diff options
Diffstat (limited to 'target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h')
| -rw-r--r-- | target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h deleted file mode 100644 index 3c0c6021b..000000000 --- a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright (C) 2006,2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _MYLOADER_H_ -#define _MYLOADER_H_ - -/* - * Firmware file format: - * - * <header> - * [<block descriptor 0>] - * ... - * [<block descriptor n>] - * <null block descriptor> - * [<block data 0>] - * ... - * [<block data n>] - * - * - */ - -/* Myloader specific magic numbers */ -#define MYLO_MAGIC_FIRMWARE 0x4C594D00 -#define MYLO_MAGIC_20021103 0x20021103 -#define MYLO_MAGIC_20021107 0x20021107 - -#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 -#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 -#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 - -/* - * Addresses of the data structures provided by MyLoader - */ -#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ -#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ -#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ -#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ - -/* Vendor ID's (seems to be same as the PCI vendor ID's) */ -#define VENID_COMPEX 0x11F6 - -/* Devices based on the ADM5120 */ -#define DEVID_COMPEX_NP27G 0x0078 -#define DEVID_COMPEX_NP28G 0x044C -#define DEVID_COMPEX_NP28GHS 0x044E -#define DEVID_COMPEX_WP54Gv1C 0x0514 -#define DEVID_COMPEX_WP54G 0x0515 -#define DEVID_COMPEX_WP54AG 0x0546 -#define DEVID_COMPEX_WPP54AG 0x0550 -#define DEVID_COMPEX_WPP54G 0x0555 - -/* Devices based on the IXP422 */ -#define DEVID_COMPEX_WP18 0x047E -#define DEVID_COMPEX_NP18A 0x0489 - -/* Other devices */ -#define DEVID_COMPEX_NP26G8M 0x03E8 -#define DEVID_COMPEX_NP26G16M 0x03E9 - -struct mylo_fw_header { - uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ - uint32_t crc; /* CRC of the whole firmware */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint16_t vid; /* vendor ID */ - uint16_t did; /* device ID */ - uint16_t svid; /* sub vendor ID */ - uint16_t sdid; /* sub device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; /* FIXME: firmware version high? */ - uint32_t fwlo; /* FIXME: firmware version low? */ - uint32_t flags; /* firmware flags */ -}; - -#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ -#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ - -struct mylo_fw_blockdesc { - uint32_t type; /* block type */ - uint32_t addr; /* relative address to flash start */ - uint32_t dlen; /* size of block data in bytes */ - uint32_t blen; /* total size of block in bytes */ -}; - -#define FW_DESC_TYPE_UNUSED 0 -#define FW_DESC_TYPE_USED 1 - -struct mylo_partition { - uint16_t flags; /* partition flags */ - uint16_t type; /* type of the partition */ - uint32_t addr; /* relative address of the partition from the - flash start */ - uint32_t size; /* size of the partition in bytes */ - uint32_t param; /* if this is the active partition, the - MyLoader load code to this address */ -}; - -#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, - * MyLoader loads firmware from here */ -#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ -#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ -#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM - * before decompression */ -#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ - -#define PARTITION_TYPE_FREE 0 -#define PARTITION_TYPE_USED 1 - -#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the - partition table */ - -struct mylo_partition_table { - uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint32_t res2; /* unknown/unused */ - struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; -}; - -struct mylo_partition_header { - uint32_t len; /* length of the partition data */ - uint32_t crc; /* CRC value of the partition data */ -}; - -struct mylo_system_params { - uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t mylo_ver; - uint16_t vid; /* Vendor ID */ - uint16_t did; /* Device ID */ - uint16_t svid; /* Sub Vendor ID */ - uint16_t sdid; /* Sub Device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; - uint32_t fwlo; - uint32_t tftp_addr; - uint32_t prog_start; - uint32_t flash_size; /* Size of boot FLASH in bytes */ - uint32_t dram_size; /* Size of onboard RAM in bytes */ -}; - - -struct mylo_eth_addr { - uint8_t mac[6]; - uint8_t csum[2]; -}; - -#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address - in the board parameters */ - -struct mylo_board_params { - uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t res2; - struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; -}; - -#endif /* _MYLOADER_H_*/ |