diff options
Diffstat (limited to 'target/linux/ramips/files/arch')
4 files changed, 161 insertions, 1 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 712976082..9e48b5caa 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -15,6 +15,7 @@ enum ramips_mach_type { RAMIPS_MACH_GENERIC, /* RT2880 based machines */ RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ + RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ /* RT3050 based machines */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index 0fc778830..c30b3ad1d 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -7,6 +7,11 @@ config RT288X_MACH_RT_N15 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT288X_MACH_WLI_TX4_AG300N + bool "Buffalo WLI-TX4-AG300N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT288X_MACH_WZR_AGL300NH bool "Buffalo WZR-AGL300NH board support" select RALINK_DEV_GPIO_LEDS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index 103081aaa..ab707018d 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -14,5 +14,5 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o - +obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c new file mode 100644 index 000000000..0f200ea29 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c @@ -0,0 +1,154 @@ +/* + * Buffalo WLI-TX4-AG300N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/ethtool.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define WLI_TX4_AG300N_GPIO_LED_DIAG 10 +#define WLI_TX4_AG300N_GPIO_LED_POWER 12 +#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13 + +#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0 +#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8 +#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9 + +#define WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wli_tx4_ag300n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = 0x050000, + .size = 0x0d0000, + }, + { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2d0000, + }, + { + .name = "user", + .offset = 0x3f0000, + .size = 0x010000, + }, + { + .name = "firmware", + .offset = 0x050000, + .size = 0x3a0000, + }, +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wli_tx4_ag300n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wli_tx4_ag300n_partitions), + .parts = wli_tx4_ag300n_partitions, +#endif +}; + +static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = { + { + .name = "buffalo:blue:power", + .gpio = WLI_TX4_AG300N_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "buffalo:red:diag", + .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG, + .active_low = 1, + }, + { + .name = "buffalo:blue:security", + .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY, + .active_low = 0, + }, +}; + +static struct gpio_button wli_tx4_ag300n_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "AOSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, + { + .desc = "Bandwidth switch", + .type = EV_KEY, + .code = BTN_0, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH, + .active_low = 0, + }, +}; + +static void __init wli_tx4_ag300n_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio), + wli_tx4_ag300n_leds_gpio); + ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons), + wli_tx4_ag300n_gpio_buttons); + + rt288x_register_flash(0, &wli_tx4_ag300n_flash_data); + rt288x_register_wifi(); + rt288x_register_wdt(); + + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N", + "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init); |