diff options
Diffstat (limited to 'target/linux/ramips/files/arch/mips/ralink')
3 files changed, 112 insertions, 0 deletions
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index 4189d9eef..a2593e885 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -11,6 +11,11 @@ config RT288X_MACH_RT_N15 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT288X_MACH_V11ST_FE + bool "Ralink V11ST-FE board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT288X_MACH_WLI_TX4_AG300N bool "Buffalo WLI-TX4-AG300N board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index 5205706f3..473f85599 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o +obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c new file mode 100644 index 000000000..631468086 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c @@ -0,0 +1,106 @@ +/* + * Ralink V11ST-FE board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define V11ST_FE_GPIO_STATUS_LED 12 +#define V11ST_FE_GPIO_BUTTON_WPS 0 + +#define V11ST_FE_KEYS_POLL_INTERVAL 20 +#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL) + +static struct gpio_led v11st_fe_leds_gpio[] __initdata = { + { + .name = "v11st-fe:green:status", + .gpio = V11ST_FE_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL, + .gpio = V11ST_FE_GPIO_BUTTON_WPS, + } +}; + +static struct mtd_partition v11st_fe_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x190000, + .size = 0x210000, + } +}; + +static void __init rt_v11st_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_flash0_data.nr_parts = ARRAY_SIZE(v11st_fe_partitions); + rt288x_flash0_data.parts = v11st_fe_partitions; + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio), + v11st_fe_leds_gpio); + + ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v11st_fe_gpio_buttons), + v11st_fe_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init); |