rx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
+}
+
+static void adm5120ser_enable_ms(struct uart_port *port)
+{
+}
+
+static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned long lcrh;
+
+ spin_lock_irqsave(&port->lock, flags);
+ lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
+ if (break_state == -1)
+ lcrh |= ADM5120_UART_BRK;
+ else
+ lcrh &= ~ADM5120_UART_BRK;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adm5120ser_startup(struct uart_port *port)
+{
+ int ret;
+
+ ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
+ if (ret) {
+ printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
+ return ret;
+ }
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
+ ADM5120_UART_FIFO_EN;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
+ ADM5120_UART_EN | ADM5120_UART_IE;
+ return 0;
+}
+
+static void adm5120ser_shutdown(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
+ free_irq(port->irq, port);
+}
+
+static void adm5120ser_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ unsigned int baud, quot, lcrh;
+ unsigned long flags;
+
+ termios->c_cflag |= CREAD;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ lcrh = ADM5120_UART_FIFO_EN;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcrh |= ADM5120_UART_W5;
+ break;
+ case CS6:
+ lcrh |= ADM5120_UART_W6;
+ break;
+ case CS7:
+ lcrh |= ADM5120_UART_W7;
+ break;
+ default:
+ lcrh |= ADM5120_UART_W8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ lcrh |= ADM5120_UART_STP2;
+ if (termios->c_cflag & PARENB) {
+ lcrh |= ADM5120_UART_PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcrh |= ADM5120_UART_EPS;
+ }
+
+ spin_lock_irqsave(port->lock, flags);
+
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = ADM5120_UART_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ADM5120_UART_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= ADM5120_UART_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ADM5120_UART_OE;
+ }
+
+ quot = ADM5120_UART_BAUD115200;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *adm5120ser_type(struct uart_port *port)
+{
+ return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
+}
+
+static void adm5120ser_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_ADM5120;
+}
+
+static void adm5120ser_release_port(struct uart_port *port)
+{
+ release_mem_region(port->iobase, ADM5120_UART_SIZE);
+}
+
+static int adm5120ser_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->iobase, ADM5120_UART_SIZE,
+ "adm5120-uart") != NULL ? 0 : -EBUSY;
+}
+
+static struct uart_ops adm5120ser_ops = {
+ .tx_empty = adm5120ser_tx_empty,
+ .set_mctrl = adm5120ser_set_mctrl,
+ .get_mctrl = adm5120ser_get_mctrl,
+ .stop_tx = adm5120ser_stop_tx,
+ .start_tx = adm5120ser_start_tx,
+ .stop_rx = adm5120ser_stop_rx,
+ .enable_ms = adm5120ser_enable_ms,
+ .break_ctl = adm5120ser_break_ctl,
+ .startup = adm5120ser_startup,
+ .shutdown = adm5120ser_shutdown,
+ .set_termios = adm5120ser_set_termios,
+ .type = adm5120ser_type,
+ .config_port = adm5120ser_config_port,
+ .release_port = adm5120ser_release_port,
+ .request_port = adm5120ser_request_port,
+};
+
+static void adm5120console_put(const char c)
+{
+ while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
+ ADM5120_UART_TXFF) != 0);
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
+}
+
+static void adm5120console_write(struct console *con, const char *s,
+ unsigned int count)
+{
+ while (count--) {
+ if (*s == '\n')
+ adm5120console_put('\r');
+ adm5120console_put(*s);
+ s++;
+ }
+}
+
+static int __init adm5120console_setup(struct console *con, char *options)
+{
+ /* Set to 115200 baud, 8N1 and enable FIFO */
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
+ ADM5120_UART_BAUD115200 & 0xff;
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
+ ADM5120_UART_BAUD115200 >> 8;
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
+ ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
+ /* Enable port */
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
+ ADM5120_UART_EN;
+
+ return 0;
+}
+
+static struct uart_driver adm5120ser_reg;
+
+static struct console adm5120_serconsole = {
+ .name = "ttyS",
+ .write = adm5120console_write,
+ .device = uart_console_device,
+ .setup = adm5120console_setup,
+ .flags = CON_PRINTBUFFER,
+ .cflag = B115200 | CS8 | CREAD,
+ .index = 0,
+ .data = &adm5120ser_reg,
+};
+
+static int __init adm5120console_init(void)
+{
+ register_console(&adm5120_serconsole);
+ return 0;
+}
+
+console_initcall(adm5120console_init);
+
+
+static struct uart_port adm5120ser_ports[] = {
+ {
+ .iobase = ADM5120_UART_BASE0,
+ .irq = ADM5120_UART_IRQ0,
+ .uartclk = ADM5120_UARTCLK_FREQ,
+ .fifosize = 16,
+ .ops = &adm5120ser_ops,
+ .line = 0,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+#if (CONFIG_ADM5120_NR_UARTS > 1)
+ {
+ .iobase = ADM5120_UART_BASE1,
+ .irq = ADM5120_UART_IRQ1,
+ .uartclk = ADM5120_UARTCLK_FREQ,
+ .fifosize = 16,
+ .ops = &adm5120ser_ops,
+ .line = 1,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+#endif
+};
+
+static struct uart_driver adm5120ser_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyS",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = CONFIG_ADM5120_NR_UARTS,
+ .cons = &adm5120_serconsole,
+};
+
+static int __init adm5120ser_init(void)
+{
+ int ret, i;
+
+ ret = uart_register_driver(&adm5120ser_reg);
+ if (!ret) {
+ for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
+ uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
+ }
+
+ return ret;
+}
+
+__initcall(adm5120ser_init);
diff --git a/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c b/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c
new file mode 100644
index 000000000..b4a1899d1
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c
@@ -0,0 +1,790 @@
+/*
+ * HCD driver for ADM5120 SoC
+ *
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * Based on the ADMtek 2.4 driver
+ * (C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
+ * Which again was based on the ohci and uhci drivers.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+
+#include "../core/hcd.h"
+
+MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+
+#define ADMHCD_REG_CONTROL 0x00
+#define ADMHCD_REG_INTSTATUS 0x04
+#define ADMHCD_REG_INTENABLE 0x08
+#define ADMHCD_REG_HOSTCONTROL 0x10
+#define ADMHCD_REG_FMINTERVAL 0x18
+#define ADMHCD_REG_FMNUMBER 0x1c
+#define ADMHCD_REG_LSTHRESH 0x70
+#define ADMHCD_REG_RHDESCR 0x74
+#define ADMHCD_REG_PORTSTATUS0 0x78
+#define ADMHCD_REG_PORTSTATUS1 0x7c
+#define ADMHCD_REG_HOSTHEAD 0x80
+
+
+#define ADMHCD_NUMPORTS 2
+
+#define ADMHCD_HOST_EN 0x00000001 /* Host enable */
+#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
+#define ADMHCD_SW_RESET 0x00000008 /* Reset */
+
+#define ADMHCD_INT_TD 0x00100000 /* TD completed */
+#define ADMHCD_INT_SW 0x20000000 /* software interrupt */
+#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
+#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */
+
+#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */
+#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */
+#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */
+#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */
+#define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */
+
+#define ADMHCD_NPS 0x00000020 /* No Power Switch */
+#define ADMHCD_LPSC 0x04000000 /* Local power switch change */
+
+#define ADMHCD_CCS 0x00000001 /* current connect status */
+#define ADMHCD_PES 0x00000002 /* port enable status */
+#define ADMHCD_PSS 0x00000004 /* port suspend status */
+#define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */
+#define ADMHCD_PRS 0x00000010 /* port reset status */
+#define ADMHCD_PPS 0x00000100 /* port power status */
+#define ADMHCD_LSDA 0x00000200 /* low speed device attached */
+#define ADMHCD_CSC 0x00010000 /* connect status change */
+#define ADMHCD_PESC 0x00020000 /* enable status change */
+#define ADMHCD_PSSC 0x00040000 /* suspend status change */
+#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/
+#define ADMHCD_PRSC 0x00100000 /* reset status change */
+
+
+struct admhcd_ed {
+ /* Don't change first four, they used for DMA */
+ u32 control;
+ struct admhcd_td *tail;
+ struct admhcd_td *head;
+ struct admhcd_ed *next;
+ /* the rest is for the driver only: */
+ struct admhcd_td *cur;
+ struct usb_host_endpoint *ep;
+ struct urb *urb;
+ struct admhcd_ed *real;
+} __attribute__ ((packed));
+
+#define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */
+#define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */
+#define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */
+#define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */
+#define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */
+#define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */
+
+struct admhcd_td {
+ /* Don't change first four, they are used for DMA */
+ u32 control;
+ u32 buffer;
+ u32 buflen;
+ struct admhcd_td *next;
+ /* the rest is for the driver only: */
+ struct urb *urb;
+ struct admhcd_td *real;
+} __attribute__ ((packed));
+
+#define ADMHCD_TD_OWN 0x80000000
+#define ADMHCD_TD_TOGGLE 0x00000000
+#define ADMHCD_TD_DATA0 0x01000000
+#define ADMHCD_TD_DATA1 0x01800000
+#define ADMHCD_TD_OUT 0x00200000
+#define ADMHCD_TD_IN 0x00400000
+#define ADMHCD_TD_SETUP 0x00000000
+#define ADMHCD_TD_ISO 0x00010000
+#define ADMHCD_TD_R 0x00040000
+#define ADMHCD_TD_INTEN 0x00010000
+
+static int admhcd_td_err[16] = {
+ 0, /* No */
+ -EREMOTEIO, /* CRC */
+ -EREMOTEIO, /* bit stuff */
+ -EREMOTEIO, /* data toggle */
+ -EPIPE, /* stall */
+ -ETIMEDOUT, /* timeout */
+ -EPROTO, /* pid err */
+ -EPROTO, /* unexpected pid */
+ -EREMOTEIO, /* data overrun */
+ -EREMOTEIO, /* data underrun */
+ -ETIMEDOUT, /* 1010 */
+ -ETIMEDOUT, /* 1011 */
+ -EREMOTEIO, /* buffer overrun */
+ -EREMOTEIO, /* buffer underrun */
+ -ETIMEDOUT, /* 1110 */
+ -ETIMEDOUT, /* 1111 */
+};
+
+#define ADMHCD_TD_ERRMASK 0x38000000
+#define ADMHCD_TD_ERRSHIFT 27
+
+#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~0xf))
+#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
+
+struct admhcd {
+ u32 base;
+ u32 dma_en;
+ spinlock_t lock;
+ unsigned long flags;
+};
+
+#define hcd_to_admhcd(hcd) ((struct admhcd *)(hcd)->hcd_priv)
+
+static char hcd_name[] = "adm5120-hcd";
+
+static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
+{
+ return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
+}
+
+static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
+{
+ *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
+}
+
+static void admhcd_lock(struct admhcd *ahcd)
+{
+ spin_lock_irqsave(&ahcd->lock, ahcd->flags);
+ ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
+ ADMHCD_DMA_EN;
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+}
+
+static void admhcd_unlock(struct admhcd *ahcd)
+{
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
+ ADMHCD_STATE_OP | ahcd->dma_en);
+ spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
+}
+
+static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
+{
+ struct admhcd_td *tdn, *td;
+
+ tdn = kmalloc(sizeof(struct admhcd_td), GFP_ATOMIC);
+ if (!tdn)
+ return NULL;
+ tdn->real = tdn;
+ tdn = (struct admhcd_td *)KSEG1ADDR(tdn);
+ memset(tdn, 0, sizeof(struct admhcd_td));
+ if (ed->cur == NULL) {
+ ed->cur = tdn;
+ ed->head = tdn;
+ ed->tail = tdn;
+ td = tdn;
+ } else {
+ /* Supply back the old tail and link in new td as tail */
+ td = TD(ed->tail);
+ TD(ed->tail)->next = tdn;
+ ed->tail = tdn;
+ }
+ td->urb = urb;
+
+ return td;
+}
+
+static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
+{
+ struct admhcd_td *td, **tdp;
+
+ if (urb == NULL)
+ ed->control |= ADMHCD_ED_SKIP;
+ tdp = &ed->cur;
+ td = ed->cur;
+ do {
+ if (td->urb == urb)
+ break;
+ tdp = &td->next;
+ td = TD(td->next);
+ } while (td);
+ while (td && td->urb == urb) {
+ *tdp = TD(td->next);
+ kfree(td->real);
+ td = *tdp;
+ }
+}
+
+/* Find an endpoint's descriptor, if needed allocate a new one and link it
+ in the DMA chain
+ */
+static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
+ struct usb_host_endpoint *ep, struct urb *urb)
+{
+ struct admhcd_ed *hosthead;
+ struct admhcd_ed *found = NULL, *ed = NULL;
+ unsigned int pipe = urb->pipe;
+
+ admhcd_lock(ahcd);
+ hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ if (hosthead) {
+ for (ed = hosthead;; ed = ED(ed->next)) {
+ if (ed->ep == ep) {
+ found = ed;
+ break;
+ }
+ if (ED(ed->next) == hosthead)
+ break;
+ }
+ }
+ if (!found) {
+ found = kmalloc(sizeof(struct admhcd_ed), GFP_ATOMIC);
+ if (!found)
+ goto out;
+ memset(found, 0, sizeof(struct admhcd_ed));
+ found->real = found;
+ found->ep = ep;
+ found = (struct admhcd_ed *)KSEG1ADDR(found);
+ found->control = usb_pipedevice(pipe) |
+ (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
+ (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
+ (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
+ (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
+ (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
+ /* Alloc first dummy td */
+ admhcd_td_alloc(found, NULL);
+ if (hosthead) {
+ found->next = hosthead;
+ ed->next = found;
+ } else {
+ found->next = found;
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
+ }
+ }
+out:
+ admhcd_unlock(ahcd);
+ return found;
+}
+
+static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
+ dma_addr_t data, int len)
+{
+ td->buffer = data;
+ td->buflen = len;
+ td->control = control;
+ return TD(td->next);
+}
+
+static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
+{
+ struct admhcd_td *td = ed->cur;
+
+ if (ed->urb)
+ return;
+ if (td->urb) {
+ ed->urb = td->urb;
+ while (1) {
+ td->control |= ADMHCD_TD_OWN;
+ if (TD(td->next)->urb != td->urb) {
+ td->buflen |= ADMHCD_TD_INTEN;
+ break;
+ }
+ td = TD(td->next);
+ }
+ }
+ ed->head = TD(ed->head);
+ ahcd->dma_en |= ADMHCD_DMA_EN;
+}
+
+static irqreturn_t adm5120hcd_irq(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct usb_hcd *hcd = (struct usb_hcd *)ptr;
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ u32 intstatus;
+
+ intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
+ if (intstatus & ADMHCD_INT_FATAL) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
+ //
+ }
+ if (intstatus & ADMHCD_INT_SW) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
+ //
+ }
+ if (intstatus & ADMHCD_INT_TD) {
+ struct admhcd_ed *ed, *head;
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
+
+ head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ ed = head;
+ if (ed) do {
+ /* Is it a finished TD? */
+ if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
+ struct admhcd_td *td;
+ int error;
+
+ td = ed->cur;
+ error = (td->control & ADMHCD_TD_ERRMASK) >>
+ ADMHCD_TD_ERRSHIFT;
+ ed->urb->status = admhcd_td_err[error];
+ admhcd_td_free(ed, ed->urb);
+ // Calculate real length!!!
+ ed->urb->actual_length = ed->urb->transfer_buffer_length;
+ ed->urb->hcpriv = NULL;
+ usb_hcd_giveback_urb(hcd, ed->urb);
+ ed->urb = NULL;
+ }
+ admhcd_ed_start(ahcd, ed);
+ ed = ED(ed->next);
+ } while (ed != head);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
+ struct urb *urb, int mem_flags)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed;
+ struct admhcd_td *td;
+ int size = 0, i, zero = 0, ret = 0;
+ unsigned int pipe = urb->pipe, toggle = 0;
+ dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
+ int data_len = urb->transfer_buffer_length;
+
+ ed = admhcd_get_ed(ahcd, ep, urb);
+ if (!ed)
+ return -ENOMEM;
+
+ switch(usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ size = 2;
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ default:
+ size += urb->transfer_buffer_length / 4096;
+ if (urb->transfer_buffer_length % 4096)
+ size++;
+ if (size == 0)
+ size++;
+ else if (urb->transfer_flags & URB_ZERO_PACKET &&
+ !(urb->transfer_buffer_length %
+ usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
+ size++;
+ zero = 1;
+ }
+ break;
+ case PIPE_ISOCHRONOUS:
+ size = urb->number_of_packets;
+ break;
+ }
+
+ admhcd_lock(ahcd);
+ /* Remember the first td */
+ td = admhcd_td_alloc(ed, urb);
+ if (!td) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ /* Allocate additionall tds first */
+ for (i = 1; i < size; i++) {
+ if (admhcd_td_alloc(ed, urb) == NULL) {
+ admhcd_td_free(ed, urb);
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+
+ if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
+ toggle = ADMHCD_TD_TOGGLE;
+ else {
+ toggle = ADMHCD_TD_DATA0;
+ usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
+ usb_pipeout(pipe), 1);
+ }
+
+ switch(usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
+ td, (dma_addr_t)urb->setup_packet, 8);
+ while (data_len > 0) {
+ td = admhcd_td_fill(ADMHCD_TD_DATA1
+ | ADMHCD_TD_R |
+ (usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
+ data, data_len % 4097);
+ data_len -= 4096;
+ }
+ admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
+ ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
+ data, 0);
+ break;
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ //info ok for interrupt?
+ i = 0;
+ while(data_len > 4096) {
+ td = admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT :
+ ADMHCD_TD_IN | ADMHCD_TD_R) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td,
+ data, 4096);
+ data += 4096;
+ data_len -= 4096;
+ i++;
+ }
+ td = admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
+ i++;
+ if (zero)
+ admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
+ break;
+ case PIPE_ISOCHRONOUS:
+ for (i = 0; i < urb->number_of_packets; i++) {
+ td = admhcd_td_fill(ADMHCD_TD_ISO |
+ ((urb->start_frame + i) & 0xffff), td,
+ data + urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length);
+ }
+ break;
+ }
+ urb->hcpriv = ed;
+ admhcd_ed_start(ahcd, ed);
+out:
+ admhcd_unlock(ahcd);
+ return ret;
+}
+
+static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed;
+
+ admhcd_lock(ahcd);
+
+ ed = urb->hcpriv;
+ if (ed && ed->urb != urb)
+ admhcd_td_free(ed, urb);
+
+ admhcd_unlock(ahcd);
+ return 0;
+}
+
+static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed, *edt, *head;
+
+ admhcd_lock(ahcd);
+
+ head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ if (!head)
+ goto out;
+ for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
+ if (ed->ep == ep)
+ break;
+ if (ed->ep != ep)
+ goto out;
+ while (ed->cur)
+ admhcd_td_free(ed, ed->cur->urb);
+ if (head == ed) {
+ if (ED(ed->next) == ed) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
+ ahcd->dma_en = 0;
+ goto out_free;
+ }
+ head = ED(ed->next);
+ for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
+ edt->next = ED(ed->next);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
+ goto out_free;
+ }
+ for (edt = head; edt->next != ed; edt = edt->next);
+ edt->next = ed->next;
+out_free:
+ kfree(ed->real);
+out:
+ admhcd_unlock(ahcd);
+}
+
+static int admhcd_get_frame_number(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+ return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
+}
+
+static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int port;
+
+ *buf = 0;
+ for (port = 0; port < ADMHCD_NUMPORTS; port++) {
+ if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
+ (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
+ ADMHCD_PRSC))
+ *buf |= (1 << (port + 1));
+ }
+ return !!*buf;
+}
+
+static __u8 root_hub_hub_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x0a, 0x00, /* __u16 wHubCharacteristics; */
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0mA */
+ 0x00, /* __u8 DeviceRemovable; */
+ 0xff, /* __u8 PortPwrCtrlMask; */
+};
+
+static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int retval = 0, len;
+ unsigned int port = wIndex -1;
+
+ switch (typeReq) {
+
+ case GetHubStatus:
+ *(__le32 *)buf = cpu_to_le32(0);
+ break;
+ case GetPortStatus:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+ *(__le32 *)buf = cpu_to_le32(
+ admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
+ break;
+ case SetHubFeature: /* We don't implement these */
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto err;
+ }
+ case SetPortFeature:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PSS);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
+ & ADMHCD_CCS) {
+ admhcd_reg_set(ahcd,
+ ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PRS | ADMHCD_CSC);
+ mdelay(50);
+ admhcd_reg_set(ahcd,
+ ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PES | ADMHCD_CSC);
+ }
+ break;
+ case USB_PORT_FEAT_POWER:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PPS);
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case ClearPortFeature:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_CCS);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PESC);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_POCI);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PSSC);
+ case USB_PORT_FEAT_POWER:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_LSDA);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_CSC);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_OCIC);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PRSC);
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case GetHubDescriptor:
+ len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+ memcpy(buf, root_hub_hub_des, len);
+ break;
+ default:
+err:
+ retval = -EPIPE;
+ }
+
+ return retval;
+}
+
+static struct hc_driver adm5120_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "ADM5120 HCD",
+ .hcd_priv_size = sizeof(struct admhcd),
+ .flags = HCD_USB11,
+ .urb_enqueue = admhcd_urb_enqueue,
+ .urb_dequeue = admhcd_urb_dequeue,
+ .endpoint_disable = admhcd_endpoint_disable,
+ .get_frame_number = admhcd_get_frame_number,
+ .hub_status_data = admhcd_hub_status_data,
+ .hub_control = admhcd_hub_control,
+};
+
+static int __init adm5120hcd_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct admhcd *ahcd;
+ struct usb_device *udev;
+ int err = 0;
+
+ if (!request_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start, hcd_name)) {
+ pr_debug("couldn't request mem\n");
+ err = -EBUSY;
+ goto out;
+ }
+
+ //hcd = usb_create_hcd(&adm5120_hc_driver, pdev, pdev->bus_id);
+ if (!hcd)
+ goto out_mem;
+
+ ahcd = hcd_to_admhcd(hcd);
+ dev_set_drvdata(pdev, ahcd);
+ hcd->self.controller = pdev;
+ //hcd->self.bus_name = pdev->bus_id;
+ hcd->irq = pdev->resource[1].start;
+ hcd->regs = (void *)pdev->resource[0].start;
+ hcd->product_desc = hcd_name;
+ ahcd->base = pdev->resource[0].start;
+
+ if (request_irq(pdev->resource[1].start, adm5120hcd_irq, 0, hcd_name,
+ hcd)) {
+ pr_debug("couldn't request irq\n");
+ err = -EBUSY;
+ goto out_hcd;
+ }
+
+ //err = usb_register_bus(&hcd->self);
+ //if (err < 0)
+ // goto out_irq;
+
+ spin_lock_init(&ahcd->lock);
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+ mdelay(10);
+ admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+ while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)
+ mdelay(1);
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
+ admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
+ admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE,
+ ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS,
+ ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+ admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+
+ udev = usb_alloc_dev(NULL, &hcd->self, 0);
+ if (!udev) {
+ err = -ENOMEM;
+ goto out_bus;
+ }
+
+ udev->speed = USB_SPEED_FULL;
+ hcd->state = HC_STATE_RUNNING;
+
+ //err = hcd_register_root(udev, hcd);
+ //if (err != 0) {
+ // usb_put_dev(udev);
+ // goto out_dev;
+ //}
+
+ return 0;
+
+out_dev:
+ usb_put_dev(udev);
+out_bus:
+ //usb_deregister_bus(&hcd->self);
+out_irq:
+ free_irq(pdev->resource[1].start, hcd);
+out_hcd:
+ usb_put_hcd(hcd);
+out_mem:
+ release_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start);
+out:
+ return err;
+}
+
+static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
+{
+ device_init_wakeup(&pdev->dev, 0);
+}
+
+static struct platform_driver adm5120hcd_driver = {
+ .probe = adm5120hcd_probe,
+ .remove = adm5120hcd_remove,
+ .driver = {
+ .name = "adm5120-hcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init adm5120hcd_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ return platform_driver_register(&adm5120hcd_driver);
+}
+
+static void __exit adm5120hcd_exit(void)
+{
+ platform_driver_unregister(&adm5120hcd_driver);
+}
+
+module_init(adm5120hcd_init);
+module_exit(adm5120hcd_exit);
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h
new file mode 100644
index 000000000..36979c225
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h
@@ -0,0 +1,60 @@
+/*
+ * $Id$
+ *
+ * ADM5120 SoC definitions
+ *
+ * This file defines some constants specific to the ADM5120 SoC
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _ADM5120_DEFS_H
+#define _ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE 0x00000000
+#define ADM5120_SDRAM1_BASE 0x01000000
+#define ADM5120_SRAM1_BASE 0x10000000
+#define ADM5120_MPMC_BASE 0x11000000
+#define ADM5120_USBC_BASE 0x11200000
+#define ADM5120_PCIMEM_BASE 0x11400000
+#define ADM5120_PCIIO_BASE 0x11500000
+#define ADM5120_PCICFG_ADDR 0x115FFFF0
+#define ADM5120_PCICFG_DATA 0x115FFFF8
+#define ADM5120_SWITCH_BASE 0x12000000
+#define ADM5120_INTC_BASE 0x12200000
+#define ADM5120_UART0_BASE 0x12600000
+#define ADM5120_UART1_BASE 0x12800000
+#define ADM5120_SRAM0_BASE 0x1FC00000
+
+#define ADM5120_MPMC_SIZE 0x1000
+#define ADM5120_USBC_SIZE 0x84
+#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
+#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE)
+#define ADM5120_PCICFG_SIZE 0x10
+#define ADM5120_SWITCH_SIZE 0x114
+#define ADM5120_INTC_SIZE 0x28
+#define ADM5120_UART_SIZE 0x20
+
+#define ADM5120_CLK_175 175000000
+#define ADM5120_CLK_200 200000000
+#define ADM5120_CLK_225 225000000
+#define ADM5120_CLK_250 250000000
+
+#define ADM5120_UART_CLOCK 62500000
+
+#endif /* _ADM5120_DEFS_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
new file mode 100644
index 000000000..df1f24d3a
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
@@ -0,0 +1,70 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _ADM5120_INFO_H
+#define _ADM5120_INFO_H
+
+#include <linux/types.h>
+
+struct adm5120_info {
+ unsigned int product_code;
+ unsigned int revision;
+ unsigned int cpu_package;
+ unsigned int nand_boot;
+ unsigned long cpu_speed;
+ unsigned int boot_loader;
+ unsigned int board_type;
+ unsigned int num_iface;
+};
+
+#define CPU_SPEED_175 175000000
+#define CPU_SPEED_200 200000000
+#define CPU_SPEED_225 225000000
+#define CPU_SPEED_250 250000000
+
+#define CPU_PACKAGE_PQFP 0
+#define CPU_PACKAGE_BGA 1
+
+#define BOOT_LOADER_UNKNOWN 0
+#define BOOT_LOADER_CFE 1
+#define BOOT_LOADER_UBOOT 2
+#define BOOT_LOADER_MYLOADER 3
+#define BOOT_LOADER_ROUTERBOOT 4
+#define BOOT_LOADER_LAST 4
+
+#define BOARD_TYPE_UNKNOWN 0
+#define BOARD_TYPE_WP54G_WRT 1
+#define BOARD_TYPE_WP54G 2
+#define BOARD_TYPE_WP54AG 3
+#define BOARD_TYPE_WPP54G 4
+#define BOARD_TYPE_WPP54AG 5
+#define BOARD_TYPE_NP28G 6
+#define BOARD_TYPE_NP28GHS 7
+#define BOARD_TYPE_NP27G 8
+#define BOARD_TYPE_WP54Gv1C 9
+#define BOARD_TYPE_RB_111 10
+#define BOARD_TYPE_RB_112 11
+#define BOARD_TYPE_RB_133 12
+#define BOARD_TYPE_RB_133C 13
+#define BOARD_TYPE_RB_150 14
+#define BOARD_TYPE_RB_153 15
+#define BOART_TYPE_LAST 15
+
+extern struct adm5120_info adm5120_info;
+extern void adm5120_info_init(void);
+
+static inline int adm5120_has_pci(void)
+{
+ return (adm5120_info.cpu_package == CPU_PACKAGE_BGA);
+}
+
+#endif /* _ADM5120_INFO_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h
new file mode 100644
index 000000000..52ea79e7a
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -0,0 +1,89 @@
+/*
+ * ADM5120 ethernet switch definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in Ethernet switch.
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_SWITCH_H
+#define _ADM5120_SWITCH_H
+
+#define BITMASK(len) ((1 << (len))-1)
+#define ONEBIT(at) (1 << (at))
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE 0x0000
+#define SWITCH_REG_SOFT_RESET 0x0004
+#define SWITCH_REG_MEMCTRL 0x001C
+#define SWITCH_REG_CPUP_CONF 0x0024
+#define SWITCH_REG_PORT_CONF0 0x0028
+#define SWITCH_REG_PORT_CONF1 0x002C
+#define SWITCH_REG_PORT_CONF2 0x0030
+#define SWITCH_REG_VLAN_G1 0x0040
+#define SWITCH_REG_VLAN_G2 0x0044
+#define SWITCH_REG_SEND_TRIG 0x0048
+#define SWITCH_REG_MAC_WT0 0x0058
+#define SWITCH_REG_MAC_WT1 0x005C
+#define SWITCH_REG_PHY_CNTL0 0x0068
+#define SWITCH_REG_PHY_CNTL1 0x006C
+#define SWITCH_REG_PHY_CNTL2 0x007C
+#define SWITCH_REG_PHY_CNTL3 0x0080
+#define SWITCH_REG_PRI_CNTL 0x0084
+#define SWITCH_REG_INT_STATUS 0x00B0
+#define SWITCH_REG_INT_MASK 0x00B4
+#define SWITCH_REG_GPIO_CONF0 0x00B8
+#define SWITCH_REG_GPIO_CONF2 0x00BC
+#define SWITCH_REG_WDOG0 0x00C0
+#define SWITCH_REG_WDOG1 0x00C4
+#define SWITCH_REG_PHY_CNTL4 0x00A0
+
+#define SWITCH_REG_SEND_HBADDR 0x00D0
+#define SWITCH_REG_SEND_LBADDR 0x00D4
+#define SWITCH_REG_RECV_HBADDR 0x00D8
+#define SWITCH_REG_RECV_LBADDR 0x00DC
+
+#define SWITCH_REG_TIMER_INT 0x00F0
+#define SWITCH_REG_TIMER 0x00F4
+
+#define SWITCH_REG_PORT0_LED 0x0100
+#define SWITCH_REG_PORT1_LED 0x0104
+#define SWITCH_REG_PORT2_LED 0x0108
+#define SWITCH_REG_PORT3_LED 0x010C
+#define SWITCH_REG_PORT4_LED 0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK BITMASK(16) /* Product Code */
+#define CODE_REV_SHIFT 16
+#define CODE_REV_MASK BITMASK(4) /* Product Revision */
+#define CODE_CLKS_SHIFT 20
+#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
+#define CODE_CLKS_175 0 /* 175 MHz */
+#define CODE_CLKS_200 1 /* 200 MHz */
+#define CODE_CLKS_225 2 /* 225 MHz */
+#define CODE_CLKS_250 3 /* 250 MHz */
+#define CODE_NAB ONEBIT(24) /* NAND boot */
+#define CODE_PK_MASK BITMASK(1) /* Package type */
+#define CODE_PK_SHIFT 29
+#define CODE_PK_BGA 0 /* BGA package */
+#define CODE_PK_PQFP 1 /* PQFP package */
+
+
+#endif /* _ADM5120_SWITCH_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h
new file mode 100644
index 000000000..3c0c6021b
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2006,2007 Gabor Juhos
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ * <header>
+ * [<block descriptor 0>]
+ * ...
+ * [<block descriptor n>]
+ * <null block descriptor>
+ * [<block data 0>]
+ * ...
+ * [<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE 0x4C594D00
+#define MYLO_MAGIC_20021103 0x20021103
+#define MYLO_MAGIC_20021107 0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
+#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX 0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G 0x0078
+#define DEVID_COMPEX_NP28G 0x044C
+#define DEVID_COMPEX_NP28GHS 0x044E
+#define DEVID_COMPEX_WP54Gv1C 0x0514
+#define DEVID_COMPEX_WP54G 0x0515
+#define DEVID_COMPEX_WP54AG 0x0546
+#define DEVID_COMPEX_WPP54AG 0x0550
+#define DEVID_COMPEX_WPP54G 0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18 0x047E
+#define DEVID_COMPEX_NP18A 0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M 0x03E8
+#define DEVID_COMPEX_NP26G16M 0x03E9
+
+struct mylo_fw_header {
+ uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
+ uint32_t crc; /* CRC of the whole firmware */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint16_t vid; /* vendor ID */
+ uint16_t did; /* device ID */
+ uint16_t svid; /* sub vendor ID */
+ uint16_t sdid; /* sub device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi; /* FIXME: firmware version high? */
+ uint32_t fwlo; /* FIXME: firmware version low? */
+ uint32_t flags; /* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+ uint32_t type; /* block type */
+ uint32_t addr; /* relative address to flash start */
+ uint32_t dlen; /* size of block data in bytes */
+ uint32_t blen; /* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED 0
+#define FW_DESC_TYPE_USED 1
+
+struct mylo_partition {
+ uint16_t flags; /* partition flags */
+ uint16_t type; /* type of the partition */
+ uint32_t addr; /* relative address of the partition from the
+ flash start */
+ uint32_t size; /* size of the partition in bytes */
+ uint32_t param; /* if this is the active partition, the
+ MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
+ * MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
+ * before decompression */
+#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE 0
+#define PARTITION_TYPE_USED 1
+
+#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
+ partition table */
+
+struct mylo_partition_table {
+ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint32_t res2; /* unknown/unused */
+ struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+ uint32_t len; /* length of the partition data */
+ uint32_t crc; /* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t mylo_ver;
+ uint16_t vid; /* Vendor ID */
+ uint16_t did; /* Device ID */
+ uint16_t svid; /* Sub Vendor ID */
+ uint16_t sdid; /* Sub Device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi;
+ uint32_t fwlo;
+ uint32_t tftp_addr;
+ uint32_t prog_start;
+ uint32_t flash_size; /* Size of boot FLASH in bytes */
+ uint32_t dram_size; /* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+ uint8_t mac[6];
+ uint8_t csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
+ in the board parameters */
+
+struct mylo_board_params {
+ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t res2;
+ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/