diff options
Diffstat (limited to 'target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120')
4 files changed, 0 insertions, 386 deletions
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h deleted file mode 100644 index 36979c225..000000000 --- a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * $Id$ - * - * ADM5120 SoC definitions - * - * This file defines some constants specific to the ADM5120 SoC - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ -#ifndef _ADM5120_DEFS_H -#define _ADM5120_DEFS_H - -#define ADM5120_SDRAM0_BASE 0x00000000 -#define ADM5120_SDRAM1_BASE 0x01000000 -#define ADM5120_SRAM1_BASE 0x10000000 -#define ADM5120_MPMC_BASE 0x11000000 -#define ADM5120_USBC_BASE 0x11200000 -#define ADM5120_PCIMEM_BASE 0x11400000 -#define ADM5120_PCIIO_BASE 0x11500000 -#define ADM5120_PCICFG_ADDR 0x115FFFF0 -#define ADM5120_PCICFG_DATA 0x115FFFF8 -#define ADM5120_SWITCH_BASE 0x12000000 -#define ADM5120_INTC_BASE 0x12200000 -#define ADM5120_UART0_BASE 0x12600000 -#define ADM5120_UART1_BASE 0x12800000 -#define ADM5120_SRAM0_BASE 0x1FC00000 - -#define ADM5120_MPMC_SIZE 0x1000 -#define ADM5120_USBC_SIZE 0x84 -#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE) -#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE) -#define ADM5120_PCICFG_SIZE 0x10 -#define ADM5120_SWITCH_SIZE 0x114 -#define ADM5120_INTC_SIZE 0x28 -#define ADM5120_UART_SIZE 0x20 - -#define ADM5120_CLK_175 175000000 -#define ADM5120_CLK_200 200000000 -#define ADM5120_CLK_225 225000000 -#define ADM5120_CLK_250 250000000 - -#define ADM5120_UART_CLOCK 62500000 - -#endif /* _ADM5120_DEFS_H */ diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h deleted file mode 100644 index df1f24d3a..000000000 --- a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) Gabor Juhos <juhosg@freemail.hu> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _ADM5120_INFO_H -#define _ADM5120_INFO_H - -#include <linux/types.h> - -struct adm5120_info { - unsigned int product_code; - unsigned int revision; - unsigned int cpu_package; - unsigned int nand_boot; - unsigned long cpu_speed; - unsigned int boot_loader; - unsigned int board_type; - unsigned int num_iface; -}; - -#define CPU_SPEED_175 175000000 -#define CPU_SPEED_200 200000000 -#define CPU_SPEED_225 225000000 -#define CPU_SPEED_250 250000000 - -#define CPU_PACKAGE_PQFP 0 -#define CPU_PACKAGE_BGA 1 - -#define BOOT_LOADER_UNKNOWN 0 -#define BOOT_LOADER_CFE 1 -#define BOOT_LOADER_UBOOT 2 -#define BOOT_LOADER_MYLOADER 3 -#define BOOT_LOADER_ROUTERBOOT 4 -#define BOOT_LOADER_LAST 4 - -#define BOARD_TYPE_UNKNOWN 0 -#define BOARD_TYPE_WP54G_WRT 1 -#define BOARD_TYPE_WP54G 2 -#define BOARD_TYPE_WP54AG 3 -#define BOARD_TYPE_WPP54G 4 -#define BOARD_TYPE_WPP54AG 5 -#define BOARD_TYPE_NP28G 6 -#define BOARD_TYPE_NP28GHS 7 -#define BOARD_TYPE_NP27G 8 -#define BOARD_TYPE_WP54Gv1C 9 -#define BOARD_TYPE_RB_111 10 -#define BOARD_TYPE_RB_112 11 -#define BOARD_TYPE_RB_133 12 -#define BOARD_TYPE_RB_133C 13 -#define BOARD_TYPE_RB_150 14 -#define BOARD_TYPE_RB_153 15 -#define BOART_TYPE_LAST 15 - -extern struct adm5120_info adm5120_info; -extern void adm5120_info_init(void); - -static inline int adm5120_has_pci(void) -{ - return (adm5120_info.cpu_package == CPU_PACKAGE_BGA); -} - -#endif /* _ADM5120_INFO_H */ diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h deleted file mode 100644 index 52ea79e7a..000000000 --- a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * ADM5120 ethernet switch definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in Ethernet switch. - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_SWITCH_H -#define _ADM5120_SWITCH_H - -#define BITMASK(len) ((1 << (len))-1) -#define ONEBIT(at) (1 << (at)) - -/* Switch register offsets */ -#define SWITCH_REG_CODE 0x0000 -#define SWITCH_REG_SOFT_RESET 0x0004 -#define SWITCH_REG_MEMCTRL 0x001C -#define SWITCH_REG_CPUP_CONF 0x0024 -#define SWITCH_REG_PORT_CONF0 0x0028 -#define SWITCH_REG_PORT_CONF1 0x002C -#define SWITCH_REG_PORT_CONF2 0x0030 -#define SWITCH_REG_VLAN_G1 0x0040 -#define SWITCH_REG_VLAN_G2 0x0044 -#define SWITCH_REG_SEND_TRIG 0x0048 -#define SWITCH_REG_MAC_WT0 0x0058 -#define SWITCH_REG_MAC_WT1 0x005C -#define SWITCH_REG_PHY_CNTL0 0x0068 -#define SWITCH_REG_PHY_CNTL1 0x006C -#define SWITCH_REG_PHY_CNTL2 0x007C -#define SWITCH_REG_PHY_CNTL3 0x0080 -#define SWITCH_REG_PRI_CNTL 0x0084 -#define SWITCH_REG_INT_STATUS 0x00B0 -#define SWITCH_REG_INT_MASK 0x00B4 -#define SWITCH_REG_GPIO_CONF0 0x00B8 -#define SWITCH_REG_GPIO_CONF2 0x00BC -#define SWITCH_REG_WDOG0 0x00C0 -#define SWITCH_REG_WDOG1 0x00C4 -#define SWITCH_REG_PHY_CNTL4 0x00A0 - -#define SWITCH_REG_SEND_HBADDR 0x00D0 -#define SWITCH_REG_SEND_LBADDR 0x00D4 -#define SWITCH_REG_RECV_HBADDR 0x00D8 -#define SWITCH_REG_RECV_LBADDR 0x00DC - -#define SWITCH_REG_TIMER_INT 0x00F0 -#define SWITCH_REG_TIMER 0x00F4 - -#define SWITCH_REG_PORT0_LED 0x0100 -#define SWITCH_REG_PORT1_LED 0x0104 -#define SWITCH_REG_PORT2_LED 0x0108 -#define SWITCH_REG_PORT3_LED 0x010C -#define SWITCH_REG_PORT4_LED 0x0110 - -/* CODE register bits */ -#define CODE_PC_MASK BITMASK(16) /* Product Code */ -#define CODE_REV_SHIFT 16 -#define CODE_REV_MASK BITMASK(4) /* Product Revision */ -#define CODE_CLKS_SHIFT 20 -#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ -#define CODE_CLKS_175 0 /* 175 MHz */ -#define CODE_CLKS_200 1 /* 200 MHz */ -#define CODE_CLKS_225 2 /* 225 MHz */ -#define CODE_CLKS_250 3 /* 250 MHz */ -#define CODE_NAB ONEBIT(24) /* NAND boot */ -#define CODE_PK_MASK BITMASK(1) /* Package type */ -#define CODE_PK_SHIFT 29 -#define CODE_PK_BGA 0 /* BGA package */ -#define CODE_PK_PQFP 1 /* PQFP package */ - - -#endif /* _ADM5120_SWITCH_H */ diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h deleted file mode 100644 index 3c0c6021b..000000000 --- a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright (C) 2006,2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _MYLOADER_H_ -#define _MYLOADER_H_ - -/* - * Firmware file format: - * - * <header> - * [<block descriptor 0>] - * ... - * [<block descriptor n>] - * <null block descriptor> - * [<block data 0>] - * ... - * [<block data n>] - * - * - */ - -/* Myloader specific magic numbers */ -#define MYLO_MAGIC_FIRMWARE 0x4C594D00 -#define MYLO_MAGIC_20021103 0x20021103 -#define MYLO_MAGIC_20021107 0x20021107 - -#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 -#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 -#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 - -/* - * Addresses of the data structures provided by MyLoader - */ -#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ -#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ -#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ -#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ - -/* Vendor ID's (seems to be same as the PCI vendor ID's) */ -#define VENID_COMPEX 0x11F6 - -/* Devices based on the ADM5120 */ -#define DEVID_COMPEX_NP27G 0x0078 -#define DEVID_COMPEX_NP28G 0x044C -#define DEVID_COMPEX_NP28GHS 0x044E -#define DEVID_COMPEX_WP54Gv1C 0x0514 -#define DEVID_COMPEX_WP54G 0x0515 -#define DEVID_COMPEX_WP54AG 0x0546 -#define DEVID_COMPEX_WPP54AG 0x0550 -#define DEVID_COMPEX_WPP54G 0x0555 - -/* Devices based on the IXP422 */ -#define DEVID_COMPEX_WP18 0x047E -#define DEVID_COMPEX_NP18A 0x0489 - -/* Other devices */ -#define DEVID_COMPEX_NP26G8M 0x03E8 -#define DEVID_COMPEX_NP26G16M 0x03E9 - -struct mylo_fw_header { - uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ - uint32_t crc; /* CRC of the whole firmware */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint16_t vid; /* vendor ID */ - uint16_t did; /* device ID */ - uint16_t svid; /* sub vendor ID */ - uint16_t sdid; /* sub device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; /* FIXME: firmware version high? */ - uint32_t fwlo; /* FIXME: firmware version low? */ - uint32_t flags; /* firmware flags */ -}; - -#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ -#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ - -struct mylo_fw_blockdesc { - uint32_t type; /* block type */ - uint32_t addr; /* relative address to flash start */ - uint32_t dlen; /* size of block data in bytes */ - uint32_t blen; /* total size of block in bytes */ -}; - -#define FW_DESC_TYPE_UNUSED 0 -#define FW_DESC_TYPE_USED 1 - -struct mylo_partition { - uint16_t flags; /* partition flags */ - uint16_t type; /* type of the partition */ - uint32_t addr; /* relative address of the partition from the - flash start */ - uint32_t size; /* size of the partition in bytes */ - uint32_t param; /* if this is the active partition, the - MyLoader load code to this address */ -}; - -#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, - * MyLoader loads firmware from here */ -#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ -#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ -#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM - * before decompression */ -#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ - -#define PARTITION_TYPE_FREE 0 -#define PARTITION_TYPE_USED 1 - -#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the - partition table */ - -struct mylo_partition_table { - uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint32_t res2; /* unknown/unused */ - struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; -}; - -struct mylo_partition_header { - uint32_t len; /* length of the partition data */ - uint32_t crc; /* CRC value of the partition data */ -}; - -struct mylo_system_params { - uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t mylo_ver; - uint16_t vid; /* Vendor ID */ - uint16_t did; /* Device ID */ - uint16_t svid; /* Sub Vendor ID */ - uint16_t sdid; /* Sub Device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; - uint32_t fwlo; - uint32_t tftp_addr; - uint32_t prog_start; - uint32_t flash_size; /* Size of boot FLASH in bytes */ - uint32_t dram_size; /* Size of onboard RAM in bytes */ -}; - - -struct mylo_eth_addr { - uint8_t mac[6]; - uint8_t csum[2]; -}; - -#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address - in the board parameters */ - -struct mylo_board_params { - uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t res2; - struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; -}; - -#endif /* _MYLOADER_H_*/ |