summaryrefslogtreecommitdiffstats
path: root/target/linux/pxa-2.6/patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/pxa-2.6/patches')
-rw-r--r--target/linux/pxa-2.6/patches/000-cpufreq.patch533
-rw-r--r--target/linux/pxa-2.6/patches/001-pm.patch869
-rw-r--r--target/linux/pxa-2.6/patches/002-usb_gadget.patch58
-rw-r--r--target/linux/pxa-2.6/patches/004-skbuf_hack.patch10
-rw-r--r--target/linux/pxa-2.6/patches/005-mtd.patch111
5 files changed, 0 insertions, 1581 deletions
diff --git a/target/linux/pxa-2.6/patches/000-cpufreq.patch b/target/linux/pxa-2.6/patches/000-cpufreq.patch
deleted file mode 100644
index 3cb6676b4..000000000
--- a/target/linux/pxa-2.6/patches/000-cpufreq.patch
+++ /dev/null
@@ -1,533 +0,0 @@
-diff -Nurbw linux-2.6.17/arch/arm/Kconfig linux-2.6.17-patched/arch/arm/Kconfig
---- linux-2.6.17/arch/arm/Kconfig 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/arch/arm/Kconfig 2006-09-21 14:57:02.000000000 -0700
-@@ -656,7 +656,7 @@
-
- endmenu
-
--if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
-+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1 || ARCH_PXA)
-
- menu "CPU Frequency scaling"
-
-@@ -685,6 +685,13 @@
-
- endmenu
-
-+config CPU_FREQ_PXA
-+ bool
-+ depends on CPU_FREQ && ARCH_PXA
-+ default y
-+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
-+ select CPU_FREQ_TABLE
-+
- endif
-
- menu "Floating point emulation"
-diff -Nurbw linux-2.6.17/arch/arm/mach-pxa/cpu-pxa.c linux-2.6.17-patched/arch/arm/mach-pxa/cpu-pxa.c
---- linux-2.6.17/arch/arm/mach-pxa/cpu-pxa.c 1969-12-31 16:00:00.000000000 -0800
-+++ linux-2.6.17-patched/arch/arm/mach-pxa/cpu-pxa.c 2006-09-21 14:57:02.000000000 -0700
-@@ -0,0 +1,324 @@
-+/*
-+ * linux/arch/arm/mach-pxa/cpu-pxa.c
-+ *
-+ * Copyright (C) 2002,2003 Intrinsyc Software
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * History:
-+ * 31-Jul-2002 : Initial version [FB]
-+ * 29-Jan-2003 : added PXA255 support [FB]
-+ * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
-+ *
-+ * Note:
-+ * This driver may change the memory bus clock rate, but will not do any
-+ * platform specific access timing changes... for example if you have flash
-+ * memory connected to CS0, you will need to register a platform specific
-+ * notifier which will adjust the memory access strobes to maintain a
-+ * minimum strobe width.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#undef DEBUG
-+
-+#ifdef DEBUG
-+ static unsigned int freq_debug = DEBUG;
-+ module_param(freq_debug, int, 0);
-+ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-+#else
-+ #define freq_debug 0
-+#endif
-+
-+typedef struct
-+{
-+ unsigned int khz;
-+ unsigned int membus;
-+ unsigned int cccr;
-+ unsigned int div2;
-+} pxa_freqs_t;
-+
-+/* Define the refresh period in mSec for the SDRAM and the number of rows */
-+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-+#define SDRAM_ROWS 2048 /* 64MB=8192 32MB=4096 */
-+#define MDREFR_DRI(x) ((x*SDRAM_TREF)/(SDRAM_ROWS*32))
-+
-+#define CCLKCFG_TURBO 0x1
-+#define CCLKCFG_FCS 0x2
-+#define PXA25x_MIN_FREQ 99533
-+#define PXA25x_MAX_FREQ 530842
-+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-+#define MDREFR_DRI_MASK 0xFFF
-+
-+
-+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-+static pxa_freqs_t pxa255_run_freqs[] =
-+{
-+ /* CPU MEMBUS CCCR DIV2*/
-+ { 99533, 99533, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
-+ {132710, 132710, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
-+ {199066, 99533, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
-+ {265421, 132710, 0x143, 0}, /* run=265, turbo=265, PXbus=133, SDRAM=133 */
-+ {331776, 165888, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
-+ {398131, 99533, 0x161, 0}, /* run=398, turbo=398, PXbus=99, SDRAM=99 */
-+ {398131, 132710, 0x1c3, 0}, /* run=265, turbo=398, PXbus=133, SDRAM=133 */
-+ {530842, 132710, 0x163, 0}, /* run=531, turbo=531, PXbus=133, SDRAM=133 */
-+ {0,}
-+};
-+#define NUM_RUN_FREQS (sizeof(pxa255_run_freqs)/sizeof(pxa_freqs_t))
-+
-+static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
-+
-+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-+static pxa_freqs_t pxa255_turbo_freqs[] =
-+{
-+ /* CPU MEMBUS CCCR DIV2*/
-+ { 99533, 99533, 0x121, 1}, /* run=99, turbo= 99, PXbus=99, SDRAM=50 */
-+ {149299, 99533, 0x1a1, 0}, /* run=99, turbo=149, PXbus=99, SDRAM=99 */
-+ {199066, 99533, 0x221, 0}, /* run=99, turbo=199, PXbus=99, SDRAM=99 */
-+ {298598, 99533, 0x321, 0}, /* run=99, turbo=299, PXbus=99, SDRAM=99 */
-+ {398131, 99533, 0x241, 1}, /* run=199, turbo=398, PXbus=99, SDRAM=50 */
-+ {0,}
-+};
-+#define NUM_TURBO_FREQS (sizeof(pxa255_turbo_freqs)/sizeof(pxa_freqs_t))
-+
-+static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
-+
-+extern unsigned get_clk_frequency_khz(int info);
-+
-+/* find a valid frequency point */
-+static int pxa_verify_policy(struct cpufreq_policy *policy)
-+{
-+ int ret;
-+ struct cpufreq_frequency_table *pxa_freqs_table;
-+
-+ if(policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
-+ pxa_freqs_table = pxa255_run_freq_table;
-+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
-+ pxa_freqs_table = pxa255_turbo_freq_table;
-+ } else {
-+ printk("CPU PXA: Unknown policy found. "
-+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
-+ pxa_freqs_table = pxa255_run_freq_table;
-+ }
-+ ret=cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-+
-+ if(freq_debug) {
-+ printk("Verified CPU policy: %dKhz min to %dKhz max\n",
-+ policy->min, policy->max);
-+ }
-+
-+ return ret;
-+}
-+
-+static int pxa_set_target(struct cpufreq_policy *policy,
-+ unsigned int target_freq,
-+ unsigned int relation)
-+{
-+ int idx;
-+ cpumask_t cpus_allowed;
-+ int cpu = policy->cpu;
-+ struct cpufreq_freqs freqs;
-+ pxa_freqs_t *pxa_freq_settings;
-+ struct cpufreq_frequency_table *pxa_freqs_table;
-+ unsigned long flags;
-+ unsigned int unused;
-+ unsigned int preset_mdrefr, postset_mdrefr;
-+ void *ramstart;
-+
-+ /*
-+ * Save this threads cpus_allowed mask.
-+ */
-+ cpus_allowed = current->cpus_allowed;
-+
-+ /*
-+ * Bind to the specified CPU. When this call returns,
-+ * we should be running on the right CPU.
-+ */
-+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
-+ BUG_ON(cpu != smp_processor_id());
-+
-+ /* Get the current policy */
-+ if(policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
-+ pxa_freq_settings = pxa255_run_freqs;
-+ pxa_freqs_table = pxa255_run_freq_table;
-+ }else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
-+ pxa_freq_settings = pxa255_turbo_freqs;
-+ pxa_freqs_table = pxa255_turbo_freq_table;
-+ }else {
-+ printk("CPU PXA: Unknown policy found. "
-+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
-+ pxa_freq_settings = pxa255_run_freqs;
-+ pxa_freqs_table = pxa255_run_freq_table;
-+ }
-+
-+ /* Lookup the next frequency */
-+ if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-+ target_freq, relation, &idx)) {
-+ return -EINVAL;
-+ }
-+
-+ freqs.old = policy->cur;
-+ freqs.new = pxa_freq_settings[idx].khz;
-+ freqs.cpu = policy->cpu;
-+ if(freq_debug) {
-+ printk(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-+ freqs.new/1000, (pxa_freq_settings[idx].div2) ?
-+ (pxa_freq_settings[idx].membus/2000) :
-+ (pxa_freq_settings[idx].membus/1000));
-+ }
-+
-+ ramstart = phys_to_virt(0xa0000000);
-+
-+ /*
-+ * Tell everyone what we're about to do...
-+ * you should add a notify client with any platform specific
-+ * Vcc changing capability
-+ */
-+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+
-+ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
-+ * we need to preset the smaller DRI before the change. If we're speeding
-+ * up we need to set the larger DRI value after the change.
-+ */
-+ preset_mdrefr = postset_mdrefr = MDREFR;
-+ if((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
-+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
-+ MDREFR_DRI(pxa_freq_settings[idx].membus);
-+ }
-+ postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
-+ MDREFR_DRI(pxa_freq_settings[idx].membus);
-+
-+ /* If we're dividing the memory clock by two for the SDRAM clock, this
-+ * must be set prior to the change. Clearing the divide must be done
-+ * after the change.
-+ */
-+ if(pxa_freq_settings[idx].div2) {
-+ preset_mdrefr |= MDREFR_DB2_MASK;
-+ postset_mdrefr |= MDREFR_DB2_MASK;
-+ } else {
-+ postset_mdrefr &= ~MDREFR_DB2_MASK;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Set new the CCCR */
-+ CCCR = pxa_freq_settings[idx].cccr;
-+
-+ __asm__ __volatile__(" \
-+ ldr r4, [%1] ; /* load MDREFR */ \
-+ b 2f ; \
-+ .align 5 ; \
-+1: \
-+ str %4, [%1] ; /* preset the MDREFR */ \
-+ mcr p14, 0, %2, c6, c0, 0 ; /* set CCLKCFG[FCS] */ \
-+ str %5, [%1] ; /* postset the MDREFR */ \
-+ \
-+ b 3f ; \
-+2: b 1b ; \
-+3: nop ; \
-+ "
-+ : "=&r" (unused)
-+ : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart), \
-+ "r" (preset_mdrefr), "r" (postset_mdrefr)
-+ : "r4", "r5");
-+ local_irq_restore(flags);
-+
-+ /*
-+ * Restore the CPUs allowed mask.
-+ */
-+ set_cpus_allowed(current, cpus_allowed);
-+
-+ /*
-+ * Tell everyone what we've just done...
-+ * you should add a notify client with any platform specific
-+ * SDRAM refresh timer adjustments
-+ */
-+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+
-+ return 0;
-+}
-+
-+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-+{
-+ cpumask_t cpus_allowed;
-+ unsigned int cpu = policy->cpu;
-+ int i;
-+
-+ cpus_allowed = current->cpus_allowed;
-+
-+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
-+ BUG_ON(cpu != smp_processor_id());
-+
-+ /* set default policy and cpuinfo */
-+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
-+ policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
-+ policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
-+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-+ policy->cur = get_clk_frequency_khz(0); /* current freq */
-+ policy->min = policy->max = policy->cur;
-+
-+ /* Generate the run cpufreq_frequency_table struct */
-+ for(i=0;i<NUM_RUN_FREQS;i++) {
-+ pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-+ pxa255_run_freq_table[i].index = i;
-+ }
-+ pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-+ /* Generate the turbo cpufreq_frequency_table struct */
-+ for(i=0;i<NUM_TURBO_FREQS;i++) {
-+ pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
-+ pxa255_turbo_freq_table[i].index = i;
-+ }
-+ pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-+
-+ set_cpus_allowed(current, cpus_allowed);
-+ printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-+
-+ return 0;
-+}
-+
-+static struct cpufreq_driver pxa_cpufreq_driver = {
-+ .verify = pxa_verify_policy,
-+ .target = pxa_set_target,
-+ .init = pxa_cpufreq_init,
-+ .name = "PXA25x",
-+};
-+
-+static int __init pxa_cpu_init(void)
-+{
-+ return cpufreq_register_driver(&pxa_cpufreq_driver);
-+}
-+
-+static void __exit pxa_cpu_exit(void)
-+{
-+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
-+}
-+
-+
-+MODULE_AUTHOR ("Intrinsyc Software Inc.");
-+MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
-+MODULE_LICENSE("GPL");
-+module_init(pxa_cpu_init);
-+module_exit(pxa_cpu_exit);
-+
-diff -Nurbw linux-2.6.17/arch/arm/mach-pxa/Makefile linux-2.6.17-patched/arch/arm/mach-pxa/Makefile
---- linux-2.6.17/arch/arm/mach-pxa/Makefile 2006-09-21 15:11:33.000000000 -0700
-+++ linux-2.6.17-patched/arch/arm/mach-pxa/Makefile 2006-09-21 14:57:02.000000000 -0700
-@@ -30,5 +30,6 @@
- obj-$(CONFIG_PM) += pm.o sleep.o
- obj-$(CONFIG_PXA_SSP) += ssp.o
-+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
-
- ifeq ($(CONFIG_PXA27x),y)
- obj-$(CONFIG_PM) += standby.o
-diff -Nurbw linux-2.6.17/Documentation/cpu-freq/user-guide.txt linux-2.6.17-patched/Documentation/cpu-freq/user-guide.txt
---- linux-2.6.17/Documentation/cpu-freq/user-guide.txt 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/Documentation/cpu-freq/user-guide.txt 2006-09-21 14:57:02.000000000 -0700
-@@ -18,7 +18,7 @@
- Contents:
- ---------
- 1. Supported Architectures and Processors
--1.1 ARM
-+1.1 ARM, PXA
- 1.2 x86
- 1.3 sparc64
- 1.4 ppc
-@@ -37,14 +37,15 @@
- 1. Supported Architectures and Processors
- =========================================
-
--1.1 ARM
---------
-+1.1 ARM, PXA
-+------------
-
- The following ARM processors are supported by cpufreq:
-
- ARM Integrator
- ARM-SA1100
- ARM-SA1110
-+Intel PXA
-
-
- 1.2 x86
-diff -Nurbw linux-2.6.17/drivers/cpufreq/Kconfig linux-2.6.17-patched/drivers/cpufreq/Kconfig
---- linux-2.6.17/drivers/cpufreq/Kconfig 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/drivers/cpufreq/Kconfig 2006-09-21 15:06:12.000000000 -0700
-@@ -46,13 +46,9 @@
- This will show detail CPU frequency translation table in sysfs file
- system
-
--# Note that it is not currently possible to set the other governors (such as ondemand)
--# as the default, since if they fail to initialise, cpufreq will be
--# left in an undefined state.
--
- choice
- prompt "Default CPUFreq governor"
-- default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
-+ default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 || CPU_FREQ_PXA
- default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
- help
- This option sets which CPUFreq governor shall be loaded at
-@@ -66,6 +62,14 @@
- the frequency statically to the highest frequency supported by
- the CPU.
-
-+config CPU_FREQ_DEFAULT_GOV_POWERSAVE
-+ bool "powersave"
-+ select CPU_FREQ_GOV_POWERSAVE
-+ help
-+ Use the CPUFreq governor 'powersave' as default. This sets
-+ the frequency statically to the lowest frequency supported by
-+ the CPU.
-+
- config CPU_FREQ_DEFAULT_GOV_USERSPACE
- bool "userspace"
- select CPU_FREQ_GOV_USERSPACE
-@@ -75,6 +79,23 @@
- program shall be able to set the CPU dynamically without having
- to enable the userspace governor manually.
-
-+config CPU_FREQ_DEFAULT_GOV_ONDEMAND
-+ bool "ondemand"
-+ select CPU_FREQ_GOV_ONDEMAND
-+ help
-+ Use the CPUFreq governor 'ondemand' as default. This sets
-+ the frequency dynamically based on CPU load, throttling up
-+ and down as necessary.
-+
-+config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
-+ bool "conservative"
-+ select CPU_FREQ_GOV_CONSERVATIVE
-+ help
-+ Use the CPUFreq governor 'conservative' as default. This sets
-+ the frequency dynamically based on CPU load, throttling up
-+ and down as necessary. The frequency is gracefully increased
-+ and decreased rather than jumping to 100% when speed is required.
-+
- endchoice
-
- config CPU_FREQ_GOV_PERFORMANCE
-diff -Nurbw linux-2.6.17/include/linux/cpufreq.h linux-2.6.17-patched/include/linux/cpufreq.h
---- linux-2.6.17/include/linux/cpufreq.h 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/include/linux/cpufreq.h 2006-09-21 15:08:35.000000000 -0700
-@@ -276,9 +276,18 @@
- #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
- extern struct cpufreq_governor cpufreq_gov_performance;
- #define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_performance
-+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE)
-+extern struct cpufreq_governor cpufreq_gov_powersave;
-+#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_powersave
- #elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
- extern struct cpufreq_governor cpufreq_gov_userspace;
- #define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_userspace
-+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
-+extern struct cpufreq_governor cpufreq_gov_ondemand;
-+#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_ondemand;
-+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
-+extern struct cpufreq_governor cpufreq_gov_conservative;
-+#define CPUFREQ_DEFAULT_GOVERNOR &cpufreq_gov_conservative;
- #endif
-
-
-diff -Nubrw --exclude='.*.o.cmd' linux-2.6.17/drivers/cpufreq/cpufreq_conservative.c linux-2.6.17-patched/drivers/cpufreq/cpufreq_conservative.c
---- linux-2.6.17/drivers/cpufreq/cpufreq_conservative.c 2006-09-21 15:26:46.000000000 -0700
-+++ linux-2.6.17-patched/drivers/cpufreq/cpufreq_conservative.c 2006-06-17 18:49:35.000000000 -0700
-@@ -529,7 +529,7 @@
- return 0;
- }
-
--static struct cpufreq_governor cpufreq_gov_dbs = {
-+struct cpufreq_governor cpufreq_gov_conservative = {
- .name = "conservative",
- .governor = cpufreq_governor_dbs,
- .owner = THIS_MODULE,
-@@ -537,7 +537,7 @@
-
- static int __init cpufreq_gov_dbs_init(void)
- {
-- return cpufreq_register_governor(&cpufreq_gov_dbs);
-+ return cpufreq_register_governor(&cpufreq_gov_conservative);
- }
-
- static void __exit cpufreq_gov_dbs_exit(void)
-@@ -545,7 +545,7 @@
- /* Make sure that the scheduled work is indeed not running */
- flush_scheduled_work();
-
-- cpufreq_unregister_governor(&cpufreq_gov_dbs);
-+ cpufreq_unregister_governor(&cpufreq_gov_conservative);
- }
-
-
-diff -Nubrw --exclude='.*.o.cmd' linux-2.6.17/drivers/cpufreq/cpufreq_ondemand.c linux-2.6.17-patched/drivers/cpufreq/cpufreq_ondemand.c
---- linux-2.6.17/drivers/cpufreq/cpufreq_ondemand.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/drivers/cpufreq/cpufreq_ondemand.c 2006-09-27 14:00:15.000000000 -0700
-@@ -484,7 +484,7 @@
- return 0;
- }
-
--static struct cpufreq_governor cpufreq_gov_dbs = {
-+struct cpufreq_governor cpufreq_gov_ondemand = {
- .name = "ondemand",
- .governor = cpufreq_governor_dbs,
- .owner = THIS_MODULE,
-@@ -492,7 +492,7 @@
-
- static int __init cpufreq_gov_dbs_init(void)
- {
-- return cpufreq_register_governor(&cpufreq_gov_dbs);
-+ return cpufreq_register_governor(&cpufreq_gov_ondemand);
- }
-
- static void __exit cpufreq_gov_dbs_exit(void)
-@@ -504,7 +504,7 @@
- destroy_workqueue(dbs_workq);
- }
-
-- cpufreq_unregister_governor(&cpufreq_gov_dbs);
-+ cpufreq_unregister_governor(&cpufreq_gov_ondemand);
- }
-
-
diff --git a/target/linux/pxa-2.6/patches/001-pm.patch b/target/linux/pxa-2.6/patches/001-pm.patch
deleted file mode 100644
index 799b9bd53..000000000
--- a/target/linux/pxa-2.6/patches/001-pm.patch
+++ /dev/null
@@ -1,869 +0,0 @@
-diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/pm.c linux-2.6.17-patched/arch/arm/mach-pxa/pm.c
---- linux-2.6.17/arch/arm/mach-pxa/pm.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/arch/arm/mach-pxa/pm.c 2006-09-11 10:58:41.000000000 -0700
-@@ -10,35 +10,50 @@
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-+
- #include <linux/config.h>
- #include <linux/init.h>
--#include <linux/module.h>
--#include <linux/suspend.h>
-+#include <linux/pm.h>
-+#include <linux/slab.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/sysctl.h>
- #include <linux/errno.h>
--#include <linux/time.h>
-
- #include <asm/hardware.h>
- #include <asm/memory.h>
- #include <asm/system.h>
--#include <asm/arch/pm.h>
-+#include <asm/leds.h>
-+#include <asm/uaccess.h>
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/lubbock.h>
- #include <asm/mach/time.h>
-
-+/**/
-+#include <linux/module.h>
-+/**/
-+//kirti
-+#include <linux/delay.h>
-+//kirti~
-
- /*
- * Debug macros
- */
--#undef DEBUG
-+#define DEBUG
-+
-+extern void pxa_cpu_suspend(void);
-+extern void pxa_cpu_resume(void);
-+
-+int pm_pwronoff;
-+/*Angelia Additions */
-+int pm_pedr=0;
-+EXPORT_SYMBOL(pm_pwronoff);
-+EXPORT_SYMBOL(pm_pedr);
-+
-
- #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
- #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-
--#define RESTORE_GPLEVEL(n) do { \
-- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
-- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
--} while (0)
--
- /*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
-@@ -46,97 +61,405 @@
- */
- enum { SLEEP_SAVE_START = 0,
-
-- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
-- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
-- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
-- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
-- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
--
-- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-+ SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER,
-+ SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3,
-
-- SLEEP_SAVE_PSTR,
-+ SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
-+ SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
-+ SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
-+ SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR2_L,
-+ SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_U, SLEEP_SAVE_GAFR2_U,
-+
-+ SLEEP_SAVE_FFIER, SLEEP_SAVE_FFLCR, SLEEP_SAVE_FFMCR,
-+ SLEEP_SAVE_FFSPR, SLEEP_SAVE_FFISR,
-+ SLEEP_SAVE_FFDLL, SLEEP_SAVE_FFDLH,SLEEP_SAVE_FFFCR,
-+
-+ SLEEP_SAVE_STIER, SLEEP_SAVE_STLCR, SLEEP_SAVE_STMCR,
-+ SLEEP_SAVE_STSPR, SLEEP_SAVE_STISR,
-+ SLEEP_SAVE_STDLL, SLEEP_SAVE_STDLH,
-+
-+ SLEEP_SAVE_BTIER, SLEEP_SAVE_BTLCR, SLEEP_SAVE_BTMCR,
-+ SLEEP_SAVE_BTSPR, SLEEP_SAVE_BTISR,
-+ SLEEP_SAVE_BTDLL, SLEEP_SAVE_BTDLH,
-
- SLEEP_SAVE_ICMR,
- SLEEP_SAVE_CKEN,
-
--#ifdef CONFIG_PXA27x
-- SLEEP_SAVE_MDREFR,
-- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
-- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
--#endif
-+ SLEEP_SAVE_LCCR0, SLEEP_SAVE_LCCR1, SLEEP_SAVE_LCCR2,SLEEP_SAVE_LCCR3,
-+ SLEEP_SAVE_TMEDCR, SLEEP_SAVE_FDADR0, SLEEP_SAVE_FSADR0,SLEEP_SAVE_FIDR0,SLEEP_SAVE_FDADR1,
-+ SLEEP_SAVE_LDCMD0,
-+
-+ SLEEP_SAVE_NSSCR0,SLEEP_SAVE_NSSCR1,SLEEP_SAVE_NSSSR,SLEEP_SAVE_NSSITR,SLEEP_SAVE_NSSDR,
-+ SLEEP_SAVE_NSSTO,SLEEP_SAVE_NSSPSP,
-
-- SLEEP_SAVE_CKSUM,
-
-+ SLEEP_SAVE_CKSUM,
- SLEEP_SAVE_SIZE
- };
-
-+/**/
-+#define UART_DTR 1
-+#define UART_RTS 2
-+
-+/**/
-
--int pxa_pm_enter(suspend_state_t state)
-+int pm_do_suspend(void)
- {
- unsigned long sleep_save[SLEEP_SAVE_SIZE];
- unsigned long checksum = 0;
-- struct timespec delta, rtc;
- int i;
-+ int valbefore,valafter,valafter1;
-+ int gpsr0,gpsr1,gpsr2;
- extern void pxa_cpu_pm_enter(suspend_state_t state);
-
--#ifdef CONFIG_IWMMXT
-- /* force any iWMMXt context to ram **/
-- iwmmxt_task_disable(NULL);
--#endif
-+ // YoKu 16Feb06 GPIO Changed ----->
-+
-+ PGSR2 |= GPIO_bit(78);
-+/* if(GPLR2 & GPIO_bit(78)) // LCD Reset Pin
-+ PGSR2 |= GPIO_bit(78);
-+ else
-+ PGSR2 &= ~GPIO_bit(78); */
-+ GPDR0 &= ~GPIO_bit(0);
-+ GPDR0 &= ~GPIO_bit(1);
-+ GPDR0 &= ~GPIO_bit(3); //Tushar: 20 apr GPIO3 configured as input
-+ GPDR0 &= ~GPIO_bit(2);
-+// GPDR0 &= ~GPIO_bit(5);
-+// GPDR0 &= ~GPIO_bit(6);
-+// GPDR0 &= ~GPIO_bit(7);
-+// GPDR0 &= ~GPIO_bit(8);
-+
-+
-+// KeyCol pin Status in sleep mode
-+ PGSR0 &= ~GPIO_bit(9); //19
-+ PGSR0 &= ~GPIO_bit(10); //20
-+ PGSR0 &= ~GPIO_bit(11); //21
-+ PGSR0 &= ~GPIO_bit(12); //22
-+ PGSR0 &= ~GPIO_bit(13); //23
-+ PGSR0 &= ~GPIO_bit(14); //24
-+
-+ printk("KER_PM: Setting up wakeup sources 26May06\n");
-+
-+ // KeyPad
-+ //printk("KER_PM: Uncommented key pad wakeup sources\n");
-+ PWER |= GPIO_bit(5); //11
-+ PWER |= GPIO_bit(6); //12
-+ PWER |= GPIO_bit(7); //13
-+ PWER |= GPIO_bit(8); //14
-+ PFER |= GPIO_bit(5); //11
-+ PFER |= GPIO_bit(6); //12
-+ PFER |= GPIO_bit(7); //13
-+ PFER |= GPIO_bit(8); //14
-+ PRER |= GPIO_bit(5); //11
-+ PRER |= GPIO_bit(6); //12
-+ PRER |= GPIO_bit(7); //13
-+ PRER |= GPIO_bit(8); //14
-+
-+ // USB
-+ PWER |= GPIO_bit(3); //6
-+ PFER |= GPIO_bit(3); //6
-+ PRER |= GPIO_bit(3); //6
-+
-+ // PMU
-+ PWER |= GPIO_bit(2); //4
-+ PFER |= GPIO_bit(2); //4
-+ PRER |= GPIO_bit(2); //4
-+
-+ // Anup : GSM RI
-+ PWER |= GPIO_bit(0); //0
-+ PFER |= GPIO_bit(0); //0
-+ PRER |= GPIO_bit(0); //0
-+ // anup prashant : for gsm reset problem 19 may 2006
-+ //GPDR0 |= GPIO_bit(18); YoKu Commented this line, GPIO18 should be i/p pin to avoid GSM Reset pulse
-+ PGSR0 |= GPIO_bit(18); // GSM reset pin
-+ PGSR0 |= GPIO_bit(0); //
-+ PGSR1 |= GPIO_bit(38); // commneted .18 apr
-+ // <----- YoKu
-+
-+ // YoKu ----->
-+ // When exiting from sleep mode, 10us Low pulse comes on GSM Reset and Pwr pin
-+ // to avoid this configure GPIO 18,80 as input pins before going to sleep mode
-+ GPDR0 &= ~GPIO_bit(18);
-+ //GPDR2 &= ~GPIO_bit(80);
-+ // <----- YoKu
-+
-+ //kirti for RTC
-+ PWER |= PWER_RTC;
-+ //kirti cli();
-+ local_irq_disable();
-+ //kirti clf();
-+ local_fiq_disable();
-+ leds_event(led_stop);
-+
-+ /* Put Current time into RCNR */
-+ RCNR = xtime.tv_sec;
-
-- /* preserve current time */
-- rtc.tv_sec = RCNR;
-- rtc.tv_nsec = 0;
-- save_time_delta(&delta, &rtc);
-+ printk("11May2006 KERR: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
-+ printk("KER_PM_DELAY: SSCR Going to Sleep at RCNR =%d\n\n\n\n\n\n",RCNR);
-+
-+ /*
-+ * Temporary solution. This won't be necessary once
-+ * we move pxa support into the serial driver
-+ * Save the FF UART
-+ */
-+
-+ // Anup : commented for power saving mode problem
-+ printk("\nPM: Why doesnt it prnt?? 26May06\n");
-+ printk("\nPM : GSM Sleep Mode enabled");
-+
-+
-+ FFMCR &= ~UART_RTS;
-+ udelay(2000);
-+ udelay(2000);
-+ FFMCR &= ~UART_DTR ;
-+ udelay(2000);
-+
-+ udelay(2000);
-+ // rupali
-+ // Anup : Do not check here
-+/* if(!pm_pwronoff)
-+ {
-+ printk("\nPM : Modem Control Register = %x " , FFMCR);
-+ while( FFMSR & 0x00000020)
-+ {
-+ printk("\nPM : FFFSR = %x " , FFMSR);
-+ }
-+ } */
-+ udelay(2000);
-+
-+//Tushar: 19 apr
-+// NSSCR0 &= 0xFFFFFF7F;
-+// printk("\nPM: NSSCR0 = %x" ,NSSCR0 );
-+
-+ SAVE(FFIER);
-+ SAVE(FFLCR);
-+ SAVE(FFMCR);
-+ SAVE(FFSPR);
-+ SAVE(FFISR);
-+ FFLCR |= 0x80;
-+ SAVE(FFDLL);
-+ SAVE(FFDLH);
-+ SAVE(FFFCR);
-+ FFLCR &= 0xef;
-+
-+ SAVE(STIER);
-+ SAVE(STLCR);
-+ SAVE(STMCR);
-+ SAVE(STSPR);
-+ SAVE(STISR);
-+ STLCR |= 0x80;
-+ SAVE(STDLL);
-+ SAVE(STDLH);
-+ STLCR &= 0xef;
-+
-+ SAVE(BTIER);
-+ SAVE(BTLCR);
-+ SAVE(BTMCR);
-+ SAVE(BTSPR);
-+ SAVE(BTISR);
-+ BTLCR |= 0x80;
-+ SAVE(BTDLL);
-+ SAVE(BTDLH);
-+ BTLCR &= 0xef;
-+
-+ /* save vital registers */
-+ SAVE(OSCR);
-+ SAVE(OSMR0);
-+ SAVE(OSMR1);
-+ SAVE(OSMR2);
-+ SAVE(OSMR3);
-+ SAVE(OIER);
-
-- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
- SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
- SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
- SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
-- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
--
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
-
--#ifdef CONFIG_PXA27x
-- SAVE(MDREFR);
-- SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
-- SAVE(GAFR3_L); SAVE(GAFR3_U);
-- SAVE(PWER); SAVE(PCFR); SAVE(PRER);
-- SAVE(PFER); SAVE(PKWR);
--#endif
-+ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
-+ SAVE(LCCR0); SAVE(LCCR1); SAVE(LCCR2); SAVE(LCCR3);
-+ SAVE(FDADR0);
-+ SAVE(FDADR1);
-+ LCSR = 0xffffffff; /* Clear LCD Status Register */
-+
-+// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
-+// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
-+
-+ SAVE(LDCMD0);
-+ // <----- YoKu
-+
-+// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
-+// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
-+
-
- SAVE(ICMR);
- ICMR = 0;
-
- SAVE(CKEN);
-- SAVE(PSTR);
-+ CKEN = 0;
-+
-+ // Anup : For Wifi power saving mode 2 May 2006
-+ SAVE(NSSCR0);SAVE(NSSCR1);SAVE(NSSSR);SAVE(NSSITR);SAVE(NSSDR);SAVE(NSSTO);
-+ SAVE(NSSPSP);
-+ printk("\nMY favourite mode in life.......sleep.....\n");
-+
-
- /* Note: wake up source are set up in each machine specific files */
-
-+ /*Changes to keep the right sim selected */
-+ gpsr0 = GPLR0;
-+ gpsr1 = GPLR1;
-+ gpsr2 = GPLR2;
-+
-+ /*Sim 1 selected */
-+ // YoKu GPIOs Changed ----->
-+ if( (GPLR0 & GPIO_bit(21)) && !(GPLR0 & GPIO_bit(22)) ) // 62,63
-+ {
-+ PGSR0 |= GPIO_bit(21) ; //62
-+ PGSR0 &= ~GPIO_bit(22) ; //63
-+ }
-+ else if (!(GPLR0 & GPIO_bit(21)) && (GPLR0 & GPIO_bit(22)) ) // 62,63
-+ {
-+ PGSR0 |= GPIO_bit(22) ; //63
-+ PGSR0 &= ~GPIO_bit(21) ; //62
-+ } /* sim 2*/
-+ // <----- YoKu
-+
- /* clear GPIO transition detect bits */
- GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
--#ifdef CONFIG_PXA27x
-- GEDR3 = GEDR3;
--#endif
-
- /* Clear sleep reset status */
- RCSR = RCSR_SMR;
-
-+ /* set resume return address */
-+ PSPR = virt_to_phys(pxa_cpu_resume);
-+
- /* before sleeping, calculate and save a checksum */
- for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
- checksum += sleep_save[i];
- sleep_save[SLEEP_SAVE_CKSUM] = checksum;
-
-- /* *** go zzz *** */
-- pxa_cpu_pm_enter(state);
-+ PGSR0 |= GPIO_bit(15); //sidd for wake from Sleep 15, YoKu Comented ?? GPIO15 was ChipSelect
-+ PGSR2 |= GPIO_bit(80); //sidd for GSM Engine 69, YoKu GPIO Changed Anup :commented
-+
-+ PGSR1 &= ~GPIO_bit(33); //Tushar: BT Codec Power Down
-+
-+ PGSR0 &= ~GPIO_bit(23); //Tushar: BGW200 Regulator OFF
-+
-+// GPDR1 |= GPIO_bit(49); //Tushar: LCD Serial Data in changed to O/P
-+
-+// PGSR1 &= ~GPIO_bit(48);//Tushar: LCD Serial Pins
-+
-+// PGSR1 &= ~GPIO_bit(49);
-+
-+// PGSR1 &= ~GPIO_bit(50);
-+
-+// PGSR1 |= GPIO_bit(51);
-+
-+// PGSR1 &= 0x03FFFFFF;//Tushar: 24apr LCD datalines
-+// PGSR2 &= 0xFFFFFC00;
-+
-+ PGSR0 &= ~GPIO_bit(24); //Tushar: Mux Control Signals
-+
-+ PGSR0 &= ~GPIO_bit(25);
-+
-+ PGSR0 &= ~GPIO_bit(26);
-+
-+ PGSR0 &= ~GPIO_bit(27);
-+
-+ // GPDR0 |= GPIO_bit(17); //Tushar: unused GPIOs 19apr
-+ // GPCR0 |= GPIO_bit(17);
-+ PGSR0 &= ~GPIO_bit(17);
-+
-+// GPDR1 |= GPIO_bit(56); //Tushar: unused GPIOs 19apr
-+ // GPCR1 |= GPIO_bit(56);
-+ PGSR1 &= ~GPIO_bit(56);
-+
-+// GPDR2 |= GPIO_bit(79);//Tushar: unused GPIOs 19apr
-+// GPCR2 |= GPIO_bit(79);
-+ PGSR2 &= ~GPIO_bit(79);
-+
-+// GPDR1 |= 0x03F00000;//Tushar: unused GPIOs 19apr
-+// GPCR1 |= 0x03F00000;
-+ PGSR1 &= 0xFC0FFFFF;
-+
-+
-+ GPDR0 |= GPIO_bit(19);//Tushar: SIM Present Inputs configured as outputs
-+ GPDR0 |= GPIO_bit(20);
-+ PGSR0 &= ~GPIO_bit(19);
-+ PGSR0 &= ~GPIO_bit(20);
-+
-+
-+//Tushar: 25apr FFRTS FFDTR & FFTXD
-+
-+ PGSR1 |= GPIO_bit(39);
-+ PGSR1 |= GPIO_bit(40);
-+ PGSR1 |= GPIO_bit(41);
-+/*
-+ PGSR2 &= GPIO_bit(81); //Tushar: 24apr NSSP pins
-+ PGSR2 &= GPIO_bit(82);
-+ PGSR2 &= GPIO_bit(83);
-+
-+ PGSR2 |= GPIO_bit(74);
-+ PGSR2 |= GPIO_bit(75);
-+ PGSR2 |= GPIO_bit(76);
-+ PGSR2 |= GPIO_bit(77);
-+*/
-+ if(pm_pwronoff)
-+ {
-+ /* We are here bcos of pressing of on off switch
-+ We wake up now only on pwr switch */
-+ printk("Anup: Before sleeping \n");
-+ pm_pwronoff = 0;
-+ PGSR0 &= ~GPIO_bit(23); //7 YoKu GPIO Changed
-+ //PGSR2 &= ~GPIO_bit(64); //64 YoKu Commented in PWG500 64,7 was WifiReg, IN PWG600 it is 23
-+
-+ PGSR2 &= ~GPIO_bit(80); //69 YoKu GPIO Changed Anup : commnented
-+ PWER = 0x0004; // YoKu Changed from 0x10 to 0x04 (i.e GPIO 4 -> 2)
-+ PFER = 0x0004;
-+ PRER = 0x0004;
-+
-+// YoKu ---->
-+// 11May2006 To reduce Power Off current from 7mA to 4mA
-+ GPDR0 |= GPIO_bit(16); // BTReset o/p Low
-+ PGSR0 &= ~GPIO_bit(16);
-+
-+ GPDR1 |= GPIO_bit(33); // nMEC/nPDI o/p Low
-+ PGSR1 &= ~GPIO_bit(33);
-+
-+ GPDR1 |= GPIO_bit(45); // BTRTS o/p High
-+ PGSR1 |= GPIO_bit(45);
-+
-+
-+ GPDR1 |= GPIO_bit(43); // BTTXD o/p High
-+ PGSR1 |= GPIO_bit(43);
-+
-+ GPDR1 &= ~GPIO_bit(42); // BTRXD i/p
-+ GPDR1 &= ~GPIO_bit(44); // BTCTS i/p
-+// <---- YoKu
-+
-+ PSPR = virt_to_phys(pxa_cpu_resume); // YoKu 29July05 to Resume from where u left, Original PSPR = 0
-+ }
-+
-+ valbefore = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; // 62,63 YoKu GPIO Changed
-+
-+ //printk("Anup: Before sleeping gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);
-+ //kirti pxa_cpu_suspend();
-+ //printk("KER_PM: Going to sleep zzzzzzzzz\n");
-+
-+// OSCC |= OSCC_OON; //Tushar: 18 apr. enable 32.768KHz Oscillator
-+
-+// PCFR |= PCFR_OPDE; //Tushar: 18 apr. disable 3.6864MHz oscillator
-+
-+ pxa_cpu_pm_enter(PM_SUSPEND_MEM);
-
- cpu_init();
-
-+ //kirti~
-+ /**/
-+ //FFMCR |= UART_DTR ;
-+ /**/
-+
- /* after sleeping, validate the checksum */
- checksum = 0;
- for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
-@@ -141,39 +464,63 @@
- checksum = 0;
- for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
- checksum += sleep_save[i];
--
- /* if invalid, display message and wait for a hardware reset */
-- if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
-+ if (checksum != sleep_save[SLEEP_SAVE_CKSUM])
-+ {
- #ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
- #endif
- while (1)
-- pxa_cpu_pm_enter(state);
-+ {
-+ printk("\n\n\nKERN_PM: CRC Error!!! after wakeup\n\n\n"); // YoKu 25May06
-+
- }
-
-+ }
-+ valafter = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed
-+ pm_pedr = PEDR ;
-+
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
-+ /*printk("YoKu: gafr0_L=0x%08x gafr0_U=0x%08x\n",GAFR0_L,GAFR0_U);
-+ printk(" gafr1_L= 0x%08x gafr1_U= 0x%08x\n",GAFR1_L,GAFR1_U);
-+ printk(" gafr2_L= 0x%08x gafr2_U= 0x%08x\n",GAFR2_L,GAFR2_U); */
- /* restore registers */
-- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
- RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
-+ RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
-+ RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
-- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
-- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
--#ifdef CONFIG_PXA27x
-- RESTORE(MDREFR);
-- RESTORE_GPLEVEL(3); RESTORE(GPDR3);
-- RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-- RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
-- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
-- RESTORE(PFER); RESTORE(PKWR);
--#endif
-
-- PSSR = PSSR_RDH | PSSR_PH;
-+ // Anup : For Wifi power saving mode 2 May 2006
-+ RESTORE(NSSCR0);RESTORE(NSSCR1);RESTORE(NSSSR);RESTORE(NSSITR);RESTORE(NSSDR);RESTORE(NSSTO);
-+ RESTORE(NSSPSP);
-+
-+ // PSSR = PSSR_PH;
-+ GPSR0 = gpsr0;
-+ GPSR1 = gpsr1;
-+ GPSR2 = gpsr2;
-+
-+ // Anup : check values of these registers
-+// printk("YoKu: gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);
-+ //sidd
-+
-+ GPCR0 |= ~gpsr0;
-+ GPCR1 |= ~gpsr1;
-+ GPCR2 |= ~gpsr2;
-+
-+
-+ PSSR = ~PSSR_PH;
-+
-+ RESTORE(OSMR0);
-+ RESTORE(OSMR1);
-+ RESTORE(OSMR2);
-+ RESTORE(OSMR3);
-+ RESTORE(OSCR);
-+ RESTORE(OIER);
-
- RESTORE(CKEN);
-
-@@ -181,62 +528,181 @@
- ICCR = 1;
- RESTORE(ICMR);
-
-- RESTORE(PSTR);
-+ /*
-+ * Temporary solution. This won't be necessary once
-+ * we move pxa support into the serial driver.
-+ * Restore the FF UART.
-+ */
-+ RESTORE(BTMCR);
-+ RESTORE(BTSPR);
-+ RESTORE(BTLCR);
-+ BTLCR |= 0x80;
-+ RESTORE(BTDLH);
-+ RESTORE(BTDLL);
-+ RESTORE(BTLCR);
-+ RESTORE(BTISR);
-+ BTFCR = 0xc7;
-+ RESTORE(BTIER);
-+
-+ RESTORE(STMCR);
-+ RESTORE(STSPR);
-+ RESTORE(STLCR);
-+ STLCR |= 0x80;
-+ RESTORE(STDLH);
-+ RESTORE(STDLL);
-+ RESTORE(STLCR);
-+ RESTORE(STISR);
-+ STFCR = 0xc7;
-+ RESTORE(STIER);
-+
-+ RESTORE(FFMCR);
-+ RESTORE(FFSPR);
-+ RESTORE(FFLCR);
-+ FFLCR |= 0x80;
-+ RESTORE(FFDLH);
-+ RESTORE(FFDLL);
-+ RESTORE(FFLCR);
-+ RESTORE(FFISR);
-+ RESTORE(FFFCR);
-+ FFFCR = 0xc7;
-+ RESTORE(FFIER);
-+
-+ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
-+ RESTORE(LCCR3); RESTORE(LCCR2); RESTORE(LCCR1);
-+ LCCR0=RESTORE(LCCR0) & ~LCCR0_ENB;
-+ RESTORE(FDADR0); RESTORE(FDADR1);
-+ LCCR0 |= LCCR0_ENB;
-+
-+ // <----- YoKu
-
- /* restore current time */
-- rtc.tv_sec = RCNR;
-- restore_time_delta(&delta, &rtc);
-+ xtime.tv_sec = RCNR;
-+
-+ valafter1 = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed
-+
-+// SSCR0 &=0xFFFFFFFF;
-+// printk("\nPM : val of SSCR0 = %x " , SSCR0);
-+
-+ printk("KER_PM: Resumed at RCNR = %d RTSR= %x\n",RCNR,RTSR);
-+
-+ printk("YoKu: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
-+
-+ OSMR0 = 0; /* set initial match at 0 */
-+ OSSR = 0xf; /* clear status on all timers */
-+ OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
-+ OSCR = 0; /* initialize free-running timer, force first match */
-+
-+ leds_event(led_start);
-+ //kirti sti();
-+ // call i2c reset here---->
-+ ICR = ICR_UR;
-+ ISR = 0x7FF; //I2C_ISR_INIT;
-+ ICR &= ~ICR_UR;
-+
-+ ISAR = 0x32;//i2c->slave_addr;
-+
-+ /* set control register values */
-+ ICR = (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE);//I2C_ICR_INIT;
-+
-+ /* enable unit */
-+ ICR |= ICR_IUE;
-+ udelay(100);
-+ //<-----
-+
-+ local_irq_enable();
-
--#ifdef DEBUG
-- printk(KERN_DEBUG "*** made it back from resume\n");
--#endif
-
- return 0;
- }
-
--EXPORT_SYMBOL_GPL(pxa_pm_enter);
--
- unsigned long sleep_phys_sp(void *sp)
- {
- return virt_to_phys(sp);
- }
-
-+#ifdef CONFIG_SYSCTL
- /*
-- * Called after processes are frozen, but before we shut down devices.
-+ * ARGH! ACPI people defined CTL_ACPI in linux/acpi.h rather than
-+ * linux/sysctl.h.
-+ *
-+ * This means our interface here won't survive long - it needs a new
-+ * interface. Quick hack to get this working - use sysctl id 9999.
- */
--int pxa_pm_prepare(suspend_state_t state)
--{
-- extern int pxa_cpu_pm_prepare(suspend_state_t state);
-+#warning ACPI broke the kernel, this interface needs to be fixed up.
-+#define CTL_ACPI 9999
-+#define ACPI_S1_SLP_TYP 19
-
-- return pxa_cpu_pm_prepare(state);
-+/*
-+ * Send us to sleep.
-+ */
-+static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
-+ void *buffer, size_t *lenp)
-+{
-+ int retval=0;
-+ unsigned i , clock ;
-+ if (write)
-+ {
-+ char buf[16], *p;
-+ unsigned int sleepsec;
-+ int len,left = *lenp;
-+
-+ len = left;
-+ if (left > sizeof(buf))
-+ left = sizeof(buf);
-+ if (!copy_from_user(buf, buffer, left))
-+ {
-+ buf[sizeof(buf) - 1] = '\0';
-+ sleepsec = simple_strtoul(buf, &p, 0);
-+ printk("\nSleeping %d Pwronoff=%x RCNR=%d\n",sleepsec,pm_pwronoff,RCNR);
-+ printk("\nPWER %x PFER=%x PRER=%x\n",PWER,PFER,PRER);
-+ RTAR = xtime.tv_sec + sleepsec;
-+ printk("\nRTAR=%d \n",RTAR);
-+ }
-+ }
-+ retval = pm_do_suspend();
-+ clock = get_memclk_frequency_10khz();
-+ return retval;
- }
--
--EXPORT_SYMBOL_GPL(pxa_pm_prepare);
-
- /*
-- * Called after devices are re-setup, but before processes are thawed.
-+static struct ctl_table pm_table[] =
-+{
-+ {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
-+ {0}
-+};
- */
--int pxa_pm_finish(suspend_state_t state)
-+static struct ctl_table pm_table[] =
- {
-- return 0;
-+ {
-+ ctl_name: ACPI_S1_SLP_TYP,
-+ procname: "suspend",
-+ mode: 0600,
-+ proc_handler: (proc_handler *)&sysctl_pm_do_suspend,
-+ },
-+ {
-+ ctl_name: 0
- }
-+};
-
--EXPORT_SYMBOL_GPL(pxa_pm_finish);
-+static struct ctl_table pm_dir_table[] =
-+{
-+ {CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
-+ {0}
-+};
-
- /*
-- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
-+ * Initialize power interface
- */
--static struct pm_ops pxa_pm_ops = {
-- .pm_disk_mode = PM_DISK_FIRMWARE,
-- .prepare = pxa_pm_prepare,
-- .enter = pxa_pm_enter,
-- .finish = pxa_pm_finish,
--};
--
--static int __init pxa_pm_init(void)
-+static int __init pm_init(void)
- {
-- pm_set_ops(&pxa_pm_ops);
-+ register_sysctl_table(pm_dir_table, 1);
-+ /*Adi: Adjust for clock value to RTC
-+ RTTR = RTC clk - 1*/
-+ RTTR = 32913;
-+
- return 0;
- }
-
--device_initcall(pxa_pm_init);
-+__initcall(pm_init);
-+
-+#endif
-diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/sleep.S linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S
---- linux-2.6.17/arch/arm/mach-pxa/sleep.S 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S 2006-09-11 13:07:05.000000000 -0700
-@@ -79,7 +79,7 @@
- ldr r5, [r4]
-
- @ enable SDRAM self-refresh mode
-- orr r5, r5, #MDREFR_SLFRSH
-+ orr r5, r5, #(MDREFR_SLFRSH | MDREFR_APD)
-
- #ifdef CONFIG_PXA27x
- @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
-diff -NurbwB linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h
---- linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h 2006-09-11 11:04:36.000000000 -0700
-@@ -1748,6 +1748,15 @@
- #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
- #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
-
-+#define NSSCR0 __REG(0x41400000) /* SSP Port 1 Control Register 0 */
-+#define NSSCR1 __REG(0x41400004) /* SSP Port 1 Control Register 1 */
-+#define NSSSR __REG(0x41400008) /* SSP Port 1 Status Register */
-+#define NSSITR __REG(0x4140000C) /* SSP Port 1 Interrupt Test Register */
-+#define NSSDR __REG(0x41400010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
-+#define NSSTO __REG(0x41400028) /* SSP Port 1 Time Out Register */
-+#define NSSPSP __REG(0x4140002C) /* SSP Port 1 Programmable Serial Port Register */
-+
-+
- /*
- * MultiMediaCard (MMC) controller
- */
-diff -NurbwB linux-2.6.17/kernel/power/main.c linux-2.6.17-patched/kernel/power/main.c
---- linux-2.6.17/kernel/power/main.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/kernel/power/main.c 2006-09-11 12:59:20.000000000 -0700
-@@ -66,10 +66,12 @@
- goto Enable_cpu;
- }
-
-+ /*
- if (freeze_processes()) {
- error = -EAGAIN;
- goto Thaw;
- }
-+ */
-
- if ((free_pages = nr_free_pages()) < FREE_PAGE_NUMBER) {
- pr_debug("PM: free some memory\n");
-@@ -110,12 +112,15 @@
-
- local_irq_save(flags);
-
-+ /*
- if ((error = device_power_down(PMSG_SUSPEND))) {
- printk(KERN_ERR "Some devices failed to power down\n");
- goto Done;
- }
-+ */
-+
- error = pm_ops->enter(state);
-- device_power_up();
-+ //device_power_up();
- Done:
- local_irq_restore(flags);
- return error;
diff --git a/target/linux/pxa-2.6/patches/002-usb_gadget.patch b/target/linux/pxa-2.6/patches/002-usb_gadget.patch
deleted file mode 100644
index b6766d9b3..000000000
--- a/target/linux/pxa-2.6/patches/002-usb_gadget.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-diff -NurbwB linux-2.6.17/drivers/usb/gadget/pxa2xx_udc.c linux-2.6.17-patched/drivers/usb/gadget/pxa2xx_udc.c
---- linux-2.6.17/drivers/usb/gadget/pxa2xx_udc.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/drivers/usb/gadget/pxa2xx_udc.c 2006-09-11 13:02:39.000000000 -0700
-@@ -87,8 +87,8 @@
- static const char ep0name [] = "ep0";
-
-
--// #define USE_DMA
--// #define USE_OUT_DMA
-+#define USE_DMA
-+#define USE_OUT_DMA
- // #define DISABLE_TEST_MODE
-
- #ifdef CONFIG_ARCH_IXP4XX
-@@ -1513,7 +1513,7 @@
- #endif
-
- /* try to clear these bits before we enable the udc */
-- udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
-+ udc_ack_int_UDCCR(UDCCR_SUSIR|UDCCR_RSTIR|UDCCR_RESIR);
-
- ep0_idle(dev);
- dev->gadget.speed = USB_SPEED_UNKNOWN;
-@@ -2043,6 +2043,9 @@
- struct pxa2xx_udc *dev = _dev;
- int handled;
-
-+
-+ udc_set_mask_UDCCR( UDCCR_REM | UDCCR_SRM);
-+
- dev->stats.irqs++;
- HEX_DISPLAY(dev->stats.irqs);
- do {
-@@ -2137,6 +2139,8 @@
- /* we could also ask for 1 msec SOF (SIR) interrupts */
-
- } while (handled);
-+
-+ udc_clear_mask_UDCCR( UDCCR_SRM | UDCCR_REM);
- return IRQ_HANDLED;
- }
-
-@@ -2437,6 +2441,7 @@
- int retval, out_dma = 1;
- u32 chiprev;
-
-+ local_irq_disable();
- /* insist on Intel/ARM/XScale */
- asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
- if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
-@@ -2553,6 +2558,7 @@
- #endif
- }
- #endif
-+ local_irq_enable();
- create_proc_files();
-
- return 0;
diff --git a/target/linux/pxa-2.6/patches/004-skbuf_hack.patch b/target/linux/pxa-2.6/patches/004-skbuf_hack.patch
deleted file mode 100644
index 434e3b98b..000000000
--- a/target/linux/pxa-2.6/patches/004-skbuf_hack.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-2.6.17/include/linux/skbuff.h 2006-09-20 16:13:42.000000000 -0700
-+++ linux-2.6.17-patched/include/linux/skbuff.h 2006-09-20 16:14:29.000000000 -0700
-@@ -239,6 +239,7 @@
- } nh;
-
- union {
-+ struct ethhdr *ethernet;
- unsigned char *raw;
- } mac;
-
diff --git a/target/linux/pxa-2.6/patches/005-mtd.patch b/target/linux/pxa-2.6/patches/005-mtd.patch
deleted file mode 100644
index 6156b6a93..000000000
--- a/target/linux/pxa-2.6/patches/005-mtd.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-diff -Nurb linux-2.6.17/drivers/mtd/chips/cfi_cmdset_0001.c linux-2.6.17-patched/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux-2.6.17/drivers/mtd/chips/cfi_cmdset_0001.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/drivers/mtd/chips/cfi_cmdset_0001.c 2006-09-25 11:27:06.000000000 -0700
-@@ -40,7 +40,7 @@
- /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
-
- // debugging, turns off buffer write mode if set to 1
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MANUFACTURER_INTEL 0x0089
- #define I82802AB 0x00ad
-diff -Nurb linux-2.6.17/drivers/mtd/maps/lubbock-flash.c linux-2.6.17-patched/drivers/mtd/maps/lubbock-flash.c
---- linux-2.6.17/drivers/mtd/maps/lubbock-flash.c 2006-06-17 18:49:35.000000000 -0700
-+++ linux-2.6.17-patched/drivers/mtd/maps/lubbock-flash.c 2006-09-25 10:50:08.000000000 -0700
-@@ -26,6 +26,7 @@
- #include <asm/hardware.h>
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/lubbock.h>
-+#include <linux/mtd/concat.h>
-
-
- #define ROM_ADDR 0x00000000
-@@ -48,24 +49,27 @@
- .inval_cache = lubbock_map_inval_cache,
- } };
-
--static struct mtd_partition lubbock_partitions[] = {
-+static struct mtd_partition lubbock_partitions[] =
-+{
- {
-- .name = "Bootloader",
-- .size = 0x00040000,
-- .offset = 0,
-- .mask_flags = MTD_WRITEABLE /* force read-only */
-- },{
-- .name = "Kernel",
-- .size = 0x00100000,
-- .offset = 0x00040000,
-- },{
-- .name = "Filesystem",
-- .size = MTDPART_SIZ_FULL,
-- .offset = 0x00140000
-- }
-+ .name = "root",
-+ .offset = 0x00410000
-+ },
-+ {
-+ .name = "kernel",
-+ .size = 0x00150000,
-+ .offset = 0x000B0000
-+ },
-+ {
-+ .name = "bootloader",
-+ .size = 0x000B0000,
-+ .offset = 0x00000000
-+ },
- };
-
-+
- static struct mtd_info *mymtds[2];
-+static struct mtd_info *merged_mtd;
- static struct mtd_partition *parsed_parts[2];
- static int nr_parsed_parts[2];
-
-@@ -83,8 +87,8 @@
- printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
- flashboot?"Flash":"ROM", flashboot);
-
-- lubbock_maps[flashboot^1].name = "Lubbock Application Flash";
-- lubbock_maps[flashboot].name = "Lubbock Boot ROM";
-+ lubbock_maps[flashboot^1].name = "Flash-1";
-+ lubbock_maps[flashboot].name = "Flash-0";
-
- for (i = 0; i < 2; i++) {
- lubbock_maps[i].virt = ioremap(lubbock_maps[i].phys, WINDOW_SIZE);
-@@ -125,25 +129,23 @@
- if (!mymtds[0] && !mymtds[1])
- return ret;
-
-- for (i = 0; i < 2; i++) {
-- if (!mymtds[i]) {
-- printk(KERN_WARNING "%s is absent. Skipping\n", lubbock_maps[i].name);
-- } else if (nr_parsed_parts[i]) {
-- add_mtd_partitions(mymtds[i], parsed_parts[i], nr_parsed_parts[i]);
-- } else if (!i) {
-- printk("Using static partitions on %s\n", lubbock_maps[i].name);
-- add_mtd_partitions(mymtds[i], lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
-- } else {
-- printk("Registering %s as whole device\n", lubbock_maps[i].name);
-- add_mtd_device(mymtds[i]);
-- }
-- }
-+ if (mymtds[0] && mymtds[1]) {
-+ merged_mtd = mtd_concat_create(mymtds, 2, "Concated Flash #1 and #2");
-+ if(merged_mtd)
-+ add_mtd_partitions(merged_mtd, lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
-+ else
-+ printk("YoKu: Failed to concate\n");
- return 0;
-+ }
- }
-
- static void __exit cleanup_lubbock(void)
- {
- int i;
-+
-+ del_mtd_partitions(merged_mtd);
-+ map_destroy(merged_mtd);
-+
- for (i = 0; i < 2; i++) {